| # SPDX-License-Identifier: GPL-2.0-only |
| menu "TI OMAP/AM/DM/DRA Family" |
| depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 |
| |
| config OMAP_HWMOD |
| bool |
| |
| config ARCH_OMAP2 |
| bool "TI OMAP2" |
| depends on ARCH_MULTI_V6 |
| select ARCH_OMAP2PLUS |
| select CPU_V6 |
| select OMAP_HWMOD |
| select SOC_HAS_OMAP2_SDRC |
| |
| config ARCH_OMAP3 |
| bool "TI OMAP3" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARM_CPU_SUSPEND |
| select OMAP_HWMOD |
| select OMAP_INTERCONNECT |
| select PM_OPP |
| select SOC_HAS_OMAP2_SDRC |
| select ARM_ERRATA_430973 |
| |
| config ARCH_OMAP4 |
| bool "TI OMAP4" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP |
| select ARM_CPU_SUSPEND |
| select ARM_ERRATA_720789 |
| select ARM_GIC |
| select HAVE_ARM_SCU if SMP |
| select HAVE_ARM_TWD if SMP |
| select OMAP_INTERCONNECT |
| select OMAP_INTERCONNECT_BARRIER |
| select PL310_ERRATA_588369 if CACHE_L2X0 |
| select PL310_ERRATA_727915 if CACHE_L2X0 |
| select PM_OPP |
| select PM if CPU_IDLE |
| select ARM_ERRATA_754322 |
| select ARM_ERRATA_775420 |
| select OMAP_INTERCONNECT |
| |
| config SOC_OMAP5 |
| bool "TI OMAP5" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARM_CPU_SUSPEND |
| select ARM_GIC |
| select HAVE_ARM_SCU if SMP |
| select HAVE_ARM_ARCH_TIMER |
| select ARM_ERRATA_798181 if SMP |
| select OMAP_INTERCONNECT |
| select OMAP_INTERCONNECT_BARRIER |
| select PM_OPP |
| select ZONE_DMA if ARM_LPAE |
| |
| config SOC_AM33XX |
| bool "TI AM33XX" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARM_CPU_SUSPEND |
| |
| config SOC_AM43XX |
| bool "TI AM43x" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARM_GIC |
| select MACH_OMAP_GENERIC |
| select HAVE_ARM_SCU |
| select GENERIC_CLOCKEVENTS_BROADCAST |
| select HAVE_ARM_TWD |
| select ARM_ERRATA_754322 |
| select ARM_ERRATA_775420 |
| select OMAP_INTERCONNECT |
| select ARM_CPU_SUSPEND |
| |
| config SOC_DRA7XX |
| bool "TI DRA7XX" |
| depends on ARCH_MULTI_V7 |
| select ARCH_OMAP2PLUS |
| select ARM_CPU_SUSPEND |
| select ARM_GIC |
| select HAVE_ARM_SCU if SMP |
| select HAVE_ARM_ARCH_TIMER |
| select IRQ_CROSSBAR |
| select ARM_ERRATA_798181 if SMP |
| select OMAP_INTERCONNECT |
| select OMAP_INTERCONNECT_BARRIER |
| select PM_OPP |
| select ZONE_DMA if ARM_LPAE |
| select PINCTRL_TI_IODELAY if OF && PINCTRL |
| |
| config ARCH_OMAP2PLUS |
| bool |
| select ARCH_HAS_BANDGAP |
| select ARCH_HAS_RESET_CONTROLLER |
| select ARCH_OMAP |
| select CLKSRC_MMIO |
| select GENERIC_IRQ_CHIP |
| select GPIOLIB |
| select MACH_OMAP_GENERIC |
| select MEMORY |
| select MFD_SYSCON |
| select OMAP_DM_SYSTIMER |
| select OMAP_DM_TIMER |
| select OMAP_GPMC |
| select PINCTRL |
| select PM |
| select PM_GENERIC_DOMAINS |
| select PM_GENERIC_DOMAINS_OF |
| select RESET_CONTROLLER |
| select SOC_BUS |
| select TI_SYSC |
| select OMAP_IRQCHIP |
| select CLKSRC_TI_32K |
| help |
| Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 |
| |
| config OMAP_INTERCONNECT_BARRIER |
| bool |
| select ARM_HEAVY_MB |
| |
| config ARCH_OMAP |
| bool |
| |
| if ARCH_OMAP2PLUS |
| |
| menu "TI OMAP2/3/4 Specific Features" |
| |
| config ARCH_OMAP2PLUS_TYPICAL |
| bool "Typical OMAP configuration" |
| default y |
| select AEABI |
| select HIGHMEM |
| select I2C |
| select I2C_OMAP |
| select MENELAUS if ARCH_OMAP2 |
| select NEON if CPU_V7 |
| select REGULATOR |
| select REGULATOR_FIXED_VOLTAGE |
| select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 |
| select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 |
| select VFP |
| help |
| Compile a kernel suitable for booting most boards |
| |
| config SOC_HAS_OMAP2_SDRC |
| bool "OMAP2 SDRAM Controller support" |
| |
| config SOC_HAS_REALTIME_COUNTER |
| bool "Real time free running counter" |
| depends on SOC_OMAP5 || SOC_DRA7XX |
| default y |
| |
| config POWER_AVS_OMAP |
| bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" |
| depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM |
| select POWER_SUPPLY |
| help |
| Say Y to enable AVS(Adaptive Voltage Scaling) |
| support on OMAP containing the version 1 or |
| version 2 of the SmartReflex IP. |
| V1 is the 65nm version used in OMAP3430. |
| V2 is the update for the 45nm version of the IP used in OMAP3630 |
| and OMAP4430 |
| |
| Please note, that by default SmartReflex is only |
| initialized and not enabled. To enable the automatic voltage |
| compensation for vdd mpu and vdd core from user space, |
| user must write 1 to |
| /debug/smartreflex/sr_<X>/autocomp, |
| where X is mpu_iva or core for OMAP3. |
| Optionally autocompensation can be enabled in the kernel |
| by default during system init via the enable_on_init flag |
| which an be passed as platform data to the smartreflex driver. |
| |
| config POWER_AVS_OMAP_CLASS3 |
| bool "Class 3 mode of Smartreflex Implementation" |
| depends on POWER_AVS_OMAP && TWL4030_CORE |
| help |
| Say Y to enable Class 3 implementation of Smartreflex |
| |
| Class 3 implementation of Smartreflex employs continuous hardware |
| voltage calibration. |
| |
| config OMAP3_L2_AUX_SECURE_SAVE_RESTORE |
| bool "OMAP3 HS/EMU save and restore for L2 AUX control register" |
| depends on ARCH_OMAP3 && PM |
| help |
| Without this option, L2 Auxiliary control register contents are |
| lost during off-mode entry on HS/EMU devices. This feature |
| requires support from PPA / boot-loader in HS/EMU devices, which |
| currently does not exist by default. |
| |
| config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID |
| int "Service ID for the support routine to set L2 AUX control" |
| depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE |
| default 43 |
| help |
| PPA routine service ID for setting L2 auxiliary control register. |
| |
| comment "OMAP Core Type" |
| depends on ARCH_OMAP2 |
| |
| config SOC_OMAP2420 |
| bool "OMAP2420 support" |
| depends on ARCH_OMAP2 |
| default y |
| select OMAP_DM_SYSTIMER |
| select OMAP_DM_TIMER |
| select SOC_HAS_OMAP2_SDRC |
| |
| config SOC_OMAP2430 |
| bool "OMAP2430 support" |
| depends on ARCH_OMAP2 |
| default y |
| select SOC_HAS_OMAP2_SDRC |
| |
| config SOC_OMAP3430 |
| bool "OMAP3430 support" |
| depends on ARCH_OMAP3 |
| default y |
| select SOC_HAS_OMAP2_SDRC |
| |
| config SOC_TI81XX |
| bool "TI81XX support" |
| depends on ARCH_OMAP3 |
| default y |
| |
| comment "OMAP Legacy Platform Data Board Type" |
| depends on ARCH_OMAP2PLUS |
| |
| config MACH_OMAP_GENERIC |
| bool |
| |
| config MACH_OMAP2_TUSB6010 |
| bool |
| depends on ARCH_OMAP2 && SOC_OMAP2420 |
| default y if MACH_NOKIA_N8X0 |
| |
| config MACH_NOKIA_N810 |
| bool |
| |
| config MACH_NOKIA_N810_WIMAX |
| bool |
| |
| config MACH_NOKIA_N8X0 |
| bool "Nokia N800/N810" |
| depends on SOC_OMAP2420 |
| default y |
| select MACH_NOKIA_N810 |
| select MACH_NOKIA_N810_WIMAX |
| |
| config OMAP3_SDRC_AC_TIMING |
| bool "Enable SDRC AC timing register changes" |
| depends on ARCH_OMAP3 |
| help |
| If you know that none of your system initiators will attempt to |
| access SDRAM during CORE DVFS, select Y here. This should boost |
| SDRAM performance at lower CORE OPPs. There are relatively few |
| users who will wish to say yes at this point - almost everyone will |
| wish to say no. Selecting yes without understanding what is |
| going on could result in system crashes; |
| |
| endmenu |
| |
| endif |
| |
| config OMAP5_ERRATA_801819 |
| bool "Errata 801819: An eviction from L1 data cache might stall indefinitely" |
| depends on SOC_OMAP5 || SOC_DRA7XX |
| help |
| A livelock can occur in the L2 cache arbitration that might prevent |
| a snoop from completing. Under certain conditions this can cause the |
| system to deadlock. |
| |
| endmenu |
