|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Copyright (c) 2009, Microsoft Corporation. | 
|  | * | 
|  | * Authors: | 
|  | *   Haiyang Zhang <haiyangz@microsoft.com> | 
|  | *   Hank Janssen  <hjanssen@microsoft.com> | 
|  | *   K. Y. Srinivasan <kys@microsoft.com> | 
|  | */ | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/sysctl.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/hyperv.h> | 
|  | #include <linux/kernel_stat.h> | 
|  | #include <linux/clockchips.h> | 
|  | #include <linux/cpu.h> | 
|  | #include <linux/sched/task_stack.h> | 
|  |  | 
|  | #include <asm/mshyperv.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/notifier.h> | 
|  | #include <linux/ptrace.h> | 
|  | #include <linux/screen_info.h> | 
|  | #include <linux/kdebug.h> | 
|  | #include <linux/efi.h> | 
|  | #include <linux/random.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/syscore_ops.h> | 
|  | #include <clocksource/hyperv_timer.h> | 
|  | #include "hyperv_vmbus.h" | 
|  |  | 
|  | struct vmbus_dynid { | 
|  | struct list_head node; | 
|  | struct hv_vmbus_device_id id; | 
|  | }; | 
|  |  | 
|  | static struct acpi_device  *hv_acpi_dev; | 
|  |  | 
|  | static struct completion probe_event; | 
|  |  | 
|  | static int hyperv_cpuhp_online; | 
|  |  | 
|  | static void *hv_panic_page; | 
|  |  | 
|  | /* | 
|  | * Boolean to control whether to report panic messages over Hyper-V. | 
|  | * | 
|  | * It can be set via /proc/sys/kernel/hyperv/record_panic_msg | 
|  | */ | 
|  | static int sysctl_record_panic_msg = 1; | 
|  |  | 
|  | static int hyperv_report_reg(void) | 
|  | { | 
|  | return !sysctl_record_panic_msg || !hv_panic_page; | 
|  | } | 
|  |  | 
|  | static int hyperv_panic_event(struct notifier_block *nb, unsigned long val, | 
|  | void *args) | 
|  | { | 
|  | struct pt_regs *regs; | 
|  |  | 
|  | vmbus_initiate_unload(true); | 
|  |  | 
|  | /* | 
|  | * Hyper-V should be notified only once about a panic.  If we will be | 
|  | * doing hyperv_report_panic_msg() later with kmsg data, don't do | 
|  | * the notification here. | 
|  | */ | 
|  | if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE | 
|  | && hyperv_report_reg()) { | 
|  | regs = current_pt_regs(); | 
|  | hyperv_report_panic(regs, val, false); | 
|  | } | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static int hyperv_die_event(struct notifier_block *nb, unsigned long val, | 
|  | void *args) | 
|  | { | 
|  | struct die_args *die = (struct die_args *)args; | 
|  | struct pt_regs *regs = die->regs; | 
|  |  | 
|  | /* | 
|  | * Hyper-V should be notified only once about a panic.  If we will be | 
|  | * doing hyperv_report_panic_msg() later with kmsg data, don't do | 
|  | * the notification here. | 
|  | */ | 
|  | if (hyperv_report_reg()) | 
|  | hyperv_report_panic(regs, val, true); | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static struct notifier_block hyperv_die_block = { | 
|  | .notifier_call = hyperv_die_event, | 
|  | }; | 
|  | static struct notifier_block hyperv_panic_block = { | 
|  | .notifier_call = hyperv_panic_event, | 
|  | }; | 
|  |  | 
|  | static const char *fb_mmio_name = "fb_range"; | 
|  | static struct resource *fb_mmio; | 
|  | static struct resource *hyperv_mmio; | 
|  | static DEFINE_MUTEX(hyperv_mmio_lock); | 
|  |  | 
|  | static int vmbus_exists(void) | 
|  | { | 
|  | if (hv_acpi_dev == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define VMBUS_ALIAS_LEN ((sizeof((struct hv_vmbus_device_id *)0)->guid) * 2) | 
|  | static void print_alias_name(struct hv_device *hv_dev, char *alias_name) | 
|  | { | 
|  | int i; | 
|  | for (i = 0; i < VMBUS_ALIAS_LEN; i += 2) | 
|  | sprintf(&alias_name[i], "%02x", hv_dev->dev_type.b[i/2]); | 
|  | } | 
|  |  | 
|  | static u8 channel_monitor_group(const struct vmbus_channel *channel) | 
|  | { | 
|  | return (u8)channel->offermsg.monitorid / 32; | 
|  | } | 
|  |  | 
|  | static u8 channel_monitor_offset(const struct vmbus_channel *channel) | 
|  | { | 
|  | return (u8)channel->offermsg.monitorid % 32; | 
|  | } | 
|  |  | 
|  | static u32 channel_pending(const struct vmbus_channel *channel, | 
|  | const struct hv_monitor_page *monitor_page) | 
|  | { | 
|  | u8 monitor_group = channel_monitor_group(channel); | 
|  |  | 
|  | return monitor_page->trigger_group[monitor_group].pending; | 
|  | } | 
|  |  | 
|  | static u32 channel_latency(const struct vmbus_channel *channel, | 
|  | const struct hv_monitor_page *monitor_page) | 
|  | { | 
|  | u8 monitor_group = channel_monitor_group(channel); | 
|  | u8 monitor_offset = channel_monitor_offset(channel); | 
|  |  | 
|  | return monitor_page->latency[monitor_group][monitor_offset]; | 
|  | } | 
|  |  | 
|  | static u32 channel_conn_id(struct vmbus_channel *channel, | 
|  | struct hv_monitor_page *monitor_page) | 
|  | { | 
|  | u8 monitor_group = channel_monitor_group(channel); | 
|  | u8 monitor_offset = channel_monitor_offset(channel); | 
|  | return monitor_page->parameter[monitor_group][monitor_offset].connectionid.u.id; | 
|  | } | 
|  |  | 
|  | static ssize_t id_show(struct device *dev, struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "%d\n", hv_dev->channel->offermsg.child_relid); | 
|  | } | 
|  | static DEVICE_ATTR_RO(id); | 
|  |  | 
|  | static ssize_t state_show(struct device *dev, struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "%d\n", hv_dev->channel->state); | 
|  | } | 
|  | static DEVICE_ATTR_RO(state); | 
|  |  | 
|  | static ssize_t monitor_id_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "%d\n", hv_dev->channel->offermsg.monitorid); | 
|  | } | 
|  | static DEVICE_ATTR_RO(monitor_id); | 
|  |  | 
|  | static ssize_t class_id_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "{%pUl}\n", | 
|  | hv_dev->channel->offermsg.offer.if_type.b); | 
|  | } | 
|  | static DEVICE_ATTR_RO(class_id); | 
|  |  | 
|  | static ssize_t device_id_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "{%pUl}\n", | 
|  | hv_dev->channel->offermsg.offer.if_instance.b); | 
|  | } | 
|  | static DEVICE_ATTR_RO(device_id); | 
|  |  | 
|  | static ssize_t modalias_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | char alias_name[VMBUS_ALIAS_LEN + 1]; | 
|  |  | 
|  | print_alias_name(hv_dev, alias_name); | 
|  | return sprintf(buf, "vmbus:%s\n", alias_name); | 
|  | } | 
|  | static DEVICE_ATTR_RO(modalias); | 
|  |  | 
|  | #ifdef CONFIG_NUMA | 
|  | static ssize_t numa_node_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | return sprintf(buf, "%d\n", hv_dev->channel->numa_node); | 
|  | } | 
|  | static DEVICE_ATTR_RO(numa_node); | 
|  | #endif | 
|  |  | 
|  | static ssize_t server_monitor_pending_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "%d\n", | 
|  | channel_pending(hv_dev->channel, | 
|  | vmbus_connection.monitor_pages[0])); | 
|  | } | 
|  | static DEVICE_ATTR_RO(server_monitor_pending); | 
|  |  | 
|  | static ssize_t client_monitor_pending_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "%d\n", | 
|  | channel_pending(hv_dev->channel, | 
|  | vmbus_connection.monitor_pages[1])); | 
|  | } | 
|  | static DEVICE_ATTR_RO(client_monitor_pending); | 
|  |  | 
|  | static ssize_t server_monitor_latency_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "%d\n", | 
|  | channel_latency(hv_dev->channel, | 
|  | vmbus_connection.monitor_pages[0])); | 
|  | } | 
|  | static DEVICE_ATTR_RO(server_monitor_latency); | 
|  |  | 
|  | static ssize_t client_monitor_latency_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "%d\n", | 
|  | channel_latency(hv_dev->channel, | 
|  | vmbus_connection.monitor_pages[1])); | 
|  | } | 
|  | static DEVICE_ATTR_RO(client_monitor_latency); | 
|  |  | 
|  | static ssize_t server_monitor_conn_id_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "%d\n", | 
|  | channel_conn_id(hv_dev->channel, | 
|  | vmbus_connection.monitor_pages[0])); | 
|  | } | 
|  | static DEVICE_ATTR_RO(server_monitor_conn_id); | 
|  |  | 
|  | static ssize_t client_monitor_conn_id_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  | return sprintf(buf, "%d\n", | 
|  | channel_conn_id(hv_dev->channel, | 
|  | vmbus_connection.monitor_pages[1])); | 
|  | } | 
|  | static DEVICE_ATTR_RO(client_monitor_conn_id); | 
|  |  | 
|  | static ssize_t out_intr_mask_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info outbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, | 
|  | &outbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%d\n", outbound.current_interrupt_mask); | 
|  | } | 
|  | static DEVICE_ATTR_RO(out_intr_mask); | 
|  |  | 
|  | static ssize_t out_read_index_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info outbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, | 
|  | &outbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | return sprintf(buf, "%d\n", outbound.current_read_index); | 
|  | } | 
|  | static DEVICE_ATTR_RO(out_read_index); | 
|  |  | 
|  | static ssize_t out_write_index_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info outbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, | 
|  | &outbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | return sprintf(buf, "%d\n", outbound.current_write_index); | 
|  | } | 
|  | static DEVICE_ATTR_RO(out_write_index); | 
|  |  | 
|  | static ssize_t out_read_bytes_avail_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info outbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, | 
|  | &outbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | return sprintf(buf, "%d\n", outbound.bytes_avail_toread); | 
|  | } | 
|  | static DEVICE_ATTR_RO(out_read_bytes_avail); | 
|  |  | 
