| /* | |
| * Copyright © 2012 Intel Corporation | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS | |
| * IN THE SOFTWARE. | |
| * | |
| * Authors: | |
| * Eugeni Dodonov <eugeni.dodonov@intel.com> | |
| * | |
| */ | |
| #include <linux/iopoll.h> | |
| #include <linux/seq_buf.h> | |
| #include <linux/string_helpers.h> | |
| #include <drm/display/drm_dp_helper.h> | |
| #include <drm/display/drm_scdc_helper.h> | |
| #include <drm/drm_print.h> | |
| #include <drm/drm_privacy_screen_consumer.h> | |
| #include <drm/intel/step.h> | |
| #include "icl_dsi.h" | |
| #include "intel_alpm.h" | |
| #include "intel_audio.h" | |
| #include "intel_audio_regs.h" | |
| #include "intel_backlight.h" | |
| #include "intel_combo_phy.h" | |
| #include "intel_combo_phy_regs.h" | |
| #include "intel_connector.h" | |
| #include "intel_crtc.h" | |
| #include "intel_cx0_phy.h" | |
| #include "intel_cx0_phy_regs.h" | |
| #include "intel_ddi.h" | |
| #include "intel_ddi_buf_trans.h" | |
| #include "intel_de.h" | |
| #include "intel_display_power.h" | |
| #include "intel_display_regs.h" | |
| #include "intel_display_types.h" | |
| #include "intel_display_utils.h" | |
| #include "intel_display_wa.h" | |
| #include "intel_dkl_phy.h" | |
| #include "intel_dkl_phy_regs.h" | |
| #include "intel_dp.h" | |
| #include "intel_dp_aux.h" | |
| #include "intel_dp_link_training.h" | |
| #include "intel_dp_mst.h" | |
| #include "intel_dp_test.h" | |
| #include "intel_dp_tunnel.h" | |
| #include "intel_dpio_phy.h" | |
| #include "intel_dsi.h" | |
| #include "intel_encoder.h" | |
| #include "intel_fdi.h" | |
| #include "intel_fifo_underrun.h" | |
| #include "intel_gmbus.h" | |
| #include "intel_hdcp.h" | |
| #include "intel_hdmi.h" | |
| #include "intel_hotplug.h" | |
| #include "intel_hti.h" | |
| #include "intel_lspcon.h" | |
| #include "intel_lt_phy.h" | |
| #include "intel_mg_phy_regs.h" | |
| #include "intel_modeset_lock.h" | |
| #include "intel_panel.h" | |
| #include "intel_pfit.h" | |
| #include "intel_pps.h" | |
| #include "intel_psr.h" | |
| #include "intel_quirks.h" | |
| #include "intel_snps_phy.h" | |
| #include "intel_tc.h" | |
| #include "intel_vdsc.h" | |
| #include "intel_vdsc_regs.h" | |
| #include "intel_vrr.h" | |
| #include "skl_scaler.h" | |
| #include "skl_universal_plane.h" | |
| struct intel_dpll; | |
| static const u8 index_to_dp_signal_levels[] = { | |
| [0] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0, | |
| [1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1, | |
| [2] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2, | |
| [3] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3, | |
| [4] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0, | |
| [5] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1, | |
| [6] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2, | |
| [7] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0, | |
| [8] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1, | |
| [9] = DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0, | |
| }; | |
| static int intel_ddi_hdmi_level(struct intel_encoder *encoder, | |
| const struct intel_ddi_buf_trans *trans) | |
| { | |
| int level; | |
| level = intel_bios_hdmi_level_shift(encoder->devdata); | |
| if (level < 0) | |
| level = trans->hdmi_default_entry; | |
| return level; | |
| } | |
| static bool has_buf_trans_select(struct intel_display *display) | |
| { | |
| return DISPLAY_VER(display) < 10 && !display->platform.broxton; | |
| } | |
| static bool has_iboost(struct intel_display *display) | |
| { | |
| return DISPLAY_VER(display) == 9 && !display->platform.broxton; | |
| } | |
| /* | |
| * Starting with Haswell, DDI port buffers must be programmed with correct | |
| * values in advance. This function programs the correct values for | |
| * DP/eDP/FDI use cases. | |
| */ | |
| void hsw_prepare_dp_ddi_buffers(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| u32 iboost_bit = 0; | |
| int i, n_entries; | |
| enum port port = encoder->port; | |
| const struct intel_ddi_buf_trans *trans; | |
| trans = intel_ddi_buf_trans_get(encoder, crtc_state, &n_entries); | |
| if (drm_WARN_ON_ONCE(display->drm, !trans)) | |
| return; | |
| /* If we're boosting the current, set bit 31 of trans1 */ | |
| if (has_iboost(display) && | |
| intel_bios_dp_boost_level(encoder->devdata)) | |
| iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; | |
| for (i = 0; i < n_entries; i++) { | |
| intel_de_write(display, DDI_BUF_TRANS_LO(port, i), | |
| trans->entries[i].hsw.trans1 | iboost_bit); | |
| intel_de_write(display, DDI_BUF_TRANS_HI(port, i), | |
| trans->entries[i].hsw.trans2); | |
| } | |
| } | |
| /* | |
| * Starting with Haswell, DDI port buffers must be programmed with correct | |
| * values in advance. This function programs the correct values for | |
| * HDMI/DVI use cases. | |
| */ | |
| static void hsw_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| int level = intel_ddi_level(encoder, crtc_state, 0); | |
| u32 iboost_bit = 0; | |
| int n_entries; | |
| enum port port = encoder->port; | |
| const struct intel_ddi_buf_trans *trans; | |
| trans = intel_ddi_buf_trans_get(encoder, crtc_state, &n_entries); | |
| if (drm_WARN_ON_ONCE(display->drm, !trans)) | |
| return; | |
| /* If we're boosting the current, set bit 31 of trans1 */ | |
| if (has_iboost(display) && | |
| intel_bios_hdmi_boost_level(encoder->devdata)) | |
| iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; | |
| /* Entry 9 is for HDMI: */ | |
| intel_de_write(display, DDI_BUF_TRANS_LO(port, 9), | |
| trans->entries[level].hsw.trans1 | iboost_bit); | |
| intel_de_write(display, DDI_BUF_TRANS_HI(port, 9), | |
| trans->entries[level].hsw.trans2); | |
| } | |
| static intel_reg_t intel_ddi_buf_status_reg(struct intel_display *display, enum port port) | |
| { | |
| if (DISPLAY_VER(display) >= 14) | |
| return XELPDP_PORT_BUF_CTL1(display, port); | |
| else | |
| return DDI_BUF_CTL(port); | |
| } | |
| void intel_wait_ddi_buf_idle(struct intel_display *display, enum port port) | |
| { | |
| /* | |
| * Bspec's platform specific timeouts: | |
| * MTL+ : 100 us | |
| * BXT : fixed 16 us | |
| * HSW-ADL: 8 us | |
| * | |
| * FIXME: MTL requires 10 ms based on tests, find out why 100 us is too short | |
| */ | |
| if (display->platform.broxton) { | |
| udelay(16); | |
| return; | |
| } | |
| static_assert(DDI_BUF_IS_IDLE == XELPDP_PORT_BUF_PHY_IDLE); | |
| if (intel_de_wait_for_set_ms(display, intel_ddi_buf_status_reg(display, port), | |
| DDI_BUF_IS_IDLE, 10)) | |
| drm_err(display->drm, "Timeout waiting for DDI BUF %c to get idle\n", | |
| port_name(port)); | |
| } | |
| static void intel_wait_ddi_buf_active(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| /* | |
| * Bspec's platform specific timeouts: | |
| * MTL+ : 10000 us | |
| * DG2 : 1200 us | |
| * TGL-ADL combo PHY: 1000 us | |
| * TGL-ADL TypeC PHY: 3000 us | |
| * HSW-ICL : fixed 518 us | |
| */ | |
| if (DISPLAY_VER(display) < 10) { | |
| usleep_range(518, 1000); | |
| return; | |
| } | |
| static_assert(DDI_BUF_IS_IDLE == XELPDP_PORT_BUF_PHY_IDLE); | |
| if (intel_de_wait_for_clear_ms(display, intel_ddi_buf_status_reg(display, port), | |
| DDI_BUF_IS_IDLE, 10)) | |
| drm_err(display->drm, "Timeout waiting for DDI BUF %c to get active\n", | |
| port_name(port)); | |
| } | |
| static u32 hsw_pll_to_ddi_pll_sel(const struct intel_dpll *pll) | |
| { | |
| switch (pll->info->id) { | |
| case DPLL_ID_WRPLL1: | |
| return PORT_CLK_SEL_WRPLL1; | |
| case DPLL_ID_WRPLL2: | |
| return PORT_CLK_SEL_WRPLL2; | |
| case DPLL_ID_SPLL: | |
| return PORT_CLK_SEL_SPLL; | |
| case DPLL_ID_LCPLL_810: | |
| return PORT_CLK_SEL_LCPLL_810; | |
| case DPLL_ID_LCPLL_1350: | |
| return PORT_CLK_SEL_LCPLL_1350; | |
| case DPLL_ID_LCPLL_2700: | |
| return PORT_CLK_SEL_LCPLL_2700; | |
| default: | |
| MISSING_CASE(pll->info->id); | |
| return PORT_CLK_SEL_NONE; | |
| } | |
| } | |
| static u32 icl_pll_to_ddi_clk_sel(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| int clock = crtc_state->port_clock; | |
| const enum intel_dpll_id id = pll->info->id; | |
| switch (id) { | |
| default: | |
| /* | |
| * DPLL_ID_ICL_DPLL0 and DPLL_ID_ICL_DPLL1 should not be used | |
| * here, so do warn if this get passed in | |
| */ | |
| MISSING_CASE(id); | |
| return DDI_CLK_SEL_NONE; | |
| case DPLL_ID_ICL_TBTPLL: | |
| switch (clock) { | |
| case 162000: | |
| return DDI_CLK_SEL_TBT_162; | |
| case 270000: | |
| return DDI_CLK_SEL_TBT_270; | |
| case 540000: | |
| return DDI_CLK_SEL_TBT_540; | |
| case 810000: | |
| return DDI_CLK_SEL_TBT_810; | |
| default: | |
| MISSING_CASE(clock); | |
| return DDI_CLK_SEL_NONE; | |
| } | |
| case DPLL_ID_ICL_MGPLL1: | |
| case DPLL_ID_ICL_MGPLL2: | |
| case DPLL_ID_ICL_MGPLL3: | |
| case DPLL_ID_ICL_MGPLL4: | |
| case DPLL_ID_TGL_MGPLL5: | |
| case DPLL_ID_TGL_MGPLL6: | |
| return DDI_CLK_SEL_MG; | |
| } | |
| } | |
| static u32 ddi_buf_phy_link_rate(int port_clock) | |
| { | |
| switch (port_clock) { | |
| case 162000: | |
| return DDI_BUF_PHY_LINK_RATE(0); | |
| case 216000: | |
| return DDI_BUF_PHY_LINK_RATE(4); | |
| case 243000: | |
| return DDI_BUF_PHY_LINK_RATE(5); | |
| case 270000: | |
| return DDI_BUF_PHY_LINK_RATE(1); | |
| case 324000: | |
| return DDI_BUF_PHY_LINK_RATE(6); | |
| case 432000: | |
| return DDI_BUF_PHY_LINK_RATE(7); | |
| case 540000: | |
| return DDI_BUF_PHY_LINK_RATE(2); | |
| case 810000: | |
| return DDI_BUF_PHY_LINK_RATE(3); | |
| default: | |
| MISSING_CASE(port_clock); | |
| return DDI_BUF_PHY_LINK_RATE(0); | |
| } | |
| } | |
| static int dp_phy_lane_stagger_delay(int port_clock) | |
| { | |
| /* | |
| * Return the number of symbol clocks delay used to stagger the | |
| * assertion/desassertion of the port lane enables. The target delay | |
| * time is 100 ns or greater, return the number of symbols specific to | |
| * the provided port_clock (aka link clock) corresponding to this delay | |
| * time, i.e. so that | |
| * | |
| * number_of_symbols * duration_of_one_symbol >= 100 ns | |
| * | |
| * The delay must be applied only on TypeC DP outputs, for everything else | |
| * the delay must be set to 0. | |
| * | |
| * Return the number of link symbols per 100 ns: | |
| * port_clock (10 kHz) -> bits / 100 us | |
| * / symbol_size -> symbols / 100 us | |
| * / 1000 -> symbols / 100 ns | |
| */ | |
| return DIV_ROUND_UP(port_clock, intel_dp_link_symbol_size(port_clock) * 1000); | |
| } | |
| static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| /* DDI_BUF_CTL_ENABLE will be set by intel_ddi_prepare_link_retrain() later */ | |
| intel_dp->DP = DDI_PORT_WIDTH(crtc_state->lane_count) | | |
| DDI_BUF_TRANS_SELECT(0); | |
| if (dig_port->lane_reversal) | |
| intel_dp->DP |= DDI_BUF_PORT_REVERSAL; | |
| if (dig_port->ddi_a_4_lanes) | |
| intel_dp->DP |= DDI_A_4_LANES; | |
| if (DISPLAY_VER(display) >= 14) { | |
| if (intel_dp_is_uhbr(crtc_state)) | |
| intel_dp->DP |= DDI_BUF_PORT_DATA_40BIT; | |
| else | |
| intel_dp->DP |= DDI_BUF_PORT_DATA_10BIT; | |
| } | |
| if (display->platform.alderlake_p && intel_encoder_is_tc(encoder)) { | |
| intel_dp->DP |= ddi_buf_phy_link_rate(crtc_state->port_clock); | |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) | |
| intel_dp->DP |= DDI_BUF_CTL_TC_PHY_OWNERSHIP; | |
| } | |
| if (IS_DISPLAY_VER(display, 11, 13) && intel_encoder_is_tc(encoder)) { | |
| int delay = dp_phy_lane_stagger_delay(crtc_state->port_clock); | |
| intel_dp->DP |= DDI_BUF_LANE_STAGGER_DELAY(delay); | |
| } | |
| } | |
| static int icl_calc_tbt_pll_link(struct intel_display *display, enum port port) | |
| { | |
| u32 val = intel_de_read(display, DDI_CLK_SEL(port)) & DDI_CLK_SEL_MASK; | |
| switch (val) { | |
| case DDI_CLK_SEL_NONE: | |
| return 0; | |
| case DDI_CLK_SEL_TBT_162: | |
| return 162000; | |
| case DDI_CLK_SEL_TBT_270: | |
| return 270000; | |
| case DDI_CLK_SEL_TBT_540: | |
| return 540000; | |
| case DDI_CLK_SEL_TBT_810: | |
| return 810000; | |
| default: | |
| MISSING_CASE(val); | |
| return 0; | |
| } | |
| } | |
| static void ddi_dotclock_get(struct intel_crtc_state *pipe_config) | |
| { | |
| /* CRT dotclock is determined via other means */ | |
| if (pipe_config->has_pch_encoder) | |
| return; | |
| pipe_config->hw.adjusted_mode.crtc_clock = | |
| intel_crtc_dotclock(pipe_config); | |
| } | |
| void intel_ddi_set_dp_msa(const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| u32 temp; | |
| if (!intel_crtc_has_dp_encoder(crtc_state)) | |
| return; | |
| drm_WARN_ON(display->drm, transcoder_is_dsi(cpu_transcoder)); | |
| temp = DP_MSA_MISC_SYNC_CLOCK; | |
| switch (crtc_state->pipe_bpp) { | |
| case 18: | |
| temp |= DP_MSA_MISC_6_BPC; | |
| break; | |
| case 24: | |
| temp |= DP_MSA_MISC_8_BPC; | |
| break; | |
| case 30: | |
| temp |= DP_MSA_MISC_10_BPC; | |
| break; | |
| case 36: | |
| temp |= DP_MSA_MISC_12_BPC; | |
| break; | |
| default: | |
| MISSING_CASE(crtc_state->pipe_bpp); | |
| break; | |
| } | |
| /* nonsense combination */ | |
| drm_WARN_ON(display->drm, crtc_state->limited_color_range && | |
| crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB); | |
| if (crtc_state->limited_color_range) | |
| temp |= DP_MSA_MISC_COLOR_CEA_RGB; | |
| /* | |
| * As per DP 1.2 spec section 2.3.4.3 while sending | |
| * YCBCR 444 signals we should program MSA MISC1/0 fields with | |
| * colorspace information. | |
| */ | |
| if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) | |
| temp |= DP_MSA_MISC_COLOR_YCBCR_444_BT709; | |
| /* | |
| * As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication | |
| * of Color Encoding Format and Content Color Gamut] while sending | |
| * YCBCR 420, HDR BT.2020 signals we should program MSA MISC1 fields | |
| * which indicate VSC SDP for the Pixel Encoding/Colorimetry Format. | |
| * Only set the delegation bit when the content needs it and | |
| * the sink advertises support. | |
| */ | |
| if (intel_dp_needs_vsc_colorimetry(crtc_state, conn_state)) | |
| temp |= DP_MSA_MISC_COLOR_VSC_SDP; | |
| intel_de_write(display, TRANS_MSA_MISC(display, cpu_transcoder), | |
| temp); | |
| } | |
| static u32 bdw_trans_port_sync_master_select(enum transcoder master_transcoder) | |
| { | |
| if (master_transcoder == TRANSCODER_EDP) | |
| return 0; | |
| else | |
| return master_transcoder + 1; | |
| } | |
| static void | |
| intel_ddi_config_transcoder_dp2(const struct intel_crtc_state *crtc_state, | |
| bool enable) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| u32 val = 0; | |
| if (!HAS_DP20(display)) | |
| return; | |
| if (enable && intel_dp_is_uhbr(crtc_state)) | |
| val = TRANS_DP2_128B132B_CHANNEL_CODING; | |
| intel_de_write(display, TRANS_DP2_CTL(cpu_transcoder), val); | |
| } | |
| /* | |
| * Returns the TRANS_DDI_FUNC_CTL value based on CRTC state. | |
| * | |
| * Only intended to be used by intel_ddi_enable_transcoder_func() and | |
| * intel_ddi_config_transcoder_func(). | |
| */ | |
| static u32 | |
| intel_ddi_transcoder_func_reg_val_get(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); | |
| enum pipe pipe = crtc->pipe; | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| enum port port = encoder->port; | |
| u32 temp; | |
| /* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */ | |
| temp = TRANS_DDI_FUNC_ENABLE; | |
| if (DISPLAY_VER(display) >= 12) | |
| temp |= TGL_TRANS_DDI_SELECT_PORT(port); | |
| else | |
| temp |= TRANS_DDI_SELECT_PORT(port); | |
| switch (crtc_state->pipe_bpp) { | |
| default: | |
| MISSING_CASE(crtc_state->pipe_bpp); | |
| fallthrough; | |
| case 18: | |
| temp |= TRANS_DDI_BPC_6; | |
| break; | |
| case 24: | |
| temp |= TRANS_DDI_BPC_8; | |
| break; | |
| case 30: | |
| temp |= TRANS_DDI_BPC_10; | |
| break; | |
| case 36: | |
| temp |= TRANS_DDI_BPC_12; | |
| break; | |
| } | |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC) | |
| temp |= TRANS_DDI_PVSYNC; | |
| if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC) | |
| temp |= TRANS_DDI_PHSYNC; | |
| if (cpu_transcoder == TRANSCODER_EDP) { | |
| switch (pipe) { | |
| default: | |
| MISSING_CASE(pipe); | |
| fallthrough; | |
| case PIPE_A: | |
| /* On Haswell, can only use the always-on power well for | |
| * eDP when not using the panel fitter, and when not | |
| * using motion blur mitigation (which we don't | |
| * support). */ | |
| if (crtc_state->pch_pfit.force_thru) | |
| temp |= TRANS_DDI_EDP_INPUT_A_ONOFF; | |
| else | |
| temp |= TRANS_DDI_EDP_INPUT_A_ON; | |
| break; | |
| case PIPE_B: | |
| temp |= TRANS_DDI_EDP_INPUT_B_ONOFF; | |
| break; | |
| case PIPE_C: | |
| temp |= TRANS_DDI_EDP_INPUT_C_ONOFF; | |
| break; | |
| } | |
| } | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { | |
| if (crtc_state->has_hdmi_sink) | |
| temp |= TRANS_DDI_MODE_SELECT_HDMI; | |
| else | |
| temp |= TRANS_DDI_MODE_SELECT_DVI; | |
| if (crtc_state->hdmi_scrambling) | |
| temp |= TRANS_DDI_HDMI_SCRAMBLING; | |
| if (crtc_state->hdmi_high_tmds_clock_ratio) | |
| temp |= TRANS_DDI_HIGH_TMDS_CHAR_RATE; | |
| if (DISPLAY_VER(display) >= 14) | |
| temp |= TRANS_DDI_PORT_WIDTH(crtc_state->lane_count); | |
| } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) { | |
| temp |= TRANS_DDI_MODE_SELECT_FDI_OR_128B132B; | |
| temp |= (crtc_state->fdi_lanes - 1) << 1; | |
| } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) || | |
| intel_dp_is_uhbr(crtc_state)) { | |
| if (intel_dp_is_uhbr(crtc_state)) | |
| temp |= TRANS_DDI_MODE_SELECT_FDI_OR_128B132B; | |
| else | |
| temp |= TRANS_DDI_MODE_SELECT_DP_MST; | |
| temp |= DDI_PORT_WIDTH(crtc_state->lane_count); | |
| if (DISPLAY_VER(display) >= 12) { | |
| enum transcoder master; | |
| master = crtc_state->mst_master_transcoder; | |
| if (drm_WARN_ON(display->drm, | |
| master == INVALID_TRANSCODER)) | |
| master = TRANSCODER_A; | |
| temp |= TRANS_DDI_MST_TRANSPORT_SELECT(master); | |
| } | |
| } else { | |
| temp |= TRANS_DDI_MODE_SELECT_DP_SST; | |
| temp |= DDI_PORT_WIDTH(crtc_state->lane_count); | |
| } | |
| if (IS_DISPLAY_VER(display, 8, 10) && | |
| crtc_state->master_transcoder != INVALID_TRANSCODER) { | |
| u8 master_select = | |
| bdw_trans_port_sync_master_select(crtc_state->master_transcoder); | |
| temp |= TRANS_DDI_PORT_SYNC_ENABLE | | |
| TRANS_DDI_PORT_SYNC_MASTER_SELECT(master_select); | |
| } | |
| return temp; | |
| } | |
| void intel_ddi_enable_transcoder_func(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| if (DISPLAY_VER(display) >= 11) { | |
| enum transcoder master_transcoder = crtc_state->master_transcoder; | |
| u32 ctl2 = 0; | |
| if (master_transcoder != INVALID_TRANSCODER) { | |
| u8 master_select = | |
| bdw_trans_port_sync_master_select(master_transcoder); | |
| ctl2 |= PORT_SYNC_MODE_ENABLE | | |
| PORT_SYNC_MODE_MASTER_SELECT(master_select); | |
| } | |
| intel_de_write(display, | |
| TRANS_DDI_FUNC_CTL2(display, cpu_transcoder), | |
| ctl2); | |
| } | |
| intel_de_write(display, TRANS_DDI_FUNC_CTL(display, cpu_transcoder), | |
| intel_ddi_transcoder_func_reg_val_get(encoder, | |
| crtc_state)); | |
| } | |
| /* | |
| * Same as intel_ddi_enable_transcoder_func(), but it does not set the enable | |
| * bit for the DDI function and enables the DP2 configuration. Called for all | |
| * transcoder types. | |
| */ | |
| void | |
| intel_ddi_config_transcoder_func(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| u32 ctl; | |
| intel_ddi_config_transcoder_dp2(crtc_state, true); | |
| ctl = intel_ddi_transcoder_func_reg_val_get(encoder, crtc_state); | |
| ctl &= ~TRANS_DDI_FUNC_ENABLE; | |
| intel_de_write(display, TRANS_DDI_FUNC_CTL(display, cpu_transcoder), | |
| ctl); | |
| } | |
| /* | |
| * Disable the DDI function and port syncing. | |
| * For SST, pre-TGL MST, TGL+ MST-slave transcoders: deselect the DDI port, | |
| * SST/MST mode and disable the DP2 configuration. For TGL+ MST-master | |
| * transcoders these are done later in intel_ddi_post_disable_dp(). | |
| */ | |
| void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| u32 ctl; | |
| if (DISPLAY_VER(display) >= 11) | |
| intel_de_write(display, | |
| TRANS_DDI_FUNC_CTL2(display, cpu_transcoder), | |
| 0); | |
| ctl = intel_de_read(display, | |
| TRANS_DDI_FUNC_CTL(display, cpu_transcoder)); | |
| drm_WARN_ON(crtc->base.dev, ctl & TRANS_DDI_HDCP_SIGNALLING); | |
| ctl &= ~TRANS_DDI_FUNC_ENABLE; | |
| if (IS_DISPLAY_VER(display, 8, 10)) | |
| ctl &= ~(TRANS_DDI_PORT_SYNC_ENABLE | | |
| TRANS_DDI_PORT_SYNC_MASTER_SELECT_MASK); | |
| if (DISPLAY_VER(display) >= 12) { | |
| if (!intel_dp_mst_is_master_trans(crtc_state)) { | |
| ctl &= ~(TGL_TRANS_DDI_PORT_MASK | | |
| TRANS_DDI_MODE_SELECT_MASK); | |
| } | |
| } else { | |
| ctl &= ~(TRANS_DDI_PORT_MASK | TRANS_DDI_MODE_SELECT_MASK); | |
| } | |
| intel_de_write(display, TRANS_DDI_FUNC_CTL(display, cpu_transcoder), | |
| ctl); | |
| if (intel_dp_mst_is_slave_trans(crtc_state)) | |
| intel_ddi_config_transcoder_dp2(crtc_state, false); | |
| if (intel_has_quirk(display, QUIRK_INCREASE_DDI_DISABLED_TIME) && | |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { | |
| drm_dbg_kms(display->drm, "Quirk Increase DDI disabled time\n"); | |
| /* Quirk time at 100ms for reliable operation */ | |
| msleep(100); | |
| } | |
| } | |
| int intel_ddi_toggle_hdcp_bits(struct intel_encoder *intel_encoder, | |
| enum transcoder cpu_transcoder, | |
