|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | // Copyright (C) 2014 Broadcom Corporation | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/clk-provider.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/clkdev.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/delay.h> | 
|  |  | 
|  | #include "clk-iproc.h" | 
|  |  | 
|  | #define PLL_VCO_HIGH_SHIFT 19 | 
|  | #define PLL_VCO_LOW_SHIFT  30 | 
|  |  | 
|  | /* | 
|  | * PLL MACRO_SELECT modes 0 to 5 choose pre-calculated PLL output frequencies | 
|  | * from a look-up table. Mode 7 allows user to manipulate PLL clock dividers | 
|  | */ | 
|  | #define PLL_USER_MODE 7 | 
|  |  | 
|  | /* number of delay loops waiting for PLL to lock */ | 
|  | #define LOCK_DELAY 100 | 
|  |  | 
|  | /* number of VCO frequency bands */ | 
|  | #define NUM_FREQ_BANDS 8 | 
|  |  | 
|  | #define NUM_KP_BANDS 3 | 
|  | enum kp_band { | 
|  | KP_BAND_MID = 0, | 
|  | KP_BAND_HIGH, | 
|  | KP_BAND_HIGH_HIGH | 
|  | }; | 
|  |  | 
|  | static const unsigned int kp_table[NUM_KP_BANDS][NUM_FREQ_BANDS] = { | 
|  | { 5, 6, 6, 7, 7, 8, 9, 10 }, | 
|  | { 4, 4, 5, 5, 6, 7, 8, 9  }, | 
|  | { 4, 5, 5, 6, 7, 8, 9, 10 }, | 
|  | }; | 
|  |  | 
|  | static const unsigned long ref_freq_table[NUM_FREQ_BANDS][2] = { | 
|  | { 10000000,  12500000  }, | 
|  | { 12500000,  15000000  }, | 
|  | { 15000000,  20000000  }, | 
|  | { 20000000,  25000000  }, | 
|  | { 25000000,  50000000  }, | 
|  | { 50000000,  75000000  }, | 
|  | { 75000000,  100000000 }, | 
|  | { 100000000, 125000000 }, | 
|  | }; | 
|  |  | 
|  | enum vco_freq_range { | 
|  | VCO_LOW       = 700000000U, | 
|  | VCO_MID       = 1200000000U, | 
|  | VCO_HIGH      = 2200000000U, | 
|  | VCO_HIGH_HIGH = 3100000000U, | 
|  | VCO_MAX       = 4000000000U, | 
|  | }; | 
|  |  | 
|  | struct iproc_pll { | 
|  | void __iomem *status_base; | 
|  | void __iomem *control_base; | 
|  | void __iomem *pwr_base; | 
|  | void __iomem *asiu_base; | 
|  |  | 
|  | const struct iproc_pll_ctrl *ctrl; | 
|  | const struct iproc_pll_vco_param *vco_param; | 
|  | unsigned int num_vco_entries; | 
|  | }; | 
|  |  | 
|  | struct iproc_clk { | 
|  | struct clk_hw hw; | 
|  | struct iproc_pll *pll; | 
|  | const struct iproc_clk_ctrl *ctrl; | 
|  | }; | 
|  |  | 
|  | #define to_iproc_clk(hw) container_of(hw, struct iproc_clk, hw) | 
|  |  | 
|  | static int pll_calc_param(unsigned long target_rate, | 
|  | unsigned long parent_rate, | 
|  | struct iproc_pll_vco_param *vco_out) | 
|  | { | 
|  | u64 ndiv_int, ndiv_frac, residual; | 
|  |  | 
|  | ndiv_int = target_rate / parent_rate; | 
|  |  | 
|  | if (!ndiv_int || (ndiv_int > 255)) | 
|  | return -EINVAL; | 
|  |  | 
|  | residual = target_rate - (ndiv_int * parent_rate); | 
|  | residual <<= 20; | 
|  |  | 
|  | /* | 
|  | * Add half of the divisor so the result will be rounded to closest | 
|  | * instead of rounded down. | 
|  | */ | 
|  | residual += (parent_rate / 2); | 
|  | ndiv_frac = div64_u64((u64)residual, (u64)parent_rate); | 
|  |  | 
|  | vco_out->ndiv_int = ndiv_int; | 
|  | vco_out->ndiv_frac = ndiv_frac; | 
|  | vco_out->pdiv = 1; | 
|  |  | 
|  | vco_out->rate = vco_out->ndiv_int * parent_rate; | 
|  | residual = (u64)vco_out->ndiv_frac * (u64)parent_rate; | 
|  | residual >>= 20; | 
|  | vco_out->rate += residual; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Based on the target frequency, find a match from the VCO frequency parameter | 
