| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2025, Altera Corporation |
| */ |
| #include "socfpga_agilex5.dtsi" |
| |
| / { |
| model = "SoCFPGA Agilex3 SoCDK"; |
| compatible = "intel,socfpga-agilex3-socdk", "intel,socfpga-agilex3", |
| "intel,socfpga-agilex5"; |
| |
| aliases { |
| serial0 = &uart0; |
| ethernet2 = &gmac2; |
| i3c0 = &i3c0; |
| i3c1 = &i3c1; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| cpus { |
| /delete-node/ cpu@2; |
| /delete-node/ cpu@3; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led0 { |
| label = "hps_led0"; |
| gpios = <&porta 1 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| led1 { |
| label = "hps_led1"; |
| gpios = <&porta 12 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the reg */ |
| reg = <0x0 0x80000000 0x0 0x0>; |
| }; |
| }; |
| |
| &gmac2 { |
| status = "okay"; |
| phy-mode = "rgmii-id"; |
| phy-handle = <&emac2_phy0>; |
| max-frame-size = <9000>; |
| |
| mdio0 { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| emac2_phy0: ethernet-phy@0 { |
| reg = <0>; |
| rxc-skew-ps = <0>; |
| rxdv-skew-ps = <0>; |
| rxd0-skew-ps = <0>; |
| rxd1-skew-ps = <0>; |
| rxd2-skew-ps = <0>; |
| rxd3-skew-ps = <0>; |
| txc-skew-ps = <0>; |
| txen-skew-ps = <60>; |
| txd0-skew-ps = <60>; |
| txd1-skew-ps = <60>; |
| txd2-skew-ps = <60>; |
| txd3-skew-ps = <60>; |
| }; |
| }; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &osc1 { |
| clock-frequency = <25000000>; |
| }; |
| |
| &qspi { |
| status = "okay"; |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <100000000>; |
| m25p,fast-read; |
| cdns,read-delay = <2>; |
| cdns,tshsl-ns = <50>; |
| cdns,tsd2d-ns = <50>; |
| cdns,tchsh-ns = <4>; |
| cdns,tslch-ns = <4>; |
| spi-tx-bus-width = <4>; |
| spi-rx-bus-width = <4>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| qspi_boot: partition@0 { |
| label = "u-boot"; |
| reg = <0x0 0x00c00000>; |
| }; |
| |
| root: partition@c00000 { |
| label = "root"; |
| reg = <0x00c00000 0x03400000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &smmu { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &watchdog0 { |
| status = "okay"; |
| }; |