| bool enable, u32 hdcp_mask) | |
| { | |
| struct intel_display *display = to_intel_display(intel_encoder); | |
| struct ref_tracker *wakeref; | |
| int ret = 0; | |
| wakeref = intel_display_power_get_if_enabled(display, | |
| intel_encoder->power_domain); | |
| if (drm_WARN_ON(display->drm, !wakeref)) | |
| return -ENXIO; | |
| intel_de_rmw(display, TRANS_DDI_FUNC_CTL(display, cpu_transcoder), | |
| hdcp_mask, enable ? hdcp_mask : 0); | |
| intel_display_power_put(display, intel_encoder->power_domain, wakeref); | |
| return ret; | |
| } | |
| bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector) | |
| { | |
| struct intel_display *display = to_intel_display(intel_connector); | |
| struct intel_encoder *encoder = intel_attached_encoder(intel_connector); | |
| int type = intel_connector->base.connector_type; | |
| enum port port = encoder->port; | |
| enum transcoder cpu_transcoder; | |
| struct ref_tracker *wakeref; | |
| enum pipe pipe = 0; | |
| u32 ddi_mode; | |
| bool ret; | |
| wakeref = intel_display_power_get_if_enabled(display, | |
| encoder->power_domain); | |
| if (!wakeref) | |
| return false; | |
| /* Note: This returns false for DP MST primary encoders. */ | |
| if (!encoder->get_hw_state(encoder, &pipe)) { | |
| ret = false; | |
| goto out; | |
| } | |
| if (HAS_TRANSCODER(display, TRANSCODER_EDP) && port == PORT_A) | |
| cpu_transcoder = TRANSCODER_EDP; | |
| else | |
| cpu_transcoder = (enum transcoder) pipe; | |
| ddi_mode = intel_de_read(display, TRANS_DDI_FUNC_CTL(display, cpu_transcoder)) & | |
| TRANS_DDI_MODE_SELECT_MASK; | |
| if (ddi_mode == TRANS_DDI_MODE_SELECT_HDMI || | |
| ddi_mode == TRANS_DDI_MODE_SELECT_DVI) { | |
| ret = type == DRM_MODE_CONNECTOR_HDMIA; | |
| } else if (ddi_mode == TRANS_DDI_MODE_SELECT_FDI_OR_128B132B && !HAS_DP20(display)) { | |
| ret = type == DRM_MODE_CONNECTOR_VGA; | |
| } else if (ddi_mode == TRANS_DDI_MODE_SELECT_DP_SST) { | |
| ret = type == DRM_MODE_CONNECTOR_eDP || | |
| type == DRM_MODE_CONNECTOR_DisplayPort; | |
| } else if (ddi_mode == TRANS_DDI_MODE_SELECT_FDI_OR_128B132B && HAS_DP20(display)) { | |
| /* | |
| * encoder->get_hw_state() should have bailed out on MST. This | |
| * must be SST and non-eDP. | |
| */ | |
| ret = type == DRM_MODE_CONNECTOR_DisplayPort; | |
| } else if (drm_WARN_ON(display->drm, ddi_mode == TRANS_DDI_MODE_SELECT_DP_MST)) { | |
| /* encoder->get_hw_state() should have bailed out on MST. */ | |
| ret = false; | |
| } else { | |
| ret = false; | |
| } | |
| out: | |
| intel_display_power_put(display, encoder->power_domain, wakeref); | |
| return ret; | |
| } | |
| static void intel_ddi_get_encoder_pipes(struct intel_encoder *encoder, | |
| u8 *pipe_mask, bool *is_dp_mst) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| struct ref_tracker *wakeref; | |
| enum pipe p; | |
| u32 tmp; | |
| u8 mst_pipe_mask = 0, dp128b132b_pipe_mask = 0; | |
| *pipe_mask = 0; | |
| *is_dp_mst = false; | |
| wakeref = intel_display_power_get_if_enabled(display, | |
| encoder->power_domain); | |
| if (!wakeref) | |
| return; | |
| tmp = intel_de_read(display, DDI_BUF_CTL(port)); | |
| if (!(tmp & DDI_BUF_CTL_ENABLE)) | |
| goto out; | |
| if (HAS_TRANSCODER(display, TRANSCODER_EDP) && port == PORT_A) { | |
| tmp = intel_de_read(display, | |
| TRANS_DDI_FUNC_CTL(display, TRANSCODER_EDP)); | |
| switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { | |
| default: | |
| MISSING_CASE(tmp & TRANS_DDI_EDP_INPUT_MASK); | |
| fallthrough; | |
| case TRANS_DDI_EDP_INPUT_A_ON: | |
| case TRANS_DDI_EDP_INPUT_A_ONOFF: | |
| *pipe_mask = BIT(PIPE_A); | |
| break; | |
| case TRANS_DDI_EDP_INPUT_B_ONOFF: | |
| *pipe_mask = BIT(PIPE_B); | |
| break; | |
| case TRANS_DDI_EDP_INPUT_C_ONOFF: | |
| *pipe_mask = BIT(PIPE_C); | |
| break; | |
| } | |
| goto out; | |
| } | |
| for_each_pipe(display, p) { | |
| enum transcoder cpu_transcoder = (enum transcoder)p; | |
| u32 port_mask, ddi_select, ddi_mode; | |
| struct ref_tracker *trans_wakeref; | |
| trans_wakeref = intel_display_power_get_if_enabled(display, | |
| POWER_DOMAIN_TRANSCODER(cpu_transcoder)); | |
| if (!trans_wakeref) | |
| continue; | |
| if (DISPLAY_VER(display) >= 12) { | |
| port_mask = TGL_TRANS_DDI_PORT_MASK; | |
| ddi_select = TGL_TRANS_DDI_SELECT_PORT(port); | |
| } else { | |
| port_mask = TRANS_DDI_PORT_MASK; | |
| ddi_select = TRANS_DDI_SELECT_PORT(port); | |
| } | |
| tmp = intel_de_read(display, | |
| TRANS_DDI_FUNC_CTL(display, cpu_transcoder)); | |
| intel_display_power_put(display, POWER_DOMAIN_TRANSCODER(cpu_transcoder), | |
| trans_wakeref); | |
| if ((tmp & port_mask) != ddi_select) | |
| continue; | |
| ddi_mode = tmp & TRANS_DDI_MODE_SELECT_MASK; | |
| if (ddi_mode == TRANS_DDI_MODE_SELECT_DP_MST) | |
| mst_pipe_mask |= BIT(p); | |
| else if (ddi_mode == TRANS_DDI_MODE_SELECT_FDI_OR_128B132B && HAS_DP20(display)) | |
| dp128b132b_pipe_mask |= BIT(p); | |
| *pipe_mask |= BIT(p); | |
| } | |
| if (!*pipe_mask) | |
| drm_dbg_kms(display->drm, | |
| "No pipe for [ENCODER:%d:%s] found\n", | |
| encoder->base.base.id, encoder->base.name); | |
| if (!mst_pipe_mask && dp128b132b_pipe_mask) { | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| /* | |
| * If we don't have 8b/10b MST, but have more than one | |
| * transcoder in 128b/132b mode, we know it must be 128b/132b | |
| * MST. | |
| * | |
| * Otherwise, we fall back to checking the current MST | |
| * state. It's not accurate for hardware takeover at probe, but | |
| * we don't expect MST to have been enabled at that point, and | |
| * can assume it's SST. | |
| */ | |
| if (hweight8(dp128b132b_pipe_mask) > 1 || | |
| intel_dp_mst_active_streams(intel_dp)) | |
| mst_pipe_mask = dp128b132b_pipe_mask; | |
| } | |
| if (!mst_pipe_mask && hweight8(*pipe_mask) > 1) { | |
| drm_dbg_kms(display->drm, | |
| "Multiple pipes for [ENCODER:%d:%s] (pipe_mask %02x)\n", | |
| encoder->base.base.id, encoder->base.name, | |
| *pipe_mask); | |
| *pipe_mask = BIT(ffs(*pipe_mask) - 1); | |
| } | |
| if (mst_pipe_mask && mst_pipe_mask != *pipe_mask) | |
| drm_dbg_kms(display->drm, | |
| "Conflicting MST and non-MST state for [ENCODER:%d:%s] (pipe masks: all %02x, MST %02x, 128b/132b %02x)\n", | |
| encoder->base.base.id, encoder->base.name, | |
| *pipe_mask, mst_pipe_mask, dp128b132b_pipe_mask); | |
| else | |
| *is_dp_mst = mst_pipe_mask; | |
| out: | |
| if (*pipe_mask && (display->platform.geminilake || display->platform.broxton)) { | |
| tmp = intel_de_read(display, BXT_PHY_CTL(port)); | |
| if ((tmp & (BXT_PHY_CMNLANE_POWERDOWN_ACK | | |
| BXT_PHY_LANE_POWERDOWN_ACK | | |
| BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED) | |
| drm_err(display->drm, | |
| "[ENCODER:%d:%s] enabled but PHY powered down? (PHY_CTL %08x)\n", | |
| encoder->base.base.id, encoder->base.name, tmp); | |
| } | |
| intel_display_power_put(display, encoder->power_domain, wakeref); | |
| } | |
| bool intel_ddi_get_hw_state(struct intel_encoder *encoder, | |
| enum pipe *pipe) | |
| { | |
| u8 pipe_mask; | |
| bool is_mst; | |
| intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst); | |
| if (is_mst || !pipe_mask) | |
| return false; | |
| *pipe = ffs(pipe_mask) - 1; | |
| return true; | |
| } | |
| static enum intel_display_power_domain | |
| intel_ddi_main_link_aux_domain(struct intel_digital_port *dig_port, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(dig_port); | |
| /* | |
| * ICL+ HW requires corresponding AUX IOs to be powered up for PSR with | |
| * DC states enabled at the same time, while for driver initiated AUX | |
| * transfers we need the same AUX IOs to be powered but with DC states | |
| * disabled. Accordingly use the AUX_IO_<port> power domain here which | |
| * leaves DC states enabled. | |
| * | |
| * Before MTL TypeC PHYs (in all TypeC modes and both DP/HDMI) also require | |
| * AUX IO to be enabled, but all these require DC_OFF to be enabled as | |
| * well, so we can acquire a wider AUX_<port> power domain reference | |
| * instead of a specific AUX_IO_<port> reference without powering up any | |
| * extra wells. | |
| */ | |
| if (intel_psr_needs_aux_io_power(&dig_port->base, crtc_state)) | |
| return intel_display_power_aux_io_domain(display, dig_port->aux_ch); | |
| else if (DISPLAY_VER(display) < 14 && | |
| (intel_crtc_has_dp_encoder(crtc_state) || | |
| intel_encoder_is_tc(&dig_port->base))) | |
| return intel_aux_power_domain(dig_port); | |
| else | |
| return POWER_DOMAIN_INVALID; | |
| } | |
| static void | |
| main_link_aux_power_domain_get(struct intel_digital_port *dig_port, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(dig_port); | |
| enum intel_display_power_domain domain = | |
| intel_ddi_main_link_aux_domain(dig_port, crtc_state); | |
| drm_WARN_ON(display->drm, dig_port->aux_wakeref); | |
| if (domain == POWER_DOMAIN_INVALID) | |
| return; | |
| dig_port->aux_wakeref = intel_display_power_get(display, domain); | |
| } | |
| static void | |
| main_link_aux_power_domain_put(struct intel_digital_port *dig_port, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(dig_port); | |
| enum intel_display_power_domain domain = | |
| intel_ddi_main_link_aux_domain(dig_port, crtc_state); | |
| struct ref_tracker *wf; | |
| wf = fetch_and_zero(&dig_port->aux_wakeref); | |
| if (!wf) | |
| return; | |
| intel_display_power_put(display, domain, wf); | |
| } | |
| static void intel_ddi_get_power_domains(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port; | |
| /* | |
| * TODO: Add support for MST encoders. Atm, the following should never | |
| * happen since fake-MST encoders don't set their get_power_domains() | |
| * hook. | |
| */ | |
| if (drm_WARN_ON(display->drm, | |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST))) | |
| return; | |
| dig_port = enc_to_dig_port(encoder); | |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) { | |
| drm_WARN_ON(display->drm, dig_port->ddi_io_wakeref); | |
| dig_port->ddi_io_wakeref = intel_display_power_get(display, | |
| dig_port->ddi_io_power_domain); | |
| } | |
| main_link_aux_power_domain_get(dig_port, crtc_state); | |
| } | |
| void intel_ddi_enable_transcoder_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| u32 val; | |
| if (cpu_transcoder == TRANSCODER_EDP) | |
| return; | |
| if (DISPLAY_VER(display) >= 13) | |
| val = TGL_TRANS_CLK_SEL_PORT(phy); | |
| else if (DISPLAY_VER(display) >= 12) | |
| val = TGL_TRANS_CLK_SEL_PORT(encoder->port); | |
| else | |
| val = TRANS_CLK_SEL_PORT(encoder->port); | |
| intel_de_write(display, TRANS_CLK_SEL(cpu_transcoder), val); | |
| } | |
| void intel_ddi_disable_transcoder_clock(const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| u32 val; | |
| if (cpu_transcoder == TRANSCODER_EDP) | |
| return; | |
| if (DISPLAY_VER(display) >= 12) | |
| val = TGL_TRANS_CLK_SEL_DISABLED; | |
| else | |
| val = TRANS_CLK_SEL_DISABLED; | |
| intel_de_write(display, TRANS_CLK_SEL(cpu_transcoder), val); | |
| } | |
| static void _skl_ddi_set_iboost(struct intel_display *display, | |
| enum port port, u8 iboost) | |
| { | |
| u32 tmp; | |
| tmp = intel_de_read(display, DISPIO_CR_TX_BMU_CR0); | |
| tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port)); | |
| if (iboost) | |
| tmp |= iboost << BALANCE_LEG_SHIFT(port); | |
| else | |
| tmp |= BALANCE_LEG_DISABLE(port); | |
| intel_de_write(display, DISPIO_CR_TX_BMU_CR0, tmp); | |
| } | |
| static void skl_ddi_set_iboost(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| int level) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| u8 iboost; | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) | |
| iboost = intel_bios_hdmi_boost_level(encoder->devdata); | |
| else | |
| iboost = intel_bios_dp_boost_level(encoder->devdata); | |
| if (iboost == 0) { | |
| const struct intel_ddi_buf_trans *trans; | |
| int n_entries; | |
| trans = intel_ddi_buf_trans_get(encoder, crtc_state, &n_entries); | |
| if (drm_WARN_ON_ONCE(display->drm, !trans)) | |
| return; | |
| iboost = trans->entries[level].hsw.i_boost; | |
| } | |
| /* Make sure that the requested I_boost is valid */ | |
| if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) { | |
| drm_err(display->drm, "Invalid I_boost value %u\n", iboost); | |
| return; | |
| } | |
| _skl_ddi_set_iboost(display, encoder->port, iboost); | |
| if (encoder->port == PORT_A && dig_port->max_lanes == 4) | |
| _skl_ddi_set_iboost(display, PORT_E, iboost); | |
| } | |
| static u8 intel_ddi_dp_voltage_max(struct intel_dp *intel_dp, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(intel_dp); | |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; | |
| int n_entries; | |
| intel_ddi_buf_trans_get(encoder, crtc_state, &n_entries); | |
| if (drm_WARN_ON(display->drm, n_entries < 1)) | |
| n_entries = 1; | |
| if (drm_WARN_ON(display->drm, | |
| n_entries > ARRAY_SIZE(index_to_dp_signal_levels))) | |
| n_entries = ARRAY_SIZE(index_to_dp_signal_levels); | |
| return index_to_dp_signal_levels[n_entries - 1] & | |
| DP_TRAIN_VOLTAGE_SWING_MASK; | |
| } | |
| /* | |
| * We assume that the full set of pre-emphasis values can be | |
| * used on all DDI platforms. Should that change we need to | |
| * rethink this code. | |
| */ | |
| static u8 intel_ddi_dp_preemph_max(struct intel_dp *intel_dp) | |
| { | |
| return DP_TRAIN_PRE_EMPH_LEVEL_3; | |
| } | |
| static u32 icl_combo_phy_loadgen_select(const struct intel_crtc_state *crtc_state, | |
| int lane) | |
| { | |
| if (crtc_state->port_clock > 600000) | |
| return 0; | |
| if (crtc_state->lane_count == 4) | |
| return lane >= 1 ? LOADGEN_SELECT : 0; | |
| else | |
| return lane == 1 || lane == 2 ? LOADGEN_SELECT : 0; | |
| } | |
| static void icl_ddi_combo_vswing_program(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_ddi_buf_trans *trans; | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| int n_entries, ln; | |
| u32 val; | |
| trans = intel_ddi_buf_trans_get(encoder, crtc_state, &n_entries); | |
| if (drm_WARN_ON_ONCE(display->drm, !trans)) | |
| return; | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP)) { | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| val = EDP4K2K_MODE_OVRD_EN | EDP4K2K_MODE_OVRD_OPTIMIZED; | |
| intel_dp->hobl_active = is_hobl_buf_trans(trans); | |
| intel_de_rmw(display, ICL_PORT_CL_DW10(phy), val, | |
| intel_dp->hobl_active ? val : 0); | |
| } | |
| /* Set PORT_TX_DW5 */ | |
| val = intel_de_read(display, ICL_PORT_TX_DW5_LN(0, phy)); | |
| val &= ~(SCALING_MODE_SEL_MASK | RTERM_SELECT_MASK | | |
| COEFF_POLARITY | CURSOR_PROGRAM | | |
| TAP2_DISABLE | TAP3_DISABLE); | |
| val |= SCALING_MODE_SEL(0x2); | |
| val |= RTERM_SELECT(0x6); | |
| val |= TAP3_DISABLE; | |
| intel_de_write(display, ICL_PORT_TX_DW5_GRP(phy), val); | |
| /* Program PORT_TX_DW2 */ | |
| for (ln = 0; ln < 4; ln++) { | |
| int level = intel_ddi_level(encoder, crtc_state, ln); | |
| intel_de_rmw(display, ICL_PORT_TX_DW2_LN(ln, phy), | |
| SWING_SEL_UPPER_MASK | SWING_SEL_LOWER_MASK | RCOMP_SCALAR_MASK, | |
| SWING_SEL_UPPER(trans->entries[level].icl.dw2_swing_sel) | | |
| SWING_SEL_LOWER(trans->entries[level].icl.dw2_swing_sel) | | |
| RCOMP_SCALAR(0x98)); | |
| } | |
| /* Program PORT_TX_DW4 */ | |
| /* We cannot write to GRP. It would overwrite individual loadgen. */ | |
| for (ln = 0; ln < 4; ln++) { | |
| int level = intel_ddi_level(encoder, crtc_state, ln); | |
| intel_de_rmw(display, ICL_PORT_TX_DW4_LN(ln, phy), | |
| POST_CURSOR_1_MASK | POST_CURSOR_2_MASK | CURSOR_COEFF_MASK, | |
| POST_CURSOR_1(trans->entries[level].icl.dw4_post_cursor_1) | | |
| POST_CURSOR_2(trans->entries[level].icl.dw4_post_cursor_2) | | |
| CURSOR_COEFF(trans->entries[level].icl.dw4_cursor_coeff)); | |
| } | |
| /* Program PORT_TX_DW7 */ | |
| for (ln = 0; ln < 4; ln++) { | |
| int level = intel_ddi_level(encoder, crtc_state, ln); | |
| intel_de_rmw(display, ICL_PORT_TX_DW7_LN(ln, phy), | |
| N_SCALAR_MASK, | |
| N_SCALAR(trans->entries[level].icl.dw7_n_scalar)); | |
| } | |
| } | |
| static void icl_combo_phy_set_signal_levels(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| u32 val; | |
| int ln; | |
| /* | |
| * 1. If port type is eDP or DP, | |
| * set PORT_PCS_DW1 cmnkeeper_enable to 1b, | |
| * else clear to 0b. | |
| */ | |
| val = intel_de_read(display, ICL_PORT_PCS_DW1_LN(0, phy)); | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) | |
| val &= ~COMMON_KEEPER_EN; | |
| else | |
| val |= COMMON_KEEPER_EN; | |
| intel_de_write(display, ICL_PORT_PCS_DW1_GRP(phy), val); | |
| /* 2. Program loadgen select */ | |
| /* | |
| * Program PORT_TX_DW4 depending on Bit rate and used lanes | |
| * <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1) | |
| * <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0) | |
| * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0) | |
| */ | |
| for (ln = 0; ln < 4; ln++) { | |
| intel_de_rmw(display, ICL_PORT_TX_DW4_LN(ln, phy), | |
| LOADGEN_SELECT, | |
| icl_combo_phy_loadgen_select(crtc_state, ln)); | |
| } | |
| /* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */ | |
| intel_de_rmw(display, ICL_PORT_CL_DW5(phy), | |
| 0, SUS_CLOCK_CONFIG); | |
| /* 4. Clear training enable to change swing values */ | |
| val = intel_de_read(display, ICL_PORT_TX_DW5_LN(0, phy)); | |
| val &= ~TX_TRAINING_EN; | |
| intel_de_write(display, ICL_PORT_TX_DW5_GRP(phy), val); | |
| /* 5. Program swing and de-emphasis */ | |
| icl_ddi_combo_vswing_program(encoder, crtc_state); | |
| /* 6. Set training enable to trigger update */ | |
| val = intel_de_read(display, ICL_PORT_TX_DW5_LN(0, phy)); | |
| val |= TX_TRAINING_EN; | |
| intel_de_write(display, ICL_PORT_TX_DW5_GRP(phy), val); | |
| } | |
| static void icl_mg_phy_set_signal_levels(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum tc_port tc_port = intel_encoder_to_tc(encoder); | |
| const struct intel_ddi_buf_trans *trans; | |
| int n_entries, ln; | |
| if (intel_tc_port_in_tbt_alt_mode(enc_to_dig_port(encoder))) | |
| return; | |
| trans = intel_ddi_buf_trans_get(encoder, crtc_state, &n_entries); | |
| if (drm_WARN_ON_ONCE(display->drm, !trans)) | |
| return; | |
| for (ln = 0; ln < 2; ln++) { | |
| intel_de_rmw(display, MG_TX1_LINK_PARAMS(ln, tc_port), | |
| CRI_USE_FS32, 0); | |
| intel_de_rmw(display, MG_TX2_LINK_PARAMS(ln, tc_port), | |
| CRI_USE_FS32, 0); | |
| } | |
| /* Program MG_TX_SWINGCTRL with values from vswing table */ | |
| for (ln = 0; ln < 2; ln++) { | |
| int level; | |
| level = intel_ddi_level(encoder, crtc_state, 2*ln+0); | |
| intel_de_rmw(display, MG_TX1_SWINGCTRL(ln, tc_port), | |
| CRI_TXDEEMPH_OVERRIDE_17_12_MASK, | |
| CRI_TXDEEMPH_OVERRIDE_17_12(trans->entries[level].mg.cri_txdeemph_override_17_12)); | |
| level = intel_ddi_level(encoder, crtc_state, 2*ln+1); | |
| intel_de_rmw(display, MG_TX2_SWINGCTRL(ln, tc_port), | |
| CRI_TXDEEMPH_OVERRIDE_17_12_MASK, | |
| CRI_TXDEEMPH_OVERRIDE_17_12(trans->entries[level].mg.cri_txdeemph_override_17_12)); | |
| } | |
| /* Program MG_TX_DRVCTRL with values from vswing table */ | |
| for (ln = 0; ln < 2; ln++) { | |
| int level; | |
| level = intel_ddi_level(encoder, crtc_state, 2*ln+0); | |
| intel_de_rmw(display, MG_TX1_DRVCTRL(ln, tc_port), | |
| CRI_TXDEEMPH_OVERRIDE_11_6_MASK | | |
| CRI_TXDEEMPH_OVERRIDE_5_0_MASK, | |
| CRI_TXDEEMPH_OVERRIDE_11_6(trans->entries[level].mg.cri_txdeemph_override_11_6) | | |
| CRI_TXDEEMPH_OVERRIDE_5_0(trans->entries[level].mg.cri_txdeemph_override_5_0) | | |
| CRI_TXDEEMPH_OVERRIDE_EN); | |
| level = intel_ddi_level(encoder, crtc_state, 2*ln+1); | |
| intel_de_rmw(display, MG_TX2_DRVCTRL(ln, tc_port), | |
| CRI_TXDEEMPH_OVERRIDE_11_6_MASK | | |
| CRI_TXDEEMPH_OVERRIDE_5_0_MASK, | |
| CRI_TXDEEMPH_OVERRIDE_11_6(trans->entries[level].mg.cri_txdeemph_override_11_6) | | |
| CRI_TXDEEMPH_OVERRIDE_5_0(trans->entries[level].mg.cri_txdeemph_override_5_0) | | |
| CRI_TXDEEMPH_OVERRIDE_EN); | |
| /* FIXME: Program CRI_LOADGEN_SEL after the spec is updated */ | |
| } | |
| /* | |
| * Program MG_CLKHUB<LN, port being used> with value from frequency table | |
| * In case of Legacy mode on MG PHY, both TX1 and TX2 enabled so use the | |
| * values from table for which TX1 and TX2 enabled. | |
| */ | |
| for (ln = 0; ln < 2; ln++) { | |
| intel_de_rmw(display, MG_CLKHUB(ln, tc_port), | |
| CFG_LOW_RATE_LKREN_EN, | |
| crtc_state->port_clock < 300000 ? CFG_LOW_RATE_LKREN_EN : 0); | |
| } | |
| /* Program the MG_TX_DCC<LN, port being used> based on the link frequency */ | |
| for (ln = 0; ln < 2; ln++) { | |
| intel_de_rmw(display, MG_TX1_DCC(ln, tc_port), | |
| CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK | | |
| CFG_AMI_CK_DIV_OVERRIDE_EN, | |
| crtc_state->port_clock > 500000 ? | |
| CFG_AMI_CK_DIV_OVERRIDE_VAL(1) | | |
| CFG_AMI_CK_DIV_OVERRIDE_EN : 0); | |
| intel_de_rmw(display, MG_TX2_DCC(ln, tc_port), | |
| CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK | | |
| CFG_AMI_CK_DIV_OVERRIDE_EN, | |
| crtc_state->port_clock > 500000 ? | |
| CFG_AMI_CK_DIV_OVERRIDE_VAL(1) | | |
| CFG_AMI_CK_DIV_OVERRIDE_EN : 0); | |
| } | |
| /* Program MG_TX_PISO_READLOAD with values from vswing table */ | |
| for (ln = 0; ln < 2; ln++) { | |
| intel_de_rmw(display, MG_TX1_PISO_READLOAD(ln, tc_port), | |
| 0, CRI_CALCINIT); | |
| intel_de_rmw(display, MG_TX2_PISO_READLOAD(ln, tc_port), | |
| 0, CRI_CALCINIT); | |
| } | |
| } | |
