arch/powerpc/boot/dts/fsl/p1022si-post.dtsi - linux - Git at Google

 /*
  * P1022/P1013 Silicon/SoC Device Tree Source (post include)
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *       notice, this list of conditions and the following disclaimer in the
  *       documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *       names of its contributors may be used to endorse or promote products
  *       derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 &lbc {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	/*
 	 * The localbus on the P1022 is not a simple-bus because of the eLBC
 	 * pin muxing when the DIU is enabled.
 	 */
 	compatible = "fsl,p1022-elbc", "fsl,elbc";
 	interrupts = <19 2 0 0>,
 		     <16 2 0 0>;
 };

 /* controller at 0x9000 */
 &pci0 {
 	compatible = "fsl,mpc8548-pcie";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0 255>;
 	clock-frequency = <33333333>;
 	interrupts = <16 2 0 0>;

 	pcie@0 {
 		reg = <0 0 0 0 0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
 			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
 			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
 			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
 			>;
 	};
 };

 /* controller at 0xa000 */
 &pci1 {
 	compatible = "fsl,mpc8548-pcie";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0 255>;
 	clock-frequency = <33333333>;
 	interrupts = <16 2 0 0>;

 	pcie@0 {
 		reg = <0 0 0 0 0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;

 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
 			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
 			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
 			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
 			>;
 	};
 };

 /* controller at 0xb000 */
 &pci2 {
 	compatible = "fsl,mpc8548-pcie";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0 255>;
 	clock-frequency = <33333333>;
 	interrupts = <16 2 0 0>;

 	pcie@0 {
 		reg = <0 0 0 0 0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		interrupts = <16 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;

 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
 			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
 			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
 			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
 			>;
 	};
 };

 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	device_type = "soc";
 	compatible = "fsl,p1022-immr", "simple-bus";
 	bus-frequency = <0>;		// Filled out by uboot.

 	ecm-law@0 {
 		compatible = "fsl,ecm-law";
 		reg = <0x0 0x1000>;
 		fsl,num-laws = <12>;
 	};

 	ecm@1000 {
 		compatible = "fsl,p1022-ecm", "fsl,ecm";
 		reg = <0x1000 0x1000>;
 		interrupts = <16 2 0 0>;
 	};

 	memory-controller@2000 {
 		compatible = "fsl,p1022-memory-controller";
 		reg = <0x2000 0x1000>;
 		interrupts = <16 2 0 0>;
 	};

 /include/ "pq3-i2c-0.dtsi"
 /include/ "pq3-i2c-1.dtsi"
 /include/ "pq3-duart-0.dtsi"
 /include/ "pq3-espi-0.dtsi"
 	spi@7000 {
 		fsl,espi-num-chipselects = <4>;
 	};

 /include/ "pq3-dma-1.dtsi"
 	dma@c300 {
 		dma00: dma-channel@0 {
 			compatible = "fsl,ssi-dma-channel";
 		};
 		dma01: dma-channel@80 {
 			compatible = "fsl,ssi-dma-channel";
 		};
 	};

 /include/ "pq3-gpio-0.dtsi"

 	display: display@10000 {
 		compatible = "fsl,diu", "fsl,p1022-diu";
 		reg = <0x10000 1000>;
 		interrupts = <64 2 0 0>;
 	};

 	ssi@15000 {
 		compatible = "fsl,mpc8610-ssi";
 		cell-index = <0>;
 		reg = <0x15000 0x100>;
 		interrupts = <75 2 0 0>;
 		fsl,playback-dma = <&dma00>;
 		fsl,capture-dma = <&dma01>;
 		fsl,fifo-depth = <15>;
 	};

 /include/ "pq3-sata2-0.dtsi"
 /include/ "pq3-sata2-1.dtsi"

 	L2: l2-cache-controller@20000 {
 		compatible = "fsl,p1022-l2-cache-controller";
 		reg = <0x20000 0x1000>;
 		cache-line-size = <32>;	// 32 bytes
 		cache-size = <0x40000>; // L2,256K
 		interrupts = <16 2 0 0>;
 	};

 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
 	usb@22000 {
 		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
 	};
 /include/ "pq3-usb2-dr-1.dtsi"
 	usb@23000 {
 		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
 	};

 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
 		compatible = "fsl,p1022-esdhc", "fsl,esdhc";
 		sdhci,auto-cmd12;
 	};

 /include/ "pq3-sec3.3-0.dtsi"
 /include/ "pq3-mpic.dtsi"
 /include/ "pq3-mpic-timer-B.dtsi"

 /include/ "pq3-etsec2-0.dtsi"
 	enet0: enet0_grp2: ethernet@b0000 {
 		fsl,wake-on-filer;
 	};

 /include/ "pq3-etsec2-1.dtsi"
 	enet1: enet1_grp2: ethernet@b1000 {
 		fsl,wake-on-filer;
 	};

 	global-utilities@e0000 {
 		compatible = "fsl,p1022-guts";
 		reg = <0xe0000 0x1000>;
 		fsl,has-rstcr;
 	};

 	power@e0070 {
 		compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
 		reg = <0xe0070 0x20>;
 	};

 };