|  | static ssize_t out_write_bytes_avail_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info outbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, | 
|  | &outbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | return sprintf(buf, "%d\n", outbound.bytes_avail_towrite); | 
|  | } | 
|  | static DEVICE_ATTR_RO(out_write_bytes_avail); | 
|  |  | 
|  | static ssize_t in_intr_mask_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info inbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%d\n", inbound.current_interrupt_mask); | 
|  | } | 
|  | static DEVICE_ATTR_RO(in_intr_mask); | 
|  |  | 
|  | static ssize_t in_read_index_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info inbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%d\n", inbound.current_read_index); | 
|  | } | 
|  | static DEVICE_ATTR_RO(in_read_index); | 
|  |  | 
|  | static ssize_t in_write_index_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info inbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%d\n", inbound.current_write_index); | 
|  | } | 
|  | static DEVICE_ATTR_RO(in_write_index); | 
|  |  | 
|  | static ssize_t in_read_bytes_avail_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info inbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%d\n", inbound.bytes_avail_toread); | 
|  | } | 
|  | static DEVICE_ATTR_RO(in_read_bytes_avail); | 
|  |  | 
|  | static ssize_t in_write_bytes_avail_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct hv_ring_buffer_debug_info inbound; | 
|  | int ret; | 
|  |  | 
|  | if (!hv_dev->channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return sprintf(buf, "%d\n", inbound.bytes_avail_towrite); | 
|  | } | 
|  | static DEVICE_ATTR_RO(in_write_bytes_avail); | 
|  |  | 
|  | static ssize_t channel_vp_mapping_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | struct vmbus_channel *channel = hv_dev->channel, *cur_sc; | 
|  | unsigned long flags; | 
|  | int buf_size = PAGE_SIZE, n_written, tot_written; | 
|  | struct list_head *cur; | 
|  |  | 
|  | if (!channel) | 
|  | return -ENODEV; | 
|  |  | 
|  | tot_written = snprintf(buf, buf_size, "%u:%u\n", | 
|  | channel->offermsg.child_relid, channel->target_cpu); | 
|  |  | 
|  | spin_lock_irqsave(&channel->lock, flags); | 
|  |  | 
|  | list_for_each(cur, &channel->sc_list) { | 
|  | if (tot_written >= buf_size - 1) | 
|  | break; | 
|  |  | 
|  | cur_sc = list_entry(cur, struct vmbus_channel, sc_list); | 
|  | n_written = scnprintf(buf + tot_written, | 
|  | buf_size - tot_written, | 
|  | "%u:%u\n", | 
|  | cur_sc->offermsg.child_relid, | 
|  | cur_sc->target_cpu); | 
|  | tot_written += n_written; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&channel->lock, flags); | 
|  |  | 
|  | return tot_written; | 
|  | } | 
|  | static DEVICE_ATTR_RO(channel_vp_mapping); | 
|  |  | 
|  | static ssize_t vendor_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | return sprintf(buf, "0x%x\n", hv_dev->vendor_id); | 
|  | } | 
|  | static DEVICE_ATTR_RO(vendor); | 
|  |  | 
|  | static ssize_t device_show(struct device *dev, | 
|  | struct device_attribute *dev_attr, | 
|  | char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | return sprintf(buf, "0x%x\n", hv_dev->device_id); | 
|  | } | 
|  | static DEVICE_ATTR_RO(device); | 
|  |  | 
|  | static ssize_t driver_override_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | char *driver_override, *old, *cp; | 
|  |  | 
|  | /* We need to keep extra room for a newline */ | 
|  | if (count >= (PAGE_SIZE - 1)) | 
|  | return -EINVAL; | 
|  |  | 
|  | driver_override = kstrndup(buf, count, GFP_KERNEL); | 
|  | if (!driver_override) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cp = strchr(driver_override, '\n'); | 
|  | if (cp) | 
|  | *cp = '\0'; | 
|  |  | 
|  | device_lock(dev); | 
|  | old = hv_dev->driver_override; | 
|  | if (strlen(driver_override)) { | 
|  | hv_dev->driver_override = driver_override; | 
|  | } else { | 
|  | kfree(driver_override); | 
|  | hv_dev->driver_override = NULL; | 
|  | } | 
|  | device_unlock(dev); | 
|  |  | 
|  | kfree(old); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t driver_override_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  | ssize_t len; | 
|  |  | 
|  | device_lock(dev); | 
|  | len = snprintf(buf, PAGE_SIZE, "%s\n", hv_dev->driver_override); | 
|  | device_unlock(dev); | 
|  |  | 
|  | return len; | 
|  | } | 
|  | static DEVICE_ATTR_RW(driver_override); | 
|  |  | 
|  | /* Set up per device attributes in /sys/bus/vmbus/devices/<bus device> */ | 
|  | static struct attribute *vmbus_dev_attrs[] = { | 
|  | &dev_attr_id.attr, | 
|  | &dev_attr_state.attr, | 
|  | &dev_attr_monitor_id.attr, | 
|  | &dev_attr_class_id.attr, | 
|  | &dev_attr_device_id.attr, | 
|  | &dev_attr_modalias.attr, | 
|  | #ifdef CONFIG_NUMA | 
|  | &dev_attr_numa_node.attr, | 
|  | #endif | 
|  | &dev_attr_server_monitor_pending.attr, | 
|  | &dev_attr_client_monitor_pending.attr, | 
|  | &dev_attr_server_monitor_latency.attr, | 
|  | &dev_attr_client_monitor_latency.attr, | 
|  | &dev_attr_server_monitor_conn_id.attr, | 
|  | &dev_attr_client_monitor_conn_id.attr, | 
|  | &dev_attr_out_intr_mask.attr, | 
|  | &dev_attr_out_read_index.attr, | 
|  | &dev_attr_out_write_index.attr, | 
|  | &dev_attr_out_read_bytes_avail.attr, | 
|  | &dev_attr_out_write_bytes_avail.attr, | 
|  | &dev_attr_in_intr_mask.attr, | 
|  | &dev_attr_in_read_index.attr, | 
|  | &dev_attr_in_write_index.attr, | 
|  | &dev_attr_in_read_bytes_avail.attr, | 
|  | &dev_attr_in_write_bytes_avail.attr, | 
|  | &dev_attr_channel_vp_mapping.attr, | 
|  | &dev_attr_vendor.attr, | 
|  | &dev_attr_device.attr, | 
|  | &dev_attr_driver_override.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Device-level attribute_group callback function. Returns the permission for | 
|  | * each attribute, and returns 0 if an attribute is not visible. | 
|  | */ | 
|  | static umode_t vmbus_dev_attr_is_visible(struct kobject *kobj, | 
|  | struct attribute *attr, int idx) | 
|  | { | 
|  | struct device *dev = kobj_to_dev(kobj); | 
|  | const struct hv_device *hv_dev = device_to_hv_device(dev); | 
|  |  | 
|  | /* Hide the monitor attributes if the monitor mechanism is not used. */ | 
|  | if (!hv_dev->channel->offermsg.monitor_allocated && | 
|  | (attr == &dev_attr_monitor_id.attr || | 
|  | attr == &dev_attr_server_monitor_pending.attr || | 
|  | attr == &dev_attr_client_monitor_pending.attr || | 
|  | attr == &dev_attr_server_monitor_latency.attr || | 
|  | attr == &dev_attr_client_monitor_latency.attr || | 
|  | attr == &dev_attr_server_monitor_conn_id.attr || | 
|  | attr == &dev_attr_client_monitor_conn_id.attr)) | 
|  | return 0; | 
|  |  | 
|  | return attr->mode; | 
|  | } | 
|  |  | 
|  | static const struct attribute_group vmbus_dev_group = { | 
|  | .attrs = vmbus_dev_attrs, | 
|  | .is_visible = vmbus_dev_attr_is_visible | 
|  | }; | 
|  | __ATTRIBUTE_GROUPS(vmbus_dev); | 
|  |  | 
|  | /* | 
|  | * vmbus_uevent - add uevent for our device | 
|  | * | 
|  | * This routine is invoked when a device is added or removed on the vmbus to | 
|  | * generate a uevent to udev in the userspace. The udev will then look at its | 
|  | * rule and the uevent generated here to load the appropriate driver | 
|  | * | 
|  | * The alias string will be of the form vmbus:guid where guid is the string | 
|  | * representation of the device guid (each byte of the guid will be | 
|  | * represented with two hex characters. | 
|  | */ | 
|  | static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env) | 
|  | { | 
|  | struct hv_device *dev = device_to_hv_device(device); | 
|  | int ret; | 
|  | char alias_name[VMBUS_ALIAS_LEN + 1]; | 
|  |  | 
|  | print_alias_name(dev, alias_name); | 
|  | ret = add_uevent_var(env, "MODALIAS=vmbus:%s", alias_name); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct hv_vmbus_device_id * | 
|  | hv_vmbus_dev_match(const struct hv_vmbus_device_id *id, const guid_t *guid) | 
|  | { | 
|  | if (id == NULL) | 
|  | return NULL; /* empty device table */ | 
|  |  | 
|  | for (; !guid_is_null(&id->guid); id++) | 
|  | if (guid_equal(&id->guid, guid)) | 
|  | return id; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static const struct hv_vmbus_device_id * | 
|  | hv_vmbus_dynid_match(struct hv_driver *drv, const guid_t *guid) | 
|  | { | 
|  | const struct hv_vmbus_device_id *id = NULL; | 
|  | struct vmbus_dynid *dynid; | 
|  |  | 
|  | spin_lock(&drv->dynids.lock); | 
|  | list_for_each_entry(dynid, &drv->dynids.list, node) { | 
|  | if (guid_equal(&dynid->id.guid, guid)) { | 
|  | id = &dynid->id; | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&drv->dynids.lock); | 
|  |  | 
|  | return id; | 
|  | } | 
|  |  | 
|  | static const struct hv_vmbus_device_id vmbus_device_null; | 
|  |  | 
|  | /* | 
|  | * Return a matching hv_vmbus_device_id pointer. | 
|  | * If there is no match, return NULL. | 
|  | */ | 
|  | static const struct hv_vmbus_device_id *hv_vmbus_get_id(struct hv_driver *drv, | 
|  | struct hv_device *dev) | 
|  | { | 
|  | const guid_t *guid = &dev->dev_type; | 
|  | const struct hv_vmbus_device_id *id; | 
|  |  | 
|  | /* When driver_override is set, only bind to the matching driver */ | 
|  | if (dev->driver_override && strcmp(dev->driver_override, drv->name)) | 
|  | return NULL; | 
|  |  | 
|  | /* Look at the dynamic ids first, before the static ones */ | 
|  | id = hv_vmbus_dynid_match(drv, guid); | 
|  | if (!id) | 
|  | id = hv_vmbus_dev_match(drv->id_table, guid); | 
|  |  | 
|  | /* driver_override will always match, send a dummy id */ | 
|  | if (!id && dev->driver_override) | 