| static void tgl_dkl_phy_set_signal_levels(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum tc_port tc_port = intel_encoder_to_tc(encoder); | |
| const struct intel_ddi_buf_trans *trans; | |
| int n_entries, ln; | |
| if (intel_tc_port_in_tbt_alt_mode(enc_to_dig_port(encoder))) | |
| return; | |
| trans = intel_ddi_buf_trans_get(encoder, crtc_state, &n_entries); | |
| if (drm_WARN_ON_ONCE(display->drm, !trans)) | |
| return; | |
| for (ln = 0; ln < 2; ln++) { | |
| int level; | |
| /* Wa_16011342517:adl-p */ | |
| if (intel_display_wa(display, INTEL_DISPLAY_WA_16011342517)) { | |
| if ((intel_encoder_is_hdmi(encoder) && | |
| crtc_state->port_clock == 594000) || | |
| (intel_encoder_is_dp(encoder) && | |
| crtc_state->port_clock == 162000)) { | |
| intel_dkl_phy_rmw(display, DKL_TX_DPCNTL2(tc_port, ln), | |
| LOADGEN_SHARING_PMD_DISABLE, 1); | |
| } else { | |
| intel_dkl_phy_rmw(display, DKL_TX_DPCNTL2(tc_port, ln), | |
| LOADGEN_SHARING_PMD_DISABLE, 0); | |
| } | |
| } | |
| intel_dkl_phy_write(display, DKL_TX_PMD_LANE_SUS(tc_port, ln), 0); | |
| level = intel_ddi_level(encoder, crtc_state, 2*ln+0); | |
| intel_dkl_phy_rmw(display, DKL_TX_DPCNTL0(tc_port, ln), | |
| DKL_TX_PRESHOOT_COEFF_MASK | | |
| DKL_TX_DE_EMPAHSIS_COEFF_MASK | | |
| DKL_TX_VSWING_CONTROL_MASK, | |
| DKL_TX_PRESHOOT_COEFF(trans->entries[level].dkl.preshoot) | | |
| DKL_TX_DE_EMPHASIS_COEFF(trans->entries[level].dkl.de_emphasis) | | |
| DKL_TX_VSWING_CONTROL(trans->entries[level].dkl.vswing)); | |
| level = intel_ddi_level(encoder, crtc_state, 2*ln+1); | |
| intel_dkl_phy_rmw(display, DKL_TX_DPCNTL1(tc_port, ln), | |
| DKL_TX_PRESHOOT_COEFF_MASK | | |
| DKL_TX_DE_EMPAHSIS_COEFF_MASK | | |
| DKL_TX_VSWING_CONTROL_MASK, | |
| DKL_TX_PRESHOOT_COEFF(trans->entries[level].dkl.preshoot) | | |
| DKL_TX_DE_EMPHASIS_COEFF(trans->entries[level].dkl.de_emphasis) | | |
| DKL_TX_VSWING_CONTROL(trans->entries[level].dkl.vswing)); | |
| intel_dkl_phy_rmw(display, DKL_TX_DPCNTL2(tc_port, ln), | |
| DKL_TX_DP20BITMODE, 0); | |
| if (display->platform.alderlake_p) { | |
| u32 val; | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { | |
| if (ln == 0) { | |
| val = DKL_TX_DPCNTL2_CFG_LOADGENSELECT_TX1(0); | |
| val |= DKL_TX_DPCNTL2_CFG_LOADGENSELECT_TX2(2); | |
| } else { | |
| val = DKL_TX_DPCNTL2_CFG_LOADGENSELECT_TX1(3); | |
| val |= DKL_TX_DPCNTL2_CFG_LOADGENSELECT_TX2(3); | |
| } | |
| } else { | |
| val = DKL_TX_DPCNTL2_CFG_LOADGENSELECT_TX1(0); | |
| val |= DKL_TX_DPCNTL2_CFG_LOADGENSELECT_TX2(0); | |
| } | |
| intel_dkl_phy_rmw(display, DKL_TX_DPCNTL2(tc_port, ln), | |
| DKL_TX_DPCNTL2_CFG_LOADGENSELECT_TX1_MASK | | |
| DKL_TX_DPCNTL2_CFG_LOADGENSELECT_TX2_MASK, | |
| val); | |
| } | |
| } | |
| } | |
| static int translate_signal_level(struct intel_dp *intel_dp, | |
| u8 signal_levels) | |
| { | |
| struct intel_display *display = to_intel_display(intel_dp); | |
| const u8 *signal_array; | |
| size_t array_size; | |
| int i; | |
| signal_array = index_to_dp_signal_levels; | |
| array_size = ARRAY_SIZE(index_to_dp_signal_levels); | |
| for (i = 0; i < array_size; i++) { | |
| if (signal_array[i] == signal_levels) | |
| return i; | |
| } | |
| drm_WARN(display->drm, 1, | |
| "Unsupported voltage swing/pre-emphasis level: 0x%x\n", | |
| signal_levels); | |
| return 0; | |
| } | |
| static int intel_ddi_dp_level(struct intel_dp *intel_dp, | |
| const struct intel_crtc_state *crtc_state, | |
| int lane) | |
| { | |
| u8 train_set = intel_dp->train_set[lane]; | |
| if (intel_dp_is_uhbr(crtc_state)) { | |
| return train_set & DP_TX_FFE_PRESET_VALUE_MASK; | |
| } else { | |
| u8 signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | | |
| DP_TRAIN_PRE_EMPHASIS_MASK); | |
| return translate_signal_level(intel_dp, signal_levels); | |
| } | |
| } | |
| int intel_ddi_level(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| int lane) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_ddi_buf_trans *trans; | |
| int level, n_entries; | |
| trans = intel_ddi_buf_trans_get(encoder, crtc_state, &n_entries); | |
| if (drm_WARN_ON_ONCE(display->drm, !trans)) | |
| return 0; | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) | |
| level = intel_ddi_hdmi_level(encoder, trans); | |
| else | |
| level = intel_ddi_dp_level(enc_to_intel_dp(encoder), crtc_state, | |
| lane); | |
| if (drm_WARN_ON_ONCE(display->drm, level >= n_entries)) | |
| level = n_entries - 1; | |
| return level; | |
| } | |
| int intel_ddi_link_symbol_clock(struct intel_encoder *encoder, int clock) | |
| { | |
| if (intel_encoder_is_dp(encoder)) | |
| return intel_dp_link_symbol_clock(clock); | |
| if (intel_hdmi_is_frl(clock)) | |
| return DIV_ROUND_CLOSEST(clock * 10, 18); | |
| return clock; | |
| } | |
| static void | |
| hsw_set_signal_levels(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| int level = intel_ddi_level(encoder, crtc_state, 0); | |
| enum port port = encoder->port; | |
| u32 signal_levels; | |
| if (has_iboost(display)) | |
| skl_ddi_set_iboost(encoder, crtc_state, level); | |
| /* HDMI ignores the rest */ | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) | |
| return; | |
| signal_levels = DDI_BUF_TRANS_SELECT(level); | |
| drm_dbg_kms(display->drm, "Using signal levels %08x\n", | |
| signal_levels); | |
| intel_dp->DP &= ~DDI_BUF_EMP_MASK; | |
| intel_dp->DP |= signal_levels; | |
| intel_de_write(display, DDI_BUF_CTL(port), intel_dp->DP); | |
| intel_de_posting_read(display, DDI_BUF_CTL(port)); | |
| } | |
| static void _icl_ddi_enable_clock(struct intel_display *display, intel_reg_t reg, | |
| u32 clk_sel_mask, u32 clk_sel, u32 clk_off) | |
| { | |
| mutex_lock(&display->dpll.lock); | |
| intel_de_rmw(display, reg, clk_sel_mask, clk_sel); | |
| /* | |
| * "This step and the step before must be | |
| * done with separate register writes." | |
| */ | |
| intel_de_rmw(display, reg, clk_off, 0); | |
| mutex_unlock(&display->dpll.lock); | |
| } | |
| static void _icl_ddi_disable_clock(struct intel_display *display, intel_reg_t reg, | |
| u32 clk_off) | |
| { | |
| mutex_lock(&display->dpll.lock); | |
| intel_de_rmw(display, reg, 0, clk_off); | |
| mutex_unlock(&display->dpll.lock); | |
| } | |
| static bool _icl_ddi_is_clock_enabled(struct intel_display *display, intel_reg_t reg, | |
| u32 clk_off) | |
| { | |
| return !(intel_de_read(display, reg) & clk_off); | |
| } | |
| static struct intel_dpll * | |
| _icl_ddi_get_pll(struct intel_display *display, intel_reg_t reg, | |
| u32 clk_sel_mask, u32 clk_sel_shift) | |
| { | |
| enum intel_dpll_id id; | |
| id = (intel_de_read(display, reg) & clk_sel_mask) >> clk_sel_shift; | |
| return intel_get_dpll_by_id(display, id); | |
| } | |
| static void adls_ddi_enable_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| _icl_ddi_enable_clock(display, ADLS_DPCLKA_CFGCR(phy), | |
| ADLS_DPCLKA_CFGCR_DDI_CLK_SEL_MASK(phy), | |
| pll->info->id << ADLS_DPCLKA_CFGCR_DDI_SHIFT(phy), | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static void adls_ddi_disable_clock(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| _icl_ddi_disable_clock(display, ADLS_DPCLKA_CFGCR(phy), | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static bool adls_ddi_is_clock_enabled(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| return _icl_ddi_is_clock_enabled(display, ADLS_DPCLKA_CFGCR(phy), | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static struct intel_dpll *adls_ddi_get_pll(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| return _icl_ddi_get_pll(display, ADLS_DPCLKA_CFGCR(phy), | |
| ADLS_DPCLKA_CFGCR_DDI_CLK_SEL_MASK(phy), | |
| ADLS_DPCLKA_CFGCR_DDI_SHIFT(phy)); | |
| } | |
| static void rkl_ddi_enable_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| _icl_ddi_enable_clock(display, ICL_DPCLKA_CFGCR0, | |
| RKL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), | |
| RKL_DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, phy), | |
| RKL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static void rkl_ddi_disable_clock(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| _icl_ddi_disable_clock(display, ICL_DPCLKA_CFGCR0, | |
| RKL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static bool rkl_ddi_is_clock_enabled(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| return _icl_ddi_is_clock_enabled(display, ICL_DPCLKA_CFGCR0, | |
| RKL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static struct intel_dpll *rkl_ddi_get_pll(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| return _icl_ddi_get_pll(display, ICL_DPCLKA_CFGCR0, | |
| RKL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), | |
| RKL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy)); | |
| } | |
| static void dg1_ddi_enable_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| /* | |
| * If we fail this, something went very wrong: first 2 PLLs should be | |
| * used by first 2 phys and last 2 PLLs by last phys | |
| */ | |
| if (drm_WARN_ON(display->drm, | |
| (pll->info->id < DPLL_ID_DG1_DPLL2 && phy >= PHY_C) || | |
| (pll->info->id >= DPLL_ID_DG1_DPLL2 && phy < PHY_C))) | |
| return; | |
| _icl_ddi_enable_clock(display, DG1_DPCLKA_CFGCR0(phy), | |
| DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), | |
| DG1_DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, phy), | |
| DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static void dg1_ddi_disable_clock(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| _icl_ddi_disable_clock(display, DG1_DPCLKA_CFGCR0(phy), | |
| DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static bool dg1_ddi_is_clock_enabled(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| return _icl_ddi_is_clock_enabled(display, DG1_DPCLKA_CFGCR0(phy), | |
| DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static struct intel_dpll *dg1_ddi_get_pll(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| enum intel_dpll_id id; | |
| u32 val; | |
| val = intel_de_read(display, DG1_DPCLKA_CFGCR0(phy)); | |
| val &= DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy); | |
| val >>= DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy); | |
| id = val; | |
| /* | |
| * _DG1_DPCLKA0_CFGCR0 maps between DPLL 0 and 1 with one bit for phy A | |
| * and B while _DG1_DPCLKA1_CFGCR0 maps between DPLL 2 and 3 with one | |
| * bit for phy C and D. | |
| */ | |
| if (phy >= PHY_C) | |
| id += DPLL_ID_DG1_DPLL2; | |
| return intel_get_dpll_by_id(display, id); | |
| } | |
| static void icl_ddi_combo_enable_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| _icl_ddi_enable_clock(display, ICL_DPCLKA_CFGCR0, | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, phy), | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static void icl_ddi_combo_disable_clock(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| _icl_ddi_disable_clock(display, ICL_DPCLKA_CFGCR0, | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| static bool icl_ddi_combo_is_clock_enabled(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| return _icl_ddi_is_clock_enabled(display, ICL_DPCLKA_CFGCR0, | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)); | |
| } | |
| struct intel_dpll *icl_ddi_combo_get_pll(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| return _icl_ddi_get_pll(display, ICL_DPCLKA_CFGCR0, | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy), | |
| ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy)); | |
| } | |
| static void jsl_ddi_tc_enable_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| enum port port = encoder->port; | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| /* | |
| * "For DDIC and DDID, program DDI_CLK_SEL to map the MG clock to the port. | |
| * MG does not exist, but the programming is required to ungate DDIC and DDID." | |
| */ | |
| intel_de_write(display, DDI_CLK_SEL(port), DDI_CLK_SEL_MG); | |
| icl_ddi_combo_enable_clock(encoder, crtc_state); | |
| } | |
| static void jsl_ddi_tc_disable_clock(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| icl_ddi_combo_disable_clock(encoder); | |
| intel_de_write(display, DDI_CLK_SEL(port), DDI_CLK_SEL_NONE); | |
| } | |
| static bool jsl_ddi_tc_is_clock_enabled(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| u32 tmp; | |
| tmp = intel_de_read(display, DDI_CLK_SEL(port)); | |
| if ((tmp & DDI_CLK_SEL_MASK) == DDI_CLK_SEL_NONE) | |
| return false; | |
| return icl_ddi_combo_is_clock_enabled(encoder); | |
| } | |
| static void icl_ddi_tc_enable_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| enum tc_port tc_port = intel_encoder_to_tc(encoder); | |
| enum port port = encoder->port; | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| intel_de_write(display, DDI_CLK_SEL(port), | |
| icl_pll_to_ddi_clk_sel(encoder, crtc_state)); | |
| mutex_lock(&display->dpll.lock); | |
| intel_de_rmw(display, ICL_DPCLKA_CFGCR0, | |
| ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port), 0); | |
| mutex_unlock(&display->dpll.lock); | |
| } | |
| static void icl_ddi_tc_disable_clock(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum tc_port tc_port = intel_encoder_to_tc(encoder); | |
| enum port port = encoder->port; | |
| mutex_lock(&display->dpll.lock); | |
| intel_de_rmw(display, ICL_DPCLKA_CFGCR0, | |
| 0, ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port)); | |
| mutex_unlock(&display->dpll.lock); | |
| intel_de_write(display, DDI_CLK_SEL(port), DDI_CLK_SEL_NONE); | |
| } | |
| static bool icl_ddi_tc_is_clock_enabled(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum tc_port tc_port = intel_encoder_to_tc(encoder); | |
| enum port port = encoder->port; | |
| u32 tmp; | |
| tmp = intel_de_read(display, DDI_CLK_SEL(port)); | |
| if ((tmp & DDI_CLK_SEL_MASK) == DDI_CLK_SEL_NONE) | |
| return false; | |
| tmp = intel_de_read(display, ICL_DPCLKA_CFGCR0); | |
| return !(tmp & ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port)); | |
| } | |
| static struct intel_dpll *icl_ddi_tc_get_pll(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum tc_port tc_port = intel_encoder_to_tc(encoder); | |
| enum port port = encoder->port; | |
| enum intel_dpll_id id; | |
| u32 tmp; | |
| tmp = intel_de_read(display, DDI_CLK_SEL(port)); | |
| switch (tmp & DDI_CLK_SEL_MASK) { | |
| case DDI_CLK_SEL_TBT_162: | |
| case DDI_CLK_SEL_TBT_270: | |
| case DDI_CLK_SEL_TBT_540: | |
| case DDI_CLK_SEL_TBT_810: | |
| id = DPLL_ID_ICL_TBTPLL; | |
| break; | |
| case DDI_CLK_SEL_MG: | |
| id = icl_tc_port_to_pll_id(tc_port); | |
| break; | |
| default: | |
| MISSING_CASE(tmp); | |
| fallthrough; | |
| case DDI_CLK_SEL_NONE: | |
| return NULL; | |
| } | |
| return intel_get_dpll_by_id(display, id); | |
| } | |
| static struct intel_dpll *bxt_ddi_get_pll(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder->base.dev); | |
| enum intel_dpll_id id; | |
| switch (encoder->port) { | |
| case PORT_A: | |
| id = DPLL_ID_SKL_DPLL0; | |
| break; | |
| case PORT_B: | |
| id = DPLL_ID_SKL_DPLL1; | |
| break; | |
| case PORT_C: | |
| id = DPLL_ID_SKL_DPLL2; | |
| break; | |
| default: | |
| MISSING_CASE(encoder->port); | |
| return NULL; | |
| } | |
| return intel_get_dpll_by_id(display, id); | |
| } | |
| static void skl_ddi_enable_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| enum port port = encoder->port; | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| mutex_lock(&display->dpll.lock); | |
| intel_de_rmw(display, DPLL_CTRL2, | |
| DPLL_CTRL2_DDI_CLK_OFF(port) | | |
| DPLL_CTRL2_DDI_CLK_SEL_MASK(port), | |
| DPLL_CTRL2_DDI_CLK_SEL(pll->info->id, port) | | |
| DPLL_CTRL2_DDI_SEL_OVERRIDE(port)); | |
| mutex_unlock(&display->dpll.lock); | |
| } | |
| static void skl_ddi_disable_clock(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| mutex_lock(&display->dpll.lock); | |
| intel_de_rmw(display, DPLL_CTRL2, | |
| 0, DPLL_CTRL2_DDI_CLK_OFF(port)); | |
| mutex_unlock(&display->dpll.lock); | |
| } | |
| static bool skl_ddi_is_clock_enabled(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| /* | |
| * FIXME Not sure if the override affects both | |
| * the PLL selection and the CLK_OFF bit. | |
| */ | |
| return !(intel_de_read(display, DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_OFF(port)); | |
| } | |
| static struct intel_dpll *skl_ddi_get_pll(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| enum intel_dpll_id id; | |
| u32 tmp; | |
| tmp = intel_de_read(display, DPLL_CTRL2); | |
| /* | |
| * FIXME Not sure if the override affects both | |
| * the PLL selection and the CLK_OFF bit. | |
| */ | |
| if ((tmp & DPLL_CTRL2_DDI_SEL_OVERRIDE(port)) == 0) | |
| return NULL; | |
| id = (tmp & DPLL_CTRL2_DDI_CLK_SEL_MASK(port)) >> | |
| DPLL_CTRL2_DDI_CLK_SEL_SHIFT(port); | |
| return intel_get_dpll_by_id(display, id); | |
| } | |
| void hsw_ddi_enable_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| enum port port = encoder->port; | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| intel_de_write(display, PORT_CLK_SEL(port), hsw_pll_to_ddi_pll_sel(pll)); | |
| } | |
| void hsw_ddi_disable_clock(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| intel_de_write(display, PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); | |
| } | |
| bool hsw_ddi_is_clock_enabled(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| return intel_de_read(display, PORT_CLK_SEL(port)) != PORT_CLK_SEL_NONE; | |
| } | |
| static struct intel_dpll *hsw_ddi_get_pll(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| enum intel_dpll_id id; | |
| u32 tmp; | |
| tmp = intel_de_read(display, PORT_CLK_SEL(port)); | |
| switch (tmp & PORT_CLK_SEL_MASK) { | |
| case PORT_CLK_SEL_WRPLL1: | |
| id = DPLL_ID_WRPLL1; | |
| break; | |
| case PORT_CLK_SEL_WRPLL2: | |
| id = DPLL_ID_WRPLL2; | |
| break; | |
| case PORT_CLK_SEL_SPLL: | |
| id = DPLL_ID_SPLL; | |
| break; | |
| case PORT_CLK_SEL_LCPLL_810: | |
| id = DPLL_ID_LCPLL_810; | |
| break; | |
| case PORT_CLK_SEL_LCPLL_1350: | |
| id = DPLL_ID_LCPLL_1350; | |
| break; | |
| case PORT_CLK_SEL_LCPLL_2700: | |
| id = DPLL_ID_LCPLL_2700; | |
| break; | |
| default: | |
| MISSING_CASE(tmp); | |
| fallthrough; | |
| case PORT_CLK_SEL_NONE: | |
| return NULL; | |
| } | |
| return intel_get_dpll_by_id(display, id); | |
| } | |
| void intel_ddi_enable_clock(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| if (encoder->enable_clock) | |
| encoder->enable_clock(encoder, crtc_state); | |
| } | |
| void intel_ddi_disable_clock(struct intel_encoder *encoder) | |
| { | |
| if (encoder->disable_clock) | |
| encoder->disable_clock(encoder); | |
| } | |
| void intel_ddi_sanitize_encoder_pll_mapping(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| u32 port_mask; | |
| bool ddi_clk_needed; | |
| /* | |
| * In case of DP MST, we sanitize the primary encoder only, not the | |
| * virtual ones. | |
| */ | |
| if (encoder->type == INTEL_OUTPUT_DP_MST) | |
| return; | |
| if (!encoder->base.crtc && intel_encoder_is_dp(encoder)) { | |
| u8 pipe_mask; | |
| bool is_mst; | |
| intel_ddi_get_encoder_pipes(encoder, &pipe_mask, &is_mst); | |
| /* | |
| * In the unlikely case that BIOS enables DP in MST mode, just | |
| * warn since our MST HW readout is incomplete. | |
| */ | |
| if (drm_WARN_ON(display->drm, is_mst)) | |
| return; | |
| } | |
| port_mask = BIT(encoder->port); | |
| ddi_clk_needed = encoder->base.crtc; | |
| if (encoder->type == INTEL_OUTPUT_DSI) { | |
| struct intel_encoder *other_encoder; | |
| port_mask = intel_dsi_encoder_ports(encoder); | |
| /* | |
| * Sanity check that we haven't incorrectly registered another | |
| * encoder using any of the ports of this DSI encoder. | |
| */ | |
| for_each_intel_encoder(display->drm, other_encoder) { | |
| if (other_encoder == encoder) | |
| continue; | |
| if (drm_WARN_ON(display->drm, | |
| port_mask & BIT(other_encoder->port))) | |
| return; | |
| } | |
| /* | |
| * For DSI we keep the ddi clocks gated | |
| * except during enable/disable sequence. | |
| */ | |
| ddi_clk_needed = false; | |
| } | |
| if (ddi_clk_needed || !encoder->is_clock_enabled || | |
| !encoder->is_clock_enabled(encoder)) | |
| return; | |
| drm_dbg_kms(display->drm, | |
| "[ENCODER:%d:%s] is disabled/in DSI mode with an ungated DDI clock, gate it\n", | |
| encoder->base.base.id, encoder->base.name); | |
| encoder->disable_clock(encoder); | |
| } | |
| static void | |
| tgl_dkl_phy_check_and_rewrite(struct intel_display *display, | |
| enum tc_port tc_port, u32 ln0, u32 ln1) | |
| { | |
| if (ln0 != intel_dkl_phy_read(display, DKL_DP_MODE(tc_port, 0))) | |
| intel_dkl_phy_write(display, DKL_DP_MODE(tc_port, 0), ln0); | |
| if (ln1 != intel_dkl_phy_read(display, DKL_DP_MODE(tc_port, 1))) | |
| intel_dkl_phy_write(display, DKL_DP_MODE(tc_port, 1), ln1); | |
| } | |
| static void | |
| icl_program_mg_dp_mode(struct intel_digital_port *dig_port, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| enum tc_port tc_port = intel_encoder_to_tc(&dig_port->base); | |
| enum intel_tc_pin_assignment pin_assignment; | |
| u32 ln0, ln1; | |
| u8 width; | |
| if (DISPLAY_VER(display) >= 14) | |
| return; | |
| if (!intel_encoder_is_tc(&dig_port->base) || | |
| intel_tc_port_in_tbt_alt_mode(dig_port)) | |
| return; | |
| if (DISPLAY_VER(display) >= 12) { | |
| ln0 = intel_dkl_phy_read(display, DKL_DP_MODE(tc_port, 0)); | |
| ln1 = intel_dkl_phy_read(display, DKL_DP_MODE(tc_port, 1)); | |
| } else { | |
