| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/truly,nt35597-2K-display.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Truly NT35597 DSI 2K display |
| |
| maintainers: |
| - Neil Armstrong <neil.armstrong@linaro.org> |
| |
| description: | |
| Truly NT35597 DSI 2K display is used on the Qualcomm SDM845 MTP board. |
| |
| allOf: |
| - $ref: panel-common-dual.yaml# |
| |
| properties: |
| compatible: |
| const: truly,nt35597-2K-display |
| |
| reg: |
| maxItems: 1 |
| |
| vdda-supply: |
| description: regulator that provides the supply voltage Power IC supply |
| |
| vdispp-supply: |
| description: regulator that provides the supply voltage for positive LCD bias |
| |
| vdispn-supply: |
| description: regulator that provides the supply voltage for negative LCD bias |
| |
| reset-gpios: true |
| |
| mode-gpios: |
| description: |
| Gpio for choosing the mode of the display for single DSI or Dual DSI. |
| This should be low for dual DSI and high for single DSI mode. |
| |
| ports: |
| required: |
| - port@0 |
| - port@1 |
| |
| required: |
| - compatible |
| - reg |
| - vdda-supply |
| - reset-gpios |
| - mode-gpios |
| - ports |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| panel@0 { |
| compatible = "truly,nt35597-2K-display"; |
| reg = <0>; |
| |
| vdda-supply = <&pm8998_l14>; |
| vdispp-supply = <&lab_regulator>; |
| vdispn-supply = <&ibb_regulator>; |
| |
| reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; |
| mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| panel0_in: endpoint { |
| remote-endpoint = <&dsi0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| panel1_in: endpoint { |
| remote-endpoint = <&dsi1_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| ... |
