| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. | |
| */ | |
| #include <linux/clk-provider.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_clock.h> | |
| #include <linux/pm_runtime.h> | |
| #include <dt-bindings/phy/phy.h> | |
| #include "dsi_phy.h" | |
| #define S_DIV_ROUND_UP(n, d) \ | |
| (((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d))) | |
| static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent, | |
| s32 min_result, bool even) | |
| { | |
| s32 v; | |
| v = (tmax - tmin) * percent; | |
| v = S_DIV_ROUND_UP(v, 100) + tmin; | |
| if (even && (v & 0x1)) | |
| return max_t(s32, min_result, v - 1); | |
| else | |
| return max_t(s32, min_result, v); | |
| } | |
| static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing, | |
| s32 ui, s32 coeff, s32 pcnt) | |
| { | |
| s32 tmax, tmin, clk_z; | |
| s32 temp; | |
| /* reset */ | |
| temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui; | |
| tmin = S_DIV_ROUND_UP(temp, ui) - 2; | |
| if (tmin > 255) { | |
| tmax = 511; | |
| clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true); | |
| } else { | |
| tmax = 255; | |
| clk_z = linear_inter(tmax, tmin, pcnt, 0, true); | |
| } | |
| /* adjust */ | |
| temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7; | |
| timing->clk_zero = clk_z + 8 - temp; | |
| } | |
| int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing, | |
| struct msm_dsi_phy_clk_request *clk_req) | |
| { | |
| const unsigned long bit_rate = clk_req->bitclk_rate; | |
| const unsigned long esc_rate = clk_req->escclk_rate; | |
| s32 ui, lpx; | |
| s32 tmax, tmin; | |
| s32 pcnt0 = 10; | |
| s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10; | |
| s32 pcnt2 = 10; | |
| s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40; | |
| s32 coeff = 1000; /* Precision, should avoid overflow */ | |
| s32 temp; | |
| if (!bit_rate || !esc_rate) | |
| return -EINVAL; | |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); | |
| lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000); | |
| tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2; | |
| tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2; | |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true); | |
| temp = lpx / ui; | |
| if (temp & 0x1) | |
| timing->hs_rqst = temp; | |
| else | |
| timing->hs_rqst = max_t(s32, 0, temp - 2); | |
| /* Calculate clk_zero after clk_prepare and hs_rqst */ | |
| dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = S_DIV_ROUND_UP(temp, ui) - 2; | |
| tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2; | |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true); | |
| temp = 85 * coeff + 6 * ui; | |
| tmax = S_DIV_ROUND_UP(temp, ui) - 2; | |
| temp = 40 * coeff + 4 * ui; | |
| tmin = S_DIV_ROUND_UP(temp, ui) - 2; | |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true); | |
| tmax = 255; | |
| temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui; | |
| temp = 145 * coeff + 10 * ui - temp; | |
| tmin = S_DIV_ROUND_UP(temp, ui) - 2; | |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = S_DIV_ROUND_UP(temp, ui) - 2; | |
| temp = 60 * coeff + 4 * ui; | |
| tmin = DIV_ROUND_UP(temp, ui) - 2; | |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true); | |
| tmax = 255; | |
| tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2; | |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true); | |
| tmax = 63; | |
| temp = ((timing->hs_exit >> 1) + 1) * 2 * ui; | |
| temp = 60 * coeff + 52 * ui - 24 * ui - temp; | |
| tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1; | |