|  | * table and return its index | 
|  | */ | 
|  | static int pll_get_rate_index(struct iproc_pll *pll, unsigned int target_rate) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < pll->num_vco_entries; i++) | 
|  | if (target_rate == pll->vco_param[i].rate) | 
|  | break; | 
|  |  | 
|  | if (i >= pll->num_vco_entries) | 
|  | return -EINVAL; | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static int get_kp(unsigned long ref_freq, enum kp_band kp_index) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (ref_freq < ref_freq_table[0][0]) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (i = 0; i < NUM_FREQ_BANDS; i++) { | 
|  | if (ref_freq >= ref_freq_table[i][0] && | 
|  | ref_freq < ref_freq_table[i][1]) | 
|  | return kp_table[kp_index][i]; | 
|  | } | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int pll_wait_for_lock(struct iproc_pll *pll) | 
|  | { | 
|  | int i; | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  |  | 
|  | for (i = 0; i < LOCK_DELAY; i++) { | 
|  | u32 val = readl(pll->status_base + ctrl->status.offset); | 
|  |  | 
|  | if (val & (1 << ctrl->status.shift)) | 
|  | return 0; | 
|  | udelay(10); | 
|  | } | 
|  |  | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | static void iproc_pll_write(const struct iproc_pll *pll, void __iomem *base, | 
|  | const u32 offset, u32 val) | 
|  | { | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  |  | 
|  | writel(val, base + offset); | 
|  |  | 
|  | if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK && | 
|  | (base == pll->status_base || base == pll->control_base))) | 
|  | val = readl(base + offset); | 
|  | } | 
|  |  | 
|  | static void __pll_disable(struct iproc_pll *pll) | 
|  | { | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  | u32 val; | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_PLL_ASIU) { | 
|  | val = readl(pll->asiu_base + ctrl->asiu.offset); | 
|  | val &= ~(1 << ctrl->asiu.en_shift); | 
|  | iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val); | 
|  | } | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) { | 
|  | val = readl(pll->control_base + ctrl->aon.offset); | 
|  | val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift; | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val); | 
|  | } | 
|  |  | 
|  | if (pll->pwr_base) { | 
|  | /* latch input value so core power can be shut down */ | 
|  | val = readl(pll->pwr_base + ctrl->aon.offset); | 
|  | val |= 1 << ctrl->aon.iso_shift; | 
|  | iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val); | 
|  |  | 
|  | /* power down the core */ | 
|  | val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift); | 
|  | iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __pll_enable(struct iproc_pll *pll) | 
|  | { | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  | u32 val; | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) { | 
|  | val = readl(pll->control_base + ctrl->aon.offset); | 
|  | val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift); | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val); | 
|  | } | 
|  |  | 
|  | if (pll->pwr_base) { | 
|  | /* power up the PLL and make sure it's not latched */ | 
|  | val = readl(pll->pwr_base + ctrl->aon.offset); | 
|  | val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift; | 
|  | val &= ~(1 << ctrl->aon.iso_shift); | 
