|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | *  QLogic FCoE Offload Driver | 
|  | *  Copyright (c) 2016-2018 Cavium Inc. | 
|  | */ | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/crc32.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <scsi/libfc.h> | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <scsi/fc_frame.h> | 
|  | #include <linux/if_ether.h> | 
|  | #include <linux/if_vlan.h> | 
|  | #include <linux/cpu.h> | 
|  | #include "qedf.h" | 
|  | #include "qedf_dbg.h" | 
|  | #include <uapi/linux/pci_regs.h> | 
|  |  | 
|  | const struct qed_fcoe_ops *qed_ops; | 
|  |  | 
|  | static int qedf_probe(struct pci_dev *pdev, const struct pci_device_id *id); | 
|  | static void qedf_remove(struct pci_dev *pdev); | 
|  | static void qedf_shutdown(struct pci_dev *pdev); | 
|  |  | 
|  | /* | 
|  | * Driver module parameters. | 
|  | */ | 
|  | static unsigned int qedf_dev_loss_tmo = 60; | 
|  | module_param_named(dev_loss_tmo, qedf_dev_loss_tmo, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(dev_loss_tmo,  " dev_loss_tmo setting for attached " | 
|  | "remote ports (default 60)"); | 
|  |  | 
|  | uint qedf_debug = QEDF_LOG_INFO; | 
|  | module_param_named(debug, qedf_debug, uint, S_IRUGO); | 
|  | MODULE_PARM_DESC(debug, " Debug mask. Pass '1' to enable default debugging" | 
|  | " mask"); | 
|  |  | 
|  | static uint qedf_fipvlan_retries = 60; | 
|  | module_param_named(fipvlan_retries, qedf_fipvlan_retries, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(fipvlan_retries, " Number of FIP VLAN requests to attempt " | 
|  | "before giving up (default 60)"); | 
|  |  | 
|  | static uint qedf_fallback_vlan = QEDF_FALLBACK_VLAN; | 
|  | module_param_named(fallback_vlan, qedf_fallback_vlan, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(fallback_vlan, " VLAN ID to try if fip vlan request fails " | 
|  | "(default 1002)."); | 
|  |  | 
|  | static int qedf_default_prio = -1; | 
|  | module_param_named(default_prio, qedf_default_prio, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(default_prio, " Override 802.1q priority for FIP and FCoE" | 
|  | " traffic (value between 0 and 7, default 3)."); | 
|  |  | 
|  | uint qedf_dump_frames; | 
|  | module_param_named(dump_frames, qedf_dump_frames, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(dump_frames, " Print the skb data of FIP and FCoE frames " | 
|  | "(default off)"); | 
|  |  | 
|  | static uint qedf_queue_depth; | 
|  | module_param_named(queue_depth, qedf_queue_depth, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(queue_depth, " Sets the queue depth for all LUNs discovered " | 
|  | "by the qedf driver. Default is 0 (use OS default)."); | 
|  |  | 
|  | uint qedf_io_tracing; | 
|  | module_param_named(io_tracing, qedf_io_tracing, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(io_tracing, " Enable logging of SCSI requests/completions " | 
|  | "into trace buffer. (default off)."); | 
|  |  | 
|  | static uint qedf_max_lun = MAX_FIBRE_LUNS; | 
|  | module_param_named(max_lun, qedf_max_lun, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(max_lun, " Sets the maximum luns per target that the driver " | 
|  | "supports. (default 0xffffffff)"); | 
|  |  | 
|  | uint qedf_link_down_tmo; | 
|  | module_param_named(link_down_tmo, qedf_link_down_tmo, int, S_IRUGO); | 
|  | MODULE_PARM_DESC(link_down_tmo, " Delays informing the fcoe transport that the " | 
|  | "link is down by N seconds."); | 
|  |  | 
|  | bool qedf_retry_delay; | 
|  | module_param_named(retry_delay, qedf_retry_delay, bool, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(retry_delay, " Enable/disable handling of FCP_RSP IU retry " | 
|  | "delay handling (default off)."); | 
|  |  | 
|  | static bool qedf_dcbx_no_wait; | 
|  | module_param_named(dcbx_no_wait, qedf_dcbx_no_wait, bool, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(dcbx_no_wait, " Do not wait for DCBX convergence to start " | 
|  | "sending FIP VLAN requests on link up (Default: off)."); | 
|  |  | 
|  | static uint qedf_dp_module; | 
|  | module_param_named(dp_module, qedf_dp_module, uint, S_IRUGO); | 
|  | MODULE_PARM_DESC(dp_module, " bit flags control for verbose printk passed " | 
|  | "qed module during probe."); | 
|  |  | 
|  | static uint qedf_dp_level = QED_LEVEL_NOTICE; | 
|  | module_param_named(dp_level, qedf_dp_level, uint, S_IRUGO); | 
|  | MODULE_PARM_DESC(dp_level, " printk verbosity control passed to qed module  " | 
|  | "during probe (0-3: 0 more verbose)."); | 
|  |  | 
|  | struct workqueue_struct *qedf_io_wq; | 
|  |  | 
|  | static struct fcoe_percpu_s qedf_global; | 
|  | static DEFINE_SPINLOCK(qedf_global_lock); | 
|  |  | 
|  | static struct kmem_cache *qedf_io_work_cache; | 
|  |  | 
|  | void qedf_set_vlan_id(struct qedf_ctx *qedf, int vlan_id) | 
|  | { | 
|  | int vlan_id_tmp = 0; | 
|  |  | 
|  | vlan_id_tmp = vlan_id  | (qedf->prio << VLAN_PRIO_SHIFT); | 
|  | qedf->vlan_id = vlan_id_tmp; | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "Setting vlan_id=0x%04x prio=%d.\n", | 
|  | vlan_id_tmp, qedf->prio); | 
|  | } | 
|  |  | 
|  | /* Returns true if we have a valid vlan, false otherwise */ | 
|  | static bool qedf_initiate_fipvlan_req(struct qedf_ctx *qedf) | 
|  | { | 
|  |  | 
|  | while (qedf->fipvlan_retries--) { | 
|  | /* This is to catch if link goes down during fipvlan retries */ | 
|  | if (atomic_read(&qedf->link_state) == QEDF_LINK_DOWN) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "Link not up.\n"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (test_bit(QEDF_UNLOADING, &qedf->flags)) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "Driver unloading.\n"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (qedf->vlan_id > 0) { | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "vlan = 0x%x already set, calling ctlr_link_up.\n", | 
|  | qedf->vlan_id); | 
|  | if (atomic_read(&qedf->link_state) == QEDF_LINK_UP) | 
|  | fcoe_ctlr_link_up(&qedf->ctlr); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Retry %d.\n", qedf->fipvlan_retries); | 
|  | init_completion(&qedf->fipvlan_compl); | 
|  | qedf_fcoe_send_vlan_req(qedf); | 
|  | wait_for_completion_timeout(&qedf->fipvlan_compl, 1 * HZ); | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static void qedf_handle_link_update(struct work_struct *work) | 
|  | { | 
|  | struct qedf_ctx *qedf = | 
|  | container_of(work, struct qedf_ctx, link_update.work); | 
|  | int rc; | 
|  |  | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Entered. link_state=%d.\n", | 
|  | atomic_read(&qedf->link_state)); | 
|  |  | 
|  | if (atomic_read(&qedf->link_state) == QEDF_LINK_UP) { | 
|  | rc = qedf_initiate_fipvlan_req(qedf); | 
|  | if (rc) | 
|  | return; | 
|  |  | 
|  | if (atomic_read(&qedf->link_state) != QEDF_LINK_UP) { | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "Link is down, resetting vlan_id.\n"); | 
|  | qedf->vlan_id = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we get here then we never received a repsonse to our | 
|  | * fip vlan request so set the vlan_id to the default and | 
|  | * tell FCoE that the link is up | 
|  | */ | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Did not receive FIP VLAN " | 
|  | "response, falling back to default VLAN %d.\n", | 
|  | qedf_fallback_vlan); | 
|  | qedf_set_vlan_id(qedf, qedf_fallback_vlan); | 
|  |  | 
|  | /* | 
|  | * Zero out data_src_addr so we'll update it with the new | 
|  | * lport port_id | 
|  | */ | 
|  | eth_zero_addr(qedf->data_src_addr); | 
|  | fcoe_ctlr_link_up(&qedf->ctlr); | 
|  | } else if (atomic_read(&qedf->link_state) == QEDF_LINK_DOWN) { | 
|  | /* | 
|  | * If we hit here and link_down_tmo_valid is still 1 it means | 
|  | * that link_down_tmo timed out so set it to 0 to make sure any | 
|  | * other readers have accurate state. | 
|  | */ | 
|  | atomic_set(&qedf->link_down_tmo_valid, 0); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Calling fcoe_ctlr_link_down().\n"); | 
|  | fcoe_ctlr_link_down(&qedf->ctlr); | 
|  | if (qedf_wait_for_upload(qedf) == false) | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Could not upload all sessions.\n"); | 
|  | /* Reset the number of FIP VLAN retries */ | 
|  | qedf->fipvlan_retries = qedf_fipvlan_retries; | 
|  | } | 
|  | } | 
|  |  | 
|  | #define	QEDF_FCOE_MAC_METHOD_GRANGED_MAC		1 | 
|  | #define QEDF_FCOE_MAC_METHOD_FCF_MAP			2 | 
|  | #define QEDF_FCOE_MAC_METHOD_FCOE_SET_MAC		3 | 
|  | static void qedf_set_data_src_addr(struct qedf_ctx *qedf, struct fc_frame *fp) | 
|  | { | 
|  | u8 *granted_mac; | 
|  | struct fc_frame_header *fh = fc_frame_header_get(fp); | 
|  | u8 fc_map[3]; | 
|  | int method = 0; | 
|  |  | 
|  | /* Get granted MAC address from FIP FLOGI payload */ | 
|  | granted_mac = fr_cb(fp)->granted_mac; | 
|  |  | 
|  | /* | 
|  | * We set the source MAC for FCoE traffic based on the Granted MAC | 
|  | * address from the switch. | 
|  | * | 
|  | * If granted_mac is non-zero, we used that. | 
|  | * If the granted_mac is zeroed out, created the FCoE MAC based on | 
|  | * the sel_fcf->fc_map and the d_id fo the FLOGI frame. | 
|  | * If sel_fcf->fc_map is 0 then we use the default FCF-MAC plus the | 
|  | * d_id of the FLOGI frame. | 
|  | */ | 
|  | if (!is_zero_ether_addr(granted_mac)) { | 
|  | ether_addr_copy(qedf->data_src_addr, granted_mac); | 
|  | method = QEDF_FCOE_MAC_METHOD_GRANGED_MAC; | 
|  | } else if (qedf->ctlr.sel_fcf->fc_map != 0) { | 
|  | hton24(fc_map, qedf->ctlr.sel_fcf->fc_map); | 
|  | qedf->data_src_addr[0] = fc_map[0]; | 
|  | qedf->data_src_addr[1] = fc_map[1]; | 
|  | qedf->data_src_addr[2] = fc_map[2]; | 
|  | qedf->data_src_addr[3] = fh->fh_d_id[0]; | 
|  | qedf->data_src_addr[4] = fh->fh_d_id[1]; | 
|  | qedf->data_src_addr[5] = fh->fh_d_id[2]; | 
|  | method = QEDF_FCOE_MAC_METHOD_FCF_MAP; | 
|  | } else { | 
|  | fc_fcoe_set_mac(qedf->data_src_addr, fh->fh_d_id); | 
|  | method = QEDF_FCOE_MAC_METHOD_FCOE_SET_MAC; | 
|  | } | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "QEDF data_src_mac=%pM method=%d.\n", qedf->data_src_addr, method); | 
|  | } | 
|  |  | 
|  | static void qedf_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, | 
|  | void *arg) | 
|  | { | 
|  | struct fc_exch *exch = fc_seq_exch(seq); | 
|  | struct fc_lport *lport = exch->lp; | 
|  | struct qedf_ctx *qedf = lport_priv(lport); | 
|  |  | 
|  | if (!qedf) { | 
|  | QEDF_ERR(NULL, "qedf is NULL.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If ERR_PTR is set then don't try to stat anything as it will cause | 
|  | * a crash when we access fp. | 
|  | */ | 
|  | if (IS_ERR(fp)) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_ELS, | 
|  | "fp has IS_ERR() set.\n"); | 
|  | goto skip_stat; | 
|  | } | 
|  |  | 
|  | /* Log stats for FLOGI reject */ | 
|  | if (fc_frame_payload_op(fp) == ELS_LS_RJT) | 
|  | qedf->flogi_failed++; | 
|  | else if (fc_frame_payload_op(fp) == ELS_LS_ACC) { | 
|  | /* Set the source MAC we will use for FCoE traffic */ | 
|  | qedf_set_data_src_addr(qedf, fp); | 
|  | } | 
|  |  | 
|  | /* Complete flogi_compl so we can proceed to sending ADISCs */ | 
|  | complete(&qedf->flogi_compl); | 
|  |  | 
|  | skip_stat: | 
|  | /* Report response to libfc */ | 
|  | fc_lport_flogi_resp(seq, fp, lport); | 
|  | } | 
|  |  | 
|  | static struct fc_seq *qedf_elsct_send(struct fc_lport *lport, u32 did, | 
|  | struct fc_frame *fp, unsigned int op, | 
|  | void (*resp)(struct fc_seq *, | 
|  | struct fc_frame *, | 
|  | void *), | 
|  | void *arg, u32 timeout) | 
|  | { | 
|  | struct qedf_ctx *qedf = lport_priv(lport); | 
|  |  | 
|  | /* | 
|  | * Intercept FLOGI for statistic purposes. Note we use the resp | 
|  | * callback to tell if this is really a flogi. | 
|  | */ | 
|  | if (resp == fc_lport_flogi_resp) { | 
|  | qedf->flogi_cnt++; | 
|  | return fc_elsct_send(lport, did, fp, op, qedf_flogi_resp, | 
|  | arg, timeout); | 
|  | } | 
|  |  | 
|  | return fc_elsct_send(lport, did, fp, op, resp, arg, timeout); | 
|  | } | 
|  |  | 
|  | int qedf_send_flogi(struct qedf_ctx *qedf) | 
|  | { | 
|  | struct fc_lport *lport; | 
|  | struct fc_frame *fp; | 
|  |  | 
|  | lport = qedf->lport; | 
|  |  | 
|  | if (!lport->tt.elsct_send) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "tt.elsct_send not set.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); | 
|  | if (!fp) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "fc_frame_alloc failed.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_ELS, | 
|  | "Sending FLOGI to reestablish session with switch.\n"); | 
|  | lport->tt.elsct_send(lport, FC_FID_FLOGI, fp, | 
|  | ELS_FLOGI, qedf_flogi_resp, lport, lport->r_a_tov); | 
|  |  | 
|  | init_completion(&qedf->flogi_compl); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function is called if link_down_tmo is in use.  If we get a link up and | 
|  | * link_down_tmo has not expired then use just FLOGI/ADISC to recover our | 
|  | * sessions with targets.  Otherwise, just call fcoe_ctlr_link_up(). | 
|  | */ | 
|  | static void qedf_link_recovery(struct work_struct *work) | 
|  | { | 
|  | struct qedf_ctx *qedf = | 
|  | container_of(work, struct qedf_ctx, link_recovery.work); | 
|  | struct fc_lport *lport = qedf->lport; | 
|  | struct fc_rport_priv *rdata; | 
|  | bool rc; | 
|  | int retries = 30; | 
|  | int rval, i; | 
|  | struct list_head rdata_login_list; | 
|  |  | 
|  | INIT_LIST_HEAD(&rdata_login_list); | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Link down tmo did not expire.\n"); | 
|  |  | 
|  | /* | 
|  | * Essentially reset the fcoe_ctlr here without affecting the state | 
|  | * of the libfc structs. | 
|  | */ | 
|  | qedf->ctlr.state = FIP_ST_LINK_WAIT; | 
|  | fcoe_ctlr_link_down(&qedf->ctlr); | 
|  |  | 
|  | /* | 
|  | * Bring the link up before we send the fipvlan request so libfcoe | 
|  | * can select a new fcf in parallel | 
|  | */ | 
|  | fcoe_ctlr_link_up(&qedf->ctlr); | 
|  |  | 
|  | /* Since the link when down and up to verify which vlan we're on */ | 
|  | qedf->fipvlan_retries = qedf_fipvlan_retries; | 
|  | rc = qedf_initiate_fipvlan_req(qedf); | 
|  | /* If getting the VLAN fails, set the VLAN to the fallback one */ | 
|  | if (!rc) | 
|  | qedf_set_vlan_id(qedf, qedf_fallback_vlan); | 
|  |  | 
|  | /* | 
|  | * We need to wait for an FCF to be selected due to the | 
|  | * fcoe_ctlr_link_up other the FLOGI will be rejected. | 
|  | */ | 
|  | while (retries > 0) { | 
|  | if (qedf->ctlr.sel_fcf) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "FCF reselected, proceeding with FLOGI.\n"); | 
|  | break; | 
|  | } | 
|  | msleep(500); | 
|  | retries--; | 
|  | } | 
|  |  | 
|  | if (retries < 1) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Exhausted retries waiting for " | 
|  | "FCF selection.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rval = qedf_send_flogi(qedf); | 
|  | if (rval) | 
|  | return; | 
|  |  | 
|  | /* Wait for FLOGI completion before proceeding with sending ADISCs */ | 
|  | i = wait_for_completion_timeout(&qedf->flogi_compl, | 
|  | qedf->lport->r_a_tov); | 
|  | if (i == 0) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "FLOGI timed out.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Call lport->tt.rport_login which will cause libfc to send an | 
|  | * ADISC since the rport is in state ready. | 
|  | */ | 
|  | mutex_lock(&lport->disc.disc_mutex); | 
|  | list_for_each_entry_rcu(rdata, &lport->disc.rports, peers) { | 
|  | if (kref_get_unless_zero(&rdata->kref)) { | 
|  | fc_rport_login(rdata); | 
|  | kref_put(&rdata->kref, fc_rport_destroy); | 
|  | } | 
|  | } | 
|  | mutex_unlock(&lport->disc.disc_mutex); | 
|  | } | 
|  |  | 
|  | static void qedf_update_link_speed(struct qedf_ctx *qedf, | 
|  | struct qed_link_output *link) | 
|  | { | 
|  | struct fc_lport *lport = qedf->lport; | 
|  |  | 
|  | lport->link_speed = FC_PORTSPEED_UNKNOWN; | 
|  | lport->link_supported_speeds = FC_PORTSPEED_UNKNOWN; | 
|  |  | 
|  | /* Set fc_host link speed */ | 
|  | switch (link->speed) { | 
|  | case 10000: | 
|  | lport->link_speed = FC_PORTSPEED_10GBIT; | 
|  | break; | 
|  | case 25000: | 
|  | lport->link_speed = FC_PORTSPEED_25GBIT; | 
|  | break; | 
|  | case 40000: | 
|  | lport->link_speed = FC_PORTSPEED_40GBIT; | 
|  | break; | 
|  | case 50000: | 
|  | lport->link_speed = FC_PORTSPEED_50GBIT; | 
|  | break; | 
|  | case 100000: | 
|  | lport->link_speed = FC_PORTSPEED_100GBIT; | 
|  | break; | 
|  | case 20000: | 
|  | lport->link_speed = FC_PORTSPEED_20GBIT; | 
|  | break; | 
|  | default: | 