| timing->shared_timings.clk_post = linear_inter(tmax, tmin, pcnt2, 0, | |
| false); | |
| tmax = 63; | |
| temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui; | |
| temp += ((timing->clk_zero >> 1) + 1) * 2 * ui; | |
| temp += 8 * ui + lpx; | |
| tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1; | |
| if (tmin > tmax) { | |
| temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre = temp >> 1; | |
| timing->shared_timings.clk_pre_inc_by_2 = true; | |
| } else { | |
| timing->shared_timings.clk_pre = | |
| linear_inter(tmax, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre_inc_by_2 = false; | |
| } | |
| timing->ta_go = 3; | |
| timing->ta_sure = 0; | |
| timing->ta_get = 4; | |
| DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", | |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, | |
| timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, | |
| timing->clk_trail, timing->clk_prepare, timing->hs_exit, | |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, | |
| timing->hs_rqst); | |
| return 0; | |
| } | |
| int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing, | |
| struct msm_dsi_phy_clk_request *clk_req) | |
| { | |
| const unsigned long bit_rate = clk_req->bitclk_rate; | |
| const unsigned long esc_rate = clk_req->escclk_rate; | |
| s32 ui, ui_x8; | |
| s32 tmax, tmin; | |
| s32 pcnt0 = 50; | |
| s32 pcnt1 = 50; | |
| s32 pcnt2 = 10; | |
| s32 pcnt3 = 30; | |
| s32 pcnt4 = 10; | |
| s32 pcnt5 = 2; | |
| s32 coeff = 1000; /* Precision, should avoid overflow */ | |
| s32 hb_en, hb_en_ckln, pd_ckln, pd; | |
| s32 val, val_ckln; | |
| s32 temp; | |
| if (!bit_rate || !esc_rate) | |
| return -EINVAL; | |
| timing->hs_halfbyte_en = 0; | |
| hb_en = 0; | |
| timing->hs_halfbyte_en_ckln = 0; | |
| hb_en_ckln = 0; | |
| timing->hs_prep_dly_ckln = (bit_rate > 100000000) ? 0 : 3; | |
| pd_ckln = timing->hs_prep_dly_ckln; | |
| timing->hs_prep_dly = (bit_rate > 120000000) ? 0 : 1; | |
| pd = timing->hs_prep_dly; | |
| val = (hb_en << 2) + (pd << 1); | |
| val_ckln = (hb_en_ckln << 2) + (pd_ckln << 1); | |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); | |
| ui_x8 = ui << 3; | |
| temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8); | |
| tmin = max_t(s32, temp, 0); | |
| temp = (95 * coeff - val_ckln * ui) / ui_x8; | |
| tmax = max_t(s32, temp, 0); | |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false); | |
| temp = 300 * coeff - ((timing->clk_prepare << 3) + val_ckln) * ui; | |
| tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3; | |
| tmax = (tmin > 255) ? 511 : 255; | |
| timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false); | |
| tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = (temp + 3 * ui) / ui_x8; | |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false); | |
| temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui - val * ui, ui_x8); | |
| tmin = max_t(s32, temp, 0); | |
| temp = (85 * coeff + 6 * ui - val * ui) / ui_x8; | |
| tmax = max_t(s32, temp, 0); | |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false); | |
| temp = 145 * coeff + 10 * ui - ((timing->hs_prepare << 3) + val) * ui; | |
| tmin = S_DIV_ROUND_UP(temp - 11 * ui, ui_x8) - 3; | |
| tmax = 255; | |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false); | |
| tmin = DIV_ROUND_UP(60 * coeff + 4 * ui + 3 * ui, ui_x8); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = (temp + 3 * ui) / ui_x8; | |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false); | |
| temp = 50 * coeff + ((hb_en << 2) - 8) * ui; | |
| timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); | |
| tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; | |
| tmax = 255; | |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false); | |
| temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui; | |
| timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8); | |
| temp = 60 * coeff + 52 * ui - 43 * ui; | |
| tmin = DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = 63; | |
| timing->shared_timings.clk_post = | |
| linear_inter(tmax, tmin, pcnt2, 0, false); | |
| temp = 8 * ui + ((timing->clk_prepare << 3) + val_ckln) * ui; | |
| temp += (((timing->clk_zero + 3) << 3) + 11 - (pd_ckln << 1)) * ui; | |
| temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) : | |
| (((timing->hs_rqst_ckln << 3) + 8) * ui); | |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = 63; | |
| if (tmin > tmax) { | |
| temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre = temp >> 1; | |
| timing->shared_timings.clk_pre_inc_by_2 = 1; | |
| } else { | |
| timing->shared_timings.clk_pre = | |
| linear_inter(tmax, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre_inc_by_2 = 0; | |
| } | |
| timing->ta_go = 3; | |
| timing->ta_sure = 0; | |
| timing->ta_get = 4; | |
| DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", | |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, | |
| timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, | |
| timing->clk_trail, timing->clk_prepare, timing->hs_exit, | |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, | |
| timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en, | |
| timing->hs_halfbyte_en_ckln, timing->hs_prep_dly, | |
| timing->hs_prep_dly_ckln); | |
| return 0; | |
| } | |
| int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing, | |
| struct msm_dsi_phy_clk_request *clk_req) | |
| { | |
| const unsigned long bit_rate = clk_req->bitclk_rate; | |
| const unsigned long esc_rate = clk_req->escclk_rate; | |
| s32 ui, ui_x8; | |
| s32 tmax, tmin; | |
| s32 pcnt0 = 50; | |
| s32 pcnt1 = 50; | |
| s32 pcnt2 = 10; | |
| s32 pcnt3 = 30; | |
| s32 pcnt4 = 10; | |
| s32 pcnt5 = 2; | |
| s32 coeff = 1000; /* Precision, should avoid overflow */ | |
| s32 hb_en, hb_en_ckln; | |
| s32 temp; | |
| if (!bit_rate || !esc_rate) | |
| return -EINVAL; | |
| timing->hs_halfbyte_en = 0; | |
| hb_en = 0; | |
| timing->hs_halfbyte_en_ckln = 0; | |
| hb_en_ckln = 0; | |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); | |
| ui_x8 = ui << 3; | |
| temp = S_DIV_ROUND_UP(38 * coeff, ui_x8); | |
| tmin = max_t(s32, temp, 0); | |
| temp = (95 * coeff) / ui_x8; | |
| tmax = max_t(s32, temp, 0); | |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false); | |
| temp = 300 * coeff - (timing->clk_prepare << 3) * ui; | |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = (tmin > 255) ? 511 : 255; | |
| timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false); | |
| tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = (temp + 3 * ui) / ui_x8; | |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false); | |
| temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8); | |
| tmin = max_t(s32, temp, 0); | |
| temp = (85 * coeff + 6 * ui) / ui_x8; | |
| tmax = max_t(s32, temp, 0); | |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false); | |
| temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui; | |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = 255; | |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false); | |
| tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1; | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = (temp / ui_x8) - 1; | |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false); | |
| temp = 50 * coeff + ((hb_en << 2) - 8) * ui; | |
| timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); | |
| tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; | |
| tmax = 255; | |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false); | |
| temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui; | |
| timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8); | |
| temp = 60 * coeff + 52 * ui - 43 * ui; | |
| tmin = DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = 63; | |
| timing->shared_timings.clk_post = | |
| linear_inter(tmax, tmin, pcnt2, 0, false); | |
| temp = 8 * ui + (timing->clk_prepare << 3) * ui; | |
| temp += (((timing->clk_zero + 3) << 3) + 11) * ui; | |
| temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) : | |
| (((timing->hs_rqst_ckln << 3) + 8) * ui); | |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = 63; | |
| if (tmin > tmax) { | |
| temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre = temp >> 1; | |
| timing->shared_timings.clk_pre_inc_by_2 = 1; | |
| } else { | |
| timing->shared_timings.clk_pre = | |
| linear_inter(tmax, tmin, pcnt2, 0, false); | |
| timing->shared_timings.clk_pre_inc_by_2 = 0; | |
| } | |
| timing->shared_timings.byte_intf_clk_div_2 = true; | |
| timing->ta_go = 3; | |
| timing->ta_sure = 0; | |
| timing->ta_get = 4; | |
| DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d", | |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, | |
| timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero, | |
| timing->clk_trail, timing->clk_prepare, timing->hs_exit, | |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, | |
| timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en, | |
| timing->hs_halfbyte_en_ckln, timing->hs_prep_dly, | |
| timing->hs_prep_dly_ckln); | |
| return 0; | |
| } | |
| int msm_dsi_dphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing, | |
| struct msm_dsi_phy_clk_request *clk_req) | |
| { | |
| const unsigned long bit_rate = clk_req->bitclk_rate; | |
| const unsigned long esc_rate = clk_req->escclk_rate; | |
| s32 ui, ui_x8; | |
| s32 tmax, tmin; | |
| s32 pcnt_clk_prep = 50; | |
| s32 pcnt_clk_zero = 2; | |
| s32 pcnt_clk_trail = 30; | |
| s32 pcnt_hs_prep = 50; | |
| s32 pcnt_hs_zero = 10; | |
| s32 pcnt_hs_trail = 30; | |
| s32 pcnt_hs_exit = 10; | |
| s32 coeff = 1000; /* Precision, should avoid overflow */ | |
| s32 hb_en; | |
| s32 temp; | |
| if (!bit_rate || !esc_rate) | |
| return -EINVAL; | |
| hb_en = 0; | |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); | |
| ui_x8 = ui << 3; | |
| /* TODO: verify these calculations against latest downstream driver | |
| * everything except clk_post/clk_pre uses calculations from v3 based | |
| * on the downstream driver having the same calculations for v3 and v4 | |
| */ | |
| temp = S_DIV_ROUND_UP(38 * coeff, ui_x8); | |
| tmin = max_t(s32, temp, 0); | |
| temp = (95 * coeff) / ui_x8; | |
| tmax = max_t(s32, temp, 0); | |
| timing->clk_prepare = linear_inter(tmax, tmin, pcnt_clk_prep, 0, false); | |
| temp = 300 * coeff - (timing->clk_prepare << 3) * ui; | |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = (tmin > 255) ? 511 : 255; | |
| timing->clk_zero = linear_inter(tmax, tmin, pcnt_clk_zero, 0, false); | |
| tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8); | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = (temp + 3 * ui) / ui_x8; | |
| timing->clk_trail = linear_inter(tmax, tmin, pcnt_clk_trail, 0, false); | |
| temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8); | |
| tmin = max_t(s32, temp, 0); | |
| temp = (85 * coeff + 6 * ui) / ui_x8; | |
| tmax = max_t(s32, temp, 0); | |
| timing->hs_prepare = linear_inter(tmax, tmin, pcnt_hs_prep, 0, false); | |
| temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui; | |
| tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1; | |
| tmax = 255; | |
| timing->hs_zero = linear_inter(tmax, tmin, pcnt_hs_zero, 0, false); | |
| tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1; | |
| temp = 105 * coeff + 12 * ui - 20 * coeff; | |
| tmax = (temp / ui_x8) - 1; | |
| timing->hs_trail = linear_inter(tmax, tmin, pcnt_hs_trail, 0, false); | |
| temp = 50 * coeff + ((hb_en << 2) - 8) * ui; | |
| timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8); | |
| tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1; | |
| tmax = 255; | |
| timing->hs_exit = linear_inter(tmax, tmin, pcnt_hs_exit, 0, false); | |
| /* recommended min | |
| * = roundup((mipi_min_ns + t_hs_trail_ns)/(16*bit_clk_ns), 0) - 1 | |
| */ | |
| temp = 60 * coeff + 52 * ui + + (timing->hs_trail + 1) * ui_x8; | |
| tmin = DIV_ROUND_UP(temp, 16 * ui) - 1; | |
| tmax = 255; | |
| timing->shared_timings.clk_post = linear_inter(tmax, tmin, 5, 0, false); | |
| /* recommended min | |
| * val1 = (tlpx_ns + clk_prepare_ns + clk_zero_ns + hs_rqst_ns) | |
| * val2 = (16 * bit_clk_ns) | |
| * final = roundup(val1/val2, 0) - 1 | |
| */ | |
| temp = 52 * coeff + (timing->clk_prepare + timing->clk_zero + 1) * ui_x8 + 54 * coeff; | |
| tmin = DIV_ROUND_UP(temp, 16 * ui) - 1; | |
| tmax = 255; | |
| timing->shared_timings.clk_pre = DIV_ROUND_UP((tmax - tmin) * 125, 10000) + tmin; | |
| timing->shared_timings.byte_intf_clk_div_2 = true; | |
| DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d", | |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, | |
| timing->clk_zero, timing->clk_trail, timing->clk_prepare, timing->hs_exit, | |
| timing->hs_zero, timing->hs_prepare, timing->hs_trail, timing->hs_rqst); | |
| return 0; | |
| } | |
| int msm_dsi_cphy_timing_calc_v4(struct msm_dsi_dphy_timing *timing, | |
| struct msm_dsi_phy_clk_request *clk_req) | |
| { | |
| const unsigned long bit_rate = clk_req->bitclk_rate; | |
| const unsigned long esc_rate = clk_req->escclk_rate; | |
| s32 ui, ui_x7; | |
| s32 tmax, tmin; | |
| s32 coeff = 1000; /* Precision, should avoid overflow */ | |
| s32 temp; | |
| if (!bit_rate || !esc_rate) | |
| return -EINVAL; | |
| ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000); | |
| ui_x7 = ui * 7; | |
| temp = S_DIV_ROUND_UP(38 * coeff, ui_x7); | |
| tmin = max_t(s32, temp, 0); | |
| temp = (95 * coeff) / ui_x7; | |
| tmax = max_t(s32, temp, 0); | |
| timing->clk_prepare = linear_inter(tmax, tmin, 50, 0, false); | |
| tmin = DIV_ROUND_UP(50 * coeff, ui_x7); | |
| tmax = 255; | |
| timing->hs_rqst = linear_inter(tmax, tmin, 1, 0, false); | |
| tmin = DIV_ROUND_UP(100 * coeff, ui_x7) - 1; | |
| tmax = 255; | |
| timing->hs_exit = linear_inter(tmax, tmin, 10, 0, false); | |
| tmin = 1; | |
| tmax = 32; | |
| timing->shared_timings.clk_post = linear_inter(tmax, tmin, 80, 0, false); | |
| tmin = min_t(s32, 64, S_DIV_ROUND_UP(262 * coeff, ui_x7) - 1); | |
| tmax = 64; | |
| timing->shared_timings.clk_pre = linear_inter(tmax, tmin, 20, 0, false); | |
| DBG("%d, %d, %d, %d, %d", | |
| timing->shared_timings.clk_pre, timing->shared_timings.clk_post, | |
| timing->clk_prepare, timing->hs_exit, timing->hs_rqst); | |
| return 0; | |
| } | |
