|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * | 
|  | *  Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE | 
|  | *  Copyright (C) 2010 John Crispin <john@phrozen.org> | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/mtd/mtd.h> | 
|  | #include <linux/mtd/map.h> | 
|  | #include <linux/mtd/partitions.h> | 
|  | #include <linux/mtd/cfi.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/mtd/physmap.h> | 
|  | #include <linux/of.h> | 
|  |  | 
|  | #include <lantiq_soc.h> | 
|  |  | 
|  | /* | 
|  | * The NOR flash is connected to the same external bus unit (EBU) as PCI. | 
|  | * To make PCI work we need to enable the endianness swapping for the address | 
|  | * written to the EBU. This endianness swapping works for PCI correctly but | 
|  | * fails for attached NOR devices. To workaround this we need to use a complex | 
|  | * map. The workaround involves swapping all addresses whilst probing the chip. | 
|  | * Once probing is complete we stop swapping the addresses but swizzle the | 
|  | * unlock addresses to ensure that access to the NOR device works correctly. | 
|  | */ | 
|  |  | 
|  | enum { | 
|  | LTQ_NOR_PROBING, | 
|  | LTQ_NOR_NORMAL | 
|  | }; | 
|  |  | 
|  | struct ltq_mtd { | 
|  | struct resource *res; | 
|  | struct mtd_info *mtd; | 
|  | struct map_info *map; | 
|  | }; | 
|  |  | 
|  | static const char ltq_map_name[] = "ltq_nor"; | 
|  |  | 
|  | static map_word | 
|  | ltq_read16(struct map_info *map, unsigned long adr) | 
|  | { | 
|  | unsigned long flags; | 
|  | map_word temp; | 
|  |  | 
|  | if (map->map_priv_1 == LTQ_NOR_PROBING) | 
|  | adr ^= 2; | 
|  | spin_lock_irqsave(&ebu_lock, flags); | 
|  | temp.x[0] = *(u16 *)(map->virt + adr); | 
|  | spin_unlock_irqrestore(&ebu_lock, flags); | 
|  | return temp; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ltq_write16(struct map_info *map, map_word d, unsigned long adr) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | if (map->map_priv_1 == LTQ_NOR_PROBING) | 
|  | adr ^= 2; | 
|  | spin_lock_irqsave(&ebu_lock, flags); | 
|  | *(u16 *)(map->virt + adr) = d.x[0]; | 
|  | spin_unlock_irqrestore(&ebu_lock, flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The following 2 functions copy data between iomem and a cached memory | 
|  | * section. As memcpy() makes use of pre-fetching we cannot use it here. | 
|  | * The normal alternative of using memcpy_{to,from}io also makes use of | 
|  | * memcpy() on MIPS so it is not applicable either. We are therefore stuck | 
|  | * with having to use our own loop. | 
|  | */ | 
|  | static void | 
|  | ltq_copy_from(struct map_info *map, void *to, | 
|  | unsigned long from, ssize_t len) | 
|  | { | 
|  | unsigned char *f = (unsigned char *)map->virt + from; | 
|  | unsigned char *t = (unsigned char *)to; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ebu_lock, flags); | 
|  | while (len--) | 
|  | *t++ = *f++; | 
|  | spin_unlock_irqrestore(&ebu_lock, flags); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ltq_copy_to(struct map_info *map, unsigned long to, | 
|  | const void *from, ssize_t len) | 
|  | { | 
|  | unsigned char *f = (unsigned char *)from; | 
|  | unsigned char *t = (unsigned char *)map->virt + to; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&ebu_lock, flags); | 
|  | while (len--) | 
|  | *t++ = *f++; | 
|  | spin_unlock_irqrestore(&ebu_lock, flags); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ltq_mtd_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct ltq_mtd *ltq_mtd; | 
|  | struct cfi_private *cfi; | 
|  | int err; | 
|  |  | 
|  | ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL); | 
|  | if (!ltq_mtd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | platform_set_drvdata(pdev, ltq_mtd); | 
|  |  | 
|  | ltq_mtd->map->virt = devm_platform_get_and_ioremap_resource(pdev, 0, <q_mtd->res); | 
|  | if (IS_ERR(ltq_mtd->map->virt)) | 
|  | return PTR_ERR(ltq_mtd->map->virt); | 
|  |  | 
|  | ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info), | 
|  | GFP_KERNEL); | 
|  | if (!ltq_mtd->map) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ltq_mtd->map->phys = ltq_mtd->res->start; | 
|  | ltq_mtd->map->size = resource_size(ltq_mtd->res); | 
|  |  | 
|  | ltq_mtd->map->name = ltq_map_name; | 
|  | ltq_mtd->map->bankwidth = 2; | 
|  | ltq_mtd->map->read = ltq_read16; | 
|  | ltq_mtd->map->write = ltq_write16; | 
|  | ltq_mtd->map->copy_from = ltq_copy_from; | 
|  | ltq_mtd->map->copy_to = ltq_copy_to; | 
|  |  | 
|  | ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING; | 
|  | ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map); | 
|  | ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL; | 
|  |  | 
|  | if (!ltq_mtd->mtd) { | 
|  | dev_err(&pdev->dev, "probing failed\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | ltq_mtd->mtd->dev.parent = &pdev->dev; | 
|  | mtd_set_of_node(ltq_mtd->mtd, pdev->dev.of_node); | 
|  |  | 
|  | cfi = ltq_mtd->map->fldrv_priv; | 
|  | cfi->addr_unlock1 ^= 1; | 
|  | cfi->addr_unlock2 ^= 1; | 
|  |  | 
|  | err = mtd_device_register(ltq_mtd->mtd, NULL, 0); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "failed to add partitions\n"); | 
|  | goto err_destroy; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_destroy: | 
|  | map_destroy(ltq_mtd->mtd); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void ltq_mtd_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); | 
|  |  | 
|  | if (ltq_mtd && ltq_mtd->mtd) { | 
|  | mtd_device_unregister(ltq_mtd->mtd); | 
|  | map_destroy(ltq_mtd->mtd); | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct of_device_id ltq_mtd_match[] = { | 
|  | { .compatible = "lantiq,nor" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, ltq_mtd_match); | 
|  |  | 
|  | static struct platform_driver ltq_mtd_driver = { | 
|  | .probe = ltq_mtd_probe, | 
|  | .remove_new = ltq_mtd_remove, | 
|  | .driver = { | 
|  | .name = "ltq-nor", | 
|  | .of_match_table = ltq_mtd_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(ltq_mtd_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("John Crispin <john@phrozen.org>"); | 
|  | MODULE_DESCRIPTION("Lantiq SoC NOR"); |