| /* | 
 |  * drivers/char/watchdog/max63xx_wdt.c | 
 |  * | 
 |  * Driver for max63{69,70,71,72,73,74} watchdog timers | 
 |  * | 
 |  * Copyright (C) 2009 Marc Zyngier <maz@misterjones.org> | 
 |  * | 
 |  * This file is licensed under the terms of the GNU General Public | 
 |  * License version 2. This program is licensed "as is" without any | 
 |  * warranty of any kind, whether express or implied. | 
 |  * | 
 |  * This driver assumes the watchdog pins are memory mapped (as it is | 
 |  * the case for the Arcom Zeus). Should it be connected over GPIOs or | 
 |  * another interface, some abstraction will have to be introduced. | 
 |  */ | 
 |  | 
 | #include <linux/err.h> | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/mod_devicetable.h> | 
 | #include <linux/types.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/watchdog.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/io.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #define DEFAULT_HEARTBEAT 60 | 
 | #define MAX_HEARTBEAT     60 | 
 |  | 
 | static unsigned int heartbeat = DEFAULT_HEARTBEAT; | 
 | static bool nowayout  = WATCHDOG_NOWAYOUT; | 
 |  | 
 | /* | 
 |  * Memory mapping: a single byte, 3 first lower bits to select bit 3 | 
 |  * to ping the watchdog. | 
 |  */ | 
 | #define MAX6369_WDSET	(7 << 0) | 
 | #define MAX6369_WDI	(1 << 3) | 
 |  | 
 | #define MAX6369_WDSET_DISABLED	3 | 
 |  | 
 | static int nodelay; | 
 |  | 
 | struct max63xx_wdt { | 
 | 	struct watchdog_device wdd; | 
 | 	const struct max63xx_timeout *timeout; | 
 |  | 
 | 	/* memory mapping */ | 
 | 	void __iomem *base; | 
 | 	spinlock_t lock; | 
 |  | 
 | 	/* WDI and WSET bits write access routines */ | 
 | 	void (*ping)(struct max63xx_wdt *wdt); | 
 | 	void (*set)(struct max63xx_wdt *wdt, u8 set); | 
 | }; | 
 |  | 
 | /* | 
 |  * The timeout values used are actually the absolute minimum the chip | 
 |  * offers. Typical values on my board are slightly over twice as long | 
 |  * (10s setting ends up with a 25s timeout), and can be up to 3 times | 
 |  * the nominal setting (according to the datasheet). So please take | 
 |  * these values with a grain of salt. Same goes for the initial delay | 
 |  * "feature". Only max6373/74 have a few settings without this initial | 
 |  * delay (selected with the "nodelay" parameter). | 
 |  * | 
 |  * I also decided to remove from the tables any timeout smaller than a | 
 |  * second, as it looked completly overkill... | 
 |  */ | 
 |  | 
 | /* Timeouts in second */ | 
 | struct max63xx_timeout { | 
 | 	const u8 wdset; | 
 | 	const u8 tdelay; | 
 | 	const u8 twd; | 
 | }; | 
 |  | 
 | static const struct max63xx_timeout max6369_table[] = { | 
 | 	{ 5,  1,  1 }, | 
 | 	{ 6, 10, 10 }, | 
 | 	{ 7, 60, 60 }, | 
 | 	{ }, | 
 | }; | 
 |  | 
 | static const struct max63xx_timeout max6371_table[] = { | 
 | 	{ 6, 60,  3 }, | 
 | 	{ 7, 60, 60 }, | 
 | 	{ }, | 
 | }; | 
 |  | 
 | static const struct max63xx_timeout max6373_table[] = { | 
 | 	{ 2, 60,  1 }, | 
 | 	{ 5,  0,  1 }, | 
 | 	{ 1,  3,  3 }, | 
 | 	{ 7, 60, 10 }, | 
 | 	{ 6,  0, 10 }, | 
 | 	{ }, | 
 | }; | 
 |  | 
 | static struct max63xx_timeout * | 
 | max63xx_select_timeout(struct max63xx_timeout *table, int value) | 
 | { | 
 | 	while (table->twd) { | 
 | 		if (value <= table->twd) { | 
 | 			if (nodelay && table->tdelay == 0) | 
 | 				return table; | 
 |  | 
 | 			if (!nodelay) | 
 | 				return table; | 
 | 		} | 
 |  | 
 | 		table++; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static int max63xx_wdt_ping(struct watchdog_device *wdd) | 
 | { | 
 | 	struct max63xx_wdt *wdt = watchdog_get_drvdata(wdd); | 
 |  | 
 | 	wdt->ping(wdt); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int max63xx_wdt_start(struct watchdog_device *wdd) | 
 | { | 
 | 	struct max63xx_wdt *wdt = watchdog_get_drvdata(wdd); | 
 |  | 
 | 	wdt->set(wdt, wdt->timeout->wdset); | 
 |  | 
 | 	/* check for a edge triggered startup */ | 
 | 	if (wdt->timeout->tdelay == 0) | 
 | 		wdt->ping(wdt); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int max63xx_wdt_stop(struct watchdog_device *wdd) | 
 | { | 
 | 	struct max63xx_wdt *wdt = watchdog_get_drvdata(wdd); | 
 |  | 
 | 	wdt->set(wdt, MAX6369_WDSET_DISABLED); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct watchdog_ops max63xx_wdt_ops = { | 
