| /* Copyright (c) 2014, Sony Mobile Communications Inc. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 and | 
 |  * only version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * This driver is for the multi-block Switch-Mode Battery Charger and Boost | 
 |  * (SMBB) hardware, found in Qualcomm PM8941 PMICs.  The charger is an | 
 |  * integrated, single-cell lithium-ion battery charger. | 
 |  * | 
 |  * Sub-components: | 
 |  *  - Charger core | 
 |  *  - Buck | 
 |  *  - DC charge-path | 
 |  *  - USB charge-path | 
 |  *  - Battery interface | 
 |  *  - Boost (not implemented) | 
 |  *  - Misc | 
 |  *  - HF-Buck | 
 |  */ | 
 |  | 
 | #include <linux/errno.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/of.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/power_supply.h> | 
 | #include <linux/regmap.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/extcon.h> | 
 |  | 
 | #define SMBB_CHG_VMAX		0x040 | 
 | #define SMBB_CHG_VSAFE		0x041 | 
 | #define SMBB_CHG_CFG		0x043 | 
 | #define SMBB_CHG_IMAX		0x044 | 
 | #define SMBB_CHG_ISAFE		0x045 | 
 | #define SMBB_CHG_VIN_MIN	0x047 | 
 | #define SMBB_CHG_CTRL		0x049 | 
 | #define CTRL_EN			BIT(7) | 
 | #define SMBB_CHG_VBAT_WEAK	0x052 | 
 | #define SMBB_CHG_IBAT_TERM_CHG	0x05b | 
 | #define IBAT_TERM_CHG_IEOC	BIT(7) | 
 | #define IBAT_TERM_CHG_IEOC_BMS	BIT(7) | 
 | #define IBAT_TERM_CHG_IEOC_CHG	0 | 
 | #define SMBB_CHG_VBAT_DET	0x05d | 
 | #define SMBB_CHG_TCHG_MAX_EN	0x060 | 
 | #define TCHG_MAX_EN		BIT(7) | 
 | #define SMBB_CHG_WDOG_TIME	0x062 | 
 | #define SMBB_CHG_WDOG_EN	0x065 | 
 | #define WDOG_EN			BIT(7) | 
 |  | 
 | #define SMBB_BUCK_REG_MODE	0x174 | 
 | #define BUCK_REG_MODE		BIT(0) | 
 | #define BUCK_REG_MODE_VBAT	BIT(0) | 
 | #define BUCK_REG_MODE_VSYS	0 | 
 |  | 
 | #define SMBB_BAT_PRES_STATUS	0x208 | 
 | #define PRES_STATUS_BAT_PRES	BIT(7) | 
 | #define SMBB_BAT_TEMP_STATUS	0x209 | 
 | #define TEMP_STATUS_OK		BIT(7) | 
 | #define TEMP_STATUS_HOT		BIT(6) | 
 | #define SMBB_BAT_BTC_CTRL	0x249 | 
 | #define BTC_CTRL_COMP_EN	BIT(7) | 
 | #define BTC_CTRL_COLD_EXT	BIT(1) | 
 | #define BTC_CTRL_HOT_EXT_N	BIT(0) | 
 |  | 
 | #define SMBB_USB_IMAX		0x344 | 
 | #define SMBB_USB_ENUM_TIMER_STOP 0x34e | 
 | #define ENUM_TIMER_STOP		BIT(0) | 
 | #define SMBB_USB_SEC_ACCESS	0x3d0 | 
 | #define SEC_ACCESS_MAGIC	0xa5 | 
 | #define SMBB_USB_REV_BST	0x3ed | 
 | #define REV_BST_CHG_GONE	BIT(7) | 
 |  | 
 | #define SMBB_DC_IMAX		0x444 | 
 |  | 
 | #define SMBB_MISC_REV2		0x601 | 
 | #define SMBB_MISC_BOOT_DONE	0x642 | 
 | #define BOOT_DONE		BIT(7) | 
 |  | 
 | #define STATUS_USBIN_VALID	BIT(0) /* USB connection is valid */ | 
 | #define STATUS_DCIN_VALID	BIT(1) /* DC connection is valid */ | 
 | #define STATUS_BAT_HOT		BIT(2) /* Battery temp 1=Hot, 0=Cold */ | 
 | #define STATUS_BAT_OK		BIT(3) /* Battery temp OK */ | 
 | #define STATUS_BAT_PRESENT	BIT(4) /* Battery is present */ | 
 | #define STATUS_CHG_DONE		BIT(5) /* Charge cycle is complete */ | 
 | #define STATUS_CHG_TRKL		BIT(6) /* Trickle charging */ | 
 | #define STATUS_CHG_FAST		BIT(7) /* Fast charging */ | 
 | #define STATUS_CHG_GONE		BIT(8) /* No charger is connected */ | 
 |  | 
 | enum smbb_attr { | 
 | 	ATTR_BAT_ISAFE, | 
 | 	ATTR_BAT_IMAX, | 
 | 	ATTR_USBIN_IMAX, | 
 | 	ATTR_DCIN_IMAX, | 
 | 	ATTR_BAT_VSAFE, | 
 | 	ATTR_BAT_VMAX, | 
 | 	ATTR_BAT_VMIN, | 
 | 	ATTR_CHG_VDET, | 
 | 	ATTR_VIN_MIN, | 
 | 	_ATTR_CNT, | 
 | }; | 
 |  | 
 | struct smbb_charger { | 
 | 	unsigned int revision; | 
 | 	unsigned int addr; | 
 | 	struct device *dev; | 
 | 	struct extcon_dev *edev; | 
 |  | 
 | 	bool dc_disabled; | 
 | 	bool jeita_ext_temp; | 
 | 	unsigned long status; | 