|  | iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val); | 
|  | } | 
|  |  | 
|  | /* certain PLLs also need to be ungated from the ASIU top level */ | 
|  | if (ctrl->flags & IPROC_CLK_PLL_ASIU) { | 
|  | val = readl(pll->asiu_base + ctrl->asiu.offset); | 
|  | val |= (1 << ctrl->asiu.en_shift); | 
|  | iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __pll_put_in_reset(struct iproc_pll *pll) | 
|  | { | 
|  | u32 val; | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  | const struct iproc_pll_reset_ctrl *reset = &ctrl->reset; | 
|  |  | 
|  | val = readl(pll->control_base + reset->offset); | 
|  | if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW) | 
|  | val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift); | 
|  | else | 
|  | val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift)); | 
|  | iproc_pll_write(pll, pll->control_base, reset->offset, val); | 
|  | } | 
|  |  | 
|  | static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp, | 
|  | unsigned int ka, unsigned int ki) | 
|  | { | 
|  | u32 val; | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  | const struct iproc_pll_reset_ctrl *reset = &ctrl->reset; | 
|  | const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter; | 
|  |  | 
|  | val = readl(pll->control_base + dig_filter->offset); | 
|  | val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift | | 
|  | bit_mask(dig_filter->kp_width) << dig_filter->kp_shift | | 
|  | bit_mask(dig_filter->ka_width) << dig_filter->ka_shift); | 
|  | val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift | | 
|  | ka << dig_filter->ka_shift; | 
|  | iproc_pll_write(pll, pll->control_base, dig_filter->offset, val); | 
|  |  | 
|  | val = readl(pll->control_base + reset->offset); | 
|  | if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW) | 
|  | val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift)); | 
|  | else | 
|  | val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift); | 
|  | iproc_pll_write(pll, pll->control_base, reset->offset, val); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Determines if the change to be applied to the PLL is minor (just an update | 
|  | * or the fractional divider). If so, then we can avoid going through a | 
|  | * disruptive reset and lock sequence. | 
|  | */ | 
|  | static bool pll_fractional_change_only(struct iproc_pll *pll, | 
|  | struct iproc_pll_vco_param *vco) | 
|  | { | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  | u32 val; | 
|  | u32 ndiv_int; | 
|  | unsigned int pdiv; | 
|  |  | 
|  | /* PLL needs to be locked */ | 
|  | val = readl(pll->status_base + ctrl->status.offset); | 
|  | if ((val & (1 << ctrl->status.shift)) == 0) | 
|  | return false; | 
|  |  | 
|  | val = readl(pll->control_base + ctrl->ndiv_int.offset); | 
|  | ndiv_int = (val >> ctrl->ndiv_int.shift) & | 
|  | bit_mask(ctrl->ndiv_int.width); | 
|  |  | 
|  | if (ndiv_int != vco->ndiv_int) | 
|  | return false; | 
|  |  | 
|  | val = readl(pll->control_base + ctrl->pdiv.offset); | 
|  | pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width); | 
|  |  | 
|  | if (pdiv != vco->pdiv) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int pll_set_rate(struct iproc_clk *clk, struct iproc_pll_vco_param *vco, | 
|  | unsigned long parent_rate) | 
|  | { | 
|  | struct iproc_pll *pll = clk->pll; | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  | int ka = 0, ki, kp, ret; | 
