| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Copyright (C) 2016 National Instruments Corp. | 
 |  */ | 
 |  | 
 | #include <linux/acpi.h> | 
 | #include <linux/bitops.h> | 
 | #include <linux/device.h> | 
 | #include <linux/io.h> | 
 | #include <linux/module.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/watchdog.h> | 
 |  | 
 | #define LOCK			0xA5 | 
 | #define UNLOCK			0x5A | 
 |  | 
 | #define WDT_CTRL_RESET_EN	BIT(7) | 
 | #define WDT_RELOAD_PORT_EN	BIT(7) | 
 |  | 
 | #define WDT_CTRL		1 | 
 | #define WDT_RELOAD_CTRL		2 | 
 | #define WDT_PRESET_PRESCALE	4 | 
 | #define WDT_REG_LOCK		5 | 
 | #define WDT_COUNT		6 | 
 | #define WDT_RELOAD_PORT		7 | 
 |  | 
 | #define WDT_MIN_TIMEOUT		1 | 
 | #define WDT_MAX_TIMEOUT		464 | 
 | #define WDT_DEFAULT_TIMEOUT	80 | 
 |  | 
 | #define WDT_MAX_COUNTER		15 | 
 |  | 
 | static unsigned int timeout; | 
 | module_param(timeout, uint, 0); | 
 | MODULE_PARM_DESC(timeout, | 
 | 		 "Watchdog timeout in seconds. (default=" | 
 | 		 __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")"); | 
 |  | 
 | static bool nowayout = WATCHDOG_NOWAYOUT; | 
 | module_param(nowayout, bool, 0); | 
 | MODULE_PARM_DESC(nowayout, | 
 | 		 "Watchdog cannot be stopped once started. (default=" | 
 | 		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | 
 |  | 
 | struct nic7018_wdt { | 
 | 	u16 io_base; | 
 | 	u32 period; | 
 | 	struct watchdog_device wdd; | 
 | }; | 
 |  | 
 | struct nic7018_config { | 
 | 	u32 period; | 
 | 	u8 divider; | 
 | }; | 
 |  | 
 | static const struct nic7018_config nic7018_configs[] = { | 
 | 	{  2, 4 }, | 
 | 	{ 32, 5 }, | 
 | }; | 
 |  | 
 | static inline u32 nic7018_timeout(u32 period, u8 counter) | 
 | { | 
 | 	return period * counter - period / 2; | 
 | } | 
 |  | 
 | static const struct nic7018_config *nic7018_get_config(u32 timeout, | 
 | 						       u8 *counter) | 
 | { | 
 | 	const struct nic7018_config *config; | 
 | 	u8 count; | 
 |  | 
 | 	if (timeout < 30 && timeout != 16) { | 
 | 		config = &nic7018_configs[0]; | 
 | 		count = timeout / 2 + 1; | 
 | 	} else { | 
 | 		config = &nic7018_configs[1]; | 
 | 		count = DIV_ROUND_UP(timeout + 16, 32); | 
 |  | 
 | 		if (count > WDT_MAX_COUNTER) | 
 | 			count = WDT_MAX_COUNTER; | 
 | 	} | 
 | 	*counter = count; | 
 | 	return config; | 
 | } | 
 |  | 
 | static int nic7018_set_timeout(struct watchdog_device *wdd, | 
 | 			       unsigned int timeout) | 
 | { | 
 | 	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); | 
 | 	const struct nic7018_config *config; | 
 | 	u8 counter; | 
 |  | 
 | 	config = nic7018_get_config(timeout, &counter); | 
 |  | 
 | 	outb(counter << 4 | config->divider, | 
 | 	     wdt->io_base + WDT_PRESET_PRESCALE); | 
 |  | 
 | 	wdd->timeout = nic7018_timeout(config->period, counter); | 
 | 	wdt->period = config->period; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int nic7018_start(struct watchdog_device *wdd) | 
 | { | 
 | 	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); | 
 | 	u8 control; | 
 |  | 
 | 	nic7018_set_timeout(wdd, wdd->timeout); | 
 |  | 
 | 	control = inb(wdt->io_base + WDT_RELOAD_CTRL); | 
 | 	outb(control | WDT_RELOAD_PORT_EN, wdt->io_base + WDT_RELOAD_CTRL); | 
 |  | 
 | 	outb(1, wdt->io_base + WDT_RELOAD_PORT); | 
 |  | 
 | 	control = inb(wdt->io_base + WDT_CTRL); | 
 | 	outb(control | WDT_CTRL_RESET_EN, wdt->io_base + WDT_CTRL); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int nic7018_stop(struct watchdog_device *wdd) | 
 | { | 
 | 	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); | 
 |  | 
 | 	outb(0, wdt->io_base + WDT_CTRL); | 
 | 	outb(0, wdt->io_base + WDT_RELOAD_CTRL); | 