 | 	struct mutex statlock; | 
 |  | 
 | 	unsigned int attr[_ATTR_CNT]; | 
 |  | 
 | 	struct power_supply *usb_psy; | 
 | 	struct power_supply *dc_psy; | 
 | 	struct power_supply *bat_psy; | 
 | 	struct regmap *regmap; | 
 | }; | 
 |  | 
 | static const unsigned int smbb_usb_extcon_cable[] = { | 
 | 	EXTCON_USB, | 
 | 	EXTCON_NONE, | 
 | }; | 
 |  | 
 | static int smbb_vbat_weak_fn(unsigned int index) | 
 | { | 
 | 	return 2100000 + index * 100000; | 
 | } | 
 |  | 
 | static int smbb_vin_fn(unsigned int index) | 
 | { | 
 | 	if (index > 42) | 
 | 		return 5600000 + (index - 43) * 200000; | 
 | 	return 3400000 + index * 50000; | 
 | } | 
 |  | 
 | static int smbb_vmax_fn(unsigned int index) | 
 | { | 
 | 	return 3240000 + index * 10000; | 
 | } | 
 |  | 
 | static int smbb_vbat_det_fn(unsigned int index) | 
 | { | 
 | 	return 3240000 + index * 20000; | 
 | } | 
 |  | 
 | static int smbb_imax_fn(unsigned int index) | 
 | { | 
 | 	if (index < 2) | 
 | 		return 100000 + index * 50000; | 
 | 	return index * 100000; | 
 | } | 
 |  | 
 | static int smbb_bat_imax_fn(unsigned int index) | 
 | { | 
 | 	return index * 50000; | 
 | } | 
 |  | 
 | static unsigned int smbb_hw_lookup(unsigned int val, int (*fn)(unsigned int)) | 
 | { | 
 | 	unsigned int widx; | 
 | 	unsigned int sel; | 
 |  | 
 | 	for (widx = sel = 0; (*fn)(widx) <= val; ++widx) | 
 | 		sel = widx; | 
 |  | 
 | 	return sel; | 
 | } | 
 |  | 
 | static const struct smbb_charger_attr { | 
 | 	const char *name; | 
 | 	unsigned int reg; | 
 | 	unsigned int safe_reg; | 
 | 	unsigned int max; | 
 | 	unsigned int min; | 
 | 	unsigned int fail_ok; | 
 | 	int (*hw_fn)(unsigned int); | 
 | } smbb_charger_attrs[] = { | 
 | 	[ATTR_BAT_ISAFE] = { | 
 | 		.name = "qcom,fast-charge-safe-current", | 
 | 		.reg = SMBB_CHG_ISAFE, | 
 | 		.max = 3000000, | 
 | 		.min = 200000, | 
 | 		.hw_fn = smbb_bat_imax_fn, | 
 | 		.fail_ok = 1, | 
 | 	}, | 
 | 	[ATTR_BAT_IMAX] = { | 
 | 		.name = "qcom,fast-charge-current-limit", | 
 | 		.reg = SMBB_CHG_IMAX, | 
 | 		.safe_reg = SMBB_CHG_ISAFE, | 
 | 		.max = 3000000, | 
 | 		.min = 200000, | 
 | 		.hw_fn = smbb_bat_imax_fn, | 
 | 	}, | 
 | 	[ATTR_DCIN_IMAX] = { | 
 | 		.name = "qcom,dc-current-limit", | 
 | 		.reg = SMBB_DC_IMAX, | 
 | 		.max = 2500000, | 
 | 		.min = 100000, | 
 | 		.hw_fn = smbb_imax_fn, | 
 | 	}, | 
 | 	[ATTR_BAT_VSAFE] = { | 
 | 		.name = "qcom,fast-charge-safe-voltage", | 
 | 		.reg = SMBB_CHG_VSAFE, | 
 | 		.max = 5000000, | 
 | 		.min = 3240000, | 
 | 		.hw_fn = smbb_vmax_fn, | 
 | 		.fail_ok = 1, | 
 | 	}, | 
 | 	[ATTR_BAT_VMAX] = { | 
 | 		.name = "qcom,fast-charge-high-threshold-voltage", | 
 | 		.reg = SMBB_CHG_VMAX, | 
 | 		.safe_reg = SMBB_CHG_VSAFE, | 
 | 		.max = 5000000, | 
 | 		.min = 3240000, | 
 | 		.hw_fn = smbb_vmax_fn, | 
 | 	}, | 
 | 	[ATTR_BAT_VMIN] = { | 
 | 		.name = "qcom,fast-charge-low-threshold-voltage", | 
 | 		.reg = SMBB_CHG_VBAT_WEAK, | 
 | 		.max = 3600000, | 
 | 		.min = 2100000, | 
 | 		.hw_fn = smbb_vbat_weak_fn, | 
 | 	}, | 
 | 	[ATTR_CHG_VDET] = { | 
 | 		.name = "qcom,auto-recharge-threshold-voltage", | 
 | 		.reg = SMBB_CHG_VBAT_DET, | 
 | 		.max = 5000000, | 
 | 		.min = 3240000, | 
 | 		.hw_fn = smbb_vbat_det_fn, | 
 | 	}, | 
 | 	[ATTR_VIN_MIN] = { | 
 | 		.name = "qcom,minimum-input-voltage", | 
 | 		.reg = SMBB_CHG_VIN_MIN, | 
 | 		.max = 9600000, | 
 | 		.min = 4200000, | 
 | 		.hw_fn = smbb_vin_fn, | 
 | 	}, | 
 | 	[ATTR_USBIN_IMAX] = { | 
 | 		.name = "usb-charge-current-limit", | 
 | 		.reg = SMBB_USB_IMAX, | 
 | 		.max = 2500000, | 
 | 		.min = 100000, | 
 | 		.hw_fn = smbb_imax_fn, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int smbb_charger_attr_write(struct smbb_charger *chg, | 