|  | lport->link_speed = FC_PORTSPEED_UNKNOWN; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set supported link speed by querying the supported | 
|  | * capabilities of the link. | 
|  | */ | 
|  | if ((link->supported_caps & QED_LM_10000baseT_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_10000baseKX4_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_10000baseR_FEC_BIT) || | 
|  | (link->supported_caps & QED_LM_10000baseCR_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_10000baseSR_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_10000baseLR_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_10000baseLRM_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_10000baseKR_Full_BIT)) { | 
|  | lport->link_supported_speeds |= FC_PORTSPEED_10GBIT; | 
|  | } | 
|  | if ((link->supported_caps & QED_LM_25000baseKR_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_25000baseCR_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_25000baseSR_Full_BIT)) { | 
|  | lport->link_supported_speeds |= FC_PORTSPEED_25GBIT; | 
|  | } | 
|  | if ((link->supported_caps & QED_LM_40000baseLR4_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_40000baseKR4_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_40000baseCR4_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_40000baseSR4_Full_BIT)) { | 
|  | lport->link_supported_speeds |= FC_PORTSPEED_40GBIT; | 
|  | } | 
|  | if ((link->supported_caps & QED_LM_50000baseKR2_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_50000baseCR2_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_50000baseSR2_Full_BIT)) { | 
|  | lport->link_supported_speeds |= FC_PORTSPEED_50GBIT; | 
|  | } | 
|  | if ((link->supported_caps & QED_LM_100000baseKR4_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_100000baseSR4_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_100000baseCR4_Full_BIT) || | 
|  | (link->supported_caps & QED_LM_100000baseLR4_ER4_Full_BIT)) { | 
|  | lport->link_supported_speeds |= FC_PORTSPEED_100GBIT; | 
|  | } | 
|  | if (link->supported_caps & QED_LM_20000baseKR2_Full_BIT) | 
|  | lport->link_supported_speeds |= FC_PORTSPEED_20GBIT; | 
|  | fc_host_supported_speeds(lport->host) = lport->link_supported_speeds; | 
|  | } | 
|  |  | 
|  | static void qedf_link_update(void *dev, struct qed_link_output *link) | 
|  | { | 
|  | struct qedf_ctx *qedf = (struct qedf_ctx *)dev; | 
|  |  | 
|  | /* | 
|  | * Prevent race where we're removing the module and we get link update | 
|  | * for qed. | 
|  | */ | 
|  | if (test_bit(QEDF_UNLOADING, &qedf->flags)) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Ignore link update, driver getting unload.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (link->link_up) { | 
|  | if (atomic_read(&qedf->link_state) == QEDF_LINK_UP) { | 
|  | QEDF_INFO((&qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Ignoring link up event as link is already up.\n"); | 
|  | return; | 
|  | } | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "LINK UP (%d GB/s).\n", | 
|  | link->speed / 1000); | 
|  |  | 
|  | /* Cancel any pending link down work */ | 
|  | cancel_delayed_work(&qedf->link_update); | 
|  |  | 
|  | atomic_set(&qedf->link_state, QEDF_LINK_UP); | 
|  | qedf_update_link_speed(qedf, link); | 
|  |  | 
|  | if (atomic_read(&qedf->dcbx) == QEDF_DCBX_DONE || | 
|  | qedf_dcbx_no_wait) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "DCBx done.\n"); | 
|  | if (atomic_read(&qedf->link_down_tmo_valid) > 0) | 
|  | queue_delayed_work(qedf->link_update_wq, | 
|  | &qedf->link_recovery, 0); | 
|  | else | 
|  | queue_delayed_work(qedf->link_update_wq, | 
|  | &qedf->link_update, 0); | 
|  | atomic_set(&qedf->link_down_tmo_valid, 0); | 
|  | } | 
|  |  | 
|  | } else { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "LINK DOWN.\n"); | 
|  |  | 
|  | atomic_set(&qedf->link_state, QEDF_LINK_DOWN); | 
|  | atomic_set(&qedf->dcbx, QEDF_DCBX_PENDING); | 
|  | /* | 
|  | * Flag that we're waiting for the link to come back up before | 
|  | * informing the fcoe layer of the event. | 
|  | */ | 
|  | if (qedf_link_down_tmo > 0) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Starting link down tmo.\n"); | 
|  | atomic_set(&qedf->link_down_tmo_valid, 1); | 
|  | } | 
|  | qedf->vlan_id = 0; | 
|  | qedf_update_link_speed(qedf, link); | 
|  | queue_delayed_work(qedf->link_update_wq, &qedf->link_update, | 
|  | qedf_link_down_tmo * HZ); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | static void qedf_dcbx_handler(void *dev, struct qed_dcbx_get *get, u32 mib_type) | 
|  | { | 
|  | struct qedf_ctx *qedf = (struct qedf_ctx *)dev; | 
|  | u8 tmp_prio; | 
|  |  | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "DCBx event valid=%d enabled=%d fcoe " | 
|  | "prio=%d.\n", get->operational.valid, get->operational.enabled, | 
|  | get->operational.app_prio.fcoe); | 
|  |  | 
|  | if (get->operational.enabled && get->operational.valid) { | 
|  | /* If DCBX was already negotiated on link up then just exit */ | 
|  | if (atomic_read(&qedf->dcbx) == QEDF_DCBX_DONE) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "DCBX already set on link up.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | atomic_set(&qedf->dcbx, QEDF_DCBX_DONE); | 
|  |  | 
|  | /* | 
|  | * Set the 8021q priority in the following manner: | 
|  | * | 
|  | * 1. If a modparam is set use that | 
|  | * 2. If the value is not between 0..7 use the default | 
|  | * 3. Use the priority we get from the DCBX app tag | 
|  | */ | 
|  | tmp_prio = get->operational.app_prio.fcoe; | 
|  | if (qedf_default_prio > -1) | 
|  | qedf->prio = qedf_default_prio; | 
|  | else if (tmp_prio > 7) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "FIP/FCoE prio %d out of range, setting to %d.\n", | 
|  | tmp_prio, QEDF_DEFAULT_PRIO); | 
|  | qedf->prio = QEDF_DEFAULT_PRIO; | 
|  | } else | 
|  | qedf->prio = tmp_prio; | 
|  |  | 
|  | if (atomic_read(&qedf->link_state) == QEDF_LINK_UP && | 
|  | !qedf_dcbx_no_wait) { | 
|  | if (atomic_read(&qedf->link_down_tmo_valid) > 0) | 
|  | queue_delayed_work(qedf->link_update_wq, | 
|  | &qedf->link_recovery, 0); | 
|  | else | 
|  | queue_delayed_work(qedf->link_update_wq, | 
|  | &qedf->link_update, 0); | 
|  | atomic_set(&qedf->link_down_tmo_valid, 0); | 
|  | } | 
|  | } | 
|  |  | 
|  | } | 
|  |  | 
|  | static u32 qedf_get_login_failures(void *cookie) | 
|  | { | 
|  | struct qedf_ctx *qedf; | 
|  |  | 
|  | qedf = (struct qedf_ctx *)cookie; | 
|  | return qedf->flogi_failed; | 
|  | } | 
|  |  | 
|  | static struct qed_fcoe_cb_ops qedf_cb_ops = { | 
|  | { | 
|  | .link_update = qedf_link_update, | 
|  | .dcbx_aen = qedf_dcbx_handler, | 
|  | .get_generic_tlv_data = qedf_get_generic_tlv_data, | 
|  | .get_protocol_tlv_data = qedf_get_protocol_tlv_data, | 
|  | } | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Various transport templates. | 
|  | */ | 
|  |  | 
|  | static struct scsi_transport_template *qedf_fc_transport_template; | 
|  | static struct scsi_transport_template *qedf_fc_vport_transport_template; | 
|  |  | 
|  | /* | 
|  | * SCSI EH handlers | 
|  | */ | 
|  | static int qedf_eh_abort(struct scsi_cmnd *sc_cmd) | 
|  | { | 
|  | struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device)); | 
|  | struct fc_lport *lport; | 
|  | struct qedf_ctx *qedf; | 
|  | struct qedf_ioreq *io_req; | 
|  | struct fc_rport_libfc_priv *rp = rport->dd_data; | 
|  | struct fc_rport_priv *rdata; | 
|  | struct qedf_rport *fcport = NULL; | 
|  | int rc = FAILED; | 
|  | int wait_count = 100; | 
|  | int refcount = 0; | 
|  | int rval; | 
|  | int got_ref = 0; | 
|  |  | 
|  | lport = shost_priv(sc_cmd->device->host); | 
|  | qedf = (struct qedf_ctx *)lport_priv(lport); | 
|  |  | 
|  | /* rport and tgt are allocated together, so tgt should be non-NULL */ | 
|  | fcport = (struct qedf_rport *)&rp[1]; | 
|  | rdata = fcport->rdata; | 
|  | if (!rdata || !kref_get_unless_zero(&rdata->kref)) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "stale rport, sc_cmd=%p\n", sc_cmd); | 
|  | rc = 1; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  |  | 
|  | io_req = (struct qedf_ioreq *)sc_cmd->SCp.ptr; | 
|  | if (!io_req) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "sc_cmd not queued with lld, sc_cmd=%p op=0x%02x, port_id=%06x\n", | 
|  | sc_cmd, sc_cmd->cmnd[0], | 
|  | rdata->ids.port_id); | 
|  | rc = SUCCESS; | 
|  | goto drop_rdata_kref; | 
|  | } | 
|  |  | 
|  | rval = kref_get_unless_zero(&io_req->refcount);	/* ID: 005 */ | 
|  | if (rval) | 
|  | got_ref = 1; | 
|  |  | 
|  | /* If we got a valid io_req, confirm it belongs to this sc_cmd. */ | 
|  | if (!rval || io_req->sc_cmd != sc_cmd) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Freed/Incorrect io_req, io_req->sc_cmd=%p, sc_cmd=%p, port_id=%06x, bailing out.\n", | 
|  | io_req->sc_cmd, sc_cmd, rdata->ids.port_id); | 
|  |  | 
|  | goto drop_rdata_kref; | 
|  | } | 
|  |  | 
|  | if (fc_remote_port_chkready(rport)) { | 
|  | refcount = kref_read(&io_req->refcount); | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "rport not ready, io_req=%p, xid=0x%x sc_cmd=%p op=0x%02x, refcount=%d, port_id=%06x\n", | 
|  | io_req, io_req->xid, sc_cmd, sc_cmd->cmnd[0], | 
|  | refcount, rdata->ids.port_id); | 
|  |  | 
|  | goto drop_rdata_kref; | 
|  | } | 
|  |  | 
|  | rc = fc_block_scsi_eh(sc_cmd); | 
|  | if (rc) | 
|  | goto drop_rdata_kref; | 
|  |  | 
|  | if (test_bit(QEDF_RPORT_UPLOADING_CONNECTION, &fcport->flags)) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Connection uploading, xid=0x%x., port_id=%06x\n", | 
|  | io_req->xid, rdata->ids.port_id); | 
|  | while (io_req->sc_cmd && (wait_count != 0)) { | 
|  | msleep(100); | 
|  | wait_count--; | 
|  | } | 
|  | if (wait_count) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "ABTS succeeded\n"); | 
|  | rc = SUCCESS; | 
|  | } else { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "ABTS failed\n"); | 
|  | rc = FAILED; | 
|  | } | 
|  | goto drop_rdata_kref; | 
|  | } | 
|  |  | 
|  | if (lport->state != LPORT_ST_READY || !(lport->link_up)) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "link not ready.\n"); | 
|  | goto drop_rdata_kref; | 
|  | } | 
|  |  | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Aborting io_req=%p sc_cmd=%p xid=0x%x fp_idx=%d, port_id=%06x.\n", | 
|  | io_req, sc_cmd, io_req->xid, io_req->fp_idx, | 
|  | rdata->ids.port_id); | 
|  |  | 
|  | if (qedf->stop_io_on_error) { | 
|  | qedf_stop_all_io(qedf); | 
|  | rc = SUCCESS; | 
|  | goto drop_rdata_kref; | 
|  | } | 
|  |  | 
|  | init_completion(&io_req->abts_done); | 
|  | rval = qedf_initiate_abts(io_req, true); | 
|  | if (rval) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Failed to queue ABTS.\n"); | 
|  | /* | 
|  | * If we fail to queue the ABTS then return this command to | 
|  | * the SCSI layer as it will own and free the xid | 
|  | */ | 
|  | rc = SUCCESS; | 
|  | qedf_scsi_done(qedf, io_req, DID_ERROR); | 
|  | goto drop_rdata_kref; | 
|  | } | 
|  |  | 
|  | wait_for_completion(&io_req->abts_done); | 
|  |  | 
|  | if (io_req->event == QEDF_IOREQ_EV_ABORT_SUCCESS || | 
|  | io_req->event == QEDF_IOREQ_EV_ABORT_FAILED || | 
|  | io_req->event == QEDF_IOREQ_EV_CLEANUP_SUCCESS) { | 
|  | /* | 
|  | * If we get a reponse to the abort this is success from | 
|  | * the perspective that all references to the command have | 
|  | * been removed from the driver and firmware | 
|  | */ | 
|  | rc = SUCCESS; | 
|  | } else { | 
|  | /* If the abort and cleanup failed then return a failure */ | 
|  | rc = FAILED; | 
|  | } | 
|  |  | 
|  | if (rc == SUCCESS) | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "ABTS succeeded, xid=0x%x.\n", | 
|  | io_req->xid); | 
|  | else | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "ABTS failed, xid=0x%x.\n", | 
|  | io_req->xid); | 
|  |  | 
|  | drop_rdata_kref: | 
|  | kref_put(&rdata->kref, fc_rport_destroy); | 
|  | out: | 
|  | if (got_ref) | 
|  | kref_put(&io_req->refcount, qedf_release_cmd); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int qedf_eh_target_reset(struct scsi_cmnd *sc_cmd) | 
|  | { | 
|  | QEDF_ERR(NULL, "%d:0:%d:%lld: TARGET RESET Issued...", | 
|  | sc_cmd->device->host->host_no, sc_cmd->device->id, | 
|  | sc_cmd->device->lun); | 
|  | return qedf_initiate_tmf(sc_cmd, FCP_TMF_TGT_RESET); | 
|  | } | 
|  |  | 
|  | static int qedf_eh_device_reset(struct scsi_cmnd *sc_cmd) | 
|  | { | 
|  | QEDF_ERR(NULL, "%d:0:%d:%lld: LUN RESET Issued... ", | 
|  | sc_cmd->device->host->host_no, sc_cmd->device->id, | 
|  | sc_cmd->device->lun); | 
|  | return qedf_initiate_tmf(sc_cmd, FCP_TMF_LUN_RESET); | 
|  | } | 
|  |  | 
|  | bool qedf_wait_for_upload(struct qedf_ctx *qedf) | 
|  | { | 
|  | struct qedf_rport *fcport = NULL; | 
|  | int wait_cnt = 120; | 
|  |  | 
|  | while (wait_cnt--) { | 
|  | if (atomic_read(&qedf->num_offloads)) | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "Waiting for all uploads to complete num_offloads = 0x%x.\n", | 
|  | atomic_read(&qedf->num_offloads)); | 
|  | else | 
|  | return true; | 
|  | msleep(500); | 
|  | } | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(fcport, &qedf->fcports, peers) { | 
|  | if (fcport && test_bit(QEDF_RPORT_SESSION_READY, | 
|  | &fcport->flags)) { | 
|  | if (fcport->rdata) | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Waiting for fcport %p portid=%06x.\n", | 
|  | fcport, fcport->rdata->ids.port_id); | 
|  | } else { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Waiting for fcport %p.\n", fcport); | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | return false; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* Performs soft reset of qedf_ctx by simulating a link down/up */ | 
|  | void qedf_ctx_soft_reset(struct fc_lport *lport) | 
|  | { | 
|  | struct qedf_ctx *qedf; | 
|  | struct qed_link_output if_link; | 
|  |  | 
|  | if (lport->vport) { | 
|  | QEDF_ERR(NULL, "Cannot issue host reset on NPIV port.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | qedf = lport_priv(lport); | 
|  |  | 
|  | /* For host reset, essentially do a soft link up/down */ | 
|  | atomic_set(&qedf->link_state, QEDF_LINK_DOWN); | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "Queuing link down work.\n"); | 
|  | queue_delayed_work(qedf->link_update_wq, &qedf->link_update, | 
|  | 0); | 
|  |  | 
|  | if (qedf_wait_for_upload(qedf) == false) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "Could not upload all sessions.\n"); | 
|  | WARN_ON(atomic_read(&qedf->num_offloads)); | 
|  | } | 
|  |  | 
|  | /* Before setting link up query physical link state */ | 
|  | qed_ops->common->get_link(qedf->cdev, &if_link); | 
|  | /* Bail if the physical link is not up */ | 
|  | if (!if_link.link_up) { | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "Physical link is not up.\n"); | 
|  | return; | 
|  | } | 
|  | /* Flush and wait to make sure link down is processed */ | 
|  | flush_delayed_work(&qedf->link_update); | 
|  | msleep(500); | 
|  |  | 
|  | atomic_set(&qedf->link_state, QEDF_LINK_UP); | 
|  | qedf->vlan_id  = 0; | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "Queue link up work.\n"); | 
|  | queue_delayed_work(qedf->link_update_wq, &qedf->link_update, | 
|  | 0); | 
|  | } | 
|  |  | 
|  | /* Reset the host by gracefully logging out and then logging back in */ | 
|  | static int qedf_eh_host_reset(struct scsi_cmnd *sc_cmd) | 
|  | { | 
|  | struct fc_lport *lport; | 
|  | struct qedf_ctx *qedf; | 
|  |  | 
|  | lport = shost_priv(sc_cmd->device->host); | 
|  | qedf = lport_priv(lport); | 
|  |  | 
|  | if (atomic_read(&qedf->link_state) == QEDF_LINK_DOWN || | 
|  | test_bit(QEDF_UNLOADING, &qedf->flags)) | 
|  | return FAILED; | 
|  |  | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "HOST RESET Issued..."); | 
|  |  | 
|  | qedf_ctx_soft_reset(lport); | 
|  |  | 
|  | return SUCCESS; | 
|  | } | 
|  |  | 
|  | static int qedf_slave_configure(struct scsi_device *sdev) | 
|  | { | 
|  | if (qedf_queue_depth) { | 
|  | scsi_change_queue_depth(sdev, qedf_queue_depth); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct scsi_host_template qedf_host_template = { | 
|  | .module 	= THIS_MODULE, | 
|  | .name 		= QEDF_MODULE_NAME, | 
|  | .this_id 	= -1, | 
|  | .cmd_per_lun	= 32, | 
|  | .max_sectors 	= 0xffff, | 
|  | .queuecommand 	= qedf_queuecommand, | 
|  | .shost_attrs	= qedf_host_attrs, | 
|  | .eh_abort_handler	= qedf_eh_abort, | 
|  | .eh_device_reset_handler = qedf_eh_device_reset, /* lun reset */ | 
|  | .eh_target_reset_handler = qedf_eh_target_reset, /* target reset */ | 
|  | .eh_host_reset_handler  = qedf_eh_host_reset, | 
