|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/blkpg.h> | 
|  | #include <linux/cdrom.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/slab.h> | 
|  | #include <asm/io.h> | 
|  | #include <linux/uaccess.h> | 
|  |  | 
|  | #include <scsi/scsi.h> | 
|  | #include <scsi/scsi_dbg.h> | 
|  | #include <scsi/scsi_device.h> | 
|  | #include <scsi/scsi_eh.h> | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <scsi/scsi_ioctl.h> | 
|  | #include <scsi/scsi_cmnd.h> | 
|  |  | 
|  | #include "sr.h" | 
|  |  | 
|  | #if 0 | 
|  | #define DEBUG | 
|  | #endif | 
|  |  | 
|  | /* The sr_is_xa() seems to trigger firmware bugs with some drives :-( | 
|  | * It is off by default and can be turned on with this module parameter */ | 
|  | static int xa_test = 0; | 
|  |  | 
|  | module_param(xa_test, int, S_IRUGO | S_IWUSR); | 
|  |  | 
|  | static int sr_read_tochdr(struct cdrom_device_info *cdi, | 
|  | struct cdrom_tochdr *tochdr) | 
|  | { | 
|  | struct scsi_cd *cd = cdi->handle; | 
|  | struct packet_command cgc; | 
|  | int result; | 
|  | unsigned char *buffer; | 
|  |  | 
|  | buffer = kmalloc(32, GFP_KERNEL); | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memset(&cgc, 0, sizeof(struct packet_command)); | 
|  | cgc.timeout = IOCTL_TIMEOUT; | 
|  | cgc.cmd[0] = GPCMD_READ_TOC_PMA_ATIP; | 
|  | cgc.cmd[8] = 12;		/* LSB of length */ | 
|  | cgc.buffer = buffer; | 
|  | cgc.buflen = 12; | 
|  | cgc.quiet = 1; | 
|  | cgc.data_direction = DMA_FROM_DEVICE; | 
|  |  | 
|  | result = sr_do_ioctl(cd, &cgc); | 
|  |  | 
|  | tochdr->cdth_trk0 = buffer[2]; | 
|  | tochdr->cdth_trk1 = buffer[3]; | 
|  |  | 
|  | kfree(buffer); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static int sr_read_tocentry(struct cdrom_device_info *cdi, | 
|  | struct cdrom_tocentry *tocentry) | 
|  | { | 
|  | struct scsi_cd *cd = cdi->handle; | 
|  | struct packet_command cgc; | 
|  | int result; | 
|  | unsigned char *buffer; | 
|  |  | 
|  | buffer = kmalloc(32, GFP_KERNEL); | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memset(&cgc, 0, sizeof(struct packet_command)); | 
|  | cgc.timeout = IOCTL_TIMEOUT; | 
|  | cgc.cmd[0] = GPCMD_READ_TOC_PMA_ATIP; | 
|  | cgc.cmd[1] |= (tocentry->cdte_format == CDROM_MSF) ? 0x02 : 0; | 
|  | cgc.cmd[6] = tocentry->cdte_track; | 
|  | cgc.cmd[8] = 12;		/* LSB of length */ | 
|  | cgc.buffer = buffer; | 
|  | cgc.buflen = 12; | 
|  | cgc.data_direction = DMA_FROM_DEVICE; | 
|  |  | 
|  | result = sr_do_ioctl(cd, &cgc); | 
|  |  | 
|  | tocentry->cdte_ctrl = buffer[5] & 0xf; | 
|  | tocentry->cdte_adr = buffer[5] >> 4; | 
|  | tocentry->cdte_datamode = (tocentry->cdte_ctrl & 0x04) ? 1 : 0; | 
|  | if (tocentry->cdte_format == CDROM_MSF) { | 
|  | tocentry->cdte_addr.msf.minute = buffer[9]; | 
|  | tocentry->cdte_addr.msf.second = buffer[10]; | 
|  | tocentry->cdte_addr.msf.frame = buffer[11]; | 
|  | } else | 
|  | tocentry->cdte_addr.lba = (((((buffer[8] << 8) + buffer[9]) << 8) | 
|  | + buffer[10]) << 8) + buffer[11]; | 
|  |  | 
|  | kfree(buffer); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | #define IOCTL_RETRIES 3 | 
