|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * System Control and Management Interface (SCMI) Sensor Protocol | 
|  | * | 
|  | * Copyright (C) 2018-2022 ARM Ltd. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt | 
|  |  | 
|  | #include <linux/bitfield.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/scmi_protocol.h> | 
|  |  | 
|  | #include "protocols.h" | 
|  | #include "notify.h" | 
|  |  | 
|  | /* Updated only after ALL the mandatory features for that version are merged */ | 
|  | #define SCMI_PROTOCOL_SUPPORTED_VERSION		0x30001 | 
|  |  | 
|  | #define SCMI_MAX_NUM_SENSOR_AXIS	63 | 
|  | #define	SCMIv2_SENSOR_PROTOCOL		0x10000 | 
|  |  | 
|  | enum scmi_sensor_protocol_cmd { | 
|  | SENSOR_DESCRIPTION_GET = 0x3, | 
|  | SENSOR_TRIP_POINT_NOTIFY = 0x4, | 
|  | SENSOR_TRIP_POINT_CONFIG = 0x5, | 
|  | SENSOR_READING_GET = 0x6, | 
|  | SENSOR_AXIS_DESCRIPTION_GET = 0x7, | 
|  | SENSOR_LIST_UPDATE_INTERVALS = 0x8, | 
|  | SENSOR_CONFIG_GET = 0x9, | 
|  | SENSOR_CONFIG_SET = 0xA, | 
|  | SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB, | 
|  | SENSOR_NAME_GET = 0xC, | 
|  | SENSOR_AXIS_NAME_GET = 0xD, | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_resp_sensor_attributes { | 
|  | __le16 num_sensors; | 
|  | u8 max_requests; | 
|  | u8 reserved; | 
|  | __le32 reg_addr_low; | 
|  | __le32 reg_addr_high; | 
|  | __le32 reg_size; | 
|  | }; | 
|  |  | 
|  | /* v3 attributes_low macros */ | 
|  | #define SUPPORTS_UPDATE_NOTIFY(x)	FIELD_GET(BIT(30), (x)) | 
|  | #define SENSOR_TSTAMP_EXP(x)		FIELD_GET(GENMASK(14, 10), (x)) | 
|  | #define SUPPORTS_TIMESTAMP(x)		FIELD_GET(BIT(9), (x)) | 
|  | #define SUPPORTS_EXTEND_ATTRS(x)	FIELD_GET(BIT(8), (x)) | 
|  |  | 
|  | /* v2 attributes_high macros */ | 
|  | #define SENSOR_UPDATE_BASE(x)		FIELD_GET(GENMASK(31, 27), (x)) | 
|  | #define SENSOR_UPDATE_SCALE(x)		FIELD_GET(GENMASK(26, 22), (x)) | 
|  |  | 
|  | /* v3 attributes_high macros */ | 
|  | #define SENSOR_AXIS_NUMBER(x)		FIELD_GET(GENMASK(21, 16), (x)) | 
|  | #define SUPPORTS_AXIS(x)		FIELD_GET(BIT(8), (x)) | 
|  |  | 
|  | /* v3 resolution macros */ | 
|  | #define SENSOR_RES(x)			FIELD_GET(GENMASK(26, 0), (x)) | 
|  | #define SENSOR_RES_EXP(x)		FIELD_GET(GENMASK(31, 27), (x)) | 
|  |  | 
|  | struct scmi_msg_resp_attrs { | 
|  | __le32 min_range_low; | 
|  | __le32 min_range_high; | 
|  | __le32 max_range_low; | 
|  | __le32 max_range_high; | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_sensor_description { | 
|  | __le32 desc_index; | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_resp_sensor_description { | 
|  | __le16 num_returned; | 
|  | __le16 num_remaining; | 
|  | struct scmi_sensor_descriptor { | 
|  | __le32 id; | 
|  | __le32 attributes_low; | 
|  | /* Common attributes_low macros */ | 
|  | #define SUPPORTS_ASYNC_READ(x)		FIELD_GET(BIT(31), (x)) | 
|  | #define SUPPORTS_EXTENDED_NAMES(x)	FIELD_GET(BIT(29), (x)) | 
|  | #define NUM_TRIP_POINTS(x)		FIELD_GET(GENMASK(7, 0), (x)) | 
|  | __le32 attributes_high; | 
|  | /* Common attributes_high macros */ | 
|  | #define SENSOR_SCALE(x)			FIELD_GET(GENMASK(15, 11), (x)) | 
|  | #define SENSOR_SCALE_SIGN		BIT(4) | 
|  | #define SENSOR_SCALE_EXTEND		GENMASK(31, 5) | 
|  | #define SENSOR_TYPE(x)			FIELD_GET(GENMASK(7, 0), (x)) | 
|  | u8 name[SCMI_SHORT_NAME_MAX_SIZE]; | 
|  | /* only for version > 2.0 */ | 
|  | __le32 power; | 
|  | __le32 resolution; | 
|  | struct scmi_msg_resp_attrs scalar_attrs; | 
|  | } desc[]; | 
|  | }; | 
|  |  | 
|  | /* Base scmi_sensor_descriptor size excluding extended attrs after name */ | 
|  | #define SCMI_MSG_RESP_SENS_DESCR_BASE_SZ	28 | 
