| /* |
| * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC |
| * |
| * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> |
| * |
| * Licensed under GPLv2 or later |
| */ |
| |
| /include/ "skeleton.dtsi" |
| |
| / { |
| compatible = "wm,wm8750"; |
| |
| cpus { |
| #address-cells = <0>; |
| #size-cells = <0>; |
| |
| cpu { |
| device_type = "cpu"; |
| compatible = "arm,arm1176jzf"; |
| }; |
| }; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| serial3 = &uart3; |
| serial4 = &uart4; |
| serial5 = &uart5; |
| i2c0 = &i2c_0; |
| i2c1 = &i2c_1; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges; |
| interrupt-parent = <&intc0>; |
| |
| intc0: interrupt-controller@d8140000 { |
| compatible = "via,vt8500-intc"; |
| interrupt-controller; |
| reg = <0xd8140000 0x10000>; |
| #interrupt-cells = <1>; |
| }; |
| |
| /* Secondary IC cascaded to intc0 */ |
| intc1: interrupt-controller@d8150000 { |
| compatible = "via,vt8500-intc"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0xD8150000 0x10000>; |
| interrupts = <56 57 58 59 60 61 62 63>; |
| }; |
| |
| pinctrl: pinctrl@d8110000 { |
| compatible = "wm,wm8750-pinctrl"; |
| reg = <0xd8110000 0x10000>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| pmc@d8130000 { |
| compatible = "via,vt8500-pmc"; |
| reg = <0xd8130000 0x1000>; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ref24: ref24M { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| |
| ref25: ref25M { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <25000000>; |
| }; |
| |
| plla: plla { |
| #clock-cells = <0>; |
| compatible = "wm,wm8750-pll-clock"; |
| clocks = <&ref25>; |
| reg = <0x200>; |
| }; |
| |
| pllb: pllb { |
| #clock-cells = <0>; |
| compatible = "wm,wm8750-pll-clock"; |
| clocks = <&ref25>; |
| reg = <0x204>; |
| }; |
| |
| pllc: pllc { |
| #clock-cells = <0>; |
| compatible = "wm,wm8750-pll-clock"; |
| clocks = <&ref25>; |
| reg = <0x208>; |
| }; |
| |
| plld: plld { |
| #clock-cells = <0>; |
| compatible = "wm,wm8750-pll-clock"; |
| clocks = <&ref25>; |
| reg = <0x20C>; |
| }; |
| |
| plle: plle { |
| #clock-cells = <0>; |
| compatible = "wm,wm8750-pll-clock"; |
| clocks = <&ref25>; |
| reg = <0x210>; |
| }; |
| |
| clkarm: arm { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&plla>; |
| divisor-reg = <0x300>; |
| }; |
| |
| clkahb: ahb { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&pllb>; |
| divisor-reg = <0x304>; |
| }; |
| |
| clkapb: apb { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&pllb>; |
| divisor-reg = <0x320>; |
| }; |
| |
| clkddr: ddr { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&plld>; |
| divisor-reg = <0x310>; |
| }; |
| |
| clkuart0: uart0 { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&ref24>; |
| enable-reg = <0x254>; |
| enable-bit = <24>; |
| }; |
| |
| clkuart1: uart1 { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&ref24>; |
| enable-reg = <0x254>; |
| enable-bit = <25>; |
| }; |
| |
| clkuart2: uart2 { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&ref24>; |
| enable-reg = <0x254>; |
| enable-bit = <26>; |
| }; |
| |
| clkuart3: uart3 { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&ref24>; |
| enable-reg = <0x254>; |
| enable-bit = <27>; |
| }; |
| |
| clkuart4: uart4 { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&ref24>; |