|  |  | 
|  | /* ATAPI drives don't have a SCMD_PLAYAUDIO_TI command.  When these drives | 
|  | are emulating a SCSI device via the idescsi module, they need to have | 
|  | CDROMPLAYTRKIND commands translated into CDROMPLAYMSF commands for them */ | 
|  |  | 
|  | static int sr_fake_playtrkind(struct cdrom_device_info *cdi, struct cdrom_ti *ti) | 
|  | { | 
|  | struct cdrom_tocentry trk0_te, trk1_te; | 
|  | struct cdrom_tochdr tochdr; | 
|  | struct packet_command cgc; | 
|  | int ntracks, ret; | 
|  |  | 
|  | ret = sr_read_tochdr(cdi, &tochdr); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ntracks = tochdr.cdth_trk1 - tochdr.cdth_trk0 + 1; | 
|  |  | 
|  | if (ti->cdti_trk1 == ntracks) | 
|  | ti->cdti_trk1 = CDROM_LEADOUT; | 
|  | else if (ti->cdti_trk1 != CDROM_LEADOUT) | 
|  | ti->cdti_trk1 ++; | 
|  |  | 
|  | trk0_te.cdte_track = ti->cdti_trk0; | 
|  | trk0_te.cdte_format = CDROM_MSF; | 
|  | trk1_te.cdte_track = ti->cdti_trk1; | 
|  | trk1_te.cdte_format = CDROM_MSF; | 
|  |  | 
|  | ret = sr_read_tocentry(cdi, &trk0_te); | 
|  | if (ret) | 
|  | return ret; | 
|  | ret = sr_read_tocentry(cdi, &trk1_te); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | memset(&cgc, 0, sizeof(struct packet_command)); | 
|  | cgc.cmd[0] = GPCMD_PLAY_AUDIO_MSF; | 
|  | cgc.cmd[3] = trk0_te.cdte_addr.msf.minute; | 
|  | cgc.cmd[4] = trk0_te.cdte_addr.msf.second; | 
|  | cgc.cmd[5] = trk0_te.cdte_addr.msf.frame; | 
|  | cgc.cmd[6] = trk1_te.cdte_addr.msf.minute; | 
|  | cgc.cmd[7] = trk1_te.cdte_addr.msf.second; | 
|  | cgc.cmd[8] = trk1_te.cdte_addr.msf.frame; | 
|  | cgc.data_direction = DMA_NONE; | 
|  | cgc.timeout = IOCTL_TIMEOUT; | 
|  | return sr_do_ioctl(cdi->handle, &cgc); | 
|  | } | 
|  |  | 
|  | static int sr_play_trkind(struct cdrom_device_info *cdi, | 
|  | struct cdrom_ti *ti) | 
|  |  | 
|  | { | 
|  | struct scsi_cd *cd = cdi->handle; | 
|  | struct packet_command cgc; | 
|  | int result; | 
|  |  | 
|  | memset(&cgc, 0, sizeof(struct packet_command)); | 
|  | cgc.timeout = IOCTL_TIMEOUT; | 
|  | cgc.cmd[0] = GPCMD_PLAYAUDIO_TI; | 
|  | cgc.cmd[4] = ti->cdti_trk0; | 
|  | cgc.cmd[5] = ti->cdti_ind0; | 
|  | cgc.cmd[7] = ti->cdti_trk1; | 
|  | cgc.cmd[8] = ti->cdti_ind1; | 
|  | cgc.data_direction = DMA_NONE; | 
|  |  | 
|  | result = sr_do_ioctl(cd, &cgc); | 
|  | if (result == -EDRIVE_CANT_DO_THIS) | 
|  | result = sr_fake_playtrkind(cdi, ti); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* We do our own retries because we want to know what the specific | 
|  | error code is.  Normally the UNIT_ATTENTION code will automatically | 
|  | clear after one error */ | 
|  |  | 
|  | int sr_do_ioctl(Scsi_CD *cd, struct packet_command *cgc) | 
|  | { | 
|  | struct scsi_device *SDev; | 
|  | struct scsi_sense_hdr local_sshdr, *sshdr = &local_sshdr; | 
|  | int result, err = 0, retries = 0; | 
|  |  | 
|  | SDev = cd->device; | 
|  |  | 
|  | if (cgc->sshdr) | 
|  | sshdr = cgc->sshdr; | 
|  |  | 
|  | retry: | 
|  | if (!scsi_block_when_processing_errors(SDev)) { | 