 | 	.owner = THIS_MODULE, | 
 | 	.start = max63xx_wdt_start, | 
 | 	.stop = max63xx_wdt_stop, | 
 | 	.ping = max63xx_wdt_ping, | 
 | }; | 
 |  | 
 | static const struct watchdog_info max63xx_wdt_info = { | 
 | 	.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, | 
 | 	.identity = "max63xx Watchdog", | 
 | }; | 
 |  | 
 | static void max63xx_mmap_ping(struct max63xx_wdt *wdt) | 
 | { | 
 | 	u8 val; | 
 |  | 
 | 	spin_lock(&wdt->lock); | 
 |  | 
 | 	val = __raw_readb(wdt->base); | 
 |  | 
 | 	__raw_writeb(val | MAX6369_WDI, wdt->base); | 
 | 	__raw_writeb(val & ~MAX6369_WDI, wdt->base); | 
 |  | 
 | 	spin_unlock(&wdt->lock); | 
 | } | 
 |  | 
 | static void max63xx_mmap_set(struct max63xx_wdt *wdt, u8 set) | 
 | { | 
 | 	u8 val; | 
 |  | 
 | 	spin_lock(&wdt->lock); | 
 |  | 
 | 	val = __raw_readb(wdt->base); | 
 | 	val &= ~MAX6369_WDSET; | 
 | 	val |= set & MAX6369_WDSET; | 
 | 	__raw_writeb(val, wdt->base); | 
 |  | 
 | 	spin_unlock(&wdt->lock); | 
 | } | 
 |  | 
 | static int max63xx_mmap_init(struct platform_device *p, struct max63xx_wdt *wdt) | 
 | { | 
 | 	wdt->base = devm_platform_ioremap_resource(p, 0); | 
 | 	if (IS_ERR(wdt->base)) | 
 | 		return PTR_ERR(wdt->base); | 
 |  | 
 | 	spin_lock_init(&wdt->lock); | 
 |  | 
 | 	wdt->ping = max63xx_mmap_ping; | 
 | 	wdt->set = max63xx_mmap_set; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int max63xx_wdt_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct max63xx_wdt *wdt; | 
 | 	struct max63xx_timeout *table; | 
 | 	int err; | 
 |  | 
 | 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); | 
 | 	if (!wdt) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	table = (struct max63xx_timeout *)pdev->id_entry->driver_data; | 
 |  | 
 | 	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT) | 
 | 		heartbeat = DEFAULT_HEARTBEAT; | 
 |  | 
 | 	wdt->timeout = max63xx_select_timeout(table, heartbeat); | 
 | 	if (!wdt->timeout) { | 
 | 		dev_err(dev, "unable to satisfy %ds heartbeat request\n", | 
 | 			heartbeat); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	err = max63xx_mmap_init(pdev, wdt); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	platform_set_drvdata(pdev, &wdt->wdd); | 
 | 	watchdog_set_drvdata(&wdt->wdd, wdt); | 
 |  | 
 | 	wdt->wdd.parent = dev; | 
 | 	wdt->wdd.timeout = wdt->timeout->twd; | 
 | 	wdt->wdd.info = &max63xx_wdt_info; | 
 | 	wdt->wdd.ops = &max63xx_wdt_ops; | 
 |  | 
 | 	watchdog_set_nowayout(&wdt->wdd, nowayout); | 
 |  | 
 | 	err = devm_watchdog_register_device(dev, &wdt->wdd); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	dev_info(dev, "using %ds heartbeat with %ds initial delay\n", | 
 | 		 wdt->timeout->twd, wdt->timeout->tdelay); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct platform_device_id max63xx_id_table[] = { | 
 | 	{ "max6369_wdt", (kernel_ulong_t)max6369_table, }, | 
 | 	{ "max6370_wdt", (kernel_ulong_t)max6369_table, }, | 
 | 	{ "max6371_wdt", (kernel_ulong_t)max6371_table, }, | 
 | 	{ "max6372_wdt", (kernel_ulong_t)max6371_table, }, | 
 | 	{ "max6373_wdt", (kernel_ulong_t)max6373_table, }, | 
 | 	{ "max6374_wdt", (kernel_ulong_t)max6373_table, }, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(platform, max63xx_id_table); | 
 |  | 
 | static struct platform_driver max63xx_wdt_driver = { | 
 | 	.probe		= max63xx_wdt_probe, | 
 | 	.id_table	= max63xx_id_table, | 
 | 	.driver		= { | 
 | 		.name	= "max63xx_wdt", | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(max63xx_wdt_driver); | 
 |  | 
 | MODULE_AUTHOR("Marc Zyngier <maz@misterjones.org>"); | 
 | MODULE_DESCRIPTION("max63xx Watchdog Driver"); | 
 |  | 
 | module_param(heartbeat, int, 0); | 
 | MODULE_PARM_DESC(heartbeat, | 
 | 		 "Watchdog heartbeat period in seconds from 1 to " | 
 | 		 __MODULE_STRING(MAX_HEARTBEAT) ", default " | 
 | 		 __MODULE_STRING(DEFAULT_HEARTBEAT)); | 
 |  | 
 | module_param(nowayout, bool, 0); | 
 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" | 
 | 		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | 
 |  | 
 | module_param(nodelay, int, 0); | 
 | MODULE_PARM_DESC(nodelay, | 
 | 		 "Force selection of a timeout setting without initial delay " | 
 | 		 "(max6373/74 only, default=0)"); | 
 |  | 
 | MODULE_LICENSE("GPL v2"); |