| ln0 = intel_de_read(display, MG_DP_MODE(0, tc_port)); | |
| ln1 = intel_de_read(display, MG_DP_MODE(1, tc_port)); | |
| } | |
| ln0 &= ~(MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE); | |
| ln1 &= ~(MG_DP_MODE_CFG_DP_X1_MODE | MG_DP_MODE_CFG_DP_X2_MODE); | |
| /* DPPATC */ | |
| pin_assignment = intel_tc_port_get_pin_assignment(dig_port); | |
| width = crtc_state->lane_count; | |
| switch (pin_assignment) { | |
| case INTEL_TC_PIN_ASSIGNMENT_NONE: | |
| drm_WARN_ON(display->drm, | |
| !intel_tc_port_in_legacy_mode(dig_port)); | |
| if (width == 1) { | |
| ln1 |= MG_DP_MODE_CFG_DP_X1_MODE; | |
| } else { | |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| } | |
| break; | |
| case INTEL_TC_PIN_ASSIGNMENT_A: | |
| if (width == 4) { | |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| } | |
| break; | |
| case INTEL_TC_PIN_ASSIGNMENT_B: | |
| if (width == 2) { | |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| } | |
| break; | |
| case INTEL_TC_PIN_ASSIGNMENT_C: | |
| case INTEL_TC_PIN_ASSIGNMENT_E: | |
| if (width == 1) { | |
| ln0 |= MG_DP_MODE_CFG_DP_X1_MODE; | |
| ln1 |= MG_DP_MODE_CFG_DP_X1_MODE; | |
| } else { | |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| } | |
| break; | |
| case INTEL_TC_PIN_ASSIGNMENT_D: | |
| case INTEL_TC_PIN_ASSIGNMENT_F: | |
| if (width == 1) { | |
| ln0 |= MG_DP_MODE_CFG_DP_X1_MODE; | |
| ln1 |= MG_DP_MODE_CFG_DP_X1_MODE; | |
| } else { | |
| ln0 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| ln1 |= MG_DP_MODE_CFG_DP_X2_MODE; | |
| } | |
| break; | |
| default: | |
| MISSING_CASE(pin_assignment); | |
| } | |
| if (DISPLAY_VER(display) >= 12) { | |
| intel_dkl_phy_write(display, DKL_DP_MODE(tc_port, 0), ln0); | |
| intel_dkl_phy_write(display, DKL_DP_MODE(tc_port, 1), ln1); | |
| /* WA_14018221282 */ | |
| if (IS_DISPLAY_VER(display, 12, 13)) | |
| tgl_dkl_phy_check_and_rewrite(display, tc_port, ln0, ln1); | |
| } else { | |
| intel_de_write(display, MG_DP_MODE(0, tc_port), ln0); | |
| intel_de_write(display, MG_DP_MODE(1, tc_port), ln1); | |
| } | |
| } | |
| static enum transcoder | |
| tgl_dp_tp_transcoder(const struct intel_crtc_state *crtc_state) | |
| { | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) | |
| return crtc_state->mst_master_transcoder; | |
| else | |
| return crtc_state->cpu_transcoder; | |
| } | |
| intel_reg_t dp_tp_ctl_reg(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| if (DISPLAY_VER(display) >= 12) | |
| return TGL_DP_TP_CTL(display, | |
| tgl_dp_tp_transcoder(crtc_state)); | |
| else | |
| return DP_TP_CTL(encoder->port); | |
| } | |
| static intel_reg_t dp_tp_status_reg(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| if (DISPLAY_VER(display) >= 12) | |
| return TGL_DP_TP_STATUS(display, | |
| tgl_dp_tp_transcoder(crtc_state)); | |
| else | |
| return DP_TP_STATUS(encoder->port); | |
| } | |
| void intel_ddi_clear_act_sent(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| intel_de_write(display, dp_tp_status_reg(encoder, crtc_state), | |
| DP_TP_STATUS_ACT_SENT); | |
| } | |
| void intel_ddi_wait_for_act_sent(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| if (intel_de_wait_for_set_ms(display, dp_tp_status_reg(encoder, crtc_state), | |
| DP_TP_STATUS_ACT_SENT, 1)) | |
| drm_err(display->drm, "Timed out waiting for ACT sent\n"); | |
| } | |
| static void intel_dp_sink_set_msa_timing_par_ignore_state(struct intel_dp *intel_dp, | |
| const struct intel_crtc_state *crtc_state, | |
| bool enable) | |
| { | |
| struct intel_display *display = to_intel_display(intel_dp); | |
| if (!crtc_state->vrr.enable) | |
| return; | |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_DOWNSPREAD_CTRL, | |
| enable ? DP_MSA_TIMING_PAR_IGNORE_EN : 0) <= 0) | |
| drm_dbg_kms(display->drm, | |
| "Failed to %s MSA_TIMING_PAR_IGNORE in the sink\n", | |
| str_enable_disable(enable)); | |
| } | |
| static void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp, | |
| const struct intel_crtc_state *crtc_state, | |
| bool enable) | |
| { | |
| struct intel_display *display = to_intel_display(intel_dp); | |
| if (!crtc_state->fec_enable) | |
| return; | |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_FEC_CONFIGURATION, | |
| enable ? DP_FEC_READY : 0) <= 0) | |
| drm_dbg_kms(display->drm, "Failed to set FEC_READY to %s in the sink\n", | |
| str_enabled_disabled(enable)); | |
| if (enable && | |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_FEC_STATUS, | |
| DP_FEC_DECODE_EN_DETECTED | DP_FEC_DECODE_DIS_DETECTED) <= 0) | |
| drm_dbg_kms(display->drm, "Failed to clear FEC detected flags\n"); | |
| } | |
| static int wait_for_fec_detected(struct drm_dp_aux *aux, bool enabled) | |
| { | |
| struct intel_display *display = to_intel_display(aux->drm_dev); | |
| int mask = enabled ? DP_FEC_DECODE_EN_DETECTED : DP_FEC_DECODE_DIS_DETECTED; | |
| u8 status = 0; | |
| int ret, err; | |
| ret = poll_timeout_us(err = drm_dp_dpcd_read_byte(aux, DP_FEC_STATUS, &status), | |
| err || (status & mask), | |
| 10 * 1000, 200 * 1000, false); | |
| /* Either can be non-zero, but not both */ | |
| ret = ret ?: err; | |
| if (ret) { | |
| drm_dbg_kms(display->drm, | |
| "Failed waiting for FEC %s to get detected: %d (status 0x%02x)\n", | |
| str_enabled_disabled(enabled), ret, status); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| int intel_ddi_wait_for_fec_status(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| bool enabled) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| int ret; | |
| if (!crtc_state->fec_enable) | |
| return 0; | |
| if (enabled) | |
| ret = intel_de_wait_for_set_ms(display, dp_tp_status_reg(encoder, crtc_state), | |
| DP_TP_STATUS_FEC_ENABLE_LIVE, 1); | |
| else | |
| ret = intel_de_wait_for_clear_ms(display, dp_tp_status_reg(encoder, crtc_state), | |
| DP_TP_STATUS_FEC_ENABLE_LIVE, 1); | |
| if (ret) { | |
| drm_err(display->drm, | |
| "Timeout waiting for FEC live state to get %s\n", | |
| str_enabled_disabled(enabled)); | |
| return ret; | |
| } | |
| /* | |
| * At least the Synoptics MST hub doesn't set the detected flag for | |
| * FEC decoding disabling so skip waiting for that. | |
| */ | |
| if (enabled) { | |
| ret = wait_for_fec_detected(&intel_dp->aux, enabled); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void intel_ddi_enable_fec(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| int i; | |
| int ret; | |
| if (!crtc_state->fec_enable) | |
| return; | |
| intel_de_rmw(display, dp_tp_ctl_reg(encoder, crtc_state), | |
| 0, DP_TP_CTL_FEC_ENABLE); | |
| if (DISPLAY_VER(display) < 30) | |
| return; | |
| ret = intel_ddi_wait_for_fec_status(encoder, crtc_state, true); | |
| if (!ret) | |
| return; | |
| for (i = 0; i < 3; i++) { | |
| drm_dbg_kms(display->drm, "Retry FEC enabling\n"); | |
| intel_de_rmw(display, dp_tp_ctl_reg(encoder, crtc_state), | |
| DP_TP_CTL_FEC_ENABLE, 0); | |
| ret = intel_ddi_wait_for_fec_status(encoder, crtc_state, false); | |
| if (ret) | |
| continue; | |
| intel_de_rmw(display, dp_tp_ctl_reg(encoder, crtc_state), | |
| 0, DP_TP_CTL_FEC_ENABLE); | |
| ret = intel_ddi_wait_for_fec_status(encoder, crtc_state, true); | |
| if (!ret) | |
| return; | |
| } | |
| drm_dbg_kms(display->drm, "Failed to enable FEC after retries\n"); | |
| } | |
| static void intel_ddi_disable_fec(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| if (!crtc_state->fec_enable) | |
| return; | |
| intel_de_rmw(display, dp_tp_ctl_reg(encoder, crtc_state), | |
| DP_TP_CTL_FEC_ENABLE, 0); | |
| intel_de_posting_read(display, dp_tp_ctl_reg(encoder, crtc_state)); | |
| } | |
| static void intel_ddi_power_up_lanes(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| if (intel_encoder_is_combo(encoder)) { | |
| enum phy phy = intel_encoder_to_phy(encoder); | |
| intel_combo_phy_power_up_lanes(display, phy, false, | |
| crtc_state->lane_count, | |
| dig_port->lane_reversal); | |
| } | |
| } | |
| /* | |
| * Splitter enable for eDP MSO is limited to certain pipes, on certain | |
| * platforms. | |
| */ | |
| static u8 intel_ddi_splitter_pipe_mask(struct intel_display *display) | |
| { | |
| if (DISPLAY_VER(display) > 20) | |
| return ~0; | |
| else if (display->platform.alderlake_p) | |
| return BIT(PIPE_A) | BIT(PIPE_B); | |
| else | |
| return BIT(PIPE_A); | |
| } | |
| static void intel_ddi_mso_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *pipe_config) | |
| { | |
| struct intel_display *display = to_intel_display(pipe_config); | |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); | |
| enum pipe pipe = crtc->pipe; | |
| u32 dss1; | |
| if (!HAS_MSO(display)) | |
| return; | |
| dss1 = intel_de_read(display, ICL_PIPE_DSS_CTL1(pipe)); | |
| pipe_config->splitter.enable = dss1 & SPLITTER_ENABLE; | |
| if (!pipe_config->splitter.enable) | |
| return; | |
| if (drm_WARN_ON(display->drm, !(intel_ddi_splitter_pipe_mask(display) & BIT(pipe)))) { | |
| pipe_config->splitter.enable = false; | |
| return; | |
| } | |
| switch (dss1 & SPLITTER_CONFIGURATION_MASK) { | |
| default: | |
| drm_WARN(display->drm, true, | |
| "Invalid splitter configuration, dss1=0x%08x\n", dss1); | |
| fallthrough; | |
| case SPLITTER_CONFIGURATION_2_SEGMENT: | |
| pipe_config->splitter.link_count = 2; | |
| break; | |
| case SPLITTER_CONFIGURATION_4_SEGMENT: | |
| pipe_config->splitter.link_count = 4; | |
| break; | |
| } | |
| pipe_config->splitter.pixel_overlap = REG_FIELD_GET(OVERLAP_PIXELS_MASK, dss1); | |
| } | |
| static void intel_ddi_mso_configure(const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); | |
| enum pipe pipe = crtc->pipe; | |
| u32 dss1 = 0; | |
| if (!HAS_MSO(display)) | |
| return; | |
| if (crtc_state->splitter.enable) { | |
| dss1 |= SPLITTER_ENABLE; | |
| dss1 |= OVERLAP_PIXELS(crtc_state->splitter.pixel_overlap); | |
| if (crtc_state->splitter.link_count == 2) | |
| dss1 |= SPLITTER_CONFIGURATION_2_SEGMENT; | |
| else | |
| dss1 |= SPLITTER_CONFIGURATION_4_SEGMENT; | |
| } | |
| intel_de_rmw(display, ICL_PIPE_DSS_CTL1(pipe), | |
| SPLITTER_ENABLE | SPLITTER_CONFIGURATION_MASK | | |
| OVERLAP_PIXELS_MASK, dss1); | |
| } | |
| static void | |
| mtl_ddi_enable_d2d(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| intel_reg_t reg; | |
| u32 set_bits, wait_bits; | |
| int ret; | |
| if (DISPLAY_VER(display) < 14) | |
| return; | |
| if (DISPLAY_VER(display) >= 20) { | |
| reg = DDI_BUF_CTL(port); | |
| set_bits = XE2LPD_DDI_BUF_D2D_LINK_ENABLE; | |
| wait_bits = XE2LPD_DDI_BUF_D2D_LINK_STATE; | |
| } else { | |
| reg = XELPDP_PORT_BUF_CTL1(display, port); | |
| set_bits = XELPDP_PORT_BUF_D2D_LINK_ENABLE; | |
| wait_bits = XELPDP_PORT_BUF_D2D_LINK_STATE; | |
| } | |
| intel_de_rmw(display, reg, 0, set_bits); | |
| ret = intel_de_wait_for_set_us(display, reg, wait_bits, 100); | |
| if (ret) { | |
| drm_err(display->drm, "Timeout waiting for D2D Link enable for DDI/PORT_BUF_CTL %c\n", | |
| port_name(port)); | |
| } | |
| } | |
| static void mtl_port_buf_ctl_program(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| enum port port = encoder->port; | |
| u32 val = 0; | |
| val |= XELPDP_PORT_WIDTH(crtc_state->lane_count); | |
| if (intel_dp_is_uhbr(crtc_state)) | |
| val |= XELPDP_PORT_BUF_PORT_DATA_40BIT; | |
| else | |
| val |= XELPDP_PORT_BUF_PORT_DATA_10BIT; | |
| if (dig_port->lane_reversal) | |
| val |= XELPDP_PORT_REVERSAL; | |
| intel_de_rmw(display, XELPDP_PORT_BUF_CTL1(display, port), | |
| XELPDP_PORT_WIDTH_MASK | XELPDP_PORT_BUF_PORT_DATA_WIDTH_MASK, | |
| val); | |
| } | |
| static void mtl_port_buf_ctl_io_selection(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| u32 val; | |
| val = intel_tc_port_in_tbt_alt_mode(dig_port) ? | |
| XELPDP_PORT_BUF_IO_SELECT_TBT : 0; | |
| intel_de_rmw(display, XELPDP_PORT_BUF_CTL1(display, encoder->port), | |
| XELPDP_PORT_BUF_IO_SELECT_TBT, val); | |
| } | |
| static void mtl_ddi_pre_enable_dp(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST); | |
| bool transparent_mode; | |
| int ret; | |
| intel_dp_set_link_params(intel_dp, | |
| crtc_state->port_clock, | |
| crtc_state->lane_count); | |
| /* | |
| * We only configure what the register value will be here. Actual | |
| * enabling happens during link training farther down. | |
| */ | |
| intel_ddi_init_dp_buf_reg(encoder, crtc_state); | |
| /* | |
| * 1. Enable Power Wells | |
| * | |
| * This was handled at the beginning of intel_atomic_commit_tail(), | |
| * before we called down into this function. | |
| */ | |
| /* 2. PMdemand was already set */ | |
| /* 3. Select Thunderbolt */ | |
| mtl_port_buf_ctl_io_selection(encoder); | |
| /* 5. Enable the port PLL */ | |
| intel_ddi_enable_clock(encoder, crtc_state); | |
| /* | |
| * 6.a Configure Transcoder Clock Select to direct the Port clock to the | |
| * Transcoder. | |
| */ | |
| intel_ddi_enable_transcoder_clock(encoder, crtc_state); | |
| /* | |
| * 6.b If DP v2.0/128b mode - Configure TRANS_DP2_CTL register settings. | |
| * 6.c Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST | |
| * Transport Select | |
| */ | |
| intel_ddi_config_transcoder_func(encoder, crtc_state); | |
| /* | |
| * 6.e Program CoG/MSO configuration bits in DSS_CTL1 if selected. | |
| */ | |
| intel_ddi_mso_configure(crtc_state); | |
| if (!is_mst) | |
| intel_dp_set_power(intel_dp, DP_SET_POWER_D0); | |
| transparent_mode = intel_dp_lttpr_transparent_mode_enabled(intel_dp); | |
| drm_dp_lttpr_wake_timeout_setup(&intel_dp->aux, transparent_mode); | |
| intel_dp_configure_protocol_converter(intel_dp, crtc_state); | |
| if (!is_mst) | |
| intel_dp_sink_enable_decompression(state, | |
| to_intel_connector(conn_state->connector), | |
| crtc_state); | |
| /* | |
| * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit | |
| * in the FEC_CONFIGURATION register to 1 before initiating link | |
| * training | |
| */ | |
| intel_dp_sink_set_fec_ready(intel_dp, crtc_state, true); | |
| intel_dp_check_frl_training(intel_dp); | |
| intel_dp_pcon_dsc_configure(intel_dp, crtc_state); | |
| /* | |
| * 6. The rest of the below are substeps under the bspec's "Enable and | |
| * Train Display Port" step. Note that steps that are specific to | |
| * MST will be handled by intel_mst_pre_enable_dp() before/after it | |
| * calls into this function. Also intel_mst_pre_enable_dp() only calls | |
| * us when active_mst_links==0, so any steps designated for "single | |
| * stream or multi-stream master transcoder" can just be performed | |
| * unconditionally here. | |
| * | |
| * mtl_ddi_prepare_link_retrain() that is called by | |
| * intel_dp_start_link_train() will execute steps: 6.d, 6.f, 6.g, 6.h, | |
| * 6.i and 6.j | |
| * | |
| * 6.k Follow DisplayPort specification training sequence (see notes for | |
| * failure handling) | |
| * 6.m If DisplayPort multi-stream - Set DP_TP_CTL link training to Idle | |
| * Pattern, wait for 5 idle patterns (DP_TP_STATUS Min_Idles_Sent) | |
| * (timeout after 800 us) | |
| */ | |
| intel_dp_start_link_train(state, intel_dp, crtc_state); | |
| /* 6.n Set DP_TP_CTL link training to Normal */ | |
| if (!is_trans_port_sync_mode(crtc_state)) | |
| intel_dp_stop_link_train(intel_dp, crtc_state); | |
| /* 6.o Configure and enable FEC if needed */ | |
| intel_ddi_enable_fec(encoder, crtc_state); | |
| /* 7.a 128b/132b SST. */ | |
| if (!is_mst && intel_dp_is_uhbr(crtc_state)) { | |
| /* VCPID 1, start slot 0 for 128b/132b, tu slots */ | |
| ret = drm_dp_dpcd_write_payload(&intel_dp->aux, 1, 0, crtc_state->dp_m_n.tu); | |
| if (ret < 0) | |
| intel_dp_queue_modeset_retry_for_link(state, encoder, crtc_state); | |
| } | |
| if (!is_mst) | |
| intel_dsc_dp_pps_write(encoder, crtc_state); | |
| } | |
| static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST); | |
| int ret; | |
| intel_dp_set_link_params(intel_dp, | |
| crtc_state->port_clock, | |
| crtc_state->lane_count); | |
| /* | |
| * We only configure what the register value will be here. Actual | |
| * enabling happens during link training farther down. | |
| */ | |
| intel_ddi_init_dp_buf_reg(encoder, crtc_state); | |
| /* | |
| * 1. Enable Power Wells | |
| * | |
| * This was handled at the beginning of intel_atomic_commit_tail(), | |
| * before we called down into this function. | |
| */ | |
| /* 2. Enable Panel Power if PPS is required */ | |
| intel_pps_on(intel_dp); | |
| /* | |
| * 3. For non-TBT Type-C ports, set FIA lane count | |
| * (DFLEXDPSP.DPX4TXLATC) | |
| * | |
| * This was done before tgl_ddi_pre_enable_dp by | |
| * hsw_crtc_enable()->intel_encoders_pre_pll_enable(). | |
| */ | |
| /* | |
| * 4. Enable the port PLL. | |
| * | |
| * The PLL enabling itself was already done before this function by | |
| * hsw_crtc_enable()->intel_enable_dpll(). We need only | |
| * configure the PLL to port mapping here. | |
| */ | |
| intel_ddi_enable_clock(encoder, crtc_state); | |
| /* 5. If IO power is controlled through PWR_WELL_CTL, Enable IO Power */ | |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) { | |
| drm_WARN_ON(display->drm, dig_port->ddi_io_wakeref); | |
| dig_port->ddi_io_wakeref = intel_display_power_get(display, | |
| dig_port->ddi_io_power_domain); | |
| } | |
| /* 6. Program DP_MODE */ | |
| icl_program_mg_dp_mode(dig_port, crtc_state); | |
| /* | |
| * 7. The rest of the below are substeps under the bspec's "Enable and | |
| * Train Display Port" step. Note that steps that are specific to | |
| * MST will be handled by intel_mst_pre_enable_dp() before/after it | |
| * calls into this function. Also intel_mst_pre_enable_dp() only calls | |
| * us when active_mst_links==0, so any steps designated for "single | |
| * stream or multi-stream master transcoder" can just be performed | |
| * unconditionally here. | |
| */ | |
| /* | |
| * 7.a Configure Transcoder Clock Select to direct the Port clock to the | |
| * Transcoder. | |
| */ | |
| intel_ddi_enable_transcoder_clock(encoder, crtc_state); | |
| /* | |
| * 7.b Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST | |
| * Transport Select | |
| */ | |
| intel_ddi_config_transcoder_func(encoder, crtc_state); | |
| /* | |
| * 7.c Configure & enable DP_TP_CTL with link training pattern 1 | |
| * selected | |
| * | |
| * This will be handled by the intel_dp_start_link_train() farther | |
| * down this function. | |
| */ | |
| /* 7.e Configure voltage swing and related IO settings */ | |
| encoder->set_signal_levels(encoder, crtc_state); | |
| /* | |
| * 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up | |
| * the used lanes of the DDI. | |
| */ | |
| intel_ddi_power_up_lanes(encoder, crtc_state); | |
| /* | |
| * 7.g Program CoG/MSO configuration bits in DSS_CTL1 if selected. | |
| */ | |
| intel_ddi_mso_configure(crtc_state); | |
| if (!is_mst) | |
| intel_dp_set_power(intel_dp, DP_SET_POWER_D0); | |
| intel_dp_configure_protocol_converter(intel_dp, crtc_state); | |
| if (!is_mst) | |
| intel_dp_sink_enable_decompression(state, | |
| to_intel_connector(conn_state->connector), | |
| crtc_state); | |
| /* | |
| * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit | |
| * in the FEC_CONFIGURATION register to 1 before initiating link | |
| * training | |
| */ | |
| intel_dp_sink_set_fec_ready(intel_dp, crtc_state, true); | |
| intel_dp_check_frl_training(intel_dp); | |
| intel_dp_pcon_dsc_configure(intel_dp, crtc_state); | |
| /* | |
| * 7.i Follow DisplayPort specification training sequence (see notes for | |
| * failure handling) | |
| * 7.j If DisplayPort multi-stream - Set DP_TP_CTL link training to Idle | |
| * Pattern, wait for 5 idle patterns (DP_TP_STATUS Min_Idles_Sent) | |
| * (timeout after 800 us) | |
| */ | |
| intel_dp_start_link_train(state, intel_dp, crtc_state); | |
| /* 7.k Set DP_TP_CTL link training to Normal */ | |
| if (!is_trans_port_sync_mode(crtc_state)) | |
| intel_dp_stop_link_train(intel_dp, crtc_state); | |
| /* 7.l Configure and enable FEC if needed */ | |
| intel_ddi_enable_fec(encoder, crtc_state); | |
| if (!is_mst && intel_dp_is_uhbr(crtc_state)) { | |
| /* VCPID 1, start slot 0 for 128b/132b, tu slots */ | |
| ret = drm_dp_dpcd_write_payload(&intel_dp->aux, 1, 0, crtc_state->dp_m_n.tu); | |
| if (ret < 0) | |
| intel_dp_queue_modeset_retry_for_link(state, encoder, crtc_state); | |
| } | |
| if (!is_mst) | |
| intel_dsc_dp_pps_write(encoder, crtc_state); | |
| } | |
| static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| enum port port = encoder->port; | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST); | |
| if (DISPLAY_VER(display) < 11) | |
| drm_WARN_ON(display->drm, | |
| is_mst && (port == PORT_A || port == PORT_E)); | |
| else | |
| drm_WARN_ON(display->drm, is_mst && port == PORT_A); | |
| intel_dp_set_link_params(intel_dp, | |
| crtc_state->port_clock, | |
| crtc_state->lane_count); | |
| /* | |
| * We only configure what the register value will be here. Actual | |
| * enabling happens during link training farther down. | |
| */ | |
| intel_ddi_init_dp_buf_reg(encoder, crtc_state); | |
| intel_pps_on(intel_dp); | |
| intel_ddi_enable_clock(encoder, crtc_state); | |
| if (!intel_tc_port_in_tbt_alt_mode(dig_port)) { | |
| drm_WARN_ON(display->drm, dig_port->ddi_io_wakeref); | |
| dig_port->ddi_io_wakeref = intel_display_power_get(display, | |
| dig_port->ddi_io_power_domain); | |
| } | |
| icl_program_mg_dp_mode(dig_port, crtc_state); | |
| if (has_buf_trans_select(display)) | |
