|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * ACPI 3.0 based NUMA setup | 
|  | * Copyright 2004 Andi Kleen, SuSE Labs. | 
|  | * | 
|  | * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs. | 
|  | * | 
|  | * Called from acpi_numa_init while reading the SRAT and SLIT tables. | 
|  | * Assumes all memory regions belonging to a single proximity domain | 
|  | * are in one chunk. Holes between them will be included in the node. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/mmzone.h> | 
|  | #include <linux/bitmap.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/topology.h> | 
|  | #include <linux/mm.h> | 
|  | #include <asm/proto.h> | 
|  | #include <asm/numa.h> | 
|  | #include <asm/e820/api.h> | 
|  | #include <asm/apic.h> | 
|  | #include <asm/uv/uv.h> | 
|  |  | 
|  | /* Callback for Proximity Domain -> x2APIC mapping */ | 
|  | void __init | 
|  | acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa) | 
|  | { | 
|  | int pxm, node; | 
|  | int apic_id; | 
|  |  | 
|  | if (srat_disabled()) | 
|  | return; | 
|  | if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) { | 
|  | bad_srat(); | 
|  | return; | 
|  | } | 
|  | if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) | 
|  | return; | 
|  | pxm = pa->proximity_domain; | 
|  | apic_id = pa->apic_id; | 
|  | if (!apic_id_valid(apic_id)) { | 
|  | pr_info("SRAT: PXM %u -> X2APIC 0x%04x ignored\n", pxm, apic_id); | 
|  | return; | 
|  | } | 
|  | node = acpi_map_pxm_to_node(pxm); | 
|  | if (node < 0) { | 
|  | printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); | 
|  | bad_srat(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (apic_id >= MAX_LOCAL_APIC) { | 
|  | printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); | 
|  | return; | 
|  | } | 
|  | set_apicid_to_node(apic_id, node); | 
|  | node_set(node, numa_nodes_parsed); | 
|  | printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n", | 
|  | pxm, apic_id, node); | 
|  | } | 
|  |  | 
|  | /* Callback for Proximity Domain -> LAPIC mapping */ | 
|  | void __init | 
|  | acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa) | 
|  | { | 
|  | int pxm, node; | 
|  | int apic_id; | 
|  |  | 
|  | if (srat_disabled()) | 
|  | return; | 
|  | if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) { | 
|  | bad_srat(); | 
|  | return; | 
|  | } | 
|  | if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0) | 
|  | return; | 
|  | pxm = pa->proximity_domain_lo; | 
|  | if (acpi_srat_revision >= 2) | 
|  | pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8; | 
|  | node = acpi_map_pxm_to_node(pxm); | 
|  | if (node < 0) { | 
|  | printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm); | 
|  | bad_srat(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (get_uv_system_type() >= UV_X2APIC) | 
|  | apic_id = (pa->apic_id << 8) | pa->local_sapic_eid; | 
|  | else | 
|  | apic_id = pa->apic_id; | 
|  |  | 
|  | if (apic_id >= MAX_LOCAL_APIC) { | 
|  | printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node); | 
|  | return; | 
|  | } | 
|  |  | 
|  | set_apicid_to_node(apic_id, node); | 
|  | node_set(node, numa_nodes_parsed); | 
|  | printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n", | 
|  | pxm, apic_id, node); | 
|  | } | 
|  |  | 
|  | int __init x86_acpi_numa_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = acpi_numa_init(); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | return srat_disabled() ? -EINVAL : 0; | 
|  | } |