| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Copyright (C) Icenowy Zheng <icenowy@aosc.io> | |
| * | |
| * Based on sun4i_layer.h, which is: | |
| * Copyright (C) 2015 Free Electrons | |
| * Copyright (C) 2015 NextThing Co | |
| * | |
| * Maxime Ripard <maxime.ripard@free-electrons.com> | |
| */ | |
| #include <drm/drm_atomic.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_blend.h> | |
| #include <drm/drm_crtc.h> | |
| #include <drm/drm_fb_dma_helper.h> | |
| #include <drm/drm_fourcc.h> | |
| #include <drm/drm_framebuffer.h> | |
| #include <drm/drm_gem_atomic_helper.h> | |
| #include <drm/drm_gem_dma_helper.h> | |
| #include <drm/drm_print.h> | |
| #include <drm/drm_probe_helper.h> | |
| #include "sun8i_mixer.h" | |
| #include "sun8i_ui_layer.h" | |
| #include "sun8i_ui_scaler.h" | |
| #include "sun8i_vi_scaler.h" | |
| static void sun8i_ui_layer_disable(struct sun8i_layer *layer) | |
| { | |
| u32 ch_base = sun8i_channel_base(layer); | |
| regmap_write(layer->regs, | |
| SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch_base, layer->overlay), 0); | |
| } | |
| static void sun8i_ui_layer_update_attributes(struct sun8i_layer *layer, | |
| struct drm_plane *plane) | |
| { | |
| struct drm_plane_state *state = plane->state; | |
| const struct drm_format_info *fmt; | |
| u32 val, ch_base, hw_fmt; | |
| ch_base = sun8i_channel_base(layer); | |
| fmt = state->fb->format; | |
| sun8i_mixer_drm_format_to_hw(fmt->format, &hw_fmt); | |
| val = SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA(state->alpha >> 8); | |
| val |= (state->alpha == DRM_BLEND_ALPHA_OPAQUE) ? | |
| SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_PIXEL : | |
| SUN8I_MIXER_CHAN_UI_LAYER_ATTR_ALPHA_MODE_COMBINED; | |
| val |= hw_fmt << SUN8I_MIXER_CHAN_UI_LAYER_ATTR_FBFMT_OFFSET; | |
| val |= SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN; | |
| regmap_write(layer->regs, | |
| SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch_base, layer->overlay), val); | |
| } | |
| static void sun8i_ui_layer_update_coord(struct sun8i_layer *layer, | |
| struct drm_plane *plane) | |
| { | |
| struct drm_plane_state *state = plane->state; | |
| u32 src_w, src_h, dst_w, dst_h; | |
| u32 outsize, insize; | |
| u32 hphase, vphase; | |
| u32 ch_base; | |
| DRM_DEBUG_DRIVER("Updating UI channel %d overlay %d\n", | |
| layer->channel, layer->overlay); | |
| ch_base = sun8i_channel_base(layer); | |
| src_w = drm_rect_width(&state->src) >> 16; | |
| src_h = drm_rect_height(&state->src) >> 16; | |
| dst_w = drm_rect_width(&state->dst); | |
| dst_h = drm_rect_height(&state->dst); | |
| hphase = state->src.x1 & 0xffff; | |
| vphase = state->src.y1 & 0xffff; | |
| insize = SUN8I_MIXER_SIZE(src_w, src_h); | |
| outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); | |
| /* Set height and width */ | |
| DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", | |
| state->src.x1 >> 16, state->src.y1 >> 16); | |
| DRM_DEBUG_DRIVER("Layer source size W: %d H: %d\n", src_w, src_h); | |
| regmap_write(layer->regs, | |
| SUN8I_MIXER_CHAN_UI_LAYER_SIZE(ch_base, layer->overlay), | |