 | 	outb(0xF0, wdt->io_base + WDT_PRESET_PRESCALE); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int nic7018_ping(struct watchdog_device *wdd) | 
 | { | 
 | 	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); | 
 |  | 
 | 	outb(1, wdt->io_base + WDT_RELOAD_PORT); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static unsigned int nic7018_get_timeleft(struct watchdog_device *wdd) | 
 | { | 
 | 	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd); | 
 | 	u8 count; | 
 |  | 
 | 	count = inb(wdt->io_base + WDT_COUNT) & 0xF; | 
 | 	if (!count) | 
 | 		return 0; | 
 |  | 
 | 	return nic7018_timeout(wdt->period, count); | 
 | } | 
 |  | 
 | static const struct watchdog_info nic7018_wdd_info = { | 
 | 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, | 
 | 	.identity = "NIC7018 Watchdog", | 
 | }; | 
 |  | 
 | static const struct watchdog_ops nic7018_wdd_ops = { | 
 | 	.owner = THIS_MODULE, | 
 | 	.start = nic7018_start, | 
 | 	.stop = nic7018_stop, | 
 | 	.ping = nic7018_ping, | 
 | 	.set_timeout = nic7018_set_timeout, | 
 | 	.get_timeleft = nic7018_get_timeleft, | 
 | }; | 
 |  | 
 | static int nic7018_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct watchdog_device *wdd; | 
 | 	struct nic7018_wdt *wdt; | 
 | 	struct resource *io_rc; | 
 | 	int ret; | 
 |  | 
 | 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); | 
 | 	if (!wdt) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	platform_set_drvdata(pdev, wdt); | 
 |  | 
 | 	io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0); | 
 | 	if (!io_rc) { | 
 | 		dev_err(dev, "missing IO resources\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!devm_request_region(dev, io_rc->start, resource_size(io_rc), | 
 | 				 KBUILD_MODNAME)) { | 
 | 		dev_err(dev, "failed to get IO region\n"); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	wdt->io_base = io_rc->start; | 
 | 	wdd = &wdt->wdd; | 
 | 	wdd->info = &nic7018_wdd_info; | 
 | 	wdd->ops = &nic7018_wdd_ops; | 
 | 	wdd->min_timeout = WDT_MIN_TIMEOUT; | 
 | 	wdd->max_timeout = WDT_MAX_TIMEOUT; | 
 | 	wdd->timeout = WDT_DEFAULT_TIMEOUT; | 
 | 	wdd->parent = dev; | 
 |  | 
 | 	watchdog_set_drvdata(wdd, wdt); | 
 | 	watchdog_set_nowayout(wdd, nowayout); | 
 | 	watchdog_init_timeout(wdd, timeout, dev); | 
 |  | 
 | 	/* Unlock WDT register */ | 
 | 	outb(UNLOCK, wdt->io_base + WDT_REG_LOCK); | 
 |  | 
 | 	ret = watchdog_register_device(wdd); | 
 | 	if (ret) { | 
 | 		outb(LOCK, wdt->io_base + WDT_REG_LOCK); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	dev_dbg(dev, "io_base=0x%04X, timeout=%d, nowayout=%d\n", | 
 | 		wdt->io_base, timeout, nowayout); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void nic7018_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct nic7018_wdt *wdt = platform_get_drvdata(pdev); | 
 |  | 
 | 	watchdog_unregister_device(&wdt->wdd); | 
 |  | 
 | 	/* Lock WDT register */ | 
 | 	outb(LOCK, wdt->io_base + WDT_REG_LOCK); | 
 | } | 
 |  | 
 | static const struct acpi_device_id nic7018_device_ids[] = { | 
 | 	{"NIC7018", 0}, | 
 | 	{"", 0}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(acpi, nic7018_device_ids); | 
 |  | 
 | static struct platform_driver watchdog_driver = { | 
 | 	.probe = nic7018_probe, | 
 | 	.remove_new = nic7018_remove, | 
 | 	.driver = { | 
 | 		.name = KBUILD_MODNAME, | 
 | 		.acpi_match_table = ACPI_PTR(nic7018_device_ids), | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(watchdog_driver); | 
 |  | 
 | MODULE_DESCRIPTION("National Instruments NIC7018 Watchdog driver"); | 
 | MODULE_AUTHOR("Hui Chun Ong <hui.chun.ong@ni.com>"); | 
 | MODULE_LICENSE("GPL"); |