 | 		enum smbb_attr which, unsigned int val) | 
 | { | 
 | 	const struct smbb_charger_attr *prop; | 
 | 	unsigned int wval; | 
 | 	unsigned int out; | 
 | 	int rc; | 
 |  | 
 | 	prop = &smbb_charger_attrs[which]; | 
 |  | 
 | 	if (val > prop->max || val < prop->min) { | 
 | 		dev_err(chg->dev, "value out of range for %s [%u:%u]\n", | 
 | 			prop->name, prop->min, prop->max); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (prop->safe_reg) { | 
 | 		rc = regmap_read(chg->regmap, | 
 | 				chg->addr + prop->safe_reg, &wval); | 
 | 		if (rc) { | 
 | 			dev_err(chg->dev, | 
 | 				"unable to read safe value for '%s'\n", | 
 | 				prop->name); | 
 | 			return rc; | 
 | 		} | 
 |  | 
 | 		wval = prop->hw_fn(wval); | 
 |  | 
 | 		if (val > wval) { | 
 | 			dev_warn(chg->dev, | 
 | 				"%s above safe value, clamping at %u\n", | 
 | 				prop->name, wval); | 
 | 			val = wval; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	wval = smbb_hw_lookup(val, prop->hw_fn); | 
 |  | 
 | 	rc = regmap_write(chg->regmap, chg->addr + prop->reg, wval); | 
 | 	if (rc) { | 
 | 		dev_err(chg->dev, "unable to update %s", prop->name); | 
 | 		return rc; | 
 | 	} | 
 | 	out = prop->hw_fn(wval); | 
 | 	if (out != val) { | 
 | 		dev_warn(chg->dev, | 
 | 			"%s inaccurate, rounded to %u\n", | 
 | 			prop->name, out); | 
 | 	} | 
 |  | 
 | 	dev_dbg(chg->dev, "%s <= %d\n", prop->name, out); | 
 |  | 
 | 	chg->attr[which] = out; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int smbb_charger_attr_read(struct smbb_charger *chg, | 
 | 		enum smbb_attr which) | 
 | { | 
 | 	const struct smbb_charger_attr *prop; | 
 | 	unsigned int val; | 
 | 	int rc; | 
 |  | 
 | 	prop = &smbb_charger_attrs[which]; | 
 |  | 
 | 	rc = regmap_read(chg->regmap, chg->addr + prop->reg, &val); | 
 | 	if (rc) { | 
 | 		dev_err(chg->dev, "failed to read %s\n", prop->name); | 
 | 		return rc; | 
 | 	} | 
 | 	val = prop->hw_fn(val); | 
 | 	dev_dbg(chg->dev, "%s => %d\n", prop->name, val); | 
 |  | 
 | 	chg->attr[which] = val; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int smbb_charger_attr_parse(struct smbb_charger *chg, | 
 | 		enum smbb_attr which) | 
 | { | 
 | 	const struct smbb_charger_attr *prop; | 
 | 	unsigned int val; | 
 | 	int rc; | 
 |  | 
 | 	prop = &smbb_charger_attrs[which]; | 
 |  | 
 | 	rc = of_property_read_u32(chg->dev->of_node, prop->name, &val); | 
 | 	if (rc == 0) { | 
 | 		rc = smbb_charger_attr_write(chg, which, val); | 
 | 		if (!rc || !prop->fail_ok) | 
 | 			return rc; | 
 | 	} | 
 | 	return smbb_charger_attr_read(chg, which); | 
 | } | 
 |  | 
 | static void smbb_set_line_flag(struct smbb_charger *chg, int irq, int flag) | 
 | { | 
 | 	bool state; | 
 | 	int ret; | 
 |  | 
 | 	ret = irq_get_irqchip_state(irq, IRQCHIP_STATE_LINE_LEVEL, &state); | 
 | 	if (ret < 0) { | 
 | 		dev_err(chg->dev, "failed to read irq line\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&chg->statlock); | 
 | 	if (state) | 
 | 		chg->status |= flag; | 
 | 	else | 
 | 		chg->status &= ~flag; | 
 | 	mutex_unlock(&chg->statlock); | 
 |  | 
 | 	dev_dbg(chg->dev, "status = %03lx\n", chg->status); | 
 | } | 
 |  | 
 | static irqreturn_t smbb_usb_valid_handler(int irq, void *_data) | 
 | { | 
 | 	struct smbb_charger *chg = _data; | 
 |  | 
 | 	smbb_set_line_flag(chg, irq, STATUS_USBIN_VALID); | 
 | 	extcon_set_cable_state_(chg->edev, EXTCON_USB, | 
 | 				chg->status & STATUS_USBIN_VALID); | 
 | 	power_supply_changed(chg->usb_psy); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t smbb_dc_valid_handler(int irq, void *_data) | 
 | { | 
 | 	struct smbb_charger *chg = _data; | 
 |  | 