|  | unsigned long rate = vco->rate; | 
|  | u32 val; | 
|  | enum kp_band kp_index; | 
|  | unsigned long ref_freq; | 
|  | const char *clk_name = clk_hw_get_name(&clk->hw); | 
|  |  | 
|  | /* | 
|  | * reference frequency = parent frequency / PDIV | 
|  | * If PDIV = 0, then it becomes a multiplier (x2) | 
|  | */ | 
|  | if (vco->pdiv == 0) | 
|  | ref_freq = parent_rate * 2; | 
|  | else | 
|  | ref_freq = parent_rate / vco->pdiv; | 
|  |  | 
|  | /* determine Ki and Kp index based on target VCO frequency */ | 
|  | if (rate >= VCO_LOW && rate < VCO_HIGH) { | 
|  | ki = 4; | 
|  | kp_index = KP_BAND_MID; | 
|  | } else if (rate >= VCO_HIGH && rate < VCO_HIGH_HIGH) { | 
|  | ki = 3; | 
|  | kp_index = KP_BAND_HIGH; | 
|  | } else if (rate >= VCO_HIGH_HIGH && rate < VCO_MAX) { | 
|  | ki = 3; | 
|  | kp_index = KP_BAND_HIGH_HIGH; | 
|  | } else { | 
|  | pr_err("%s: pll: %s has invalid rate: %lu\n", __func__, | 
|  | clk_name, rate); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | kp = get_kp(ref_freq, kp_index); | 
|  | if (kp < 0) { | 
|  | pr_err("%s: pll: %s has invalid kp\n", __func__, clk_name); | 
|  | return kp; | 
|  | } | 
|  |  | 
|  | ret = __pll_enable(pll); | 
|  | if (ret) { | 
|  | pr_err("%s: pll: %s fails to enable\n", __func__, clk_name); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (pll_fractional_change_only(clk->pll, vco)) { | 
|  | /* program fractional part of NDIV */ | 
|  | if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) { | 
|  | val = readl(pll->control_base + ctrl->ndiv_frac.offset); | 
|  | val &= ~(bit_mask(ctrl->ndiv_frac.width) << | 
|  | ctrl->ndiv_frac.shift); | 
|  | val |= vco->ndiv_frac << ctrl->ndiv_frac.shift; | 
|  | iproc_pll_write(pll, pll->control_base, | 
|  | ctrl->ndiv_frac.offset, val); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* put PLL in reset */ | 
|  | __pll_put_in_reset(pll); | 
|  |  | 
|  | /* set PLL in user mode before modifying PLL controls */ | 
|  | if (ctrl->flags & IPROC_CLK_PLL_USER_MODE_ON) { | 
|  | val = readl(pll->control_base + ctrl->macro_mode.offset); | 
|  | val &= ~(bit_mask(ctrl->macro_mode.width) << | 
|  | ctrl->macro_mode.shift); | 
|  | val |= PLL_USER_MODE << ctrl->macro_mode.shift; | 
|  | iproc_pll_write(pll, pll->control_base, | 
|  | ctrl->macro_mode.offset, val); | 
|  | } | 
|  |  | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0); | 
|  |  | 
|  | val = readl(pll->control_base + ctrl->vco_ctrl.l_offset); | 
|  |  | 
|  | if (rate >= VCO_LOW && rate < VCO_MID) | 
|  | val |= (1 << PLL_VCO_LOW_SHIFT); | 
|  |  | 
|  | if (rate < VCO_HIGH) | 
|  | val &= ~(1 << PLL_VCO_HIGH_SHIFT); | 
|  | else | 
|  | val |= (1 << PLL_VCO_HIGH_SHIFT); | 
|  |  | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val); | 
|  |  | 
|  | /* program integer part of NDIV */ | 
|  | val = readl(pll->control_base + ctrl->ndiv_int.offset); | 
|  | val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift); | 
|  | val |= vco->ndiv_int << ctrl->ndiv_int.shift; | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val); | 
|  |  | 
|  | /* program fractional part of NDIV */ | 
|  | if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) { | 
|  | val = readl(pll->control_base + ctrl->ndiv_frac.offset); | 
|  | val &= ~(bit_mask(ctrl->ndiv_frac.width) << | 
|  | ctrl->ndiv_frac.shift); | 
|  | val |= vco->ndiv_frac << ctrl->ndiv_frac.shift; | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset, | 