| static const struct of_device_id dsi_phy_dt_match[] = { | |
| #ifdef CONFIG_DRM_MSM_DSI_28NM_PHY | |
| { .compatible = "qcom,dsi-phy-28nm-hpm", | |
| .data = &dsi_phy_28nm_hpm_cfgs }, | |
| { .compatible = "qcom,dsi-phy-28nm-hpm-fam-b", | |
| .data = &dsi_phy_28nm_hpm_famb_cfgs }, | |
| { .compatible = "qcom,dsi-phy-28nm-lp", | |
| .data = &dsi_phy_28nm_lp_cfgs }, | |
| { .compatible = "qcom,dsi-phy-28nm-8226", | |
| .data = &dsi_phy_28nm_8226_cfgs }, | |
| { .compatible = "qcom,dsi-phy-28nm-8937", | |
| .data = &dsi_phy_28nm_8937_cfgs }, | |
| #endif | |
| #ifdef CONFIG_DRM_MSM_DSI_20NM_PHY | |
| { .compatible = "qcom,dsi-phy-20nm", | |
| .data = &dsi_phy_20nm_cfgs }, | |
| #endif | |
| #ifdef CONFIG_DRM_MSM_DSI_28NM_8960_PHY | |
| { .compatible = "qcom,dsi-phy-28nm-8960", | |
| .data = &dsi_phy_28nm_8960_cfgs }, | |
| #endif | |
| #ifdef CONFIG_DRM_MSM_DSI_14NM_PHY | |
| { .compatible = "qcom,dsi-phy-14nm", | |
| .data = &dsi_phy_14nm_cfgs }, | |
| { .compatible = "qcom,dsi-phy-14nm-2290", | |
| .data = &dsi_phy_14nm_2290_cfgs }, | |
| { .compatible = "qcom,dsi-phy-14nm-660", | |
| .data = &dsi_phy_14nm_660_cfgs }, | |
| { .compatible = "qcom,dsi-phy-14nm-8953", | |
| .data = &dsi_phy_14nm_8953_cfgs }, | |
| { .compatible = "qcom,sm6125-dsi-phy-14nm", | |
| .data = &dsi_phy_14nm_2290_cfgs }, | |
| { .compatible = "qcom,sm6150-dsi-phy-14nm", | |
| .data = &dsi_phy_14nm_6150_cfgs }, | |
| #endif | |
| #ifdef CONFIG_DRM_MSM_DSI_10NM_PHY | |
| { .compatible = "qcom,dsi-phy-10nm", | |
| .data = &dsi_phy_10nm_cfgs }, | |
| { .compatible = "qcom,dsi-phy-10nm-8998", | |
| .data = &dsi_phy_10nm_8998_cfgs }, | |
| #endif | |
| #ifdef CONFIG_DRM_MSM_DSI_7NM_PHY | |
| { .compatible = "qcom,dsi-phy-7nm", | |
| .data = &dsi_phy_7nm_cfgs }, | |
| { .compatible = "qcom,dsi-phy-7nm-8150", | |
| .data = &dsi_phy_7nm_8150_cfgs }, | |
| { .compatible = "qcom,sa8775p-dsi-phy-5nm", | |
| .data = &dsi_phy_5nm_8775p_cfgs }, | |
| { .compatible = "qcom,sar2130p-dsi-phy-5nm", | |
| .data = &dsi_phy_5nm_sar2130p_cfgs }, | |
| { .compatible = "qcom,sc7280-dsi-phy-7nm", | |
| .data = &dsi_phy_7nm_7280_cfgs }, | |
| { .compatible = "qcom,sm6375-dsi-phy-7nm", | |
| .data = &dsi_phy_7nm_6375_cfgs }, | |
| { .compatible = "qcom,sm8350-dsi-phy-5nm", | |
| .data = &dsi_phy_5nm_8350_cfgs }, | |
| { .compatible = "qcom,sm8450-dsi-phy-5nm", | |
| .data = &dsi_phy_5nm_8450_cfgs }, | |
| { .compatible = "qcom,milos-dsi-phy-4nm", | |
| .data = &dsi_phy_4nm_milos_cfgs }, | |
| { .compatible = "qcom,sm8550-dsi-phy-4nm", | |
| .data = &dsi_phy_4nm_8550_cfgs }, | |
| { .compatible = "qcom,sm8650-dsi-phy-4nm", | |
| .data = &dsi_phy_4nm_8650_cfgs }, | |
| { .compatible = "qcom,sm8750-dsi-phy-3nm", | |
| .data = &dsi_phy_3nm_8750_cfgs }, | |
| { .compatible = "qcom,kaanapali-dsi-phy-3nm", | |
| .data = &dsi_phy_3nm_kaanapali_cfgs }, | |
| #endif | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(of, dsi_phy_dt_match); | |
| /* | |
| * Currently, we only support one SoC for each PHY type. When we have multiple | |
| * SoCs for the same PHY, we can try to make the index searching a bit more | |
| * clever. | |
| */ | |
| static int dsi_phy_get_id(struct msm_dsi_phy *phy) | |
| { | |
| struct platform_device *pdev = phy->pdev; | |
| const struct msm_dsi_phy_cfg *cfg = phy->cfg; | |
| struct resource *res; | |
| int i; | |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dsi_phy"); | |
| if (!res) | |
| return -EINVAL; | |
| for (i = 0; i < cfg->num_dsi_phy; i++) { | |
| if (cfg->io_start[i] == res->start) | |
| return i; | |
| } | |
| return -EINVAL; | |
| } | |
