|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * phy-uniphier-usb2.c - PHY driver for UniPhier USB2 controller | 
|  | * Copyright 2015-2018 Socionext Inc. | 
|  | * Author: | 
|  | *      Kunihiko Hayashi <hayashi.kunihiko@socionext.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/mfd/syscon.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/phy/phy.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  |  | 
|  | #define SG_USBPHY1CTRL		0x500 | 
|  | #define SG_USBPHY1CTRL2		0x504 | 
|  | #define SG_USBPHY2CTRL		0x508 | 
|  | #define SG_USBPHY2CTRL2		0x50c	/* LD11 */ | 
|  | #define SG_USBPHY12PLL		0x50c	/* Pro4 */ | 
|  | #define SG_USBPHY3CTRL		0x510 | 
|  | #define SG_USBPHY3CTRL2		0x514 | 
|  | #define SG_USBPHY4CTRL		0x518	/* Pro4 */ | 
|  | #define SG_USBPHY4CTRL2		0x51c	/* Pro4 */ | 
|  | #define SG_USBPHY34PLL		0x51c	/* Pro4 */ | 
|  |  | 
|  | struct uniphier_u2phy_param { | 
|  | u32 offset; | 
|  | u32 value; | 
|  | }; | 
|  |  | 
|  | struct uniphier_u2phy_soc_data { | 
|  | struct uniphier_u2phy_param config0; | 
|  | struct uniphier_u2phy_param config1; | 
|  | }; | 
|  |  | 
|  | struct uniphier_u2phy_priv { | 
|  | struct regmap *regmap; | 
|  | struct phy *phy; | 
|  | struct regulator *vbus; | 
|  | const struct uniphier_u2phy_soc_data *data; | 
|  | struct uniphier_u2phy_priv *next; | 
|  | }; | 
|  |  | 
|  | static int uniphier_u2phy_power_on(struct phy *phy) | 
|  | { | 
|  | struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy); | 
|  | int ret = 0; | 
|  |  | 
|  | if (priv->vbus) | 
|  | ret = regulator_enable(priv->vbus); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int uniphier_u2phy_power_off(struct phy *phy) | 
|  | { | 
|  | struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy); | 
|  |  | 
|  | if (priv->vbus) | 
|  | regulator_disable(priv->vbus); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int uniphier_u2phy_init(struct phy *phy) | 
|  | { | 
|  | struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy); | 
|  |  | 
|  | if (!priv->data) | 
|  | return 0; | 
|  |  | 
|  | regmap_write(priv->regmap, priv->data->config0.offset, | 
|  | priv->data->config0.value); | 
|  | regmap_write(priv->regmap, priv->data->config1.offset, | 
|  | priv->data->config1.value); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct phy *uniphier_u2phy_xlate(struct device *dev, | 
|  | struct of_phandle_args *args) | 
|  | { | 
|  | struct uniphier_u2phy_priv *priv = dev_get_drvdata(dev); | 
|  |  | 
|  | while (priv && args->np != priv->phy->dev.of_node) | 
|  | priv = priv->next; | 
|  |  | 
|  | if (!priv) { | 
|  | dev_err(dev, "Failed to find appropriate phy\n"); | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | return priv->phy; | 
|  | } | 
|  |  | 
|  | static const struct phy_ops uniphier_u2phy_ops = { | 
|  | .init      = uniphier_u2phy_init, | 
|  | .power_on  = uniphier_u2phy_power_on, | 
|  | .power_off = uniphier_u2phy_power_off, | 
|  | .owner = THIS_MODULE, | 
|  | }; | 
|  |  | 
|  | static int uniphier_u2phy_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct device_node *parent, *child; | 
|  | struct uniphier_u2phy_priv *priv = NULL, *next = NULL; | 
|  | struct phy_provider *phy_provider; | 
|  | struct regmap *regmap; | 
|  | const struct uniphier_u2phy_soc_data *data; | 
|  | int ret, data_idx, ndatas; | 
|  |  | 
|  | data = of_device_get_match_data(dev); | 
|  | if (WARN_ON(!data)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* get number of data */ | 
|  | for (ndatas = 0; data[ndatas].config0.offset; ndatas++) | 
|  | ; | 
|  |  | 