| hsw_prepare_dp_ddi_buffers(encoder, crtc_state); | |
| encoder->set_signal_levels(encoder, crtc_state); | |
| intel_ddi_power_up_lanes(encoder, crtc_state); | |
| if (!is_mst) | |
| intel_dp_set_power(intel_dp, DP_SET_POWER_D0); | |
| intel_dp_configure_protocol_converter(intel_dp, crtc_state); | |
| if (!is_mst) | |
| intel_dp_sink_enable_decompression(state, | |
| to_intel_connector(conn_state->connector), | |
| crtc_state); | |
| intel_dp_sink_set_fec_ready(intel_dp, crtc_state, true); | |
| intel_dp_start_link_train(state, intel_dp, crtc_state); | |
| if ((port != PORT_A || DISPLAY_VER(display) >= 9) && | |
| !is_trans_port_sync_mode(crtc_state)) | |
| intel_dp_stop_link_train(intel_dp, crtc_state); | |
| intel_ddi_enable_fec(encoder, crtc_state); | |
| if (!is_mst) { | |
| intel_ddi_enable_transcoder_clock(encoder, crtc_state); | |
| intel_dsc_dp_pps_write(encoder, crtc_state); | |
| } | |
| } | |
| static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| if (HAS_DP20(display)) | |
| intel_dp_128b132b_sdp_crc16(enc_to_intel_dp(encoder), | |
| crtc_state); | |
| /* Panel replay has to be enabled in sink dpcd before link training. */ | |
| intel_psr_panel_replay_enable_sink(enc_to_intel_dp(encoder)); | |
| if (DISPLAY_VER(display) >= 14) | |
| mtl_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state); | |
| else if (DISPLAY_VER(display) >= 12) | |
| tgl_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state); | |
| else | |
| hsw_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state); | |
| /* MST will call a setting of MSA after an allocating of Virtual Channel | |
| * from MST encoder pre_enable callback. | |
| */ | |
| if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) | |
| intel_ddi_set_dp_msa(crtc_state, conn_state); | |
| } | |
| static void intel_ddi_pre_enable_hdmi(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| struct intel_hdmi *intel_hdmi = &dig_port->hdmi; | |
| intel_dp_dual_mode_set_tmds_output(intel_hdmi, true); | |
| intel_ddi_enable_clock(encoder, crtc_state); | |
| drm_WARN_ON(display->drm, dig_port->ddi_io_wakeref); | |
| dig_port->ddi_io_wakeref = intel_display_power_get(display, | |
| dig_port->ddi_io_power_domain); | |
| icl_program_mg_dp_mode(dig_port, crtc_state); | |
| intel_ddi_enable_transcoder_clock(encoder, crtc_state); | |
| dig_port->set_infoframes(encoder, | |
| crtc_state->has_infoframe, | |
| crtc_state, conn_state); | |
| } | |
| /* | |
| * Note: Also called from the ->pre_enable of the first active MST stream | |
| * encoder on its primary encoder. | |
| * | |
| * When called from DP MST code: | |
| * | |
| * - conn_state will be NULL | |
| * | |
| * - encoder will be the primary encoder (i.e. mst->primary) | |
| * | |
| * - the main connector associated with this port won't be active or linked to a | |
| * crtc | |
| * | |
| * - crtc_state will be the state of the first stream to be activated on this | |
| * port, and it may not be the same stream that will be deactivated last, but | |
| * each stream should have a state that is identical when it comes to the DP | |
| * link parameters. | |
| */ | |
| static void intel_ddi_pre_enable(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(state); | |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); | |
| enum pipe pipe = crtc->pipe; | |
| drm_WARN_ON(display->drm, crtc_state->has_pch_encoder); | |
| intel_set_cpu_fifo_underrun_reporting(display, pipe, true); | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { | |
| intel_ddi_pre_enable_hdmi(state, encoder, crtc_state, | |
| conn_state); | |
| } else { | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| intel_ddi_pre_enable_dp(state, encoder, crtc_state, | |
| conn_state); | |
| /* FIXME precompute everything properly */ | |
| /* FIXME how do we turn infoframes off again? */ | |
| if (intel_lspcon_active(dig_port) && intel_dp_has_hdmi_sink(&dig_port->dp)) | |
| dig_port->set_infoframes(encoder, | |
| crtc_state->has_infoframe, | |
| crtc_state, conn_state); | |
| } | |
| } | |
| static void | |
| mtl_ddi_disable_d2d(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| intel_reg_t reg; | |
| u32 clr_bits, wait_bits; | |
| int ret; | |
| if (DISPLAY_VER(display) < 14) | |
| return; | |
| if (DISPLAY_VER(display) >= 20) { | |
| reg = DDI_BUF_CTL(port); | |
| clr_bits = XE2LPD_DDI_BUF_D2D_LINK_ENABLE; | |
| wait_bits = XE2LPD_DDI_BUF_D2D_LINK_STATE; | |
| } else { | |
| reg = XELPDP_PORT_BUF_CTL1(display, port); | |
| clr_bits = XELPDP_PORT_BUF_D2D_LINK_ENABLE; | |
| wait_bits = XELPDP_PORT_BUF_D2D_LINK_STATE; | |
| } | |
| intel_de_rmw(display, reg, clr_bits, 0); | |
| ret = intel_de_wait_for_clear_us(display, reg, wait_bits, 100); | |
| if (ret) | |
| drm_err(display->drm, "Timeout waiting for D2D Link disable for DDI/PORT_BUF_CTL %c\n", | |
| port_name(port)); | |
| } | |
| static void intel_ddi_buf_enable(struct intel_encoder *encoder, u32 buf_ctl) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| intel_de_write(display, DDI_BUF_CTL(port), buf_ctl | DDI_BUF_CTL_ENABLE); | |
| intel_de_posting_read(display, DDI_BUF_CTL(port)); | |
| intel_wait_ddi_buf_active(encoder); | |
| } | |
| static void intel_ddi_buf_disable(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum port port = encoder->port; | |
| intel_de_rmw(display, DDI_BUF_CTL(port), DDI_BUF_CTL_ENABLE, 0); | |
| if (DISPLAY_VER(display) >= 14) | |
| intel_wait_ddi_buf_idle(display, port); | |
| mtl_ddi_disable_d2d(encoder); | |
| if (intel_crtc_has_dp_encoder(crtc_state)) { | |
| intel_de_rmw(display, dp_tp_ctl_reg(encoder, crtc_state), | |
| DP_TP_CTL_ENABLE, 0); | |
| } | |
| intel_ddi_disable_fec(encoder, crtc_state); | |
| if (DISPLAY_VER(display) < 14) | |
| intel_wait_ddi_buf_idle(display, port); | |
| intel_ddi_wait_for_fec_status(encoder, crtc_state, false); | |
| } | |
| static void intel_ddi_post_disable_dp(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *old_crtc_state, | |
| const struct drm_connector_state *old_conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| struct intel_dp *intel_dp = &dig_port->dp; | |
| struct ref_tracker *wakeref; | |
| bool is_mst = intel_crtc_has_type(old_crtc_state, | |
| INTEL_OUTPUT_DP_MST); | |
| if (!is_mst) | |
| intel_dp_set_infoframes(encoder, false, | |
| old_crtc_state, old_conn_state); | |
| /* | |
| * Power down sink before disabling the port, otherwise we end | |
| * up getting interrupts from the sink on detecting link loss. | |
| */ | |
| intel_dp_set_power(intel_dp, DP_SET_POWER_D3); | |
| if (DISPLAY_VER(display) >= 12) { | |
| if (is_mst || intel_dp_is_uhbr(old_crtc_state)) { | |
| enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder; | |
| intel_de_rmw(display, | |
| TRANS_DDI_FUNC_CTL(display, cpu_transcoder), | |
| TGL_TRANS_DDI_PORT_MASK | TRANS_DDI_MODE_SELECT_MASK, | |
| 0); | |
| } | |
| } else { | |
| if (!is_mst) | |
| intel_ddi_disable_transcoder_clock(old_crtc_state); | |
| } | |
| intel_ddi_buf_disable(encoder, old_crtc_state); | |
| intel_dp_sink_set_fec_ready(intel_dp, old_crtc_state, false); | |
| intel_ddi_config_transcoder_dp2(old_crtc_state, false); | |
| /* | |
| * From TGL spec: "If single stream or multi-stream master transcoder: | |
| * Configure Transcoder Clock select to direct no clock to the | |
| * transcoder" | |
| */ | |
| if (DISPLAY_VER(display) >= 12) | |
| intel_ddi_disable_transcoder_clock(old_crtc_state); | |
| intel_pps_vdd_on(intel_dp); | |
| intel_pps_off(intel_dp); | |
| wakeref = fetch_and_zero(&dig_port->ddi_io_wakeref); | |
| if (wakeref) | |
| intel_display_power_put(display, | |
| dig_port->ddi_io_power_domain, | |
| wakeref); | |
| intel_ddi_disable_clock(encoder); | |
| /* De-select Thunderbolt */ | |
| if (DISPLAY_VER(display) >= 14) | |
| intel_de_rmw(display, XELPDP_PORT_BUF_CTL1(display, encoder->port), | |
| XELPDP_PORT_BUF_IO_SELECT_TBT, 0); | |
| } | |
| static void intel_ddi_post_disable_hdmi(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *old_crtc_state, | |
| const struct drm_connector_state *old_conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| struct intel_hdmi *intel_hdmi = &dig_port->hdmi; | |
| struct ref_tracker *wakeref; | |
| dig_port->set_infoframes(encoder, false, | |
| old_crtc_state, old_conn_state); | |
| if (DISPLAY_VER(display) < 12) | |
| intel_ddi_disable_transcoder_clock(old_crtc_state); | |
| intel_ddi_buf_disable(encoder, old_crtc_state); | |
| if (DISPLAY_VER(display) >= 12) | |
| intel_ddi_disable_transcoder_clock(old_crtc_state); | |
| wakeref = fetch_and_zero(&dig_port->ddi_io_wakeref); | |
| if (wakeref) | |
| intel_display_power_put(display, | |
| dig_port->ddi_io_power_domain, | |
| wakeref); | |
| intel_ddi_disable_clock(encoder); | |
| intel_dp_dual_mode_set_tmds_output(intel_hdmi, false); | |
| } | |
| static void intel_ddi_post_disable_hdmi_or_sst(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *old_crtc_state, | |
| const struct drm_connector_state *old_conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| struct intel_crtc *pipe_crtc; | |
| bool is_hdmi = intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI); | |
| for_each_pipe_crtc_modeset_disable(display, pipe_crtc, old_crtc_state) { | |
| const struct intel_crtc_state *old_pipe_crtc_state = | |
| intel_atomic_get_old_crtc_state(state, pipe_crtc); | |
| intel_crtc_vblank_off(old_pipe_crtc_state); | |
| } | |
| intel_disable_transcoder(old_crtc_state); | |
| /* 128b/132b SST */ | |
| if (!is_hdmi && intel_dp_is_uhbr(old_crtc_state)) { | |
| /* VCPID 1, start slot 0 for 128b/132b, clear */ | |
| drm_dp_dpcd_write_payload(&intel_dp->aux, 1, 0, 0); | |
| intel_ddi_clear_act_sent(encoder, old_crtc_state); | |
| intel_de_rmw(display, TRANS_DDI_FUNC_CTL(display, old_crtc_state->cpu_transcoder), | |
| TRANS_DDI_DP_VC_PAYLOAD_ALLOC, 0); | |
| intel_ddi_wait_for_act_sent(encoder, old_crtc_state); | |
| drm_dp_dpcd_poll_act_handled(&intel_dp->aux, 0); | |
| } | |
| intel_vrr_transcoder_disable(old_crtc_state); | |
| intel_ddi_disable_transcoder_func(old_crtc_state); | |
| for_each_pipe_crtc_modeset_disable(display, pipe_crtc, old_crtc_state) { | |
| const struct intel_crtc_state *old_pipe_crtc_state = | |
| intel_atomic_get_old_crtc_state(state, pipe_crtc); | |
| intel_dsc_disable(old_pipe_crtc_state); | |
| if (DISPLAY_VER(display) >= 9) | |
| skl_scaler_disable(old_pipe_crtc_state); | |
| else | |
| ilk_pfit_disable(old_pipe_crtc_state); | |
| } | |
| } | |
| /* | |
| * Note: Also called from the ->post_disable of the last active MST stream | |
| * encoder on its primary encoder. See also the comment for | |
| * intel_ddi_pre_enable(). | |
| */ | |
| static void intel_ddi_post_disable(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *old_crtc_state, | |
| const struct drm_connector_state *old_conn_state) | |
| { | |
| if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DP_MST)) | |
| intel_ddi_post_disable_hdmi_or_sst(state, encoder, old_crtc_state, | |
| old_conn_state); | |
| /* | |
| * When called from DP MST code: | |
| * - old_conn_state will be NULL | |
| * - encoder will be the main encoder (ie. mst->primary) | |
| * - the main connector associated with this port | |
| * won't be active or linked to a crtc | |
| * - old_crtc_state will be the state of the last stream to | |
| * be deactivated on this port, and it may not be the same | |
| * stream that was activated last, but each stream | |
| * should have a state that is identical when it comes to | |
| * the DP link parameters | |
| */ | |
| if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI)) | |
| intel_ddi_post_disable_hdmi(state, encoder, old_crtc_state, | |
| old_conn_state); | |
| else | |
| intel_ddi_post_disable_dp(state, encoder, old_crtc_state, | |
| old_conn_state); | |
| } | |
| /* | |
| * Note: Also called from the ->post_pll_disable of the last active MST stream | |
| * encoder on its primary encoder. See also the comment for | |
| * intel_ddi_pre_enable(). | |
| */ | |
| static void intel_ddi_post_pll_disable(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *old_crtc_state, | |
| const struct drm_connector_state *old_conn_state) | |
| { | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| main_link_aux_power_domain_put(dig_port, old_crtc_state); | |
| if (intel_encoder_is_tc(encoder)) | |
| intel_tc_port_put_link(dig_port); | |
| } | |
| static void trans_port_sync_stop_link_train(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| const struct drm_connector_state *conn_state; | |
| struct drm_connector *conn; | |
| int i; | |
| if (!crtc_state->sync_mode_slaves_mask) | |
| return; | |
| for_each_new_connector_in_state(&state->base, conn, conn_state, i) { | |
| struct intel_encoder *slave_encoder = | |
| to_intel_encoder(conn_state->best_encoder); | |
| struct intel_crtc *slave_crtc = to_intel_crtc(conn_state->crtc); | |
| const struct intel_crtc_state *slave_crtc_state; | |
| if (!slave_crtc) | |
| continue; | |
| slave_crtc_state = | |
| intel_atomic_get_new_crtc_state(state, slave_crtc); | |
| if (slave_crtc_state->master_transcoder != | |
| crtc_state->cpu_transcoder) | |
| continue; | |
| intel_dp_stop_link_train(enc_to_intel_dp(slave_encoder), | |
| slave_crtc_state); | |
| } | |
| usleep_range(200, 400); | |
| intel_dp_stop_link_train(enc_to_intel_dp(encoder), | |
| crtc_state); | |
| } | |
| static void intel_ddi_enable_dp(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| enum port port = encoder->port; | |
| if (port == PORT_A && DISPLAY_VER(display) < 9) | |
| intel_dp_stop_link_train(intel_dp, crtc_state); | |
| drm_connector_update_privacy_screen(conn_state); | |
| intel_edp_backlight_on(crtc_state, conn_state); | |
| intel_panel_prepare(crtc_state, conn_state); | |
| if (!intel_lspcon_active(dig_port) || intel_dp_has_hdmi_sink(&dig_port->dp)) | |
| intel_dp_set_infoframes(encoder, true, crtc_state, conn_state); | |
| trans_port_sync_stop_link_train(state, encoder, crtc_state); | |
| } | |
| static intel_reg_t | |
| gen9_chicken_trans_reg_by_port(struct intel_display *display, enum port port) | |
| { | |
| static const enum transcoder trans[] = { | |
| [PORT_A] = TRANSCODER_EDP, | |
| [PORT_B] = TRANSCODER_A, | |
| [PORT_C] = TRANSCODER_B, | |
| [PORT_D] = TRANSCODER_C, | |
| [PORT_E] = TRANSCODER_A, | |
| }; | |
| drm_WARN_ON(display->drm, DISPLAY_VER(display) < 9); | |
| if (drm_WARN_ON(display->drm, port < PORT_A || port > PORT_E)) | |
| port = PORT_A; | |
| return CHICKEN_TRANS(display, trans[port]); | |
| } | |
| static void intel_ddi_enable_hdmi(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| struct drm_connector *connector = conn_state->connector; | |
| enum port port = encoder->port; | |
| u32 buf_ctl = 0; | |
| if (!intel_hdmi_handle_sink_scrambling(encoder, connector, | |
| crtc_state->hdmi_high_tmds_clock_ratio, | |
| crtc_state->hdmi_scrambling)) | |
| drm_dbg_kms(display->drm, | |
| "[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n", | |
| connector->base.id, connector->name); | |
| if (has_buf_trans_select(display)) | |
| hsw_prepare_hdmi_ddi_buffers(encoder, crtc_state); | |
| /* e. Enable D2D Link for C10/C20 Phy */ | |
| mtl_ddi_enable_d2d(encoder); | |
| encoder->set_signal_levels(encoder, crtc_state); | |
| /* Display WA #1143: skl,kbl,cfl */ | |
| if (DISPLAY_VER(display) == 9 && !display->platform.broxton) { | |
| /* | |
| * For some reason these chicken bits have been | |
| * stuffed into a transcoder register, event though | |
| * the bits affect a specific DDI port rather than | |
| * a specific transcoder. | |
| */ | |
| intel_reg_t reg = gen9_chicken_trans_reg_by_port(display, port); | |
| u32 val; | |
| val = intel_de_read(display, reg); | |
| if (port == PORT_E) | |
| val |= DDIE_TRAINING_OVERRIDE_ENABLE | | |
| DDIE_TRAINING_OVERRIDE_VALUE; | |
| else | |
| val |= DDI_TRAINING_OVERRIDE_ENABLE | | |
| DDI_TRAINING_OVERRIDE_VALUE; | |
| intel_de_write(display, reg, val); | |
| intel_de_posting_read(display, reg); | |
| udelay(1); | |
| if (port == PORT_E) | |
| val &= ~(DDIE_TRAINING_OVERRIDE_ENABLE | | |
| DDIE_TRAINING_OVERRIDE_VALUE); | |
| else | |
| val &= ~(DDI_TRAINING_OVERRIDE_ENABLE | | |
| DDI_TRAINING_OVERRIDE_VALUE); | |
| intel_de_write(display, reg, val); | |
| } | |
| intel_ddi_power_up_lanes(encoder, crtc_state); | |
| /* In HDMI/DVI mode, the port width, and swing/emphasis values | |
| * are ignored so nothing special needs to be done besides | |
| * enabling the port. | |
| * | |
| * On ADL_P the PHY link rate and lane count must be programmed but | |
| * these are both 0 for HDMI. | |
| * | |
| * But MTL onwards HDMI2.1 is supported and in TMDS mode this | |
| * is filled with lane count, already set in the crtc_state. | |
| * The same is required to be filled in PORT_BUF_CTL for C10/20 Phy. | |
| */ | |
| if (dig_port->lane_reversal) | |
| buf_ctl |= DDI_BUF_PORT_REVERSAL; | |
| if (dig_port->ddi_a_4_lanes) | |
| buf_ctl |= DDI_A_4_LANES; | |
| if (DISPLAY_VER(display) >= 14) { | |
| u32 port_buf = 0; | |
| port_buf |= XELPDP_PORT_WIDTH(crtc_state->lane_count); | |
| if (dig_port->lane_reversal) | |
| port_buf |= XELPDP_PORT_REVERSAL; | |
| intel_de_rmw(display, XELPDP_PORT_BUF_CTL1(display, port), | |
| XELPDP_PORT_WIDTH_MASK | XELPDP_PORT_REVERSAL, port_buf); | |
| buf_ctl |= DDI_PORT_WIDTH(crtc_state->lane_count); | |
| if (DISPLAY_VER(display) >= 20) | |
| buf_ctl |= XE2LPD_DDI_BUF_D2D_LINK_ENABLE; | |
| } else if (display->platform.alderlake_p && intel_encoder_is_tc(encoder)) { | |
| drm_WARN_ON(display->drm, !intel_tc_port_in_legacy_mode(dig_port)); | |
| buf_ctl |= DDI_BUF_CTL_TC_PHY_OWNERSHIP; | |
| } | |
| intel_ddi_buf_enable(encoder, buf_ctl); | |
| intel_hdmi_poll_for_scrambling_enable(crtc_state, connector); | |
| } | |
| static void intel_ddi_enable(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_crtc *pipe_crtc; | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| bool is_hdmi = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI); | |
| /* 128b/132b SST */ | |
| if (!is_hdmi && intel_dp_is_uhbr(crtc_state)) { | |
| const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; | |
| u64 crtc_clock_hz = KHz(adjusted_mode->crtc_clock); | |
| intel_de_write(display, TRANS_DP2_VFREQHIGH(cpu_transcoder), | |
| TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz >> 24)); | |
| intel_de_write(display, TRANS_DP2_VFREQLOW(cpu_transcoder), | |
| TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff)); | |
| } | |
| intel_ddi_enable_transcoder_func(encoder, crtc_state); | |
| intel_vrr_transcoder_enable(crtc_state); | |
| /* 128b/132b SST */ | |
| if (!is_hdmi && intel_dp_is_uhbr(crtc_state)) { | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| intel_ddi_clear_act_sent(encoder, crtc_state); | |
| intel_de_rmw(display, TRANS_DDI_FUNC_CTL(display, cpu_transcoder), 0, | |
| TRANS_DDI_DP_VC_PAYLOAD_ALLOC); | |
| intel_ddi_wait_for_act_sent(encoder, crtc_state); | |
| drm_dp_dpcd_poll_act_handled(&intel_dp->aux, 0); | |
| } | |
| intel_enable_transcoder(crtc_state); | |
| intel_ddi_wait_for_fec_status(encoder, crtc_state, true); | |
| for_each_pipe_crtc_modeset_enable(display, pipe_crtc, crtc_state) { | |
| const struct intel_crtc_state *pipe_crtc_state = | |
| intel_atomic_get_new_crtc_state(state, pipe_crtc); | |
| intel_crtc_vblank_on(pipe_crtc_state); | |
| } | |
| if (is_hdmi) | |
| intel_ddi_enable_hdmi(state, encoder, crtc_state, conn_state); | |
| else | |
| intel_ddi_enable_dp(state, encoder, crtc_state, conn_state); | |
| intel_hdcp_enable(state, encoder, crtc_state, conn_state); | |
| } | |
| static void intel_ddi_disable_dp(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *old_crtc_state, | |
| const struct drm_connector_state *old_conn_state) | |
| { | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| struct intel_connector *connector = | |
| to_intel_connector(old_conn_state->connector); | |
| intel_dp->link.active = false; | |
| intel_panel_unprepare(old_conn_state); | |
| intel_psr_disable(intel_dp, old_crtc_state); | |
| intel_alpm_disable(intel_dp); | |
| intel_edp_backlight_off(old_conn_state); | |
| /* Disable the decompression in DP Sink */ | |
| intel_dp_sink_disable_decompression(state, | |
| connector, old_crtc_state); | |
| /* Disable Ignore_MSA bit in DP Sink */ | |
| intel_dp_sink_set_msa_timing_par_ignore_state(intel_dp, old_crtc_state, | |
| false); | |
| } | |
| static void intel_ddi_disable_hdmi(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *old_crtc_state, | |
| const struct drm_connector_state *old_conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct drm_connector *connector = old_conn_state->connector; | |
| if (!intel_hdmi_handle_sink_scrambling(encoder, connector, | |
| false, false)) | |
| drm_dbg_kms(display->drm, | |
| "[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n", | |
| connector->base.id, connector->name); | |
| } | |
| static void intel_ddi_disable(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *old_crtc_state, | |
| const struct drm_connector_state *old_conn_state) | |
| { | |
| intel_tc_port_link_cancel_reset_work(enc_to_dig_port(encoder)); | |
| intel_hdcp_disable(to_intel_connector(old_conn_state->connector)); | |
| if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI)) | |
| intel_ddi_disable_hdmi(state, encoder, old_crtc_state, | |