| static int dsi_phy_driver_probe(struct platform_device *pdev) | |
| { | |
| struct msm_dsi_phy *phy; | |
| struct device *dev = &pdev->dev; | |
| u32 phy_type; | |
| int ret; | |
| phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); | |
| if (!phy) | |
| return -ENOMEM; | |
| phy->provided_clocks = devm_kzalloc(dev, | |
| struct_size(phy->provided_clocks, hws, NUM_PROVIDED_CLKS), | |
| GFP_KERNEL); | |
| if (!phy->provided_clocks) | |
| return -ENOMEM; | |
| phy->provided_clocks->num = NUM_PROVIDED_CLKS; | |
| phy->cfg = of_device_get_match_data(&pdev->dev); | |
| if (!phy->cfg) | |
| return -ENODEV; | |
| phy->pdev = pdev; | |
| phy->id = dsi_phy_get_id(phy); | |
| if (phy->id < 0) | |
| return dev_err_probe(dev, phy->id, | |
| "Couldn't identify PHY index\n"); | |
| phy->regulator_ldo_mode = of_property_read_bool(dev->of_node, | |
| "qcom,dsi-phy-regulator-ldo-mode"); | |
| if (!of_property_read_u32(dev->of_node, "phy-type", &phy_type)) | |
| phy->cphy_mode = (phy_type == PHY_TYPE_CPHY); | |
| phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size); | |
| if (IS_ERR(phy->base)) | |
| return dev_err_probe(dev, PTR_ERR(phy->base), | |
| "Failed to map phy base\n"); | |
| phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", &phy->pll_size); | |
| if (IS_ERR(phy->pll_base)) | |
| return dev_err_probe(dev, PTR_ERR(phy->pll_base), | |
| "Failed to map pll base\n"); | |
| if (phy->cfg->has_phy_lane) { | |
| phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", &phy->lane_size); | |
| if (IS_ERR(phy->lane_base)) | |
| return dev_err_probe(dev, PTR_ERR(phy->lane_base), | |
| "Failed to map phy lane base\n"); | |
| } | |
| if (phy->cfg->has_phy_regulator) { | |
| phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", &phy->reg_size); | |
| if (IS_ERR(phy->reg_base)) | |
| return dev_err_probe(dev, PTR_ERR(phy->reg_base), | |
| "Failed to map phy regulator base\n"); | |
| } | |
| if (phy->cfg->ops.parse_dt_properties) { | |
| ret = phy->cfg->ops.parse_dt_properties(phy); | |
| if (ret) | |
| return ret; | |
| } | |
| ret = devm_regulator_bulk_get_const(dev, phy->cfg->num_regulators, | |
| phy->cfg->regulator_data, | |
| &phy->supplies); | |
| if (ret) | |
| return ret; | |
| platform_set_drvdata(pdev, phy); | |
| ret = devm_pm_runtime_enable(dev); | |
| if (ret) | |
| return ret; | |
| ret = devm_pm_clk_create(dev); | |
| if (ret) | |
| return ret; | |
| ret = pm_clk_add(dev, "iface"); | |
| if (ret < 0) | |
| return dev_err_probe(dev, ret, "Unable to get iface clk\n"); | |
| if (phy->cfg->ops.pll_init) { | |
| ret = phy->cfg->ops.pll_init(phy); | |
| if (ret) | |
| return dev_err_probe(dev, ret, | |
| "PLL init failed; need separate clk driver\n"); | |
| } | |
| ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, | |
| phy->provided_clocks); | |
| if (ret) | |
| return dev_err_probe(dev, ret, | |
| "Failed to register clk provider\n"); | |
| return 0; | |
| } | |
| static const struct dev_pm_ops dsi_phy_pm_ops = { | |
| SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL) | |
| }; | |
| static struct platform_driver dsi_phy_platform_driver = { | |
| .probe = dsi_phy_driver_probe, | |
| .driver = { | |
| .name = "msm_dsi_phy", | |
| .of_match_table = dsi_phy_dt_match, | |
| .pm = &dsi_phy_pm_ops, | |
| }, | |
| }; | |
| void __init msm_dsi_phy_driver_register(void) | |
| { | |
| platform_driver_register(&dsi_phy_platform_driver); | |
| } | |
| void __exit msm_dsi_phy_driver_unregister(void) | |
| { | |
| platform_driver_unregister(&dsi_phy_platform_driver); | |
| } | |
| int msm_dsi_phy_enable(struct msm_dsi_phy *phy, | |
