| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * Zynq clock controller | 
 |  * | 
 |  *  Copyright (C) 2012 - 2013 Xilinx | 
 |  * | 
 |  *  Sören Brinkmann <soren.brinkmann@xilinx.com> | 
 |  */ | 
 |  | 
 | #include <linux/clk/zynq.h> | 
 | #include <linux/clk.h> | 
 | #include <linux/clk-provider.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_address.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/string.h> | 
 | #include <linux/io.h> | 
 |  | 
 | static void __iomem *zynq_clkc_base; | 
 |  | 
 | #define SLCR_ARMPLL_CTRL		(zynq_clkc_base + 0x00) | 
 | #define SLCR_DDRPLL_CTRL		(zynq_clkc_base + 0x04) | 
 | #define SLCR_IOPLL_CTRL			(zynq_clkc_base + 0x08) | 
 | #define SLCR_PLL_STATUS			(zynq_clkc_base + 0x0c) | 
 | #define SLCR_ARM_CLK_CTRL		(zynq_clkc_base + 0x20) | 
 | #define SLCR_DDR_CLK_CTRL		(zynq_clkc_base + 0x24) | 
 | #define SLCR_DCI_CLK_CTRL		(zynq_clkc_base + 0x28) | 
 | #define SLCR_APER_CLK_CTRL		(zynq_clkc_base + 0x2c) | 
 | #define SLCR_GEM0_CLK_CTRL		(zynq_clkc_base + 0x40) | 
 | #define SLCR_GEM1_CLK_CTRL		(zynq_clkc_base + 0x44) | 
 | #define SLCR_SMC_CLK_CTRL		(zynq_clkc_base + 0x48) | 
 | #define SLCR_LQSPI_CLK_CTRL		(zynq_clkc_base + 0x4c) | 
 | #define SLCR_SDIO_CLK_CTRL		(zynq_clkc_base + 0x50) | 
 | #define SLCR_UART_CLK_CTRL		(zynq_clkc_base + 0x54) | 
 | #define SLCR_SPI_CLK_CTRL		(zynq_clkc_base + 0x58) | 
 | #define SLCR_CAN_CLK_CTRL		(zynq_clkc_base + 0x5c) | 
 | #define SLCR_CAN_MIOCLK_CTRL		(zynq_clkc_base + 0x60) | 
 | #define SLCR_DBG_CLK_CTRL		(zynq_clkc_base + 0x64) | 
 | #define SLCR_PCAP_CLK_CTRL		(zynq_clkc_base + 0x68) | 
 | #define SLCR_FPGA0_CLK_CTRL		(zynq_clkc_base + 0x70) | 
 | #define SLCR_621_TRUE			(zynq_clkc_base + 0xc4) | 
 | #define SLCR_SWDT_CLK_SEL		(zynq_clkc_base + 0x204) | 
 |  | 
 | #define NUM_MIO_PINS	54 | 
 | #define CLK_NAME_LEN	16 | 
 |  | 
 | #define DBG_CLK_CTRL_CLKACT_TRC		BIT(0) | 
 | #define DBG_CLK_CTRL_CPU_1XCLKACT	BIT(1) | 
 |  | 
 | enum zynq_clk { | 
 | 	armpll, ddrpll, iopll, | 
 | 	cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x, | 
 | 	ddr2x, ddr3x, dci, | 
 | 	lqspi, smc, pcap, gem0, gem1, fclk0, fclk1, fclk2, fclk3, can0, can1, | 
 | 	sdio0, sdio1, uart0, uart1, spi0, spi1, dma, | 
 | 	usb0_aper, usb1_aper, gem0_aper, gem1_aper, | 
 | 	sdio0_aper, sdio1_aper, spi0_aper, spi1_aper, can0_aper, can1_aper, | 
 | 	i2c0_aper, i2c1_aper, uart0_aper, uart1_aper, gpio_aper, lqspi_aper, | 
 | 	smc_aper, swdt, dbg_trc, dbg_apb, clk_max}; | 
 |  | 
 | static struct clk *ps_clk; | 
 | static struct clk *clks[clk_max]; | 
 | static struct clk_onecell_data clk_data; | 
 |  | 
 | static DEFINE_SPINLOCK(armpll_lock); | 
 | static DEFINE_SPINLOCK(ddrpll_lock); | 
 | static DEFINE_SPINLOCK(iopll_lock); | 
 | static DEFINE_SPINLOCK(armclk_lock); | 
 | static DEFINE_SPINLOCK(swdtclk_lock); | 
 | static DEFINE_SPINLOCK(ddrclk_lock); | 
 | static DEFINE_SPINLOCK(dciclk_lock); | 
 | static DEFINE_SPINLOCK(gem0clk_lock); | 
 | static DEFINE_SPINLOCK(gem1clk_lock); | 
 | static DEFINE_SPINLOCK(canclk_lock); | 
 | static DEFINE_SPINLOCK(canmioclk_lock); | 
 | static DEFINE_SPINLOCK(dbgclk_lock); | 
 | static DEFINE_SPINLOCK(aperclk_lock); | 
 |  | 
