| // SPDX-License-Identifier: GPL-2.0+ | 
 | /* | 
 |  * Watchdog driver for DA9063 PMICs. | 
 |  * | 
 |  * Copyright(c) 2012 Dialog Semiconductor Ltd. | 
 |  * | 
 |  * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com> | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/watchdog.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/mfd/da9063/registers.h> | 
 | #include <linux/mfd/da9063/core.h> | 
 | #include <linux/regmap.h> | 
 |  | 
 | /* | 
 |  * Watchdog selector to timeout in seconds. | 
 |  *   0: WDT disabled; | 
 |  *   others: timeout = 2048 ms * 2^(TWDSCALE-1). | 
 |  */ | 
 | static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 }; | 
 | #define DA9063_TWDSCALE_DISABLE		0 | 
 | #define DA9063_TWDSCALE_MIN		1 | 
 | #define DA9063_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1) | 
 | #define DA9063_WDT_MIN_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MIN] | 
 | #define DA9063_WDT_MAX_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MAX] | 
 | #define DA9063_WDG_TIMEOUT		wdt_timeout[3] | 
 | #define DA9063_RESET_PROTECTION_MS	256 | 
 |  | 
 | static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs) | 
 | { | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) { | 
 | 		if (wdt_timeout[i] >= secs) | 
 | 			return i; | 
 | 	} | 
 |  | 
 | 	return DA9063_TWDSCALE_MAX; | 
 | } | 
 |  | 
 | /* | 
 |  * Return 0 if watchdog is disabled, else non zero. | 
 |  */ | 
 | static unsigned int da9063_wdt_is_running(struct da9063 *da9063) | 
 | { | 
 | 	unsigned int val; | 
 |  | 
 | 	regmap_read(da9063->regmap, DA9063_REG_CONTROL_D, &val); | 
 |  | 
 | 	return val & DA9063_TWDSCALE_MASK; | 
 | } | 
 |  | 
 | static int da9063_wdt_disable_timer(struct da9063 *da9063) | 
 | { | 
 | 	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D, | 
 | 				  DA9063_TWDSCALE_MASK, | 
 | 				  DA9063_TWDSCALE_DISABLE); | 
 | } | 
 |  | 
 | static int | 
 | da9063_wdt_update_timeout(struct da9063 *da9063, unsigned int timeout) | 
 | { | 
 | 	unsigned int regval; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * The watchdog triggers a reboot if a timeout value is already | 
 | 	 * programmed because the timeout value combines two functions | 
 | 	 * in one: indicating the counter limit and starting the watchdog. | 
 | 	 * The watchdog must be disabled to be able to change the timeout | 
 | 	 * value if the watchdog is already running. Then we can set the | 
 | 	 * new timeout value which enables the watchdog again. | 
 | 	 */ | 
 | 	ret = da9063_wdt_disable_timer(da9063); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	usleep_range(150, 300); | 
 | 	regval = da9063_wdt_timeout_to_sel(timeout); | 
 |  | 
 | 	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D, | 
 | 				  DA9063_TWDSCALE_MASK, regval); | 
 | } | 
 |  | 
 | static int da9063_wdt_start(struct watchdog_device *wdd) | 
 | { | 
 | 	struct da9063 *da9063 = watchdog_get_drvdata(wdd); | 
 | 	int ret; | 
 |  | 
 | 	ret = da9063_wdt_update_timeout(da9063, wdd->timeout); | 
 | 	if (ret) | 
 | 		dev_err(da9063->dev, "Watchdog failed to start (err = %d)\n", | 
 | 			ret); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int da9063_wdt_stop(struct watchdog_device *wdd) | 
 | { | 
 | 	struct da9063 *da9063 = watchdog_get_drvdata(wdd); | 
 | 	int ret; | 
 |  | 
 | 	ret = da9063_wdt_disable_timer(da9063); | 
 | 	if (ret) | 
 | 		dev_alert(da9063->dev, "Watchdog failed to stop (err = %d)\n", | 
 | 			  ret); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int da9063_wdt_ping(struct watchdog_device *wdd) | 
 | { | 
 | 	struct da9063 *da9063 = watchdog_get_drvdata(wdd); | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, | 
 | 			   DA9063_WATCHDOG); | 
 | 	if (ret) | 