|  |  | 
|  | /* Sign extend to a full s32 */ | 
|  | #define	S32_EXT(v)							\ | 
|  | ({								\ | 
|  | int __v = (v);						\ | 
|  | \ | 
|  | if (__v & SENSOR_SCALE_SIGN)				\ | 
|  | __v |= SENSOR_SCALE_EXTEND;			\ | 
|  | __v;							\ | 
|  | }) | 
|  |  | 
|  | struct scmi_msg_sensor_axis_description_get { | 
|  | __le32 id; | 
|  | __le32 axis_desc_index; | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_resp_sensor_axis_description { | 
|  | __le32 num_axis_flags; | 
|  | #define NUM_AXIS_RETURNED(x)		FIELD_GET(GENMASK(5, 0), (x)) | 
|  | #define NUM_AXIS_REMAINING(x)		FIELD_GET(GENMASK(31, 26), (x)) | 
|  | struct scmi_axis_descriptor { | 
|  | __le32 id; | 
|  | __le32 attributes_low; | 
|  | #define SUPPORTS_EXTENDED_AXIS_NAMES(x)	FIELD_GET(BIT(9), (x)) | 
|  | __le32 attributes_high; | 
|  | u8 name[SCMI_SHORT_NAME_MAX_SIZE]; | 
|  | __le32 resolution; | 
|  | struct scmi_msg_resp_attrs attrs; | 
|  | } desc[]; | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_resp_sensor_axis_names_description { | 
|  | __le32 num_axis_flags; | 
|  | struct scmi_sensor_axis_name_descriptor { | 
|  | __le32 axis_id; | 
|  | u8 name[SCMI_MAX_STR_SIZE]; | 
|  | } desc[]; | 
|  | }; | 
|  |  | 
|  | /* Base scmi_axis_descriptor size excluding extended attrs after name */ | 
|  | #define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ	28 | 
|  |  | 
|  | struct scmi_msg_sensor_list_update_intervals { | 
|  | __le32 id; | 
|  | __le32 index; | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_resp_sensor_list_update_intervals { | 
|  | __le32 num_intervals_flags; | 
|  | #define NUM_INTERVALS_RETURNED(x)	FIELD_GET(GENMASK(11, 0), (x)) | 
|  | #define SEGMENTED_INTVL_FORMAT(x)	FIELD_GET(BIT(12), (x)) | 
|  | #define NUM_INTERVALS_REMAINING(x)	FIELD_GET(GENMASK(31, 16), (x)) | 
|  | __le32 intervals[]; | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_sensor_request_notify { | 
|  | __le32 id; | 
|  | __le32 event_control; | 
|  | #define SENSOR_NOTIFY_ALL	BIT(0) | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_set_sensor_trip_point { | 
|  | __le32 id; | 
|  | __le32 event_control; | 
|  | #define SENSOR_TP_EVENT_MASK	(0x3) | 
|  | #define SENSOR_TP_DISABLED	0x0 | 
|  | #define SENSOR_TP_POSITIVE	0x1 | 
|  | #define SENSOR_TP_NEGATIVE	0x2 | 
|  | #define SENSOR_TP_BOTH		0x3 | 
|  | #define SENSOR_TP_ID(x)		(((x) & 0xff) << 4) | 
|  | __le32 value_low; | 
|  | __le32 value_high; | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_sensor_config_set { | 
|  | __le32 id; | 
|  | __le32 sensor_config; | 
|  | }; | 
|  |  | 
|  | struct scmi_msg_sensor_reading_get { | 
|  | __le32 id; | 
|  | __le32 flags; | 
|  | #define SENSOR_READ_ASYNC	BIT(0) | 
|  | }; | 
|  |  | 
|  | struct scmi_resp_sensor_reading_complete { | 
|  | __le32 id; | 
|  | __le32 readings_low; | 
|  | __le32 readings_high; | 
|  | }; | 
|  |  | 
|  | struct scmi_sensor_reading_resp { | 
|  | __le32 sensor_value_low; | 
|  | __le32 sensor_value_high; | 
|  | __le32 timestamp_low; | 
|  | __le32 timestamp_high; | 
|  | }; | 
|  |  | 
|  | struct scmi_resp_sensor_reading_complete_v3 { | 
|  | __le32 id; | 
|  | struct scmi_sensor_reading_resp readings[]; | 
|  | }; | 
|  |  | 
|  | struct scmi_sensor_trip_notify_payld { | 
|  | __le32 agent_id; | 
|  | __le32 sensor_id; | 
|  | __le32 trip_point_desc; | 
|  | }; | 
|  |  | 
|  | struct scmi_sensor_update_notify_payld { | 
|  | __le32 agent_id; | 
|  | __le32 sensor_id; | 
|  | struct scmi_sensor_reading_resp readings[]; | 
|  | }; | 
|  |  | 
|  | struct sensors_info { | 
|  | u32 version; | 
|  | bool notify_trip_point_cmd; | 