 | static const char *const armpll_parents[] __initconst = {"armpll_int", | 
 | 	"ps_clk"}; | 
 | static const char *const ddrpll_parents[] __initconst = {"ddrpll_int", | 
 | 	"ps_clk"}; | 
 | static const char *const iopll_parents[] __initconst = {"iopll_int", | 
 | 	"ps_clk"}; | 
 | static const char *gem0_mux_parents[] __initdata = {"gem0_div1", "dummy_name"}; | 
 | static const char *gem1_mux_parents[] __initdata = {"gem1_div1", "dummy_name"}; | 
 | static const char *const can0_mio_mux2_parents[] __initconst = {"can0_gate", | 
 | 	"can0_mio_mux"}; | 
 | static const char *const can1_mio_mux2_parents[] __initconst = {"can1_gate", | 
 | 	"can1_mio_mux"}; | 
 | static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div", | 
 | 	"dummy_name"}; | 
 |  | 
 | static const char *const dbgtrc_emio_input_names[] __initconst = { | 
 | 	"trace_emio_clk"}; | 
 | static const char *const gem0_emio_input_names[] __initconst = { | 
 | 	"gem0_emio_clk"}; | 
 | static const char *const gem1_emio_input_names[] __initconst = { | 
 | 	"gem1_emio_clk"}; | 
 | static const char *const swdt_ext_clk_input_names[] __initconst = { | 
 | 	"swdt_ext_clk"}; | 
 |  | 
 | static void __init zynq_clk_register_fclk(enum zynq_clk fclk, | 
 | 		const char *clk_name, void __iomem *fclk_ctrl_reg, | 
 | 		const char **parents, int enable) | 
 | { | 
 | 	u32 enable_reg; | 
 | 	char *mux_name; | 
 | 	char *div0_name; | 
 | 	char *div1_name; | 
 | 	spinlock_t *fclk_lock; | 
 | 	spinlock_t *fclk_gate_lock; | 
 | 	void __iomem *fclk_gate_reg = fclk_ctrl_reg + 8; | 
 |  | 
 | 	fclk_lock = kmalloc(sizeof(*fclk_lock), GFP_KERNEL); | 
 | 	if (!fclk_lock) | 
 | 		goto err; | 
 | 	fclk_gate_lock = kmalloc(sizeof(*fclk_gate_lock), GFP_KERNEL); | 
 | 	if (!fclk_gate_lock) | 
 | 		goto err_fclk_gate_lock; | 
 | 	spin_lock_init(fclk_lock); | 
 | 	spin_lock_init(fclk_gate_lock); | 
 |  | 
 | 	mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name); | 
 | 	if (!mux_name) | 
 | 		goto err_mux_name; | 
 | 	div0_name = kasprintf(GFP_KERNEL, "%s_div0", clk_name); | 
 | 	if (!div0_name) | 
 | 		goto err_div0_name; | 
 | 	div1_name = kasprintf(GFP_KERNEL, "%s_div1", clk_name); | 
 | 	if (!div1_name) | 
 | 		goto err_div1_name; | 
 |  | 
 | 	clk_register_mux(NULL, mux_name, parents, 4, | 
 | 			CLK_SET_RATE_NO_REPARENT, fclk_ctrl_reg, 4, 2, 0, | 
 | 			fclk_lock); | 
 |  | 
 | 	clk_register_divider(NULL, div0_name, mux_name, | 
 | 			0, fclk_ctrl_reg, 8, 6, CLK_DIVIDER_ONE_BASED | | 
 | 			CLK_DIVIDER_ALLOW_ZERO, fclk_lock); | 
 |  | 
 | 	clk_register_divider(NULL, div1_name, div0_name, | 
 | 			CLK_SET_RATE_PARENT, fclk_ctrl_reg, 20, 6, | 
 | 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, | 
 | 			fclk_lock); | 
 |  | 
 | 	clks[fclk] = clk_register_gate(NULL, clk_name, | 
 | 			div1_name, CLK_SET_RATE_PARENT, fclk_gate_reg, | 
 | 			0, CLK_GATE_SET_TO_DISABLE, fclk_gate_lock); | 
 | 	enable_reg = readl(fclk_gate_reg) & 1; | 
 | 	if (enable && !enable_reg) { | 
 | 		if (clk_prepare_enable(clks[fclk])) | 
 | 			pr_warn("%s: FCLK%u enable failed\n", __func__, | 
 | 					fclk - fclk0); | 
 | 	} | 
 | 	kfree(mux_name); | 
 | 	kfree(div0_name); | 
 | 	kfree(div1_name); | 
 |  | 
 | 	return; | 
 |  | 