|  | id = &vmbus_device_null; | 
|  |  | 
|  | return id; | 
|  | } | 
|  |  | 
|  | /* vmbus_add_dynid - add a new device ID to this driver and re-probe devices */ | 
|  | static int vmbus_add_dynid(struct hv_driver *drv, guid_t *guid) | 
|  | { | 
|  | struct vmbus_dynid *dynid; | 
|  |  | 
|  | dynid = kzalloc(sizeof(*dynid), GFP_KERNEL); | 
|  | if (!dynid) | 
|  | return -ENOMEM; | 
|  |  | 
|  | dynid->id.guid = *guid; | 
|  |  | 
|  | spin_lock(&drv->dynids.lock); | 
|  | list_add_tail(&dynid->node, &drv->dynids.list); | 
|  | spin_unlock(&drv->dynids.lock); | 
|  |  | 
|  | return driver_attach(&drv->driver); | 
|  | } | 
|  |  | 
|  | static void vmbus_free_dynids(struct hv_driver *drv) | 
|  | { | 
|  | struct vmbus_dynid *dynid, *n; | 
|  |  | 
|  | spin_lock(&drv->dynids.lock); | 
|  | list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) { | 
|  | list_del(&dynid->node); | 
|  | kfree(dynid); | 
|  | } | 
|  | spin_unlock(&drv->dynids.lock); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * store_new_id - sysfs frontend to vmbus_add_dynid() | 
|  | * | 
|  | * Allow GUIDs to be added to an existing driver via sysfs. | 
|  | */ | 
|  | static ssize_t new_id_store(struct device_driver *driver, const char *buf, | 
|  | size_t count) | 
|  | { | 
|  | struct hv_driver *drv = drv_to_hv_drv(driver); | 
|  | guid_t guid; | 
|  | ssize_t retval; | 
|  |  | 
|  | retval = guid_parse(buf, &guid); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | if (hv_vmbus_dynid_match(drv, &guid)) | 
|  | return -EEXIST; | 
|  |  | 
|  | retval = vmbus_add_dynid(drv, &guid); | 
|  | if (retval) | 
|  | return retval; | 
|  | return count; | 
|  | } | 
|  | static DRIVER_ATTR_WO(new_id); | 
|  |  | 
|  | /* | 
|  | * store_remove_id - remove a PCI device ID from this driver | 
|  | * | 
|  | * Removes a dynamic pci device ID to this driver. | 
|  | */ | 
|  | static ssize_t remove_id_store(struct device_driver *driver, const char *buf, | 
|  | size_t count) | 
|  | { | 
|  | struct hv_driver *drv = drv_to_hv_drv(driver); | 
|  | struct vmbus_dynid *dynid, *n; | 
|  | guid_t guid; | 
|  | ssize_t retval; | 
|  |  | 
|  | retval = guid_parse(buf, &guid); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | retval = -ENODEV; | 
|  | spin_lock(&drv->dynids.lock); | 
|  | list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) { | 
|  | struct hv_vmbus_device_id *id = &dynid->id; | 
|  |  | 
|  | if (guid_equal(&id->guid, &guid)) { | 
|  | list_del(&dynid->node); | 
|  | kfree(dynid); | 
|  | retval = count; | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&drv->dynids.lock); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  | static DRIVER_ATTR_WO(remove_id); | 
|  |  | 
|  | static struct attribute *vmbus_drv_attrs[] = { | 
|  | &driver_attr_new_id.attr, | 
|  | &driver_attr_remove_id.attr, | 
|  | NULL, | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(vmbus_drv); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * vmbus_match - Attempt to match the specified device to the specified driver | 
|  | */ | 
|  | static int vmbus_match(struct device *device, struct device_driver *driver) | 
|  | { | 
|  | struct hv_driver *drv = drv_to_hv_drv(driver); | 
|  | struct hv_device *hv_dev = device_to_hv_device(device); | 
|  |  | 
|  | /* The hv_sock driver handles all hv_sock offers. */ | 
|  | if (is_hvsock_channel(hv_dev->channel)) | 
|  | return drv->hvsock; | 
|  |  | 
|  | if (hv_vmbus_get_id(drv, hv_dev)) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vmbus_probe - Add the new vmbus's child device | 
|  | */ | 
|  | static int vmbus_probe(struct device *child_device) | 
|  | { | 
|  | int ret = 0; | 
|  | struct hv_driver *drv = | 
|  | drv_to_hv_drv(child_device->driver); | 
|  | struct hv_device *dev = device_to_hv_device(child_device); | 
|  | const struct hv_vmbus_device_id *dev_id; | 
|  |  | 
|  | dev_id = hv_vmbus_get_id(drv, dev); | 
|  | if (drv->probe) { | 
|  | ret = drv->probe(dev, dev_id); | 
|  | if (ret != 0) | 
|  | pr_err("probe failed for device %s (%d)\n", | 
|  | dev_name(child_device), ret); | 
|  |  | 
|  | } else { | 
|  | pr_err("probe not set for driver %s\n", | 
|  | dev_name(child_device)); | 
|  | ret = -ENODEV; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vmbus_remove - Remove a vmbus device | 
|  | */ | 
|  | static int vmbus_remove(struct device *child_device) | 
|  | { | 
|  | struct hv_driver *drv; | 
|  | struct hv_device *dev = device_to_hv_device(child_device); | 
|  |  | 
|  | if (child_device->driver) { | 
|  | drv = drv_to_hv_drv(child_device->driver); | 
|  | if (drv->remove) | 
|  | drv->remove(dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * vmbus_shutdown - Shutdown a vmbus device | 
|  | */ | 
|  | static void vmbus_shutdown(struct device *child_device) | 
|  | { | 
|  | struct hv_driver *drv; | 
|  | struct hv_device *dev = device_to_hv_device(child_device); | 
|  |  | 
|  |  | 
|  | /* The device may not be attached yet */ | 
|  | if (!child_device->driver) | 
|  | return; | 
|  |  | 
|  | drv = drv_to_hv_drv(child_device->driver); | 
|  |  | 
|  | if (drv->shutdown) | 
|  | drv->shutdown(dev); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | /* | 
|  | * vmbus_suspend - Suspend a vmbus device | 
|  | */ | 
|  | static int vmbus_suspend(struct device *child_device) | 
|  | { | 
|  | struct hv_driver *drv; | 
|  | struct hv_device *dev = device_to_hv_device(child_device); | 
|  |  | 
|  | /* The device may not be attached yet */ | 
|  | if (!child_device->driver) | 
|  | return 0; | 
|  |  | 
|  | drv = drv_to_hv_drv(child_device->driver); | 
|  | if (!drv->suspend) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return drv->suspend(dev); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vmbus_resume - Resume a vmbus device | 
|  | */ | 
|  | static int vmbus_resume(struct device *child_device) | 
|  | { | 
|  | struct hv_driver *drv; | 
|  | struct hv_device *dev = device_to_hv_device(child_device); | 
|  |  | 
|  | /* The device may not be attached yet */ | 
|  | if (!child_device->driver) | 
|  | return 0; | 
|  |  | 
|  | drv = drv_to_hv_drv(child_device->driver); | 
|  | if (!drv->resume) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | return drv->resume(dev); | 
|  | } | 
|  | #else | 
|  | #define vmbus_suspend NULL | 
|  | #define vmbus_resume NULL | 
|  | #endif /* CONFIG_PM_SLEEP */ | 
|  |  | 
|  | /* | 
|  | * vmbus_device_release - Final callback release of the vmbus child device | 
|  | */ | 
|  | static void vmbus_device_release(struct device *device) | 
|  | { | 
|  | struct hv_device *hv_dev = device_to_hv_device(device); | 
|  | struct vmbus_channel *channel = hv_dev->channel; | 
|  |  | 
|  | mutex_lock(&vmbus_connection.channel_mutex); | 
|  | hv_process_channel_removal(channel); | 
|  | mutex_unlock(&vmbus_connection.channel_mutex); | 
|  | kfree(hv_dev); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note: we must use the "noirq" ops: see the comment before vmbus_bus_pm. | 
|  | * | 
|  | * suspend_noirq/resume_noirq are set to NULL to support Suspend-to-Idle: we | 
|  | * shouldn't suspend the vmbus devices upon Suspend-to-Idle, otherwise there | 
|  | * is no way to wake up a Generation-2 VM. | 
|  | * | 
|  | * The other 4 ops are for hibernation. | 
|  | */ | 
|  |  | 
|  | static const struct dev_pm_ops vmbus_pm = { | 
|  | .suspend_noirq	= NULL, | 
|  | .resume_noirq	= NULL, | 
|  | .freeze_noirq	= vmbus_suspend, | 
|  | .thaw_noirq	= vmbus_resume, | 
|  | .poweroff_noirq	= vmbus_suspend, | 
|  | .restore_noirq	= vmbus_resume, | 
|  | }; | 
|  |  | 
|  | /* The one and only one */ | 
|  | static struct bus_type  hv_bus = { | 
|  | .name =		"vmbus", | 
|  | .match =		vmbus_match, | 
|  | .shutdown =		vmbus_shutdown, | 
|  | .remove =		vmbus_remove, | 
|  | .probe =		vmbus_probe, | 
|  | .uevent =		vmbus_uevent, | 
|  | .dev_groups =		vmbus_dev_groups, | 
|  | .drv_groups =		vmbus_drv_groups, | 
|  | .pm =			&vmbus_pm, | 
|  | }; | 
|  |  | 
|  | struct onmessage_work_context { | 
|  | struct work_struct work; | 
|  | struct hv_message msg; | 
|  | }; | 
|  |  | 
|  | static void vmbus_onmessage_work(struct work_struct *work) | 
|  | { | 
|  | struct onmessage_work_context *ctx; | 
|  |  | 
|  | /* Do not process messages if we're in DISCONNECTED state */ | 
|  | if (vmbus_connection.conn_state == DISCONNECTED) | 
|  | return; | 
|  |  | 
|  | ctx = container_of(work, struct onmessage_work_context, | 
|  | work); | 
|  | vmbus_onmessage(&ctx->msg); | 
|  | kfree(ctx); | 
|  | } | 
|  |  | 
|  | void vmbus_on_msg_dpc(unsigned long data) | 
|  | { | 
|  | struct hv_per_cpu_context *hv_cpu = (void *)data; | 
|  | void *page_addr = hv_cpu->synic_message_page; | 
|  | struct hv_message *msg = (struct hv_message *)page_addr + | 
|  | VMBUS_MESSAGE_SINT; | 
|  | struct vmbus_channel_message_header *hdr; | 
|  | const struct vmbus_channel_message_table_entry *entry; | 
|  | struct onmessage_work_context *ctx; | 
|  | u32 message_type = msg->header.message_type; | 
|  |  | 
|  | if (message_type == HVMSG_NONE) | 
|  | /* no msg */ | 
|  | return; | 
|  |  | 
|  | hdr = (struct vmbus_channel_message_header *)msg->u.payload; | 
|  |  | 
|  | trace_vmbus_on_msg_dpc(hdr); | 
|  |  | 
|  | if (hdr->msgtype >= CHANNELMSG_COUNT) { | 
|  | WARN_ONCE(1, "unknown msgtype=%d\n", hdr->msgtype); | 
|  | goto msg_handled; | 
|  | } | 
|  |  | 
|  | entry = &channel_message_table[hdr->msgtype]; | 
|  |  | 
|  | if (!entry->message_handler) | 
|  | goto msg_handled; | 
|  |  | 
|  | if (entry->handler_type	== VMHT_BLOCKING) { | 
|  | ctx = kmalloc(sizeof(*ctx), GFP_ATOMIC); | 