 | 	smbb_set_line_flag(chg, irq, STATUS_DCIN_VALID); | 
 | 	if (!chg->dc_disabled) | 
 | 		power_supply_changed(chg->dc_psy); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t smbb_bat_temp_handler(int irq, void *_data) | 
 | { | 
 | 	struct smbb_charger *chg = _data; | 
 | 	unsigned int val; | 
 | 	int rc; | 
 |  | 
 | 	rc = regmap_read(chg->regmap, chg->addr + SMBB_BAT_TEMP_STATUS, &val); | 
 | 	if (rc) | 
 | 		return IRQ_HANDLED; | 
 |  | 
 | 	mutex_lock(&chg->statlock); | 
 | 	if (val & TEMP_STATUS_OK) { | 
 | 		chg->status |= STATUS_BAT_OK; | 
 | 	} else { | 
 | 		chg->status &= ~STATUS_BAT_OK; | 
 | 		if (val & TEMP_STATUS_HOT) | 
 | 			chg->status |= STATUS_BAT_HOT; | 
 | 	} | 
 | 	mutex_unlock(&chg->statlock); | 
 |  | 
 | 	power_supply_changed(chg->bat_psy); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t smbb_bat_present_handler(int irq, void *_data) | 
 | { | 
 | 	struct smbb_charger *chg = _data; | 
 |  | 
 | 	smbb_set_line_flag(chg, irq, STATUS_BAT_PRESENT); | 
 | 	power_supply_changed(chg->bat_psy); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t smbb_chg_done_handler(int irq, void *_data) | 
 | { | 
 | 	struct smbb_charger *chg = _data; | 
 |  | 
 | 	smbb_set_line_flag(chg, irq, STATUS_CHG_DONE); | 
 | 	power_supply_changed(chg->bat_psy); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t smbb_chg_gone_handler(int irq, void *_data) | 
 | { | 
 | 	struct smbb_charger *chg = _data; | 
 |  | 
 | 	smbb_set_line_flag(chg, irq, STATUS_CHG_GONE); | 
 | 	power_supply_changed(chg->bat_psy); | 
 | 	power_supply_changed(chg->usb_psy); | 
 | 	if (!chg->dc_disabled) | 
 | 		power_supply_changed(chg->dc_psy); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t smbb_chg_fast_handler(int irq, void *_data) | 
 | { | 
 | 	struct smbb_charger *chg = _data; | 
 |  | 
 | 	smbb_set_line_flag(chg, irq, STATUS_CHG_FAST); | 
 | 	power_supply_changed(chg->bat_psy); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t smbb_chg_trkl_handler(int irq, void *_data) | 
 | { | 
 | 	struct smbb_charger *chg = _data; | 
 |  | 
 | 	smbb_set_line_flag(chg, irq, STATUS_CHG_TRKL); | 
 | 	power_supply_changed(chg->bat_psy); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static const struct smbb_irq { | 
 | 	const char *name; | 
 | 	irqreturn_t (*handler)(int, void *); | 
 | } smbb_charger_irqs[] = { | 
 | 	{ "chg-done", smbb_chg_done_handler }, | 
 | 	{ "chg-fast", smbb_chg_fast_handler }, | 
 | 	{ "chg-trkl", smbb_chg_trkl_handler }, | 
 | 	{ "bat-temp-ok", smbb_bat_temp_handler }, | 
 | 	{ "bat-present", smbb_bat_present_handler }, | 
 | 	{ "chg-gone", smbb_chg_gone_handler }, | 
 | 	{ "usb-valid", smbb_usb_valid_handler }, | 
 | 	{ "dc-valid", smbb_dc_valid_handler }, | 
 | }; | 
 |  | 
 | static int smbb_usbin_get_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp, | 
 | 		union power_supply_propval *val) | 
 | { | 
 | 	struct smbb_charger *chg = power_supply_get_drvdata(psy); | 
 | 	int rc = 0; | 
 |  | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_ONLINE: | 
 | 		mutex_lock(&chg->statlock); | 
 | 		val->intval = !(chg->status & STATUS_CHG_GONE) && | 
 | 				(chg->status & STATUS_USBIN_VALID); | 
 | 		mutex_unlock(&chg->statlock); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: | 
 | 		val->intval = chg->attr[ATTR_USBIN_IMAX]; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: | 
 | 		val->intval = 2500000; | 
 | 		break; | 
 | 	default: | 
 | 		rc = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int smbb_usbin_set_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp, | 
 | 		const union power_supply_propval *val) | 
 | { | 
 | 	struct smbb_charger *chg = power_supply_get_drvdata(psy); | 