 | err_div1_name: | 
 | 	kfree(div0_name); | 
 | err_div0_name: | 
 | 	kfree(mux_name); | 
 | err_mux_name: | 
 | 	kfree(fclk_gate_lock); | 
 | err_fclk_gate_lock: | 
 | 	kfree(fclk_lock); | 
 | err: | 
 | 	clks[fclk] = ERR_PTR(-ENOMEM); | 
 | } | 
 |  | 
 | static void __init zynq_clk_register_periph_clk(enum zynq_clk clk0, | 
 | 		enum zynq_clk clk1, const char *clk_name0, | 
 | 		const char *clk_name1, void __iomem *clk_ctrl, | 
 | 		const char **parents, unsigned int two_gates) | 
 | { | 
 | 	char *mux_name; | 
 | 	char *div_name; | 
 | 	spinlock_t *lock; | 
 |  | 
 | 	lock = kmalloc(sizeof(*lock), GFP_KERNEL); | 
 | 	if (!lock) | 
 | 		goto err; | 
 | 	spin_lock_init(lock); | 
 |  | 
 | 	mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name0); | 
 | 	div_name = kasprintf(GFP_KERNEL, "%s_div", clk_name0); | 
 |  | 
 | 	clk_register_mux(NULL, mux_name, parents, 4, | 
 | 			CLK_SET_RATE_NO_REPARENT, clk_ctrl, 4, 2, 0, lock); | 
 |  | 
 | 	clk_register_divider(NULL, div_name, mux_name, 0, clk_ctrl, 8, 6, | 
 | 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, lock); | 
 |  | 
 | 	clks[clk0] = clk_register_gate(NULL, clk_name0, div_name, | 
 | 			CLK_SET_RATE_PARENT, clk_ctrl, 0, 0, lock); | 
 | 	if (two_gates) | 
 | 		clks[clk1] = clk_register_gate(NULL, clk_name1, div_name, | 
 | 				CLK_SET_RATE_PARENT, clk_ctrl, 1, 0, lock); | 
 |  | 
 | 	kfree(mux_name); | 
 | 	kfree(div_name); | 
 |  | 
 | 	return; | 
 |  | 
 | err: | 
 | 	clks[clk0] = ERR_PTR(-ENOMEM); | 
 | 	if (two_gates) | 
 | 		clks[clk1] = ERR_PTR(-ENOMEM); | 
 | } | 
 |  | 
 | static void __init zynq_clk_setup(struct device_node *np) | 
 | { | 
 | 	int i; | 
 | 	u32 tmp; | 
 | 	int ret; | 
 | 	char clk_name[CLK_NAME_LEN]; | 
 | 	unsigned int fclk_enable = 0; | 
 | 	const char *clk_output_name[clk_max]; | 
 | 	const char *cpu_parents[4]; | 
 | 	const char *periph_parents[4]; | 
 | 	const char *swdt_ext_clk_mux_parents[2]; | 
 | 	const char *can_mio_mux_parents[NUM_MIO_PINS]; | 
 | 	const char *dummy_nm = "dummy_name"; | 
 |  | 
 | 	pr_info("Zynq clock init\n"); | 
 |  | 
 | 	/* get clock output names from DT */ | 
 | 	for (i = 0; i < clk_max; i++) { | 
 | 		if (of_property_read_string_index(np, "clock-output-names", | 
 | 				  i, &clk_output_name[i])) { | 
 | 			pr_err("%s: clock output name not in DT\n", __func__); | 
 | 			BUG(); | 
 | 		} | 
 | 	} | 
 | 	cpu_parents[0] = clk_output_name[armpll]; | 
 | 	cpu_parents[1] = clk_output_name[armpll]; | 
 | 	cpu_parents[2] = clk_output_name[ddrpll]; | 
 | 	cpu_parents[3] = clk_output_name[iopll]; | 
 | 	periph_parents[0] = clk_output_name[iopll]; | 
 | 	periph_parents[1] = clk_output_name[iopll]; | 
 | 	periph_parents[2] = clk_output_name[armpll]; | 
 | 	periph_parents[3] = clk_output_name[ddrpll]; | 
 |  | 
 | 	of_property_read_u32(np, "fclk-enable", &fclk_enable); | 
 |  | 
 | 	/* ps_clk */ | 
 | 	ret = of_property_read_u32(np, "ps-clk-frequency", &tmp); | 
 | 	if (ret) { | 
 | 		pr_warn("ps_clk frequency not specified, using 33 MHz.\n"); | 
 | 		tmp = 33333333; | 
 | 	} | 
 | 	ps_clk = clk_register_fixed_rate(NULL, "ps_clk", NULL, 0, tmp); | 
 |  | 
 | 	/* PLLs */ | 
 | 	clk_register_zynq_pll("armpll_int", "ps_clk", SLCR_ARMPLL_CTRL, | 
