| #!/bin/sh |
| # SPDX-License-Identifier: GPL-2.0 |
| # |
| # OVS kernel module self tests |
| |
| trap ovs_exit_sig EXIT TERM INT ERR |
| |
| # Kselftest framework requirement - SKIP code is 4. |
| ksft_skip=4 |
| |
| PAUSE_ON_FAIL=no |
| VERBOSE=0 |
| TRACING=0 |
| |
| tests=" |
| netlink_checks ovsnl: validate netlink attrs and settings |
| upcall_interfaces ovs: test the upcall interfaces" |
| |
| info() { |
| [ $VERBOSE = 0 ] || echo $* |
| } |
| |
| ovs_base=`pwd` |
| sbxs= |
| sbx_add () { |
| info "adding sandbox '$1'" |
| |
| sbxs="$sbxs $1" |
| |
| NO_BIN=0 |
| |
| # Create sandbox. |
| local d="$ovs_base"/$1 |
| if [ -e $d ]; then |
| info "removing $d" |
| rm -rf "$d" |
| fi |
| mkdir "$d" || return 1 |
| ovs_setenv $1 |
| } |
| |
| ovs_exit_sig() { |
| [ -e ${ovs_dir}/cleanup ] && . "$ovs_dir/cleanup" |
| } |
| |
| on_exit() { |
| echo "$1" > ${ovs_dir}/cleanup.tmp |
| cat ${ovs_dir}/cleanup >> ${ovs_dir}/cleanup.tmp |
| mv ${ovs_dir}/cleanup.tmp ${ovs_dir}/cleanup |
| } |
| |
| ovs_setenv() { |
| sandbox=$1 |
| |
| ovs_dir=$ovs_base${1:+/$1}; export ovs_dir |
| |
| test -e ${ovs_dir}/cleanup || : > ${ovs_dir}/cleanup |
| } |
| |
| ovs_sbx() { |
| if test "X$2" != X; then |
| (ovs_setenv $1; shift; "$@" >> ${ovs_dir}/debug.log) |
| else |
| ovs_setenv $1 |
| fi |
| } |
| |
| ovs_add_dp () { |
| info "Adding DP/Bridge IF: sbx:$1 dp:$2 {$3, $4, $5}" |
| sbxname="$1" |
| shift |
| ovs_sbx "$sbxname" python3 $ovs_base/ovs-dpctl.py add-dp $* |
| on_exit "ovs_sbx $sbxname python3 $ovs_base/ovs-dpctl.py del-dp $1;" |
| } |
| |
| ovs_add_if () { |
| info "Adding IF to DP: br:$2 if:$3" |
| if [ "$4" != "-u" ]; then |
| ovs_sbx "$1" python3 $ovs_base/ovs-dpctl.py add-if "$2" "$3" \ |
| || return 1 |
| else |
| python3 $ovs_base/ovs-dpctl.py add-if \ |
| -u "$2" "$3" >$ovs_dir/$3.out 2>$ovs_dir/$3.err & |
| pid=$! |
| on_exit "ovs_sbx $1 kill -TERM $pid 2>/dev/null" |
| fi |
| } |
| |
| ovs_del_if () { |
| info "Deleting IF from DP: br:$2 if:$3" |
| ovs_sbx "$1" python3 $ovs_base/ovs-dpctl.py del-if "$2" "$3" || return 1 |
| } |
| |
| ovs_netns_spawn_daemon() { |
| sbx=$1 |
| shift |
| netns=$1 |
| shift |
| info "spawning cmd: $*" |
| ip netns exec $netns $* >> $ovs_dir/stdout 2>> $ovs_dir/stderr & |
| pid=$! |
| ovs_sbx "$sbx" on_exit "kill -TERM $pid 2>/dev/null" |
| } |
| |
| ovs_add_netns_and_veths () { |
| info "Adding netns attached: sbx:$1 dp:$2 {$3, $4, $5}" |
| ovs_sbx "$1" ip netns add "$3" || return 1 |
| on_exit "ovs_sbx $1 ip netns del $3" |
| ovs_sbx "$1" ip link add "$4" type veth peer name "$5" || return 1 |
| on_exit "ovs_sbx $1 ip link del $4 >/dev/null 2>&1" |
| ovs_sbx "$1" ip link set "$4" up || return 1 |
| ovs_sbx "$1" ip link set "$5" netns "$3" || return 1 |
| ovs_sbx "$1" ip netns exec "$3" ip link set "$5" up || return 1 |
| |
| if [ "$6" != "" ]; then |
| ovs_sbx "$1" ip netns exec "$3" ip addr add "$6" dev "$5" \ |
| || return 1 |
| fi |
| |
| if [ "$7" != "-u" ]; then |
| ovs_add_if "$1" "$2" "$4" || return 1 |
| else |
| ovs_add_if "$1" "$2" "$4" -u || return 1 |
| fi |
| |
| [ $TRACING -eq 1 ] && ovs_netns_spawn_daemon "$1" "$ns" \ |
| tcpdump -i any -s 65535 |
| |
| return 0 |
| } |
| |
| usage() { |
| echo |
| echo "$0 [OPTIONS] [TEST]..." |
| echo "If no TEST argument is given, all tests will be run." |
| echo |
| echo "Options" |
| echo " -t: capture traffic via tcpdump" |
| echo " -v: verbose" |
| echo " -p: pause on failure" |
| echo |
| echo "Available tests${tests}" |
| exit 1 |
| } |
| |
| # netlink_validation |
| # - Create a dp |
| # - check no warning with "old version" simulation |
| test_netlink_checks () { |
| sbx_add "test_netlink_checks" || return 1 |
| |
| info "setting up new DP" |
| ovs_add_dp "test_netlink_checks" nv0 || return 1 |
