| #!/bin/bash | |
| # SPDX-License-Identifier: GPL-2.0 | |
| source lib.sh | |
| TESTS=" | |
| basic_tx_ipv4 | |
| basic_tx_ipv6 | |
| learning | |
| proxy_ipv4 | |
| proxy_ipv6 | |
| " | |
| VERBOSE=0 | |
| ################################################################################ | |
| # Utilities | |
| run_cmd() | |
| { | |
| local cmd="$1" | |
| local out | |
| local stderr="2>/dev/null" | |
| if [ "$VERBOSE" = "1" ]; then | |
| echo "COMMAND: $cmd" | |
| stderr= | |
| fi | |
| out=$(eval "$cmd" "$stderr") | |
| rc=$? | |
| if [ "$VERBOSE" -eq 1 ] && [ -n "$out" ]; then | |
| echo " $out" | |
| fi | |
| return $rc | |
| } | |
| ################################################################################ | |
| # Cleanup | |
| exit_cleanup_all() | |
| { | |
| cleanup_all_ns | |
| exit "${EXIT_STATUS}" | |
| } | |
| ################################################################################ | |
| # Tests | |
| nh_stats_get() | |
| { | |
| ip -n "$ns1" -s -j nexthop show id 10 | jq ".[][\"group_stats\"][][\"packets\"]" | |
| } | |
| tc_stats_get() | |
| { | |
| tc_rule_handle_stats_get "dev dummy1 egress" 101 ".packets" "-n $ns1" | |
| } | |
| nh_stats_get_port() | |
| { | |
| ip -n "$ns1" -s -j nexthop show id 20 | \ | |
| jq ".[][\"group_stats\"][][\"packets\"]" | |
| } | |
| tc_stats_get_port() | |
| { | |
| tc_rule_handle_stats_get "dev dummy1 egress" 102 ".packets" "-n $ns1" | |
| } | |
| basic_tx_common() | |
| { | |
| local af_str=$1; shift | |
| local proto=$1; shift | |
| local local_addr=$1; shift | |
| local plen=$1; shift | |
| local remote_addr=$1; shift | |
| RET=0 | |
| # Test basic Tx functionality. Check that stats are incremented on | |
| # both the FDB nexthop group and the egress device. | |
| run_cmd "ip -n $ns1 link add name dummy1 up type dummy" | |
| run_cmd "ip -n $ns1 route add $remote_addr/$plen dev dummy1" | |
| run_cmd "tc -n $ns1 qdisc add dev dummy1 clsact" | |
| run_cmd "tc -n $ns1 filter add dev dummy1 egress proto $proto pref 1 handle 101 flower ip_proto udp dst_ip $remote_addr dst_port 4789 action pass" | |
| run_cmd "ip -n $ns1 address add $local_addr/$plen dev lo" | |
| run_cmd "ip -n $ns1 nexthop add id 1 via $remote_addr fdb" | |
| run_cmd "ip -n $ns1 nexthop add id 10 group 1 fdb" | |
| run_cmd "ip -n $ns1 link add name vx0 up type vxlan id 10010 local $local_addr dstport 4789" | |
| run_cmd "bridge -n $ns1 fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10" | |
| run_cmd "ip netns exec $ns1 mausezahn vx0 -a own -b 00:11:22:33:44:55 -c 1 -q" | |
| busywait "$BUSYWAIT_TIMEOUT" until_counter_is "== 1" nh_stats_get > /dev/null | |
| check_err $? "FDB nexthop group stats did not increase" | |
| busywait "$BUSYWAIT_TIMEOUT" until_counter_is "== 1" tc_stats_get > /dev/null | |
| check_err $? "tc filter stats did not increase" | |
| # Add a second FDB nexthop group whose nexthop carries a per-nexthop | |
| # destination port (NHA_DST_PORT) that differs from the VXLAN device | |
| # default. Matching outer traffic must egress with that port, so a | |
| # separate flower filter keyed on the new port catches it. | |
| run_cmd "tc -n $ns1 filter add dev dummy1 egress proto $proto \ | |
| pref 1 handle 102 flower ip_proto udp dst_ip $remote_addr \ | |
| dst_port 4790 action pass" | |
| run_cmd "ip -n $ns1 nexthop add id 2 via $remote_addr fdb dst_port 4790" | |
| run_cmd "ip -n $ns1 nexthop add id 20 group 2 fdb" | |
| run_cmd "bridge -n $ns1 fdb add 00:11:22:33:44:66 dev vx0 \ | |
| self static nhid 20" | |
| run_cmd "ip netns exec $ns1 mausezahn vx0 -a own \ | |
| -b 00:11:22:33:44:66 -c 1 -q" | |
| busywait "$BUSYWAIT_TIMEOUT" until_counter_is "== 1" \ | |
| nh_stats_get_port > /dev/null | |
| check_err $? "FDB nexthop group stats did not increase (with port)" | |
| busywait "$BUSYWAIT_TIMEOUT" until_counter_is "== 1" \ | |
| tc_stats_get_port > /dev/null | |
| check_err $? "tc filter stats did not increase (with port)" | |
| log_test "VXLAN FDB nexthop: $af_str basic Tx" | |