|  | .slave_configure	= qedf_slave_configure, | 
|  | .dma_boundary = QED_HW_DMA_BOUNDARY, | 
|  | .sg_tablesize = QEDF_MAX_BDS_PER_CMD, | 
|  | .can_queue = FCOE_PARAMS_NUM_TASKS, | 
|  | .change_queue_depth = scsi_change_queue_depth, | 
|  | }; | 
|  |  | 
|  | static int qedf_get_paged_crc_eof(struct sk_buff *skb, int tlen) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | spin_lock(&qedf_global_lock); | 
|  | rc = fcoe_get_paged_crc_eof(skb, tlen, &qedf_global); | 
|  | spin_unlock(&qedf_global_lock); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static struct qedf_rport *qedf_fcport_lookup(struct qedf_ctx *qedf, u32 port_id) | 
|  | { | 
|  | struct qedf_rport *fcport; | 
|  | struct fc_rport_priv *rdata; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(fcport, &qedf->fcports, peers) { | 
|  | rdata = fcport->rdata; | 
|  | if (rdata == NULL) | 
|  | continue; | 
|  | if (rdata->ids.port_id == port_id) { | 
|  | rcu_read_unlock(); | 
|  | return fcport; | 
|  | } | 
|  | } | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | /* Return NULL to caller to let them know fcport was not found */ | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* Transmits an ELS frame over an offloaded session */ | 
|  | static int qedf_xmit_l2_frame(struct qedf_rport *fcport, struct fc_frame *fp) | 
|  | { | 
|  | struct fc_frame_header *fh; | 
|  | int rc = 0; | 
|  |  | 
|  | fh = fc_frame_header_get(fp); | 
|  | if ((fh->fh_type == FC_TYPE_ELS) && | 
|  | (fh->fh_r_ctl == FC_RCTL_ELS_REQ)) { | 
|  | switch (fc_frame_payload_op(fp)) { | 
|  | case ELS_ADISC: | 
|  | qedf_send_adisc(fcport, fp); | 
|  | rc = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qedf_xmit - qedf FCoE frame transmit function | 
|  | * | 
|  | */ | 
|  | static int qedf_xmit(struct fc_lport *lport, struct fc_frame *fp) | 
|  | { | 
|  | struct fc_lport		*base_lport; | 
|  | struct qedf_ctx		*qedf; | 
|  | struct ethhdr		*eh; | 
|  | struct fcoe_crc_eof	*cp; | 
|  | struct sk_buff		*skb; | 
|  | struct fc_frame_header	*fh; | 
|  | struct fcoe_hdr		*hp; | 
|  | u8			sof, eof; | 
|  | u32			crc; | 
|  | unsigned int		hlen, tlen, elen; | 
|  | int			wlen; | 
|  | struct fc_stats		*stats; | 
|  | struct fc_lport *tmp_lport; | 
|  | struct fc_lport *vn_port = NULL; | 
|  | struct qedf_rport *fcport; | 
|  | int rc; | 
|  | u16 vlan_tci = 0; | 
|  |  | 
|  | qedf = (struct qedf_ctx *)lport_priv(lport); | 
|  |  | 
|  | fh = fc_frame_header_get(fp); | 
|  | skb = fp_skb(fp); | 
|  |  | 
|  | /* Filter out traffic to other NPIV ports on the same host */ | 
|  | if (lport->vport) | 
|  | base_lport = shost_priv(vport_to_shost(lport->vport)); | 
|  | else | 
|  | base_lport = lport; | 
|  |  | 
|  | /* Flag if the destination is the base port */ | 
|  | if (base_lport->port_id == ntoh24(fh->fh_d_id)) { | 
|  | vn_port = base_lport; | 
|  | } else { | 
|  | /* Got through the list of vports attached to the base_lport | 
|  | * and see if we have a match with the destination address. | 
|  | */ | 
|  | list_for_each_entry(tmp_lport, &base_lport->vports, list) { | 
|  | if (tmp_lport->port_id == ntoh24(fh->fh_d_id)) { | 
|  | vn_port = tmp_lport; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (vn_port && ntoh24(fh->fh_d_id) != FC_FID_FLOGI) { | 
|  | struct fc_rport_priv *rdata = NULL; | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_LL2, | 
|  | "Dropping FCoE frame to %06x.\n", ntoh24(fh->fh_d_id)); | 
|  | kfree_skb(skb); | 
|  | rdata = fc_rport_lookup(lport, ntoh24(fh->fh_d_id)); | 
|  | if (rdata) { | 
|  | rdata->retries = lport->max_rport_retry_count; | 
|  | kref_put(&rdata->kref, fc_rport_destroy); | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  | /* End NPIV filtering */ | 
|  |  | 
|  | if (!qedf->ctlr.sel_fcf) { | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!test_bit(QEDF_LL2_STARTED, &qedf->flags)) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "LL2 not started\n"); | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (atomic_read(&qedf->link_state) != QEDF_LINK_UP) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "qedf link down\n"); | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (unlikely(fh->fh_r_ctl == FC_RCTL_ELS_REQ)) { | 
|  | if (fcoe_ctlr_els_send(&qedf->ctlr, lport, skb)) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Check to see if this needs to be sent on an offloaded session */ | 
|  | fcport = qedf_fcport_lookup(qedf, ntoh24(fh->fh_d_id)); | 
|  |  | 
|  | if (fcport && test_bit(QEDF_RPORT_SESSION_READY, &fcport->flags)) { | 
|  | rc = qedf_xmit_l2_frame(fcport, fp); | 
|  | /* | 
|  | * If the frame was successfully sent over the middle path | 
|  | * then do not try to also send it over the LL2 path | 
|  | */ | 
|  | if (rc) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | sof = fr_sof(fp); | 
|  | eof = fr_eof(fp); | 
|  |  | 
|  | elen = sizeof(struct ethhdr); | 
|  | hlen = sizeof(struct fcoe_hdr); | 
|  | tlen = sizeof(struct fcoe_crc_eof); | 
|  | wlen = (skb->len - tlen + sizeof(crc)) / FCOE_WORD_TO_BYTE; | 
|  |  | 
|  | skb->ip_summed = CHECKSUM_NONE; | 
|  | crc = fcoe_fc_crc(fp); | 
|  |  | 
|  | /* copy port crc and eof to the skb buff */ | 
|  | if (skb_is_nonlinear(skb)) { | 
|  | skb_frag_t *frag; | 
|  |  | 
|  | if (qedf_get_paged_crc_eof(skb, tlen)) { | 
|  | kfree_skb(skb); | 
|  | return -ENOMEM; | 
|  | } | 
|  | frag = &skb_shinfo(skb)->frags[skb_shinfo(skb)->nr_frags - 1]; | 
|  | cp = kmap_atomic(skb_frag_page(frag)) + skb_frag_off(frag); | 
|  | } else { | 
|  | cp = skb_put(skb, tlen); | 
|  | } | 
|  |  | 
|  | memset(cp, 0, sizeof(*cp)); | 
|  | cp->fcoe_eof = eof; | 
|  | cp->fcoe_crc32 = cpu_to_le32(~crc); | 
|  | if (skb_is_nonlinear(skb)) { | 
|  | kunmap_atomic(cp); | 
|  | cp = NULL; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* adjust skb network/transport offsets to match mac/fcoe/port */ | 
|  | skb_push(skb, elen + hlen); | 
|  | skb_reset_mac_header(skb); | 
|  | skb_reset_network_header(skb); | 
|  | skb->mac_len = elen; | 
|  | skb->protocol = htons(ETH_P_FCOE); | 
|  |  | 
|  | /* | 
|  | * Add VLAN tag to non-offload FCoE frame based on current stored VLAN | 
|  | * for FIP/FCoE traffic. | 
|  | */ | 
|  | __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), qedf->vlan_id); | 
|  |  | 
|  | /* fill up mac and fcoe headers */ | 
|  | eh = eth_hdr(skb); | 
|  | eh->h_proto = htons(ETH_P_FCOE); | 
|  | if (qedf->ctlr.map_dest) | 
|  | fc_fcoe_set_mac(eh->h_dest, fh->fh_d_id); | 
|  | else | 
|  | /* insert GW address */ | 
|  | ether_addr_copy(eh->h_dest, qedf->ctlr.dest_addr); | 
|  |  | 
|  | /* Set the source MAC address */ | 
|  | ether_addr_copy(eh->h_source, qedf->data_src_addr); | 
|  |  | 
|  | hp = (struct fcoe_hdr *)(eh + 1); | 
|  | memset(hp, 0, sizeof(*hp)); | 
|  | if (FC_FCOE_VER) | 
|  | FC_FCOE_ENCAPS_VER(hp, FC_FCOE_VER); | 
|  | hp->fcoe_sof = sof; | 
|  |  | 
|  | /*update tx stats */ | 
|  | stats = per_cpu_ptr(lport->stats, get_cpu()); | 
|  | stats->TxFrames++; | 
|  | stats->TxWords += wlen; | 
|  | put_cpu(); | 
|  |  | 
|  | /* Get VLAN ID from skb for printing purposes */ | 
|  | __vlan_hwaccel_get_tag(skb, &vlan_tci); | 
|  |  | 
|  | /* send down to lld */ | 
|  | fr_dev(fp) = lport; | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_LL2, "FCoE frame send: " | 
|  | "src=%06x dest=%06x r_ctl=%x type=%x vlan=%04x.\n", | 
|  | ntoh24(fh->fh_s_id), ntoh24(fh->fh_d_id), fh->fh_r_ctl, fh->fh_type, | 
|  | vlan_tci); | 
|  | if (qedf_dump_frames) | 
|  | print_hex_dump(KERN_WARNING, "fcoe: ", DUMP_PREFIX_OFFSET, 16, | 
|  | 1, skb->data, skb->len, false); | 
|  | rc = qed_ops->ll2->start_xmit(qedf->cdev, skb, 0); | 
|  | if (rc) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "start_xmit failed rc = %d.\n", rc); | 
|  | kfree_skb(skb); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qedf_alloc_sq(struct qedf_ctx *qedf, struct qedf_rport *fcport) | 
|  | { | 
|  | int rval = 0; | 
|  | u32 *pbl; | 
|  | dma_addr_t page; | 
|  | int num_pages; | 
|  |  | 
|  | /* Calculate appropriate queue and PBL sizes */ | 
|  | fcport->sq_mem_size = SQ_NUM_ENTRIES * sizeof(struct fcoe_wqe); | 
|  | fcport->sq_mem_size = ALIGN(fcport->sq_mem_size, QEDF_PAGE_SIZE); | 
|  | fcport->sq_pbl_size = (fcport->sq_mem_size / QEDF_PAGE_SIZE) * | 
|  | sizeof(void *); | 
|  | fcport->sq_pbl_size = fcport->sq_pbl_size + QEDF_PAGE_SIZE; | 
|  |  | 
|  | fcport->sq = dma_alloc_coherent(&qedf->pdev->dev, fcport->sq_mem_size, | 
|  | &fcport->sq_dma, GFP_KERNEL); | 
|  | if (!fcport->sq) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate send queue.\n"); | 
|  | rval = 1; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | fcport->sq_pbl = dma_alloc_coherent(&qedf->pdev->dev, | 
|  | fcport->sq_pbl_size, | 
|  | &fcport->sq_pbl_dma, GFP_KERNEL); | 
|  | if (!fcport->sq_pbl) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate send queue PBL.\n"); | 
|  | rval = 1; | 
|  | goto out_free_sq; | 
|  | } | 
|  |  | 
|  | /* Create PBL */ | 
|  | num_pages = fcport->sq_mem_size / QEDF_PAGE_SIZE; | 
|  | page = fcport->sq_dma; | 
|  | pbl = (u32 *)fcport->sq_pbl; | 
|  |  | 
|  | while (num_pages--) { | 
|  | *pbl = U64_LO(page); | 
|  | pbl++; | 
|  | *pbl = U64_HI(page); | 
|  | pbl++; | 
|  | page += QEDF_PAGE_SIZE; | 
|  | } | 
|  |  | 
|  | return rval; | 
|  |  | 
|  | out_free_sq: | 
|  | dma_free_coherent(&qedf->pdev->dev, fcport->sq_mem_size, fcport->sq, | 
|  | fcport->sq_dma); | 
|  | out: | 
|  | return rval; | 
|  | } | 
|  |  | 
|  | static void qedf_free_sq(struct qedf_ctx *qedf, struct qedf_rport *fcport) | 
|  | { | 
|  | if (fcport->sq_pbl) | 
|  | dma_free_coherent(&qedf->pdev->dev, fcport->sq_pbl_size, | 
|  | fcport->sq_pbl, fcport->sq_pbl_dma); | 
|  | if (fcport->sq) | 
|  | dma_free_coherent(&qedf->pdev->dev, fcport->sq_mem_size, | 
|  | fcport->sq, fcport->sq_dma); | 
|  | } | 
|  |  | 
|  | static int qedf_offload_connection(struct qedf_ctx *qedf, | 
|  | struct qedf_rport *fcport) | 
|  | { | 
|  | struct qed_fcoe_params_offload conn_info; | 
|  | u32 port_id; | 
|  | int rval; | 
|  | uint16_t total_sqe = (fcport->sq_mem_size / sizeof(struct fcoe_wqe)); | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_CONN, "Offloading connection " | 
|  | "portid=%06x.\n", fcport->rdata->ids.port_id); | 
|  | rval = qed_ops->acquire_conn(qedf->cdev, &fcport->handle, | 
|  | &fcport->fw_cid, &fcport->p_doorbell); | 
|  | if (rval) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Could not acquire connection " | 
|  | "for portid=%06x.\n", fcport->rdata->ids.port_id); | 
|  | rval = 1; /* For some reason qed returns 0 on failure here */ | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_CONN, "portid=%06x " | 
|  | "fw_cid=%08x handle=%d.\n", fcport->rdata->ids.port_id, | 
|  | fcport->fw_cid, fcport->handle); | 
|  |  | 
|  | memset(&conn_info, 0, sizeof(struct qed_fcoe_params_offload)); | 
|  |  | 
|  | /* Fill in the offload connection info */ | 
|  | conn_info.sq_pbl_addr = fcport->sq_pbl_dma; | 
|  |  | 
|  | conn_info.sq_curr_page_addr = (dma_addr_t)(*(u64 *)fcport->sq_pbl); | 
|  | conn_info.sq_next_page_addr = | 
|  | (dma_addr_t)(*(u64 *)(fcport->sq_pbl + 8)); | 
|  |  | 
|  | /* Need to use our FCoE MAC for the offload session */ | 
|  | ether_addr_copy(conn_info.src_mac, qedf->data_src_addr); | 
|  |  | 
|  | ether_addr_copy(conn_info.dst_mac, qedf->ctlr.dest_addr); | 
|  |  | 
|  | conn_info.tx_max_fc_pay_len = fcport->rdata->maxframe_size; | 
|  | conn_info.e_d_tov_timer_val = qedf->lport->e_d_tov / 20; | 
|  | conn_info.rec_tov_timer_val = 3; /* I think this is what E3 was */ | 
|  | conn_info.rx_max_fc_pay_len = fcport->rdata->maxframe_size; | 
|  |  | 
|  | /* Set VLAN data */ | 
|  | conn_info.vlan_tag = qedf->vlan_id << | 
|  | FCOE_CONN_OFFLOAD_RAMROD_DATA_VLAN_ID_SHIFT; | 
|  | conn_info.vlan_tag |= | 
|  | qedf->prio << FCOE_CONN_OFFLOAD_RAMROD_DATA_PRIORITY_SHIFT; | 
|  | conn_info.flags |= (FCOE_CONN_OFFLOAD_RAMROD_DATA_B_VLAN_FLAG_MASK << | 
|  | FCOE_CONN_OFFLOAD_RAMROD_DATA_B_VLAN_FLAG_SHIFT); | 
|  |  | 
|  | /* Set host port source id */ | 
|  | port_id = fc_host_port_id(qedf->lport->host); | 
|  | fcport->sid = port_id; | 
|  | conn_info.s_id.addr_hi = (port_id & 0x000000FF); | 
|  | conn_info.s_id.addr_mid = (port_id & 0x0000FF00) >> 8; | 
|  | conn_info.s_id.addr_lo = (port_id & 0x00FF0000) >> 16; | 
|  |  | 
|  | conn_info.max_conc_seqs_c3 = fcport->rdata->max_seq; | 
|  |  | 
|  | /* Set remote port destination id */ | 
|  | port_id = fcport->rdata->rport->port_id; | 
|  | conn_info.d_id.addr_hi = (port_id & 0x000000FF); | 
|  | conn_info.d_id.addr_mid = (port_id & 0x0000FF00) >> 8; | 
|  | conn_info.d_id.addr_lo = (port_id & 0x00FF0000) >> 16; | 
|  |  | 
|  | conn_info.def_q_idx = 0; /* Default index for send queue? */ | 
|  |  | 
|  | /* Set FC-TAPE specific flags if needed */ | 
|  | if (fcport->dev_type == QEDF_RPORT_TYPE_TAPE) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_CONN, | 
|  | "Enable CONF, REC for portid=%06x.\n", | 
|  | fcport->rdata->ids.port_id); | 
|  | conn_info.flags |= 1 << | 
|  | FCOE_CONN_OFFLOAD_RAMROD_DATA_B_CONF_REQ_SHIFT; | 
|  | conn_info.flags |= | 
|  | ((fcport->rdata->sp_features & FC_SP_FT_SEQC) ? 1 : 0) << | 
|  | FCOE_CONN_OFFLOAD_RAMROD_DATA_B_REC_VALID_SHIFT; | 
|  | } | 
|  |  | 
|  | rval = qed_ops->offload_conn(qedf->cdev, fcport->handle, &conn_info); | 
|  | if (rval) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Could not offload connection " | 
|  | "for portid=%06x.\n", fcport->rdata->ids.port_id); | 
|  | goto out_free_conn; | 
|  | } else | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_CONN, "Offload " | 
|  | "succeeded portid=%06x total_sqe=%d.\n", | 
|  | fcport->rdata->ids.port_id, total_sqe); | 
|  |  | 
|  | spin_lock_init(&fcport->rport_lock); | 
|  | atomic_set(&fcport->free_sqes, total_sqe); | 
|  | return 0; | 
|  | out_free_conn: | 
|  | qed_ops->release_conn(qedf->cdev, fcport->handle); | 
|  | out: | 
|  | return rval; | 
|  | } | 
|  |  | 
|  | #define QEDF_TERM_BUFF_SIZE		10 | 
|  | static void qedf_upload_connection(struct qedf_ctx *qedf, | 
|  | struct qedf_rport *fcport) | 
|  | { | 
|  | void *term_params; | 
|  | dma_addr_t term_params_dma; | 
|  |  | 
|  | /* Term params needs to be a DMA coherent buffer as qed shared the | 
|  | * physical DMA address with the firmware. The buffer may be used in | 
|  | * the receive path so we may eventually have to move this. | 
|  | */ | 
|  | term_params = dma_alloc_coherent(&qedf->pdev->dev, QEDF_TERM_BUFF_SIZE, | 
|  | &term_params_dma, GFP_KERNEL); | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_CONN, "Uploading connection " | 
|  | "port_id=%06x.\n", fcport->rdata->ids.port_id); | 
|  |  | 
|  | qed_ops->destroy_conn(qedf->cdev, fcport->handle, term_params_dma); | 
|  | qed_ops->release_conn(qedf->cdev, fcport->handle); | 
|  |  | 
|  | dma_free_coherent(&qedf->pdev->dev, QEDF_TERM_BUFF_SIZE, term_params, | 
|  | term_params_dma); | 
|  | } | 
|  |  | 
|  | static void qedf_cleanup_fcport(struct qedf_ctx *qedf, | 
|  | struct qedf_rport *fcport) | 
|  | { | 
|  | struct fc_rport_priv *rdata = fcport->rdata; | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_CONN, "Cleaning up portid=%06x.\n", | 
|  | fcport->rdata->ids.port_id); | 
|  |  | 
|  | /* Flush any remaining i/o's before we upload the connection */ | 
|  | qedf_flush_active_ios(fcport, -1); | 
|  |  | 
|  | if (test_and_clear_bit(QEDF_RPORT_SESSION_READY, &fcport->flags)) | 
|  | qedf_upload_connection(qedf, fcport); | 
|  | qedf_free_sq(qedf, fcport); | 
|  | fcport->rdata = NULL; | 
|  | fcport->qedf = NULL; | 
|  | kref_put(&rdata->kref, fc_rport_destroy); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * This event_callback is called after successful completion of libfc | 
|  | * initiated target login. qedf can proceed with initiating the session | 
|  | * establishment. | 
|  | */ | 
|  | static void qedf_rport_event_handler(struct fc_lport *lport, | 
|  | struct fc_rport_priv *rdata, | 
|  | enum fc_rport_event event) | 
|  | { | 
|  | struct qedf_ctx *qedf = lport_priv(lport); | 
|  | struct fc_rport *rport = rdata->rport; | 
|  | struct fc_rport_libfc_priv *rp; | 
|  | struct qedf_rport *fcport; | 
|  | u32 port_id; | 
|  | int rval; | 
|  | unsigned long flags; | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "event = %d, " | 
|  | "port_id = 0x%x\n", event, rdata->ids.port_id); | 
|  |  | 
|  | switch (event) { | 
|  | case RPORT_EV_READY: | 
|  | if (!rport) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "rport is NULL.\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | rp = rport->dd_data; | 