| # now try again |
| PRE_TEST=$(dmesg | grep -E "RIP: [0-9a-fA-Fx]+:ovs_dp_cmd_new\+") |
| ovs_add_dp "test_netlink_checks" nv0 -V 0 || return 1 |
| POST_TEST=$(dmesg | grep -E "RIP: [0-9a-fA-Fx]+:ovs_dp_cmd_new\+") |
| if [ "$PRE_TEST" != "$POST_TEST" ]; then |
| info "failed - gen warning" |
| return 1 |
| fi |
| |
| ovs_add_netns_and_veths "test_netlink_checks" nv0 left left0 l0 || \ |
| return 1 |
| ovs_add_netns_and_veths "test_netlink_checks" nv0 right right0 r0 || \ |
| return 1 |
| [ $(python3 $ovs_base/ovs-dpctl.py show nv0 | grep port | \ |
| wc -l) == 3 ] || \ |
| return 1 |
| ovs_del_if "test_netlink_checks" nv0 right0 || return 1 |
| [ $(python3 $ovs_base/ovs-dpctl.py show nv0 | grep port | \ |
| wc -l) == 2 ] || \ |
| return 1 |
| |
| return 0 |
| } |
| |
| test_upcall_interfaces() { |
| sbx_add "test_upcall_interfaces" || return 1 |
| |
| info "setting up new DP" |
| ovs_add_dp "test_upcall_interfaces" ui0 -V 2:1 || return 1 |
| |
| ovs_add_netns_and_veths "test_upcall_interfaces" ui0 upc left0 l0 \ |
| 172.31.110.1/24 -u || return 1 |
| |
| sleep 1 |
| info "sending arping" |
| ip netns exec upc arping -I l0 172.31.110.20 -c 1 \ |
| >$ovs_dir/arping.stdout 2>$ovs_dir/arping.stderr |
| |
| grep -E "MISS upcall\[0/yes\]: .*arp\(sip=172.31.110.1,tip=172.31.110.20,op=1,sha=" $ovs_dir/left0.out >/dev/null 2>&1 || return 1 |
| return 0 |
| } |
| |
| run_test() { |
| ( |
| tname="$1" |
| tdesc="$2" |
| |
| if ! lsmod | grep openvswitch >/dev/null 2>&1; then |
| stdbuf -o0 printf "TEST: %-60s [NOMOD]\n" "${tdesc}" |
| return $ksft_skip |
| fi |
| |
| if python3 ovs-dpctl.py -h 2>&1 | \ |
| grep -E "Need to (install|upgrade) the python" >/dev/null 2>&1; then |
| stdbuf -o0 printf "TEST: %-60s [PYLIB]\n" "${tdesc}" |
| return $ksft_skip |
| fi |
| printf "TEST: %-60s [START]\n" "${tname}" |
| |
| unset IFS |
| |
| eval test_${tname} |
| ret=$? |
| |
| if [ $ret -eq 0 ]; then |
| printf "TEST: %-60s [ OK ]\n" "${tdesc}" |
| ovs_exit_sig |
| rm -rf "$ovs_dir" |
| elif [ $ret -eq 1 ]; then |
| printf "TEST: %-60s [FAIL]\n" "${tdesc}" |
| if [ "${PAUSE_ON_FAIL}" = "yes" ]; then |
| echo |
| echo "Pausing. Logs in $ovs_dir/. Hit enter to continue" |
| read a |
| fi |
| ovs_exit_sig |
| [ "${PAUSE_ON_FAIL}" = "yes" ] || rm -rf "$ovs_dir" |
| exit 1 |
| elif [ $ret -eq $ksft_skip ]; then |
| printf "TEST: %-60s [SKIP]\n" "${tdesc}" |
| elif [ $ret -eq 2 ]; then |
| rm -rf test_${tname} |
| run_test "$1" "$2" |
| fi |
| |
| return $ret |
| ) |
| ret=$? |
| case $ret in |
| 0) |
| [ $all_skipped = true ] && [ $exitcode=$ksft_skip ] && exitcode=0 |
| all_skipped=false |
| ;; |
| $ksft_skip) |
| [ $all_skipped = true ] && exitcode=$ksft_skip |
| ;; |
| *) |
| all_skipped=false |
| exitcode=1 |
| ;; |
| esac |
| |
| return $ret |
| } |
| |
| |
| exitcode=0 |
| desc=0 |
| all_skipped=true |
| |
| while getopts :pvt o |
| do |
| case $o in |
| p) PAUSE_ON_FAIL=yes;; |
| v) VERBOSE=1;; |
| t) if which tcpdump > /dev/null 2>&1; then |
| TRACING=1 |
| else |
| echo "=== tcpdump not available, tracing disabled" |
| fi |
| ;; |
| *) usage;; |
| esac |
| done |
| shift $(($OPTIND-1)) |
| |
| IFS=" |
| " |
| |
| for arg do |
| # Check first that all requested tests are available before running any |
| command -v > /dev/null "test_${arg}" || { echo "=== Test ${arg} not found"; usage; } |
| done |
| |
| name="" |
| desc="" |
| for t in ${tests}; do |
| [ "${name}" = "" ] && name="${t}" && continue |
| [ "${desc}" = "" ] && desc="${t}" |
| |
| run_this=1 |
| for arg do |
| [ "${arg}" != "${arg#--*}" ] && continue |
| [ "${arg}" = "${name}" ] && run_this=1 && break |
| run_this=0 |
| done |
| if [ $run_this -eq 1 ]; then |
| run_test "${name}" "${desc}" |
| fi |
| name="" |
| desc="" |
| done |
| |
| exit ${exitcode} |