|  | val); | 
|  | } | 
|  |  | 
|  | /* program PDIV */ | 
|  | val = readl(pll->control_base + ctrl->pdiv.offset); | 
|  | val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift); | 
|  | val |= vco->pdiv << ctrl->pdiv.shift; | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val); | 
|  |  | 
|  | __pll_bring_out_reset(pll, kp, ka, ki); | 
|  |  | 
|  | ret = pll_wait_for_lock(pll); | 
|  | if (ret < 0) { | 
|  | pr_err("%s: pll: %s failed to lock\n", __func__, clk_name); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iproc_pll_enable(struct clk_hw *hw) | 
|  | { | 
|  | struct iproc_clk *clk = to_iproc_clk(hw); | 
|  | struct iproc_pll *pll = clk->pll; | 
|  |  | 
|  | return __pll_enable(pll); | 
|  | } | 
|  |  | 
|  | static void iproc_pll_disable(struct clk_hw *hw) | 
|  | { | 
|  | struct iproc_clk *clk = to_iproc_clk(hw); | 
|  | struct iproc_pll *pll = clk->pll; | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_AON) | 
|  | return; | 
|  |  | 
|  | __pll_disable(pll); | 
|  | } | 
|  |  | 
|  | static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw, | 
|  | unsigned long parent_rate) | 
|  | { | 
|  | struct iproc_clk *clk = to_iproc_clk(hw); | 
|  | struct iproc_pll *pll = clk->pll; | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  | u32 val; | 
|  | u64 ndiv, ndiv_int, ndiv_frac; | 
|  | unsigned int pdiv; | 
|  | unsigned long rate; | 
|  |  | 
|  | if (parent_rate == 0) | 
|  | return 0; | 
|  |  | 
|  | /* PLL needs to be locked */ | 
|  | val = readl(pll->status_base + ctrl->status.offset); | 
|  | if ((val & (1 << ctrl->status.shift)) == 0) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * PLL output frequency = | 
|  | * | 
|  | * ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv) | 
|  | */ | 
|  | val = readl(pll->control_base + ctrl->ndiv_int.offset); | 
|  | ndiv_int = (val >> ctrl->ndiv_int.shift) & | 
|  | bit_mask(ctrl->ndiv_int.width); | 
|  | ndiv = ndiv_int << 20; | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) { | 
|  | val = readl(pll->control_base + ctrl->ndiv_frac.offset); | 
|  | ndiv_frac = (val >> ctrl->ndiv_frac.shift) & | 
|  | bit_mask(ctrl->ndiv_frac.width); | 
|  | ndiv += ndiv_frac; | 
|  | } | 
|  |  | 
|  | val = readl(pll->control_base + ctrl->pdiv.offset); | 
|  | pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width); | 
|  |  | 
|  | rate = (ndiv * parent_rate) >> 20; | 
|  |  | 
|  | if (pdiv == 0) | 
|  | rate *= 2; | 
|  | else | 
|  | rate /= pdiv; | 
|  |  | 
|  | return rate; | 
|  | } | 
|  |  | 
|  | static int iproc_pll_determine_rate(struct clk_hw *hw, | 
|  | struct clk_rate_request *req) | 
|  | { | 
|  | unsigned int  i; | 
|  | struct iproc_clk *clk = to_iproc_clk(hw); | 
|  | struct iproc_pll *pll = clk->pll; | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  | unsigned long  diff, best_diff; | 
|  | unsigned int  best_idx = 0; | 
|  | int ret; | 
|  |  | 
|  | if (req->rate == 0 || req->best_parent_rate == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_PLL_CALC_PARAM) { | 
|  | struct iproc_pll_vco_param vco_param; | 
|  |  | 
|  | ret = pll_calc_param(req->rate, req->best_parent_rate, | 
|  | &vco_param); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | req->rate = vco_param.rate; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (!pll->vco_param) | 
|  | return -EINVAL; | 