|  | fcport = (struct qedf_rport *)&rp[1]; | 
|  | fcport->qedf = qedf; | 
|  |  | 
|  | if (atomic_read(&qedf->num_offloads) >= QEDF_MAX_SESSIONS) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Not offloading " | 
|  | "portid=0x%x as max number of offloaded sessions " | 
|  | "reached.\n", rdata->ids.port_id); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Don't try to offload the session again. Can happen when we | 
|  | * get an ADISC | 
|  | */ | 
|  | if (test_bit(QEDF_RPORT_SESSION_READY, &fcport->flags)) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Session already " | 
|  | "offloaded, portid=0x%x.\n", | 
|  | rdata->ids.port_id); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (rport->port_id == FC_FID_DIR_SERV) { | 
|  | /* | 
|  | * qedf_rport structure doesn't exist for | 
|  | * directory server. | 
|  | * We should not come here, as lport will | 
|  | * take care of fabric login | 
|  | */ | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "rport struct does not " | 
|  | "exist for dir server port_id=%x\n", | 
|  | rdata->ids.port_id); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (rdata->spp_type != FC_TYPE_FCP) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Not offloading since spp type isn't FCP\n"); | 
|  | break; | 
|  | } | 
|  | if (!(rdata->ids.roles & FC_RPORT_ROLE_FCP_TARGET)) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Not FCP target so not offloading\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Initial reference held on entry, so this can't fail */ | 
|  | kref_get(&rdata->kref); | 
|  | fcport->rdata = rdata; | 
|  | fcport->rport = rport; | 
|  |  | 
|  | rval = qedf_alloc_sq(qedf, fcport); | 
|  | if (rval) { | 
|  | qedf_cleanup_fcport(qedf, fcport); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Set device type */ | 
|  | if (rdata->flags & FC_RP_FLAGS_RETRY && | 
|  | rdata->ids.roles & FC_RPORT_ROLE_FCP_TARGET && | 
|  | !(rdata->ids.roles & FC_RPORT_ROLE_FCP_INITIATOR)) { | 
|  | fcport->dev_type = QEDF_RPORT_TYPE_TAPE; | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "portid=%06x is a TAPE device.\n", | 
|  | rdata->ids.port_id); | 
|  | } else { | 
|  | fcport->dev_type = QEDF_RPORT_TYPE_DISK; | 
|  | } | 
|  |  | 
|  | rval = qedf_offload_connection(qedf, fcport); | 
|  | if (rval) { | 
|  | qedf_cleanup_fcport(qedf, fcport); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Add fcport to list of qedf_ctx list of offloaded ports */ | 
|  | spin_lock_irqsave(&qedf->hba_lock, flags); | 
|  | list_add_rcu(&fcport->peers, &qedf->fcports); | 
|  | spin_unlock_irqrestore(&qedf->hba_lock, flags); | 
|  |  | 
|  | /* | 
|  | * Set the session ready bit to let everyone know that this | 
|  | * connection is ready for I/O | 
|  | */ | 
|  | set_bit(QEDF_RPORT_SESSION_READY, &fcport->flags); | 
|  | atomic_inc(&qedf->num_offloads); | 
|  |  | 
|  | break; | 
|  | case RPORT_EV_LOGO: | 
|  | case RPORT_EV_FAILED: | 
|  | case RPORT_EV_STOP: | 
|  | port_id = rdata->ids.port_id; | 
|  | if (port_id == FC_FID_DIR_SERV) | 
|  | break; | 
|  |  | 
|  | if (!rport) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "port_id=%x - rport notcreated Yet!!\n", port_id); | 
|  | break; | 
|  | } | 
|  | rp = rport->dd_data; | 
|  | /* | 
|  | * Perform session upload. Note that rdata->peers is already | 
|  | * removed from disc->rports list before we get this event. | 
|  | */ | 
|  | fcport = (struct qedf_rport *)&rp[1]; | 
|  |  | 
|  | spin_lock_irqsave(&fcport->rport_lock, flags); | 
|  | /* Only free this fcport if it is offloaded already */ | 
|  | if (test_bit(QEDF_RPORT_SESSION_READY, &fcport->flags) && | 
|  | !test_bit(QEDF_RPORT_UPLOADING_CONNECTION, | 
|  | &fcport->flags)) { | 
|  | set_bit(QEDF_RPORT_UPLOADING_CONNECTION, | 
|  | &fcport->flags); | 
|  | spin_unlock_irqrestore(&fcport->rport_lock, flags); | 
|  | qedf_cleanup_fcport(qedf, fcport); | 
|  | /* | 
|  | * Remove fcport to list of qedf_ctx list of offloaded | 
|  | * ports | 
|  | */ | 
|  | spin_lock_irqsave(&qedf->hba_lock, flags); | 
|  | list_del_rcu(&fcport->peers); | 
|  | spin_unlock_irqrestore(&qedf->hba_lock, flags); | 
|  |  | 
|  | clear_bit(QEDF_RPORT_UPLOADING_CONNECTION, | 
|  | &fcport->flags); | 
|  | atomic_dec(&qedf->num_offloads); | 
|  | } else { | 
|  | spin_unlock_irqrestore(&fcport->rport_lock, flags); | 
|  | } | 
|  | break; | 
|  |  | 
|  | case RPORT_EV_NONE: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qedf_abort_io(struct fc_lport *lport) | 
|  | { | 
|  | /* NO-OP but need to fill in the template */ | 
|  | } | 
|  |  | 
|  | static void qedf_fcp_cleanup(struct fc_lport *lport) | 
|  | { | 
|  | /* | 
|  | * NO-OP but need to fill in template to prevent a NULL | 
|  | * function pointer dereference during link down. I/Os | 
|  | * will be flushed when port is uploaded. | 
|  | */ | 
|  | } | 
|  |  | 
|  | static struct libfc_function_template qedf_lport_template = { | 
|  | .frame_send		= qedf_xmit, | 
|  | .fcp_abort_io		= qedf_abort_io, | 
|  | .fcp_cleanup		= qedf_fcp_cleanup, | 
|  | .rport_event_callback	= qedf_rport_event_handler, | 
|  | .elsct_send		= qedf_elsct_send, | 
|  | }; | 
|  |  | 
|  | static void qedf_fcoe_ctlr_setup(struct qedf_ctx *qedf) | 
|  | { | 
|  | fcoe_ctlr_init(&qedf->ctlr, FIP_MODE_AUTO); | 
|  |  | 
|  | qedf->ctlr.send = qedf_fip_send; | 
|  | qedf->ctlr.get_src_addr = qedf_get_src_mac; | 
|  | ether_addr_copy(qedf->ctlr.ctl_src_addr, qedf->mac); | 
|  | } | 
|  |  | 
|  | static void qedf_setup_fdmi(struct qedf_ctx *qedf) | 
|  | { | 
|  | struct fc_lport *lport = qedf->lport; | 
|  | struct fc_host_attrs *fc_host = shost_to_fc_host(lport->host); | 
|  | u8 buf[8]; | 
|  | int i, pos; | 
|  |  | 
|  | /* | 
|  | * fdmi_enabled needs to be set for libfc to execute FDMI registration. | 
|  | */ | 
|  | lport->fdmi_enabled = 1; | 
|  |  | 
|  | /* | 
|  | * Setup the necessary fc_host attributes to that will be used to fill | 
|  | * in the FDMI information. | 
|  | */ | 
|  |  | 
|  | /* Get the PCI-e Device Serial Number Capability */ | 
|  | pos = pci_find_ext_capability(qedf->pdev, PCI_EXT_CAP_ID_DSN); | 
|  | if (pos) { | 
|  | pos += 4; | 
|  | for (i = 0; i < 8; i++) | 
|  | pci_read_config_byte(qedf->pdev, pos + i, &buf[i]); | 
|  |  | 
|  | snprintf(fc_host->serial_number, | 
|  | sizeof(fc_host->serial_number), | 
|  | "%02X%02X%02X%02X%02X%02X%02X%02X", | 
|  | buf[7], buf[6], buf[5], buf[4], | 
|  | buf[3], buf[2], buf[1], buf[0]); | 
|  | } else | 
|  | snprintf(fc_host->serial_number, | 
|  | sizeof(fc_host->serial_number), "Unknown"); | 
|  |  | 
|  | snprintf(fc_host->manufacturer, | 
|  | sizeof(fc_host->manufacturer), "%s", "Cavium Inc."); | 
|  |  | 
|  | snprintf(fc_host->model, sizeof(fc_host->model), "%s", "QL41000"); | 
|  |  | 
|  | snprintf(fc_host->model_description, sizeof(fc_host->model_description), | 
|  | "%s", "QLogic FastLinQ QL41000 Series 10/25/40/50GGbE Controller" | 
|  | "(FCoE)"); | 
|  |  | 
|  | snprintf(fc_host->hardware_version, sizeof(fc_host->hardware_version), | 
|  | "Rev %d", qedf->pdev->revision); | 
|  |  | 
|  | snprintf(fc_host->driver_version, sizeof(fc_host->driver_version), | 
|  | "%s", QEDF_VERSION); | 
|  |  | 
|  | snprintf(fc_host->firmware_version, sizeof(fc_host->firmware_version), | 
|  | "%d.%d.%d.%d", FW_MAJOR_VERSION, FW_MINOR_VERSION, | 
|  | FW_REVISION_VERSION, FW_ENGINEERING_VERSION); | 
|  | } | 
|  |  | 
|  | static int qedf_lport_setup(struct qedf_ctx *qedf) | 
|  | { | 
|  | struct fc_lport *lport = qedf->lport; | 
|  |  | 
|  | lport->link_up = 0; | 
|  | lport->max_retry_count = QEDF_FLOGI_RETRY_CNT; | 
|  | lport->max_rport_retry_count = QEDF_RPORT_RETRY_CNT; | 
|  | lport->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS | | 
|  | FCP_SPPF_RETRY | FCP_SPPF_CONF_COMPL); | 
|  | lport->boot_time = jiffies; | 
|  | lport->e_d_tov = 2 * 1000; | 
|  | lport->r_a_tov = 10 * 1000; | 
|  |  | 
|  | /* Set NPIV support */ | 
|  | lport->does_npiv = 1; | 
|  | fc_host_max_npiv_vports(lport->host) = QEDF_MAX_NPIV; | 
|  |  | 
|  | fc_set_wwnn(lport, qedf->wwnn); | 
|  | fc_set_wwpn(lport, qedf->wwpn); | 
|  |  | 
|  | if (fcoe_libfc_config(lport, &qedf->ctlr, &qedf_lport_template, 0)) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "fcoe_libfc_config failed.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Allocate the exchange manager */ | 
|  | fc_exch_mgr_alloc(lport, FC_CLASS_3, FCOE_PARAMS_NUM_TASKS, | 
|  | 0xfffe, NULL); | 
|  |  | 
|  | if (fc_lport_init_stats(lport)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Finish lport config */ | 
|  | fc_lport_config(lport); | 
|  |  | 
|  | /* Set max frame size */ | 
|  | fc_set_mfs(lport, QEDF_MFS); | 
|  | fc_host_maxframe_size(lport->host) = lport->mfs; | 
|  |  | 
|  | /* Set default dev_loss_tmo based on module parameter */ | 
|  | fc_host_dev_loss_tmo(lport->host) = qedf_dev_loss_tmo; | 
|  |  | 
|  | /* Set symbolic node name */ | 
|  | snprintf(fc_host_symbolic_name(lport->host), 256, | 
|  | "QLogic %s v%s", QEDF_MODULE_NAME, QEDF_VERSION); | 
|  |  | 
|  | qedf_setup_fdmi(qedf); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * NPIV functions | 
|  | */ | 
|  |  | 
|  | static int qedf_vport_libfc_config(struct fc_vport *vport, | 
|  | struct fc_lport *lport) | 
|  | { | 
|  | lport->link_up = 0; | 
|  | lport->qfull = 0; | 
|  | lport->max_retry_count = QEDF_FLOGI_RETRY_CNT; | 
|  | lport->max_rport_retry_count = QEDF_RPORT_RETRY_CNT; | 
|  | lport->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS | | 
|  | FCP_SPPF_RETRY | FCP_SPPF_CONF_COMPL); | 
|  | lport->boot_time = jiffies; | 
|  | lport->e_d_tov = 2 * 1000; | 
|  | lport->r_a_tov = 10 * 1000; | 
|  | lport->does_npiv = 1; /* Temporary until we add NPIV support */ | 
|  |  | 
|  | /* Allocate stats for vport */ | 
|  | if (fc_lport_init_stats(lport)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* Finish lport config */ | 
|  | fc_lport_config(lport); | 
|  |  | 
|  | /* offload related configuration */ | 
|  | lport->crc_offload = 0; | 
|  | lport->seq_offload = 0; | 
|  | lport->lro_enabled = 0; | 
|  | lport->lro_xid = 0; | 
|  | lport->lso_max = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qedf_vport_create(struct fc_vport *vport, bool disabled) | 
|  | { | 
|  | struct Scsi_Host *shost = vport_to_shost(vport); | 
|  | struct fc_lport *n_port = shost_priv(shost); | 
|  | struct fc_lport *vn_port; | 
|  | struct qedf_ctx *base_qedf = lport_priv(n_port); | 
|  | struct qedf_ctx *vport_qedf; | 
|  |  | 
|  | char buf[32]; | 
|  | int rc = 0; | 
|  |  | 
|  | rc = fcoe_validate_vport_create(vport); | 
|  | if (rc) { | 
|  | fcoe_wwn_to_str(vport->port_name, buf, sizeof(buf)); | 
|  | QEDF_WARN(&(base_qedf->dbg_ctx), "Failed to create vport, " | 
|  | "WWPN (0x%s) already exists.\n", buf); | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | if (atomic_read(&base_qedf->link_state) != QEDF_LINK_UP) { | 
|  | QEDF_WARN(&(base_qedf->dbg_ctx), "Cannot create vport " | 
|  | "because link is not up.\n"); | 
|  | rc = -EIO; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | vn_port = libfc_vport_create(vport, sizeof(struct qedf_ctx)); | 
|  | if (!vn_port) { | 
|  | QEDF_WARN(&(base_qedf->dbg_ctx), "Could not create lport " | 
|  | "for vport.\n"); | 
|  | rc = -ENOMEM; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | fcoe_wwn_to_str(vport->port_name, buf, sizeof(buf)); | 
|  | QEDF_ERR(&(base_qedf->dbg_ctx), "Creating NPIV port, WWPN=%s.\n", | 
|  | buf); | 
|  |  | 
|  | /* Copy some fields from base_qedf */ | 
|  | vport_qedf = lport_priv(vn_port); | 
|  | memcpy(vport_qedf, base_qedf, sizeof(struct qedf_ctx)); | 
|  |  | 
|  | /* Set qedf data specific to this vport */ | 
|  | vport_qedf->lport = vn_port; | 
|  | /* Use same hba_lock as base_qedf */ | 
|  | vport_qedf->hba_lock = base_qedf->hba_lock; | 
|  | vport_qedf->pdev = base_qedf->pdev; | 
|  | vport_qedf->cmd_mgr = base_qedf->cmd_mgr; | 
|  | init_completion(&vport_qedf->flogi_compl); | 
|  | INIT_LIST_HEAD(&vport_qedf->fcports); | 
|  |  | 
|  | rc = qedf_vport_libfc_config(vport, vn_port); | 
|  | if (rc) { | 
|  | QEDF_ERR(&(base_qedf->dbg_ctx), "Could not allocate memory " | 
|  | "for lport stats.\n"); | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | fc_set_wwnn(vn_port, vport->node_name); | 
|  | fc_set_wwpn(vn_port, vport->port_name); | 
|  | vport_qedf->wwnn = vn_port->wwnn; | 
|  | vport_qedf->wwpn = vn_port->wwpn; | 
|  |  | 
|  | vn_port->host->transportt = qedf_fc_vport_transport_template; | 
|  | vn_port->host->can_queue = FCOE_PARAMS_NUM_TASKS; | 
|  | vn_port->host->max_lun = qedf_max_lun; | 
|  | vn_port->host->sg_tablesize = QEDF_MAX_BDS_PER_CMD; | 
|  | vn_port->host->max_cmd_len = QEDF_MAX_CDB_LEN; | 
|  |  | 
|  | rc = scsi_add_host(vn_port->host, &vport->dev); | 
|  | if (rc) { | 
|  | QEDF_WARN(&base_qedf->dbg_ctx, | 
|  | "Error adding Scsi_Host rc=0x%x.\n", rc); | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | /* Set default dev_loss_tmo based on module parameter */ | 
|  | fc_host_dev_loss_tmo(vn_port->host) = qedf_dev_loss_tmo; | 
|  |  | 
|  | /* Init libfc stuffs */ | 
|  | memcpy(&vn_port->tt, &qedf_lport_template, | 
|  | sizeof(qedf_lport_template)); | 
|  | fc_exch_init(vn_port); | 
|  | fc_elsct_init(vn_port); | 
|  | fc_lport_init(vn_port); | 
|  | fc_disc_init(vn_port); | 
|  | fc_disc_config(vn_port, vn_port); | 
|  |  | 
|  |  | 
|  | /* Allocate the exchange manager */ | 
|  | shost = vport_to_shost(vport); | 
|  | n_port = shost_priv(shost); | 
|  | fc_exch_mgr_list_clone(n_port, vn_port); | 
|  |  | 
|  | /* Set max frame size */ | 
|  | fc_set_mfs(vn_port, QEDF_MFS); | 
|  |  | 
|  | fc_host_port_type(vn_port->host) = FC_PORTTYPE_UNKNOWN; | 
|  |  | 
|  | if (disabled) { | 
|  | fc_vport_set_state(vport, FC_VPORT_DISABLED); | 
|  | } else { | 
|  | vn_port->boot_time = jiffies; | 
|  | fc_fabric_login(vn_port); | 
|  | fc_vport_setlink(vn_port); | 
|  | } | 
|  |  | 
|  | QEDF_INFO(&(base_qedf->dbg_ctx), QEDF_LOG_NPIV, "vn_port=%p.\n", | 
|  | vn_port); | 
|  |  | 
|  | /* Set up debug context for vport */ | 
|  | vport_qedf->dbg_ctx.host_no = vn_port->host->host_no; | 
|  | vport_qedf->dbg_ctx.pdev = base_qedf->pdev; | 
|  |  | 
|  | err2: | 
|  | scsi_host_put(vn_port->host); | 
|  | err1: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int qedf_vport_destroy(struct fc_vport *vport) | 
|  | { | 
|  | struct Scsi_Host *shost = vport_to_shost(vport); | 
|  | struct fc_lport *n_port = shost_priv(shost); | 
|  | struct fc_lport *vn_port = vport->dd_data; | 
|  | struct qedf_ctx *qedf = lport_priv(vn_port); | 
|  |  | 
|  | if (!qedf) { | 
|  | QEDF_ERR(NULL, "qedf is NULL.\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Set unloading bit on vport qedf_ctx to prevent more I/O */ | 
|  | set_bit(QEDF_UNLOADING, &qedf->flags); | 
|  |  | 
|  | mutex_lock(&n_port->lp_mutex); | 
|  | list_del(&vn_port->list); | 
|  | mutex_unlock(&n_port->lp_mutex); | 
|  |  | 
|  | fc_fabric_logoff(vn_port); | 
|  | fc_lport_destroy(vn_port); | 
|  |  | 
|  | /* Detach from scsi-ml */ | 
|  | fc_remove_host(vn_port->host); | 
|  | scsi_remove_host(vn_port->host); | 
|  |  | 
|  | /* | 
|  | * Only try to release the exchange manager if the vn_port | 
|  | * configuration is complete. | 
|  | */ | 
|  | if (vn_port->state == LPORT_ST_READY) | 
|  | fc_exch_mgr_free(vn_port); | 
|  |  | 
|  | /* Free memory used by statistical counters */ | 
|  | fc_lport_free_stats(vn_port); | 
|  |  | 
|  | /* Release Scsi_Host */ | 
|  | if (vn_port->host) | 
|  | scsi_host_put(vn_port->host); | 
|  |  | 
|  | out: | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qedf_vport_disable(struct fc_vport *vport, bool disable) | 
|  | { | 
|  | struct fc_lport *lport = vport->dd_data; | 
|  |  | 
|  | if (disable) { | 
|  | fc_vport_set_state(vport, FC_VPORT_DISABLED); | 
|  | fc_fabric_logoff(lport); | 
|  | } else { | 
|  | lport->boot_time = jiffies; | 
|  | fc_fabric_login(lport); | 
|  | fc_vport_setlink(lport); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * During removal we need to wait for all the vports associated with a port | 
|  | * to be destroyed so we avoid a race condition where libfc is still trying | 
|  | * to reap vports while the driver remove function has already reaped the | 
|  | * driver contexts associated with the physical port. | 
|  | */ | 
|  | static void qedf_wait_for_vport_destroy(struct qedf_ctx *qedf) | 
|  | { | 
|  | struct fc_host_attrs *fc_host = shost_to_fc_host(qedf->lport->host); | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_NPIV, | 