|  | if (ctx == NULL) | 
|  | return; | 
|  |  | 
|  | INIT_WORK(&ctx->work, vmbus_onmessage_work); | 
|  | memcpy(&ctx->msg, msg, sizeof(*msg)); | 
|  |  | 
|  | /* | 
|  | * The host can generate a rescind message while we | 
|  | * may still be handling the original offer. We deal with | 
|  | * this condition by ensuring the processing is done on the | 
|  | * same CPU. | 
|  | */ | 
|  | switch (hdr->msgtype) { | 
|  | case CHANNELMSG_RESCIND_CHANNELOFFER: | 
|  | /* | 
|  | * If we are handling the rescind message; | 
|  | * schedule the work on the global work queue. | 
|  | * | 
|  | * The OFFER message and the RESCIND message should | 
|  | * not be handled by the same serialized work queue, | 
|  | * because the OFFER handler may call vmbus_open(), | 
|  | * which tries to open the channel by sending an | 
|  | * OPEN_CHANNEL message to the host and waits for | 
|  | * the host's response; however, if the host has | 
|  | * rescinded the channel before it receives the | 
|  | * OPEN_CHANNEL message, the host just silently | 
|  | * ignores the OPEN_CHANNEL message; as a result, | 
|  | * the guest's OFFER handler hangs for ever, if we | 
|  | * handle the RESCIND message in the same serialized | 
|  | * work queue: the RESCIND handler can not start to | 
|  | * run before the OFFER handler finishes. | 
|  | */ | 
|  | schedule_work_on(VMBUS_CONNECT_CPU, | 
|  | &ctx->work); | 
|  | break; | 
|  |  | 
|  | case CHANNELMSG_OFFERCHANNEL: | 
|  | atomic_inc(&vmbus_connection.offer_in_progress); | 
|  | queue_work_on(VMBUS_CONNECT_CPU, | 
|  | vmbus_connection.work_queue, | 
|  | &ctx->work); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | queue_work(vmbus_connection.work_queue, &ctx->work); | 
|  | } | 
|  | } else | 
|  | entry->message_handler(hdr); | 
|  |  | 
|  | msg_handled: | 
|  | vmbus_signal_eom(msg, message_type); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | /* | 
|  | * Fake RESCIND_CHANNEL messages to clean up hv_sock channels by force for | 
|  | * hibernation, because hv_sock connections can not persist across hibernation. | 
|  | */ | 
|  | static void vmbus_force_channel_rescinded(struct vmbus_channel *channel) | 
|  | { | 
|  | struct onmessage_work_context *ctx; | 
|  | struct vmbus_channel_rescind_offer *rescind; | 
|  |  | 
|  | WARN_ON(!is_hvsock_channel(channel)); | 
|  |  | 
|  | /* | 
|  | * sizeof(*ctx) is small and the allocation should really not fail, | 
|  | * otherwise the state of the hv_sock connections ends up in limbo. | 
|  | */ | 
|  | ctx = kzalloc(sizeof(*ctx), GFP_KERNEL | __GFP_NOFAIL); | 
|  |  | 
|  | /* | 
|  | * So far, these are not really used by Linux. Just set them to the | 
|  | * reasonable values conforming to the definitions of the fields. | 
|  | */ | 
|  | ctx->msg.header.message_type = 1; | 
|  | ctx->msg.header.payload_size = sizeof(*rescind); | 
|  |  | 
|  | /* These values are actually used by Linux. */ | 
|  | rescind = (struct vmbus_channel_rescind_offer *)ctx->msg.u.payload; | 
|  | rescind->header.msgtype = CHANNELMSG_RESCIND_CHANNELOFFER; | 
|  | rescind->child_relid = channel->offermsg.child_relid; | 
|  |  | 
|  | INIT_WORK(&ctx->work, vmbus_onmessage_work); | 
|  |  | 
|  | queue_work_on(VMBUS_CONNECT_CPU, | 
|  | vmbus_connection.work_queue, | 
|  | &ctx->work); | 
|  | } | 
|  | #endif /* CONFIG_PM_SLEEP */ | 
|  |  | 
|  | /* | 
|  | * Direct callback for channels using other deferred processing | 
|  | */ | 
|  | static void vmbus_channel_isr(struct vmbus_channel *channel) | 
|  | { | 
|  | void (*callback_fn)(void *); | 
|  |  | 
|  | callback_fn = READ_ONCE(channel->onchannel_callback); | 
|  | if (likely(callback_fn != NULL)) | 
|  | (*callback_fn)(channel->channel_callback_context); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Schedule all channels with events pending | 
|  | */ | 
|  | static void vmbus_chan_sched(struct hv_per_cpu_context *hv_cpu) | 
|  | { | 
|  | unsigned long *recv_int_page; | 
|  | u32 maxbits, relid; | 
|  |  | 
|  | if (vmbus_proto_version < VERSION_WIN8) { | 
|  | maxbits = MAX_NUM_CHANNELS_SUPPORTED; | 
|  | recv_int_page = vmbus_connection.recv_int_page; | 
|  | } else { | 
|  | /* | 
|  | * When the host is win8 and beyond, the event page | 
|  | * can be directly checked to get the id of the channel | 
|  | * that has the interrupt pending. | 
|  | */ | 
|  | void *page_addr = hv_cpu->synic_event_page; | 
|  | union hv_synic_event_flags *event | 
|  | = (union hv_synic_event_flags *)page_addr + | 
|  | VMBUS_MESSAGE_SINT; | 
|  |  | 
|  | maxbits = HV_EVENT_FLAGS_COUNT; | 
|  | recv_int_page = event->flags; | 
|  | } | 
|  |  | 
|  | if (unlikely(!recv_int_page)) | 
|  | return; | 
|  |  | 
|  | for_each_set_bit(relid, recv_int_page, maxbits) { | 
|  | struct vmbus_channel *channel; | 
|  |  | 
|  | if (!sync_test_and_clear_bit(relid, recv_int_page)) | 
|  | continue; | 
|  |  | 
|  | /* Special case - vmbus channel protocol msg */ | 
|  | if (relid == 0) | 
|  | continue; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | /* Find channel based on relid */ | 
|  | list_for_each_entry_rcu(channel, &hv_cpu->chan_list, percpu_list) { | 
|  | if (channel->offermsg.child_relid != relid) | 
|  | continue; | 
|  |  | 
|  | if (channel->rescind) | 
|  | continue; | 
|  |  | 
|  | trace_vmbus_chan_sched(channel); | 
|  |  | 
|  | ++channel->interrupts; | 
|  |  | 
|  | switch (channel->callback_mode) { | 
|  | case HV_CALL_ISR: | 
|  | vmbus_channel_isr(channel); | 
|  | break; | 
|  |  | 
|  | case HV_CALL_BATCHED: | 
|  | hv_begin_read(&channel->inbound); | 
|  | /* fallthrough */ | 
|  | case HV_CALL_DIRECT: | 
|  | tasklet_schedule(&channel->callback_event); | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void vmbus_isr(void) | 
|  | { | 
|  | struct hv_per_cpu_context *hv_cpu | 
|  | = this_cpu_ptr(hv_context.cpu_context); | 
|  | void *page_addr = hv_cpu->synic_event_page; | 
|  | struct hv_message *msg; | 
|  | union hv_synic_event_flags *event; | 
|  | bool handled = false; | 
|  |  | 
|  | if (unlikely(page_addr == NULL)) | 
|  | return; | 
|  |  | 
|  | event = (union hv_synic_event_flags *)page_addr + | 
|  | VMBUS_MESSAGE_SINT; | 
|  | /* | 
|  | * Check for events before checking for messages. This is the order | 
|  | * in which events and messages are checked in Windows guests on | 
|  | * Hyper-V, and the Windows team suggested we do the same. | 
|  | */ | 
|  |  | 
|  | if ((vmbus_proto_version == VERSION_WS2008) || | 
|  | (vmbus_proto_version == VERSION_WIN7)) { | 
|  |  | 
|  | /* Since we are a child, we only need to check bit 0 */ | 
|  | if (sync_test_and_clear_bit(0, event->flags)) | 
|  | handled = true; | 
|  | } else { | 
|  | /* | 
|  | * Our host is win8 or above. The signaling mechanism | 
|  | * has changed and we can directly look at the event page. | 
|  | * If bit n is set then we have an interrup on the channel | 
|  | * whose id is n. | 
|  | */ | 
|  | handled = true; | 
|  | } | 
|  |  | 
|  | if (handled) | 
|  | vmbus_chan_sched(hv_cpu); | 
|  |  | 
|  | page_addr = hv_cpu->synic_message_page; | 
|  | msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT; | 
|  |  | 
|  | /* Check if there are actual msgs to be processed */ | 
|  | if (msg->header.message_type != HVMSG_NONE) { | 
|  | if (msg->header.message_type == HVMSG_TIMER_EXPIRED) { | 
|  | hv_stimer0_isr(); | 
|  | vmbus_signal_eom(msg, HVMSG_TIMER_EXPIRED); | 
|  | } else | 
|  | tasklet_schedule(&hv_cpu->msg_dpc); | 
|  | } | 
|  |  | 
|  | add_interrupt_randomness(HYPERVISOR_CALLBACK_VECTOR); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Callback from kmsg_dump. Grab as much as possible from the end of the kmsg | 
|  | * buffer and call into Hyper-V to transfer the data. | 
|  | */ | 
|  | static void hv_kmsg_dump(struct kmsg_dumper *dumper, | 
|  | enum kmsg_dump_reason reason) | 
|  | { | 
|  | size_t bytes_written; | 
|  | phys_addr_t panic_pa; | 
|  |  | 
|  | /* We are only interested in panics. */ | 
|  | if ((reason != KMSG_DUMP_PANIC) || (!sysctl_record_panic_msg)) | 
|  | return; | 
|  |  | 
|  | panic_pa = virt_to_phys(hv_panic_page); | 
|  |  | 
|  | /* | 
|  | * Write dump contents to the page. No need to synchronize; panic should | 
|  | * be single-threaded. | 
|  | */ | 
|  | kmsg_dump_get_buffer(dumper, true, hv_panic_page, PAGE_SIZE, | 
|  | &bytes_written); | 
|  | if (bytes_written) | 
|  | hyperv_report_panic_msg(panic_pa, bytes_written); | 
|  | } | 
|  |  | 
|  | static struct kmsg_dumper hv_kmsg_dumper = { | 
|  | .dump = hv_kmsg_dump, | 
|  | }; | 
|  |  | 
|  | static struct ctl_table_header *hv_ctl_table_hdr; | 
|  |  | 
|  | /* | 
|  | * sysctl option to allow the user to control whether kmsg data should be | 
|  | * reported to Hyper-V on panic. | 
|  | */ | 
|  | static struct ctl_table hv_ctl_table[] = { | 
|  | { | 
|  | .procname       = "hyperv_record_panic_msg", | 
|  | .data           = &sysctl_record_panic_msg, | 
|  | .maxlen         = sizeof(int), | 
|  | .mode           = 0644, | 
|  | .proc_handler   = proc_dointvec_minmax, | 
|  | .extra1		= SYSCTL_ZERO, | 
|  | .extra2		= SYSCTL_ONE | 
|  | }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static struct ctl_table hv_root_table[] = { | 
|  | { | 
|  | .procname	= "kernel", | 
|  | .mode		= 0555, | 
|  | .child		= hv_ctl_table | 
|  | }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * vmbus_bus_init -Main vmbus driver initialization routine. | 
|  | * | 
|  | * Here, we | 
|  | *	- initialize the vmbus driver context | 
|  | *	- invoke the vmbus hv main init routine | 
|  | *	- retrieve the channel offers | 
|  | */ | 