| old_conn_state); | |
| else | |
| intel_ddi_disable_dp(state, encoder, old_crtc_state, | |
| old_conn_state); | |
| } | |
| static void intel_ddi_update_pipe_dp(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| intel_ddi_set_dp_msa(crtc_state, conn_state); | |
| intel_dp_set_infoframes(encoder, true, crtc_state, conn_state); | |
| intel_backlight_update(state, encoder, crtc_state, conn_state); | |
| drm_connector_update_privacy_screen(conn_state); | |
| } | |
| static void intel_ddi_update_pipe_hdmi(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| intel_hdmi_fastset_infoframes(encoder, crtc_state, conn_state); | |
| } | |
| void intel_ddi_update_pipe(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) && | |
| !intel_encoder_is_mst(encoder)) | |
| intel_ddi_update_pipe_dp(state, encoder, crtc_state, | |
| conn_state); | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) | |
| intel_ddi_update_pipe_hdmi(encoder, crtc_state, | |
| conn_state); | |
| intel_hdcp_update_pipe(state, encoder, crtc_state, conn_state); | |
| } | |
| void intel_ddi_update_active_dpll(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| struct intel_crtc *crtc) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_crtc_state *crtc_state = | |
| intel_atomic_get_new_crtc_state(state, crtc); | |
| struct intel_crtc *pipe_crtc; | |
| /* FIXME: Add NVL+ and DG2 pll_mgr */ | |
| if (!intel_encoder_is_tc(encoder) || !display->dpll.mgr) | |
| return; | |
| for_each_intel_crtc_in_pipe_mask(display, pipe_crtc, | |
| intel_crtc_joined_pipe_mask(crtc_state)) | |
| intel_dpll_update_active(state, pipe_crtc, encoder); | |
| } | |
| /* | |
| * Note: Also called from the ->pre_pll_enable of the first active MST stream | |
| * encoder on its primary encoder. See also the comment for | |
| * intel_ddi_pre_enable(). | |
| */ | |
| static void | |
| intel_ddi_pre_pll_enable(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state, | |
| const struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| bool is_tc_port = intel_encoder_is_tc(encoder); | |
| if (is_tc_port) { | |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); | |
| intel_tc_port_get_link(dig_port, crtc_state->lane_count); | |
| intel_ddi_update_active_dpll(state, encoder, crtc); | |
| } | |
| main_link_aux_power_domain_get(dig_port, crtc_state); | |
| if (is_tc_port && !intel_tc_port_in_tbt_alt_mode(dig_port)) | |
| /* | |
| * Program the lane count for static/dynamic connections on | |
| * Type-C ports. Skip this step for TBT. | |
| */ | |
| intel_tc_port_set_fia_lane_count(dig_port, crtc_state->lane_count); | |
| else if (display->platform.geminilake || display->platform.broxton) | |
| bxt_dpio_phy_set_lane_optim_mask(encoder, | |
| crtc_state->lane_lat_optim_mask); | |
| /* | |
| * There is no direct connection between the PLL and PPS, however | |
| * enabling PPS before PLL is required to avoid PLL/DDI BUF timeouts | |
| * during system resume. Do that matching the Bspec order as well. | |
| */ | |
| if (DISPLAY_VER(display) >= 14) | |
| intel_pps_on(&dig_port->dp); | |
| } | |
| static void adlp_tbt_to_dp_alt_switch_wa(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum tc_port tc_port = intel_encoder_to_tc(encoder); | |
| int ln; | |
| for (ln = 0; ln < 2; ln++) | |
| intel_dkl_phy_rmw(display, DKL_PCS_DW5(tc_port, ln), | |
| DKL_PCS_DW5_CORE_SOFTRESET, 0); | |
| } | |
| static void mtl_ddi_prepare_link_retrain(struct intel_dp *intel_dp, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); | |
| struct intel_encoder *encoder = &dig_port->base; | |
| u32 dp_tp_ctl; | |
| /* | |
| * TODO: To train with only a different voltage swing entry is not | |
| * necessary disable and enable port | |
| */ | |
| dp_tp_ctl = intel_de_read(display, dp_tp_ctl_reg(encoder, crtc_state)); | |
| drm_WARN_ON(display->drm, dp_tp_ctl & DP_TP_CTL_ENABLE); | |
| /* 6.d Configure and enable DP_TP_CTL with link training pattern 1 selected */ | |
| dp_tp_ctl = DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT1; | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) || | |
| intel_dp_is_uhbr(crtc_state)) { | |
| dp_tp_ctl |= DP_TP_CTL_MODE_MST; | |
| } else { | |
| dp_tp_ctl |= DP_TP_CTL_MODE_SST; | |
| if (crtc_state->enhanced_framing) | |
| dp_tp_ctl |= DP_TP_CTL_ENHANCED_FRAME_ENABLE; | |
| } | |
| intel_de_write(display, dp_tp_ctl_reg(encoder, crtc_state), dp_tp_ctl); | |
| intel_de_posting_read(display, dp_tp_ctl_reg(encoder, crtc_state)); | |
| /* 6.f Enable D2D Link */ | |
| mtl_ddi_enable_d2d(encoder); | |
| /* 6.g Configure voltage swing and related IO settings */ | |
| encoder->set_signal_levels(encoder, crtc_state); | |
| /* 6.h Configure PORT_BUF_CTL1 */ | |
| mtl_port_buf_ctl_program(encoder, crtc_state); | |
| /* 6.i Configure and enable DDI_CTL_DE to start sending valid data to port slice */ | |
| if (DISPLAY_VER(display) >= 20) | |
| intel_dp->DP |= XE2LPD_DDI_BUF_D2D_LINK_ENABLE; | |
| intel_ddi_buf_enable(encoder, intel_dp->DP); | |
| intel_dp->DP |= DDI_BUF_CTL_ENABLE; | |
| /* | |
| * 6.k If AUX-Less ALPM is going to be enabled: | |
| * i. Configure PORT_ALPM_CTL and PORT_ALPM_LFPS_CTL here | |
| */ | |
| intel_alpm_port_configure(intel_dp, crtc_state); | |
| /* | |
| * ii. Enable MAC Transmits LFPS in the "PHY Common Control 0" PIPE | |
| * register | |
| */ | |
| intel_lnl_mac_transmit_lfps(encoder, crtc_state); | |
| } | |
| static void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(intel_dp); | |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); | |
| struct intel_encoder *encoder = &dig_port->base; | |
| u32 dp_tp_ctl; | |
| dp_tp_ctl = intel_de_read(display, dp_tp_ctl_reg(encoder, crtc_state)); | |
| drm_WARN_ON(display->drm, dp_tp_ctl & DP_TP_CTL_ENABLE); | |
| dp_tp_ctl = DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT1; | |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) || | |
| intel_dp_is_uhbr(crtc_state)) { | |
| dp_tp_ctl |= DP_TP_CTL_MODE_MST; | |
| } else { | |
| dp_tp_ctl |= DP_TP_CTL_MODE_SST; | |
| if (crtc_state->enhanced_framing) | |
| dp_tp_ctl |= DP_TP_CTL_ENHANCED_FRAME_ENABLE; | |
| } | |
| intel_de_write(display, dp_tp_ctl_reg(encoder, crtc_state), dp_tp_ctl); | |
| intel_de_posting_read(display, dp_tp_ctl_reg(encoder, crtc_state)); | |
| if (display->platform.alderlake_p && | |
| (intel_tc_port_in_dp_alt_mode(dig_port) || intel_tc_port_in_legacy_mode(dig_port))) | |
| adlp_tbt_to_dp_alt_switch_wa(encoder); | |
| intel_ddi_buf_enable(encoder, intel_dp->DP); | |
| intel_dp->DP |= DDI_BUF_CTL_ENABLE; | |
| } | |
| static void intel_ddi_set_link_train(struct intel_dp *intel_dp, | |
| const struct intel_crtc_state *crtc_state, | |
| u8 dp_train_pat) | |
| { | |
| struct intel_display *display = to_intel_display(intel_dp); | |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; | |
| u32 temp; | |
| temp = intel_de_read(display, dp_tp_ctl_reg(encoder, crtc_state)); | |
| temp &= ~DP_TP_CTL_LINK_TRAIN_MASK; | |
| switch (intel_dp_training_pattern_symbol(dp_train_pat)) { | |
| case DP_TRAINING_PATTERN_DISABLE: | |
| temp |= DP_TP_CTL_LINK_TRAIN_NORMAL; | |
| break; | |
| case DP_TRAINING_PATTERN_1: | |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT1; | |
| break; | |
| case DP_TRAINING_PATTERN_2: | |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT2; | |
| break; | |
| case DP_TRAINING_PATTERN_3: | |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT3; | |
| break; | |
| case DP_TRAINING_PATTERN_4: | |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT4; | |
| break; | |
| } | |
| intel_de_write(display, dp_tp_ctl_reg(encoder, crtc_state), temp); | |
| } | |
| static void intel_ddi_set_idle_link_train(struct intel_dp *intel_dp, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(intel_dp); | |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; | |
| enum port port = encoder->port; | |
| intel_de_rmw(display, dp_tp_ctl_reg(encoder, crtc_state), | |
| DP_TP_CTL_LINK_TRAIN_MASK, DP_TP_CTL_LINK_TRAIN_IDLE); | |
| /* | |
| * Until TGL on PORT_A we can have only eDP in SST mode. There the only | |
| * reason we need to set idle transmission mode is to work around a HW | |
| * issue where we enable the pipe while not in idle link-training mode. | |
| * In this case there is requirement to wait for a minimum number of | |
| * idle patterns to be sent. | |
| */ | |
| if (port == PORT_A && DISPLAY_VER(display) < 12) | |
| return; | |
| if (intel_de_wait_for_set_ms(display, | |
| dp_tp_status_reg(encoder, crtc_state), | |
| DP_TP_STATUS_IDLE_DONE, 2)) | |
| drm_err(display->drm, | |
| "Timed out waiting for DP idle patterns\n"); | |
| } | |
| static bool intel_ddi_is_audio_enabled(struct intel_display *display, | |
| enum transcoder cpu_transcoder) | |
| { | |
| if (cpu_transcoder == TRANSCODER_EDP) | |
| return false; | |
| if (!intel_display_power_is_enabled(display, POWER_DOMAIN_AUDIO_MMIO)) | |
| return false; | |
| return intel_de_read(display, HSW_AUD_PIN_ELD_CP_VLD) & | |
| AUDIO_OUTPUT_ENABLE(cpu_transcoder); | |
| } | |
| static int tgl_ddi_min_voltage_level(const struct intel_crtc_state *crtc_state) | |
| { | |
| if (crtc_state->port_clock > 594000) | |
| return 2; | |
| else | |
| return 0; | |
| } | |
| static int jsl_ddi_min_voltage_level(const struct intel_crtc_state *crtc_state) | |
| { | |
| if (crtc_state->port_clock > 594000) | |
| return 3; | |
| else | |
| return 0; | |
| } | |
| static int icl_ddi_min_voltage_level(const struct intel_crtc_state *crtc_state) | |
| { | |
| if (crtc_state->port_clock > 594000) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| void intel_ddi_compute_min_voltage_level(struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| if (DISPLAY_VER(display) >= 14) | |
| crtc_state->min_voltage_level = icl_ddi_min_voltage_level(crtc_state); | |
| else if (DISPLAY_VER(display) >= 12) | |
| crtc_state->min_voltage_level = tgl_ddi_min_voltage_level(crtc_state); | |
| else if (display->platform.jasperlake || display->platform.elkhartlake) | |
| crtc_state->min_voltage_level = jsl_ddi_min_voltage_level(crtc_state); | |
| else if (DISPLAY_VER(display) >= 11) | |
| crtc_state->min_voltage_level = icl_ddi_min_voltage_level(crtc_state); | |
| } | |
| static enum transcoder bdw_transcoder_master_readout(struct intel_display *display, | |
| enum transcoder cpu_transcoder) | |
| { | |
| u32 master_select; | |
| if (DISPLAY_VER(display) >= 11) { | |
| u32 ctl2 = intel_de_read(display, | |
| TRANS_DDI_FUNC_CTL2(display, cpu_transcoder)); | |
| if ((ctl2 & PORT_SYNC_MODE_ENABLE) == 0) | |
| return INVALID_TRANSCODER; | |
| master_select = REG_FIELD_GET(PORT_SYNC_MODE_MASTER_SELECT_MASK, ctl2); | |
| } else { | |
| u32 ctl = intel_de_read(display, | |
| TRANS_DDI_FUNC_CTL(display, cpu_transcoder)); | |
| if ((ctl & TRANS_DDI_PORT_SYNC_ENABLE) == 0) | |
| return INVALID_TRANSCODER; | |
| master_select = REG_FIELD_GET(TRANS_DDI_PORT_SYNC_MASTER_SELECT_MASK, ctl); | |
| } | |
| if (master_select == 0) | |
| return TRANSCODER_EDP; | |
| else | |
| return master_select - 1; | |
| } | |
| static void bdw_get_trans_port_sync_config(struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(crtc_state); | |
| u32 transcoders = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) | | |
| BIT(TRANSCODER_C) | BIT(TRANSCODER_D); | |
| enum transcoder cpu_transcoder; | |
| crtc_state->master_transcoder = | |
| bdw_transcoder_master_readout(display, crtc_state->cpu_transcoder); | |
| for_each_cpu_transcoder_masked(display, cpu_transcoder, transcoders) { | |
| enum intel_display_power_domain power_domain; | |
| struct ref_tracker *trans_wakeref; | |
| power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder); | |
| trans_wakeref = intel_display_power_get_if_enabled(display, | |
| power_domain); | |
| if (!trans_wakeref) | |
| continue; | |
| if (bdw_transcoder_master_readout(display, cpu_transcoder) == | |
| crtc_state->cpu_transcoder) | |
| crtc_state->sync_mode_slaves_mask |= BIT(cpu_transcoder); | |
| intel_display_power_put(display, power_domain, trans_wakeref); | |
| } | |
| drm_WARN_ON(display->drm, | |
| crtc_state->master_transcoder != INVALID_TRANSCODER && | |
| crtc_state->sync_mode_slaves_mask); | |
| } | |
| static void intel_ddi_read_func_ctl_dvi(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| u32 ddi_func_ctl) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| crtc_state->output_types |= BIT(INTEL_OUTPUT_HDMI); | |
| if (DISPLAY_VER(display) >= 14) | |
| crtc_state->lane_count = | |
| ((ddi_func_ctl & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; | |
| else | |
| crtc_state->lane_count = 4; | |
| } | |
| static void intel_ddi_read_func_ctl_hdmi(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| u32 ddi_func_ctl) | |
| { | |
| crtc_state->has_hdmi_sink = true; | |
| crtc_state->infoframes.enable |= | |
| intel_hdmi_infoframes_enabled(encoder, crtc_state); | |
| if (crtc_state->infoframes.enable) | |
| crtc_state->has_infoframe = true; | |
| if (ddi_func_ctl & TRANS_DDI_HDMI_SCRAMBLING) | |
| crtc_state->hdmi_scrambling = true; | |
| if (ddi_func_ctl & TRANS_DDI_HIGH_TMDS_CHAR_RATE) | |
| crtc_state->hdmi_high_tmds_clock_ratio = true; | |
| intel_ddi_read_func_ctl_dvi(encoder, crtc_state, ddi_func_ctl); | |
| } | |
| static void intel_ddi_read_func_ctl_fdi(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| u32 ddi_func_ctl) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| crtc_state->output_types |= BIT(INTEL_OUTPUT_ANALOG); | |
| crtc_state->enhanced_framing = | |
| intel_de_read(display, dp_tp_ctl_reg(encoder, crtc_state)) & | |
| DP_TP_CTL_ENHANCED_FRAME_ENABLE; | |
| } | |
| static void intel_ddi_read_func_ctl_dp_sst(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| u32 ddi_func_ctl) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| if (encoder->type == INTEL_OUTPUT_EDP) | |
| crtc_state->output_types |= BIT(INTEL_OUTPUT_EDP); | |
| else | |
| crtc_state->output_types |= BIT(INTEL_OUTPUT_DP); | |
| crtc_state->lane_count = | |
| ((ddi_func_ctl & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; | |
| if (DISPLAY_VER(display) >= 12 && | |
| (ddi_func_ctl & TRANS_DDI_MODE_SELECT_MASK) == TRANS_DDI_MODE_SELECT_FDI_OR_128B132B) | |
| crtc_state->mst_master_transcoder = | |
| REG_FIELD_GET(TRANS_DDI_MST_TRANSPORT_SELECT_MASK, ddi_func_ctl); | |
| intel_cpu_transcoder_get_m1_n1(crtc, cpu_transcoder, &crtc_state->dp_m_n); | |
| intel_cpu_transcoder_get_m2_n2(crtc, cpu_transcoder, &crtc_state->dp_m2_n2); | |
| crtc_state->enhanced_framing = | |
| intel_de_read(display, dp_tp_ctl_reg(encoder, crtc_state)) & | |
| DP_TP_CTL_ENHANCED_FRAME_ENABLE; | |
| if (DISPLAY_VER(display) >= 11) | |
| crtc_state->fec_enable = | |
| intel_de_read(display, | |
| dp_tp_ctl_reg(encoder, crtc_state)) & DP_TP_CTL_FEC_ENABLE; | |
| if (intel_lspcon_active(dig_port) && intel_dp_has_hdmi_sink(&dig_port->dp)) | |
| crtc_state->infoframes.enable |= | |
| intel_lspcon_infoframes_enabled(encoder, crtc_state); | |
| else | |
| crtc_state->infoframes.enable |= | |
| intel_hdmi_infoframes_enabled(encoder, crtc_state); | |
| } | |
| static void intel_ddi_read_func_ctl_dp_mst(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| u32 ddi_func_ctl) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); | |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; | |
| crtc_state->output_types |= BIT(INTEL_OUTPUT_DP_MST); | |
| crtc_state->lane_count = | |
| ((ddi_func_ctl & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; | |
| if (DISPLAY_VER(display) >= 12) | |
| crtc_state->mst_master_transcoder = | |
| REG_FIELD_GET(TRANS_DDI_MST_TRANSPORT_SELECT_MASK, ddi_func_ctl); | |
| intel_cpu_transcoder_get_m1_n1(crtc, cpu_transcoder, &crtc_state->dp_m_n); | |
| if (DISPLAY_VER(display) >= 11) | |
| crtc_state->fec_enable = | |
| intel_de_read(display, | |
| dp_tp_ctl_reg(encoder, crtc_state)) & DP_TP_CTL_FEC_ENABLE; | |
| crtc_state->infoframes.enable |= | |
| intel_hdmi_infoframes_enabled(encoder, crtc_state); | |
| } | |
| static void intel_ddi_read_func_ctl(struct intel_encoder *encoder, | |
| struct intel_crtc_state *pipe_config) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; | |
| u32 ddi_func_ctl, ddi_mode, flags = 0; | |
| ddi_func_ctl = intel_de_read(display, TRANS_DDI_FUNC_CTL(display, cpu_transcoder)); | |
| if (ddi_func_ctl & TRANS_DDI_PHSYNC) | |
| flags |= DRM_MODE_FLAG_PHSYNC; | |
| else | |
| flags |= DRM_MODE_FLAG_NHSYNC; | |
| if (ddi_func_ctl & TRANS_DDI_PVSYNC) | |
| flags |= DRM_MODE_FLAG_PVSYNC; | |
| else | |
| flags |= DRM_MODE_FLAG_NVSYNC; | |
| pipe_config->hw.adjusted_mode.flags |= flags; | |
| switch (ddi_func_ctl & TRANS_DDI_BPC_MASK) { | |
| case TRANS_DDI_BPC_6: | |
| pipe_config->pipe_bpp = 18; | |
| break; | |
| case TRANS_DDI_BPC_8: | |
| pipe_config->pipe_bpp = 24; | |
| break; | |
| case TRANS_DDI_BPC_10: | |
| pipe_config->pipe_bpp = 30; | |
| break; | |
| case TRANS_DDI_BPC_12: | |
| pipe_config->pipe_bpp = 36; | |
| break; | |
| default: | |
| break; | |
| } | |
| ddi_mode = ddi_func_ctl & TRANS_DDI_MODE_SELECT_MASK; | |
| if (ddi_mode == TRANS_DDI_MODE_SELECT_HDMI) { | |
| intel_ddi_read_func_ctl_hdmi(encoder, pipe_config, ddi_func_ctl); | |
| } else if (ddi_mode == TRANS_DDI_MODE_SELECT_DVI) { | |
| intel_ddi_read_func_ctl_dvi(encoder, pipe_config, ddi_func_ctl); | |
| } else if (ddi_mode == TRANS_DDI_MODE_SELECT_FDI_OR_128B132B && !HAS_DP20(display)) { | |
| intel_ddi_read_func_ctl_fdi(encoder, pipe_config, ddi_func_ctl); | |
| } else if (ddi_mode == TRANS_DDI_MODE_SELECT_DP_SST) { | |
| intel_ddi_read_func_ctl_dp_sst(encoder, pipe_config, ddi_func_ctl); | |
| } else if (ddi_mode == TRANS_DDI_MODE_SELECT_DP_MST) { | |
| intel_ddi_read_func_ctl_dp_mst(encoder, pipe_config, ddi_func_ctl); | |
| } else if (ddi_mode == TRANS_DDI_MODE_SELECT_FDI_OR_128B132B && HAS_DP20(display)) { | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| /* | |
| * If this is true, we know we're being called from mst stream | |
| * encoder's ->get_config(). | |
| */ | |
| if (intel_dp_mst_active_streams(intel_dp)) | |
| intel_ddi_read_func_ctl_dp_mst(encoder, pipe_config, ddi_func_ctl); | |
| else | |
| intel_ddi_read_func_ctl_dp_sst(encoder, pipe_config, ddi_func_ctl); | |
| } | |
| } | |
| /* | |
| * Note: Also called from the ->get_config of the MST stream encoders on their | |
| * primary encoder, via the platform specific hooks here. See also the comment | |
| * for intel_ddi_pre_enable(). | |
| */ | |
| static void intel_ddi_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *pipe_config) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; | |
| /* XXX: DSI transcoder paranoia */ | |
| if (drm_WARN_ON(display->drm, transcoder_is_dsi(cpu_transcoder))) | |
| return; | |
| intel_ddi_read_func_ctl(encoder, pipe_config); | |
| intel_ddi_mso_get_config(encoder, pipe_config); | |
| pipe_config->has_audio = | |
| intel_ddi_is_audio_enabled(display, cpu_transcoder); | |
| if (encoder->type == INTEL_OUTPUT_EDP) | |
| intel_edp_fixup_vbt_bpp(encoder, pipe_config->pipe_bpp); | |
| ddi_dotclock_get(pipe_config); | |
| if (display->platform.geminilake || display->platform.broxton) | |
| pipe_config->lane_lat_optim_mask = | |
| bxt_dpio_phy_get_lane_lat_optim_mask(encoder); | |
| intel_ddi_compute_min_voltage_level(pipe_config); | |
| intel_hdmi_read_gcp_infoframe(encoder, pipe_config); | |
| intel_read_infoframe(encoder, pipe_config, | |
| HDMI_INFOFRAME_TYPE_AVI, | |
| &pipe_config->infoframes.avi); | |
| intel_read_infoframe(encoder, pipe_config, | |
| HDMI_INFOFRAME_TYPE_SPD, | |
| &pipe_config->infoframes.spd); | |
| intel_read_infoframe(encoder, pipe_config, | |
| HDMI_INFOFRAME_TYPE_VENDOR, | |
| &pipe_config->infoframes.hdmi); | |
| intel_read_infoframe(encoder, pipe_config, | |
| HDMI_INFOFRAME_TYPE_DRM, | |
| &pipe_config->infoframes.drm); | |
| if (DISPLAY_VER(display) >= 8) | |
| bdw_get_trans_port_sync_config(pipe_config); | |
| intel_psr_get_config(encoder, pipe_config); | |
| intel_read_dp_sdp(encoder, pipe_config, HDMI_PACKET_TYPE_GAMUT_METADATA); | |
| intel_read_dp_sdp(encoder, pipe_config, DP_SDP_VSC); | |
| intel_read_dp_sdp(encoder, pipe_config, DP_SDP_ADAPTIVE_SYNC); | |
| intel_audio_codec_get_config(encoder, pipe_config); | |
| } | |
| void intel_ddi_get_clock(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| struct intel_dpll *pll) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum icl_port_dpll_id port_dpll_id = ICL_PORT_DPLL_DEFAULT; | |
| struct icl_port_dpll *port_dpll = &crtc_state->icl_port_dplls[port_dpll_id]; | |
| bool pll_active; | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| port_dpll->pll = pll; | |
| pll_active = intel_dpll_get_hw_state(display, pll, &port_dpll->hw_state); | |
| drm_WARN_ON(display->drm, !pll_active); | |
| icl_set_active_port_dpll(crtc_state, port_dpll_id); | |
| crtc_state->port_clock = intel_dpll_get_freq(display, crtc_state->intel_dpll, | |
| &crtc_state->dpll_hw_state); | |
| } | |
| static bool icl_ddi_tc_pll_is_tbt(const struct intel_dpll *pll) | |
| { | |
| return pll->info->id == DPLL_ID_ICL_TBTPLL; | |
| } | |
| static void mtl_ddi_cx0_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| enum icl_port_dpll_id port_dpll_id, | |
| enum intel_dpll_id pll_id) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct icl_port_dpll *port_dpll; | |
