|  | /* | 
|  | * IBM OPAL RTC driver | 
|  | * Copyright (C) 2014 IBM | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #define DRVNAME		"rtc-opal" | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/rtc.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/bcd.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/of.h> | 
|  | #include <asm/opal.h> | 
|  | #include <asm/firmware.h> | 
|  |  | 
|  | static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm) | 
|  | { | 
|  | tm->tm_year = ((bcd2bin(y_m_d >> 24) * 100) + | 
|  | bcd2bin((y_m_d >> 16) & 0xff)) - 1900; | 
|  | tm->tm_mon  = bcd2bin((y_m_d >> 8) & 0xff) - 1; | 
|  | tm->tm_mday = bcd2bin(y_m_d & 0xff); | 
|  | tm->tm_hour = bcd2bin((h_m_s_ms >> 56) & 0xff); | 
|  | tm->tm_min  = bcd2bin((h_m_s_ms >> 48) & 0xff); | 
|  | tm->tm_sec  = bcd2bin((h_m_s_ms >> 40) & 0xff); | 
|  |  | 
|  | tm->tm_wday = -1; | 
|  | } | 
|  |  | 
|  | static void tm_to_opal(struct rtc_time *tm, u32 *y_m_d, u64 *h_m_s_ms) | 
|  | { | 
|  | *y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) / 100)) << 24; | 
|  | *y_m_d |= ((u32)bin2bcd((tm->tm_year + 1900) % 100)) << 16; | 
|  | *y_m_d |= ((u32)bin2bcd((tm->tm_mon + 1))) << 8; | 
|  | *y_m_d |= ((u32)bin2bcd(tm->tm_mday)); | 
|  |  | 
|  | *h_m_s_ms |= ((u64)bin2bcd(tm->tm_hour)) << 56; | 
|  | *h_m_s_ms |= ((u64)bin2bcd(tm->tm_min)) << 48; | 
|  | *h_m_s_ms |= ((u64)bin2bcd(tm->tm_sec)) << 40; | 
|  | } | 
|  |  | 
|  | static int opal_get_rtc_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | s64 rc = OPAL_BUSY; | 
|  | int retries = 10; | 
|  | u32 y_m_d; | 
|  | u64 h_m_s_ms; | 
|  | __be32 __y_m_d; | 
|  | __be64 __h_m_s_ms; | 
|  |  | 
|  | while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { | 
|  | rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms); | 
|  | if (rc == OPAL_BUSY_EVENT) { | 
|  | msleep(OPAL_BUSY_DELAY_MS); | 
|  | opal_poll_events(NULL); | 
|  | } else if (rc == OPAL_BUSY) { | 
|  | msleep(OPAL_BUSY_DELAY_MS); | 
|  | } else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) { | 
|  | if (retries--) { | 
|  | msleep(10); /* Wait 10ms before retry */ | 
|  | rc = OPAL_BUSY; /* go around again */ | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rc != OPAL_SUCCESS) | 
|  | return -EIO; | 
|  |  | 
|  | y_m_d = be32_to_cpu(__y_m_d); | 
|  | h_m_s_ms = be64_to_cpu(__h_m_s_ms); | 
|  | opal_to_tm(y_m_d, h_m_s_ms, tm); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int opal_set_rtc_time(struct device *dev, struct rtc_time *tm) | 
|  | { | 
|  | s64 rc = OPAL_BUSY; | 
|  | int retries = 10; | 
|  | u32 y_m_d = 0; | 
|  | u64 h_m_s_ms = 0; | 
|  |  | 
|  | tm_to_opal(tm, &y_m_d, &h_m_s_ms); | 
|  |  | 
|  | while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) { | 
|  | rc = opal_rtc_write(y_m_d, h_m_s_ms); | 
|  | if (rc == OPAL_BUSY_EVENT) { | 
|  | msleep(OPAL_BUSY_DELAY_MS); | 
|  | opal_poll_events(NULL); | 
|  | } else if (rc == OPAL_BUSY) { | 
|  | msleep(OPAL_BUSY_DELAY_MS); | 
|  | } else if (rc == OPAL_HARDWARE || rc == OPAL_INTERNAL_ERROR) { | 
|  | if (retries--) { | 
|  | msleep(10); /* Wait 10ms before retry */ | 
|  | rc = OPAL_BUSY; /* go around again */ | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return rc == OPAL_SUCCESS ? 0 : -EIO; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * TPO	Timed Power-On | 
|  | * | 
|  | * TPO get/set OPAL calls care about the hour and min and to make it consistent | 
|  | * with the rtc utility time conversion functions, we use the 'u64' to store | 
|  | * its value and perform bit shift by 32 before use.. | 
|  | */ | 
|  | static int opal_get_tpo_time(struct device *dev, struct rtc_wkalrm *alarm) | 
|  | { | 
|  | __be32 __y_m_d, __h_m; | 
|  | struct opal_msg msg; | 
|  | int rc, token; | 
|  | u64 h_m_s_ms; | 
|  | u32 y_m_d; | 
|  |  | 
|  | token = opal_async_get_token_interruptible(); | 
|  | if (token < 0) { | 
|  | if (token != -ERESTARTSYS) | 
|  | pr_err("Failed to get the async token\n"); | 
|  |  | 
|  | return token; | 
|  | } | 
|  |  | 
|  | rc = opal_tpo_read(token, &__y_m_d, &__h_m); | 
|  | if (rc != OPAL_ASYNC_COMPLETION) { | 
|  | rc = -EIO; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | rc = opal_async_wait_response(token, &msg); | 
|  | if (rc) { | 
|  | rc = -EIO; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | rc = opal_get_async_rc(msg); | 
|  | if (rc != OPAL_SUCCESS) { | 