 /include/ "pq3-etsec2-grp2-0.dtsi"
 /include/ "pq3-etsec2-grp2-1.dtsi"
	/*
	* P1022/P1013 Silicon/SoC Device Tree Source (post include)
	*
	* Copyright 2011 Freescale Semiconductor Inc.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	&lbc {
	#address-cells = <2>;
	#size-cells = <1>;
	/*
	* The localbus on the P1022 is not a simple-bus because of the eLBC
	* pin muxing when the DIU is enabled.
	*/
	compatible = "fsl,p1022-elbc", "fsl,elbc";
	interrupts = <19 2 0 0>,
	<16 2 0 0>;
	};

	/* controller at 0x9000 */
	&pci0 {
	compatible = "fsl,mpc8548-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 255>;
	clock-frequency = <33333333>;
	interrupts = <16 2 0 0>;

	pcie@0 {
	reg = <0 0 0 0 0>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	interrupts = <16 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
	0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
	0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
	0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
	>;
	};
	};

	/* controller at 0xa000 */
	&pci1 {
	compatible = "fsl,mpc8548-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 255>;
	clock-frequency = <33333333>;
	interrupts = <16 2 0 0>;

	pcie@0 {
	reg = <0 0 0 0 0>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	interrupts = <16 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;

	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
	0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
	0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
	0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
	>;
	};
	};

	/* controller at 0xb000 */
	&pci2 {
	compatible = "fsl,mpc8548-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 255>;
	clock-frequency = <33333333>;
	interrupts = <16 2 0 0>;

	pcie@0 {
	reg = <0 0 0 0 0>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	interrupts = <16 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;

	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
	0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
	0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
	0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
	>;
	};
	};

	&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "soc";
	compatible = "fsl,p1022-immr", "simple-bus";
	bus-frequency = <0>; // Filled out by uboot.

	ecm-law@0 {
	compatible = "fsl,ecm-law";
	reg = <0x0 0x1000>;
	fsl,num-laws = <12>;
	};

	ecm@1000 {
	compatible = "fsl,p1022-ecm", "fsl,ecm";
	reg = <0x1000 0x1000>;
	interrupts = <16 2 0 0>;
	};

	memory-controller@2000 {
	compatible = "fsl,p1022-memory-controller";
	reg = <0x2000 0x1000>;
	interrupts = <16 2 0 0>;
	};

	/include/ "pq3-i2c-0.dtsi"
	/include/ "pq3-i2c-1.dtsi"
	/include/ "pq3-duart-0.dtsi"
	/include/ "pq3-espi-0.dtsi"
	spi@7000 {
	fsl,espi-num-chipselects = <4>;
	};

	/include/ "pq3-dma-1.dtsi"
	dma@c300 {
	dma00: dma-channel@0 {
	compatible = "fsl,ssi-dma-channel";
	};
	dma01: dma-channel@80 {
	compatible = "fsl,ssi-dma-channel";
	};
	};

	/include/ "pq3-gpio-0.dtsi"

	display: display@10000 {
	compatible = "fsl,diu", "fsl,p1022-diu";
	reg = <0x10000 1000>;
	interrupts = <64 2 0 0>;
	};

	ssi@15000 {
	compatible = "fsl,mpc8610-ssi";
	cell-index = <0>;
	reg = <0x15000 0x100>;
	interrupts = <75 2 0 0>;
	fsl,playback-dma = <&dma00>;
	fsl,capture-dma = <&dma01>;
	fsl,fifo-depth = <15>;
	};

	/include/ "pq3-sata2-0.dtsi"
	/include/ "pq3-sata2-1.dtsi"

	L2: l2-cache-controller@20000 {
	compatible = "fsl,p1022-l2-cache-controller";
	reg = <0x20000 0x1000>;
	cache-line-size = <32>; // 32 bytes
	cache-size = <0x40000>; // L2,256K
	interrupts = <16 2 0 0>;
	};

	/include/ "pq3-dma-0.dtsi"
	/include/ "pq3-usb2-dr-0.dtsi"
	usb@22000 {
	compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
	};
	/include/ "pq3-usb2-dr-1.dtsi"
	usb@23000 {
	compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
	};

	/include/ "pq3-esdhc-0.dtsi"
	sdhc@2e000 {
	compatible = "fsl,p1022-esdhc", "fsl,esdhc";
	sdhci,auto-cmd12;
	};

	/include/ "pq3-sec3.3-0.dtsi"
	/include/ "pq3-mpic.dtsi"
	/include/ "pq3-mpic-timer-B.dtsi"

	/include/ "pq3-etsec2-0.dtsi"
	enet0: enet0_grp2: ethernet@b0000 {
	fsl,wake-on-filer;
	};

	/include/ "pq3-etsec2-1.dtsi"
	enet1: enet1_grp2: ethernet@b1000 {
	fsl,wake-on-filer;
	};

	global-utilities@e0000 {
	compatible = "fsl,p1022-guts";
	reg = <0xe0000 0x1000>;
	fsl,has-rstcr;
	};

	power@e0070 {
	compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
	reg = <0xe0070 0x20>;
	};

	};

	/include/ "pq3-etsec2-grp2-0.dtsi"
	/include/ "pq3-etsec2-grp2-1.dtsi"