| struct intel_dpll *pll; | |
| bool pll_active; | |
| port_dpll = &crtc_state->icl_port_dplls[port_dpll_id]; | |
| pll = intel_get_dpll_by_id(display, pll_id); | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| port_dpll->pll = pll; | |
| pll_active = intel_dpll_get_hw_state(display, pll, &port_dpll->hw_state); | |
| drm_WARN_ON(display->drm, !pll_active); | |
| icl_set_active_port_dpll(crtc_state, port_dpll_id); | |
| if (icl_ddi_tc_pll_is_tbt(crtc_state->intel_dpll)) | |
| crtc_state->port_clock = intel_mtl_tbt_calc_port_clock(encoder); | |
| else | |
| crtc_state->port_clock = intel_dpll_get_freq(display, crtc_state->intel_dpll, | |
| &crtc_state->dpll_hw_state); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| /* | |
| * Get the configuration for either a port using a C10 PHY PLL, or a port using a | |
| * C20 PHY PLL in the cases of: | |
| * - BMG port A/B | |
| * - PTL port B eDP over TypeC PHY | |
| */ | |
| static void mtl_ddi_non_tc_phy_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| mtl_ddi_cx0_get_config(encoder, crtc_state, ICL_PORT_DPLL_DEFAULT, | |
| mtl_port_to_pll_id(display, encoder->port)); | |
| } | |
| static void mtl_ddi_tc_phy_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| if (intel_tc_port_in_tbt_alt_mode(enc_to_dig_port(encoder))) | |
| mtl_ddi_cx0_get_config(encoder, crtc_state, ICL_PORT_DPLL_DEFAULT, | |
| DPLL_ID_ICL_TBTPLL); | |
| else | |
| mtl_ddi_cx0_get_config(encoder, crtc_state, ICL_PORT_DPLL_MG_PHY, | |
| mtl_port_to_pll_id(display, encoder->port)); | |
| } | |
| static void dg2_ddi_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| intel_mpllb_readout_hw_state(encoder, &crtc_state->dpll_hw_state.mpllb); | |
| crtc_state->port_clock = intel_mpllb_calc_port_clock(encoder, &crtc_state->dpll_hw_state.mpllb); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| static void adls_ddi_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| intel_ddi_get_clock(encoder, crtc_state, adls_ddi_get_pll(encoder)); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| static void rkl_ddi_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| intel_ddi_get_clock(encoder, crtc_state, rkl_ddi_get_pll(encoder)); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| static void dg1_ddi_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| intel_ddi_get_clock(encoder, crtc_state, dg1_ddi_get_pll(encoder)); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| static void icl_ddi_combo_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| intel_ddi_get_clock(encoder, crtc_state, icl_ddi_combo_get_pll(encoder)); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| static enum icl_port_dpll_id | |
| icl_ddi_tc_port_pll_type(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| const struct intel_dpll *pll = crtc_state->intel_dpll; | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return ICL_PORT_DPLL_DEFAULT; | |
| if (icl_ddi_tc_pll_is_tbt(pll)) | |
| return ICL_PORT_DPLL_DEFAULT; | |
| else | |
| return ICL_PORT_DPLL_MG_PHY; | |
| } | |
| enum icl_port_dpll_id | |
| intel_ddi_port_pll_type(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| if (!encoder->port_pll_type) | |
| return ICL_PORT_DPLL_DEFAULT; | |
| return encoder->port_pll_type(encoder, crtc_state); | |
| } | |
| static void icl_ddi_tc_get_clock(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| struct intel_dpll *pll) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| enum icl_port_dpll_id port_dpll_id; | |
| struct icl_port_dpll *port_dpll; | |
| bool pll_active; | |
| if (drm_WARN_ON(display->drm, !pll)) | |
| return; | |
| if (icl_ddi_tc_pll_is_tbt(pll)) | |
| port_dpll_id = ICL_PORT_DPLL_DEFAULT; | |
| else | |
| port_dpll_id = ICL_PORT_DPLL_MG_PHY; | |
| port_dpll = &crtc_state->icl_port_dplls[port_dpll_id]; | |
| port_dpll->pll = pll; | |
| pll_active = intel_dpll_get_hw_state(display, pll, &port_dpll->hw_state); | |
| drm_WARN_ON(display->drm, !pll_active); | |
| icl_set_active_port_dpll(crtc_state, port_dpll_id); | |
| if (icl_ddi_tc_pll_is_tbt(crtc_state->intel_dpll)) | |
| crtc_state->port_clock = icl_calc_tbt_pll_link(display, encoder->port); | |
| else | |
| crtc_state->port_clock = intel_dpll_get_freq(display, crtc_state->intel_dpll, | |
| &crtc_state->dpll_hw_state); | |
| } | |
| static void icl_ddi_tc_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| icl_ddi_tc_get_clock(encoder, crtc_state, icl_ddi_tc_get_pll(encoder)); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| static void bxt_ddi_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| intel_ddi_get_clock(encoder, crtc_state, bxt_ddi_get_pll(encoder)); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| static void skl_ddi_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| intel_ddi_get_clock(encoder, crtc_state, skl_ddi_get_pll(encoder)); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| void hsw_ddi_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| intel_ddi_get_clock(encoder, crtc_state, hsw_ddi_get_pll(encoder)); | |
| intel_ddi_get_config(encoder, crtc_state); | |
| } | |
| static void intel_ddi_sync_state(struct intel_encoder *encoder, | |
| const struct intel_crtc_state *crtc_state) | |
| { | |
| if (intel_encoder_is_tc(encoder)) | |
| intel_tc_port_sanitize_mode(enc_to_dig_port(encoder), | |
| crtc_state); | |
| if ((crtc_state && intel_crtc_has_dp_encoder(crtc_state)) || | |
| (!crtc_state && intel_encoder_is_dp(encoder))) | |
| intel_dp_sync_state(encoder, crtc_state); | |
| } | |
| static bool intel_ddi_initial_fastset_check(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| bool fastset = true; | |
| if (intel_encoder_is_tc(encoder)) { | |
| drm_dbg_kms(display->drm, "[ENCODER:%d:%s] Forcing full modeset to compute TC port DPLLs\n", | |
| encoder->base.base.id, encoder->base.name); | |
| crtc_state->uapi.mode_changed = true; | |
| fastset = false; | |
| } | |
| if (intel_crtc_has_dp_encoder(crtc_state) && | |
| !intel_dp_initial_fastset_check(encoder, crtc_state)) | |
| fastset = false; | |
| return fastset; | |
| } | |
| static enum intel_output_type | |
| intel_ddi_compute_output_type(struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| struct drm_connector_state *conn_state) | |
| { | |
| switch (conn_state->connector->connector_type) { | |
| case DRM_MODE_CONNECTOR_HDMIA: | |
| return INTEL_OUTPUT_HDMI; | |
| case DRM_MODE_CONNECTOR_eDP: | |
| return INTEL_OUTPUT_EDP; | |
| case DRM_MODE_CONNECTOR_DisplayPort: | |
| return INTEL_OUTPUT_DP; | |
| default: | |
| MISSING_CASE(conn_state->connector->connector_type); | |
| return INTEL_OUTPUT_UNUSED; | |
| } | |
| } | |
| static int intel_ddi_compute_config(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| struct intel_crtc_state *pipe_config, | |
| struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); | |
| enum port port = encoder->port; | |
| int ret; | |
| if (HAS_TRANSCODER(display, TRANSCODER_EDP) && port == PORT_A) | |
| pipe_config->cpu_transcoder = TRANSCODER_EDP; | |
| if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI)) { | |
| pipe_config->has_hdmi_sink = | |
| intel_hdmi_compute_has_hdmi_sink(encoder, pipe_config, conn_state); | |
| ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state); | |
| } else { | |
| ret = intel_dp_compute_config(state, encoder, pipe_config, conn_state); | |
| } | |
| if (ret) | |
| return ret; | |
| if (display->platform.haswell && crtc->pipe == PIPE_A && | |
| pipe_config->cpu_transcoder == TRANSCODER_EDP) | |
| pipe_config->pch_pfit.force_thru = | |
| pipe_config->pch_pfit.enabled || | |
| pipe_config->crc_enabled; | |
| if (display->platform.geminilake || display->platform.broxton) | |
| pipe_config->lane_lat_optim_mask = | |
| bxt_dpio_phy_calc_lane_lat_optim_mask(pipe_config->lane_count); | |
| intel_ddi_compute_min_voltage_level(pipe_config); | |
| return 0; | |
| } | |
| static bool mode_equal(const struct drm_display_mode *mode1, | |
| const struct drm_display_mode *mode2) | |
| { | |
| return drm_mode_match(mode1, mode2, | |
| DRM_MODE_MATCH_TIMINGS | | |
| DRM_MODE_MATCH_FLAGS | | |
| DRM_MODE_MATCH_3D_FLAGS) && | |
| mode1->clock == mode2->clock; /* we want an exact match */ | |
| } | |
| static bool m_n_equal(const struct intel_link_m_n *m_n_1, | |
| const struct intel_link_m_n *m_n_2) | |
| { | |
| return m_n_1->tu == m_n_2->tu && | |
| m_n_1->data_m == m_n_2->data_m && | |
| m_n_1->data_n == m_n_2->data_n && | |
| m_n_1->link_m == m_n_2->link_m && | |
| m_n_1->link_n == m_n_2->link_n; | |
| } | |
| static bool crtcs_port_sync_compatible(const struct intel_crtc_state *crtc_state1, | |
| const struct intel_crtc_state *crtc_state2) | |
| { | |
| /* | |
| * FIXME the modeset sequence is currently wrong and | |
| * can't deal with joiner + port sync at the same time. | |
| */ | |
| return crtc_state1->hw.active && crtc_state2->hw.active && | |
| !crtc_state1->joiner_pipes && !crtc_state2->joiner_pipes && | |
| crtc_state1->output_types == crtc_state2->output_types && | |
| crtc_state1->output_format == crtc_state2->output_format && | |
| crtc_state1->lane_count == crtc_state2->lane_count && | |
| crtc_state1->port_clock == crtc_state2->port_clock && | |
| mode_equal(&crtc_state1->hw.adjusted_mode, | |
| &crtc_state2->hw.adjusted_mode) && | |
| m_n_equal(&crtc_state1->dp_m_n, &crtc_state2->dp_m_n); | |
| } | |
| static u16 | |
| intel_ddi_port_sync_transcoders(const struct intel_crtc_state *ref_crtc_state, | |
| int tile_group_id) | |
| { | |
| struct intel_display *display = to_intel_display(ref_crtc_state); | |
| struct drm_connector *connector; | |
| const struct drm_connector_state *conn_state; | |
| struct intel_atomic_state *state = | |
| to_intel_atomic_state(ref_crtc_state->uapi.state); | |
| u16 transcoders = 0; | |
| int i; | |
| /* | |
| * We don't enable port sync on BDW due to missing w/as and | |
| * due to not having adjusted the modeset sequence appropriately. | |
| * From, xe3lpd onwards we have defeatured this with reference to | |
| * Wa_16024710867 | |
| */ | |
| if (!IS_DISPLAY_VER(display, 9, 30)) | |
| return 0; | |
| if (!intel_crtc_has_type(ref_crtc_state, INTEL_OUTPUT_DP)) | |
| return 0; | |
| for_each_new_connector_in_state(&state->base, connector, conn_state, i) { | |
| struct intel_crtc *crtc = to_intel_crtc(conn_state->crtc); | |
| const struct intel_crtc_state *crtc_state; | |
| if (!crtc) | |
| continue; | |
| if (!connector->has_tile || | |
| connector->tile_group->id != | |
| tile_group_id) | |
| continue; | |
| crtc_state = intel_atomic_get_new_crtc_state(state, | |
| crtc); | |
| if (!crtcs_port_sync_compatible(ref_crtc_state, | |
| crtc_state)) | |
| continue; | |
| transcoders |= BIT(crtc_state->cpu_transcoder); | |
| } | |
| return transcoders; | |
| } | |
| static int intel_ddi_compute_config_late(struct intel_atomic_state *state, | |
| struct intel_encoder *encoder, | |
| struct intel_crtc_state *crtc_state, | |
| struct drm_connector_state *conn_state) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct drm_connector *connector = conn_state->connector; | |
| u16 port_sync_transcoders = 0; | |
| int ret = 0; | |
| if (intel_crtc_has_dp_encoder(crtc_state)) | |
| ret = intel_dp_compute_config_late(encoder, crtc_state, conn_state); | |
| if (ret) | |
| return ret; | |
| drm_dbg_kms(display->drm, "[ENCODER:%d:%s] [CRTC:%d:%s]\n", | |
| encoder->base.base.id, encoder->base.name, | |
| crtc_state->uapi.crtc->base.id, crtc_state->uapi.crtc->name); | |
| if (connector->has_tile) | |
| port_sync_transcoders = intel_ddi_port_sync_transcoders(crtc_state, | |
| connector->tile_group->id); | |
| /* | |
| * EDP Transcoders cannot be ensalved | |
| * make them a master always when present | |
| */ | |
| if (port_sync_transcoders & BIT(TRANSCODER_EDP)) | |
| crtc_state->master_transcoder = TRANSCODER_EDP; | |
| else | |
| crtc_state->master_transcoder = ffs(port_sync_transcoders) - 1; | |
| if (crtc_state->master_transcoder == crtc_state->cpu_transcoder) { | |
| crtc_state->master_transcoder = INVALID_TRANSCODER; | |
| crtc_state->sync_mode_slaves_mask = | |
| port_sync_transcoders & ~BIT(crtc_state->cpu_transcoder); | |
| } | |
| return 0; | |
| } | |
| static void intel_ddi_encoder_destroy(struct drm_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder->dev); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(to_intel_encoder(encoder)); | |
| intel_dp_encoder_flush_work(encoder); | |
| if (intel_encoder_is_tc(&dig_port->base)) | |
| intel_tc_port_cleanup(dig_port); | |
| intel_display_power_flush_work(display); | |
| drm_encoder_cleanup(encoder); | |
| kfree(dig_port->hdcp.port_data.streams); | |
| intel_dp_link_cleanup(&dig_port->dp); | |
| kfree(dig_port); | |
| } | |
| static void intel_ddi_encoder_reset(struct drm_encoder *encoder) | |
| { | |
| struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(encoder)); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(to_intel_encoder(encoder)); | |
| intel_dp->reset_link_params = true; | |
| intel_dp_invalidate_source_oui(intel_dp); | |
| intel_pps_encoder_reset(intel_dp); | |
| if (intel_encoder_is_tc(&dig_port->base)) | |
| intel_tc_port_init_mode(dig_port); | |
| } | |
| static int intel_ddi_encoder_late_register(struct drm_encoder *_encoder) | |
| { | |
| struct intel_encoder *encoder = to_intel_encoder(_encoder); | |
| intel_tc_port_link_reset(enc_to_dig_port(encoder)); | |
| return 0; | |
| } | |
| static const struct drm_encoder_funcs intel_ddi_funcs = { | |
| .reset = intel_ddi_encoder_reset, | |
| .destroy = intel_ddi_encoder_destroy, | |
| .late_register = intel_ddi_encoder_late_register, | |
| }; | |
| static int intel_ddi_init_dp_connector(struct intel_digital_port *dig_port) | |
| { | |
| struct intel_display *display = to_intel_display(dig_port); | |
| struct intel_connector *connector; | |
| enum port port = dig_port->base.port; | |
| int err; | |
| connector = intel_connector_alloc(); | |
| if (!connector) | |
| return -ENOMEM; | |
| err = intel_dp_link_init(&dig_port->dp); | |
| if (err) | |
| goto err_dp_init; | |
| dig_port->dp.output_reg = DDI_BUF_CTL(port); | |
| if (DISPLAY_VER(display) >= 14) | |
| dig_port->dp.prepare_link_retrain = mtl_ddi_prepare_link_retrain; | |
| else | |
| dig_port->dp.prepare_link_retrain = intel_ddi_prepare_link_retrain; | |
| dig_port->dp.set_link_train = intel_ddi_set_link_train; | |
| dig_port->dp.set_idle_link_train = intel_ddi_set_idle_link_train; | |
| dig_port->dp.voltage_max = intel_ddi_dp_voltage_max; | |
| dig_port->dp.preemph_max = intel_ddi_dp_preemph_max; | |
| if (!intel_dp_init_connector(dig_port, connector)) { | |
| err = -EINVAL; | |
| goto err_init_connector; | |
| } | |
| if (dig_port->base.type == INTEL_OUTPUT_EDP) { | |
| struct drm_privacy_screen *privacy_screen; | |
| privacy_screen = drm_privacy_screen_get(display->drm->dev, NULL); | |
| if (!IS_ERR(privacy_screen)) { | |
| drm_connector_attach_privacy_screen_provider(&connector->base, | |
| privacy_screen); | |
| } else if (PTR_ERR(privacy_screen) != -ENODEV) { | |
| drm_warn(display->drm, "Error getting privacy-screen\n"); | |
| } | |
| } | |
| return 0; | |
| err_init_connector: | |
| intel_dp_link_cleanup(&dig_port->dp); | |
| err_dp_init: | |
| kfree(connector); | |
| return err; | |
| } | |
| static void intel_ddi_cleanup_dp_connector(struct intel_digital_port *dig_port) | |
| { | |
| struct intel_dp *intel_dp = &dig_port->dp; | |
| struct intel_connector *connector = intel_dp->attached_connector; | |
| intel_dp_cleanup_connector(dig_port, connector); | |
| intel_dp_link_cleanup(intel_dp); | |
| kfree(connector); | |
| } | |
| static int intel_hdmi_reset_link(struct intel_encoder *encoder, | |
| struct drm_modeset_acquire_ctx *ctx) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_hdmi *hdmi = enc_to_intel_hdmi(encoder); | |
| struct intel_connector *connector = hdmi->attached_connector; | |
| struct i2c_adapter *ddc = connector->base.ddc; | |
| struct drm_connector_state *conn_state; | |
| struct intel_crtc_state *crtc_state; | |
| struct intel_crtc *crtc; | |
| u8 config; | |
| int ret; | |
| if (connector->base.status != connector_status_connected) | |
| return 0; | |
| ret = drm_modeset_lock(&display->drm->mode_config.connection_mutex, | |
| ctx); | |
| if (ret) | |
| return ret; | |
| conn_state = connector->base.state; | |
| crtc = to_intel_crtc(conn_state->crtc); | |
| if (!crtc) | |
| return 0; | |
| ret = drm_modeset_lock(&crtc->base.mutex, ctx); | |
| if (ret) | |
| return ret; | |
| crtc_state = to_intel_crtc_state(crtc->base.state); | |
| drm_WARN_ON(display->drm, | |
| !intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)); | |
| if (!crtc_state->hw.active) | |
| return 0; | |
| if (!crtc_state->hdmi_high_tmds_clock_ratio && | |
| !crtc_state->hdmi_scrambling) | |
| return 0; | |
| if (conn_state->commit && | |
| !try_wait_for_completion(&conn_state->commit->hw_done)) | |
| return 0; | |
| ret = drm_scdc_readb(ddc, SCDC_TMDS_CONFIG, &config); | |
| if (ret < 0) { | |
| drm_err(display->drm, "[CONNECTOR:%d:%s] Failed to read TMDS config: %d\n", | |
| connector->base.base.id, connector->base.name, ret); | |
| return 0; | |
| } | |
| if (!!(config & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40) == | |
| crtc_state->hdmi_high_tmds_clock_ratio && | |
| !!(config & SCDC_SCRAMBLING_ENABLE) == | |
| crtc_state->hdmi_scrambling) | |
| return 0; | |
| /* | |
| * HDMI 2.0 says that one should not send scrambled data | |
| * prior to configuring the sink scrambling, and that | |
| * TMDS clock/data transmission should be suspended when | |
| * changing the TMDS clock rate in the sink. So let's | |
| * just do a full modeset here, even though some sinks | |
| * would be perfectly happy if were to just reconfigure | |
| * the SCDC settings on the fly. | |
| */ | |
| return intel_modeset_commit_pipes(display, BIT(crtc->pipe), ctx); | |
| } | |
| static void intel_ddi_link_check(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| /* TODO: Move checking the HDMI link state here as well. */ | |
| drm_WARN_ON(display->drm, !dig_port->dp.attached_connector); | |
| intel_dp_link_check(encoder); | |
| } | |
| static enum intel_hotplug_state | |
| intel_ddi_hotplug(struct intel_encoder *encoder, | |
| struct intel_connector *connector) | |
| { | |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); | |
| struct intel_dp *intel_dp = &dig_port->dp; | |
| bool is_tc = intel_encoder_is_tc(encoder); | |
| struct drm_modeset_acquire_ctx ctx; | |
| enum intel_hotplug_state state; | |
| int ret; | |
| if (intel_dp_test_phy(intel_dp)) | |
| return INTEL_HOTPLUG_UNCHANGED; | |
| state = intel_encoder_hotplug(encoder, connector); | |
| if (!intel_tc_port_link_reset(dig_port)) { | |
| if (connector->base.connector_type == DRM_MODE_CONNECTOR_HDMIA) { | |
| intel_modeset_lock_ctx_retry(&ctx, NULL, 0, ret) | |
| ret = intel_hdmi_reset_link(encoder, &ctx); | |
| drm_WARN_ON(encoder->base.dev, ret); | |
| } else { | |
| intel_dp_check_link_state(intel_dp); | |
| } | |
| } | |
| /* | |
| * Unpowered type-c dongles can take some time to boot and be | |
| * responsible, so here giving some time to those dongles to power up | |
| * and then retrying the probe. | |
| * | |
| * On many platforms the HDMI live state signal is known to be | |
| * unreliable, so we can't use it to detect if a sink is connected or | |
| * not. Instead we detect if it's connected based on whether we can | |
| * read the EDID or not. That in turn has a problem during disconnect, | |
| * since the HPD interrupt may be raised before the DDC lines get | |
| * disconnected (due to how the required length of DDC vs. HPD | |
| * connector pins are specified) and so we'll still be able to get a | |
| * valid EDID. To solve this schedule another detection cycle if this | |
| * time around we didn't detect any change in the sink's connection | |
| * status. | |
| * | |
| * Type-c connectors which get their HPD signal deasserted then | |
| * reasserted, without unplugging/replugging the sink from the | |
| * connector, introduce a delay until the AUX channel communication | |
| * becomes functional. Retry the detection for 5 seconds on type-c | |
| * connectors to account for this delay. | |
| */ | |
| if (state == INTEL_HOTPLUG_UNCHANGED && | |
| connector->hotplug_retries < (is_tc ? 5 : 1) && | |
| !dig_port->dp.is_mst) | |
| state = INTEL_HOTPLUG_RETRY; | |
| return state; | |
| } | |
| static bool lpt_digital_port_connected(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| u32 bit = display->hotplug.pch_hpd[encoder->hpd_pin]; | |
| return intel_de_read(display, SDEISR) & bit; | |
| } | |
| static bool hsw_digital_port_connected(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| u32 bit = display->hotplug.hpd[encoder->hpd_pin]; | |
| return intel_de_read(display, DEISR) & bit; | |
| } | |
| static bool bdw_digital_port_connected(struct intel_encoder *encoder) | |
| { | |
| struct intel_display *display = to_intel_display(encoder); | |
| u32 bit = display->hotplug.hpd[encoder->hpd_pin]; | |
| return intel_de_read(display, GEN8_DE_PORT_ISR) & bit; | |
| } | |
| static int intel_ddi_init_hdmi_connector(struct intel_digital_port *dig_port) | |
| { | |
| struct intel_connector *connector; | |
| enum port port = dig_port->base.port; | |