|  | "Entered.\n"); | 
|  | while (fc_host->npiv_vports_inuse > 0) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_NPIV, | 
|  | "Waiting for all vports to be reaped.\n"); | 
|  | msleep(1000); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * qedf_fcoe_reset - Resets the fcoe | 
|  | * | 
|  | * @shost: shost the reset is from | 
|  | * | 
|  | * Returns: always 0 | 
|  | */ | 
|  | static int qedf_fcoe_reset(struct Scsi_Host *shost) | 
|  | { | 
|  | struct fc_lport *lport = shost_priv(shost); | 
|  |  | 
|  | qedf_ctx_soft_reset(lport); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void qedf_get_host_port_id(struct Scsi_Host *shost) | 
|  | { | 
|  | struct fc_lport *lport = shost_priv(shost); | 
|  |  | 
|  | fc_host_port_id(shost) = lport->port_id; | 
|  | } | 
|  |  | 
|  | static struct fc_host_statistics *qedf_fc_get_host_stats(struct Scsi_Host | 
|  | *shost) | 
|  | { | 
|  | struct fc_host_statistics *qedf_stats; | 
|  | struct fc_lport *lport = shost_priv(shost); | 
|  | struct qedf_ctx *qedf = lport_priv(lport); | 
|  | struct qed_fcoe_stats *fw_fcoe_stats; | 
|  |  | 
|  | qedf_stats = fc_get_host_stats(shost); | 
|  |  | 
|  | /* We don't collect offload stats for specific NPIV ports */ | 
|  | if (lport->vport) | 
|  | goto out; | 
|  |  | 
|  | fw_fcoe_stats = kmalloc(sizeof(struct qed_fcoe_stats), GFP_KERNEL); | 
|  | if (!fw_fcoe_stats) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Could not allocate memory for " | 
|  | "fw_fcoe_stats.\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | mutex_lock(&qedf->stats_mutex); | 
|  |  | 
|  | /* Query firmware for offload stats */ | 
|  | qed_ops->get_stats(qedf->cdev, fw_fcoe_stats); | 
|  |  | 
|  | /* | 
|  | * The expectation is that we add our offload stats to the stats | 
|  | * being maintained by libfc each time the fc_get_host_status callback | 
|  | * is invoked. The additions are not carried over for each call to | 
|  | * the fc_get_host_stats callback. | 
|  | */ | 
|  | qedf_stats->tx_frames += fw_fcoe_stats->fcoe_tx_data_pkt_cnt + | 
|  | fw_fcoe_stats->fcoe_tx_xfer_pkt_cnt + | 
|  | fw_fcoe_stats->fcoe_tx_other_pkt_cnt; | 
|  | qedf_stats->rx_frames += fw_fcoe_stats->fcoe_rx_data_pkt_cnt + | 
|  | fw_fcoe_stats->fcoe_rx_xfer_pkt_cnt + | 
|  | fw_fcoe_stats->fcoe_rx_other_pkt_cnt; | 
|  | qedf_stats->fcp_input_megabytes += | 
|  | do_div(fw_fcoe_stats->fcoe_rx_byte_cnt, 1000000); | 
|  | qedf_stats->fcp_output_megabytes += | 
|  | do_div(fw_fcoe_stats->fcoe_tx_byte_cnt, 1000000); | 
|  | qedf_stats->rx_words += fw_fcoe_stats->fcoe_rx_byte_cnt / 4; | 
|  | qedf_stats->tx_words += fw_fcoe_stats->fcoe_tx_byte_cnt / 4; | 
|  | qedf_stats->invalid_crc_count += | 
|  | fw_fcoe_stats->fcoe_silent_drop_pkt_crc_error_cnt; | 
|  | qedf_stats->dumped_frames = | 
|  | fw_fcoe_stats->fcoe_silent_drop_total_pkt_cnt; | 
|  | qedf_stats->error_frames += | 
|  | fw_fcoe_stats->fcoe_silent_drop_total_pkt_cnt; | 
|  | qedf_stats->fcp_input_requests += qedf->input_requests; | 
|  | qedf_stats->fcp_output_requests += qedf->output_requests; | 
|  | qedf_stats->fcp_control_requests += qedf->control_requests; | 
|  | qedf_stats->fcp_packet_aborts += qedf->packet_aborts; | 
|  | qedf_stats->fcp_frame_alloc_failures += qedf->alloc_failures; | 
|  |  | 
|  | mutex_unlock(&qedf->stats_mutex); | 
|  | kfree(fw_fcoe_stats); | 
|  | out: | 
|  | return qedf_stats; | 
|  | } | 
|  |  | 
|  | static struct fc_function_template qedf_fc_transport_fn = { | 
|  | .show_host_node_name = 1, | 
|  | .show_host_port_name = 1, | 
|  | .show_host_supported_classes = 1, | 
|  | .show_host_supported_fc4s = 1, | 
|  | .show_host_active_fc4s = 1, | 
|  | .show_host_maxframe_size = 1, | 
|  |  | 
|  | .get_host_port_id = qedf_get_host_port_id, | 
|  | .show_host_port_id = 1, | 
|  | .show_host_supported_speeds = 1, | 
|  | .get_host_speed = fc_get_host_speed, | 
|  | .show_host_speed = 1, | 
|  | .show_host_port_type = 1, | 
|  | .get_host_port_state = fc_get_host_port_state, | 
|  | .show_host_port_state = 1, | 
|  | .show_host_symbolic_name = 1, | 
|  |  | 
|  | /* | 
|  | * Tell FC transport to allocate enough space to store the backpointer | 
|  | * for the associate qedf_rport struct. | 
|  | */ | 
|  | .dd_fcrport_size = (sizeof(struct fc_rport_libfc_priv) + | 
|  | sizeof(struct qedf_rport)), | 
|  | .show_rport_maxframe_size = 1, | 
|  | .show_rport_supported_classes = 1, | 
|  | .show_host_fabric_name = 1, | 
|  | .show_starget_node_name = 1, | 
|  | .show_starget_port_name = 1, | 
|  | .show_starget_port_id = 1, | 
|  | .set_rport_dev_loss_tmo = fc_set_rport_loss_tmo, | 
|  | .show_rport_dev_loss_tmo = 1, | 
|  | .get_fc_host_stats = qedf_fc_get_host_stats, | 
|  | .issue_fc_host_lip = qedf_fcoe_reset, | 
|  | .vport_create = qedf_vport_create, | 
|  | .vport_delete = qedf_vport_destroy, | 
|  | .vport_disable = qedf_vport_disable, | 
|  | .bsg_request = fc_lport_bsg_request, | 
|  | }; | 
|  |  | 
|  | static struct fc_function_template qedf_fc_vport_transport_fn = { | 
|  | .show_host_node_name = 1, | 
|  | .show_host_port_name = 1, | 
|  | .show_host_supported_classes = 1, | 
|  | .show_host_supported_fc4s = 1, | 
|  | .show_host_active_fc4s = 1, | 
|  | .show_host_maxframe_size = 1, | 
|  | .show_host_port_id = 1, | 
|  | .show_host_supported_speeds = 1, | 
|  | .get_host_speed = fc_get_host_speed, | 
|  | .show_host_speed = 1, | 
|  | .show_host_port_type = 1, | 
|  | .get_host_port_state = fc_get_host_port_state, | 
|  | .show_host_port_state = 1, | 
|  | .show_host_symbolic_name = 1, | 
|  | .dd_fcrport_size = (sizeof(struct fc_rport_libfc_priv) + | 
|  | sizeof(struct qedf_rport)), | 
|  | .show_rport_maxframe_size = 1, | 
|  | .show_rport_supported_classes = 1, | 
|  | .show_host_fabric_name = 1, | 
|  | .show_starget_node_name = 1, | 
|  | .show_starget_port_name = 1, | 
|  | .show_starget_port_id = 1, | 
|  | .set_rport_dev_loss_tmo = fc_set_rport_loss_tmo, | 
|  | .show_rport_dev_loss_tmo = 1, | 
|  | .get_fc_host_stats = fc_get_host_stats, | 
|  | .issue_fc_host_lip = qedf_fcoe_reset, | 
|  | .bsg_request = fc_lport_bsg_request, | 
|  | }; | 
|  |  | 
|  | static bool qedf_fp_has_work(struct qedf_fastpath *fp) | 
|  | { | 
|  | struct qedf_ctx *qedf = fp->qedf; | 
|  | struct global_queue *que; | 
|  | struct qed_sb_info *sb_info = fp->sb_info; | 
|  | struct status_block_e4 *sb = sb_info->sb_virt; | 
|  | u16 prod_idx; | 
|  |  | 
|  | /* Get the pointer to the global CQ this completion is on */ | 
|  | que = qedf->global_queues[fp->sb_id]; | 
|  |  | 
|  | /* Be sure all responses have been written to PI */ | 
|  | rmb(); | 
|  |  | 
|  | /* Get the current firmware producer index */ | 
|  | prod_idx = sb->pi_array[QEDF_FCOE_PARAMS_GL_RQ_PI]; | 
|  |  | 
|  | return (que->cq_prod_idx != prod_idx); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Interrupt handler code. | 
|  | */ | 
|  |  | 
|  | /* Process completion queue and copy CQE contents for deferred processesing | 
|  | * | 
|  | * Return true if we should wake the I/O thread, false if not. | 
|  | */ | 
|  | static bool qedf_process_completions(struct qedf_fastpath *fp) | 
|  | { | 
|  | struct qedf_ctx *qedf = fp->qedf; | 
|  | struct qed_sb_info *sb_info = fp->sb_info; | 
|  | struct status_block_e4 *sb = sb_info->sb_virt; | 
|  | struct global_queue *que; | 
|  | u16 prod_idx; | 
|  | struct fcoe_cqe *cqe; | 
|  | struct qedf_io_work *io_work; | 
|  | int num_handled = 0; | 
|  | unsigned int cpu; | 
|  | struct qedf_ioreq *io_req = NULL; | 
|  | u16 xid; | 
|  | u16 new_cqes; | 
|  | u32 comp_type; | 
|  |  | 
|  | /* Get the current firmware producer index */ | 
|  | prod_idx = sb->pi_array[QEDF_FCOE_PARAMS_GL_RQ_PI]; | 
|  |  | 
|  | /* Get the pointer to the global CQ this completion is on */ | 
|  | que = qedf->global_queues[fp->sb_id]; | 
|  |  | 
|  | /* Calculate the amount of new elements since last processing */ | 
|  | new_cqes = (prod_idx >= que->cq_prod_idx) ? | 
|  | (prod_idx - que->cq_prod_idx) : | 
|  | 0x10000 - que->cq_prod_idx + prod_idx; | 
|  |  | 
|  | /* Save producer index */ | 
|  | que->cq_prod_idx = prod_idx; | 
|  |  | 
|  | while (new_cqes) { | 
|  | fp->completions++; | 
|  | num_handled++; | 
|  | cqe = &que->cq[que->cq_cons_idx]; | 
|  |  | 
|  | comp_type = (cqe->cqe_data >> FCOE_CQE_CQE_TYPE_SHIFT) & | 
|  | FCOE_CQE_CQE_TYPE_MASK; | 
|  |  | 
|  | /* | 
|  | * Process unsolicited CQEs directly in the interrupt handler | 
|  | * sine we need the fastpath ID | 
|  | */ | 
|  | if (comp_type == FCOE_UNSOLIC_CQE_TYPE) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_UNSOL, | 
|  | "Unsolicated CQE.\n"); | 
|  | qedf_process_unsol_compl(qedf, fp->sb_id, cqe); | 
|  | /* | 
|  | * Don't add a work list item.  Increment consumer | 
|  | * consumer index and move on. | 
|  | */ | 
|  | goto inc_idx; | 
|  | } | 
|  |  | 
|  | xid = cqe->cqe_data & FCOE_CQE_TASK_ID_MASK; | 
|  | io_req = &qedf->cmd_mgr->cmds[xid]; | 
|  |  | 
|  | /* | 
|  | * Figure out which percpu thread we should queue this I/O | 
|  | * on. | 
|  | */ | 
|  | if (!io_req) | 
|  | /* If there is not io_req assocated with this CQE | 
|  | * just queue it on CPU 0 | 
|  | */ | 
|  | cpu = 0; | 
|  | else { | 
|  | cpu = io_req->cpu; | 
|  | io_req->int_cpu = smp_processor_id(); | 
|  | } | 
|  |  | 
|  | io_work = mempool_alloc(qedf->io_mempool, GFP_ATOMIC); | 
|  | if (!io_work) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate " | 
|  | "work for I/O completion.\n"); | 
|  | continue; | 
|  | } | 
|  | memset(io_work, 0, sizeof(struct qedf_io_work)); | 
|  |  | 
|  | INIT_WORK(&io_work->work, qedf_fp_io_handler); | 
|  |  | 
|  | /* Copy contents of CQE for deferred processing */ | 
|  | memcpy(&io_work->cqe, cqe, sizeof(struct fcoe_cqe)); | 
|  |  | 
|  | io_work->qedf = fp->qedf; | 
|  | io_work->fp = NULL; /* Only used for unsolicited frames */ | 
|  |  | 
|  | queue_work_on(cpu, qedf_io_wq, &io_work->work); | 
|  |  | 
|  | inc_idx: | 
|  | que->cq_cons_idx++; | 
|  | if (que->cq_cons_idx == fp->cq_num_entries) | 
|  | que->cq_cons_idx = 0; | 
|  | new_cqes--; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* MSI-X fastpath handler code */ | 
|  | static irqreturn_t qedf_msix_handler(int irq, void *dev_id) | 
|  | { | 
|  | struct qedf_fastpath *fp = dev_id; | 
|  |  | 
|  | if (!fp) { | 
|  | QEDF_ERR(NULL, "fp is null.\n"); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  | if (!fp->sb_info) { | 
|  | QEDF_ERR(NULL, "fp->sb_info in null."); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Disable interrupts for this status block while we process new | 
|  | * completions | 
|  | */ | 
|  | qed_sb_ack(fp->sb_info, IGU_INT_DISABLE, 0 /*do not update*/); | 
|  |  | 
|  | while (1) { | 
|  | qedf_process_completions(fp); | 
|  |  | 
|  | if (qedf_fp_has_work(fp) == 0) { | 
|  | /* Update the sb information */ | 
|  | qed_sb_update_sb_idx(fp->sb_info); | 
|  |  | 
|  | /* Check for more work */ | 
|  | rmb(); | 
|  |  | 
|  | if (qedf_fp_has_work(fp) == 0) { | 
|  | /* Re-enable interrupts */ | 
|  | qed_sb_ack(fp->sb_info, IGU_INT_ENABLE, 1); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Do we ever want to break out of above loop? */ | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* simd handler for MSI/INTa */ | 
|  | static void qedf_simd_int_handler(void *cookie) | 
|  | { | 
|  | /* Cookie is qedf_ctx struct */ | 
|  | struct qedf_ctx *qedf = (struct qedf_ctx *)cookie; | 
|  |  | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "qedf=%p.\n", qedf); | 
|  | } | 
|  |  | 
|  | #define QEDF_SIMD_HANDLER_NUM		0 | 
|  | static void qedf_sync_free_irqs(struct qedf_ctx *qedf) | 
|  | { | 
|  | int i; | 
|  | u16 vector_idx = 0; | 
|  | u32 vector; | 
|  |  | 
|  | if (qedf->int_info.msix_cnt) { | 
|  | for (i = 0; i < qedf->int_info.used_cnt; i++) { | 
|  | vector_idx = i * qedf->dev_info.common.num_hwfns + | 
|  | qed_ops->common->get_affin_hwfn_idx(qedf->cdev); | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "Freeing IRQ #%d vector_idx=%d.\n", | 
|  | i, vector_idx); | 
|  | vector = qedf->int_info.msix[vector_idx].vector; | 
|  | synchronize_irq(vector); | 
|  | irq_set_affinity_hint(vector, NULL); | 
|  | irq_set_affinity_notifier(vector, NULL); | 
|  | free_irq(vector, &qedf->fp_array[i]); | 
|  | } | 
|  | } else | 
|  | qed_ops->common->simd_handler_clean(qedf->cdev, | 
|  | QEDF_SIMD_HANDLER_NUM); | 
|  |  | 
|  | qedf->int_info.used_cnt = 0; | 
|  | qed_ops->common->set_fp_int(qedf->cdev, 0); | 
|  | } | 
|  |  | 
|  | static int qedf_request_msix_irq(struct qedf_ctx *qedf) | 
|  | { | 
|  | int i, rc, cpu; | 
|  | u16 vector_idx = 0; | 
|  | u32 vector; | 
|  |  | 
|  | cpu = cpumask_first(cpu_online_mask); | 
|  | for (i = 0; i < qedf->num_queues; i++) { | 
|  | vector_idx = i * qedf->dev_info.common.num_hwfns + | 
|  | qed_ops->common->get_affin_hwfn_idx(qedf->cdev); | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "Requesting IRQ #%d vector_idx=%d.\n", | 
|  | i, vector_idx); | 
|  | vector = qedf->int_info.msix[vector_idx].vector; | 
|  | rc = request_irq(vector, qedf_msix_handler, 0, "qedf", | 
|  | &qedf->fp_array[i]); | 
|  |  | 
|  | if (rc) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "request_irq failed.\n"); | 
|  | qedf_sync_free_irqs(qedf); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | qedf->int_info.used_cnt++; | 
|  | rc = irq_set_affinity_hint(vector, get_cpu_mask(cpu)); | 
|  | cpu = cpumask_next(cpu, cpu_online_mask); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qedf_setup_int(struct qedf_ctx *qedf) | 
|  | { | 
|  | int rc = 0; | 
|  |  | 
|  | /* | 
|  | * Learn interrupt configuration | 
|  | */ | 
|  | rc = qed_ops->common->set_fp_int(qedf->cdev, num_online_cpus()); | 
|  | if (rc <= 0) | 
|  | return 0; | 
|  |  | 
|  | rc  = qed_ops->common->get_fp_int(qedf->cdev, &qedf->int_info); | 
|  | if (rc) | 
|  | return 0; | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "Number of msix_cnt = " | 
|  | "0x%x num of cpus = 0x%x\n", qedf->int_info.msix_cnt, | 
|  | num_online_cpus()); | 
|  |  | 
|  | if (qedf->int_info.msix_cnt) | 
|  | return qedf_request_msix_irq(qedf); | 
|  |  | 
|  | qed_ops->common->simd_handler_config(qedf->cdev, &qedf, | 
|  | QEDF_SIMD_HANDLER_NUM, qedf_simd_int_handler); | 
|  | qedf->int_info.used_cnt = 1; | 
|  |  | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Cannot load driver due to a lack of MSI-X vectors.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Main function for libfc frame reception */ | 
|  | static void qedf_recv_frame(struct qedf_ctx *qedf, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | u32 fr_len; | 
|  | struct fc_lport *lport; | 
|  | struct fc_frame_header *fh; | 
|  | struct fcoe_crc_eof crc_eof; | 
|  | struct fc_frame *fp; | 
|  | u8 *mac = NULL; | 
|  | u8 *dest_mac = NULL; | 
|  | struct fcoe_hdr *hp; | 
|  | struct qedf_rport *fcport; | 
|  | struct fc_lport *vn_port; | 
|  | u32 f_ctl; | 
|  |  | 
|  | lport = qedf->lport; | 
|  | if (lport == NULL || lport->state == LPORT_ST_DISABLED) { | 
|  | QEDF_WARN(NULL, "Invalid lport struct or lport disabled.\n"); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (skb_is_nonlinear(skb)) | 
|  | skb_linearize(skb); | 
|  | mac = eth_hdr(skb)->h_source; | 
|  | dest_mac = eth_hdr(skb)->h_dest; | 
|  |  | 
|  | /* Pull the header */ | 
|  | hp = (struct fcoe_hdr *)skb->data; | 
|  | fh = (struct fc_frame_header *) skb_transport_header(skb); | 
|  | skb_pull(skb, sizeof(struct fcoe_hdr)); | 
|  | fr_len = skb->len - sizeof(struct fcoe_crc_eof); | 
|  |  | 
|  | fp = (struct fc_frame *)skb; | 
|  | fc_frame_init(fp); | 
|  | fr_dev(fp) = lport; | 
|  | fr_sof(fp) = hp->fcoe_sof; | 
|  | if (skb_copy_bits(skb, fr_len, &crc_eof, sizeof(crc_eof))) { | 
|  | QEDF_INFO(NULL, QEDF_LOG_LL2, "skb_copy_bits failed.\n"); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  | fr_eof(fp) = crc_eof.fcoe_eof; | 
|  | fr_crc(fp) = crc_eof.fcoe_crc32; | 
|  | if (pskb_trim(skb, fr_len)) { | 
|  | QEDF_INFO(NULL, QEDF_LOG_LL2, "pskb_trim failed.\n"); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | fh = fc_frame_header_get(fp); | 
|  |  | 
|  | /* | 
|  | * Invalid frame filters. | 
|  | */ | 
|  |  | 
|  | if (fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA && | 
|  | fh->fh_type == FC_TYPE_FCP) { | 
|  | /* Drop FCP data. We dont this in L2 path */ | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  | if (fh->fh_r_ctl == FC_RCTL_ELS_REQ && | 
|  | fh->fh_type == FC_TYPE_ELS) { | 
|  | switch (fc_frame_payload_op(fp)) { | 