 | 		dev_alert(da9063->dev, "Failed to ping the watchdog (err = %d)\n", | 
 | 			  ret); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int da9063_wdt_set_timeout(struct watchdog_device *wdd, | 
 | 				  unsigned int timeout) | 
 | { | 
 | 	struct da9063 *da9063 = watchdog_get_drvdata(wdd); | 
 | 	int ret = 0; | 
 |  | 
 | 	/* | 
 | 	 * There are two cases when a set_timeout() will be called: | 
 | 	 * 1. The watchdog is off and someone wants to set the timeout for the | 
 | 	 *    further use. | 
 | 	 * 2. The watchdog is already running and a new timeout value should be | 
 | 	 *    set. | 
 | 	 * | 
 | 	 * The watchdog can't store a timeout value not equal zero without | 
 | 	 * enabling the watchdog, so the timeout must be buffered by the driver. | 
 | 	 */ | 
 | 	if (watchdog_active(wdd)) | 
 | 		ret = da9063_wdt_update_timeout(da9063, timeout); | 
 |  | 
 | 	if (ret) | 
 | 		dev_err(da9063->dev, "Failed to set watchdog timeout (err = %d)\n", | 
 | 			ret); | 
 | 	else | 
 | 		wdd->timeout = wdt_timeout[da9063_wdt_timeout_to_sel(timeout)]; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int da9063_wdt_restart(struct watchdog_device *wdd, unsigned long action, | 
 | 			      void *data) | 
 | { | 
 | 	struct da9063 *da9063 = watchdog_get_drvdata(wdd); | 
 | 	int ret; | 
 |  | 
 | 	ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, | 
 | 			   DA9063_SHUTDOWN); | 
 | 	if (ret) | 
 | 		dev_alert(da9063->dev, "Failed to shutdown (err = %d)\n", | 
 | 			  ret); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct watchdog_info da9063_watchdog_info = { | 
 | 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, | 
 | 	.identity = "DA9063 Watchdog", | 
 | }; | 
 |  | 
 | static const struct watchdog_ops da9063_watchdog_ops = { | 
 | 	.owner = THIS_MODULE, | 
 | 	.start = da9063_wdt_start, | 
 | 	.stop = da9063_wdt_stop, | 
 | 	.ping = da9063_wdt_ping, | 
 | 	.set_timeout = da9063_wdt_set_timeout, | 
 | 	.restart = da9063_wdt_restart, | 
 | }; | 
 |  | 
 | static int da9063_wdt_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct da9063 *da9063; | 
 | 	struct watchdog_device *wdd; | 
 |  | 
 | 	if (!dev->parent) | 
 | 		return -EINVAL; | 
 |  | 
 | 	da9063 = dev_get_drvdata(dev->parent); | 
 | 	if (!da9063) | 
 | 		return -EINVAL; | 
 |  | 
 | 	wdd = devm_kzalloc(dev, sizeof(*wdd), GFP_KERNEL); | 
 | 	if (!wdd) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	wdd->info = &da9063_watchdog_info; | 
 | 	wdd->ops = &da9063_watchdog_ops; | 
 | 	wdd->min_timeout = DA9063_WDT_MIN_TIMEOUT; | 
 | 	wdd->max_timeout = DA9063_WDT_MAX_TIMEOUT; | 
 | 	wdd->min_hw_heartbeat_ms = DA9063_RESET_PROTECTION_MS; | 
 | 	wdd->parent = dev; | 
 | 	wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS; | 
 |  | 
 | 	watchdog_set_restart_priority(wdd, 128); | 
 | 	watchdog_set_drvdata(wdd, da9063); | 
 |  | 
 | 	/* Set default timeout, maybe override it with DT value, scale it */ | 
 | 	wdd->timeout = DA9063_WDG_TIMEOUT; | 
 | 	watchdog_init_timeout(wdd, 0, dev); | 
 | 	da9063_wdt_set_timeout(wdd, wdd->timeout); | 
 |  | 
 | 	/* Change the timeout to the default value if the watchdog is running */ | 
 | 	if (da9063_wdt_is_running(da9063)) { | 
 | 		da9063_wdt_update_timeout(da9063, wdd->timeout); | 
 | 		set_bit(WDOG_HW_RUNNING, &wdd->status); | 
 | 	} | 
 |  | 
 | 	return devm_watchdog_register_device(dev, wdd); | 
 | } | 
 |  | 
 | static struct platform_driver da9063_wdt_driver = { | 
 | 	.probe = da9063_wdt_probe, | 
 | 	.driver = { | 
 | 		.name = DA9063_DRVNAME_WATCHDOG, | 
 | 	}, | 
 | }; | 
 | module_platform_driver(da9063_wdt_driver); | 
 |  | 
 | MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>"); | 
 | MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG); |