| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2024 Firefly Technology Co. Ltd |
| * Copyright (c) 2024 Heiko Stuebner <heiko@sntech.de> |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/pinctrl/rockchip.h> |
| #include <dt-bindings/pwm/pwm.h> |
| #include <dt-bindings/soc/rockchip,vop2.h> |
| #include <dt-bindings/usb/pd.h> |
| #include "rk3576.dtsi" |
| |
| / { |
| model = "Firefly ROC-RK3576-PC"; |
| compatible = "firefly,roc-rk3576-pc", "rockchip,rk3576"; |
| |
| aliases { |
| mmc0 = &sdhci; |
| mmc1 = &sdmmc; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:1500000n8"; |
| }; |
| |
| adc-keys-0 { |
| compatible = "adc-keys"; |
| io-channels = <&saradc 0>; |
| io-channel-names = "buttons"; |
| keyup-threshold-microvolt = <1800000>; |
| poll-interval = <100>; |
| |
| button-maskrom { |
| label = "Maskrom"; |
| linux,code = <KEY_SETUP>; |
| press-threshold-microvolt = <17000>; |
| }; |
| }; |
| |
| adc-keys-1 { |
| compatible = "adc-keys"; |
| io-channels = <&saradc 1>; |
| io-channel-names = "buttons"; |
| keyup-threshold-microvolt = <1800000>; |
| poll-interval = <100>; |
| |
| button-recovery { |
| label = "Recovery"; |
| linux,code = <KEY_VENDOR>; |
| press-threshold-microvolt = <17000>; |
| }; |
| }; |
| |
| hdmi-con { |
| compatible = "hdmi-connector"; |
| type = "a"; |
| |
| port { |
| hdmi_con_in: endpoint { |
| remote-endpoint = <&hdmi_out_con>; |
| }; |
| }; |
| }; |
| |
| vbus5v0_typec: regulator-vbus5v0-typec { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb_otg0_pwren_h>; |
| regulator-name = "vbus5v0_typec"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&vcc5v0_device_s0>; |
| }; |
| |
| vcc12v_dcin: regulator-vcc12v-dcin { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc12v_dcin"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| }; |
| |
| vcc1v2_ufs_vccq_s0: regulator-vcc1v2-ufs-vccq-s0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc1v2_ufs_vccq_s0"; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| vin-supply = <&vcc5v0_sys_s5>; |
| }; |
| |
| vcc1v8_ufs_vccq2_s0: regulator-vcc1v8-ufs-vccq2-s0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc1v8_ufs_vccq2_s0"; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vcc_1v8_s3>; |
| }; |
| |
| vcc3v3_lcd_s0: regulator-vcc3v3-lcd-s0 { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&lcd_pwren_h>; |
| regulator-name = "vcc3v3-lcd-s0"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vcc_3v3_s3>; |
| }; |
| |
| vcc3v3_pcie: regulator-vcc3v3-pcie { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pcie_pwren_h>; |
| regulator-name = "vcc3v3_pcie"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| startup-delay-us = <5000>; |
| vin-supply = <&vcc12v_dcin>; |
| }; |
| |
| vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc3v3_rtc_s5"; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vcc5v0_sys_s5>; |
| }; |
| |
| vcc5v0_device_s0: regulator-vcc5v0-device-s0 { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&vcc5vd_en>; |
| regulator-name = "vcc5v0_device"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&vcc12v_dcin>; |
| }; |
| |
| vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_sys"; |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&vcc12v_dcin>; |
| }; |
| |
| vcc5v0_usb20_host1: regulator-vcc5v0-usb20-host1 { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb3_host_pwren_h>; |
| regulator-name = "vcc5v0_host1"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| vin-supply = <&vcc5v0_device_s0>; |
| }; |
| |
| vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_1v1_nldo_s3"; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-min-microvolt = <1100000>; |
| regulator-max-microvolt = <1100000>; |
| vin-supply = <&vcc5v0_sys_s5>; |
| }; |
| |
| vcc_1v8_s0: regulator-vcc-1v8-s0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_1v8_s0"; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| vin-supply = <&vcc_1v8_s3>; |