|  | parent = of_get_parent(dev->of_node); | 
|  | regmap = syscon_node_to_regmap(parent); | 
|  | of_node_put(parent); | 
|  | if (IS_ERR(regmap)) { | 
|  | dev_err(dev, "Failed to get regmap\n"); | 
|  | return PTR_ERR(regmap); | 
|  | } | 
|  |  | 
|  | for_each_child_of_node(dev->of_node, child) { | 
|  | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) { | 
|  | ret = -ENOMEM; | 
|  | goto out_put_child; | 
|  | } | 
|  | priv->regmap = regmap; | 
|  |  | 
|  | priv->vbus = devm_regulator_get_optional(dev, "vbus"); | 
|  | if (IS_ERR(priv->vbus)) { | 
|  | if (PTR_ERR(priv->vbus) == -EPROBE_DEFER) { | 
|  | ret = PTR_ERR(priv->vbus); | 
|  | goto out_put_child; | 
|  | } | 
|  | priv->vbus = NULL; | 
|  | } | 
|  |  | 
|  | priv->phy = devm_phy_create(dev, child, &uniphier_u2phy_ops); | 
|  | if (IS_ERR(priv->phy)) { | 
|  | dev_err(dev, "Failed to create phy\n"); | 
|  | ret = PTR_ERR(priv->phy); | 
|  | goto out_put_child; | 
|  | } | 
|  |  | 
|  | ret = of_property_read_u32(child, "reg", &data_idx); | 
|  | if (ret) { | 
|  | dev_err(dev, "Failed to get reg property\n"); | 
|  | goto out_put_child; | 
|  | } | 
|  |  | 
|  | if (data_idx < ndatas) | 
|  | priv->data = &data[data_idx]; | 
|  | else | 
|  | dev_warn(dev, "No phy configuration: %s\n", | 
|  | child->full_name); | 
|  |  | 
|  | phy_set_drvdata(priv->phy, priv); | 
|  | priv->next = next; | 
|  | next = priv; | 
|  | } | 
|  |  | 
|  | dev_set_drvdata(dev, priv); | 
|  | phy_provider = devm_of_phy_provider_register(dev, | 
|  | uniphier_u2phy_xlate); | 
|  | return PTR_ERR_OR_ZERO(phy_provider); | 
|  |  | 
|  | out_put_child: | 
|  | of_node_put(child); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct uniphier_u2phy_soc_data uniphier_pro4_data[] = { | 
|  | { | 
|  | .config0 = { SG_USBPHY1CTRL, 0x05142400 }, | 
|  | .config1 = { SG_USBPHY12PLL, 0x00010010 }, | 
|  | }, | 
|  | { | 
|  | .config0 = { SG_USBPHY2CTRL, 0x05142400 }, | 
|  | .config1 = { SG_USBPHY12PLL, 0x00010010 }, | 
|  | }, | 
|  | { | 
|  | .config0 = { SG_USBPHY3CTRL, 0x05142400 }, | 
|  | .config1 = { SG_USBPHY34PLL, 0x00010010 }, | 
|  | }, | 
|  | { | 
|  | .config0 = { SG_USBPHY4CTRL, 0x05142400 }, | 
|  | .config1 = { SG_USBPHY34PLL, 0x00010010 }, | 
|  | }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  |  | 
|  | static const struct uniphier_u2phy_soc_data uniphier_ld11_data[] = { | 
|  | { | 
|  | .config0 = { SG_USBPHY1CTRL,  0x82280000 }, | 
|  | .config1 = { SG_USBPHY1CTRL2, 0x00000106 }, | 
|  | }, | 
|  | { | 
|  | .config0 = { SG_USBPHY2CTRL,  0x82280000 }, | 
|  | .config1 = { SG_USBPHY2CTRL2, 0x00000106 }, | 
|  | }, | 
|  | { | 
|  | .config0 = { SG_USBPHY3CTRL,  0x82280000 }, | 
|  | .config1 = { SG_USBPHY3CTRL2, 0x00000106 }, | 
|  | }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id uniphier_u2phy_match[] = { | 
|  | { | 
|  | .compatible = "socionext,uniphier-pro4-usb2-phy", | 
|  | .data = &uniphier_pro4_data, | 
|  | }, | 
|  | { | 
|  | .compatible = "socionext,uniphier-ld11-usb2-phy", | 
|  | .data = &uniphier_ld11_data, | 
|  | }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, uniphier_u2phy_match); | 
|  |  | 
|  | static struct platform_driver uniphier_u2phy_driver = { | 
|  | .probe = uniphier_u2phy_probe, | 
|  | .driver = { | 
|  | .name = "uniphier-usb2-phy", | 
|  | .of_match_table = uniphier_u2phy_match, | 
|  | }, | 
|  | }; | 
|  | module_platform_driver(uniphier_u2phy_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>"); | 
|  | MODULE_DESCRIPTION("UniPhier PHY driver for USB2 controller"); | 
|  | MODULE_LICENSE("GPL v2"); |