| .. SPDX-License-Identifier: GPL-2.0-or-later |
| |
| Kernel driver max20730 |
| ====================== |
| |
| Supported chips: |
| |
| * Maxim MAX20710 |
| |
| Prefix: 'max20710' |
| |
| Addresses scanned: - |
| |
| Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20710.pdf |
| |
| * Maxim MAX20730 |
| |
| Prefix: 'max20730' |
| |
| Addresses scanned: - |
| |
| Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf |
| |
| * Maxim MAX20734 |
| |
| Prefix: 'max20734' |
| |
| Addresses scanned: - |
| |
| Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf |
| |
| * Maxim MAX20743 |
| |
| Prefix: 'max20743' |
| |
| Addresses scanned: - |
| |
| Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf |
| |
| Author: Guenter Roeck <linux@roeck-us.net> |
| |
| |
| Description |
| ----------- |
| |
| This driver implements support for Maxim MAX20710, MAX20730, MAX20734, and MAX20743 |
| Integrated, Step-Down Switching Regulators with PMBus support. |
| |
| The driver is a client driver to the core PMBus driver. |
| Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. |
| |
| |
| Usage Notes |
| ----------- |
| |
| This driver does not auto-detect devices. You will have to instantiate the |
| devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for |
| details. |
| |
| |
| Sysfs entries |
| ------------- |
| |
| =================== ===== ======================================================= |
| curr1_crit RW/RO Critical output current. Please see datasheet for |
| supported limits. Read-only if the chip is |
| write protected; read-write otherwise. |
| curr1_crit_alarm RO Output current critical alarm |
| curr1_input RO Output current |
| curr1_label RO 'iout1' |
| in1_alarm RO Input voltage alarm |
| in1_input RO Input voltage |
| in1_label RO 'vin' |
| in2_alarm RO Output voltage alarm |
| in2_input RO Output voltage |
| in2_label RO 'vout1' |
| temp1_crit RW/RO Critical temeperature. Supported values are 130 or 150 |
| degrees C. Read-only if the chip is write protected; |
| read-write otherwise. |
| temp1_crit_alarm RO Temperature critical alarm |
| temp1_input RO Chip temperature |
| =================== ===== ======================================================= |