| enable-reg = <0x254>; |
| enable-bit = <28>; |
| }; |
| |
| clkuart5: uart5 { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&ref24>; |
| enable-reg = <0x254>; |
| enable-bit = <29>; |
| }; |
| |
| clkpwm: pwm { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&pllb>; |
| divisor-reg = <0x350>; |
| enable-reg = <0x250>; |
| enable-bit = <17>; |
| }; |
| |
| clksdhc: sdhc { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&pllb>; |
| divisor-reg = <0x330>; |
| divisor-mask = <0x3f>; |
| enable-reg = <0x250>; |
| enable-bit = <0>; |
| }; |
| |
| clki2c0: i2c0clk { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&pllb>; |
| divisor-reg = <0x3A0>; |
| enable-reg = <0x250>; |
| enable-bit = <8>; |
| }; |
| |
| clki2c1: i2c1clk { |
| #clock-cells = <0>; |
| compatible = "via,vt8500-device-clock"; |
| clocks = <&pllb>; |
| divisor-reg = <0x3A4>; |
| enable-reg = <0x250>; |
| enable-bit = <9>; |
| }; |
| }; |
| }; |
| |
| pwm: pwm@d8220000 { |
| #pwm-cells = <3>; |
| compatible = "via,vt8500-pwm"; |
| reg = <0xd8220000 0x100>; |
| clocks = <&clkpwm>; |
| }; |
| |
| timer@d8130100 { |
| compatible = "via,vt8500-timer"; |
| reg = <0xd8130100 0x28>; |
| interrupts = <36>; |
| }; |
| |
| ehci@d8007900 { |
| compatible = "via,vt8500-ehci"; |
| reg = <0xd8007900 0x200>; |
| interrupts = <26>; |
| }; |
| |
| uhci@d8007b00 { |
| compatible = "platform-uhci"; |
| reg = <0xd8007b00 0x200>; |
| interrupts = <26>; |
| }; |
| |
| uhci@d8008d00 { |
| compatible = "platform-uhci"; |
| reg = <0xd8008d00 0x200>; |
| interrupts = <26>; |
| }; |
| |
| uart0: serial@d8200000 { |
| compatible = "via,vt8500-uart"; |
| reg = <0xd8200000 0x1040>; |
| interrupts = <32>; |
| clocks = <&clkuart0>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@d82b0000 { |
| compatible = "via,vt8500-uart"; |
| reg = <0xd82b0000 0x1040>; |
| interrupts = <33>; |
| clocks = <&clkuart1>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@d8210000 { |
| compatible = "via,vt8500-uart"; |
| reg = <0xd8210000 0x1040>; |
| interrupts = <47>; |
| clocks = <&clkuart2>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@d82c0000 { |
| compatible = "via,vt8500-uart"; |
| reg = <0xd82c0000 0x1040>; |
| interrupts = <50>; |
| clocks = <&clkuart3>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@d8370000 { |
| compatible = "via,vt8500-uart"; |
| reg = <0xd8370000 0x1040>; |
| interrupts = <30>; |
| clocks = <&clkuart4>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@d8380000 { |
| compatible = "via,vt8500-uart"; |
| reg = <0xd8380000 0x1040>; |
| interrupts = <43>; |
| clocks = <&clkuart5>; |
| status = "disabled"; |
| }; |
| |
| rtc@d8100000 { |
| compatible = "via,vt8500-rtc"; |
| reg = <0xd8100000 0x10000>; |
| interrupts = <48>; |
| }; |
| |
| sdhc@d800a000 { |
| compatible = "wm,wm8505-sdhc"; |
| reg = <0xd800a000 0x1000>; |
| interrupts = <20 21>; |
| clocks = <&clksdhc>; |
| bus-width = <4>; |
| sdon-inverted; |
| }; |
| |
| i2c_0: i2c@d8280000 { |
| compatible = "wm,wm8505-i2c"; |
| reg = <0xd8280000 0x1000>; |
| interrupts = <19>; |
| clocks = <&clki2c0>; |
| clock-frequency = <400000>; |
| }; |
| |
| i2c_1: i2c@d8320000 { |
| compatible = "wm,wm8505-i2c"; |
| reg = <0xd8320000 0x1000>; |
| interrupts = <18>; |
| clocks = <&clki2c1>; |
| clock-frequency = <400000>; |
| }; |
| }; |
| }; |
