| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/input/touchscreen/semtech,sx8654.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Semtech SX8654 I2C Touchscreen Controller |
| |
| maintainers: |
| - Frank Li <Frank.Li@nxp.com> |
| |
| properties: |
| compatible: |
| enum: |
| - semtech,sx8650 |
| - semtech,sx8654 |
| - semtech,sx8655 |
| - semtech,sx8656 |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| reset-gpios: |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| touchscreen@48 { |
| compatible = "semtech,sx8654"; |
| reg = <0x48>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