|  | err = -ENODEV; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | result = scsi_execute(SDev, cgc->cmd, cgc->data_direction, | 
|  | cgc->buffer, cgc->buflen, NULL, sshdr, | 
|  | cgc->timeout, IOCTL_RETRIES, 0, 0, NULL); | 
|  |  | 
|  | /* Minimal error checking.  Ignore cases we know about, and report the rest. */ | 
|  | if (result < 0) { | 
|  | err = result; | 
|  | goto out; | 
|  | } | 
|  | if (scsi_status_is_check_condition(result)) { | 
|  | switch (sshdr->sense_key) { | 
|  | case UNIT_ATTENTION: | 
|  | SDev->changed = 1; | 
|  | if (!cgc->quiet) | 
|  | sr_printk(KERN_INFO, cd, | 
|  | "disc change detected.\n"); | 
|  | if (retries++ < 10) | 
|  | goto retry; | 
|  | err = -ENOMEDIUM; | 
|  | break; | 
|  | case NOT_READY:	/* This happens if there is no disc in drive */ | 
|  | if (sshdr->asc == 0x04 && | 
|  | sshdr->ascq == 0x01) { | 
|  | /* sense: Logical unit is in process of becoming ready */ | 
|  | if (!cgc->quiet) | 
|  | sr_printk(KERN_INFO, cd, | 
|  | "CDROM not ready yet.\n"); | 
|  | if (retries++ < 10) { | 
|  | /* sleep 2 sec and try again */ | 
|  | ssleep(2); | 
|  | goto retry; | 
|  | } else { | 
|  | /* 20 secs are enough? */ | 
|  | err = -ENOMEDIUM; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!cgc->quiet) | 
|  | sr_printk(KERN_INFO, cd, | 
|  | "CDROM not ready.  Make sure there " | 
|  | "is a disc in the drive.\n"); | 
|  | err = -ENOMEDIUM; | 
|  | break; | 
|  | case ILLEGAL_REQUEST: | 
|  | err = -EIO; | 
|  | if (sshdr->asc == 0x20 && | 
|  | sshdr->ascq == 0x00) | 
|  | /* sense: Invalid command operation code */ | 
|  | err = -EDRIVE_CANT_DO_THIS; | 
|  | break; | 
|  | default: | 
|  | err = -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Wake up a process waiting for device */ | 
|  | out: | 
|  | cgc->stat = err; | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* ---------------------------------------------------------------------- */ | 
|  | /* interface to cdrom.c                                                   */ | 
|  |  | 
|  | int sr_tray_move(struct cdrom_device_info *cdi, int pos) | 
|  | { | 
|  | Scsi_CD *cd = cdi->handle; | 
|  | struct packet_command cgc; | 
|  |  | 
|  | memset(&cgc, 0, sizeof(struct packet_command)); | 
|  | cgc.cmd[0] = GPCMD_START_STOP_UNIT; | 
|  | cgc.cmd[4] = (pos == 0) ? 0x03 /* close */ : 0x02 /* eject */ ; | 
|  | cgc.data_direction = DMA_NONE; | 
|  | cgc.timeout = IOCTL_TIMEOUT; | 
|  | return sr_do_ioctl(cd, &cgc); | 
|  | } | 
|  |  | 
|  | int sr_lock_door(struct cdrom_device_info *cdi, int lock) | 
|  | { | 
|  | Scsi_CD *cd = cdi->handle; | 
|  |  | 
|  | return scsi_set_medium_removal(cd->device, lock ? | 
|  | SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW); | 
|  | } | 
|  |  | 
|  | int sr_drive_status(struct cdrom_device_info *cdi, int slot) | 
|  | { | 
|  | struct scsi_cd *cd = cdi->handle; | 
|  | struct scsi_sense_hdr sshdr; | 
|  | struct media_event_desc med; | 
|  |  | 
|  | if (CDSL_CURRENT != slot) { | 
|  | /* we have no changer support */ | 
|  | return -EINVAL; | 
|  | } | 
|  | if (!scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr)) | 
|  | return CDS_DISC_OK; | 