 | 	int rc; | 
 |  | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: | 
 | 		rc = smbb_charger_attr_write(chg, ATTR_USBIN_IMAX, | 
 | 				val->intval); | 
 | 		break; | 
 | 	default: | 
 | 		rc = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int smbb_dcin_get_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp, | 
 | 		union power_supply_propval *val) | 
 | { | 
 | 	struct smbb_charger *chg = power_supply_get_drvdata(psy); | 
 | 	int rc = 0; | 
 |  | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_ONLINE: | 
 | 		mutex_lock(&chg->statlock); | 
 | 		val->intval = !(chg->status & STATUS_CHG_GONE) && | 
 | 				(chg->status & STATUS_DCIN_VALID); | 
 | 		mutex_unlock(&chg->statlock); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: | 
 | 		val->intval = chg->attr[ATTR_DCIN_IMAX]; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: | 
 | 		val->intval = 2500000; | 
 | 		break; | 
 | 	default: | 
 | 		rc = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int smbb_dcin_set_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp, | 
 | 		const union power_supply_propval *val) | 
 | { | 
 | 	struct smbb_charger *chg = power_supply_get_drvdata(psy); | 
 | 	int rc; | 
 |  | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: | 
 | 		rc = smbb_charger_attr_write(chg, ATTR_DCIN_IMAX, | 
 | 				val->intval); | 
 | 		break; | 
 | 	default: | 
 | 		rc = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int smbb_charger_writable_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp) | 
 | { | 
 | 	return psp == POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT; | 
 | } | 
 |  | 
 | static int smbb_battery_get_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp, | 
 | 		union power_supply_propval *val) | 
 | { | 
 | 	struct smbb_charger *chg = power_supply_get_drvdata(psy); | 
 | 	unsigned long status; | 
 | 	int rc = 0; | 
 |  | 
 | 	mutex_lock(&chg->statlock); | 
 | 	status = chg->status; | 
 | 	mutex_unlock(&chg->statlock); | 
 |  | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_STATUS: | 
 | 		if (status & STATUS_CHG_GONE) | 
 | 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING; | 
 | 		else if (!(status & (STATUS_DCIN_VALID | STATUS_USBIN_VALID))) | 
 | 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING; | 
 | 		else if (status & STATUS_CHG_DONE) | 
 | 			val->intval = POWER_SUPPLY_STATUS_FULL; | 
 | 		else if (!(status & STATUS_BAT_OK)) | 
 | 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING; | 
 | 		else if (status & (STATUS_CHG_FAST | STATUS_CHG_TRKL)) | 
 | 			val->intval = POWER_SUPPLY_STATUS_CHARGING; | 
 | 		else /* everything is ok for charging, but we are not... */ | 
 | 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_HEALTH: | 
 | 		if (status & STATUS_BAT_OK) | 
 | 			val->intval = POWER_SUPPLY_HEALTH_GOOD; | 
 | 		else if (status & STATUS_BAT_HOT) | 
 | 			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; | 
 | 		else | 
 | 			val->intval = POWER_SUPPLY_HEALTH_COLD; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_TYPE: | 
 | 		if (status & STATUS_CHG_FAST) | 
 | 			val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; | 
 | 		else if (status & STATUS_CHG_TRKL) | 
 | 			val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; | 
 | 		else | 
 | 			val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_PRESENT: | 
 | 		val->intval = !!(status & STATUS_BAT_PRESENT); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CURRENT_MAX: | 
 | 		val->intval = chg->attr[ATTR_BAT_IMAX]; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_VOLTAGE_MAX: | 