| connector = intel_connector_alloc(); | |
| if (!connector) | |
| return -ENOMEM; | |
| dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); | |
| if (!intel_hdmi_init_connector(dig_port, connector)) { | |
| /* | |
| * HDMI connector init failures may just mean conflicting DDC | |
| * pins or not having enough lanes. Handle them gracefully, but | |
| * don't fail the entire DDI init. | |
| */ | |
| dig_port->hdmi.hdmi_reg = INVALID_MMIO_REG; | |
| kfree(connector); | |
| } | |
| return 0; | |
| } | |
| static bool intel_ddi_a_force_4_lanes(struct intel_digital_port *dig_port) | |
| { | |
| struct intel_display *display = to_intel_display(dig_port); | |
| if (dig_port->base.port != PORT_A) | |
| return false; | |
| if (dig_port->ddi_a_4_lanes) | |
| return false; | |
| /* Broxton/Geminilake: Bspec says that DDI_A_4_LANES is the only | |
| * supported configuration | |
| */ | |
| if (display->platform.geminilake || display->platform.broxton) | |
| return true; | |
| return false; | |
| } | |
| static int | |
| intel_ddi_max_lanes(struct intel_digital_port *dig_port) | |
| { | |
| struct intel_display *display = to_intel_display(dig_port); | |
| enum port port = dig_port->base.port; | |
| int max_lanes = 4; | |
| if (DISPLAY_VER(display) >= 11) | |
| return max_lanes; | |
| if (port == PORT_A || port == PORT_E) { | |
| if (intel_de_read(display, DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) | |
| max_lanes = port == PORT_A ? 4 : 0; | |
| else | |
| /* Both A and E share 2 lanes */ | |
| max_lanes = 2; | |
| } | |
| /* | |
| * Some BIOS might fail to set this bit on port A if eDP | |
| * wasn't lit up at boot. Force this bit set when needed | |
| * so we use the proper lane count for our calculations. | |
| */ | |
| if (intel_ddi_a_force_4_lanes(dig_port)) { | |
| drm_dbg_kms(display->drm, | |
| "Forcing DDI_A_4_LANES for port A\n"); | |
| dig_port->ddi_a_4_lanes = true; | |
| max_lanes = 4; | |
| } | |
| return max_lanes; | |
| } | |
| static enum hpd_pin xelpd_hpd_pin(struct intel_display *display, enum port port) | |
| { | |
| if (port >= PORT_D_XELPD) | |
| return HPD_PORT_D + port - PORT_D_XELPD; | |
| else if (port >= PORT_TC1) | |
| return HPD_PORT_TC1 + port - PORT_TC1; | |
| else | |
| return HPD_PORT_A + port - PORT_A; | |
| } | |
| static enum hpd_pin dg1_hpd_pin(struct intel_display *display, enum port port) | |
| { | |
| if (port >= PORT_TC1) | |
| return HPD_PORT_C + port - PORT_TC1; | |
| else | |
| return HPD_PORT_A + port - PORT_A; | |
| } | |
| static enum hpd_pin tgl_hpd_pin(struct intel_display *display, enum port port) | |
| { | |
| if (port >= PORT_TC1) | |
| return HPD_PORT_TC1 + port - PORT_TC1; | |
| else | |
| return HPD_PORT_A + port - PORT_A; | |
| } | |
| static enum hpd_pin rkl_hpd_pin(struct intel_display *display, enum port port) | |
| { | |
| if (HAS_PCH_TGP(display)) | |
| return tgl_hpd_pin(display, port); | |
| if (port >= PORT_TC1) | |
| return HPD_PORT_C + port - PORT_TC1; | |
| else | |
| return HPD_PORT_A + port - PORT_A; | |
| } | |
| static enum hpd_pin icl_hpd_pin(struct intel_display *display, enum port port) | |
| { | |
| if (port >= PORT_C) | |
| return HPD_PORT_TC1 + port - PORT_C; | |
| else | |
| return HPD_PORT_A + port - PORT_A; | |
| } | |
| static enum hpd_pin ehl_hpd_pin(struct intel_display *display, enum port port) | |
| { | |
| if (port == PORT_D) | |
| return HPD_PORT_A; | |
| if (HAS_PCH_TGP(display)) | |
| return icl_hpd_pin(display, port); | |
| return HPD_PORT_A + port - PORT_A; | |
| } | |
| static enum hpd_pin skl_hpd_pin(struct intel_display *display, enum port port) | |
| { | |
| if (HAS_PCH_TGP(display)) | |
| return icl_hpd_pin(display, port); | |
| return HPD_PORT_A + port - PORT_A; | |
| } | |
| static bool intel_ddi_is_tc(struct intel_display *display, enum port port) | |
| { | |
| if (DISPLAY_VER(display) >= 12) | |
| return port >= PORT_TC1; | |
| else if (DISPLAY_VER(display) >= 11) | |
| return port >= PORT_C; | |
| else | |
| return false; | |
| } | |
| static void intel_ddi_encoder_suspend(struct intel_encoder *encoder) | |
| { | |
| intel_dp_encoder_suspend(encoder); | |
| } | |
| static void intel_ddi_tc_encoder_suspend_complete(struct intel_encoder *encoder) | |
| { | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); | |
| /* | |
| * TODO: Move this to intel_dp_encoder_suspend(), | |
| * once modeset locking around that is removed. | |
| */ | |
| intel_encoder_link_check_flush_work(encoder); | |
| intel_tc_port_suspend(dig_port); | |
| } | |
| static void intel_ddi_encoder_shutdown(struct intel_encoder *encoder) | |
| { | |
| if (intel_encoder_is_dp(encoder)) | |
| intel_dp_encoder_shutdown(encoder); | |
| if (intel_encoder_is_hdmi(encoder)) | |
| intel_hdmi_encoder_shutdown(encoder); | |
| } | |
| static void intel_ddi_tc_encoder_shutdown_complete(struct intel_encoder *encoder) | |
| { | |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); | |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); | |
| intel_tc_port_cleanup(dig_port); | |
| } | |
| #define port_tc_name(port) ((port) - PORT_TC1 + '1') | |
| #define tc_port_name(tc_port) ((tc_port) - TC_PORT_1 + '1') | |
| static bool port_strap_detected(struct intel_display *display, enum port port) | |
| { | |
| /* straps not used on skl+ */ | |
| if (DISPLAY_VER(display) >= 9) | |
| return true; | |
| switch (port) { | |
| case PORT_A: | |
| return intel_de_read(display, DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED; | |
| case PORT_B: | |
| return intel_de_read(display, SFUSE_STRAP) & SFUSE_STRAP_DDIB_DETECTED; | |
| case PORT_C: | |
| return intel_de_read(display, SFUSE_STRAP) & SFUSE_STRAP_DDIC_DETECTED; | |
| case PORT_D: | |
| return intel_de_read(display, SFUSE_STRAP) & SFUSE_STRAP_DDID_DETECTED; | |
| case PORT_E: | |
| return true; /* no strap for DDI-E */ | |
| default: | |
| MISSING_CASE(port); | |
| return false; | |
| } | |
| } | |
| static bool need_aux_ch(struct intel_encoder *encoder, bool init_dp) | |
| { | |
| return init_dp || intel_encoder_is_tc(encoder); | |
| } | |
| static bool assert_has_icl_dsi(struct intel_display *display) | |
| { | |
| return !drm_WARN(display->drm, !display->platform.alderlake_p && | |
| !display->platform.tigerlake && DISPLAY_VER(display) != 11, | |
| "Platform does not support DSI\n"); | |
| } | |
| static bool port_in_use(struct intel_display *display, enum port port) | |
| { | |
| struct intel_encoder *encoder; | |
| for_each_intel_encoder(display->drm, encoder) { | |
| /* FIXME what about second port for dual link DSI? */ | |
| if (encoder->port == port) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static const char *intel_ddi_encoder_name(struct intel_display *display, | |
| enum port port, enum phy phy, | |
| struct seq_buf *s) | |
| { | |
| if (DISPLAY_VER(display) >= 13 && port >= PORT_D_XELPD) { | |
| seq_buf_printf(s, "DDI %c/PHY %c", | |
| port_name(port - PORT_D_XELPD + PORT_D), | |
| phy_name(phy)); | |
| } else if (DISPLAY_VER(display) >= 12) { | |
| enum tc_port tc_port = intel_tc_phy_port_to_tc(display, port); | |
| seq_buf_printf(s, "DDI %s%c/PHY %s%c", | |
| port >= PORT_TC1 ? "TC" : "", | |
| port >= PORT_TC1 ? port_tc_name(port) : port_name(port), | |
| tc_port != TC_PORT_NONE ? "TC" : "", | |
| tc_port != TC_PORT_NONE ? tc_port_name(tc_port) : phy_name(phy)); | |
| } else if (DISPLAY_VER(display) >= 11) { | |
| enum tc_port tc_port = intel_tc_phy_port_to_tc(display, port); | |
| seq_buf_printf(s, "DDI %c%s/PHY %s%c", | |
| port_name(port), | |
| port >= PORT_C ? " (TC)" : "", | |
| tc_port != TC_PORT_NONE ? "TC" : "", | |
| tc_port != TC_PORT_NONE ? tc_port_name(tc_port) : phy_name(phy)); | |
| } else { | |
| seq_buf_printf(s, "DDI %c/PHY %c", port_name(port), phy_name(phy)); | |
| } | |
| drm_WARN_ON(display->drm, seq_buf_has_overflowed(s)); | |
| return seq_buf_str(s); | |
| } | |
| void intel_ddi_init(struct intel_display *display, | |
| const struct intel_bios_encoder_data *devdata) | |
| { | |
| struct intel_digital_port *dig_port; | |
| struct intel_encoder *encoder; | |
| DECLARE_SEQ_BUF(encoder_name, 20); | |
| bool init_hdmi, init_dp; | |
| enum port port; | |
| enum phy phy; | |
| u32 ddi_buf_ctl; | |
| port = intel_bios_encoder_port(devdata); | |
| if (port == PORT_NONE) | |
| return; | |
| if (!port_strap_detected(display, port)) { | |
| drm_dbg_kms(display->drm, | |
| "Port %c strap not detected\n", port_name(port)); | |
| return; | |
| } | |
| if (!assert_port_valid(display, port)) | |
| return; | |
| if (port_in_use(display, port)) { | |
| drm_dbg_kms(display->drm, | |
| "Port %c already claimed\n", port_name(port)); | |
| return; | |
| } | |
| if (intel_bios_encoder_supports_dsi(devdata)) { | |
| /* BXT/GLK handled elsewhere, for now at least */ | |
| if (!assert_has_icl_dsi(display)) | |
| return; | |
| icl_dsi_init(display, devdata); | |
| return; | |
| } | |
| phy = intel_port_to_phy(display, port); | |
| /* | |
| * On platforms with HTI (aka HDPORT), if it's enabled at boot it may | |
| * have taken over some of the PHYs and made them unavailable to the | |
| * driver. In that case we should skip initializing the corresponding | |
| * outputs. | |
| */ | |
| if (intel_hti_uses_phy(display, phy)) { | |
| drm_dbg_kms(display->drm, "PORT %c / PHY %c reserved by HTI\n", | |
| port_name(port), phy_name(phy)); | |
| return; | |
| } | |
| init_hdmi = intel_bios_encoder_supports_dvi(devdata) || | |
| intel_bios_encoder_supports_hdmi(devdata); | |
| init_dp = intel_bios_encoder_supports_dp(devdata); | |
| if (intel_bios_encoder_is_lspcon(devdata)) { | |
| /* | |
| * Lspcon device needs to be driven with DP connector | |
| * with special detection sequence. So make sure DP | |
| * is initialized before lspcon. | |
| */ | |
| init_dp = true; | |
| init_hdmi = false; | |
| drm_dbg_kms(display->drm, "VBT says port %c has lspcon\n", | |
| port_name(port)); | |
| } | |
| if (!init_dp && !init_hdmi) { | |
| drm_dbg_kms(display->drm, | |
| "VBT says port %c is not DVI/HDMI/DP compatible, respect it\n", | |
| port_name(port)); | |
| return; | |
| } | |
| if (intel_phy_is_snps(display, phy) && | |
| display->snps.phy_failed_calibration & BIT(phy)) { | |
| drm_dbg_kms(display->drm, | |
| "SNPS PHY %c failed to calibrate, proceeding anyway\n", | |
| phy_name(phy)); | |
| } | |
| dig_port = intel_dig_port_alloc(); | |
| if (!dig_port) | |
| return; | |
| encoder = &dig_port->base; | |
| encoder->devdata = devdata; | |
| drm_encoder_init(display->drm, &encoder->base, &intel_ddi_funcs, | |
| DRM_MODE_ENCODER_TMDS, "%s", | |
| intel_ddi_encoder_name(display, port, phy, &encoder_name)); | |
| intel_encoder_link_check_init(encoder, intel_ddi_link_check); | |
| encoder->hotplug = intel_ddi_hotplug; | |
| encoder->compute_output_type = intel_ddi_compute_output_type; | |
| encoder->compute_config = intel_ddi_compute_config; | |
| encoder->compute_config_late = intel_ddi_compute_config_late; | |
| encoder->enable = intel_ddi_enable; | |
| encoder->pre_pll_enable = intel_ddi_pre_pll_enable; | |
| encoder->pre_enable = intel_ddi_pre_enable; | |
| encoder->disable = intel_ddi_disable; | |
| encoder->post_pll_disable = intel_ddi_post_pll_disable; | |
| encoder->post_disable = intel_ddi_post_disable; | |
| encoder->update_pipe = intel_ddi_update_pipe; | |
| encoder->audio_enable = intel_audio_codec_enable; | |
| encoder->audio_disable = intel_audio_codec_disable; | |
| encoder->get_hw_state = intel_ddi_get_hw_state; | |
| encoder->sync_state = intel_ddi_sync_state; | |
| encoder->initial_fastset_check = intel_ddi_initial_fastset_check; | |
| encoder->suspend = intel_ddi_encoder_suspend; | |
| encoder->shutdown = intel_ddi_encoder_shutdown; | |
| encoder->get_power_domains = intel_ddi_get_power_domains; | |
| encoder->type = INTEL_OUTPUT_DDI; | |
| encoder->power_domain = intel_display_power_ddi_lanes_domain(display, port); | |
| encoder->port = port; | |
| encoder->cloneable = 0; | |
| encoder->pipe_mask = ~0; | |
| if (HAS_LT_PHY(display)) { | |
| encoder->enable_clock = intel_mtl_pll_enable_clock; | |
| encoder->disable_clock = intel_mtl_pll_disable_clock; | |
| encoder->port_pll_type = icl_ddi_tc_port_pll_type; | |
| if (intel_encoder_is_tc(encoder)) | |
| encoder->get_config = mtl_ddi_tc_phy_get_config; | |
| else | |
| encoder->get_config = mtl_ddi_non_tc_phy_get_config; | |
| } else if (DISPLAY_VER(display) >= 14) { | |
| encoder->enable_clock = intel_mtl_pll_enable_clock; | |
| encoder->disable_clock = intel_mtl_pll_disable_clock; | |
| encoder->port_pll_type = icl_ddi_tc_port_pll_type; | |
| if (intel_encoder_is_tc(encoder)) | |
| encoder->get_config = mtl_ddi_tc_phy_get_config; | |
| else | |
| encoder->get_config = mtl_ddi_non_tc_phy_get_config; | |
| } else if (display->platform.dg2) { | |
| encoder->enable_clock = intel_mpllb_enable; | |
| encoder->disable_clock = intel_mpllb_disable; | |
| encoder->get_config = dg2_ddi_get_config; | |
| } else if (display->platform.alderlake_s) { | |
| encoder->enable_clock = adls_ddi_enable_clock; | |
| encoder->disable_clock = adls_ddi_disable_clock; | |
| encoder->is_clock_enabled = adls_ddi_is_clock_enabled; | |
| encoder->get_config = adls_ddi_get_config; | |
| } else if (display->platform.rocketlake) { | |
| encoder->enable_clock = rkl_ddi_enable_clock; | |
| encoder->disable_clock = rkl_ddi_disable_clock; | |
| encoder->is_clock_enabled = rkl_ddi_is_clock_enabled; | |
| encoder->get_config = rkl_ddi_get_config; | |
| } else if (display->platform.dg1) { | |
| encoder->enable_clock = dg1_ddi_enable_clock; | |
| encoder->disable_clock = dg1_ddi_disable_clock; | |
| encoder->is_clock_enabled = dg1_ddi_is_clock_enabled; | |
| encoder->get_config = dg1_ddi_get_config; | |
| } else if (display->platform.jasperlake || display->platform.elkhartlake) { | |
| if (intel_ddi_is_tc(display, port)) { | |
| encoder->enable_clock = jsl_ddi_tc_enable_clock; | |
| encoder->disable_clock = jsl_ddi_tc_disable_clock; | |
| encoder->is_clock_enabled = jsl_ddi_tc_is_clock_enabled; | |
| encoder->port_pll_type = icl_ddi_tc_port_pll_type; | |
| encoder->get_config = icl_ddi_combo_get_config; | |
| } else { | |
| encoder->enable_clock = icl_ddi_combo_enable_clock; | |
| encoder->disable_clock = icl_ddi_combo_disable_clock; | |
| encoder->is_clock_enabled = icl_ddi_combo_is_clock_enabled; | |
| encoder->get_config = icl_ddi_combo_get_config; | |
| } | |
| } else if (DISPLAY_VER(display) >= 11) { | |
| if (intel_ddi_is_tc(display, port)) { | |
| encoder->enable_clock = icl_ddi_tc_enable_clock; | |
| encoder->disable_clock = icl_ddi_tc_disable_clock; | |
| encoder->is_clock_enabled = icl_ddi_tc_is_clock_enabled; | |
| encoder->port_pll_type = icl_ddi_tc_port_pll_type; | |
| encoder->get_config = icl_ddi_tc_get_config; | |
| } else { | |
| encoder->enable_clock = icl_ddi_combo_enable_clock; | |
| encoder->disable_clock = icl_ddi_combo_disable_clock; | |
| encoder->is_clock_enabled = icl_ddi_combo_is_clock_enabled; | |
| encoder->get_config = icl_ddi_combo_get_config; | |
| } | |
| } else if (display->platform.geminilake || display->platform.broxton) { | |
| /* BXT/GLK have fixed PLL->port mapping */ | |
| encoder->get_config = bxt_ddi_get_config; | |
| } else if (DISPLAY_VER(display) == 9) { | |
| encoder->enable_clock = skl_ddi_enable_clock; | |
| encoder->disable_clock = skl_ddi_disable_clock; | |
| encoder->is_clock_enabled = skl_ddi_is_clock_enabled; | |
| encoder->get_config = skl_ddi_get_config; | |
| } else if (display->platform.broadwell || display->platform.haswell) { | |
| encoder->enable_clock = hsw_ddi_enable_clock; | |
| encoder->disable_clock = hsw_ddi_disable_clock; | |
| encoder->is_clock_enabled = hsw_ddi_is_clock_enabled; | |
| encoder->get_config = hsw_ddi_get_config; | |
| } | |
| if (HAS_LT_PHY(display)) { | |
| encoder->set_signal_levels = intel_lt_phy_set_signal_levels; | |
| } else if (DISPLAY_VER(display) >= 14) { | |
| encoder->set_signal_levels = intel_cx0_phy_set_signal_levels; | |
| } else if (display->platform.dg2) { | |
| encoder->set_signal_levels = intel_snps_phy_set_signal_levels; | |
| } else if (DISPLAY_VER(display) >= 12) { | |
| if (intel_encoder_is_combo(encoder)) | |
| encoder->set_signal_levels = icl_combo_phy_set_signal_levels; | |
| else | |
| encoder->set_signal_levels = tgl_dkl_phy_set_signal_levels; | |
| } else if (DISPLAY_VER(display) >= 11) { | |
| if (intel_encoder_is_combo(encoder)) | |
| encoder->set_signal_levels = icl_combo_phy_set_signal_levels; | |
| else | |
| encoder->set_signal_levels = icl_mg_phy_set_signal_levels; | |
| } else if (display->platform.geminilake || display->platform.broxton) { | |
| encoder->set_signal_levels = bxt_dpio_phy_set_signal_levels; | |
| } else { | |
| encoder->set_signal_levels = hsw_set_signal_levels; | |
| } | |
| intel_ddi_buf_trans_init(encoder); | |
| if (DISPLAY_VER(display) >= 13) | |
| encoder->hpd_pin = xelpd_hpd_pin(display, port); | |
| else if (display->platform.dg1) | |
| encoder->hpd_pin = dg1_hpd_pin(display, port); | |
| else if (display->platform.rocketlake) | |
| encoder->hpd_pin = rkl_hpd_pin(display, port); | |
| else if (DISPLAY_VER(display) >= 12) | |
| encoder->hpd_pin = tgl_hpd_pin(display, port); | |
| else if (display->platform.jasperlake || display->platform.elkhartlake) | |
| encoder->hpd_pin = ehl_hpd_pin(display, port); | |
| else if (DISPLAY_VER(display) == 11) | |
| encoder->hpd_pin = icl_hpd_pin(display, port); | |
| else if (DISPLAY_VER(display) == 9 && !display->platform.broxton) | |
| encoder->hpd_pin = skl_hpd_pin(display, port); | |
| else | |
| encoder->hpd_pin = intel_hpd_pin_default(port); | |
| ddi_buf_ctl = intel_de_read(display, DDI_BUF_CTL(port)); | |
| dig_port->lane_reversal = intel_bios_encoder_lane_reversal(devdata) || | |
| ddi_buf_ctl & DDI_BUF_PORT_REVERSAL; | |
| dig_port->ddi_a_4_lanes = DISPLAY_VER(display) < 11 && ddi_buf_ctl & DDI_A_4_LANES; | |
| dig_port->max_lanes = intel_ddi_max_lanes(dig_port); | |
| if (need_aux_ch(encoder, init_dp)) { | |
| dig_port->aux_ch = intel_dp_aux_ch(encoder); | |
| if (dig_port->aux_ch == AUX_CH_NONE) | |
| goto err_aux_ch_init; | |
| } | |
| /* | |
| * FIXME: We currently need to store dedicated_external because devdata | |
| * does not live long enough for when intel_encoder_is_tc() is called on | |
| * the unbind path. This needs to be fixed by making sure that the VBT | |
| * data is kept long enough, so that | |
| * intel_bios_encoder_is_dedicated_external() can be called directly | |
| * from intel_encoder_is_tc(). | |
| */ | |
| if (intel_bios_encoder_is_dedicated_external(devdata)) | |
| dig_port->dedicated_external = true; | |
| if (intel_encoder_is_tc(encoder)) { | |
| bool is_legacy = | |
| !intel_bios_encoder_supports_typec_usb(devdata) && | |
| !intel_bios_encoder_supports_tbt(devdata); | |
| if (!is_legacy && init_hdmi) { | |
| is_legacy = !init_dp; | |
| drm_dbg_kms(display->drm, | |
| "VBT says port %c is non-legacy TC and has HDMI (with DP: %s), assume it's %s\n", | |
| port_name(port), | |
| str_yes_no(init_dp), | |
| is_legacy ? "legacy" : "non-legacy"); | |
| } | |
| encoder->suspend_complete = intel_ddi_tc_encoder_suspend_complete; | |
| encoder->shutdown_complete = intel_ddi_tc_encoder_shutdown_complete; | |
| dig_port->lock = intel_tc_port_lock; | |
| dig_port->unlock = intel_tc_port_unlock; | |
| if (intel_tc_port_init(dig_port, is_legacy) < 0) | |
| goto err_aux_ch_init; | |
| } | |
| drm_WARN_ON(display->drm, port > PORT_I); | |
| dig_port->ddi_io_power_domain = intel_display_power_ddi_io_domain(display, port); | |
| if (DISPLAY_VER(display) >= 11) { | |
| if (intel_encoder_is_tc(encoder)) | |
| dig_port->connected = intel_tc_port_connected; | |
| else | |
| dig_port->connected = lpt_digital_port_connected; | |
| } else if (display->platform.geminilake || display->platform.broxton) { | |
| dig_port->connected = bdw_digital_port_connected; | |
| } else if (DISPLAY_VER(display) == 9) { | |
| dig_port->connected = lpt_digital_port_connected; | |
| } else if (display->platform.broadwell) { | |
| if (port == PORT_A) | |
| dig_port->connected = bdw_digital_port_connected; | |
| else | |
| dig_port->connected = lpt_digital_port_connected; | |
| } else if (display->platform.haswell) { | |
| if (port == PORT_A) | |
| dig_port->connected = hsw_digital_port_connected; | |
| else | |
| dig_port->connected = lpt_digital_port_connected; | |
| } | |
| intel_infoframe_init(dig_port); | |
| if (init_dp) { | |
| if (intel_ddi_init_dp_connector(dig_port)) | |
| goto err_dp_connector_init; | |
| dig_port->hpd_pulse = intel_dp_hpd_pulse; | |
| if (dig_port->dp.mso_link_count) | |
| encoder->pipe_mask = intel_ddi_splitter_pipe_mask(display); | |
| } | |
| /* | |
| * In theory we don't need the encoder->type check, | |
| * but leave it just in case we have some really bad VBTs... | |
| */ | |
| if (encoder->type != INTEL_OUTPUT_EDP && init_hdmi) { | |
| if (intel_ddi_init_hdmi_connector(dig_port)) | |
| goto err_hdmi_connector_init; | |
| } | |
| return; | |
| err_hdmi_connector_init: | |
| if (init_dp) | |
| intel_ddi_cleanup_dp_connector(dig_port); | |
| err_dp_connector_init: | |
| if (intel_encoder_is_tc(encoder)) | |
| intel_tc_port_cleanup(dig_port); | |
| err_aux_ch_init: | |
| drm_encoder_cleanup(&encoder->base); | |
| kfree(dig_port); | |
| } |