|  |  | 
|  | /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */ | 
|  | if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY | 
|  | && sshdr.asc == 0x04 && sshdr.ascq == 0x01) | 
|  | return CDS_DRIVE_NOT_READY; | 
|  |  | 
|  | if (!cdrom_get_media_event(cdi, &med)) { | 
|  | if (med.media_present) | 
|  | return CDS_DISC_OK; | 
|  | else if (med.door_open) | 
|  | return CDS_TRAY_OPEN; | 
|  | else | 
|  | return CDS_NO_DISC; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * SK/ASC/ASCQ of 2/4/2 means "initialization required" | 
|  | * Using CD_TRAY_OPEN results in an START_STOP_UNIT to close | 
|  | * the tray, which resolves the initialization requirement. | 
|  | */ | 
|  | if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY | 
|  | && sshdr.asc == 0x04 && sshdr.ascq == 0x02) | 
|  | return CDS_TRAY_OPEN; | 
|  |  | 
|  | /* | 
|  | * 0x04 is format in progress .. but there must be a disc present! | 
|  | */ | 
|  | if (sshdr.sense_key == NOT_READY && sshdr.asc == 0x04) | 
|  | return CDS_DISC_OK; | 
|  |  | 
|  | /* | 
|  | * If not using Mt Fuji extended media tray reports, | 
|  | * just return TRAY_OPEN since ATAPI doesn't provide | 
|  | * any other way to detect this... | 
|  | */ | 
|  | if (scsi_sense_valid(&sshdr) && | 
|  | /* 0x3a is medium not present */ | 
|  | sshdr.asc == 0x3a) | 
|  | return CDS_NO_DISC; | 
|  | else | 
|  | return CDS_TRAY_OPEN; | 
|  |  | 
|  | return CDS_DRIVE_NOT_READY; | 
|  | } | 
|  |  | 
|  | int sr_disk_status(struct cdrom_device_info *cdi) | 
|  | { | 
|  | Scsi_CD *cd = cdi->handle; | 
|  | struct cdrom_tochdr toc_h; | 
|  | struct cdrom_tocentry toc_e; | 
|  | int i, rc, have_datatracks = 0; | 
|  |  | 
|  | /* look for data tracks */ | 
|  | rc = sr_read_tochdr(cdi, &toc_h); | 
|  | if (rc) | 
|  | return (rc == -ENOMEDIUM) ? CDS_NO_DISC : CDS_NO_INFO; | 
|  |  | 
|  | for (i = toc_h.cdth_trk0; i <= toc_h.cdth_trk1; i++) { | 
|  | toc_e.cdte_track = i; | 
|  | toc_e.cdte_format = CDROM_LBA; | 
|  | if (sr_read_tocentry(cdi, &toc_e)) | 
|  | return CDS_NO_INFO; | 
|  | if (toc_e.cdte_ctrl & CDROM_DATA_TRACK) { | 
|  | have_datatracks = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!have_datatracks) | 
|  | return CDS_AUDIO; | 
|  |  | 
|  | if (cd->xa_flag) | 
|  | return CDS_XA_2_1; | 
|  | else | 
|  | return CDS_DATA_1; | 
|  | } | 
|  |  | 
|  | int sr_get_last_session(struct cdrom_device_info *cdi, | 
|  | struct cdrom_multisession *ms_info) | 
|  | { | 
|  | Scsi_CD *cd = cdi->handle; | 
|  |  | 
|  | ms_info->addr.lba = cd->ms_offset; | 
|  | ms_info->xa_flag = cd->xa_flag || cd->ms_offset > 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int sr_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn) | 
|  | { | 
|  | Scsi_CD *cd = cdi->handle; | 
|  | struct packet_command cgc; | 
|  | char *buffer = kmalloc(32, GFP_KERNEL); | 
|  | int result; | 
|  |  | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | memset(&cgc, 0, sizeof(struct packet_command)); | 
|  | cgc.cmd[0] = GPCMD_READ_SUBCHANNEL; | 
|  | cgc.cmd[2] = 0x40;	/* I do want the subchannel info */ | 