|  | bool notify_continuos_update_cmd; | 
|  | int num_sensors; | 
|  | int max_requests; | 
|  | u64 reg_addr; | 
|  | u32 reg_size; | 
|  | struct scmi_sensor_info *sensors; | 
|  | }; | 
|  |  | 
|  | static int scmi_sensor_attributes_get(const struct scmi_protocol_handle *ph, | 
|  | struct sensors_info *si) | 
|  | { | 
|  | int ret; | 
|  | struct scmi_xfer *t; | 
|  | struct scmi_msg_resp_sensor_attributes *attr; | 
|  |  | 
|  | ret = ph->xops->xfer_get_init(ph, PROTOCOL_ATTRIBUTES, | 
|  | 0, sizeof(*attr), &t); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | attr = t->rx.buf; | 
|  |  | 
|  | ret = ph->xops->do_xfer(ph, t); | 
|  | if (!ret) { | 
|  | si->num_sensors = le16_to_cpu(attr->num_sensors); | 
|  | si->max_requests = attr->max_requests; | 
|  | si->reg_addr = le32_to_cpu(attr->reg_addr_low) | | 
|  | (u64)le32_to_cpu(attr->reg_addr_high) << 32; | 
|  | si->reg_size = le32_to_cpu(attr->reg_size); | 
|  | } | 
|  |  | 
|  | ph->xops->xfer_put(ph, t); | 
|  |  | 
|  | if (!ret) { | 
|  | if (!ph->hops->protocol_msg_check(ph, | 
|  | SENSOR_TRIP_POINT_NOTIFY, NULL)) | 
|  | si->notify_trip_point_cmd = true; | 
|  |  | 
|  | if (!ph->hops->protocol_msg_check(ph, | 
|  | SENSOR_CONTINUOUS_UPDATE_NOTIFY, | 
|  | NULL)) | 
|  | si->notify_continuos_update_cmd = true; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline void scmi_parse_range_attrs(struct scmi_range_attrs *out, | 
|  | const struct scmi_msg_resp_attrs *in) | 
|  | { | 
|  | out->min_range = get_unaligned_le64((void *)&in->min_range_low); | 
|  | out->max_range = get_unaligned_le64((void *)&in->max_range_low); | 
|  | } | 
|  |  | 
|  | struct scmi_sens_ipriv { | 
|  | void *priv; | 
|  | struct device *dev; | 
|  | }; | 
|  |  | 
|  | static void iter_intervals_prepare_message(void *message, | 
|  | unsigned int desc_index, | 
|  | const void *p) | 
|  | { | 
|  | struct scmi_msg_sensor_list_update_intervals *msg = message; | 
|  | const struct scmi_sensor_info *s; | 
|  |  | 
|  | s = ((const struct scmi_sens_ipriv *)p)->priv; | 
|  | /* Set the number of sensors to be skipped/already read */ | 
|  | msg->id = cpu_to_le32(s->id); | 
|  | msg->index = cpu_to_le32(desc_index); | 
|  | } | 
|  |  | 
|  | static int iter_intervals_update_state(struct scmi_iterator_state *st, | 
|  | const void *response, void *p) | 
|  | { | 
|  | u32 flags; | 
|  | struct scmi_sensor_info *s = ((struct scmi_sens_ipriv *)p)->priv; | 
|  | struct device *dev = ((struct scmi_sens_ipriv *)p)->dev; | 
|  | const struct scmi_msg_resp_sensor_list_update_intervals *r = response; | 
|  |  | 
|  | flags = le32_to_cpu(r->num_intervals_flags); | 
|  | st->num_returned = NUM_INTERVALS_RETURNED(flags); | 
|  | st->num_remaining = NUM_INTERVALS_REMAINING(flags); | 
|  |  | 
|  | /* | 
|  | * Max intervals is not declared previously anywhere so we | 
|  | * assume it's returned+remaining on first call. | 
|  | */ | 
|  | if (!st->max_resources) { | 
|  | s->intervals.segmented = SEGMENTED_INTVL_FORMAT(flags); | 
|  | s->intervals.count = st->num_returned + st->num_remaining; | 
|  | /* segmented intervals are reported in one triplet */ | 
|  | if (s->intervals.segmented && | 
|  | (st->num_remaining || st->num_returned != 3)) { | 
|  | dev_err(dev, | 
|  | "Sensor ID:%d advertises an invalid segmented interval (%d)\n", | 
|  | s->id, s->intervals.count); | 
|  | s->intervals.segmented = false; | 
|  | s->intervals.count = 0; | 
|  | return -EINVAL; | 
|  | } | 
|  | /* Direct allocation when exceeding pre-allocated */ | 
|  | if (s->intervals.count >= SCMI_MAX_PREALLOC_POOL) { | 
|  | s->intervals.desc = | 
|  | devm_kcalloc(dev, | 