|  | case ELS_LOGO: | 
|  | if (ntoh24(fh->fh_s_id) == FC_FID_FLOGI) { | 
|  | /* drop non-FIP LOGO */ | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (fh->fh_r_ctl == FC_RCTL_BA_ABTS) { | 
|  | /* Drop incoming ABTS */ | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (ntoh24(&dest_mac[3]) != ntoh24(fh->fh_d_id)) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_LL2, | 
|  | "FC frame d_id mismatch with MAC %pM.\n", dest_mac); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (qedf->ctlr.state) { | 
|  | if (!ether_addr_equal(mac, qedf->ctlr.dest_addr)) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_LL2, | 
|  | "Wrong source address: mac:%pM dest_addr:%pM.\n", | 
|  | mac, qedf->ctlr.dest_addr); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | vn_port = fc_vport_id_lookup(lport, ntoh24(fh->fh_d_id)); | 
|  |  | 
|  | /* | 
|  | * If the destination ID from the frame header does not match what we | 
|  | * have on record for lport and the search for a NPIV port came up | 
|  | * empty then this is not addressed to our port so simply drop it. | 
|  | */ | 
|  | if (lport->port_id != ntoh24(fh->fh_d_id) && !vn_port) { | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_LL2, | 
|  | "Dropping frame due to destination mismatch: lport->port_id=0x%x fh->d_id=0x%x.\n", | 
|  | lport->port_id, ntoh24(fh->fh_d_id)); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | f_ctl = ntoh24(fh->fh_f_ctl); | 
|  | if ((fh->fh_type == FC_TYPE_BLS) && (f_ctl & FC_FC_SEQ_CTX) && | 
|  | (f_ctl & FC_FC_EX_CTX)) { | 
|  | /* Drop incoming ABTS response that has both SEQ/EX CTX set */ | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_LL2, | 
|  | "Dropping ABTS response as both SEQ/EX CTX set.\n"); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If a connection is uploading, drop incoming FCoE frames as there | 
|  | * is a small window where we could try to return a frame while libfc | 
|  | * is trying to clean things up. | 
|  | */ | 
|  |  | 
|  | /* Get fcport associated with d_id if it exists */ | 
|  | fcport = qedf_fcport_lookup(qedf, ntoh24(fh->fh_d_id)); | 
|  |  | 
|  | if (fcport && test_bit(QEDF_RPORT_UPLOADING_CONNECTION, | 
|  | &fcport->flags)) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_LL2, | 
|  | "Connection uploading, dropping fp=%p.\n", fp); | 
|  | kfree_skb(skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_LL2, "FCoE frame receive: " | 
|  | "skb=%p fp=%p src=%06x dest=%06x r_ctl=%x fh_type=%x.\n", skb, fp, | 
|  | ntoh24(fh->fh_s_id), ntoh24(fh->fh_d_id), fh->fh_r_ctl, | 
|  | fh->fh_type); | 
|  | if (qedf_dump_frames) | 
|  | print_hex_dump(KERN_WARNING, "fcoe: ", DUMP_PREFIX_OFFSET, 16, | 
|  | 1, skb->data, skb->len, false); | 
|  | fc_exch_recv(lport, fp); | 
|  | } | 
|  |  | 
|  | static void qedf_ll2_process_skb(struct work_struct *work) | 
|  | { | 
|  | struct qedf_skb_work *skb_work = | 
|  | container_of(work, struct qedf_skb_work, work); | 
|  | struct qedf_ctx *qedf = skb_work->qedf; | 
|  | struct sk_buff *skb = skb_work->skb; | 
|  | struct ethhdr *eh; | 
|  |  | 
|  | if (!qedf) { | 
|  | QEDF_ERR(NULL, "qedf is NULL\n"); | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | eh = (struct ethhdr *)skb->data; | 
|  |  | 
|  | /* Undo VLAN encapsulation */ | 
|  | if (eh->h_proto == htons(ETH_P_8021Q)) { | 
|  | memmove((u8 *)eh + VLAN_HLEN, eh, ETH_ALEN * 2); | 
|  | eh = skb_pull(skb, VLAN_HLEN); | 
|  | skb_reset_mac_header(skb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Process either a FIP frame or FCoE frame based on the | 
|  | * protocol value.  If it's not either just drop the | 
|  | * frame. | 
|  | */ | 
|  | if (eh->h_proto == htons(ETH_P_FIP)) { | 
|  | qedf_fip_recv(qedf, skb); | 
|  | goto out; | 
|  | } else if (eh->h_proto == htons(ETH_P_FCOE)) { | 
|  | __skb_pull(skb, ETH_HLEN); | 
|  | qedf_recv_frame(qedf, skb); | 
|  | goto out; | 
|  | } else | 
|  | goto err_out; | 
|  |  | 
|  | err_out: | 
|  | kfree_skb(skb); | 
|  | out: | 
|  | kfree(skb_work); | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int qedf_ll2_rx(void *cookie, struct sk_buff *skb, | 
|  | u32 arg1, u32 arg2) | 
|  | { | 
|  | struct qedf_ctx *qedf = (struct qedf_ctx *)cookie; | 
|  | struct qedf_skb_work *skb_work; | 
|  |  | 
|  | if (atomic_read(&qedf->link_state) == QEDF_LINK_DOWN) { | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_LL2, | 
|  | "Dropping frame as link state is down.\n"); | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | skb_work = kzalloc(sizeof(struct qedf_skb_work), GFP_ATOMIC); | 
|  | if (!skb_work) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate skb_work so " | 
|  | "dropping frame.\n"); | 
|  | kfree_skb(skb); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | INIT_WORK(&skb_work->work, qedf_ll2_process_skb); | 
|  | skb_work->skb = skb; | 
|  | skb_work->qedf = qedf; | 
|  | queue_work(qedf->ll2_recv_wq, &skb_work->work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct qed_ll2_cb_ops qedf_ll2_cb_ops = { | 
|  | .rx_cb = qedf_ll2_rx, | 
|  | .tx_cb = NULL, | 
|  | }; | 
|  |  | 
|  | /* Main thread to process I/O completions */ | 
|  | void qedf_fp_io_handler(struct work_struct *work) | 
|  | { | 
|  | struct qedf_io_work *io_work = | 
|  | container_of(work, struct qedf_io_work, work); | 
|  | u32 comp_type; | 
|  |  | 
|  | /* | 
|  | * Deferred part of unsolicited CQE sends | 
|  | * frame to libfc. | 
|  | */ | 
|  | comp_type = (io_work->cqe.cqe_data >> | 
|  | FCOE_CQE_CQE_TYPE_SHIFT) & | 
|  | FCOE_CQE_CQE_TYPE_MASK; | 
|  | if (comp_type == FCOE_UNSOLIC_CQE_TYPE && | 
|  | io_work->fp) | 
|  | fc_exch_recv(io_work->qedf->lport, io_work->fp); | 
|  | else | 
|  | qedf_process_cqe(io_work->qedf, &io_work->cqe); | 
|  |  | 
|  | kfree(io_work); | 
|  | } | 
|  |  | 
|  | static int qedf_alloc_and_init_sb(struct qedf_ctx *qedf, | 
|  | struct qed_sb_info *sb_info, u16 sb_id) | 
|  | { | 
|  | struct status_block_e4 *sb_virt; | 
|  | dma_addr_t sb_phys; | 
|  | int ret; | 
|  |  | 
|  | sb_virt = dma_alloc_coherent(&qedf->pdev->dev, | 
|  | sizeof(struct status_block_e4), &sb_phys, GFP_KERNEL); | 
|  |  | 
|  | if (!sb_virt) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Status block allocation failed for id = %d.\n", | 
|  | sb_id); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ret = qed_ops->common->sb_init(qedf->cdev, sb_info, sb_virt, sb_phys, | 
|  | sb_id, QED_SB_TYPE_STORAGE); | 
|  |  | 
|  | if (ret) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Status block initialization failed (0x%x) for id = %d.\n", | 
|  | ret, sb_id); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void qedf_free_sb(struct qedf_ctx *qedf, struct qed_sb_info *sb_info) | 
|  | { | 
|  | if (sb_info->sb_virt) | 
|  | dma_free_coherent(&qedf->pdev->dev, sizeof(*sb_info->sb_virt), | 
|  | (void *)sb_info->sb_virt, sb_info->sb_phys); | 
|  | } | 
|  |  | 
|  | static void qedf_destroy_sb(struct qedf_ctx *qedf) | 
|  | { | 
|  | int id; | 
|  | struct qedf_fastpath *fp = NULL; | 
|  |  | 
|  | for (id = 0; id < qedf->num_queues; id++) { | 
|  | fp = &(qedf->fp_array[id]); | 
|  | if (fp->sb_id == QEDF_SB_ID_NULL) | 
|  | break; | 
|  | qedf_free_sb(qedf, fp->sb_info); | 
|  | kfree(fp->sb_info); | 
|  | } | 
|  | kfree(qedf->fp_array); | 
|  | } | 
|  |  | 
|  | static int qedf_prepare_sb(struct qedf_ctx *qedf) | 
|  | { | 
|  | int id; | 
|  | struct qedf_fastpath *fp; | 
|  | int ret; | 
|  |  | 
|  | qedf->fp_array = | 
|  | kcalloc(qedf->num_queues, sizeof(struct qedf_fastpath), | 
|  | GFP_KERNEL); | 
|  |  | 
|  | if (!qedf->fp_array) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "fastpath array allocation " | 
|  | "failed.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | for (id = 0; id < qedf->num_queues; id++) { | 
|  | fp = &(qedf->fp_array[id]); | 
|  | fp->sb_id = QEDF_SB_ID_NULL; | 
|  | fp->sb_info = kcalloc(1, sizeof(*fp->sb_info), GFP_KERNEL); | 
|  | if (!fp->sb_info) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "SB info struct " | 
|  | "allocation failed.\n"); | 
|  | goto err; | 
|  | } | 
|  | ret = qedf_alloc_and_init_sb(qedf, fp->sb_info, id); | 
|  | if (ret) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "SB allocation and " | 
|  | "initialization failed.\n"); | 
|  | goto err; | 
|  | } | 
|  | fp->sb_id = id; | 
|  | fp->qedf = qedf; | 
|  | fp->cq_num_entries = | 
|  | qedf->global_queues[id]->cq_mem_size / | 
|  | sizeof(struct fcoe_cqe); | 
|  | } | 
|  | err: | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void qedf_process_cqe(struct qedf_ctx *qedf, struct fcoe_cqe *cqe) | 
|  | { | 
|  | u16 xid; | 
|  | struct qedf_ioreq *io_req; | 
|  | struct qedf_rport *fcport; | 
|  | u32 comp_type; | 
|  |  | 
|  | comp_type = (cqe->cqe_data >> FCOE_CQE_CQE_TYPE_SHIFT) & | 
|  | FCOE_CQE_CQE_TYPE_MASK; | 
|  |  | 
|  | xid = cqe->cqe_data & FCOE_CQE_TASK_ID_MASK; | 
|  | io_req = &qedf->cmd_mgr->cmds[xid]; | 
|  |  | 
|  | /* Completion not for a valid I/O anymore so just return */ | 
|  | if (!io_req) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "io_req is NULL for xid=0x%x.\n", xid); | 
|  | return; | 
|  | } | 
|  |  | 
|  | fcport = io_req->fcport; | 
|  |  | 
|  | if (fcport == NULL) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "fcport is NULL for xid=0x%x io_req=%p.\n", | 
|  | xid, io_req); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check that fcport is offloaded.  If it isn't then the spinlock | 
|  | * isn't valid and shouldn't be taken. We should just return. | 
|  | */ | 
|  | if (!test_bit(QEDF_RPORT_SESSION_READY, &fcport->flags)) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, | 
|  | "Session not offloaded yet, fcport = %p.\n", fcport); | 
|  | return; | 
|  | } | 
|  |  | 
|  |  | 
|  | switch (comp_type) { | 
|  | case FCOE_GOOD_COMPLETION_CQE_TYPE: | 
|  | atomic_inc(&fcport->free_sqes); | 
|  | switch (io_req->cmd_type) { | 
|  | case QEDF_SCSI_CMD: | 
|  | qedf_scsi_completion(qedf, cqe, io_req); | 
|  | break; | 
|  | case QEDF_ELS: | 
|  | qedf_process_els_compl(qedf, cqe, io_req); | 
|  | break; | 
|  | case QEDF_TASK_MGMT_CMD: | 
|  | qedf_process_tmf_compl(qedf, cqe, io_req); | 
|  | break; | 
|  | case QEDF_SEQ_CLEANUP: | 
|  | qedf_process_seq_cleanup_compl(qedf, cqe, io_req); | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case FCOE_ERROR_DETECTION_CQE_TYPE: | 
|  | atomic_inc(&fcport->free_sqes); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_IO, | 
|  | "Error detect CQE.\n"); | 
|  | qedf_process_error_detect(qedf, cqe, io_req); | 
|  | break; | 
|  | case FCOE_EXCH_CLEANUP_CQE_TYPE: | 
|  | atomic_inc(&fcport->free_sqes); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_IO, | 
|  | "Cleanup CQE.\n"); | 
|  | qedf_process_cleanup_compl(qedf, cqe, io_req); | 
|  | break; | 
|  | case FCOE_ABTS_CQE_TYPE: | 
|  | atomic_inc(&fcport->free_sqes); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_IO, | 
|  | "Abort CQE.\n"); | 
|  | qedf_process_abts_compl(qedf, cqe, io_req); | 
|  | break; | 
|  | case FCOE_DUMMY_CQE_TYPE: | 
|  | atomic_inc(&fcport->free_sqes); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_IO, | 
|  | "Dummy CQE.\n"); | 
|  | break; | 
|  | case FCOE_LOCAL_COMP_CQE_TYPE: | 
|  | atomic_inc(&fcport->free_sqes); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_IO, | 
|  | "Local completion CQE.\n"); | 
|  | break; | 
|  | case FCOE_WARNING_CQE_TYPE: | 
|  | atomic_inc(&fcport->free_sqes); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_IO, | 
|  | "Warning CQE.\n"); | 
|  | qedf_process_warning_compl(qedf, cqe, io_req); | 
|  | break; | 
|  | case MAX_FCOE_CQE_TYPE: | 
|  | atomic_inc(&fcport->free_sqes); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_IO, | 
|  | "Max FCoE CQE.\n"); | 
|  | break; | 
|  | default: | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_IO, | 
|  | "Default CQE.\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qedf_free_bdq(struct qedf_ctx *qedf) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (qedf->bdq_pbl_list) | 
|  | dma_free_coherent(&qedf->pdev->dev, QEDF_PAGE_SIZE, | 
|  | qedf->bdq_pbl_list, qedf->bdq_pbl_list_dma); | 
|  |  | 
|  | if (qedf->bdq_pbl) | 
|  | dma_free_coherent(&qedf->pdev->dev, qedf->bdq_pbl_mem_size, | 
|  | qedf->bdq_pbl, qedf->bdq_pbl_dma); | 
|  |  | 
|  | for (i = 0; i < QEDF_BDQ_SIZE; i++) { | 
|  | if (qedf->bdq[i].buf_addr) { | 
|  | dma_free_coherent(&qedf->pdev->dev, QEDF_BDQ_BUF_SIZE, | 
|  | qedf->bdq[i].buf_addr, qedf->bdq[i].buf_dma); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void qedf_free_global_queues(struct qedf_ctx *qedf) | 
|  | { | 
|  | int i; | 
|  | struct global_queue **gl = qedf->global_queues; | 
|  |  | 
|  | for (i = 0; i < qedf->num_queues; i++) { | 
|  | if (!gl[i]) | 
|  | continue; | 
|  |  | 
|  | if (gl[i]->cq) | 
|  | dma_free_coherent(&qedf->pdev->dev, | 
|  | gl[i]->cq_mem_size, gl[i]->cq, gl[i]->cq_dma); | 
|  | if (gl[i]->cq_pbl) | 
|  | dma_free_coherent(&qedf->pdev->dev, gl[i]->cq_pbl_size, | 
|  | gl[i]->cq_pbl, gl[i]->cq_pbl_dma); | 
|  |  | 
|  | kfree(gl[i]); | 
|  | } | 
|  |  | 
|  | qedf_free_bdq(qedf); | 
|  | } | 
|  |  | 
|  | static int qedf_alloc_bdq(struct qedf_ctx *qedf) | 
|  | { | 
|  | int i; | 
|  | struct scsi_bd *pbl; | 
|  | u64 *list; | 
|  | dma_addr_t page; | 
|  |  | 
|  | /* Alloc dma memory for BDQ buffers */ | 
|  | for (i = 0; i < QEDF_BDQ_SIZE; i++) { | 
|  | qedf->bdq[i].buf_addr = dma_alloc_coherent(&qedf->pdev->dev, | 
|  | QEDF_BDQ_BUF_SIZE, &qedf->bdq[i].buf_dma, GFP_KERNEL); | 
|  | if (!qedf->bdq[i].buf_addr) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Could not allocate BDQ " | 
|  | "buffer %d.\n", i); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Alloc dma memory for BDQ page buffer list */ | 
|  | qedf->bdq_pbl_mem_size = | 
|  | QEDF_BDQ_SIZE * sizeof(struct scsi_bd); | 
|  | qedf->bdq_pbl_mem_size = | 
|  | ALIGN(qedf->bdq_pbl_mem_size, QEDF_PAGE_SIZE); | 
|  |  | 
|  | qedf->bdq_pbl = dma_alloc_coherent(&qedf->pdev->dev, | 
|  | qedf->bdq_pbl_mem_size, &qedf->bdq_pbl_dma, GFP_KERNEL); | 
|  | if (!qedf->bdq_pbl) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Could not allocate BDQ PBL.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "BDQ PBL addr=0x%p dma=%pad\n", | 
|  | qedf->bdq_pbl, &qedf->bdq_pbl_dma); | 
|  |  | 
|  | /* | 
|  | * Populate BDQ PBL with physical and virtual address of individual | 
|  | * BDQ buffers | 
|  | */ | 
|  | pbl = (struct scsi_bd *)qedf->bdq_pbl; | 
|  | for (i = 0; i < QEDF_BDQ_SIZE; i++) { | 
|  | pbl->address.hi = cpu_to_le32(U64_HI(qedf->bdq[i].buf_dma)); | 
|  | pbl->address.lo = cpu_to_le32(U64_LO(qedf->bdq[i].buf_dma)); | 
|  | pbl->opaque.fcoe_opaque.hi = 0; | 
|  | /* Opaque lo data is an index into the BDQ array */ | 
|  | pbl->opaque.fcoe_opaque.lo = cpu_to_le32(i); | 
|  | pbl++; | 
|  | } | 
|  |  | 
|  | /* Allocate list of PBL pages */ | 
|  | qedf->bdq_pbl_list = dma_alloc_coherent(&qedf->pdev->dev, | 
|  | QEDF_PAGE_SIZE, | 
|  | &qedf->bdq_pbl_list_dma, | 
|  | GFP_KERNEL); | 
|  | if (!qedf->bdq_pbl_list) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Could not allocate list of PBL pages.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Now populate PBL list with pages that contain pointers to the | 
|  | * individual buffers. | 
|  | */ | 
|  | qedf->bdq_pbl_list_num_entries = qedf->bdq_pbl_mem_size / | 
|  | QEDF_PAGE_SIZE; | 
|  | list = (u64 *)qedf->bdq_pbl_list; | 
|  | page = qedf->bdq_pbl_list_dma; | 
|  | for (i = 0; i < qedf->bdq_pbl_list_num_entries; i++) { | 
|  | *list = qedf->bdq_pbl_dma; | 
|  | list++; | 
|  | page += QEDF_PAGE_SIZE; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int qedf_alloc_global_queues(struct qedf_ctx *qedf) | 
|  | { | 
|  | u32 *list; | 
|  | int i; | 
|  | int status = 0, rc; | 
|  | u32 *pbl; | 
|  | dma_addr_t page; | 
|  | int num_pages; | 
|  |  | 
|  | /* Allocate and map CQs, RQs */ | 
|  | /* | 
|  | * Number of global queues (CQ / RQ). This should | 
|  | * be <= number of available MSIX vectors for the PF | 
|  | */ | 
|  | if (!qedf->num_queues) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "No MSI-X vectors available!\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Make sure we allocated the PBL that will contain the physical | 
|  | * addresses of our queues | 
|  | */ | 
|  | if (!qedf->p_cpuq) { | 
|  | status = 1; | 
|  | QEDF_ERR(&qedf->dbg_ctx, "p_cpuq is NULL.\n"); | 
|  | goto mem_alloc_failure; | 
|  | } | 
|  |  | 
|  | qedf->global_queues = kzalloc((sizeof(struct global_queue *) | 
|  | * qedf->num_queues), GFP_KERNEL); | 