|  |  | 
|  | best_diff = ULONG_MAX; | 
|  | for (i = 0; i < pll->num_vco_entries; i++) { | 
|  | diff = abs(req->rate - pll->vco_param[i].rate); | 
|  | if (diff <= best_diff) { | 
|  | best_diff = diff; | 
|  | best_idx = i; | 
|  | } | 
|  | /* break now if perfect match */ | 
|  | if (diff == 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | req->rate = pll->vco_param[best_idx].rate; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iproc_pll_set_rate(struct clk_hw *hw, unsigned long rate, | 
|  | unsigned long parent_rate) | 
|  | { | 
|  | struct iproc_clk *clk = to_iproc_clk(hw); | 
|  | struct iproc_pll *pll = clk->pll; | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  | struct iproc_pll_vco_param vco_param; | 
|  | int rate_index, ret; | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_PLL_CALC_PARAM) { | 
|  | ret = pll_calc_param(rate, parent_rate, &vco_param); | 
|  | if (ret) | 
|  | return ret; | 
|  | } else { | 
|  | rate_index = pll_get_rate_index(pll, rate); | 
|  | if (rate_index < 0) | 
|  | return rate_index; | 
|  |  | 
|  | vco_param = pll->vco_param[rate_index]; | 
|  | } | 
|  |  | 
|  | ret = pll_set_rate(clk, &vco_param, parent_rate); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct clk_ops iproc_pll_ops = { | 
|  | .enable = iproc_pll_enable, | 
|  | .disable = iproc_pll_disable, | 
|  | .recalc_rate = iproc_pll_recalc_rate, | 
|  | .determine_rate = iproc_pll_determine_rate, | 
|  | .set_rate = iproc_pll_set_rate, | 
|  | }; | 
|  |  | 
|  | static int iproc_clk_enable(struct clk_hw *hw) | 
|  | { | 
|  | struct iproc_clk *clk = to_iproc_clk(hw); | 
|  | const struct iproc_clk_ctrl *ctrl = clk->ctrl; | 
|  | struct iproc_pll *pll = clk->pll; | 
|  | u32 val; | 
|  |  | 
|  | /* channel enable is active low */ | 
|  | val = readl(pll->control_base + ctrl->enable.offset); | 
|  | val &= ~(1 << ctrl->enable.enable_shift); | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val); | 
|  |  | 
|  | /* also make sure channel is not held */ | 
|  | val = readl(pll->control_base + ctrl->enable.offset); | 
|  | val &= ~(1 << ctrl->enable.hold_shift); | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void iproc_clk_disable(struct clk_hw *hw) | 
|  | { | 
|  | struct iproc_clk *clk = to_iproc_clk(hw); | 
|  | const struct iproc_clk_ctrl *ctrl = clk->ctrl; | 
|  | struct iproc_pll *pll = clk->pll; | 
|  | u32 val; | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_AON) | 
|  | return; | 
|  |  | 
|  | val = readl(pll->control_base + ctrl->enable.offset); | 
|  | val |= 1 << ctrl->enable.enable_shift; | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val); | 
|  | } | 
|  |  | 
|  | static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw, | 
|  | unsigned long parent_rate) | 
|  | { | 
|  | struct iproc_clk *clk = to_iproc_clk(hw); | 
|  | const struct iproc_clk_ctrl *ctrl = clk->ctrl; | 
|  | struct iproc_pll *pll = clk->pll; | 
|  | u32 val; | 
|  | unsigned int mdiv; | 
|  | unsigned long rate; | 
|  |  | 
|  | if (parent_rate == 0) | 
|  | return 0; | 
|  |  | 
|  | val = readl(pll->control_base + ctrl->mdiv.offset); | 
|  | mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width); | 
|  | if (mdiv == 0) | 
|  | mdiv = 256; | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2) | 
|  | rate = parent_rate / (mdiv * 2); | 
|  | else | 
|  | rate = parent_rate / mdiv; | 
|  |  | 
|  | return rate; | 
