| #!/bin/bash | |
| # SPDX-License-Identifier: GPL-2.0 | |
| ipv6=true | |
| source ./hsr_common.sh | |
| optstring="h4" | |
| usage() { | |
| echo "Usage: $0 [OPTION]" | |
| echo -e "\t-4: IPv4 only: disable IPv6 tests (default: test both IPv4 and IPv6)" | |
| } | |
| while getopts "$optstring" option;do | |
| case "$option" in | |
| "h") | |
| usage "$0" | |
| exit 0 | |
| ;; | |
| "4") | |
| ipv6=false | |
| ;; | |
| "?") | |
| usage "$0" | |
| exit 1 | |
| ;; | |
| esac | |
| done | |
| setup_prp_interfaces() | |
| { | |
| echo "INFO: Preparing interfaces for PRP" | |
| # Two PRP nodes, connected by two links (treated as LAN A and LAN B). | |
| # | |
| # vethA ----- vethA | |
| # prp1 prp2 | |
| # vethB ----- vethB | |
| # | |
| # node1 node2 | |
| # Interfaces | |
| # shellcheck disable=SC2154 # variables assigned by setup_ns | |
| ip link add vethA netns "$node1" type veth peer name vethA netns "$node2" | |
| ip link add vethB netns "$node1" type veth peer name vethB netns "$node2" | |
| # MAC addresses will be copied from LAN A interface | |
| ip -net "$node1" link set address 00:11:22:00:00:01 dev vethA | |
| ip -net "$node2" link set address 00:11:22:00:00:02 dev vethA | |
| # PRP | |
| ip -net "$node1" link add name prp1 type hsr \ | |
| slave1 vethA slave2 vethB supervision 45 proto 1 | |
| ip -net "$node2" link add name prp2 type hsr \ | |
| slave1 vethA slave2 vethB supervision 45 proto 1 | |
| # IP addresses | |
| ip -net "$node1" addr add 100.64.0.1/24 dev prp1 | |
| ip -net "$node1" addr add dead:beef:0::1/64 dev prp1 nodad | |
| ip -net "$node2" addr add 100.64.0.2/24 dev prp2 | |
| ip -net "$node2" addr add dead:beef:0::2/64 dev prp2 nodad | |
| # All links up | |
| ip -net "$node1" link set vethA up | |
| ip -net "$node1" link set vethB up | |
| ip -net "$node1" link set prp1 up | |
| ip -net "$node2" link set vethA up | |
| ip -net "$node2" link set vethB up | |
| ip -net "$node2" link set prp2 up | |
| } | |
| setup_vlan_interfaces() | |
| { | |
| # Interfaces | |
| ip -net "$node1" link add link prp1 name prp1.2 type vlan id 2 | |
| ip -net "$node2" link add link prp2 name prp2.2 type vlan id 2 | |
| # IP addresses | |
| ip -net "$node1" addr add 100.64.2.1/24 dev prp1.2 | |
| ip -net "$node1" addr add dead:beef:2::1/64 dev prp1.2 nodad | |
| ip -net "$node2" addr add 100.64.2.2/24 dev prp2.2 | |
| ip -net "$node2" addr add dead:beef:2::2/64 dev prp2.2 nodad | |
| # All links up | |
| ip -net "$node1" link set prp1.2 up | |
| ip -net "$node2" link set prp2.2 up | |
| } | |
| do_ping_tests() | |
| { | |
| local netid="$1" | |
| echo "INFO: Initial validation ping" | |
| do_ping "$node1" "100.64.$netid.2" | |
| do_ping "$node2" "100.64.$netid.1" | |
| stop_if_error "Initial validation failed on IPv4" | |
| do_ping "$node1" "dead:beef:$netid::2" | |
| do_ping "$node2" "dead:beef:$netid::1" | |
| stop_if_error "Initial validation failed on IPv6" | |
| echo "INFO: Longer ping test." | |
| do_ping_long "$node1" "100.64.$netid.2" | |
| do_ping_long "$node2" "100.64.$netid.1" | |
| stop_if_error "Longer ping test failed on IPv4." | |
| do_ping_long "$node1" "dead:beef:$netid::2" | |
| do_ping_long "$node2" "dead:beef:$netid::1" | |
| stop_if_error "Longer ping test failed on IPv6." | |
| } | |
| run_ping_tests() | |
| { | |
| echo "INFO: Running ping tests" | |
| do_ping_tests 0 | |
| } | |
| run_vlan_ping_tests() | |
| { | |
| vlan_challenged_prp1=$(ip net exec "$node1" ethtool -k prp1 | \ | |
| grep "vlan-challenged" | awk '{print $2}') | |
| vlan_challenged_prp2=$(ip net exec "$node2" ethtool -k prp2 | \ | |
| grep "vlan-challenged" | awk '{print $2}') | |
| if [[ "$vlan_challenged_prp1" = "off" || \ | |
| "$vlan_challenged_prp2" = "off" ]]; then | |
| echo "INFO: Running VLAN ping tests" | |
| setup_vlan_interfaces | |
| do_ping_tests 2 | |
| else | |
| echo "INFO: Not Running VLAN tests as the device does not support VLAN" | |
| fi | |
| } | |
| check_prerequisites | |
| trap cleanup_all_ns EXIT | |
| setup_ns node1 node2 | |
| setup_prp_interfaces | |
| run_ping_tests | |
| run_vlan_ping_tests | |
| exit $ret |