 | 			SLCR_PLL_STATUS, 0, &armpll_lock); | 
 | 	clks[armpll] = clk_register_mux(NULL, clk_output_name[armpll], | 
 | 			armpll_parents, 2, CLK_SET_RATE_NO_REPARENT, | 
 | 			SLCR_ARMPLL_CTRL, 4, 1, 0, &armpll_lock); | 
 |  | 
 | 	clk_register_zynq_pll("ddrpll_int", "ps_clk", SLCR_DDRPLL_CTRL, | 
 | 			SLCR_PLL_STATUS, 1, &ddrpll_lock); | 
 | 	clks[ddrpll] = clk_register_mux(NULL, clk_output_name[ddrpll], | 
 | 			ddrpll_parents, 2, CLK_SET_RATE_NO_REPARENT, | 
 | 			SLCR_DDRPLL_CTRL, 4, 1, 0, &ddrpll_lock); | 
 |  | 
 | 	clk_register_zynq_pll("iopll_int", "ps_clk", SLCR_IOPLL_CTRL, | 
 | 			SLCR_PLL_STATUS, 2, &iopll_lock); | 
 | 	clks[iopll] = clk_register_mux(NULL, clk_output_name[iopll], | 
 | 			iopll_parents, 2, CLK_SET_RATE_NO_REPARENT, | 
 | 			SLCR_IOPLL_CTRL, 4, 1, 0, &iopll_lock); | 
 |  | 
 | 	/* CPU clocks */ | 
 | 	tmp = readl(SLCR_621_TRUE) & 1; | 
 | 	clk_register_mux(NULL, "cpu_mux", cpu_parents, 4, | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_ARM_CLK_CTRL, 4, 2, 0, | 
 | 			&armclk_lock); | 
 | 	clk_register_divider(NULL, "cpu_div", "cpu_mux", 0, | 
 | 			SLCR_ARM_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | | 
 | 			CLK_DIVIDER_ALLOW_ZERO, &armclk_lock); | 
 |  | 
 | 	clks[cpu_6or4x] = clk_register_gate(NULL, clk_output_name[cpu_6or4x], | 
 | 			"cpu_div", CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, | 
 | 			SLCR_ARM_CLK_CTRL, 24, 0, &armclk_lock); | 
 |  | 
 | 	clk_register_fixed_factor(NULL, "cpu_3or2x_div", "cpu_div", 0, | 
 | 			1, 2); | 
 | 	clks[cpu_3or2x] = clk_register_gate(NULL, clk_output_name[cpu_3or2x], | 
 | 			"cpu_3or2x_div", CLK_IGNORE_UNUSED, | 
 | 			SLCR_ARM_CLK_CTRL, 25, 0, &armclk_lock); | 
 |  | 
 | 	clk_register_fixed_factor(NULL, "cpu_2x_div", "cpu_div", 0, 1, | 
 | 			2 + tmp); | 
 | 	clks[cpu_2x] = clk_register_gate(NULL, clk_output_name[cpu_2x], | 
 | 			"cpu_2x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, | 
 | 			26, 0, &armclk_lock); | 
 | 	clk_prepare_enable(clks[cpu_2x]); | 
 |  | 
 | 	clk_register_fixed_factor(NULL, "cpu_1x_div", "cpu_div", 0, 1, | 
 | 			4 + 2 * tmp); | 
 | 	clks[cpu_1x] = clk_register_gate(NULL, clk_output_name[cpu_1x], | 
 | 			"cpu_1x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, 27, | 
 | 			0, &armclk_lock); | 
 |  | 
 | 	/* Timers */ | 
 | 	swdt_ext_clk_mux_parents[0] = clk_output_name[cpu_1x]; | 
 | 	for (i = 0; i < ARRAY_SIZE(swdt_ext_clk_input_names); i++) { | 
 | 		int idx = of_property_match_string(np, "clock-names", | 
 | 				swdt_ext_clk_input_names[i]); | 
 | 		if (idx >= 0) | 
 | 			swdt_ext_clk_mux_parents[i + 1] = | 
 | 				of_clk_get_parent_name(np, idx); | 
 | 		else | 
 | 			swdt_ext_clk_mux_parents[i + 1] = dummy_nm; | 
 | 	} | 
 | 	clks[swdt] = clk_register_mux(NULL, clk_output_name[swdt], | 
 | 			swdt_ext_clk_mux_parents, 2, CLK_SET_RATE_PARENT | | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_SWDT_CLK_SEL, 0, 1, 0, | 
 | 			&swdtclk_lock); | 
 |  | 
 | 	/* DDR clocks */ | 
 | 	clk_register_divider(NULL, "ddr2x_div", "ddrpll", 0, | 
 | 			SLCR_DDR_CLK_CTRL, 26, 6, CLK_DIVIDER_ONE_BASED | | 
 | 			CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); | 