| }; |
| |
| vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_2v0_pldo_s3"; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-min-microvolt = <2000000>; |
| regulator-max-microvolt = <2000000>; |
| vin-supply = <&vcc5v0_sys_s5>; |
| }; |
| |
| vcc_3v3_s0: regulator-vcc-3v3-s0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_3v3_s0"; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vcc_3v3_s3>; |
| }; |
| |
| vcc_ufs_s0: regulator-vcc-ufs-s0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc_ufs_s0"; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <&vcc5v0_sys_s5>; |
| }; |
| }; |
| |
| &cpu_l0 { |
| cpu-supply = <&vdd_cpu_lit_s0>; |
| }; |
| |
| &cpu_l1 { |
| cpu-supply = <&vdd_cpu_lit_s0>; |
| }; |
| |
| &cpu_l2 { |
| cpu-supply = <&vdd_cpu_lit_s0>; |
| }; |
| |
| &cpu_l3 { |
| cpu-supply = <&vdd_cpu_lit_s0>; |
| }; |
| |
| &cpu_b0 { |
| cpu-supply = <&vdd_cpu_big_s0>; |
| }; |
| |
| &cpu_b1 { |
| cpu-supply = <&vdd_cpu_big_s0>; |
| }; |
| |
| &cpu_b2 { |
| cpu-supply = <&vdd_cpu_big_s0>; |
| }; |
| |
| &cpu_b3 { |
| cpu-supply = <&vdd_cpu_big_s0>; |
| }; |
| |
| &gpu { |
| mali-supply = <&vdd_gpu_s0>; |
| status = "okay"; |
| }; |
| |
| &gmac0 { |
| clock_in_out = "output"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <ð0m0_miim |
| ð0m0_tx_bus2 |
| ð0m0_rx_bus2 |
| ð0m0_rgmii_clk |
| ð0m0_rgmii_bus |
| ðm0_clk0_25m_out>; |
| /* Use rgmii-rxid mode to disable rx delay inside Soc */ |
| phy-mode = "rgmii-rxid"; |
| phy-handle = <&rgmii_phy0>; |
| tx_delay = <0x21>; |
| status = "okay"; |
| }; |
| |
| &hdmi { |
| frl-enable-gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>; |
| pinctrl-0 = <&hdmi_txm0_pins &hdmi_tx_scl &hdmi_tx_sda &hdmi_tx_on_h>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &hdmi_in { |
| hdmi_in_vp0: endpoint { |
| remote-endpoint = <&vp0_out_hdmi>; |
| }; |
| }; |
| |
| &hdmi_out { |
| hdmi_out_con: endpoint { |
| remote-endpoint = <&hdmi_con_in>; |
| }; |
| }; |
| |
| &hdptxphy { |
| status = "okay"; |
| }; |
| |
| &mdio0 { |
| status = "okay"; |
| |
| rgmii_phy0: phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0x1>; |
| clocks = <&cru REFCLKO25M_GMAC0_OUT>; |
| /* Reset time is 20ms, 100ms for rtl8211f */ |
| reset-delay-us = <20000>; |
| reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; |
| reset-post-delay-us = <100000>; |
| }; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| |
| pmic@23 { |
| compatible = "rockchip,rk806"; |
| reg = <0x23>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <6 IRQ_TYPE_LEVEL_LOW>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, |
| <&rk806_dvs2_null>, <&rk806_dvs3_null>; |
| system-power-controller; |
| |
| vcc1-supply = <&vcc5v0_sys_s5>; |
| vcc2-supply = <&vcc5v0_sys_s5>; |
| vcc3-supply = <&vcc5v0_sys_s5>; |
| vcc4-supply = <&vcc5v0_sys_s5>; |
| vcc5-supply = <&vcc5v0_sys_s5>; |
| vcc6-supply = <&vcc5v0_sys_s5>; |
| vcc7-supply = <&vcc5v0_sys_s5>; |
| vcc8-supply = <&vcc5v0_sys_s5>; |
| vcc9-supply = <&vcc5v0_sys_s5>; |
| vcc10-supply = <&vcc5v0_sys_s5>; |
| vcc11-supply = <&vcc_2v0_pldo_s3>; |
| vcc12-supply = <&vcc5v0_sys_s5>; |
| vcc13-supply = <&vcc_1v1_nldo_s3>; |
| vcc14-supply = <&vcc_1v1_nldo_s3>; |
| vcca-supply = <&vcc5v0_sys_s5>; |
| |
| rk806_dvs1_null: dvs1-null-pins { |
| pins = "gpio_pwrctrl1"; |
| function = "pin_fun0"; |
| }; |
| |
| rk806_dvs2_null: dvs2-null-pins { |
| pins = "gpio_pwrctrl2"; |
| function = "pin_fun0"; |
| }; |
| |
| rk806_dvs3_null: dvs3-null-pins { |
| pins = "gpio_pwrctrl3"; |
| function = "pin_fun0"; |
| }; |
| |
| rk806_dvs1_slp: dvs1-slp-pins { |
| pins = "gpio_pwrctrl1"; |
| function = "pin_fun1"; |
| }; |
| |
| rk806_dvs1_pwrdn: dvs1-pwrdn-pins { |
| pins = "gpio_pwrctrl1"; |
| function = "pin_fun2"; |
| }; |
| |
| rk806_dvs1_rst: dvs1-rst-pins { |
| pins = "gpio_pwrctrl1"; |
| function = "pin_fun3"; |
| }; |
| |
| rk806_dvs2_slp: dvs2-slp-pins { |
| pins = "gpio_pwrctrl2"; |
| function = "pin_fun1"; |
| }; |