 | 		val->intval = chg->attr[ATTR_BAT_VMAX]; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_TECHNOLOGY: | 
 | 		/* this charger is a single-cell lithium-ion battery charger | 
 | 		* only.  If you hook up some other technology, there will be | 
 | 		* fireworks. | 
 | 		*/ | 
 | 		val->intval = POWER_SUPPLY_TECHNOLOGY_LION; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: | 
 | 		val->intval = 3000000; /* single-cell li-ion low end */ | 
 | 		break; | 
 | 	default: | 
 | 		rc = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int smbb_battery_set_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp, | 
 | 		const union power_supply_propval *val) | 
 | { | 
 | 	struct smbb_charger *chg = power_supply_get_drvdata(psy); | 
 | 	int rc; | 
 |  | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_CURRENT_MAX: | 
 | 		rc = smbb_charger_attr_write(chg, ATTR_BAT_IMAX, val->intval); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_VOLTAGE_MAX: | 
 | 		rc = smbb_charger_attr_write(chg, ATTR_BAT_VMAX, val->intval); | 
 | 		break; | 
 | 	default: | 
 | 		rc = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int smbb_battery_writable_property(struct power_supply *psy, | 
 | 		enum power_supply_property psp) | 
 | { | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_CURRENT_MAX: | 
 | 	case POWER_SUPPLY_PROP_VOLTAGE_MAX: | 
 | 		return 1; | 
 | 	default: | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | static enum power_supply_property smbb_charger_properties[] = { | 
 | 	POWER_SUPPLY_PROP_ONLINE, | 
 | 	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, | 
 | 	POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, | 
 | }; | 
 |  | 
 | static enum power_supply_property smbb_battery_properties[] = { | 
 | 	POWER_SUPPLY_PROP_STATUS, | 
 | 	POWER_SUPPLY_PROP_HEALTH, | 
 | 	POWER_SUPPLY_PROP_PRESENT, | 
 | 	POWER_SUPPLY_PROP_CHARGE_TYPE, | 
 | 	POWER_SUPPLY_PROP_CURRENT_MAX, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_MAX, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
 | 	POWER_SUPPLY_PROP_TECHNOLOGY, | 
 | }; | 
 |  | 
 | static const struct reg_off_mask_default { | 
 | 	unsigned int offset; | 
 | 	unsigned int mask; | 
 | 	unsigned int value; | 
 | 	unsigned int rev_mask; | 
 | } smbb_charger_setup[] = { | 
 | 	/* The bootloader is supposed to set this... make sure anyway. */ | 
 | 	{ SMBB_MISC_BOOT_DONE, BOOT_DONE, BOOT_DONE }, | 
 |  | 
 | 	/* Disable software timer */ | 
 | 	{ SMBB_CHG_TCHG_MAX_EN, TCHG_MAX_EN, 0 }, | 
 |  | 
 | 	/* Clear and disable watchdog */ | 
 | 	{ SMBB_CHG_WDOG_TIME, 0xff, 160 }, | 
 | 	{ SMBB_CHG_WDOG_EN, WDOG_EN, 0 }, | 
 |  | 
 | 	/* Use charger based EoC detection */ | 
 | 	{ SMBB_CHG_IBAT_TERM_CHG, IBAT_TERM_CHG_IEOC, IBAT_TERM_CHG_IEOC_CHG }, | 
 |  | 
 | 	/* Disable GSM PA load adjustment. | 
 | 	* The PA signal is incorrectly connected on v2. | 
 | 	*/ | 
 | 	{ SMBB_CHG_CFG, 0xff, 0x00, BIT(3) }, | 
 |  | 
 | 	/* Use VBAT (not VSYS) to compensate for IR drop during fast charging */ | 
 | 	{ SMBB_BUCK_REG_MODE, BUCK_REG_MODE, BUCK_REG_MODE_VBAT }, | 
 |  | 
 | 	/* Enable battery temperature comparators */ | 
 | 	{ SMBB_BAT_BTC_CTRL, BTC_CTRL_COMP_EN, BTC_CTRL_COMP_EN }, | 
 |  | 
 | 	/* Stop USB enumeration timer */ | 
 | 	{ SMBB_USB_ENUM_TIMER_STOP, ENUM_TIMER_STOP, ENUM_TIMER_STOP }, | 
 |  | 
 | #if 0 /* FIXME supposedly only to disable hardware ARB termination */ | 
 | 	{ SMBB_USB_SEC_ACCESS, SEC_ACCESS_MAGIC }, | 
 | 	{ SMBB_USB_REV_BST, 0xff, REV_BST_CHG_GONE }, | 
 | #endif | 
 |  | 
 | 	/* Stop USB enumeration timer, again */ | 
 | 	{ SMBB_USB_ENUM_TIMER_STOP, ENUM_TIMER_STOP, ENUM_TIMER_STOP }, | 
 |  | 
 | 	/* Enable charging */ | 