|  | s->intervals.count, | 
|  | sizeof(*s->intervals.desc), | 
|  | GFP_KERNEL); | 
|  | if (!s->intervals.desc) { | 
|  | s->intervals.segmented = false; | 
|  | s->intervals.count = 0; | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  |  | 
|  | st->max_resources = s->intervals.count; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iter_intervals_process_response(const struct scmi_protocol_handle *ph, | 
|  | const void *response, | 
|  | struct scmi_iterator_state *st, void *p) | 
|  | { | 
|  | const struct scmi_msg_resp_sensor_list_update_intervals *r = response; | 
|  | struct scmi_sensor_info *s = ((struct scmi_sens_ipriv *)p)->priv; | 
|  |  | 
|  | s->intervals.desc[st->desc_index + st->loop_idx] = | 
|  | le32_to_cpu(r->intervals[st->loop_idx]); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph, | 
|  | struct scmi_sensor_info *s) | 
|  | { | 
|  | void *iter; | 
|  | struct scmi_iterator_ops ops = { | 
|  | .prepare_message = iter_intervals_prepare_message, | 
|  | .update_state = iter_intervals_update_state, | 
|  | .process_response = iter_intervals_process_response, | 
|  | }; | 
|  | struct scmi_sens_ipriv upriv = { | 
|  | .priv = s, | 
|  | .dev = ph->dev, | 
|  | }; | 
|  |  | 
|  | iter = ph->hops->iter_response_init(ph, &ops, s->intervals.count, | 
|  | SENSOR_LIST_UPDATE_INTERVALS, | 
|  | sizeof(struct scmi_msg_sensor_list_update_intervals), | 
|  | &upriv); | 
|  | if (IS_ERR(iter)) | 
|  | return PTR_ERR(iter); | 
|  |  | 
|  | return ph->hops->iter_response_run(iter); | 
|  | } | 
|  |  | 
|  | struct scmi_apriv { | 
|  | bool any_axes_support_extended_names; | 
|  | struct scmi_sensor_info *s; | 
|  | }; | 
|  |  | 
|  | static void iter_axes_desc_prepare_message(void *message, | 
|  | const unsigned int desc_index, | 
|  | const void *priv) | 
|  | { | 
|  | struct scmi_msg_sensor_axis_description_get *msg = message; | 
|  | const struct scmi_apriv *apriv = priv; | 
|  |  | 
|  | /* Set the number of sensors to be skipped/already read */ | 
|  | msg->id = cpu_to_le32(apriv->s->id); | 
|  | msg->axis_desc_index = cpu_to_le32(desc_index); | 
|  | } | 
|  |  | 
|  | static int | 
|  | iter_axes_desc_update_state(struct scmi_iterator_state *st, | 
|  | const void *response, void *priv) | 
|  | { | 
|  | u32 flags; | 
|  | const struct scmi_msg_resp_sensor_axis_description *r = response; | 
|  |  | 
|  | flags = le32_to_cpu(r->num_axis_flags); | 
|  | st->num_returned = NUM_AXIS_RETURNED(flags); | 
|  | st->num_remaining = NUM_AXIS_REMAINING(flags); | 
|  | st->priv = (void *)&r->desc[0]; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iter_axes_desc_process_response(const struct scmi_protocol_handle *ph, | 
|  | const void *response, | 
|  | struct scmi_iterator_state *st, void *priv) | 
|  | { | 
|  | u32 attrh, attrl; | 
|  | struct scmi_sensor_axis_info *a; | 
|  | size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ; | 
|  | struct scmi_apriv *apriv = priv; | 
|  | const struct scmi_axis_descriptor *adesc = st->priv; | 
|  |  | 
|  | attrl = le32_to_cpu(adesc->attributes_low); | 
|  | if (SUPPORTS_EXTENDED_AXIS_NAMES(attrl)) | 
|  | apriv->any_axes_support_extended_names = true; | 
|  |  | 
|  | a = &apriv->s->axis[st->desc_index + st->loop_idx]; | 
|  | a->id = le32_to_cpu(adesc->id); | 
|  | a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl); | 
|  |  | 
|  | attrh = le32_to_cpu(adesc->attributes_high); | 
|  | a->scale = S32_EXT(SENSOR_SCALE(attrh)); | 
|  | a->type = SENSOR_TYPE(attrh); | 
|  | strscpy(a->name, adesc->name, SCMI_SHORT_NAME_MAX_SIZE); | 
|  |  | 
|  | if (a->extended_attrs) { | 
|  | unsigned int ares = le32_to_cpu(adesc->resolution); | 