|  | static int vmbus_bus_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* Hypervisor initialization...setup hypercall page..etc */ | 
|  | ret = hv_init(); | 
|  | if (ret != 0) { | 
|  | pr_err("Unable to initialize the hypervisor - 0x%x\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = bus_register(&hv_bus); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | hv_setup_vmbus_irq(vmbus_isr); | 
|  |  | 
|  | ret = hv_synic_alloc(); | 
|  | if (ret) | 
|  | goto err_alloc; | 
|  |  | 
|  | ret = hv_stimer_alloc(VMBUS_MESSAGE_SINT); | 
|  | if (ret < 0) | 
|  | goto err_alloc; | 
|  |  | 
|  | /* | 
|  | * Initialize the per-cpu interrupt state and stimer state. | 
|  | * Then connect to the host. | 
|  | */ | 
|  | ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "hyperv/vmbus:online", | 
|  | hv_synic_init, hv_synic_cleanup); | 
|  | if (ret < 0) | 
|  | goto err_cpuhp; | 
|  | hyperv_cpuhp_online = ret; | 
|  |  | 
|  | ret = vmbus_connect(); | 
|  | if (ret) | 
|  | goto err_connect; | 
|  |  | 
|  | /* | 
|  | * Only register if the crash MSRs are available | 
|  | */ | 
|  | if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) { | 
|  | u64 hyperv_crash_ctl; | 
|  | /* | 
|  | * Sysctl registration is not fatal, since by default | 
|  | * reporting is enabled. | 
|  | */ | 
|  | hv_ctl_table_hdr = register_sysctl_table(hv_root_table); | 
|  | if (!hv_ctl_table_hdr) | 
|  | pr_err("Hyper-V: sysctl table register error"); | 
|  |  | 
|  | /* | 
|  | * Register for panic kmsg callback only if the right | 
|  | * capability is supported by the hypervisor. | 
|  | */ | 
|  | hv_get_crash_ctl(hyperv_crash_ctl); | 
|  | if (hyperv_crash_ctl & HV_CRASH_CTL_CRASH_NOTIFY_MSG) { | 
|  | hv_panic_page = (void *)get_zeroed_page(GFP_KERNEL); | 
|  | if (hv_panic_page) { | 
|  | ret = kmsg_dump_register(&hv_kmsg_dumper); | 
|  | if (ret) { | 
|  | pr_err("Hyper-V: kmsg dump register " | 
|  | "error 0x%x\n", ret); | 
|  | hv_free_hyperv_page( | 
|  | (unsigned long)hv_panic_page); | 
|  | hv_panic_page = NULL; | 
|  | } | 
|  | } else | 
|  | pr_err("Hyper-V: panic message page memory " | 
|  | "allocation failed"); | 
|  | } | 
|  |  | 
|  | register_die_notifier(&hyperv_die_block); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Always register the panic notifier because we need to unload | 
|  | * the VMbus channel connection to prevent any VMbus | 
|  | * activity after the VM panics. | 
|  | */ | 
|  | atomic_notifier_chain_register(&panic_notifier_list, | 
|  | &hyperv_panic_block); | 
|  |  | 
|  | vmbus_request_offers(); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_connect: | 
|  | cpuhp_remove_state(hyperv_cpuhp_online); | 
|  | err_cpuhp: | 
|  | hv_stimer_free(); | 
|  | err_alloc: | 
|  | hv_synic_free(); | 
|  | hv_remove_vmbus_irq(); | 
|  |  | 
|  | bus_unregister(&hv_bus); | 
|  | unregister_sysctl_table(hv_ctl_table_hdr); | 
|  | hv_ctl_table_hdr = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * __vmbus_child_driver_register() - Register a vmbus's driver | 
|  | * @hv_driver: Pointer to driver structure you want to register | 
|  | * @owner: owner module of the drv | 
|  | * @mod_name: module name string | 
|  | * | 
|  | * Registers the given driver with Linux through the 'driver_register()' call | 
|  | * and sets up the hyper-v vmbus handling for this driver. | 
|  | * It will return the state of the 'driver_register()' call. | 
|  | * | 
|  | */ | 
|  | int __vmbus_driver_register(struct hv_driver *hv_driver, struct module *owner, const char *mod_name) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | pr_info("registering driver %s\n", hv_driver->name); | 
|  |  | 
|  | ret = vmbus_exists(); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | hv_driver->driver.name = hv_driver->name; | 
|  | hv_driver->driver.owner = owner; | 
|  | hv_driver->driver.mod_name = mod_name; | 
|  | hv_driver->driver.bus = &hv_bus; | 
|  |  | 
|  | spin_lock_init(&hv_driver->dynids.lock); | 
|  | INIT_LIST_HEAD(&hv_driver->dynids.list); | 
|  |  | 
|  | ret = driver_register(&hv_driver->driver); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(__vmbus_driver_register); | 
|  |  | 
|  | /** | 
|  | * vmbus_driver_unregister() - Unregister a vmbus's driver | 
|  | * @hv_driver: Pointer to driver structure you want to | 
|  | *             un-register | 
|  | * | 
|  | * Un-register the given driver that was previous registered with a call to | 
|  | * vmbus_driver_register() | 
|  | */ | 
|  | void vmbus_driver_unregister(struct hv_driver *hv_driver) | 
|  | { | 
|  | pr_info("unregistering driver %s\n", hv_driver->name); | 
|  |  | 
|  | if (!vmbus_exists()) { | 
|  | driver_unregister(&hv_driver->driver); | 
|  | vmbus_free_dynids(hv_driver); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vmbus_driver_unregister); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Called when last reference to channel is gone. | 
|  | */ | 
|  | static void vmbus_chan_release(struct kobject *kobj) | 
|  | { | 
|  | struct vmbus_channel *channel | 
|  | = container_of(kobj, struct vmbus_channel, kobj); | 
|  |  | 
|  | kfree_rcu(channel, rcu); | 
|  | } | 
|  |  | 
|  | struct vmbus_chan_attribute { | 
|  | struct attribute attr; | 
|  | ssize_t (*show)(struct vmbus_channel *chan, char *buf); | 
|  | ssize_t (*store)(struct vmbus_channel *chan, | 
|  | const char *buf, size_t count); | 
|  | }; | 
|  | #define VMBUS_CHAN_ATTR(_name, _mode, _show, _store) \ | 
|  | struct vmbus_chan_attribute chan_attr_##_name \ | 
|  | = __ATTR(_name, _mode, _show, _store) | 
|  | #define VMBUS_CHAN_ATTR_RW(_name) \ | 
|  | struct vmbus_chan_attribute chan_attr_##_name = __ATTR_RW(_name) | 
|  | #define VMBUS_CHAN_ATTR_RO(_name) \ | 
|  | struct vmbus_chan_attribute chan_attr_##_name = __ATTR_RO(_name) | 
|  | #define VMBUS_CHAN_ATTR_WO(_name) \ | 
|  | struct vmbus_chan_attribute chan_attr_##_name = __ATTR_WO(_name) | 
|  |  | 
|  | static ssize_t vmbus_chan_attr_show(struct kobject *kobj, | 
|  | struct attribute *attr, char *buf) | 
|  | { | 
|  | const struct vmbus_chan_attribute *attribute | 
|  | = container_of(attr, struct vmbus_chan_attribute, attr); | 
|  | struct vmbus_channel *chan | 
|  | = container_of(kobj, struct vmbus_channel, kobj); | 
|  |  | 
|  | if (!attribute->show) | 
|  | return -EIO; | 
|  |  | 
|  | return attribute->show(chan, buf); | 
|  | } | 
|  |  | 
|  | static const struct sysfs_ops vmbus_chan_sysfs_ops = { | 
|  | .show = vmbus_chan_attr_show, | 
|  | }; | 
|  |  | 
|  | static ssize_t out_mask_show(struct vmbus_channel *channel, char *buf) | 
|  | { | 
|  | struct hv_ring_buffer_info *rbi = &channel->outbound; | 
|  | ssize_t ret; | 
|  |  | 
|  | mutex_lock(&rbi->ring_buffer_mutex); | 
|  | if (!rbi->ring_buffer) { | 
|  | mutex_unlock(&rbi->ring_buffer_mutex); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask); | 
|  | mutex_unlock(&rbi->ring_buffer_mutex); | 
|  | return ret; | 
|  | } | 
|  | static VMBUS_CHAN_ATTR_RO(out_mask); | 
|  |  | 
|  | static ssize_t in_mask_show(struct vmbus_channel *channel, char *buf) | 
|  | { | 
|  | struct hv_ring_buffer_info *rbi = &channel->inbound; | 
|  | ssize_t ret; | 
|  |  | 
|  | mutex_lock(&rbi->ring_buffer_mutex); | 
|  | if (!rbi->ring_buffer) { | 
|  | mutex_unlock(&rbi->ring_buffer_mutex); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask); | 
|  | mutex_unlock(&rbi->ring_buffer_mutex); | 
|  | return ret; | 
|  | } | 
|  | static VMBUS_CHAN_ATTR_RO(in_mask); | 
|  |  | 
|  | static ssize_t read_avail_show(struct vmbus_channel *channel, char *buf) | 
|  | { | 
|  | struct hv_ring_buffer_info *rbi = &channel->inbound; | 
|  | ssize_t ret; | 
|  |  | 
|  | mutex_lock(&rbi->ring_buffer_mutex); | 
|  | if (!rbi->ring_buffer) { | 
|  | mutex_unlock(&rbi->ring_buffer_mutex); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = sprintf(buf, "%u\n", hv_get_bytes_to_read(rbi)); | 
|  | mutex_unlock(&rbi->ring_buffer_mutex); | 
|  | return ret; | 
|  | } | 
|  | static VMBUS_CHAN_ATTR_RO(read_avail); | 
|  |  | 
|  | static ssize_t write_avail_show(struct vmbus_channel *channel, char *buf) | 
|  | { | 
|  | struct hv_ring_buffer_info *rbi = &channel->outbound; | 
|  | ssize_t ret; | 
|  |  | 
|  | mutex_lock(&rbi->ring_buffer_mutex); | 
|  | if (!rbi->ring_buffer) { | 
|  | mutex_unlock(&rbi->ring_buffer_mutex); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = sprintf(buf, "%u\n", hv_get_bytes_to_write(rbi)); | 
|  | mutex_unlock(&rbi->ring_buffer_mutex); | 
|  | return ret; | 
|  | } | 
|  | static VMBUS_CHAN_ATTR_RO(write_avail); | 
|  |  | 
|  | static ssize_t show_target_cpu(struct vmbus_channel *channel, char *buf) | 
|  | { | 
|  | return sprintf(buf, "%u\n", channel->target_cpu); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(cpu, S_IRUGO, show_target_cpu, NULL); | 
|  |  | 
|  | static ssize_t channel_pending_show(struct vmbus_channel *channel, | 
|  | char *buf) | 
|  | { | 
|  | return sprintf(buf, "%d\n", | 
|  | channel_pending(channel, | 
|  | vmbus_connection.monitor_pages[1])); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(pending, S_IRUGO, channel_pending_show, NULL); | 
|  |  | 
|  | static ssize_t channel_latency_show(struct vmbus_channel *channel, | 
|  | char *buf) | 
|  | { | 
|  | return sprintf(buf, "%d\n", | 
|  | channel_latency(channel, | 
|  | vmbus_connection.monitor_pages[1])); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(latency, S_IRUGO, channel_latency_show, NULL); | 
|  |  | 
|  | static ssize_t channel_interrupts_show(struct vmbus_channel *channel, char *buf) | 
|  | { | 