| |
| rk806_dvs2_pwrdn: dvs2-pwrdn-pins { |
| pins = "gpio_pwrctrl2"; |
| function = "pin_fun2"; |
| }; |
| |
| rk806_dvs2_rst: dvs2-rst-pins { |
| pins = "gpio_pwrctrl2"; |
| function = "pin_fun3"; |
| }; |
| |
| rk806_dvs2_dvs: dvs2-dvs-pins { |
| pins = "gpio_pwrctrl2"; |
| function = "pin_fun4"; |
| }; |
| |
| rk806_dvs2_gpio: dvs2-gpio-pins { |
| pins = "gpio_pwrctrl2"; |
| function = "pin_fun5"; |
| }; |
| |
| rk806_dvs3_slp: dvs3-slp-pins { |
| pins = "gpio_pwrctrl3"; |
| function = "pin_fun1"; |
| }; |
| |
| rk806_dvs3_pwrdn: dvs3-pwrdn-pins { |
| pins = "gpio_pwrctrl3"; |
| function = "pin_fun2"; |
| }; |
| |
| rk806_dvs3_rst: dvs3-rst-pins { |
| pins = "gpio_pwrctrl3"; |
| function = "pin_fun3"; |
| }; |
| |
| rk806_dvs3_dvs: dvs3-dvs-pins { |
| pins = "gpio_pwrctrl3"; |
| function = "pin_fun4"; |
| }; |
| |
| rk806_dvs3_gpio: dvs3-gpio-pins { |
| pins = "gpio_pwrctrl3"; |
| function = "pin_fun5"; |
| }; |
| |
| regulators { |
| vdd_cpu_big_s0: dcdc-reg1 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <550000>; |
| regulator-max-microvolt = <950000>; |
| regulator-ramp-delay = <12500>; |
| regulator-name = "vdd_cpu_big_s0"; |
| regulator-enable-ramp-delay = <400>; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdd_npu_s0: dcdc-reg2 { |
| regulator-boot-on; |
| regulator-min-microvolt = <550000>; |
| regulator-max-microvolt = <950000>; |
| regulator-ramp-delay = <12500>; |
| regulator-name = "vdd_npu_s0"; |
| regulator-enable-ramp-delay = <400>; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdd_cpu_lit_s0: dcdc-reg3 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <550000>; |
| regulator-max-microvolt = <950000>; |
| regulator-ramp-delay = <12500>; |
| regulator-name = "vdd_cpu_lit_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| regulator-suspend-microvolt = <750000>; |
| }; |
| }; |
| |
| vcc_3v3_s3: dcdc-reg4 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcc_3v3_s3"; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-suspend-microvolt = <3300000>; |
| }; |
| }; |
| |
| vdd_gpu_s0: dcdc-reg5 { |
| regulator-boot-on; |
| regulator-min-microvolt = <550000>; |
| regulator-max-microvolt = <900000>; |
| regulator-ramp-delay = <12500>; |
| regulator-name = "vdd_gpu_s0"; |
| regulator-enable-ramp-delay = <400>; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| regulator-suspend-microvolt = <850000>; |
| }; |
| }; |
| |
| vddq_ddr_s0: dcdc-reg6 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-name = "vddq_ddr_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdd_logic_s0: dcdc-reg7 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <550000>; |
| regulator-max-microvolt = <800000>; |
| regulator-name = "vdd_logic_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcc_1v8_s3: dcdc-reg8 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-name = "vcc_1v8_s3"; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-suspend-microvolt = <1800000>; |
| }; |
| }; |
| |
| vdd2_ddr_s3: dcdc-reg9 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-name = "vdd2_ddr_s3"; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| }; |
| }; |
| |
| vdd_ddr_s0: dcdc-reg10 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <550000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-name = "vdd_ddr_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcca_1v8_s0: pldo-reg1 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-name = "vcca_1v8_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcca1v8_pldo2_s0: pldo-reg2 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-name = "vcca1v8_pldo2_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdda_1v2_s0: pldo-reg3 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-name = "vdda_1v2_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcca_3v3_s0: pldo-reg4 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vcca_3v3_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vccio_sd_s0: pldo-reg5 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "vccio_sd_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vcca1v8_pldo6_s3: pldo-reg6 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-name = "vcca1v8_pldo6_s3"; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-suspend-microvolt = <1800000>; |