|  |  | 
|  | a->resolution = SENSOR_RES(ares); | 
|  | a->exponent = S32_EXT(SENSOR_RES_EXP(ares)); | 
|  | dsize += sizeof(adesc->resolution); | 
|  |  | 
|  | scmi_parse_range_attrs(&a->attrs, &adesc->attrs); | 
|  | dsize += sizeof(adesc->attrs); | 
|  | } | 
|  | st->priv = ((u8 *)adesc + dsize); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iter_axes_extended_name_update_state(struct scmi_iterator_state *st, | 
|  | const void *response, void *priv) | 
|  | { | 
|  | u32 flags; | 
|  | const struct scmi_msg_resp_sensor_axis_names_description *r = response; | 
|  |  | 
|  | flags = le32_to_cpu(r->num_axis_flags); | 
|  | st->num_returned = NUM_AXIS_RETURNED(flags); | 
|  | st->num_remaining = NUM_AXIS_REMAINING(flags); | 
|  | st->priv = (void *)&r->desc[0]; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iter_axes_extended_name_process_response(const struct scmi_protocol_handle *ph, | 
|  | const void *response, | 
|  | struct scmi_iterator_state *st, | 
|  | void *priv) | 
|  | { | 
|  | struct scmi_sensor_axis_info *a; | 
|  | const struct scmi_apriv *apriv = priv; | 
|  | struct scmi_sensor_axis_name_descriptor *adesc = st->priv; | 
|  | u32 axis_id = le32_to_cpu(adesc->axis_id); | 
|  |  | 
|  | if (axis_id >= st->max_resources) | 
|  | return -EPROTO; | 
|  |  | 
|  | /* | 
|  | * Pick the corresponding descriptor based on the axis_id embedded | 
|  | * in the reply since the list of axes supporting extended names | 
|  | * can be a subset of all the axes. | 
|  | */ | 
|  | a = &apriv->s->axis[axis_id]; | 
|  | strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE); | 
|  | st->priv = ++adesc; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | scmi_sensor_axis_extended_names_get(const struct scmi_protocol_handle *ph, | 
|  | struct scmi_sensor_info *s) | 
|  | { | 
|  | int ret; | 
|  | void *iter; | 
|  | struct scmi_iterator_ops ops = { | 
|  | .prepare_message = iter_axes_desc_prepare_message, | 
|  | .update_state = iter_axes_extended_name_update_state, | 
|  | .process_response = iter_axes_extended_name_process_response, | 
|  | }; | 
|  | struct scmi_apriv apriv = { | 
|  | .any_axes_support_extended_names = false, | 
|  | .s = s, | 
|  | }; | 
|  |  | 
|  | iter = ph->hops->iter_response_init(ph, &ops, s->num_axis, | 
|  | SENSOR_AXIS_NAME_GET, | 
|  | sizeof(struct scmi_msg_sensor_axis_description_get), | 
|  | &apriv); | 
|  | if (IS_ERR(iter)) | 
|  | return PTR_ERR(iter); | 
|  |  | 
|  | /* | 
|  | * Do not cause whole protocol initialization failure when failing to | 
|  | * get extended names for axes. | 
|  | */ | 
|  | ret = ph->hops->iter_response_run(iter); | 
|  | if (ret) | 
|  | dev_warn(ph->dev, | 
|  | "Failed to get axes extended names for %s (ret:%d).\n", | 
|  | s->name, ret); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph, | 
|  | struct scmi_sensor_info *s, | 
|  | u32 version) | 
|  | { | 
|  | int ret; | 
|  | void *iter; | 
|  | struct scmi_iterator_ops ops = { | 
|  | .prepare_message = iter_axes_desc_prepare_message, | 
|  | .update_state = iter_axes_desc_update_state, | 
|  | .process_response = iter_axes_desc_process_response, | 
|  | }; | 
|  | struct scmi_apriv apriv = { | 
|  | .any_axes_support_extended_names = false, | 
|  | .s = s, | 
|  | }; | 
|  |  | 
|  | s->axis = devm_kcalloc(ph->dev, s->num_axis, | 
|  | sizeof(*s->axis), GFP_KERNEL); | 
|  | if (!s->axis) | 
|  | return -ENOMEM; | 
|  |  | 
|  | iter = ph->hops->iter_response_init(ph, &ops, s->num_axis, | 
|  | SENSOR_AXIS_DESCRIPTION_GET, | 
|  | sizeof(struct scmi_msg_sensor_axis_description_get), | 
|  | &apriv); | 