|  | if (!qedf->global_queues) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Unable to allocate global " | 
|  | "queues array ptr memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "qedf->global_queues=%p.\n", qedf->global_queues); | 
|  |  | 
|  | /* Allocate DMA coherent buffers for BDQ */ | 
|  | rc = qedf_alloc_bdq(qedf); | 
|  | if (rc) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "Unable to allocate bdq.\n"); | 
|  | goto mem_alloc_failure; | 
|  | } | 
|  |  | 
|  | /* Allocate a CQ and an associated PBL for each MSI-X vector */ | 
|  | for (i = 0; i < qedf->num_queues; i++) { | 
|  | qedf->global_queues[i] = kzalloc(sizeof(struct global_queue), | 
|  | GFP_KERNEL); | 
|  | if (!qedf->global_queues[i]) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Unable to allocate " | 
|  | "global queue %d.\n", i); | 
|  | status = -ENOMEM; | 
|  | goto mem_alloc_failure; | 
|  | } | 
|  |  | 
|  | qedf->global_queues[i]->cq_mem_size = | 
|  | FCOE_PARAMS_CQ_NUM_ENTRIES * sizeof(struct fcoe_cqe); | 
|  | qedf->global_queues[i]->cq_mem_size = | 
|  | ALIGN(qedf->global_queues[i]->cq_mem_size, QEDF_PAGE_SIZE); | 
|  |  | 
|  | qedf->global_queues[i]->cq_pbl_size = | 
|  | (qedf->global_queues[i]->cq_mem_size / | 
|  | PAGE_SIZE) * sizeof(void *); | 
|  | qedf->global_queues[i]->cq_pbl_size = | 
|  | ALIGN(qedf->global_queues[i]->cq_pbl_size, QEDF_PAGE_SIZE); | 
|  |  | 
|  | qedf->global_queues[i]->cq = | 
|  | dma_alloc_coherent(&qedf->pdev->dev, | 
|  | qedf->global_queues[i]->cq_mem_size, | 
|  | &qedf->global_queues[i]->cq_dma, | 
|  | GFP_KERNEL); | 
|  |  | 
|  | if (!qedf->global_queues[i]->cq) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate cq.\n"); | 
|  | status = -ENOMEM; | 
|  | goto mem_alloc_failure; | 
|  | } | 
|  |  | 
|  | qedf->global_queues[i]->cq_pbl = | 
|  | dma_alloc_coherent(&qedf->pdev->dev, | 
|  | qedf->global_queues[i]->cq_pbl_size, | 
|  | &qedf->global_queues[i]->cq_pbl_dma, | 
|  | GFP_KERNEL); | 
|  |  | 
|  | if (!qedf->global_queues[i]->cq_pbl) { | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "Could not allocate cq PBL.\n"); | 
|  | status = -ENOMEM; | 
|  | goto mem_alloc_failure; | 
|  | } | 
|  |  | 
|  | /* Create PBL */ | 
|  | num_pages = qedf->global_queues[i]->cq_mem_size / | 
|  | QEDF_PAGE_SIZE; | 
|  | page = qedf->global_queues[i]->cq_dma; | 
|  | pbl = (u32 *)qedf->global_queues[i]->cq_pbl; | 
|  |  | 
|  | while (num_pages--) { | 
|  | *pbl = U64_LO(page); | 
|  | pbl++; | 
|  | *pbl = U64_HI(page); | 
|  | pbl++; | 
|  | page += QEDF_PAGE_SIZE; | 
|  | } | 
|  | /* Set the initial consumer index for cq */ | 
|  | qedf->global_queues[i]->cq_cons_idx = 0; | 
|  | } | 
|  |  | 
|  | list = (u32 *)qedf->p_cpuq; | 
|  |  | 
|  | /* | 
|  | * The list is built as follows: CQ#0 PBL pointer, RQ#0 PBL pointer, | 
|  | * CQ#1 PBL pointer, RQ#1 PBL pointer, etc.  Each PBL pointer points | 
|  | * to the physical address which contains an array of pointers to | 
|  | * the physical addresses of the specific queue pages. | 
|  | */ | 
|  | for (i = 0; i < qedf->num_queues; i++) { | 
|  | *list = U64_LO(qedf->global_queues[i]->cq_pbl_dma); | 
|  | list++; | 
|  | *list = U64_HI(qedf->global_queues[i]->cq_pbl_dma); | 
|  | list++; | 
|  | *list = U64_LO(0); | 
|  | list++; | 
|  | *list = U64_HI(0); | 
|  | list++; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | mem_alloc_failure: | 
|  | qedf_free_global_queues(qedf); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int qedf_set_fcoe_pf_param(struct qedf_ctx *qedf) | 
|  | { | 
|  | u8 sq_num_pbl_pages; | 
|  | u32 sq_mem_size; | 
|  | u32 cq_mem_size; | 
|  | u32 cq_num_entries; | 
|  | int rval; | 
|  |  | 
|  | /* | 
|  | * The number of completion queues/fastpath interrupts/status blocks | 
|  | * we allocation is the minimum off: | 
|  | * | 
|  | * Number of CPUs | 
|  | * Number allocated by qed for our PCI function | 
|  | */ | 
|  | qedf->num_queues = MIN_NUM_CPUS_MSIX(qedf); | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "Number of CQs is %d.\n", | 
|  | qedf->num_queues); | 
|  |  | 
|  | qedf->p_cpuq = dma_alloc_coherent(&qedf->pdev->dev, | 
|  | qedf->num_queues * sizeof(struct qedf_glbl_q_params), | 
|  | &qedf->hw_p_cpuq, GFP_KERNEL); | 
|  |  | 
|  | if (!qedf->p_cpuq) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "dma_alloc_coherent failed.\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | rval = qedf_alloc_global_queues(qedf); | 
|  | if (rval) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Global queue allocation " | 
|  | "failed.\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* Calculate SQ PBL size in the same manner as in qedf_sq_alloc() */ | 
|  | sq_mem_size = SQ_NUM_ENTRIES * sizeof(struct fcoe_wqe); | 
|  | sq_mem_size = ALIGN(sq_mem_size, QEDF_PAGE_SIZE); | 
|  | sq_num_pbl_pages = (sq_mem_size / QEDF_PAGE_SIZE); | 
|  |  | 
|  | /* Calculate CQ num entries */ | 
|  | cq_mem_size = FCOE_PARAMS_CQ_NUM_ENTRIES * sizeof(struct fcoe_cqe); | 
|  | cq_mem_size = ALIGN(cq_mem_size, QEDF_PAGE_SIZE); | 
|  | cq_num_entries = cq_mem_size / sizeof(struct fcoe_cqe); | 
|  |  | 
|  | memset(&(qedf->pf_params), 0, sizeof(qedf->pf_params)); | 
|  |  | 
|  | /* Setup the value for fcoe PF */ | 
|  | qedf->pf_params.fcoe_pf_params.num_cons = QEDF_MAX_SESSIONS; | 
|  | qedf->pf_params.fcoe_pf_params.num_tasks = FCOE_PARAMS_NUM_TASKS; | 
|  | qedf->pf_params.fcoe_pf_params.glbl_q_params_addr = | 
|  | (u64)qedf->hw_p_cpuq; | 
|  | qedf->pf_params.fcoe_pf_params.sq_num_pbl_pages = sq_num_pbl_pages; | 
|  |  | 
|  | qedf->pf_params.fcoe_pf_params.rq_buffer_log_size = 0; | 
|  |  | 
|  | qedf->pf_params.fcoe_pf_params.cq_num_entries = cq_num_entries; | 
|  | qedf->pf_params.fcoe_pf_params.num_cqs = qedf->num_queues; | 
|  |  | 
|  | /* log_page_size: 12 for 4KB pages */ | 
|  | qedf->pf_params.fcoe_pf_params.log_page_size = ilog2(QEDF_PAGE_SIZE); | 
|  |  | 
|  | qedf->pf_params.fcoe_pf_params.mtu = 9000; | 
|  | qedf->pf_params.fcoe_pf_params.gl_rq_pi = QEDF_FCOE_PARAMS_GL_RQ_PI; | 
|  | qedf->pf_params.fcoe_pf_params.gl_cmd_pi = QEDF_FCOE_PARAMS_GL_CMD_PI; | 
|  |  | 
|  | /* BDQ address and size */ | 
|  | qedf->pf_params.fcoe_pf_params.bdq_pbl_base_addr[0] = | 
|  | qedf->bdq_pbl_list_dma; | 
|  | qedf->pf_params.fcoe_pf_params.bdq_pbl_num_entries[0] = | 
|  | qedf->bdq_pbl_list_num_entries; | 
|  | qedf->pf_params.fcoe_pf_params.rq_buffer_size = QEDF_BDQ_BUF_SIZE; | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "bdq_list=%p bdq_pbl_list_dma=%llx bdq_pbl_list_entries=%d.\n", | 
|  | qedf->bdq_pbl_list, | 
|  | qedf->pf_params.fcoe_pf_params.bdq_pbl_base_addr[0], | 
|  | qedf->pf_params.fcoe_pf_params.bdq_pbl_num_entries[0]); | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "cq_num_entries=%d.\n", | 
|  | qedf->pf_params.fcoe_pf_params.cq_num_entries); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Free DMA coherent memory for array of queue pointers we pass to qed */ | 
|  | static void qedf_free_fcoe_pf_param(struct qedf_ctx *qedf) | 
|  | { | 
|  | size_t size = 0; | 
|  |  | 
|  | if (qedf->p_cpuq) { | 
|  | size = qedf->num_queues * sizeof(struct qedf_glbl_q_params); | 
|  | dma_free_coherent(&qedf->pdev->dev, size, qedf->p_cpuq, | 
|  | qedf->hw_p_cpuq); | 
|  | } | 
|  |  | 
|  | qedf_free_global_queues(qedf); | 
|  |  | 
|  | kfree(qedf->global_queues); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * PCI driver functions | 
|  | */ | 
|  |  | 
|  | static const struct pci_device_id qedf_pci_tbl[] = { | 
|  | { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, 0x165c) }, | 
|  | { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, 0x8080) }, | 
|  | {0} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, qedf_pci_tbl); | 
|  |  | 
|  | static struct pci_driver qedf_pci_driver = { | 
|  | .name = QEDF_MODULE_NAME, | 
|  | .id_table = qedf_pci_tbl, | 
|  | .probe = qedf_probe, | 
|  | .remove = qedf_remove, | 
|  | .shutdown = qedf_shutdown, | 
|  | }; | 
|  |  | 
|  | static int __qedf_probe(struct pci_dev *pdev, int mode) | 
|  | { | 
|  | int rc = -EINVAL; | 
|  | struct fc_lport *lport; | 
|  | struct qedf_ctx *qedf; | 
|  | struct Scsi_Host *host; | 
|  | bool is_vf = false; | 
|  | struct qed_ll2_params params; | 
|  | char host_buf[20]; | 
|  | struct qed_link_params link_params; | 
|  | int status; | 
|  | void *task_start, *task_end; | 
|  | struct qed_slowpath_params slowpath_params; | 
|  | struct qed_probe_params qed_params; | 
|  | u16 tmp; | 
|  |  | 
|  | /* | 
|  | * When doing error recovery we didn't reap the lport so don't try | 
|  | * to reallocate it. | 
|  | */ | 
|  | if (mode != QEDF_MODE_RECOVERY) { | 
|  | lport = libfc_host_alloc(&qedf_host_template, | 
|  | sizeof(struct qedf_ctx)); | 
|  |  | 
|  | if (!lport) { | 
|  | QEDF_ERR(NULL, "Could not allocate lport.\n"); | 
|  | rc = -ENOMEM; | 
|  | goto err0; | 
|  | } | 
|  |  | 
|  | fc_disc_init(lport); | 
|  |  | 
|  | /* Initialize qedf_ctx */ | 
|  | qedf = lport_priv(lport); | 
|  | qedf->lport = lport; | 
|  | qedf->ctlr.lp = lport; | 
|  | qedf->pdev = pdev; | 
|  | qedf->dbg_ctx.pdev = pdev; | 
|  | qedf->dbg_ctx.host_no = lport->host->host_no; | 
|  | spin_lock_init(&qedf->hba_lock); | 
|  | INIT_LIST_HEAD(&qedf->fcports); | 
|  | qedf->curr_conn_id = QEDF_MAX_SESSIONS - 1; | 
|  | atomic_set(&qedf->num_offloads, 0); | 
|  | qedf->stop_io_on_error = false; | 
|  | pci_set_drvdata(pdev, qedf); | 
|  | init_completion(&qedf->fipvlan_compl); | 
|  | mutex_init(&qedf->stats_mutex); | 
|  | mutex_init(&qedf->flush_mutex); | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_INFO, | 
|  | "QLogic FastLinQ FCoE Module qedf %s, " | 
|  | "FW %d.%d.%d.%d\n", QEDF_VERSION, | 
|  | FW_MAJOR_VERSION, FW_MINOR_VERSION, FW_REVISION_VERSION, | 
|  | FW_ENGINEERING_VERSION); | 
|  | } else { | 
|  | /* Init pointers during recovery */ | 
|  | qedf = pci_get_drvdata(pdev); | 
|  | lport = qedf->lport; | 
|  | } | 
|  |  | 
|  | host = lport->host; | 
|  |  | 
|  | /* Allocate mempool for qedf_io_work structs */ | 
|  | qedf->io_mempool = mempool_create_slab_pool(QEDF_IO_WORK_MIN, | 
|  | qedf_io_work_cache); | 
|  | if (qedf->io_mempool == NULL) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "qedf->io_mempool is NULL.\n"); | 
|  | goto err1; | 
|  | } | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_INFO, "qedf->io_mempool=%p.\n", | 
|  | qedf->io_mempool); | 
|  |  | 
|  | sprintf(host_buf, "qedf_%u_link", | 
|  | qedf->lport->host->host_no); | 
|  | qedf->link_update_wq = create_workqueue(host_buf); | 
|  | INIT_DELAYED_WORK(&qedf->link_update, qedf_handle_link_update); | 
|  | INIT_DELAYED_WORK(&qedf->link_recovery, qedf_link_recovery); | 
|  | INIT_DELAYED_WORK(&qedf->grcdump_work, qedf_wq_grcdump); | 
|  | qedf->fipvlan_retries = qedf_fipvlan_retries; | 
|  | /* Set a default prio in case DCBX doesn't converge */ | 
|  | if (qedf_default_prio > -1) { | 
|  | /* | 
|  | * This is the case where we pass a modparam in so we want to | 
|  | * honor it even if dcbx doesn't converge. | 
|  | */ | 
|  | qedf->prio = qedf_default_prio; | 
|  | } else | 
|  | qedf->prio = QEDF_DEFAULT_PRIO; | 
|  |  | 
|  | /* | 
|  | * Common probe. Takes care of basic hardware init and pci_* | 
|  | * functions. | 
|  | */ | 
|  | memset(&qed_params, 0, sizeof(qed_params)); | 
|  | qed_params.protocol = QED_PROTOCOL_FCOE; | 
|  | qed_params.dp_module = qedf_dp_module; | 
|  | qed_params.dp_level = qedf_dp_level; | 
|  | qed_params.is_vf = is_vf; | 
|  | qedf->cdev = qed_ops->common->probe(pdev, &qed_params); | 
|  | if (!qedf->cdev) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "common probe failed.\n"); | 
|  | rc = -ENODEV; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | /* Learn information crucial for qedf to progress */ | 
|  | rc = qed_ops->fill_dev_info(qedf->cdev, &qedf->dev_info); | 
|  | if (rc) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Failed to dev info.\n"); | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, | 
|  | "dev_info: num_hwfns=%d affin_hwfn_idx=%d.\n", | 
|  | qedf->dev_info.common.num_hwfns, | 
|  | qed_ops->common->get_affin_hwfn_idx(qedf->cdev)); | 
|  |  | 
|  | /* queue allocation code should come here | 
|  | * order should be | 
|  | * 	slowpath_start | 
|  | * 	status block allocation | 
|  | *	interrupt registration (to get min number of queues) | 
|  | *	set_fcoe_pf_param | 
|  | *	qed_sp_fcoe_func_start | 
|  | */ | 
|  | rc = qedf_set_fcoe_pf_param(qedf); | 
|  | if (rc) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Cannot set fcoe pf param.\n"); | 
|  | goto err2; | 
|  | } | 
|  | qed_ops->common->update_pf_params(qedf->cdev, &qedf->pf_params); | 
|  |  | 
|  | /* Record BDQ producer doorbell addresses */ | 
|  | qedf->bdq_primary_prod = qedf->dev_info.primary_dbq_rq_addr; | 
|  | qedf->bdq_secondary_prod = qedf->dev_info.secondary_bdq_rq_addr; | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "BDQ primary_prod=%p secondary_prod=%p.\n", qedf->bdq_primary_prod, | 
|  | qedf->bdq_secondary_prod); | 
|  |  | 
|  | qed_ops->register_ops(qedf->cdev, &qedf_cb_ops, qedf); | 
|  |  | 
|  | rc = qedf_prepare_sb(qedf); | 
|  | if (rc) { | 
|  |  | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Cannot start slowpath.\n"); | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | /* Start the Slowpath-process */ | 
|  | slowpath_params.int_mode = QED_INT_MODE_MSIX; | 
|  | slowpath_params.drv_major = QEDF_DRIVER_MAJOR_VER; | 
|  | slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER; | 
|  | slowpath_params.drv_rev = QEDF_DRIVER_REV_VER; | 
|  | slowpath_params.drv_eng = QEDF_DRIVER_ENG_VER; | 
|  | strncpy(slowpath_params.name, "qedf", QED_DRV_VER_STR_SIZE); | 
|  | rc = qed_ops->common->slowpath_start(qedf->cdev, &slowpath_params); | 
|  | if (rc) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Cannot start slowpath.\n"); | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * update_pf_params needs to be called before and after slowpath | 
|  | * start | 
|  | */ | 
|  | qed_ops->common->update_pf_params(qedf->cdev, &qedf->pf_params); | 
|  |  | 
|  | /* Setup interrupts */ | 
|  | rc = qedf_setup_int(qedf); | 
|  | if (rc) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "Setup interrupts failed.\n"); | 
|  | goto err3; | 
|  | } | 
|  |  | 
|  | rc = qed_ops->start(qedf->cdev, &qedf->tasks); | 
|  | if (rc) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Cannot start FCoE function.\n"); | 
|  | goto err4; | 
|  | } | 
|  | task_start = qedf_get_task_mem(&qedf->tasks, 0); | 
|  | task_end = qedf_get_task_mem(&qedf->tasks, MAX_TID_BLOCKS_FCOE - 1); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "Task context start=%p, " | 
|  | "end=%p block_size=%u.\n", task_start, task_end, | 
|  | qedf->tasks.size); | 
|  |  | 
|  | /* | 
|  | * We need to write the number of BDs in the BDQ we've preallocated so | 
|  | * the f/w will do a prefetch and we'll get an unsolicited CQE when a | 
|  | * packet arrives. | 
|  | */ | 
|  | qedf->bdq_prod_idx = QEDF_BDQ_SIZE; | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Writing %d to primary and secondary BDQ doorbell registers.\n", | 
|  | qedf->bdq_prod_idx); | 
|  | writew(qedf->bdq_prod_idx, qedf->bdq_primary_prod); | 
|  | tmp = readw(qedf->bdq_primary_prod); | 
|  | writew(qedf->bdq_prod_idx, qedf->bdq_secondary_prod); | 
|  | tmp = readw(qedf->bdq_secondary_prod); | 
|  |  | 
|  | qed_ops->common->set_power_state(qedf->cdev, PCI_D0); | 
|  |  | 
|  | /* Now that the dev_info struct has been filled in set the MAC | 
|  | * address | 
|  | */ | 
|  | ether_addr_copy(qedf->mac, qedf->dev_info.common.hw_mac); | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, "MAC address is %pM.\n", | 
|  | qedf->mac); | 
|  |  | 
|  | /* | 
|  | * Set the WWNN and WWPN in the following way: | 
|  | * | 
|  | * If the info we get from qed is non-zero then use that to set the | 
|  | * WWPN and WWNN. Otherwise fall back to use fcoe_wwn_from_mac() based | 
|  | * on the MAC address. | 
|  | */ | 
|  | if (qedf->dev_info.wwnn != 0 && qedf->dev_info.wwpn != 0) { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Setting WWPN and WWNN from qed dev_info.\n"); | 
|  | qedf->wwnn = qedf->dev_info.wwnn; | 
|  | qedf->wwpn = qedf->dev_info.wwpn; | 
|  | } else { | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "Setting WWPN and WWNN using fcoe_wwn_from_mac().\n"); | 
|  | qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0); | 
|  | qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0); | 
|  | } | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC,  "WWNN=%016llx " | 