 | 	{ SMBB_CHG_CTRL, CTRL_EN, CTRL_EN }, | 
 | }; | 
 |  | 
 | static char *smbb_bif[] = { "smbb-bif" }; | 
 |  | 
 | static const struct power_supply_desc bat_psy_desc = { | 
 | 	.name = "smbb-bif", | 
 | 	.type = POWER_SUPPLY_TYPE_BATTERY, | 
 | 	.properties = smbb_battery_properties, | 
 | 	.num_properties = ARRAY_SIZE(smbb_battery_properties), | 
 | 	.get_property = smbb_battery_get_property, | 
 | 	.set_property = smbb_battery_set_property, | 
 | 	.property_is_writeable = smbb_battery_writable_property, | 
 | }; | 
 |  | 
 | static const struct power_supply_desc usb_psy_desc = { | 
 | 	.name = "smbb-usbin", | 
 | 	.type = POWER_SUPPLY_TYPE_USB, | 
 | 	.properties = smbb_charger_properties, | 
 | 	.num_properties = ARRAY_SIZE(smbb_charger_properties), | 
 | 	.get_property = smbb_usbin_get_property, | 
 | 	.set_property = smbb_usbin_set_property, | 
 | 	.property_is_writeable = smbb_charger_writable_property, | 
 | }; | 
 |  | 
 | static const struct power_supply_desc dc_psy_desc = { | 
 | 	.name = "smbb-dcin", | 
 | 	.type = POWER_SUPPLY_TYPE_MAINS, | 
 | 	.properties = smbb_charger_properties, | 
 | 	.num_properties = ARRAY_SIZE(smbb_charger_properties), | 
 | 	.get_property = smbb_dcin_get_property, | 
 | 	.set_property = smbb_dcin_set_property, | 
 | 	.property_is_writeable = smbb_charger_writable_property, | 
 | }; | 
 |  | 
 | static int smbb_charger_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct power_supply_config bat_cfg = {}; | 
 | 	struct power_supply_config usb_cfg = {}; | 
 | 	struct power_supply_config dc_cfg = {}; | 
 | 	struct smbb_charger *chg; | 
 | 	int rc, i; | 
 |  | 
 | 	chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL); | 
 | 	if (!chg) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	chg->dev = &pdev->dev; | 
 | 	mutex_init(&chg->statlock); | 
 |  | 
 | 	chg->regmap = dev_get_regmap(pdev->dev.parent, NULL); | 
 | 	if (!chg->regmap) { | 
 | 		dev_err(&pdev->dev, "failed to locate regmap\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	rc = of_property_read_u32(pdev->dev.of_node, "reg", &chg->addr); | 
 | 	if (rc) { | 
 | 		dev_err(&pdev->dev, "missing or invalid 'reg' property\n"); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	rc = regmap_read(chg->regmap, chg->addr + SMBB_MISC_REV2, &chg->revision); | 
 | 	if (rc) { | 
 | 		dev_err(&pdev->dev, "unable to read revision\n"); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	chg->revision += 1; | 
 | 	if (chg->revision != 2 && chg->revision != 3) { | 
 | 		dev_err(&pdev->dev, "v1 hardware not supported\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	dev_info(&pdev->dev, "Initializing SMBB rev %u", chg->revision); | 
 |  | 
 | 	chg->dc_disabled = of_property_read_bool(pdev->dev.of_node, "qcom,disable-dc"); | 
 |  | 
 | 	for (i = 0; i < _ATTR_CNT; ++i) { | 
 | 		rc = smbb_charger_attr_parse(chg, i); | 
 | 		if (rc) { | 
 | 			dev_err(&pdev->dev, "failed to parse/apply settings\n"); | 
 | 			return rc; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	bat_cfg.drv_data = chg; | 
 | 	bat_cfg.of_node = pdev->dev.of_node; | 
 | 	chg->bat_psy = devm_power_supply_register(&pdev->dev, | 
 | 						  &bat_psy_desc, | 
 | 						  &bat_cfg); | 
 | 	if (IS_ERR(chg->bat_psy)) { | 
 | 		dev_err(&pdev->dev, "failed to register battery\n"); | 
 | 		return PTR_ERR(chg->bat_psy); | 
 | 	} | 
 |  | 
 | 	usb_cfg.drv_data = chg; | 
 | 	usb_cfg.supplied_to = smbb_bif; | 
 | 	usb_cfg.num_supplicants = ARRAY_SIZE(smbb_bif); | 
 | 	chg->usb_psy = devm_power_supply_register(&pdev->dev, | 
 | 						  &usb_psy_desc, | 
 | 						  &usb_cfg); | 
 | 	if (IS_ERR(chg->usb_psy)) { | 