|  | cgc.cmd[3] = 0x02;	/* Give me medium catalog number info */ | 
|  | cgc.cmd[8] = 24; | 
|  | cgc.buffer = buffer; | 
|  | cgc.buflen = 24; | 
|  | cgc.data_direction = DMA_FROM_DEVICE; | 
|  | cgc.timeout = IOCTL_TIMEOUT; | 
|  | result = sr_do_ioctl(cd, &cgc); | 
|  |  | 
|  | memcpy(mcn->medium_catalog_number, buffer + 9, 13); | 
|  | mcn->medium_catalog_number[13] = 0; | 
|  |  | 
|  | kfree(buffer); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | int sr_reset(struct cdrom_device_info *cdi) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int sr_select_speed(struct cdrom_device_info *cdi, int speed) | 
|  | { | 
|  | Scsi_CD *cd = cdi->handle; | 
|  | struct packet_command cgc; | 
|  |  | 
|  | if (speed == 0) | 
|  | speed = 0xffff;	/* set to max */ | 
|  | else | 
|  | speed *= 177;	/* Nx to kbyte/s */ | 
|  |  | 
|  | memset(&cgc, 0, sizeof(struct packet_command)); | 
|  | cgc.cmd[0] = GPCMD_SET_SPEED;	/* SET CD SPEED */ | 
|  | cgc.cmd[2] = (speed >> 8) & 0xff;	/* MSB for speed (in kbytes/sec) */ | 
|  | cgc.cmd[3] = speed & 0xff;	/* LSB */ | 
|  | cgc.data_direction = DMA_NONE; | 
|  | cgc.timeout = IOCTL_TIMEOUT; | 
|  |  | 
|  | if (sr_do_ioctl(cd, &cgc)) | 
|  | return -EIO; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* ----------------------------------------------------------------------- */ | 
|  | /* this is called by the generic cdrom driver. arg is a _kernel_ pointer,  */ | 
|  | /* because the generic cdrom driver does the user access stuff for us.     */ | 
|  | /* only cdromreadtochdr and cdromreadtocentry are left - for use with the  */ | 
|  | /* sr_disk_status interface for the generic cdrom driver.                  */ | 
|  |  | 
|  | int sr_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd, void *arg) | 
|  | { | 
|  | switch (cmd) { | 
|  | case CDROMREADTOCHDR: | 
|  | return sr_read_tochdr(cdi, arg); | 
|  | case CDROMREADTOCENTRY: | 
|  | return sr_read_tocentry(cdi, arg); | 
|  | case CDROMPLAYTRKIND: | 
|  | return sr_play_trkind(cdi, arg); | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* ----------------------------------------------------------------------- | 
|  | * a function to read all sorts of funny cdrom sectors using the READ_CD | 
|  | * scsi-3 mmc command | 
|  | * | 
|  | * lba:     linear block address | 
|  | * format:  0 = data (anything) | 
|  | *          1 = audio | 
|  | *          2 = data (mode 1) | 
|  | *          3 = data (mode 2) | 
|  | *          4 = data (mode 2 form1) | 
|  | *          5 = data (mode 2 form2) | 
|  | * blksize: 2048 | 2336 | 2340 | 2352 | 
|  | */ | 
|  |  | 
|  | static int sr_read_cd(Scsi_CD *cd, unsigned char *dest, int lba, int format, int blksize) | 
|  | { | 
|  | struct packet_command cgc; | 
|  |  | 
|  | #ifdef DEBUG | 
|  | sr_printk(KERN_INFO, cd, "sr_read_cd lba=%d format=%d blksize=%d\n", | 
|  | lba, format, blksize); | 
|  | #endif | 
|  |  | 
|  | memset(&cgc, 0, sizeof(struct packet_command)); | 
|  | cgc.cmd[0] = GPCMD_READ_CD;	/* READ_CD */ | 
|  | cgc.cmd[1] = ((format & 7) << 2); | 
|  | cgc.cmd[2] = (unsigned char) (lba >> 24) & 0xff; | 