 | 	clks[ddr2x] = clk_register_gate(NULL, clk_output_name[ddr2x], | 
 | 			"ddr2x_div", 0, SLCR_DDR_CLK_CTRL, 1, 0, &ddrclk_lock); | 
 | 	clk_prepare_enable(clks[ddr2x]); | 
 | 	clk_register_divider(NULL, "ddr3x_div", "ddrpll", 0, | 
 | 			SLCR_DDR_CLK_CTRL, 20, 6, CLK_DIVIDER_ONE_BASED | | 
 | 			CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); | 
 | 	clks[ddr3x] = clk_register_gate(NULL, clk_output_name[ddr3x], | 
 | 			"ddr3x_div", 0, SLCR_DDR_CLK_CTRL, 0, 0, &ddrclk_lock); | 
 | 	clk_prepare_enable(clks[ddr3x]); | 
 |  | 
 | 	clk_register_divider(NULL, "dci_div0", "ddrpll", 0, | 
 | 			SLCR_DCI_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | | 
 | 			CLK_DIVIDER_ALLOW_ZERO, &dciclk_lock); | 
 | 	clk_register_divider(NULL, "dci_div1", "dci_div0", | 
 | 			CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 20, 6, | 
 | 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, | 
 | 			&dciclk_lock); | 
 | 	clks[dci] = clk_register_gate(NULL, clk_output_name[dci], "dci_div1", | 
 | 			CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 0, 0, | 
 | 			&dciclk_lock); | 
 | 	clk_prepare_enable(clks[dci]); | 
 |  | 
 | 	/* Peripheral clocks */ | 
 | 	for (i = fclk0; i <= fclk3; i++) { | 
 | 		int enable = !!(fclk_enable & BIT(i - fclk0)); | 
 |  | 
 | 		zynq_clk_register_fclk(i, clk_output_name[i], | 
 | 				SLCR_FPGA0_CLK_CTRL + 0x10 * (i - fclk0), | 
 | 				periph_parents, enable); | 
 | 	} | 
 |  | 
 | 	zynq_clk_register_periph_clk(lqspi, clk_max, clk_output_name[lqspi], NULL, | 
 | 				     SLCR_LQSPI_CLK_CTRL, periph_parents, 0); | 
 |  | 
 | 	zynq_clk_register_periph_clk(smc, clk_max, clk_output_name[smc], NULL, | 
 | 				     SLCR_SMC_CLK_CTRL, periph_parents, 0); | 
 |  | 
 | 	zynq_clk_register_periph_clk(pcap, clk_max, clk_output_name[pcap], NULL, | 
 | 				     SLCR_PCAP_CLK_CTRL, periph_parents, 0); | 
 |  | 
 | 	zynq_clk_register_periph_clk(sdio0, sdio1, clk_output_name[sdio0], | 
 | 			clk_output_name[sdio1], SLCR_SDIO_CLK_CTRL, | 
 | 			periph_parents, 1); | 
 |  | 
 | 	zynq_clk_register_periph_clk(uart0, uart1, clk_output_name[uart0], | 
 | 			clk_output_name[uart1], SLCR_UART_CLK_CTRL, | 
 | 			periph_parents, 1); | 
 |  | 
 | 	zynq_clk_register_periph_clk(spi0, spi1, clk_output_name[spi0], | 
 | 			clk_output_name[spi1], SLCR_SPI_CLK_CTRL, | 
 | 			periph_parents, 1); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(gem0_emio_input_names); i++) { | 
 | 		int idx = of_property_match_string(np, "clock-names", | 
 | 				gem0_emio_input_names[i]); | 
 | 		if (idx >= 0) | 
 | 			gem0_mux_parents[i + 1] = of_clk_get_parent_name(np, | 
 | 					idx); | 
 | 	} | 
 | 	clk_register_mux(NULL, "gem0_mux", periph_parents, 4, | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_GEM0_CLK_CTRL, 4, 2, 0, | 
 | 			&gem0clk_lock); | 
 | 	clk_register_divider(NULL, "gem0_div0", "gem0_mux", 0, | 
 | 			SLCR_GEM0_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | | 
 | 			CLK_DIVIDER_ALLOW_ZERO, &gem0clk_lock); | 
 | 	clk_register_divider(NULL, "gem0_div1", "gem0_div0", | 
 | 			CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6, | 
 | 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, | 
 | 			&gem0clk_lock); | 