|  | rc = -EIO; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | y_m_d = be32_to_cpu(__y_m_d); | 
|  | h_m_s_ms = ((u64)be32_to_cpu(__h_m) << 32); | 
|  |  | 
|  | /* check if no alarm is set */ | 
|  | if (y_m_d == 0 && h_m_s_ms == 0) { | 
|  | pr_debug("No alarm is set\n"); | 
|  | rc = -ENOENT; | 
|  | goto exit; | 
|  | } else { | 
|  | pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms); | 
|  | } | 
|  |  | 
|  | opal_to_tm(y_m_d, h_m_s_ms, &alarm->time); | 
|  |  | 
|  | exit: | 
|  | opal_async_release_token(token); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Set Timed Power-On */ | 
|  | static int opal_set_tpo_time(struct device *dev, struct rtc_wkalrm *alarm) | 
|  | { | 
|  | u64 h_m_s_ms = 0; | 
|  | struct opal_msg msg; | 
|  | u32 y_m_d = 0; | 
|  | int token, rc; | 
|  |  | 
|  | /* if alarm is enabled */ | 
|  | if (alarm->enabled) { | 
|  | tm_to_opal(&alarm->time, &y_m_d, &h_m_s_ms); | 
|  | pr_debug("Alarm set to %x %llx\n", y_m_d, h_m_s_ms); | 
|  |  | 
|  | } else { | 
|  | pr_debug("Alarm getting disabled\n"); | 
|  | } | 
|  |  | 
|  | token = opal_async_get_token_interruptible(); | 
|  | if (token < 0) { | 
|  | if (token != -ERESTARTSYS) | 
|  | pr_err("Failed to get the async token\n"); | 
|  |  | 
|  | return token; | 
|  | } | 
|  |  | 
|  | /* TPO, we care about hour and minute */ | 
|  | rc = opal_tpo_write(token, y_m_d, | 
|  | (u32)((h_m_s_ms >> 32) & 0xffff0000)); | 
|  | if (rc != OPAL_ASYNC_COMPLETION) { | 
|  | rc = -EIO; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | rc = opal_async_wait_response(token, &msg); | 
|  | if (rc) { | 
|  | rc = -EIO; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | rc = opal_get_async_rc(msg); | 
|  | if (rc != OPAL_SUCCESS) | 
|  | rc = -EIO; | 
|  |  | 
|  | exit: | 
|  | opal_async_release_token(token); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | int opal_tpo_alarm_irq_enable(struct device *dev, unsigned int enabled) | 
|  | { | 
|  | struct rtc_wkalrm alarm = { .enabled = 0 }; | 
|  |  | 
|  | /* | 
|  | * TPO is automatically enabled when opal_set_tpo_time() is called with | 
|  | * non-zero rtc-time. We only handle disable case which needs to be | 
|  | * explicitly told to opal. | 
|  | */ | 
|  | return enabled ? 0 : opal_set_tpo_time(dev, &alarm); | 
|  | } | 
|  |  | 
|  | static struct rtc_class_ops opal_rtc_ops = { | 
|  | .read_time	= opal_get_rtc_time, | 
|  | .set_time	= opal_set_rtc_time, | 
|  | }; | 
|  |  | 
|  | static int opal_rtc_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct rtc_device *rtc; | 
|  |  | 
|  | if (pdev->dev.of_node && | 
|  | (of_property_read_bool(pdev->dev.of_node, "wakeup-source") || | 
|  | of_property_read_bool(pdev->dev.of_node, "has-tpo")/* legacy */)) { | 
|  | device_set_wakeup_capable(&pdev->dev, true); | 
|  | opal_rtc_ops.read_alarm	= opal_get_tpo_time; | 
|  | opal_rtc_ops.set_alarm = opal_set_tpo_time; | 
|  | opal_rtc_ops.alarm_irq_enable = opal_tpo_alarm_irq_enable; | 
|  | } | 
|  |  | 
|  | rtc = devm_rtc_device_register(&pdev->dev, DRVNAME, &opal_rtc_ops, | 
|  | THIS_MODULE); | 
|  | if (IS_ERR(rtc)) | 
|  | return PTR_ERR(rtc); | 
|  |  | 
|  | rtc->uie_unsupported = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id opal_rtc_match[] = { | 
|  | { | 
|  | .compatible	= "ibm,opal-rtc", | 
|  | }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, opal_rtc_match); | 
|  |  | 
|  | static const struct platform_device_id opal_rtc_driver_ids[] = { | 
|  | { | 
|  | .name		= "opal-rtc", | 
|  | }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(platform, opal_rtc_driver_ids); | 
|  |  | 
|  | static struct platform_driver opal_rtc_driver = { | 
|  | .probe		= opal_rtc_probe, | 
|  | .id_table	= opal_rtc_driver_ids, | 
|  | .driver		= { | 
|  | .name		= DRVNAME, | 
|  | .of_match_table	= opal_rtc_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init opal_rtc_init(void) | 
|  | { | 
|  | if (!firmware_has_feature(FW_FEATURE_OPAL)) | 
|  | return -ENODEV; | 
|  |  | 
|  | return platform_driver_register(&opal_rtc_driver); | 
|  | } | 
|  |  | 
|  | static void __exit opal_rtc_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&opal_rtc_driver); | 
|  | } | 
|  |  | 
|  | MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>"); | 
|  | MODULE_DESCRIPTION("IBM OPAL RTC driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | module_init(opal_rtc_init); | 
|  | module_exit(opal_rtc_exit); |