|  | return sprintf(buf, "%llu\n", channel->interrupts); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(interrupts, S_IRUGO, channel_interrupts_show, NULL); | 
|  |  | 
|  | static ssize_t channel_events_show(struct vmbus_channel *channel, char *buf) | 
|  | { | 
|  | return sprintf(buf, "%llu\n", channel->sig_events); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(events, S_IRUGO, channel_events_show, NULL); | 
|  |  | 
|  | static ssize_t channel_intr_in_full_show(struct vmbus_channel *channel, | 
|  | char *buf) | 
|  | { | 
|  | return sprintf(buf, "%llu\n", | 
|  | (unsigned long long)channel->intr_in_full); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(intr_in_full, 0444, channel_intr_in_full_show, NULL); | 
|  |  | 
|  | static ssize_t channel_intr_out_empty_show(struct vmbus_channel *channel, | 
|  | char *buf) | 
|  | { | 
|  | return sprintf(buf, "%llu\n", | 
|  | (unsigned long long)channel->intr_out_empty); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(intr_out_empty, 0444, channel_intr_out_empty_show, NULL); | 
|  |  | 
|  | static ssize_t channel_out_full_first_show(struct vmbus_channel *channel, | 
|  | char *buf) | 
|  | { | 
|  | return sprintf(buf, "%llu\n", | 
|  | (unsigned long long)channel->out_full_first); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(out_full_first, 0444, channel_out_full_first_show, NULL); | 
|  |  | 
|  | static ssize_t channel_out_full_total_show(struct vmbus_channel *channel, | 
|  | char *buf) | 
|  | { | 
|  | return sprintf(buf, "%llu\n", | 
|  | (unsigned long long)channel->out_full_total); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(out_full_total, 0444, channel_out_full_total_show, NULL); | 
|  |  | 
|  | static ssize_t subchannel_monitor_id_show(struct vmbus_channel *channel, | 
|  | char *buf) | 
|  | { | 
|  | return sprintf(buf, "%u\n", channel->offermsg.monitorid); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR(monitor_id, S_IRUGO, subchannel_monitor_id_show, NULL); | 
|  |  | 
|  | static ssize_t subchannel_id_show(struct vmbus_channel *channel, | 
|  | char *buf) | 
|  | { | 
|  | return sprintf(buf, "%u\n", | 
|  | channel->offermsg.offer.sub_channel_index); | 
|  | } | 
|  | static VMBUS_CHAN_ATTR_RO(subchannel_id); | 
|  |  | 
|  | static struct attribute *vmbus_chan_attrs[] = { | 
|  | &chan_attr_out_mask.attr, | 
|  | &chan_attr_in_mask.attr, | 
|  | &chan_attr_read_avail.attr, | 
|  | &chan_attr_write_avail.attr, | 
|  | &chan_attr_cpu.attr, | 
|  | &chan_attr_pending.attr, | 
|  | &chan_attr_latency.attr, | 
|  | &chan_attr_interrupts.attr, | 
|  | &chan_attr_events.attr, | 
|  | &chan_attr_intr_in_full.attr, | 
|  | &chan_attr_intr_out_empty.attr, | 
|  | &chan_attr_out_full_first.attr, | 
|  | &chan_attr_out_full_total.attr, | 
|  | &chan_attr_monitor_id.attr, | 
|  | &chan_attr_subchannel_id.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Channel-level attribute_group callback function. Returns the permission for | 
|  | * each attribute, and returns 0 if an attribute is not visible. | 
|  | */ | 
|  | static umode_t vmbus_chan_attr_is_visible(struct kobject *kobj, | 
|  | struct attribute *attr, int idx) | 
|  | { | 
|  | const struct vmbus_channel *channel = | 
|  | container_of(kobj, struct vmbus_channel, kobj); | 
|  |  | 
|  | /* Hide the monitor attributes if the monitor mechanism is not used. */ | 
|  | if (!channel->offermsg.monitor_allocated && | 
|  | (attr == &chan_attr_pending.attr || | 
|  | attr == &chan_attr_latency.attr || | 
|  | attr == &chan_attr_monitor_id.attr)) | 
|  | return 0; | 
|  |  | 
|  | return attr->mode; | 
|  | } | 
|  |  | 
|  | static struct attribute_group vmbus_chan_group = { | 
|  | .attrs = vmbus_chan_attrs, | 
|  | .is_visible = vmbus_chan_attr_is_visible | 
|  | }; | 
|  |  | 
|  | static struct kobj_type vmbus_chan_ktype = { | 
|  | .sysfs_ops = &vmbus_chan_sysfs_ops, | 
|  | .release = vmbus_chan_release, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * vmbus_add_channel_kobj - setup a sub-directory under device/channels | 
|  | */ | 
|  | int vmbus_add_channel_kobj(struct hv_device *dev, struct vmbus_channel *channel) | 
|  | { | 
|  | const struct device *device = &dev->device; | 
|  | struct kobject *kobj = &channel->kobj; | 
|  | u32 relid = channel->offermsg.child_relid; | 
|  | int ret; | 
|  |  | 
|  | kobj->kset = dev->channels_kset; | 
|  | ret = kobject_init_and_add(kobj, &vmbus_chan_ktype, NULL, | 
|  | "%u", relid); | 
|  | if (ret) { | 
|  | kobject_put(kobj); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = sysfs_create_group(kobj, &vmbus_chan_group); | 
|  |  | 
|  | if (ret) { | 
|  | /* | 
|  | * The calling functions' error handling paths will cleanup the | 
|  | * empty channel directory. | 
|  | */ | 
|  | kobject_put(kobj); | 
|  | dev_err(device, "Unable to set up channel sysfs files\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | kobject_uevent(kobj, KOBJ_ADD); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vmbus_remove_channel_attr_group - remove the channel's attribute group | 
|  | */ | 
|  | void vmbus_remove_channel_attr_group(struct vmbus_channel *channel) | 
|  | { | 
|  | sysfs_remove_group(&channel->kobj, &vmbus_chan_group); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vmbus_device_create - Creates and registers a new child device | 
|  | * on the vmbus. | 
|  | */ | 
|  | struct hv_device *vmbus_device_create(const guid_t *type, | 
|  | const guid_t *instance, | 
|  | struct vmbus_channel *channel) | 
|  | { | 
|  | struct hv_device *child_device_obj; | 
|  |  | 
|  | child_device_obj = kzalloc(sizeof(struct hv_device), GFP_KERNEL); | 
|  | if (!child_device_obj) { | 
|  | pr_err("Unable to allocate device object for child device\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | child_device_obj->channel = channel; | 
|  | guid_copy(&child_device_obj->dev_type, type); | 
|  | guid_copy(&child_device_obj->dev_instance, instance); | 
|  | child_device_obj->vendor_id = 0x1414; /* MSFT vendor ID */ | 
|  |  | 
|  | return child_device_obj; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vmbus_device_register - Register the child device | 
|  | */ | 
|  | int vmbus_device_register(struct hv_device *child_device_obj) | 
|  | { | 
|  | struct kobject *kobj = &child_device_obj->device.kobj; | 
|  | int ret; | 
|  |  | 
|  | dev_set_name(&child_device_obj->device, "%pUl", | 
|  | child_device_obj->channel->offermsg.offer.if_instance.b); | 
|  |  | 
|  | child_device_obj->device.bus = &hv_bus; | 
|  | child_device_obj->device.parent = &hv_acpi_dev->dev; | 
|  | child_device_obj->device.release = vmbus_device_release; | 
|  |  | 
|  | /* | 
|  | * Register with the LDM. This will kick off the driver/device | 
|  | * binding...which will eventually call vmbus_match() and vmbus_probe() | 
|  | */ | 
|  | ret = device_register(&child_device_obj->device); | 
|  | if (ret) { | 
|  | pr_err("Unable to register child device\n"); | 
|  | put_device(&child_device_obj->device); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | child_device_obj->channels_kset = kset_create_and_add("channels", | 
|  | NULL, kobj); | 
|  | if (!child_device_obj->channels_kset) { | 
|  | ret = -ENOMEM; | 
|  | goto err_dev_unregister; | 
|  | } | 
|  |  | 
|  | ret = vmbus_add_channel_kobj(child_device_obj, | 
|  | child_device_obj->channel); | 
|  | if (ret) { | 
|  | pr_err("Unable to register primary channeln"); | 
|  | goto err_kset_unregister; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_kset_unregister: | 
|  | kset_unregister(child_device_obj->channels_kset); | 
|  |  | 
|  | err_dev_unregister: | 
|  | device_unregister(&child_device_obj->device); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * vmbus_device_unregister - Remove the specified child device | 
|  | * from the vmbus. | 
|  | */ | 
|  | void vmbus_device_unregister(struct hv_device *device_obj) | 
|  | { | 
|  | pr_debug("child device %s unregistered\n", | 
|  | dev_name(&device_obj->device)); | 
|  |  | 
|  | kset_unregister(device_obj->channels_kset); | 
|  |  | 
|  | /* | 
|  | * Kick off the process of unregistering the device. | 
|  | * This will call vmbus_remove() and eventually vmbus_device_release() | 
|  | */ | 
|  | device_unregister(&device_obj->device); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vmbus_device_unregister); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * VMBUS is an acpi enumerated device. Get the information we | 
|  | * need from DSDT. | 
|  | */ | 
|  | #define VTPM_BASE_ADDRESS 0xfed40000 | 
|  | static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx) | 
|  | { | 
|  | resource_size_t start = 0; | 
|  | resource_size_t end = 0; | 
|  | struct resource *new_res; | 
|  | struct resource **old_res = &hyperv_mmio; | 
|  | struct resource **prev_res = NULL; | 
|  |  | 
|  | switch (res->type) { | 
|  |  | 
|  | /* | 
|  | * "Address" descriptors are for bus windows. Ignore | 
|  | * "memory" descriptors, which are for registers on | 
|  | * devices. | 
|  | */ | 
|  | case ACPI_RESOURCE_TYPE_ADDRESS32: | 
|  | start = res->data.address32.address.minimum; | 
|  | end = res->data.address32.address.maximum; | 
|  | break; | 
|  |  | 
|  | case ACPI_RESOURCE_TYPE_ADDRESS64: | 
|  | start = res->data.address64.address.minimum; | 
|  | end = res->data.address64.address.maximum; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | /* Unused resource type */ | 
|  | return AE_OK; | 
|  |  | 
|  | } | 
|  | /* | 
|  | * Ignore ranges that are below 1MB, as they're not | 
|  | * necessary or useful here. | 
|  | */ | 
|  | if (end < 0x100000) | 
|  | return AE_OK; | 
|  |  | 
|  | new_res = kzalloc(sizeof(*new_res), GFP_ATOMIC); | 