 | 	clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, | 
 | 			CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT, | 
 | 			SLCR_GEM0_CLK_CTRL, 6, 1, 0, | 
 | 			&gem0clk_lock); | 
 | 	clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0], | 
 | 			"gem0_emio_mux", CLK_SET_RATE_PARENT, | 
 | 			SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(gem1_emio_input_names); i++) { | 
 | 		int idx = of_property_match_string(np, "clock-names", | 
 | 				gem1_emio_input_names[i]); | 
 | 		if (idx >= 0) | 
 | 			gem1_mux_parents[i + 1] = of_clk_get_parent_name(np, | 
 | 					idx); | 
 | 	} | 
 | 	clk_register_mux(NULL, "gem1_mux", periph_parents, 4, | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_GEM1_CLK_CTRL, 4, 2, 0, | 
 | 			&gem1clk_lock); | 
 | 	clk_register_divider(NULL, "gem1_div0", "gem1_mux", 0, | 
 | 			SLCR_GEM1_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | | 
 | 			CLK_DIVIDER_ALLOW_ZERO, &gem1clk_lock); | 
 | 	clk_register_divider(NULL, "gem1_div1", "gem1_div0", | 
 | 			CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6, | 
 | 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, | 
 | 			&gem1clk_lock); | 
 | 	clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, | 
 | 			CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT, | 
 | 			SLCR_GEM1_CLK_CTRL, 6, 1, 0, | 
 | 			&gem1clk_lock); | 
 | 	clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1], | 
 | 			"gem1_emio_mux", CLK_SET_RATE_PARENT, | 
 | 			SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock); | 
 |  | 
 | 	for (i = 0; i < NUM_MIO_PINS; i++) { | 
 | 		int idx; | 
 |  | 
 | 		snprintf(clk_name, CLK_NAME_LEN, "mio_clk_%2.2d", i); | 
 | 		idx = of_property_match_string(np, "clock-names", clk_name); | 
 | 		if (idx >= 0) | 
 | 			can_mio_mux_parents[i] = of_clk_get_parent_name(np, | 
 | 						idx); | 
 | 		else | 
 | 			can_mio_mux_parents[i] = dummy_nm; | 
 | 	} | 
 | 	clk_register_mux(NULL, "can_mux", periph_parents, 4, | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_CLK_CTRL, 4, 2, 0, | 
 | 			&canclk_lock); | 
 | 	clk_register_divider(NULL, "can_div0", "can_mux", 0, | 
 | 			SLCR_CAN_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | | 
 | 			CLK_DIVIDER_ALLOW_ZERO, &canclk_lock); | 
 | 	clk_register_divider(NULL, "can_div1", "can_div0", | 
 | 			CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 20, 6, | 
 | 			CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, | 
 | 			&canclk_lock); | 
 | 	clk_register_gate(NULL, "can0_gate", "can_div1", | 
 | 			CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 0, 0, | 
 | 			&canclk_lock); | 
 | 	clk_register_gate(NULL, "can1_gate", "can_div1", | 
 | 			CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 1, 0, | 
 | 			&canclk_lock); | 
 | 	clk_register_mux(NULL, "can0_mio_mux", | 
 | 			can_mio_mux_parents, 54, CLK_SET_RATE_PARENT | | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 0, 6, 0, | 
 | 			&canmioclk_lock); | 
 | 	clk_register_mux(NULL, "can1_mio_mux", | 
 | 			can_mio_mux_parents, 54, CLK_SET_RATE_PARENT | | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 16, 6, | 
 | 			0, &canmioclk_lock); | 
 | 	clks[can0] = clk_register_mux(NULL, clk_output_name[can0], | 