|  | cgc.cmd[3] = (unsigned char) (lba >> 16) & 0xff; | 
|  | cgc.cmd[4] = (unsigned char) (lba >> 8) & 0xff; | 
|  | cgc.cmd[5] = (unsigned char) lba & 0xff; | 
|  | cgc.cmd[8] = 1; | 
|  | switch (blksize) { | 
|  | case 2336: | 
|  | cgc.cmd[9] = 0x58; | 
|  | break; | 
|  | case 2340: | 
|  | cgc.cmd[9] = 0x78; | 
|  | break; | 
|  | case 2352: | 
|  | cgc.cmd[9] = 0xf8; | 
|  | break; | 
|  | default: | 
|  | cgc.cmd[9] = 0x10; | 
|  | break; | 
|  | } | 
|  | cgc.buffer = dest; | 
|  | cgc.buflen = blksize; | 
|  | cgc.data_direction = DMA_FROM_DEVICE; | 
|  | cgc.timeout = IOCTL_TIMEOUT; | 
|  | return sr_do_ioctl(cd, &cgc); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * read sectors with blocksizes other than 2048 | 
|  | */ | 
|  |  | 
|  | static int sr_read_sector(Scsi_CD *cd, int lba, int blksize, unsigned char *dest) | 
|  | { | 
|  | struct packet_command cgc; | 
|  | int rc; | 
|  |  | 
|  | /* we try the READ CD command first... */ | 
|  | if (cd->readcd_known) { | 
|  | rc = sr_read_cd(cd, dest, lba, 0, blksize); | 
|  | if (-EDRIVE_CANT_DO_THIS != rc) | 
|  | return rc; | 
|  | cd->readcd_known = 0; | 
|  | sr_printk(KERN_INFO, cd, | 
|  | "CDROM does'nt support READ CD (0xbe) command\n"); | 
|  | /* fall & retry the other way */ | 
|  | } | 
|  | /* ... if this fails, we switch the blocksize using MODE SELECT */ | 
|  | if (blksize != cd->device->sector_size) { | 
|  | if (0 != (rc = sr_set_blocklength(cd, blksize))) | 
|  | return rc; | 
|  | } | 
|  | #ifdef DEBUG | 
|  | sr_printk(KERN_INFO, cd, "sr_read_sector lba=%d blksize=%d\n", | 
|  | lba, blksize); | 
|  | #endif | 
|  |  | 
|  | memset(&cgc, 0, sizeof(struct packet_command)); | 
|  | cgc.cmd[0] = GPCMD_READ_10; | 
|  | cgc.cmd[2] = (unsigned char) (lba >> 24) & 0xff; | 
|  | cgc.cmd[3] = (unsigned char) (lba >> 16) & 0xff; | 
|  | cgc.cmd[4] = (unsigned char) (lba >> 8) & 0xff; | 
|  | cgc.cmd[5] = (unsigned char) lba & 0xff; | 
|  | cgc.cmd[8] = 1; | 
|  | cgc.buffer = dest; | 
|  | cgc.buflen = blksize; | 
|  | cgc.data_direction = DMA_FROM_DEVICE; | 
|  | cgc.timeout = IOCTL_TIMEOUT; | 
|  | rc = sr_do_ioctl(cd, &cgc); | 
|  |  | 
|  | if (blksize != CD_FRAMESIZE) | 
|  | rc |= sr_set_blocklength(cd, CD_FRAMESIZE); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * read a sector in raw mode to check the sector format | 
|  | * ret: 1 == mode2 (XA), 0 == mode1, <0 == error | 
|  | */ | 
|  |  | 
|  | int sr_is_xa(Scsi_CD *cd) | 
|  | { | 
|  | unsigned char *raw_sector; | 
|  | int is_xa; | 
|  |  | 
|  | if (!xa_test) | 
|  | return 0; | 
|  |  | 
|  | raw_sector = kmalloc(2048, GFP_KERNEL); | 
|  | if (!raw_sector) | 
|  | return -ENOMEM; | 
|  | if (0 == sr_read_sector(cd, cd->ms_offset + 16, | 
|  | CD_FRAMESIZE_RAW1, raw_sector)) { | 
|  | is_xa = (raw_sector[3] == 0x02) ? 1 : 0; | 
|  | } else { | 
|  | /* read a raw sector failed for some reason. */ | 
|  | is_xa = -1; | 
|  | } | 
|  | kfree(raw_sector); | 
|  | #ifdef DEBUG | 
|  | sr_printk(KERN_INFO, cd, "sr_is_xa: %d\n", is_xa); | 
|  | #endif | 
|  | return is_xa; | 
|  | } |