|  | if (!new_res) | 
|  | return AE_NO_MEMORY; | 
|  |  | 
|  | /* If this range overlaps the virtual TPM, truncate it. */ | 
|  | if (end > VTPM_BASE_ADDRESS && start < VTPM_BASE_ADDRESS) | 
|  | end = VTPM_BASE_ADDRESS; | 
|  |  | 
|  | new_res->name = "hyperv mmio"; | 
|  | new_res->flags = IORESOURCE_MEM; | 
|  | new_res->start = start; | 
|  | new_res->end = end; | 
|  |  | 
|  | /* | 
|  | * If two ranges are adjacent, merge them. | 
|  | */ | 
|  | do { | 
|  | if (!*old_res) { | 
|  | *old_res = new_res; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (((*old_res)->end + 1) == new_res->start) { | 
|  | (*old_res)->end = new_res->end; | 
|  | kfree(new_res); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if ((*old_res)->start == new_res->end + 1) { | 
|  | (*old_res)->start = new_res->start; | 
|  | kfree(new_res); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if ((*old_res)->start > new_res->end) { | 
|  | new_res->sibling = *old_res; | 
|  | if (prev_res) | 
|  | (*prev_res)->sibling = new_res; | 
|  | *old_res = new_res; | 
|  | break; | 
|  | } | 
|  |  | 
|  | prev_res = old_res; | 
|  | old_res = &(*old_res)->sibling; | 
|  |  | 
|  | } while (1); | 
|  |  | 
|  | return AE_OK; | 
|  | } | 
|  |  | 
|  | static int vmbus_acpi_remove(struct acpi_device *device) | 
|  | { | 
|  | struct resource *cur_res; | 
|  | struct resource *next_res; | 
|  |  | 
|  | if (hyperv_mmio) { | 
|  | if (fb_mmio) { | 
|  | __release_region(hyperv_mmio, fb_mmio->start, | 
|  | resource_size(fb_mmio)); | 
|  | fb_mmio = NULL; | 
|  | } | 
|  |  | 
|  | for (cur_res = hyperv_mmio; cur_res; cur_res = next_res) { | 
|  | next_res = cur_res->sibling; | 
|  | kfree(cur_res); | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void vmbus_reserve_fb(void) | 
|  | { | 
|  | int size; | 
|  | /* | 
|  | * Make a claim for the frame buffer in the resource tree under the | 
|  | * first node, which will be the one below 4GB.  The length seems to | 
|  | * be underreported, particularly in a Generation 1 VM.  So start out | 
|  | * reserving a larger area and make it smaller until it succeeds. | 
|  | */ | 
|  |  | 
|  | if (screen_info.lfb_base) { | 
|  | if (efi_enabled(EFI_BOOT)) | 
|  | size = max_t(__u32, screen_info.lfb_size, 0x800000); | 
|  | else | 
|  | size = max_t(__u32, screen_info.lfb_size, 0x4000000); | 
|  |  | 
|  | for (; !fb_mmio && (size >= 0x100000); size >>= 1) { | 
|  | fb_mmio = __request_region(hyperv_mmio, | 
|  | screen_info.lfb_base, size, | 
|  | fb_mmio_name, 0); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * vmbus_allocate_mmio() - Pick a memory-mapped I/O range. | 
|  | * @new:		If successful, supplied a pointer to the | 
|  | *			allocated MMIO space. | 
|  | * @device_obj:		Identifies the caller | 
|  | * @min:		Minimum guest physical address of the | 
|  | *			allocation | 
|  | * @max:		Maximum guest physical address | 
|  | * @size:		Size of the range to be allocated | 
|  | * @align:		Alignment of the range to be allocated | 
|  | * @fb_overlap_ok:	Whether this allocation can be allowed | 
|  | *			to overlap the video frame buffer. | 
|  | * | 
|  | * This function walks the resources granted to VMBus by the | 
|  | * _CRS object in the ACPI namespace underneath the parent | 
|  | * "bridge" whether that's a root PCI bus in the Generation 1 | 
|  | * case or a Module Device in the Generation 2 case.  It then | 
|  | * attempts to allocate from the global MMIO pool in a way that | 
|  | * matches the constraints supplied in these parameters and by | 
|  | * that _CRS. | 
|  | * | 
|  | * Return: 0 on success, -errno on failure | 
|  | */ | 
|  | int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, | 
|  | resource_size_t min, resource_size_t max, | 
|  | resource_size_t size, resource_size_t align, | 
|  | bool fb_overlap_ok) | 
|  | { | 
|  | struct resource *iter, *shadow; | 
|  | resource_size_t range_min, range_max, start, end; | 
|  | const char *dev_n = dev_name(&device_obj->device); | 
|  | int retval; | 
|  |  | 
|  | retval = -ENXIO; | 
|  | mutex_lock(&hyperv_mmio_lock); | 
|  |  | 
|  | /* | 
|  | * If overlaps with frame buffers are allowed, then first attempt to | 
|  | * make the allocation from within the reserved region.  Because it | 
|  | * is already reserved, no shadow allocation is necessary. | 
|  | */ | 
|  | if (fb_overlap_ok && fb_mmio && !(min > fb_mmio->end) && | 
|  | !(max < fb_mmio->start)) { | 
|  |  | 
|  | range_min = fb_mmio->start; | 
|  | range_max = fb_mmio->end; | 
|  | start = (range_min + align - 1) & ~(align - 1); | 
|  | for (; start + size - 1 <= range_max; start += align) { | 
|  | *new = request_mem_region_exclusive(start, size, dev_n); | 
|  | if (*new) { | 
|  | retval = 0; | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | for (iter = hyperv_mmio; iter; iter = iter->sibling) { | 
|  | if ((iter->start >= max) || (iter->end <= min)) | 
|  | continue; | 
|  |  | 
|  | range_min = iter->start; | 
|  | range_max = iter->end; | 
|  | start = (range_min + align - 1) & ~(align - 1); | 
|  | for (; start + size - 1 <= range_max; start += align) { | 
|  | end = start + size - 1; | 
|  |  | 
|  | /* Skip the whole fb_mmio region if not fb_overlap_ok */ | 
|  | if (!fb_overlap_ok && fb_mmio && | 
|  | (((start >= fb_mmio->start) && (start <= fb_mmio->end)) || | 
|  | ((end >= fb_mmio->start) && (end <= fb_mmio->end)))) | 
|  | continue; | 
|  |  | 
|  | shadow = __request_region(iter, start, size, NULL, | 
|  | IORESOURCE_BUSY); | 
|  | if (!shadow) | 
|  | continue; | 
|  |  | 
|  | *new = request_mem_region_exclusive(start, size, dev_n); | 
|  | if (*new) { | 
|  | shadow->name = (char *)*new; | 
|  | retval = 0; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | __release_region(iter, start, size); | 
|  | } | 
|  | } | 
|  |  | 
|  | exit: | 
|  | mutex_unlock(&hyperv_mmio_lock); | 
|  | return retval; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vmbus_allocate_mmio); | 
|  |  | 
|  | /** | 
|  | * vmbus_free_mmio() - Free a memory-mapped I/O range. | 
|  | * @start:		Base address of region to release. | 
|  | * @size:		Size of the range to be allocated | 
|  | * | 
|  | * This function releases anything requested by | 
|  | * vmbus_mmio_allocate(). | 
|  | */ | 
|  | void vmbus_free_mmio(resource_size_t start, resource_size_t size) | 
|  | { | 
|  | struct resource *iter; | 
|  |  | 
|  | mutex_lock(&hyperv_mmio_lock); | 
|  |  | 
|  | /* | 
|  | * If all bytes of the MMIO range to be released are within the | 
|  | * special case fb_mmio shadow region, skip releasing the shadow | 
|  | * region since no corresponding __request_region() was done | 
|  | * in vmbus_allocate_mmio(). | 
|  | */ | 
|  | if (fb_mmio && start >= fb_mmio->start && | 
|  | (start + size - 1 <= fb_mmio->end)) | 
|  | goto skip_shadow_release; | 
|  |  | 
|  | for (iter = hyperv_mmio; iter; iter = iter->sibling) { | 
|  | if ((iter->start >= start + size) || (iter->end <= start)) | 
|  | continue; | 
|  |  | 
|  | __release_region(iter, start, size); | 
|  | } | 
|  |  | 
|  | skip_shadow_release: | 
|  | release_mem_region(start, size); | 
|  | mutex_unlock(&hyperv_mmio_lock); | 
|  |  | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(vmbus_free_mmio); | 
|  |  | 
|  | static int vmbus_acpi_add(struct acpi_device *device) | 
|  | { | 
|  | acpi_status result; | 
|  | int ret_val = -ENODEV; | 
|  | struct acpi_device *ancestor; | 
|  |  | 
|  | hv_acpi_dev = device; | 
|  |  | 
|  | result = acpi_walk_resources(device->handle, METHOD_NAME__CRS, | 
|  | vmbus_walk_resources, NULL); | 
|  |  | 
|  | if (ACPI_FAILURE(result)) | 
|  | goto acpi_walk_err; | 
|  | /* | 
|  | * Some ancestor of the vmbus acpi device (Gen1 or Gen2 | 
|  | * firmware) is the VMOD that has the mmio ranges. Get that. | 
|  | */ | 
|  | for (ancestor = device->parent; ancestor; ancestor = ancestor->parent) { | 
|  | result = acpi_walk_resources(ancestor->handle, METHOD_NAME__CRS, | 
|  | vmbus_walk_resources, NULL); | 
|  |  | 
|  | if (ACPI_FAILURE(result)) | 
|  | continue; | 
|  | if (hyperv_mmio) { | 
|  | vmbus_reserve_fb(); | 
|  | break; | 
|  | } | 
|  | } | 
|  | ret_val = 0; | 
|  |  | 
|  | acpi_walk_err: | 
|  | complete(&probe_event); | 
|  | if (ret_val) | 
|  | vmbus_acpi_remove(device); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int vmbus_bus_suspend(struct device *dev) | 
|  | { | 
|  | struct vmbus_channel *channel, *sc; | 
|  | unsigned long flags; | 
|  |  | 
|  | while (atomic_read(&vmbus_connection.offer_in_progress) != 0) { | 
|  | /* | 
|  | * We wait here until the completion of any channel | 
|  | * offers that are currently in progress. | 
|  | */ | 
|  | msleep(1); | 
|  | } | 
|  |  | 
|  | mutex_lock(&vmbus_connection.channel_mutex); | 
|  | list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) { | 
|  | if (!is_hvsock_channel(channel)) | 
|  | continue; | 
|  |  | 
|  | vmbus_force_channel_rescinded(channel); | 
|  | } | 
|  | mutex_unlock(&vmbus_connection.channel_mutex); | 
|  |  | 
|  | /* | 
|  | * Wait until all the sub-channels and hv_sock channels have been | 
|  | * cleaned up. Sub-channels should be destroyed upon suspend, otherwise | 
|  | * they would conflict with the new sub-channels that will be created | 
|  | * in the resume path. hv_sock channels should also be destroyed, but | 
|  | * a hv_sock channel of an established hv_sock connection can not be | 
|  | * really destroyed since it may still be referenced by the userspace | 
|  | * application, so we just force the hv_sock channel to be rescinded | 
|  | * by vmbus_force_channel_rescinded(), and the userspace application | 