|  | if (IS_ERR(iter)) | 
|  | return PTR_ERR(iter); | 
|  |  | 
|  | ret = ph->hops->iter_response_run(iter); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (PROTOCOL_REV_MAJOR(version) >= 0x3 && | 
|  | apriv.any_axes_support_extended_names) | 
|  | ret = scmi_sensor_axis_extended_names_get(ph, s); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void iter_sens_descr_prepare_message(void *message, | 
|  | unsigned int desc_index, | 
|  | const void *priv) | 
|  | { | 
|  | struct scmi_msg_sensor_description *msg = message; | 
|  |  | 
|  | msg->desc_index = cpu_to_le32(desc_index); | 
|  | } | 
|  |  | 
|  | static int iter_sens_descr_update_state(struct scmi_iterator_state *st, | 
|  | const void *response, void *priv) | 
|  | { | 
|  | const struct scmi_msg_resp_sensor_description *r = response; | 
|  |  | 
|  | st->num_returned = le16_to_cpu(r->num_returned); | 
|  | st->num_remaining = le16_to_cpu(r->num_remaining); | 
|  | st->priv = (void *)&r->desc[0]; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | iter_sens_descr_process_response(const struct scmi_protocol_handle *ph, | 
|  | const void *response, | 
|  | struct scmi_iterator_state *st, void *priv) | 
|  |  | 
|  | { | 
|  | int ret = 0; | 
|  | u32 attrh, attrl; | 
|  | size_t dsize = SCMI_MSG_RESP_SENS_DESCR_BASE_SZ; | 
|  | struct scmi_sensor_info *s; | 
|  | struct sensors_info *si = priv; | 
|  | const struct scmi_sensor_descriptor *sdesc = st->priv; | 
|  |  | 
|  | s = &si->sensors[st->desc_index + st->loop_idx]; | 
|  | s->id = le32_to_cpu(sdesc->id); | 
|  |  | 
|  | attrl = le32_to_cpu(sdesc->attributes_low); | 
|  | /* common bitfields parsing */ | 
|  | s->async = SUPPORTS_ASYNC_READ(attrl); | 
|  | s->num_trip_points = NUM_TRIP_POINTS(attrl); | 
|  | /** | 
|  | * only SCMIv3.0 specific bitfield below. | 
|  | * Such bitfields are assumed to be zeroed on non | 
|  | * relevant fw versions...assuming fw not buggy ! | 
|  | */ | 
|  | if (si->notify_continuos_update_cmd) | 
|  | s->update = SUPPORTS_UPDATE_NOTIFY(attrl); | 
|  | s->timestamped = SUPPORTS_TIMESTAMP(attrl); | 
|  | if (s->timestamped) | 
|  | s->tstamp_scale = S32_EXT(SENSOR_TSTAMP_EXP(attrl)); | 
|  | s->extended_scalar_attrs = SUPPORTS_EXTEND_ATTRS(attrl); | 
|  |  | 
|  | attrh = le32_to_cpu(sdesc->attributes_high); | 
|  | /* common bitfields parsing */ | 
|  | s->scale = S32_EXT(SENSOR_SCALE(attrh)); | 
|  | s->type = SENSOR_TYPE(attrh); | 
|  | /* Use pre-allocated pool wherever possible */ | 
|  | s->intervals.desc = s->intervals.prealloc_pool; | 
|  | if (si->version == SCMIv2_SENSOR_PROTOCOL) { | 
|  | s->intervals.segmented = false; | 
|  | s->intervals.count = 1; | 
|  | /* | 
|  | * Convert SCMIv2.0 update interval format to | 
|  | * SCMIv3.0 to be used as the common exposed | 
|  | * descriptor, accessible via common macros. | 
|  | */ | 
|  | s->intervals.desc[0] = (SENSOR_UPDATE_BASE(attrh) << 5) | | 
|  | SENSOR_UPDATE_SCALE(attrh); | 
|  | } else { | 
|  | /* | 
|  | * From SCMIv3.0 update intervals are retrieved | 
|  | * via a dedicated (optional) command. | 
|  | * Since the command is optional, on error carry | 
|  | * on without any update interval. | 
|  | */ | 
|  | if (scmi_sensor_update_intervals(ph, s)) | 
|  | dev_dbg(ph->dev, | 
|  | "Update Intervals not available for sensor ID:%d\n", | 
|  | s->id); | 
|  | } | 
|  | /** | 
|  | * only > SCMIv2.0 specific bitfield below. | 
|  | * Such bitfields are assumed to be zeroed on non | 
|  | * relevant fw versions...assuming fw not buggy ! | 
|  | */ | 
|  | s->num_axis = min_t(unsigned int, | 
|  | SUPPORTS_AXIS(attrh) ? | 
|  | SENSOR_AXIS_NUMBER(attrh) : 0, | 