 | 		dev_err(&pdev->dev, "failed to register USB power supply\n"); | 
 | 		return PTR_ERR(chg->usb_psy); | 
 | 	} | 
 |  | 
 | 	chg->edev = devm_extcon_dev_allocate(&pdev->dev, smbb_usb_extcon_cable); | 
 | 	if (IS_ERR(chg->edev)) { | 
 | 		dev_err(&pdev->dev, "failed to allocate extcon device\n"); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	rc = devm_extcon_dev_register(&pdev->dev, chg->edev); | 
 | 	if (rc < 0) { | 
 | 		dev_err(&pdev->dev, "failed to register extcon device\n"); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	if (!chg->dc_disabled) { | 
 | 		dc_cfg.drv_data = chg; | 
 | 		dc_cfg.supplied_to = smbb_bif; | 
 | 		dc_cfg.num_supplicants = ARRAY_SIZE(smbb_bif); | 
 | 		chg->dc_psy = devm_power_supply_register(&pdev->dev, | 
 | 							 &dc_psy_desc, | 
 | 							 &dc_cfg); | 
 | 		if (IS_ERR(chg->dc_psy)) { | 
 | 			dev_err(&pdev->dev, "failed to register DC power supply\n"); | 
 | 			return PTR_ERR(chg->dc_psy); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(smbb_charger_irqs); ++i) { | 
 | 		int irq; | 
 |  | 
 | 		irq = platform_get_irq_byname(pdev, smbb_charger_irqs[i].name); | 
 | 		if (irq < 0) { | 
 | 			dev_err(&pdev->dev, "failed to get irq '%s'\n", | 
 | 				smbb_charger_irqs[i].name); | 
 | 			return irq; | 
 | 		} | 
 |  | 
 | 		smbb_charger_irqs[i].handler(irq, chg); | 
 |  | 
 | 		rc = devm_request_threaded_irq(&pdev->dev, irq, NULL, | 
 | 				smbb_charger_irqs[i].handler, IRQF_ONESHOT, | 
 | 				smbb_charger_irqs[i].name, chg); | 
 | 		if (rc) { | 
 | 			dev_err(&pdev->dev, "failed to request irq '%s'\n", | 
 | 				smbb_charger_irqs[i].name); | 
 | 			return rc; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	chg->jeita_ext_temp = of_property_read_bool(pdev->dev.of_node, | 
 | 			"qcom,jeita-extended-temp-range"); | 
 |  | 
 | 	/* Set temperature range to [35%:70%] or [25%:80%] accordingly */ | 
 | 	rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_BAT_BTC_CTRL, | 
 | 			BTC_CTRL_COLD_EXT | BTC_CTRL_HOT_EXT_N, | 
 | 			chg->jeita_ext_temp ? | 
 | 				BTC_CTRL_COLD_EXT : | 
 | 				BTC_CTRL_HOT_EXT_N); | 
 | 	if (rc) { | 
 | 		dev_err(&pdev->dev, | 
 | 			"unable to set %s temperature range\n", | 
 | 			chg->jeita_ext_temp ? "JEITA extended" : "normal"); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(smbb_charger_setup); ++i) { | 
 | 		const struct reg_off_mask_default *r = &smbb_charger_setup[i]; | 
 |  | 
 | 		if (r->rev_mask & BIT(chg->revision)) | 
 | 			continue; | 
 |  | 
 | 		rc = regmap_update_bits(chg->regmap, chg->addr + r->offset, | 
 | 				r->mask, r->value); | 
 | 		if (rc) { | 
 | 			dev_err(&pdev->dev, | 
 | 				"unable to initializing charging, bailing\n"); | 
 | 			return rc; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, chg); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int smbb_charger_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct smbb_charger *chg; | 
 |  | 
 | 	chg = platform_get_drvdata(pdev); | 
 |  | 
 | 	regmap_update_bits(chg->regmap, chg->addr + SMBB_CHG_CTRL, CTRL_EN, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id smbb_charger_id_table[] = { | 
 | 	{ .compatible = "qcom,pm8941-charger" }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, smbb_charger_id_table); | 
 |  | 
 | static struct platform_driver smbb_charger_driver = { | 
 | 	.probe	  = smbb_charger_probe, | 
 | 	.remove	 = smbb_charger_remove, | 
 | 	.driver	 = { | 
 | 		.name   = "qcom-smbb", | 
 | 		.of_match_table = smbb_charger_id_table, | 
 | 	}, | 
 | }; | 
 | module_platform_driver(smbb_charger_driver); | 
 |  | 
 | MODULE_DESCRIPTION("Qualcomm Switch-Mode Battery Charger and Boost driver"); | 
 | MODULE_LICENSE("GPL v2"); |