|  | "WWPN=%016llx.\n", qedf->wwnn, qedf->wwpn); | 
|  |  | 
|  | sprintf(host_buf, "host_%d", host->host_no); | 
|  | qed_ops->common->set_name(qedf->cdev, host_buf); | 
|  |  | 
|  | /* Allocate cmd mgr */ | 
|  | qedf->cmd_mgr = qedf_cmd_mgr_alloc(qedf); | 
|  | if (!qedf->cmd_mgr) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Failed to allocate cmd mgr.\n"); | 
|  | rc = -ENOMEM; | 
|  | goto err5; | 
|  | } | 
|  |  | 
|  | if (mode != QEDF_MODE_RECOVERY) { | 
|  | host->transportt = qedf_fc_transport_template; | 
|  | host->max_lun = qedf_max_lun; | 
|  | host->max_cmd_len = QEDF_MAX_CDB_LEN; | 
|  | host->can_queue = FCOE_PARAMS_NUM_TASKS; | 
|  | rc = scsi_add_host(host, &pdev->dev); | 
|  | if (rc) { | 
|  | QEDF_WARN(&qedf->dbg_ctx, | 
|  | "Error adding Scsi_Host rc=0x%x.\n", rc); | 
|  | goto err6; | 
|  | } | 
|  | } | 
|  |  | 
|  | memset(¶ms, 0, sizeof(params)); | 
|  | params.mtu = QEDF_LL2_BUF_SIZE; | 
|  | ether_addr_copy(params.ll2_mac_address, qedf->mac); | 
|  |  | 
|  | /* Start LL2 processing thread */ | 
|  | snprintf(host_buf, 20, "qedf_%d_ll2", host->host_no); | 
|  | qedf->ll2_recv_wq = | 
|  | create_workqueue(host_buf); | 
|  | if (!qedf->ll2_recv_wq) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Failed to LL2 workqueue.\n"); | 
|  | rc = -ENOMEM; | 
|  | goto err7; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | qedf_dbg_host_init(&(qedf->dbg_ctx), qedf_debugfs_ops, | 
|  | qedf_dbg_fops); | 
|  | #endif | 
|  |  | 
|  | /* Start LL2 */ | 
|  | qed_ops->ll2->register_cb_ops(qedf->cdev, &qedf_ll2_cb_ops, qedf); | 
|  | rc = qed_ops->ll2->start(qedf->cdev, ¶ms); | 
|  | if (rc) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Could not start Light L2.\n"); | 
|  | goto err7; | 
|  | } | 
|  | set_bit(QEDF_LL2_STARTED, &qedf->flags); | 
|  |  | 
|  | /* Set initial FIP/FCoE VLAN to NULL */ | 
|  | qedf->vlan_id = 0; | 
|  |  | 
|  | /* | 
|  | * No need to setup fcoe_ctlr or fc_lport objects during recovery since | 
|  | * they were not reaped during the unload process. | 
|  | */ | 
|  | if (mode != QEDF_MODE_RECOVERY) { | 
|  | /* Setup imbedded fcoe controller */ | 
|  | qedf_fcoe_ctlr_setup(qedf); | 
|  |  | 
|  | /* Setup lport */ | 
|  | rc = qedf_lport_setup(qedf); | 
|  | if (rc) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), | 
|  | "qedf_lport_setup failed.\n"); | 
|  | goto err7; | 
|  | } | 
|  | } | 
|  |  | 
|  | sprintf(host_buf, "qedf_%u_timer", qedf->lport->host->host_no); | 
|  | qedf->timer_work_queue = | 
|  | create_workqueue(host_buf); | 
|  | if (!qedf->timer_work_queue) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Failed to start timer " | 
|  | "workqueue.\n"); | 
|  | rc = -ENOMEM; | 
|  | goto err7; | 
|  | } | 
|  |  | 
|  | /* DPC workqueue is not reaped during recovery unload */ | 
|  | if (mode != QEDF_MODE_RECOVERY) { | 
|  | sprintf(host_buf, "qedf_%u_dpc", | 
|  | qedf->lport->host->host_no); | 
|  | qedf->dpc_wq = create_workqueue(host_buf); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * GRC dump and sysfs parameters are not reaped during the recovery | 
|  | * unload process. | 
|  | */ | 
|  | if (mode != QEDF_MODE_RECOVERY) { | 
|  | qedf->grcdump_size = | 
|  | qed_ops->common->dbg_all_data_size(qedf->cdev); | 
|  | if (qedf->grcdump_size) { | 
|  | rc = qedf_alloc_grc_dump_buf(&qedf->grcdump, | 
|  | qedf->grcdump_size); | 
|  | if (rc) { | 
|  | QEDF_ERR(&(qedf->dbg_ctx), | 
|  | "GRC Dump buffer alloc failed.\n"); | 
|  | qedf->grcdump = NULL; | 
|  | } | 
|  |  | 
|  | QEDF_INFO(&(qedf->dbg_ctx), QEDF_LOG_DISC, | 
|  | "grcdump: addr=%p, size=%u.\n", | 
|  | qedf->grcdump, qedf->grcdump_size); | 
|  | } | 
|  | qedf_create_sysfs_ctx_attr(qedf); | 
|  |  | 
|  | /* Initialize I/O tracing for this adapter */ | 
|  | spin_lock_init(&qedf->io_trace_lock); | 
|  | qedf->io_trace_idx = 0; | 
|  | } | 
|  |  | 
|  | init_completion(&qedf->flogi_compl); | 
|  |  | 
|  | status = qed_ops->common->update_drv_state(qedf->cdev, true); | 
|  | if (status) | 
|  | QEDF_ERR(&(qedf->dbg_ctx), | 
|  | "Failed to send drv state to MFW.\n"); | 
|  |  | 
|  | memset(&link_params, 0, sizeof(struct qed_link_params)); | 
|  | link_params.link_up = true; | 
|  | status = qed_ops->common->set_link(qedf->cdev, &link_params); | 
|  | if (status) | 
|  | QEDF_WARN(&(qedf->dbg_ctx), "set_link failed.\n"); | 
|  |  | 
|  | /* Start/restart discovery */ | 
|  | if (mode == QEDF_MODE_RECOVERY) | 
|  | fcoe_ctlr_link_up(&qedf->ctlr); | 
|  | else | 
|  | fc_fabric_login(lport); | 
|  |  | 
|  | /* All good */ | 
|  | return 0; | 
|  |  | 
|  | err7: | 
|  | if (qedf->ll2_recv_wq) | 
|  | destroy_workqueue(qedf->ll2_recv_wq); | 
|  | fc_remove_host(qedf->lport->host); | 
|  | scsi_remove_host(qedf->lport->host); | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | qedf_dbg_host_exit(&(qedf->dbg_ctx)); | 
|  | #endif | 
|  | err6: | 
|  | qedf_cmd_mgr_free(qedf->cmd_mgr); | 
|  | err5: | 
|  | qed_ops->stop(qedf->cdev); | 
|  | err4: | 
|  | qedf_free_fcoe_pf_param(qedf); | 
|  | qedf_sync_free_irqs(qedf); | 
|  | err3: | 
|  | qed_ops->common->slowpath_stop(qedf->cdev); | 
|  | err2: | 
|  | qed_ops->common->remove(qedf->cdev); | 
|  | err1: | 
|  | scsi_host_put(lport->host); | 
|  | err0: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int qedf_probe(struct pci_dev *pdev, const struct pci_device_id *id) | 
|  | { | 
|  | return __qedf_probe(pdev, QEDF_MODE_NORMAL); | 
|  | } | 
|  |  | 
|  | static void __qedf_remove(struct pci_dev *pdev, int mode) | 
|  | { | 
|  | struct qedf_ctx *qedf; | 
|  | int rc; | 
|  |  | 
|  | if (!pdev) { | 
|  | QEDF_ERR(NULL, "pdev is NULL.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | qedf = pci_get_drvdata(pdev); | 
|  |  | 
|  | /* | 
|  | * Prevent race where we're in board disable work and then try to | 
|  | * rmmod the module. | 
|  | */ | 
|  | if (test_bit(QEDF_UNLOADING, &qedf->flags)) { | 
|  | QEDF_ERR(&qedf->dbg_ctx, "Already removing PCI function.\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (mode != QEDF_MODE_RECOVERY) | 
|  | set_bit(QEDF_UNLOADING, &qedf->flags); | 
|  |  | 
|  | /* Logoff the fabric to upload all connections */ | 
|  | if (mode == QEDF_MODE_RECOVERY) | 
|  | fcoe_ctlr_link_down(&qedf->ctlr); | 
|  | else | 
|  | fc_fabric_logoff(qedf->lport); | 
|  |  | 
|  | if (qedf_wait_for_upload(qedf) == false) | 
|  | QEDF_ERR(&qedf->dbg_ctx, "Could not upload all sessions.\n"); | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | qedf_dbg_host_exit(&(qedf->dbg_ctx)); | 
|  | #endif | 
|  |  | 
|  | /* Stop any link update handling */ | 
|  | cancel_delayed_work_sync(&qedf->link_update); | 
|  | destroy_workqueue(qedf->link_update_wq); | 
|  | qedf->link_update_wq = NULL; | 
|  |  | 
|  | if (qedf->timer_work_queue) | 
|  | destroy_workqueue(qedf->timer_work_queue); | 
|  |  | 
|  | /* Stop Light L2 */ | 
|  | clear_bit(QEDF_LL2_STARTED, &qedf->flags); | 
|  | qed_ops->ll2->stop(qedf->cdev); | 
|  | if (qedf->ll2_recv_wq) | 
|  | destroy_workqueue(qedf->ll2_recv_wq); | 
|  |  | 
|  | /* Stop fastpath */ | 
|  | qedf_sync_free_irqs(qedf); | 
|  | qedf_destroy_sb(qedf); | 
|  |  | 
|  | /* | 
|  | * During recovery don't destroy OS constructs that represent the | 
|  | * physical port. | 
|  | */ | 
|  | if (mode != QEDF_MODE_RECOVERY) { | 
|  | qedf_free_grc_dump_buf(&qedf->grcdump); | 
|  | qedf_remove_sysfs_ctx_attr(qedf); | 
|  |  | 
|  | /* Remove all SCSI/libfc/libfcoe structures */ | 
|  | fcoe_ctlr_destroy(&qedf->ctlr); | 
|  | fc_lport_destroy(qedf->lport); | 
|  | fc_remove_host(qedf->lport->host); | 
|  | scsi_remove_host(qedf->lport->host); | 
|  | } | 
|  |  | 
|  | qedf_cmd_mgr_free(qedf->cmd_mgr); | 
|  |  | 
|  | if (mode != QEDF_MODE_RECOVERY) { | 
|  | fc_exch_mgr_free(qedf->lport); | 
|  | fc_lport_free_stats(qedf->lport); | 
|  |  | 
|  | /* Wait for all vports to be reaped */ | 
|  | qedf_wait_for_vport_destroy(qedf); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Now that all connections have been uploaded we can stop the | 
|  | * rest of the qed operations | 
|  | */ | 
|  | qed_ops->stop(qedf->cdev); | 
|  |  | 
|  | if (mode != QEDF_MODE_RECOVERY) { | 
|  | if (qedf->dpc_wq) { | 
|  | /* Stop general DPC handling */ | 
|  | destroy_workqueue(qedf->dpc_wq); | 
|  | qedf->dpc_wq = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Final shutdown for the board */ | 
|  | qedf_free_fcoe_pf_param(qedf); | 
|  | if (mode != QEDF_MODE_RECOVERY) { | 
|  | qed_ops->common->set_power_state(qedf->cdev, PCI_D0); | 
|  | pci_set_drvdata(pdev, NULL); | 
|  | } | 
|  |  | 
|  | rc = qed_ops->common->update_drv_state(qedf->cdev, false); | 
|  | if (rc) | 
|  | QEDF_ERR(&(qedf->dbg_ctx), | 
|  | "Failed to send drv state to MFW.\n"); | 
|  |  | 
|  | qed_ops->common->slowpath_stop(qedf->cdev); | 
|  | qed_ops->common->remove(qedf->cdev); | 
|  |  | 
|  | mempool_destroy(qedf->io_mempool); | 
|  |  | 
|  | /* Only reap the Scsi_host on a real removal */ | 
|  | if (mode != QEDF_MODE_RECOVERY) | 
|  | scsi_host_put(qedf->lport->host); | 
|  | } | 
|  |  | 
|  | static void qedf_remove(struct pci_dev *pdev) | 
|  | { | 
|  | /* Check to make sure this function wasn't already disabled */ | 
|  | if (!atomic_read(&pdev->enable_cnt)) | 
|  | return; | 
|  |  | 
|  | __qedf_remove(pdev, QEDF_MODE_NORMAL); | 
|  | } | 
|  |  | 
|  | void qedf_wq_grcdump(struct work_struct *work) | 
|  | { | 
|  | struct qedf_ctx *qedf = | 
|  | container_of(work, struct qedf_ctx, grcdump_work.work); | 
|  |  | 
|  | QEDF_ERR(&(qedf->dbg_ctx), "Collecting GRC dump.\n"); | 
|  | qedf_capture_grc_dump(qedf); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Protocol TLV handler | 
|  | */ | 
|  | void qedf_get_protocol_tlv_data(void *dev, void *data) | 
|  | { | 
|  | struct qedf_ctx *qedf = dev; | 
|  | struct qed_mfw_tlv_fcoe *fcoe = data; | 
|  | struct fc_lport *lport = qedf->lport; | 
|  | struct Scsi_Host *host = lport->host; | 
|  | struct fc_host_attrs *fc_host = shost_to_fc_host(host); | 
|  | struct fc_host_statistics *hst; | 
|  |  | 
|  | /* Force a refresh of the fc_host stats including offload stats */ | 
|  | hst = qedf_fc_get_host_stats(host); | 
|  |  | 
|  | fcoe->qos_pri_set = true; | 
|  | fcoe->qos_pri = 3; /* Hard coded to 3 in driver */ | 
|  |  | 
|  | fcoe->ra_tov_set = true; | 
|  | fcoe->ra_tov = lport->r_a_tov; | 
|  |  | 
|  | fcoe->ed_tov_set = true; | 
|  | fcoe->ed_tov = lport->e_d_tov; | 
|  |  | 
|  | fcoe->npiv_state_set = true; | 
|  | fcoe->npiv_state = 1; /* NPIV always enabled */ | 
|  |  | 
|  | fcoe->num_npiv_ids_set = true; | 
|  | fcoe->num_npiv_ids = fc_host->npiv_vports_inuse; | 
|  |  | 
|  | /* Certain attributes we only want to set if we've selected an FCF */ | 
|  | if (qedf->ctlr.sel_fcf) { | 
|  | fcoe->switch_name_set = true; | 
|  | u64_to_wwn(qedf->ctlr.sel_fcf->switch_name, fcoe->switch_name); | 
|  | } | 
|  |  | 
|  | fcoe->port_state_set = true; | 
|  | /* For qedf we're either link down or fabric attach */ | 
|  | if (lport->link_up) | 
|  | fcoe->port_state = QED_MFW_TLV_PORT_STATE_FABRIC; | 
|  | else | 
|  | fcoe->port_state = QED_MFW_TLV_PORT_STATE_OFFLINE; | 
|  |  | 
|  | fcoe->link_failures_set = true; | 
|  | fcoe->link_failures = (u16)hst->link_failure_count; | 
|  |  | 
|  | fcoe->fcoe_txq_depth_set = true; | 
|  | fcoe->fcoe_rxq_depth_set = true; | 
|  | fcoe->fcoe_rxq_depth = FCOE_PARAMS_NUM_TASKS; | 
|  | fcoe->fcoe_txq_depth = FCOE_PARAMS_NUM_TASKS; | 
|  |  | 
|  | fcoe->fcoe_rx_frames_set = true; | 
|  | fcoe->fcoe_rx_frames = hst->rx_frames; | 
|  |  | 
|  | fcoe->fcoe_tx_frames_set = true; | 
|  | fcoe->fcoe_tx_frames = hst->tx_frames; | 
|  |  | 
|  | fcoe->fcoe_rx_bytes_set = true; | 
|  | fcoe->fcoe_rx_bytes = hst->fcp_input_megabytes * 1000000; | 
|  |  | 
|  | fcoe->fcoe_tx_bytes_set = true; | 
|  | fcoe->fcoe_tx_bytes = hst->fcp_output_megabytes * 1000000; | 
|  |  | 
|  | fcoe->crc_count_set = true; | 
|  | fcoe->crc_count = hst->invalid_crc_count; | 
|  |  | 
|  | fcoe->tx_abts_set = true; | 
|  | fcoe->tx_abts = hst->fcp_packet_aborts; | 
|  |  | 
|  | fcoe->tx_lun_rst_set = true; | 
|  | fcoe->tx_lun_rst = qedf->lun_resets; | 
|  |  | 
|  | fcoe->abort_task_sets_set = true; | 
|  | fcoe->abort_task_sets = qedf->packet_aborts; | 
|  |  | 
|  | fcoe->scsi_busy_set = true; | 
|  | fcoe->scsi_busy = qedf->busy; | 
|  |  | 
|  | fcoe->scsi_tsk_full_set = true; | 
|  | fcoe->scsi_tsk_full = qedf->task_set_fulls; | 
|  | } | 
|  |  | 
|  | static void qedf_shutdown(struct pci_dev *pdev) | 
|  | { | 
|  | __qedf_remove(pdev, QEDF_MODE_NORMAL); | 
|  | } | 
|  |  | 
|  | /* Generic TLV data callback */ | 
|  | void qedf_get_generic_tlv_data(void *dev, struct qed_generic_tlvs *data) | 
|  | { | 
|  | struct qedf_ctx *qedf; | 
|  |  | 
|  | if (!dev) { | 
|  | QEDF_INFO(NULL, QEDF_LOG_EVT, | 
|  | "dev is NULL so ignoring get_generic_tlv_data request.\n"); | 
|  | return; | 
|  | } | 
|  | qedf = (struct qedf_ctx *)dev; | 
|  |  | 
|  | memset(data, 0, sizeof(struct qed_generic_tlvs)); | 
|  | ether_addr_copy(data->mac[0], qedf->mac); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Module Init/Remove | 
|  | */ | 
|  |  | 
|  | static int __init qedf_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* If debug=1 passed, set the default log mask */ | 
|  | if (qedf_debug == QEDF_LOG_DEFAULT) | 
|  | qedf_debug = QEDF_DEFAULT_LOG_MASK; | 
|  |  | 
|  | /* | 
|  | * Check that default prio for FIP/FCoE traffic is between 0..7 if a | 
|  | * value has been set | 
|  | */ | 
|  | if (qedf_default_prio > -1) | 
|  | if (qedf_default_prio > 7) { | 
|  | qedf_default_prio = QEDF_DEFAULT_PRIO; | 
|  | QEDF_ERR(NULL, "FCoE/FIP priority out of range, resetting to %d.\n", | 
|  | QEDF_DEFAULT_PRIO); | 
|  | } | 
|  |  | 
|  | /* Print driver banner */ | 
|  | QEDF_INFO(NULL, QEDF_LOG_INFO, "%s v%s.\n", QEDF_DESCR, | 
|  | QEDF_VERSION); | 
|  |  | 
|  | /* Create kmem_cache for qedf_io_work structs */ | 
|  | qedf_io_work_cache = kmem_cache_create("qedf_io_work_cache", | 
|  | sizeof(struct qedf_io_work), 0, SLAB_HWCACHE_ALIGN, NULL); | 
|  | if (qedf_io_work_cache == NULL) { | 
|  | QEDF_ERR(NULL, "qedf_io_work_cache is NULL.\n"); | 
|  | goto err1; | 
|  | } | 
|  | QEDF_INFO(NULL, QEDF_LOG_DISC, "qedf_io_work_cache=%p.\n", | 
|  | qedf_io_work_cache); | 
|  |  | 
|  | qed_ops = qed_get_fcoe_ops(); | 
|  | if (!qed_ops) { | 
|  | QEDF_ERR(NULL, "Failed to get qed fcoe operations\n"); | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | qedf_dbg_init("qedf"); | 
|  | #endif | 
|  |  | 
|  | qedf_fc_transport_template = | 
|  | fc_attach_transport(&qedf_fc_transport_fn); | 
|  | if (!qedf_fc_transport_template) { | 
|  | QEDF_ERR(NULL, "Could not register with FC transport\n"); | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | qedf_fc_vport_transport_template = | 
|  | fc_attach_transport(&qedf_fc_vport_transport_fn); | 
|  | if (!qedf_fc_vport_transport_template) { | 
|  | QEDF_ERR(NULL, "Could not register vport template with FC " | 
|  | "transport\n"); | 
|  | goto err3; | 
|  | } | 
|  |  | 
|  | qedf_io_wq = create_workqueue("qedf_io_wq"); | 
|  | if (!qedf_io_wq) { | 
|  | QEDF_ERR(NULL, "Could not create qedf_io_wq.\n"); | 
|  | goto err4; | 
|  | } | 
|  |  | 
|  | qedf_cb_ops.get_login_failures = qedf_get_login_failures; | 
|  |  | 
|  | ret = pci_register_driver(&qedf_pci_driver); | 
|  | if (ret) { | 
|  | QEDF_ERR(NULL, "Failed to register driver\n"); | 
|  | goto err5; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err5: | 
|  | destroy_workqueue(qedf_io_wq); | 
|  | err4: | 
|  | fc_release_transport(qedf_fc_vport_transport_template); | 
|  | err3: | 
|  | fc_release_transport(qedf_fc_transport_template); | 
|  | err2: | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | qedf_dbg_exit(); | 
|  | #endif | 
|  | qed_put_fcoe_ops(); | 
|  | err1: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static void __exit qedf_cleanup(void) | 
|  | { | 
|  | pci_unregister_driver(&qedf_pci_driver); | 
|  |  | 
|  | destroy_workqueue(qedf_io_wq); | 
|  |  | 
|  | fc_release_transport(qedf_fc_vport_transport_template); | 
|  | fc_release_transport(qedf_fc_transport_template); | 
|  | #ifdef CONFIG_DEBUG_FS | 
|  | qedf_dbg_exit(); | 
|  | #endif | 
|  | qed_put_fcoe_ops(); | 
|  |  | 
|  | kmem_cache_destroy(qedf_io_work_cache); | 
|  | } | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("QLogic FastLinQ 4xxxx FCoE Module"); | 
|  | MODULE_AUTHOR("QLogic Corporation"); | 
|  | MODULE_VERSION(QEDF_VERSION); | 
|  | module_init(qedf_init); | 
|  | module_exit(qedf_cleanup); |