 | 			can0_mio_mux2_parents, 2, CLK_SET_RATE_PARENT | | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 6, 1, 0, | 
 | 			&canmioclk_lock); | 
 | 	clks[can1] = clk_register_mux(NULL, clk_output_name[can1], | 
 | 			can1_mio_mux2_parents, 2, CLK_SET_RATE_PARENT | | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_CAN_MIOCLK_CTRL, 22, 1, | 
 | 			0, &canmioclk_lock); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(dbgtrc_emio_input_names); i++) { | 
 | 		int idx = of_property_match_string(np, "clock-names", | 
 | 				dbgtrc_emio_input_names[i]); | 
 | 		if (idx >= 0) | 
 | 			dbg_emio_mux_parents[i + 1] = of_clk_get_parent_name(np, | 
 | 					idx); | 
 | 	} | 
 | 	clk_register_mux(NULL, "dbg_mux", periph_parents, 4, | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_DBG_CLK_CTRL, 4, 2, 0, | 
 | 			&dbgclk_lock); | 
 | 	clk_register_divider(NULL, "dbg_div", "dbg_mux", 0, | 
 | 			SLCR_DBG_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | | 
 | 			CLK_DIVIDER_ALLOW_ZERO, &dbgclk_lock); | 
 | 	clk_register_mux(NULL, "dbg_emio_mux", dbg_emio_mux_parents, 2, | 
 | 			CLK_SET_RATE_NO_REPARENT, SLCR_DBG_CLK_CTRL, 6, 1, 0, | 
 | 			&dbgclk_lock); | 
 | 	clks[dbg_trc] = clk_register_gate(NULL, clk_output_name[dbg_trc], | 
 | 			"dbg_emio_mux", CLK_SET_RATE_PARENT, SLCR_DBG_CLK_CTRL, | 
 | 			0, 0, &dbgclk_lock); | 
 | 	clks[dbg_apb] = clk_register_gate(NULL, clk_output_name[dbg_apb], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0, | 
 | 			&dbgclk_lock); | 
 |  | 
 | 	/* leave debug clocks in the state the bootloader set them up to */ | 
 | 	tmp = readl(SLCR_DBG_CLK_CTRL); | 
 | 	if (tmp & DBG_CLK_CTRL_CLKACT_TRC) | 
 | 		if (clk_prepare_enable(clks[dbg_trc])) | 
 | 			pr_warn("%s: trace clk enable failed\n", __func__); | 
 | 	if (tmp & DBG_CLK_CTRL_CPU_1XCLKACT) | 
 | 		if (clk_prepare_enable(clks[dbg_apb])) | 
 | 			pr_warn("%s: debug APB clk enable failed\n", __func__); | 
 |  | 
 | 	/* One gated clock for all APER clocks. */ | 
 | 	clks[dma] = clk_register_gate(NULL, clk_output_name[dma], | 
 | 			clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[usb0_aper] = clk_register_gate(NULL, clk_output_name[usb0_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 2, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[usb1_aper] = clk_register_gate(NULL, clk_output_name[usb1_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 3, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[gem0_aper] = clk_register_gate(NULL, clk_output_name[gem0_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 6, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[gem1_aper] = clk_register_gate(NULL, clk_output_name[gem1_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 7, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[sdio0_aper] = clk_register_gate(NULL, clk_output_name[sdio0_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 10, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[sdio1_aper] = clk_register_gate(NULL, clk_output_name[sdio1_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 11, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[spi0_aper] = clk_register_gate(NULL, clk_output_name[spi0_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 14, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[spi1_aper] = clk_register_gate(NULL, clk_output_name[spi1_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 15, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[can0_aper] = clk_register_gate(NULL, clk_output_name[can0_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 16, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[can1_aper] = clk_register_gate(NULL, clk_output_name[can1_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 17, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[i2c0_aper] = clk_register_gate(NULL, clk_output_name[i2c0_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 18, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[i2c1_aper] = clk_register_gate(NULL, clk_output_name[i2c1_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 19, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[uart0_aper] = clk_register_gate(NULL, clk_output_name[uart0_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 20, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[uart1_aper] = clk_register_gate(NULL, clk_output_name[uart1_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 21, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[gpio_aper] = clk_register_gate(NULL, clk_output_name[gpio_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 22, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[lqspi_aper] = clk_register_gate(NULL, clk_output_name[lqspi_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 23, 0, | 
 | 			&aperclk_lock); | 
 | 	clks[smc_aper] = clk_register_gate(NULL, clk_output_name[smc_aper], | 
 | 			clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 24, 0, | 
 | 			&aperclk_lock); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(clks); i++) { | 
 | 		if (IS_ERR(clks[i])) { | 
 | 			pr_err("Zynq clk %d: register failed with %ld\n", | 
 | 			       i, PTR_ERR(clks[i])); | 
 | 			BUG(); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	clk_data.clks = clks; | 
 | 	clk_data.clk_num = ARRAY_SIZE(clks); | 
 | 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); | 
 | } | 
 |  | 
 | CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup); | 
 |  | 
 | void __init zynq_clock_init(void) | 
 | { | 
 | 	struct device_node *np; | 
 | 	struct device_node *slcr; | 
 | 	struct resource res; | 
 |  | 
 | 	np = of_find_compatible_node(NULL, NULL, "xlnx,ps7-clkc"); | 
 | 	if (!np) { | 
 | 		pr_err("%s: clkc node not found\n", __func__); | 
 | 		goto np_err; | 
 | 	} | 
 |  | 
 | 	if (of_address_to_resource(np, 0, &res)) { | 
 | 		pr_err("%pOFn: failed to get resource\n", np); | 
 | 		goto np_err; | 
 | 	} | 
 |  | 
 | 	slcr = of_get_parent(np); | 
 |  | 
 | 	if (slcr->data) { | 
 | 		zynq_clkc_base = (__force void __iomem *)slcr->data + res.start; | 
 | 	} else { | 
 | 		pr_err("%pOFn: Unable to get I/O memory\n", np); | 
 | 		of_node_put(slcr); | 
 | 		goto np_err; | 
 | 	} | 
 |  | 
 | 	pr_info("%s: clkc starts at %p\n", __func__, zynq_clkc_base); | 
 |  | 
 | 	of_node_put(slcr); | 
 | 	of_node_put(np); | 
 |  | 
 | 	return; | 
 |  | 
 | np_err: | 
 | 	of_node_put(np); | 
 | 	BUG(); | 
 | } |