|  | SCMI_MAX_NUM_SENSOR_AXIS); | 
|  | strscpy(s->name, sdesc->name, SCMI_SHORT_NAME_MAX_SIZE); | 
|  |  | 
|  | /* | 
|  | * If supported overwrite short name with the extended | 
|  | * one; on error just carry on and use already provided | 
|  | * short name. | 
|  | */ | 
|  | if (PROTOCOL_REV_MAJOR(si->version) >= 0x3 && | 
|  | SUPPORTS_EXTENDED_NAMES(attrl)) | 
|  | ph->hops->extended_name_get(ph, SENSOR_NAME_GET, s->id, | 
|  | NULL, s->name, SCMI_MAX_STR_SIZE); | 
|  |  | 
|  | if (s->extended_scalar_attrs) { | 
|  | s->sensor_power = le32_to_cpu(sdesc->power); | 
|  | dsize += sizeof(sdesc->power); | 
|  |  | 
|  | /* Only for sensors reporting scalar values */ | 
|  | if (s->num_axis == 0) { | 
|  | unsigned int sres = le32_to_cpu(sdesc->resolution); | 
|  |  | 
|  | s->resolution = SENSOR_RES(sres); | 
|  | s->exponent = S32_EXT(SENSOR_RES_EXP(sres)); | 
|  | dsize += sizeof(sdesc->resolution); | 
|  |  | 
|  | scmi_parse_range_attrs(&s->scalar_attrs, | 
|  | &sdesc->scalar_attrs); | 
|  | dsize += sizeof(sdesc->scalar_attrs); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (s->num_axis > 0) | 
|  | ret = scmi_sensor_axis_description(ph, s, si->version); | 
|  |  | 
|  | st->priv = ((u8 *)sdesc + dsize); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int scmi_sensor_description_get(const struct scmi_protocol_handle *ph, | 
|  | struct sensors_info *si) | 
|  | { | 
|  | void *iter; | 
|  | struct scmi_iterator_ops ops = { | 
|  | .prepare_message = iter_sens_descr_prepare_message, | 
|  | .update_state = iter_sens_descr_update_state, | 
|  | .process_response = iter_sens_descr_process_response, | 
|  | }; | 
|  |  | 
|  | iter = ph->hops->iter_response_init(ph, &ops, si->num_sensors, | 
|  | SENSOR_DESCRIPTION_GET, | 
|  | sizeof(__le32), si); | 
|  | if (IS_ERR(iter)) | 
|  | return PTR_ERR(iter); | 
|  |  | 
|  | return ph->hops->iter_response_run(iter); | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | scmi_sensor_request_notify(const struct scmi_protocol_handle *ph, u32 sensor_id, | 
|  | u8 message_id, bool enable) | 
|  | { | 
|  | int ret; | 
|  | u32 evt_cntl = enable ? SENSOR_NOTIFY_ALL : 0; | 
|  | struct scmi_xfer *t; | 
|  | struct scmi_msg_sensor_request_notify *cfg; | 
|  |  | 
|  | ret = ph->xops->xfer_get_init(ph, message_id, sizeof(*cfg), 0, &t); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | cfg = t->tx.buf; | 
|  | cfg->id = cpu_to_le32(sensor_id); | 
|  | cfg->event_control = cpu_to_le32(evt_cntl); | 
|  |  | 
|  | ret = ph->xops->do_xfer(ph, t); | 
|  |  | 
|  | ph->xops->xfer_put(ph, t); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int scmi_sensor_trip_point_notify(const struct scmi_protocol_handle *ph, | 
|  | u32 sensor_id, bool enable) | 
|  | { | 
|  | return scmi_sensor_request_notify(ph, sensor_id, | 
|  | SENSOR_TRIP_POINT_NOTIFY, | 
|  | enable); | 
|  | } | 
|  |  | 
|  | static int | 
|  | scmi_sensor_continuous_update_notify(const struct scmi_protocol_handle *ph, | 
|  | u32 sensor_id, bool enable) | 
|  | { | 
|  | return scmi_sensor_request_notify(ph, sensor_id, | 
|  | SENSOR_CONTINUOUS_UPDATE_NOTIFY, | 
|  | enable); | 
|  | } | 
|  |  | 
|  | static int | 
|  | scmi_sensor_trip_point_config(const struct scmi_protocol_handle *ph, | 
|  | u32 sensor_id, u8 trip_id, u64 trip_value) | 
|  | { | 
|  | int ret; | 
|  | u32 evt_cntl = SENSOR_TP_BOTH; | 
|  | struct scmi_xfer *t; | 
|  | struct scmi_msg_set_sensor_trip_point *trip; | 
|  |  | 
|  | ret = ph->xops->xfer_get_init(ph, SENSOR_TRIP_POINT_CONFIG, | 
|  | sizeof(*trip), 0, &t); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | trip = t->tx.buf; | 
