| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Integrator/AP timer driver | 
 |  * Copyright (C) 2000-2003 Deep Blue Solutions Ltd | 
 |  * Copyright (c) 2014, Linaro Limited | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/clocksource.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_irq.h> | 
 | #include <linux/of_address.h> | 
 | #include <linux/clockchips.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/sched_clock.h> | 
 |  | 
 | #include "timer-sp.h" | 
 |  | 
 | static void __iomem * sched_clk_base; | 
 |  | 
 | static u64 notrace integrator_read_sched_clock(void) | 
 | { | 
 | 	return -readl(sched_clk_base + TIMER_VALUE); | 
 | } | 
 |  | 
 | static int __init integrator_clocksource_init(unsigned long inrate, | 
 | 					      void __iomem *base) | 
 | { | 
 | 	u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; | 
 | 	unsigned long rate = inrate; | 
 | 	int ret; | 
 |  | 
 | 	if (rate >= 1500000) { | 
 | 		rate /= 16; | 
 | 		ctrl |= TIMER_CTRL_DIV16; | 
 | 	} | 
 |  | 
 | 	writel(0xffff, base + TIMER_LOAD); | 
 | 	writel(ctrl, base + TIMER_CTRL); | 
 |  | 
 | 	ret = clocksource_mmio_init(base + TIMER_VALUE, "timer2", | 
 | 				    rate, 200, 16, clocksource_mmio_readl_down); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	sched_clk_base = base; | 
 | 	sched_clock_register(integrator_read_sched_clock, 16, rate); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static unsigned long timer_reload; | 
 | static void __iomem * clkevt_base; | 
 |  | 
 | /* | 
 |  * IRQ handler for the timer | 
 |  */ | 
 | static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) | 
 | { | 
 | 	struct clock_event_device *evt = dev_id; | 
 |  | 
 | 	/* clear the interrupt */ | 
 | 	writel(1, clkevt_base + TIMER_INTCLR); | 
 |  | 
 | 	evt->event_handler(evt); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int clkevt_shutdown(struct clock_event_device *evt) | 
 | { | 
 | 	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; | 
 |  | 
 | 	/* Disable timer */ | 
 | 	writel(ctrl, clkevt_base + TIMER_CTRL); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int clkevt_set_oneshot(struct clock_event_device *evt) | 
 | { | 
 | 	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & | 
 | 		   ~(TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC); | 
 |  | 
 | 	/* Leave the timer disabled, .set_next_event will enable it */ | 
 | 	writel(ctrl, clkevt_base + TIMER_CTRL); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int clkevt_set_periodic(struct clock_event_device *evt) | 
 | { | 
 | 	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; | 
 |  | 
 | 	/* Disable timer */ | 
 | 	writel(ctrl, clkevt_base + TIMER_CTRL); | 
 |  | 
 | 	/* Enable the timer and start the periodic tick */ | 
 | 	writel(timer_reload, clkevt_base + TIMER_LOAD); | 
 | 	ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; | 
 | 	writel(ctrl, clkevt_base + TIMER_CTRL); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) | 
 | { | 
 | 	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); | 
 |  | 
 | 	writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); | 
 | 	writel(next, clkevt_base + TIMER_LOAD); | 
 | 	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct clock_event_device integrator_clockevent = { | 
 | 	.name			= "timer1", | 
 | 	.features		= CLOCK_EVT_FEAT_PERIODIC | | 
 | 				  CLOCK_EVT_FEAT_ONESHOT, | 
 | 	.set_state_shutdown	= clkevt_shutdown, | 
 | 	.set_state_periodic	= clkevt_set_periodic, | 
 | 	.set_state_oneshot	= clkevt_set_oneshot, | 
 | 	.tick_resume		= clkevt_shutdown, | 
 | 	.set_next_event		= clkevt_set_next_event, | 
 | 	.rating			= 300, | 
 | }; | 
 |  | 
 | static int integrator_clockevent_init(unsigned long inrate, | 
 | 				      void __iomem *base, int irq) | 
 | { | 
 | 	unsigned long rate = inrate; | 
 | 	unsigned int ctrl = 0; | 
 | 	int ret; | 
 |  | 
 | 	clkevt_base = base; | 
 | 	/* Calculate and program a divisor */ | 
 | 	if (rate > 0x100000 * HZ) { | 
 | 		rate /= 256; | 
 | 		ctrl |= TIMER_CTRL_DIV256; | 
 | 	} else if (rate > 0x10000 * HZ) { | 
 | 		rate /= 16; | 
 | 		ctrl |= TIMER_CTRL_DIV16; | 
 | 	} | 
 | 	timer_reload = rate / HZ; | 
 | 	writel(ctrl, clkevt_base + TIMER_CTRL); | 
 |  | 
 | 	ret = request_irq(irq, integrator_timer_interrupt, | 
 | 			  IRQF_TIMER | IRQF_IRQPOLL, "timer", | 
 | 			  &integrator_clockevent); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	clockevents_config_and_register(&integrator_clockevent, | 
 | 					rate, | 
 | 					1, | 
 | 					0xffffU); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init integrator_ap_timer_init_of(struct device_node *node) | 
 | { | 
 | 	const char *path; | 
 | 	void __iomem *base; | 
 | 	int err; | 
 | 	int irq; | 
 | 	struct clk *clk; | 
 | 	unsigned long rate; | 
 | 	struct device_node *alias_node; | 
 |  | 
 | 	base = of_io_request_and_map(node, 0, "integrator-timer"); | 
 | 	if (IS_ERR(base)) | 
 | 		return PTR_ERR(base); | 
 |  | 
 | 	clk = of_clk_get(node, 0); | 
 | 	if (IS_ERR(clk)) { | 
 | 		pr_err("No clock for %pOFn\n", node); | 
 | 		return PTR_ERR(clk); | 
 | 	} | 
 | 	clk_prepare_enable(clk); | 
 | 	rate = clk_get_rate(clk); | 
 | 	writel(0, base + TIMER_CTRL); | 
 |  | 
 | 	err = of_property_read_string(of_aliases, | 
 | 				"arm,timer-primary", &path); | 
 | 	if (err) { | 
 | 		pr_warn("Failed to read property\n"); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	alias_node = of_find_node_by_path(path); | 
 |  | 
 | 	/* | 
 | 	 * The pointer is used as an identifier not as a pointer, we | 
 | 	 * can drop the refcount on the of__node immediately after | 
 | 	 * getting it. | 
 | 	 */ | 
 | 	of_node_put(alias_node); | 
 |  | 
 | 	if (node == alias_node) | 
 | 		/* The primary timer lacks IRQ, use as clocksource */ | 
 | 		return integrator_clocksource_init(rate, base); | 
 |  | 
 | 	err = of_property_read_string(of_aliases, | 
 | 				"arm,timer-secondary", &path); | 
 | 	if (err) { | 
 | 		pr_warn("Failed to read property\n"); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	alias_node = of_find_node_by_path(path); | 
 |  | 
 | 	of_node_put(alias_node); | 
 |  | 
 | 	if (node == alias_node) { | 
 | 		/* The secondary timer will drive the clock event */ | 
 | 		irq = irq_of_parse_and_map(node, 0); | 
 | 		return integrator_clockevent_init(rate, base, irq); | 
 | 	} | 
 |  | 
 | 	pr_info("Timer @%p unused\n", base); | 
 | 	clk_disable_unprepare(clk); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | TIMER_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer", | 
 | 		       integrator_ap_timer_init_of); |