| struct msm_dsi_phy_clk_request *clk_req, | |
| struct msm_dsi_phy_shared_timings *shared_timings) | |
| { | |
| struct device *dev; | |
| int ret; | |
| if (!phy || !phy->cfg->ops.enable) | |
| return -EINVAL; | |
| dev = &phy->pdev->dev; | |
| ret = pm_runtime_resume_and_get(dev); | |
| if (ret) { | |
| DRM_DEV_ERROR(dev, "%s: resume failed, %d\n", | |
| __func__, ret); | |
| goto res_en_fail; | |
| } | |
| ret = regulator_bulk_enable(phy->cfg->num_regulators, phy->supplies); | |
| if (ret) { | |
| DRM_DEV_ERROR(dev, "%s: regulator enable failed, %d\n", | |
| __func__, ret); | |
| goto reg_en_fail; | |
| } | |
| ret = phy->cfg->ops.enable(phy, clk_req); | |
| if (ret) { | |
| DRM_DEV_ERROR(dev, "%s: phy enable failed, %d\n", __func__, ret); | |
| goto phy_en_fail; | |
| } | |
| memcpy(shared_timings, &phy->timing.shared_timings, | |
| sizeof(*shared_timings)); | |
| /* | |
| * Resetting DSI PHY silently changes its PLL registers to reset status, | |
| * which will confuse clock driver and result in wrong output rate of | |
| * link clocks. Restore PLL status if its PLL is being used as clock | |
| * source. | |
| */ | |
| if (phy->usecase != MSM_DSI_PHY_SLAVE) { | |
| ret = msm_dsi_phy_pll_restore_state(phy); | |
| if (ret) { | |
| DRM_DEV_ERROR(dev, "%s: failed to restore phy state, %d\n", | |
| __func__, ret); | |
| goto pll_restor_fail; | |
| } | |
| } | |
| return 0; | |
| pll_restor_fail: | |
| if (phy->cfg->ops.disable) | |
| phy->cfg->ops.disable(phy); | |
| phy_en_fail: | |
| regulator_bulk_disable(phy->cfg->num_regulators, phy->supplies); | |
| reg_en_fail: | |
| pm_runtime_put(dev); | |
| res_en_fail: | |
| return ret; | |
| } | |
| void msm_dsi_phy_disable(struct msm_dsi_phy *phy) | |
| { | |
| if (!phy || !phy->cfg->ops.disable) | |
| return; | |
| phy->cfg->ops.disable(phy); | |
| regulator_bulk_disable(phy->cfg->num_regulators, phy->supplies); | |
| pm_runtime_put(&phy->pdev->dev); | |
| } | |
| void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy, | |
| enum msm_dsi_phy_usecase uc) | |
| { | |
| if (phy) | |
| phy->usecase = uc; | |
| } | |
| /* Returns true if we have to clear DSI_LANE_CTRL.HS_REQ_SEL_PHY */ | |
| bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable) | |
| { | |
| if (!phy || !phy->cfg->ops.set_continuous_clock) | |
| return false; | |
| return phy->cfg->ops.set_continuous_clock(phy, enable); | |
| } | |
| void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy) | |
| { | |
| if (phy->cfg->ops.save_pll_state) { | |
| phy->cfg->ops.save_pll_state(phy); | |
| phy->state_saved = true; | |
| } | |
| } | |
| int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy) | |
| { | |
| int ret; | |
| if (phy->cfg->ops.restore_pll_state && phy->state_saved) { | |
| ret = phy->cfg->ops.restore_pll_state(phy); | |
| if (ret) | |
| return ret; | |
| phy->state_saved = false; | |
| } | |
| return 0; | |
| } | |
| void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy) | |
| { | |
| msm_disp_snapshot_add_block(disp_state, | |
| phy->base_size, phy->base, | |
| "dsi%d_phy", phy->id); | |
| /* Do not try accessing PLL registers if it is switched off */ | |
| if (phy->pll_on) | |
| msm_disp_snapshot_add_block(disp_state, | |
| phy->pll_size, phy->pll_base, | |
| "dsi%d_pll", phy->id); | |
| if (phy->lane_base) | |
| msm_disp_snapshot_add_block(disp_state, | |
| phy->lane_size, phy->lane_base, | |
| "dsi%d_lane", phy->id); | |
| if (phy->reg_base) | |
| msm_disp_snapshot_add_block(disp_state, | |
| phy->reg_size, phy->reg_base, | |
| "dsi%d_reg", phy->id); | |
| } |