|  | } | 
|  |  | 
|  | static int iproc_clk_determine_rate(struct clk_hw *hw, | 
|  | struct clk_rate_request *req) | 
|  | { | 
|  | unsigned int bestdiv; | 
|  |  | 
|  | if (req->rate == 0) | 
|  | return -EINVAL; | 
|  | if (req->rate == req->best_parent_rate) | 
|  | return 0; | 
|  |  | 
|  | bestdiv = DIV_ROUND_CLOSEST(req->best_parent_rate, req->rate); | 
|  | if (bestdiv < 2) | 
|  | req->rate = req->best_parent_rate; | 
|  |  | 
|  | if (bestdiv > 256) | 
|  | bestdiv = 256; | 
|  |  | 
|  | req->rate = req->best_parent_rate / bestdiv; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate, | 
|  | unsigned long parent_rate) | 
|  | { | 
|  | struct iproc_clk *clk = to_iproc_clk(hw); | 
|  | const struct iproc_clk_ctrl *ctrl = clk->ctrl; | 
|  | struct iproc_pll *pll = clk->pll; | 
|  | u32 val; | 
|  | unsigned int div; | 
|  |  | 
|  | if (rate == 0 || parent_rate == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | div = DIV_ROUND_CLOSEST(parent_rate, rate); | 
|  | if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2) | 
|  | div /=  2; | 
|  |  | 
|  | if (div > 256) | 
|  | return -EINVAL; | 
|  |  | 
|  | val = readl(pll->control_base + ctrl->mdiv.offset); | 
|  | if (div == 256) { | 
|  | val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift); | 
|  | } else { | 
|  | val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift); | 
|  | val |= div << ctrl->mdiv.shift; | 
|  | } | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct clk_ops iproc_clk_ops = { | 
|  | .enable = iproc_clk_enable, | 
|  | .disable = iproc_clk_disable, | 
|  | .recalc_rate = iproc_clk_recalc_rate, | 
|  | .determine_rate = iproc_clk_determine_rate, | 
|  | .set_rate = iproc_clk_set_rate, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Some PLLs require the PLL SW override bit to be set before changes can be | 
|  | * applied to the PLL | 
|  | */ | 
|  | static void iproc_pll_sw_cfg(struct iproc_pll *pll) | 
|  | { | 
|  | const struct iproc_pll_ctrl *ctrl = pll->ctrl; | 
|  |  | 
|  | if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) { | 
|  | u32 val; | 
|  |  | 
|  | val = readl(pll->control_base + ctrl->sw_ctrl.offset); | 
|  | val |= BIT(ctrl->sw_ctrl.shift); | 
|  | iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset, | 
|  | val); | 
|  | } | 
|  | } | 
|  |  | 
|  | void iproc_pll_clk_setup(struct device_node *node, | 
|  | const struct iproc_pll_ctrl *pll_ctrl, | 
|  | const struct iproc_pll_vco_param *vco, | 
|  | unsigned int num_vco_entries, | 
|  | const struct iproc_clk_ctrl *clk_ctrl, | 
|  | unsigned int num_clks) | 
|  | { | 
|  | int i, ret; | 
|  | struct iproc_pll *pll; | 
|  | struct iproc_clk *iclk; | 
|  | struct clk_init_data init; | 
|  | const char *parent_name; | 
|  | struct iproc_clk *iclk_array; | 
|  | struct clk_hw_onecell_data *clk_data; | 
|  | const char *clk_name; | 
|  |  | 
|  | if (WARN_ON(!pll_ctrl) || WARN_ON(!clk_ctrl)) | 
|  | return; | 
|  |  | 
|  | pll = kzalloc(sizeof(*pll), GFP_KERNEL); | 
|  | if (WARN_ON(!pll)) | 
|  | return; | 
|  |  | 
|  | clk_data = kzalloc(struct_size(clk_data, hws, num_clks), GFP_KERNEL); | 
|  | if (WARN_ON(!clk_data)) | 
|  | goto err_clk_data; | 
|  | clk_data->num = num_clks; | 
|  |  | 
|  | iclk_array = kcalloc(num_clks, sizeof(struct iproc_clk), GFP_KERNEL); | 
|  | if (WARN_ON(!iclk_array)) | 
|  | goto err_clks; | 
|  |  | 
