| /* | 
 |  * linux/drivers/pcmcia/pxa2xx_stargate2.c | 
 |  * | 
 |  * Stargate 2 PCMCIA specific routines. | 
 |  * | 
 |  * Created:	December 6, 2005 | 
 |  * Author:	Ed C. Epp | 
 |  * Copyright:	Intel Corp 2005 | 
 |  *              Jonathan Cameron <jic23@cam.ac.uk> 2009 | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/gpio.h> | 
 |  | 
 | #include <pcmcia/ss.h> | 
 |  | 
 | #include <asm/irq.h> | 
 | #include <asm/mach-types.h> | 
 |  | 
 | #include "soc_common.h" | 
 |  | 
 | #define SG2_S0_POWER_CTL	108 | 
 | #define SG2_S0_GPIO_RESET	82 | 
 | #define SG2_S0_GPIO_DETECT	53 | 
 | #define SG2_S0_GPIO_READY	81 | 
 |  | 
 | static struct gpio sg2_pcmcia_gpios[] = { | 
 | 	{ SG2_S0_GPIO_RESET, GPIOF_OUT_INIT_HIGH, "PCMCIA Reset" }, | 
 | 	{ SG2_S0_POWER_CTL, GPIOF_OUT_INIT_HIGH, "PCMCIA Power Ctrl" }, | 
 | }; | 
 |  | 
 | static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt) | 
 | { | 
 | 	skt->stat[SOC_STAT_CD].gpio = SG2_S0_GPIO_DETECT; | 
 | 	skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD"; | 
 | 	skt->stat[SOC_STAT_RDY].gpio = SG2_S0_GPIO_READY; | 
 | 	skt->stat[SOC_STAT_RDY].name = "PCMCIA0 RDY"; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt, | 
 | 				    struct pcmcia_state *state) | 
 | { | 
 | 	state->bvd1   = 0; /* not available - battery detect on card */ | 
 | 	state->bvd2   = 0; /* not available */ | 
 | 	state->vs_3v  = 1; /* not available - voltage detect for card */ | 
 | 	state->vs_Xv  = 0; /* not available */ | 
 | } | 
 |  | 
 | static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, | 
 | 				       const socket_state_t *state) | 
 | { | 
 | 	/* Enable card power */ | 
 | 	switch (state->Vcc) { | 
 | 	case 0: | 
 | 		/* sets power ctl register high */ | 
 | 		gpio_set_value(SG2_S0_POWER_CTL, 1); | 
 | 		break; | 
 | 	case 33: | 
 | 	case 50: | 
 | 		/* sets power control register low (clear) */ | 
 | 		gpio_set_value(SG2_S0_POWER_CTL, 0); | 
 | 		msleep(100); | 
 | 		break; | 
 | 	default: | 
 | 		pr_err("%s(): bad Vcc %u\n", | 
 | 		       __func__, state->Vcc); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	/* reset */ | 
 | 	gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct pcmcia_low_level sg2_pcmcia_ops __initdata = { | 
 | 	.owner			= THIS_MODULE, | 
 | 	.hw_init		= sg2_pcmcia_hw_init, | 
 | 	.socket_state		= sg2_pcmcia_socket_state, | 
 | 	.configure_socket	= sg2_pcmcia_configure_socket, | 
 | 	.nr			= 1, | 
 | }; | 
 |  | 
 | static struct platform_device *sg2_pcmcia_device; | 
 |  | 
 | static int __init sg2_pcmcia_init(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (!machine_is_stargate2()) | 
 | 		return -ENODEV; | 
 |  | 
 | 	sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); | 
 | 	if (!sg2_pcmcia_device) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = gpio_request_array(sg2_pcmcia_gpios, ARRAY_SIZE(sg2_pcmcia_gpios)); | 
 | 	if (ret) | 
 | 		goto error_put_platform_device; | 
 |  | 
 | 	ret = platform_device_add_data(sg2_pcmcia_device, | 
 | 				       &sg2_pcmcia_ops, | 
 | 				       sizeof(sg2_pcmcia_ops)); | 
 | 	if (ret) | 
 | 		goto error_free_gpios; | 
 |  | 
 | 	ret = platform_device_add(sg2_pcmcia_device); | 
 | 	if (ret) | 
 | 		goto error_free_gpios; | 
 |  | 
 | 	return 0; | 
 | error_free_gpios: | 
 | 	gpio_free_array(sg2_pcmcia_gpios, ARRAY_SIZE(sg2_pcmcia_gpios)); | 
 | error_put_platform_device: | 
 | 	platform_device_put(sg2_pcmcia_device); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit sg2_pcmcia_exit(void) | 
 | { | 
 | 	platform_device_unregister(sg2_pcmcia_device); | 
 | 	gpio_free_array(sg2_pcmcia_gpios, ARRAY_SIZE(sg2_pcmcia_gpios)); | 
 | } | 
 |  | 
 | fs_initcall(sg2_pcmcia_init); | 
 | module_exit(sg2_pcmcia_exit); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:pxa2xx-pcmcia"); |