| } | |
| basic_tx_ipv4() | |
| { | |
| basic_tx_common "IPv4" ipv4 192.0.2.1 32 192.0.2.2 | |
| } | |
| basic_tx_ipv6() | |
| { | |
| basic_tx_common "IPv6" ipv6 2001:db8:1::1 128 2001:db8:1::2 | |
| } | |
| learning() | |
| { | |
| RET=0 | |
| # When learning is enabled on the VXLAN device, an incoming packet | |
| # might try to refresh an FDB entry that points to an FDB nexthop group | |
| # instead of an ordinary remote destination. Check that the kernel does | |
| # not crash in this situation. | |
| run_cmd "ip -n $ns1 address add 192.0.2.1/32 dev lo" | |
| run_cmd "ip -n $ns1 address add 192.0.2.2/32 dev lo" | |
| run_cmd "ip -n $ns1 nexthop add id 1 via 192.0.2.3 fdb" | |
| run_cmd "ip -n $ns1 nexthop add id 10 group 1 fdb" | |
| run_cmd "ip -n $ns1 link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass" | |
| run_cmd "ip -n $ns1 link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning" | |
| run_cmd "bridge -n $ns1 fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020" | |
| run_cmd "bridge -n $ns1 fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10" | |
| run_cmd "ip netns exec $ns1 mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q" | |
| log_test "VXLAN FDB nexthop: learning" | |
| } | |
| proxy_common() | |
| { | |
| local af_str=$1; shift | |
| local local_addr=$1; shift | |
| local plen=$1; shift | |
| local remote_addr=$1; shift | |
| local neigh_addr=$1; shift | |
| local ping_cmd=$1; shift | |
| RET=0 | |
| # When the "proxy" option is enabled on the VXLAN device, the device | |
| # will suppress ARP requests and IPv6 Neighbor Solicitation messages if | |
| # it is able to reply on behalf of the remote host. That is, if a | |
| # matching and valid neighbor entry is configured on the VXLAN device | |
| # whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The | |
| # FDB entry for the neighbor's MAC address might point to an FDB | |
| # nexthop group instead of an ordinary remote destination. Check that | |
| # the kernel does not crash in this situation. | |
| run_cmd "ip -n $ns1 address add $local_addr/$plen dev lo" | |
| run_cmd "ip -n $ns1 nexthop add id 1 via $remote_addr fdb" | |
| run_cmd "ip -n $ns1 nexthop add id 10 group 1 fdb" | |
| run_cmd "ip -n $ns1 link add name vx0 up type vxlan id 10010 local $local_addr dstport 4789 proxy" | |
| run_cmd "ip -n $ns1 neigh add $neigh_addr lladdr 00:11:22:33:44:55 nud perm dev vx0" | |
| run_cmd "bridge -n $ns1 fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10" | |
| run_cmd "ip netns exec $ns1 $ping_cmd" | |
| log_test "VXLAN FDB nexthop: $af_str proxy" | |
| } | |
| proxy_ipv4() | |
| { | |
| proxy_common "IPv4" 192.0.2.1 32 192.0.2.2 192.0.2.3 \ | |
| "arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3" | |
| } | |
| proxy_ipv6() | |
| { | |
| proxy_common "IPv6" 2001:db8:1::1 128 2001:db8:1::2 2001:db8:1::3 \ | |
| "ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0" | |
| } | |
| ################################################################################ | |
| # Usage | |
| usage() | |
| { | |
| cat <<EOF | |
| usage: ${0##*/} OPTS | |
| -t <test> Test(s) to run (default: all) | |
| (options: $TESTS) | |
| -p Pause on fail | |
| -v Verbose mode (show commands and output) | |
| EOF | |
| } | |
| ################################################################################ | |
| # Main | |
| while getopts ":t:pvh" opt; do | |
| case $opt in | |
| t) TESTS=$OPTARG;; | |
| p) PAUSE_ON_FAIL=yes;; | |
| v) VERBOSE=$((VERBOSE + 1));; | |
| h) usage; exit 0;; | |
| *) usage; exit 1;; | |
| esac | |
| done | |
| require_command mausezahn | |
| require_command arping | |
| require_command ndisc6 | |
| require_command jq | |
| if ! ip nexthop help 2>&1 | grep -q "dst_port"; then | |
| echo "SKIP: iproute2 ip too old, missing nexthop dst_port support" | |
| exit "$ksft_skip" | |
| fi | |
| trap exit_cleanup_all EXIT | |
| for t in $TESTS | |
| do | |
| setup_ns ns1; $t; cleanup_all_ns; | |
| done |