| insize); | |
| regmap_write(layer->regs, | |
| SUN8I_MIXER_CHAN_UI_OVL_SIZE(ch_base), | |
| insize); | |
| if (insize != outsize || hphase || vphase) { | |
| u32 hscale, vscale; | |
| DRM_DEBUG_DRIVER("HW scaling is enabled\n"); | |
| hscale = state->src_w / state->crtc_w; | |
| vscale = state->src_h / state->crtc_h; | |
| if (layer->cfg->de_type == SUN8I_MIXER_DE33) { | |
| sun8i_vi_scaler_setup(layer, src_w, src_h, dst_w, dst_h, | |
| hscale, vscale, hphase, vphase, | |
| state->fb->format); | |
| sun8i_vi_scaler_enable(layer, true); | |
| } else { | |
| sun8i_ui_scaler_setup(layer, src_w, src_h, dst_w, dst_h, | |
| hscale, vscale, hphase, vphase); | |
| sun8i_ui_scaler_enable(layer, true); | |
| } | |
| } else { | |
| DRM_DEBUG_DRIVER("HW scaling is not needed\n"); | |
| if (layer->cfg->de_type == SUN8I_MIXER_DE33) | |
| sun8i_vi_scaler_enable(layer, false); | |
| else | |
| sun8i_ui_scaler_enable(layer, false); | |
| } | |
| } | |
| static void sun8i_ui_layer_update_buffer(struct sun8i_layer *layer, | |
| struct drm_plane *plane) | |
| { | |
| struct drm_plane_state *state = plane->state; | |
| struct drm_framebuffer *fb = state->fb; | |
| dma_addr_t dma_addr; | |
| u32 ch_base; | |
| ch_base = sun8i_channel_base(layer); | |
| /* Get the start of the displayed memory */ | |
| dma_addr = drm_fb_dma_get_gem_addr(fb, state, 0); | |
| /* Set the line width */ | |
| DRM_DEBUG_DRIVER("Layer line width: %d bytes\n", fb->pitches[0]); | |
| regmap_write(layer->regs, | |
| SUN8I_MIXER_CHAN_UI_LAYER_PITCH(ch_base, layer->overlay), | |
| fb->pitches[0]); | |
| DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &dma_addr); | |
| regmap_write(layer->regs, | |
| SUN8I_MIXER_CHAN_UI_LAYER_TOP_LADDR(ch_base, layer->overlay), | |
| lower_32_bits(dma_addr)); | |
| } | |
| static int sun8i_ui_layer_atomic_check(struct drm_plane *plane, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, | |
| plane); | |
| struct sun8i_layer *layer = plane_to_sun8i_layer(plane); | |
| struct drm_crtc *crtc = new_plane_state->crtc; | |
| struct drm_crtc_state *crtc_state; | |
| const struct drm_format_info *fmt; | |
| int min_scale, max_scale, ret; | |
| u32 hw_fmt; | |
| if (!crtc) | |
| return 0; | |
| crtc_state = drm_atomic_get_new_crtc_state(state, crtc); | |
| if (WARN_ON(!crtc_state)) | |
| return -EINVAL; | |
| fmt = new_plane_state->fb->format; | |
| ret = sun8i_mixer_drm_format_to_hw(fmt->format, &hw_fmt); | |
| if (ret || fmt->is_yuv) { | |
| DRM_DEBUG_DRIVER("Invalid plane format\n"); | |
| return -EINVAL; | |
| } | |
| min_scale = DRM_PLANE_NO_SCALING; | |
| max_scale = DRM_PLANE_NO_SCALING; | |
| if (layer->cfg->scaler_mask & BIT(layer->channel)) { | |
| min_scale = SUN8I_UI_SCALER_SCALE_MIN; | |
| max_scale = SUN8I_UI_SCALER_SCALE_MAX; | |
| } | |
| return drm_atomic_helper_check_plane_state(new_plane_state, | |
| crtc_state, | |
| min_scale, max_scale, | |
| true, true); | |
| } | |
| static void sun8i_ui_layer_atomic_update(struct drm_plane *plane, | |
| struct drm_atomic_commit *state) | |
| { | |
| struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, | |
| plane); | |
| struct sun8i_layer *layer = plane_to_sun8i_layer(plane); | |
| if (!new_state->crtc || !new_state->visible) { | |
| sun8i_ui_layer_disable(layer); | |
| return; | |
| } | |
| sun8i_ui_layer_update_attributes(layer, plane); | |
| sun8i_ui_layer_update_coord(layer, plane); | |
| sun8i_ui_layer_update_buffer(layer, plane); | |
| } | |
| static const struct drm_plane_helper_funcs sun8i_ui_layer_helper_funcs = { | |
| .atomic_check = sun8i_ui_layer_atomic_check, | |
| .atomic_update = sun8i_ui_layer_atomic_update, | |
| }; | |
| static const struct drm_plane_funcs sun8i_ui_layer_funcs = { | |
| .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, | |
| .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, | |
| .destroy = drm_plane_cleanup, | |
| .disable_plane = drm_atomic_helper_disable_plane, | |
| .reset = drm_atomic_helper_plane_reset, | |
| .update_plane = drm_atomic_helper_update_plane, | |
| }; | |
| static const u32 sun8i_ui_layer_formats[] = { | |
| DRM_FORMAT_ABGR1555, | |
| DRM_FORMAT_ABGR4444, | |
| DRM_FORMAT_ABGR8888, | |
| DRM_FORMAT_ARGB1555, | |
| DRM_FORMAT_ARGB4444, | |
| DRM_FORMAT_ARGB8888, | |
| DRM_FORMAT_BGR565, | |
| DRM_FORMAT_BGR888, | |
| DRM_FORMAT_BGRA5551, | |
| DRM_FORMAT_BGRA4444, | |
| DRM_FORMAT_BGRA8888, | |
| DRM_FORMAT_BGRX8888, | |
| DRM_FORMAT_RGB565, | |
| DRM_FORMAT_RGB888, | |
| DRM_FORMAT_RGBA4444, | |
| DRM_FORMAT_RGBA5551, | |
| DRM_FORMAT_RGBA8888, | |
| DRM_FORMAT_RGBX8888, | |
| DRM_FORMAT_XBGR8888, | |
| DRM_FORMAT_XRGB8888, | |
| }; | |
| static const uint64_t sun8i_layer_modifiers[] = { | |
| DRM_FORMAT_MOD_LINEAR, | |
| DRM_FORMAT_MOD_INVALID | |
| }; | |
| struct sun8i_layer *sun8i_ui_layer_init_one(struct drm_device *drm, | |
| enum drm_plane_type type, | |
| struct regmap *regs, | |
| int index, int phy_index, | |
| int plane_cnt, | |
| const struct sun8i_layer_cfg *cfg) | |
| { | |
| struct sun8i_layer *layer; | |
| int ret; | |
| layer = devm_kzalloc(drm->dev, sizeof(*layer), GFP_KERNEL); | |
| if (!layer) | |
| return ERR_PTR(-ENOMEM); | |
| layer->type = SUN8I_LAYER_TYPE_UI; | |
| layer->index = index; | |
| layer->channel = phy_index; | |
| layer->overlay = 0; | |
| layer->regs = regs; | |
| layer->cfg = cfg; | |
| /* possible crtcs are set later */ | |
| ret = drm_universal_plane_init(drm, &layer->plane, 0, | |
| &sun8i_ui_layer_funcs, | |
| sun8i_ui_layer_formats, | |
| ARRAY_SIZE(sun8i_ui_layer_formats), | |
| sun8i_layer_modifiers, type, NULL); | |
| if (ret) { | |
| dev_err(drm->dev, "Couldn't initialize layer\n"); | |
| return ERR_PTR(ret); | |
| } | |
| ret = drm_plane_create_alpha_property(&layer->plane); | |
| if (ret) { | |
| dev_err(drm->dev, "Couldn't add alpha property\n"); | |
| return ERR_PTR(ret); | |
| } | |
| ret = drm_plane_create_zpos_property(&layer->plane, index, | |
| 0, plane_cnt - 1); | |
| if (ret) { | |
| dev_err(drm->dev, "Couldn't add zpos property\n"); | |
| return ERR_PTR(ret); | |
| } | |
| drm_plane_helper_add(&layer->plane, &sun8i_ui_layer_helper_funcs); | |
| return layer; | |
| } |