|  | pll->control_base = of_iomap(node, 0); | 
|  | if (WARN_ON(!pll->control_base)) | 
|  | goto err_pll_iomap; | 
|  |  | 
|  | /* Some SoCs do not require the pwr_base, thus failing is not fatal */ | 
|  | pll->pwr_base = of_iomap(node, 1); | 
|  |  | 
|  | /* some PLLs require gating control at the top ASIU level */ | 
|  | if (pll_ctrl->flags & IPROC_CLK_PLL_ASIU) { | 
|  | pll->asiu_base = of_iomap(node, 2); | 
|  | if (WARN_ON(!pll->asiu_base)) | 
|  | goto err_asiu_iomap; | 
|  | } | 
|  |  | 
|  | if (pll_ctrl->flags & IPROC_CLK_PLL_SPLIT_STAT_CTRL) { | 
|  | /* Some SoCs have a split status/control.  If this does not | 
|  | * exist, assume they are unified. | 
|  | */ | 
|  | pll->status_base = of_iomap(node, 2); | 
|  | if (!pll->status_base) | 
|  | goto err_status_iomap; | 
|  | } else | 
|  | pll->status_base = pll->control_base; | 
|  |  | 
|  | /* initialize and register the PLL itself */ | 
|  | pll->ctrl = pll_ctrl; | 
|  |  | 
|  | iclk = &iclk_array[0]; | 
|  | iclk->pll = pll; | 
|  |  | 
|  | ret = of_property_read_string_index(node, "clock-output-names", | 
|  | 0, &clk_name); | 
|  | if (WARN_ON(ret)) | 
|  | goto err_pll_register; | 
|  |  | 
|  | init.name = clk_name; | 
|  | init.ops = &iproc_pll_ops; | 
|  | init.flags = 0; | 
|  | parent_name = of_clk_get_parent_name(node, 0); | 
|  | init.parent_names = (parent_name ? &parent_name : NULL); | 
|  | init.num_parents = (parent_name ? 1 : 0); | 
|  | iclk->hw.init = &init; | 
|  |  | 
|  | if (vco) { | 
|  | pll->num_vco_entries = num_vco_entries; | 
|  | pll->vco_param = vco; | 
|  | } | 
|  |  | 
|  | iproc_pll_sw_cfg(pll); | 
|  |  | 
|  | ret = clk_hw_register(NULL, &iclk->hw); | 
|  | if (WARN_ON(ret)) | 
|  | goto err_pll_register; | 
|  |  | 
|  | clk_data->hws[0] = &iclk->hw; | 
|  | parent_name = clk_name; | 
|  |  | 
|  | /* now initialize and register all leaf clocks */ | 
|  | for (i = 1; i < num_clks; i++) { | 
|  | memset(&init, 0, sizeof(init)); | 
|  |  | 
|  | ret = of_property_read_string_index(node, "clock-output-names", | 
|  | i, &clk_name); | 
|  | if (WARN_ON(ret)) | 
|  | goto err_clk_register; | 
|  |  | 
|  | iclk = &iclk_array[i]; | 
|  | iclk->pll = pll; | 
|  | iclk->ctrl = &clk_ctrl[i]; | 
|  |  | 
|  | init.name = clk_name; | 
|  | init.ops = &iproc_clk_ops; | 
|  | init.flags = 0; | 
|  | init.parent_names = (parent_name ? &parent_name : NULL); | 
|  | init.num_parents = (parent_name ? 1 : 0); | 
|  | iclk->hw.init = &init; | 
|  |  | 
|  | ret = clk_hw_register(NULL, &iclk->hw); | 
|  | if (WARN_ON(ret)) | 
|  | goto err_clk_register; | 
|  |  | 
|  | clk_data->hws[i] = &iclk->hw; | 
|  | } | 
|  |  | 
|  | ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); | 
|  | if (WARN_ON(ret)) | 
|  | goto err_clk_register; | 
|  |  | 
|  | return; | 
|  |  | 
|  | err_clk_register: | 
|  | while (--i >= 0) | 
|  | clk_hw_unregister(clk_data->hws[i]); | 
|  |  | 
|  | err_pll_register: | 
|  | if (pll->status_base != pll->control_base) | 
|  | iounmap(pll->status_base); | 
|  |  | 
|  | err_status_iomap: | 
|  | if (pll->asiu_base) | 
|  | iounmap(pll->asiu_base); | 
|  |  | 
|  | err_asiu_iomap: | 
|  | if (pll->pwr_base) | 
|  | iounmap(pll->pwr_base); | 
|  |  | 
|  | iounmap(pll->control_base); | 
|  |  | 
|  | err_pll_iomap: | 
|  | kfree(iclk_array); | 
|  |  | 
|  | err_clks: | 
|  | kfree(clk_data); | 
|  |  | 
|  | err_clk_data: | 
|  | kfree(pll); | 
|  | } |