| }; |
| }; |
| |
| vdd_0v75_s3: nldo-reg1 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <750000>; |
| regulator-name = "vdd_0v75_s3"; |
| regulator-state-mem { |
| regulator-on-in-suspend; |
| regulator-suspend-microvolt = <750000>; |
| }; |
| }; |
| |
| vdda_ddr_pll_s0: nldo-reg2 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <850000>; |
| regulator-name = "vdda_ddr_pll_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdda0v75_hdmi_s0: nldo-reg3 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <837500>; |
| regulator-max-microvolt = <837500>; |
| regulator-name = "vdda0v75_hdmi_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdda_0v85_s0: nldo-reg4 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <850000>; |
| regulator-max-microvolt = <850000>; |
| regulator-name = "vdda_0v85_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| |
| vdda_0v75_s0: nldo-reg5 { |
| regulator-always-on; |
| regulator-boot-on; |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <750000>; |
| regulator-name = "vdda_0v75_s0"; |
| regulator-state-mem { |
| regulator-off-in-suspend; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| |
| /* pc9202 watchdog@3c with enable-gpio gpio0-c3 */ |
| |
| /* hnyetek,husb311 typec-portc@4e */ |
| |
| hym8563: rtc@51 { |
| compatible = "haoyu,hym8563"; |
| reg = <0x51>; |
| #clock-cells = <0>; |
| clock-output-names = "hym8563"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&rtc_int_l>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>; |
| wakeup-source; |
| }; |
| }; |
| |
| &saradc { |
| vref-supply = <&vcca_1v8_s0>; |
| status = "okay"; |
| }; |
| |
| &sdhci { |
| bus-width = <8>; |
| no-sdio; |
| no-sd; |
| non-removable; |
| max-frequency = <200000000>; |
| mmc-hs400-1_8v; |
| mmc-hs400-enhanced-strobe; |
| full-pwr-cycle-in-suspend; |
| status = "okay"; |
| }; |
| |
| &sdmmc { |
| max-frequency = <200000000>; |
| no-sdio; |
| no-mmc; |
| bus-width = <4>; |
| cap-mmc-highspeed; |
| cap-sd-highspeed; |
| disable-wp; |
| sd-uhs-sdr104; |
| vqmmc-supply = <&vccio_sd_s0>; |
| status = "okay"; |
| }; |
| |
| &pinctrl { |
| hdmi { |
| hdmi_tx_on_h: hdmi-tx-on-h { |
| rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| hym8563 { |
| rtc_int_l: rtc-int-l { |
| rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| }; |
| |
| power { |
| lcd_pwren_h: lcd-pwren-h { |
| rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| vcc5vd_en: vcc5vd-en { |
| rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| pcie_pwren_h: pcie-pwren-h { |
| rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| |
| usb { |
| hub_reset_h: hub-reset-h { |
| rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| usb3_host_pwren_h: usb3-host-pwren-h { |
| rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| usb_otg0_pwren_h: usb-otg0-pwren-h { |
| rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| usbc0_int_l: usbc0-int-l { |
| rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| }; |
| }; |
| |
| watchdog { |
| wd_en: wd-en { |
| rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| }; |
| }; |
| |
| &uart0 { |
| pinctrl-0 = <&uart0m0_xfer>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn>; |
| status = "okay"; |
| }; |
| |
| /* On the extension pin header */ |
| &uart6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart6m3_xfer>; |
| status = "okay"; |
| }; |
| |
| &vop { |
| status = "okay"; |
| }; |
| |
| &vop_mmu { |
| status = "okay"; |
| }; |
| |
| &vp0 { |
| vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { |
| reg = <ROCKCHIP_VOP2_EP_HDMI0>; |
| remote-endpoint = <&hdmi_in_vp0>; |
| }; |
| }; |
