| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2016 PHYTEC Messtechnik GmbH |
| * Author: Christian Hemp <c.hemp@phytec.de> |
| */ |
| |
| / { |
| model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite"; |
| compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul"; |
| |
| aliases { |
| rtc0 = &i2c_rtc; |
| rtc1 = &snvs_rtc; |
| }; |
| |
| reg_sound_1v8: regulator-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "i2s-audio-1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| status = "disabled"; |
| }; |
| |
| reg_sound_3v3: regulator-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "i2s-audio-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| status = "disabled"; |
| }; |
| |
| reg_can1_en: regulator-can1 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&princtrl_flexcan1_en>; |
| regulator-name = "Can"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| status = "disabled"; |
| }; |
| |
| reg_adc1_vref_3v3: regulator-vref-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| sound: sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,bitclock-master = <&dailink_master>; |
| simple-audio-card,frame-master = <&dailink_master>; |
| simple-audio-card,widgets = |
| "Line", "Line In", |
| "Line", "Line Out", |
| "Speaker", "Speaker"; |
| simple-audio-card,routing = |
| "Line Out", "LLOUT", |
| "Line Out", "RLOUT", |
| "Speaker", "SPOP", |
| "Speaker", "SPOM", |
| "LINE1L", "Line In", |
| "LINE1R", "Line In"; |
| status = "disabled"; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&sai2>; |
| }; |
| |
| dailink_master: simple-audio-card,codec { |
| sound-dai = <&tlv320>; |
| clocks = <&clks IMX6UL_CLK_SAI2>; |
| }; |
| }; |
| |
| }; |
| |
| &adc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_adc1>; |
| vref-supply = <®_adc1_vref_3v3>; |
| /* |
| * driver can not separate a specific channel so we request 4 channels |
| * here - we need only the fourth channel |
| */ |
| num-channels = <4>; |
| status = "disabled"; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_can1_en>; |
| status = "disabled"; |
| }; |
| |
| &clks { |
| assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; |
| assigned-clock-rates = <786432000>; |
| }; |
| |
| &ecspi3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi3>; |
| cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; |
| status = "disabled"; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| phy-mode = "rmii"; |
| phy-handle = <ðphy2>; |
| status = "disabled"; |
| }; |
| |
| &i2c1 { |
| tlv320: codec@18 { |
| compatible = "ti,tlv320aic3007"; |
| #sound-dai-cells = <0>; |
| reg = <0x18>; |
| AVDD-supply = <®_sound_3v3>; |
| IOVDD-supply = <®_sound_3v3>; |
| DRVDD-supply = <®_sound_3v3>; |
| DVDD-supply = <®_sound_1v8>; |
| status = "disabled"; |
| }; |
| |
| stmpe: touchscreen@44 { |
| compatible = "st,stmpe811"; |
| reg = <0x44>; |
| interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-parent = <&gpio5>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_stmpe>; |
| status = "disabled"; |
| |
| touchscreen { |
| compatible = "st,stmpe-ts"; |
| st,sample-time = <4>; |
| st,mod-12b = <1>; |
| st,ref-sel = <0>; |
| st,adc-freq = <1>; |
| st,ave-ctrl = <1>; |
| st,touch-det-delay = <2>; |
| st,settling = <2>; |
| st,fraction-z = <7>; |
| st,i-drive = <1>; |
| touchscreen-inverted-x = <1>; |
| touchscreen-inverted-y = <1>; |
| }; |
| }; |
| |
| i2c_rtc: rtc@68 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rtc_int>; |
| compatible = "microcrystal,rv4162"; |
| reg = <0x68>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <1 IRQ_TYPE_LEVEL_LOW>; |
| status = "disabled"; |
| }; |
| }; |
| |
| &mdio { |
| ethphy2: ethernet-phy@2 { |
| reg = <2>; |
| micrel,led-mode = <1>; |
| clocks = <&clks IMX6UL_CLK_ENET2_REF>; |
| clock-names = "rmii-ref"; |
| status = "disabled"; |
| }; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "disabled"; |
| }; |
| |
| &sai2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai2>; |
| assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, |
| <&clks IMX6UL_CLK_SAI2>; |
| assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; |
| assigned-clock-rates = <0>, <19200000>; |
| fsl,sai-mclk-direction-output; |
| status = "disabled"; |
| }; |
| |
| &uart5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5>; |
| uart-has-rtscts; |
| status = "disabled"; |
| }; |
| |
| &usbotg1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb_otg1_id>; |
| dr_mode = "otg"; |
| status = "disabled"; |
| }; |
| |
| &usbotg2 { |
| dr_mode = "host"; |
| disable-over-current; |
| status = "disabled"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; |
| no-1-8-v; |
| keep-power-in-suspend; |
| wakeup-source; |
| status = "disabled"; |
| }; |
| |
| &iomuxc { |
| pinctrl_adc1: adc1grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 |
| >; |
| }; |
| |
| pinctrl_ecspi3: ecspi3grp { |
| fsl,pins = < |
| MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 |
| MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 |
| MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 |
| MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010 |
| MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010 |
| MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010 |
| MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010 |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1 { |
| fsl,pins = < |
| MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0 |
| MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0 |
| >; |
| }; |
| |
| princtrl_flexcan1_en: flexcan1engrp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059 |
| >; |
| }; |
| |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0 |
| >; |
| }; |
| |
| pinctrl_rtc_int: rtcintgrp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059 |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 |
| MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 |
| MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 |
| MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 |
| MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 |
| >; |
| }; |
| |
| pinctrl_stmpe: stmpegrp { |
| fsl,pins = < |
| MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059 |
| >; |
| }; |
| |
| pinctrl_uart5: uart5grp { |
| fsl,pins = < |
| MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 |
| MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 |
| MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 |
| MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_usb_otg1_id: usbotg1idgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 |
| MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1grp100mhz { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1grp200mhz { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 |
| >; |
| }; |
| }; |