|  | * will thoroughly destroy the channel after hibernation. | 
|  | * | 
|  | * Note: the counter nr_chan_close_on_suspend may never go above 0 if | 
|  | * the VM has no sub-channel and hv_sock channel, e.g. a 1-vCPU VM. | 
|  | */ | 
|  | if (atomic_read(&vmbus_connection.nr_chan_close_on_suspend) > 0) | 
|  | wait_for_completion(&vmbus_connection.ready_for_suspend_event); | 
|  |  | 
|  | if (atomic_read(&vmbus_connection.nr_chan_fixup_on_resume) != 0) { | 
|  | pr_err("Can not suspend due to a previous failed resuming\n"); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | mutex_lock(&vmbus_connection.channel_mutex); | 
|  |  | 
|  | list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) { | 
|  | /* | 
|  | * Invalidate the field. Upon resume, vmbus_onoffer() will fix | 
|  | * up the field, and the other fields (if necessary). | 
|  | */ | 
|  | channel->offermsg.child_relid = INVALID_RELID; | 
|  |  | 
|  | if (is_hvsock_channel(channel)) { | 
|  | if (!channel->rescind) { | 
|  | pr_err("hv_sock channel not rescinded!\n"); | 
|  | WARN_ON_ONCE(1); | 
|  | } | 
|  | continue; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&channel->lock, flags); | 
|  | list_for_each_entry(sc, &channel->sc_list, sc_list) { | 
|  | pr_err("Sub-channel not deleted!\n"); | 
|  | WARN_ON_ONCE(1); | 
|  | } | 
|  | spin_unlock_irqrestore(&channel->lock, flags); | 
|  |  | 
|  | atomic_inc(&vmbus_connection.nr_chan_fixup_on_resume); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&vmbus_connection.channel_mutex); | 
|  |  | 
|  | vmbus_initiate_unload(false); | 
|  |  | 
|  | /* Reset the event for the next resume. */ | 
|  | reinit_completion(&vmbus_connection.ready_for_resume_event); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int vmbus_bus_resume(struct device *dev) | 
|  | { | 
|  | struct vmbus_channel_msginfo *msginfo; | 
|  | size_t msgsize; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * We only use the 'vmbus_proto_version', which was in use before | 
|  | * hibernation, to re-negotiate with the host. | 
|  | */ | 
|  | if (vmbus_proto_version == VERSION_INVAL || | 
|  | vmbus_proto_version == 0) { | 
|  | pr_err("Invalid proto version = 0x%x\n", vmbus_proto_version); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | msgsize = sizeof(*msginfo) + | 
|  | sizeof(struct vmbus_channel_initiate_contact); | 
|  |  | 
|  | msginfo = kzalloc(msgsize, GFP_KERNEL); | 
|  |  | 
|  | if (msginfo == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = vmbus_negotiate_version(msginfo, vmbus_proto_version); | 
|  |  | 
|  | kfree(msginfo); | 
|  |  | 
|  | if (ret != 0) | 
|  | return ret; | 
|  |  | 
|  | WARN_ON(atomic_read(&vmbus_connection.nr_chan_fixup_on_resume) == 0); | 
|  |  | 
|  | vmbus_request_offers(); | 
|  |  | 
|  | if (wait_for_completion_timeout( | 
|  | &vmbus_connection.ready_for_resume_event, 10 * HZ) == 0) | 
|  | pr_err("Some vmbus device is missing after suspending?\n"); | 
|  |  | 
|  | /* Reset the event for the next suspend. */ | 
|  | reinit_completion(&vmbus_connection.ready_for_suspend_event); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define vmbus_bus_suspend NULL | 
|  | #define vmbus_bus_resume NULL | 
|  | #endif /* CONFIG_PM_SLEEP */ | 
|  |  | 
|  | static const struct acpi_device_id vmbus_acpi_device_ids[] = { | 
|  | {"VMBUS", 0}, | 
|  | {"VMBus", 0}, | 
|  | {"", 0}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(acpi, vmbus_acpi_device_ids); | 
|  |  | 
|  | /* | 
|  | * Note: we must use the "no_irq" ops, otherwise hibernation can not work with | 
|  | * PCI device assignment, because "pci_dev_pm_ops" uses the "noirq" ops: in | 
|  | * the resume path, the pci "noirq" restore op runs before "non-noirq" op (see | 
|  | * resume_target_kernel() -> dpm_resume_start(), and hibernation_restore() -> | 
|  | * dpm_resume_end()). This means vmbus_bus_resume() and the pci-hyperv's | 
|  | * resume callback must also run via the "noirq" ops. | 
|  | * | 
|  | * Set suspend_noirq/resume_noirq to NULL for Suspend-to-Idle: see the comment | 
|  | * earlier in this file before vmbus_pm. | 
|  | */ | 
|  |  | 
|  | static const struct dev_pm_ops vmbus_bus_pm = { | 
|  | .suspend_noirq	= NULL, | 
|  | .resume_noirq	= NULL, | 
|  | .freeze_noirq	= vmbus_bus_suspend, | 
|  | .thaw_noirq	= vmbus_bus_resume, | 
|  | .poweroff_noirq	= vmbus_bus_suspend, | 
|  | .restore_noirq	= vmbus_bus_resume | 
|  | }; | 
|  |  | 
|  | static struct acpi_driver vmbus_acpi_driver = { | 
|  | .name = "vmbus", | 
|  | .ids = vmbus_acpi_device_ids, | 
|  | .ops = { | 
|  | .add = vmbus_acpi_add, | 
|  | .remove = vmbus_acpi_remove, | 
|  | }, | 
|  | .drv.pm = &vmbus_bus_pm, | 
|  | }; | 
|  |  | 
|  | static void hv_kexec_handler(void) | 
|  | { | 
|  | hv_stimer_global_cleanup(); | 
|  | vmbus_initiate_unload(false); | 
|  | /* Make sure conn_state is set as hv_synic_cleanup checks for it */ | 
|  | mb(); | 
|  | cpuhp_remove_state(hyperv_cpuhp_online); | 
|  | hyperv_cleanup(); | 
|  | }; | 
|  |  | 
|  | static void hv_crash_handler(struct pt_regs *regs) | 
|  | { | 
|  | int cpu; | 
|  |  | 
|  | vmbus_initiate_unload(true); | 
|  | /* | 
|  | * In crash handler we can't schedule synic cleanup for all CPUs, | 
|  | * doing the cleanup for current CPU only. This should be sufficient | 
|  | * for kdump. | 
|  | */ | 
|  | cpu = smp_processor_id(); | 
|  | hv_stimer_cleanup(cpu); | 
|  | hv_synic_disable_regs(cpu); | 
|  | hyperv_cleanup(); | 
|  | }; | 
|  |  | 
|  | static int hv_synic_suspend(void) | 
|  | { | 
|  | /* | 
|  | * When we reach here, all the non-boot CPUs have been offlined, and | 
|  | * the stimers on them have been unbound in hv_synic_cleanup() -> | 
|  | * hv_stimer_cleanup() -> clockevents_unbind_device(). | 
|  | * | 
|  | * hv_synic_suspend() only runs on CPU0 with interrupts disabled. Here | 
|  | * we do not unbind the stimer on CPU0 because: 1) it's unnecessary | 
|  | * because the interrupts remain disabled between syscore_suspend() | 
|  | * and syscore_resume(): see create_image() and resume_target_kernel(); | 
|  | * 2) the stimer on CPU0 is automatically disabled later by | 
|  | * syscore_suspend() -> timekeeping_suspend() -> tick_suspend() -> ... | 
|  | * -> clockevents_shutdown() -> ... -> hv_ce_shutdown(); 3) a warning | 
|  | * would be triggered if we call clockevents_unbind_device(), which | 
|  | * may sleep, in an interrupts-disabled context. So, we intentionally | 
|  | * don't call hv_stimer_cleanup(0) here. | 
|  | */ | 
|  |  | 
|  | hv_synic_disable_regs(0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void hv_synic_resume(void) | 
|  | { | 
|  | hv_synic_enable_regs(0); | 
|  |  | 
|  | /* | 
|  | * Note: we don't need to call hv_stimer_init(0), because the timer | 
|  | * on CPU0 is not unbound in hv_synic_suspend(), and the timer is | 
|  | * automatically re-enabled in timekeeping_resume(). | 
|  | */ | 
|  | } | 
|  |  | 
|  | /* The callbacks run only on CPU0, with irqs_disabled. */ | 
|  | static struct syscore_ops hv_synic_syscore_ops = { | 
|  | .suspend = hv_synic_suspend, | 
|  | .resume = hv_synic_resume, | 
|  | }; | 
|  |  | 
|  | static int __init hv_acpi_init(void) | 
|  | { | 
|  | int ret, t; | 
|  |  | 
|  | if (!hv_is_hyperv_initialized()) | 
|  | return -ENODEV; | 
|  |  | 
|  | init_completion(&probe_event); | 
|  |  | 
|  | /* | 
|  | * Get ACPI resources first. | 
|  | */ | 
|  | ret = acpi_bus_register_driver(&vmbus_acpi_driver); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | t = wait_for_completion_timeout(&probe_event, 5*HZ); | 
|  | if (t == 0) { | 
|  | ret = -ETIMEDOUT; | 
|  | goto cleanup; | 
|  | } | 
|  |  | 
|  | ret = vmbus_bus_init(); | 
|  | if (ret) | 
|  | goto cleanup; | 
|  |  | 
|  | hv_setup_kexec_handler(hv_kexec_handler); | 
|  | hv_setup_crash_handler(hv_crash_handler); | 
|  |  | 
|  | register_syscore_ops(&hv_synic_syscore_ops); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | cleanup: | 
|  | acpi_bus_unregister_driver(&vmbus_acpi_driver); | 
|  | hv_acpi_dev = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit vmbus_exit(void) | 
|  | { | 
|  | int cpu; | 
|  |  | 
|  | unregister_syscore_ops(&hv_synic_syscore_ops); | 
|  |  | 
|  | hv_remove_kexec_handler(); | 
|  | hv_remove_crash_handler(); | 
|  | vmbus_connection.conn_state = DISCONNECTED; | 
|  | hv_stimer_global_cleanup(); | 
|  | vmbus_disconnect(); | 
|  | hv_remove_vmbus_irq(); | 
|  | for_each_online_cpu(cpu) { | 
|  | struct hv_per_cpu_context *hv_cpu | 
|  | = per_cpu_ptr(hv_context.cpu_context, cpu); | 
|  |  | 
|  | tasklet_kill(&hv_cpu->msg_dpc); | 
|  | } | 
|  | vmbus_free_channels(); | 
|  |  | 
|  | if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) { | 
|  | kmsg_dump_unregister(&hv_kmsg_dumper); | 
|  | unregister_die_notifier(&hyperv_die_block); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The panic notifier is always registered, hence we should | 
|  | * also unconditionally unregister it here as well. | 
|  | */ | 
|  | atomic_notifier_chain_unregister(&panic_notifier_list, | 
|  | &hyperv_panic_block); | 
|  |  | 
|  | free_page((unsigned long)hv_panic_page); | 
|  | unregister_sysctl_table(hv_ctl_table_hdr); | 
|  | hv_ctl_table_hdr = NULL; | 
|  | bus_unregister(&hv_bus); | 
|  |  | 
|  | cpuhp_remove_state(hyperv_cpuhp_online); | 
|  | hv_synic_free(); | 
|  | acpi_bus_unregister_driver(&vmbus_acpi_driver); | 
|  | } | 
|  |  | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("Microsoft Hyper-V VMBus Driver"); | 
|  |  | 
|  | subsys_initcall(hv_acpi_init); | 
|  | module_exit(vmbus_exit); |