|  | trip->id = cpu_to_le32(sensor_id); | 
|  | trip->event_control = cpu_to_le32(evt_cntl | SENSOR_TP_ID(trip_id)); | 
|  | trip->value_low = cpu_to_le32(trip_value & 0xffffffff); | 
|  | trip->value_high = cpu_to_le32(trip_value >> 32); | 
|  |  | 
|  | ret = ph->xops->do_xfer(ph, t); | 
|  |  | 
|  | ph->xops->xfer_put(ph, t); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph, | 
|  | u32 sensor_id, u32 *sensor_config) | 
|  | { | 
|  | int ret; | 
|  | struct scmi_xfer *t; | 
|  | struct sensors_info *si = ph->get_priv(ph); | 
|  |  | 
|  | if (sensor_id >= si->num_sensors) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_GET, | 
|  | sizeof(__le32), sizeof(__le32), &t); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | put_unaligned_le32(sensor_id, t->tx.buf); | 
|  | ret = ph->xops->do_xfer(ph, t); | 
|  | if (!ret) { | 
|  | struct scmi_sensor_info *s = si->sensors + sensor_id; | 
|  |  | 
|  | *sensor_config = get_unaligned_le64(t->rx.buf); | 
|  | s->sensor_config = *sensor_config; | 
|  | } | 
|  |  | 
|  | ph->xops->xfer_put(ph, t); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph, | 
|  | u32 sensor_id, u32 sensor_config) | 
|  | { | 
|  | int ret; | 
|  | struct scmi_xfer *t; | 
|  | struct scmi_msg_sensor_config_set *msg; | 
|  | struct sensors_info *si = ph->get_priv(ph); | 
|  |  | 
|  | if (sensor_id >= si->num_sensors) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_SET, | 
|  | sizeof(*msg), 0, &t); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | msg = t->tx.buf; | 
|  | msg->id = cpu_to_le32(sensor_id); | 
|  | msg->sensor_config = cpu_to_le32(sensor_config); | 
|  |  | 
|  | ret = ph->xops->do_xfer(ph, t); | 
|  | if (!ret) { | 
|  | struct scmi_sensor_info *s = si->sensors + sensor_id; | 
|  |  | 
|  | s->sensor_config = sensor_config; | 
|  | } | 
|  |  | 
|  | ph->xops->xfer_put(ph, t); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * scmi_sensor_reading_get  - Read scalar sensor value | 
|  | * @ph: Protocol handle | 
|  | * @sensor_id: Sensor ID | 
|  | * @value: The 64bit value sensor reading | 
|  | * | 
|  | * This function returns a single 64 bit reading value representing the sensor | 
|  | * value; if the platform SCMI Protocol implementation and the sensor support | 
|  | * multiple axis and timestamped-reads, this just returns the first axis while | 
|  | * dropping the timestamp value. | 
|  | * Use instead the @scmi_sensor_reading_get_timestamped to retrieve the array of | 
|  | * timestamped multi-axis values. | 
|  | * | 
|  | * Return: 0 on Success | 
|  | */ | 
|  | static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph, | 
|  | u32 sensor_id, u64 *value) | 
|  | { | 
|  | int ret; | 
|  | struct scmi_xfer *t; | 
|  | struct scmi_msg_sensor_reading_get *sensor; | 
|  | struct scmi_sensor_info *s; | 
|  | struct sensors_info *si = ph->get_priv(ph); | 
|  |  | 
|  | if (sensor_id >= si->num_sensors) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET, | 
|  | sizeof(*sensor), 0, &t); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | sensor = t->tx.buf; | 
|  | sensor->id = cpu_to_le32(sensor_id); | 
|  | s = si->sensors + sensor_id; | 
|  | if (s->async) { | 
|  | sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); | 
|  | ret = ph->xops->do_xfer_with_response(ph, t); | 
|  | if (!ret) { | 
|  | struct scmi_resp_sensor_reading_complete *resp; | 
|  |  | 
|  | resp = t->rx.buf; | 
|  | if (le32_to_cpu(resp->id) == sensor_id) | 
|  | *value = | 
|  | get_unaligned_le64(&resp->readings_low); | 
|  | else | 
|  | ret = -EPROTO; | 
|  | } | 
|  | } else { | 
|  | sensor->flags = cpu_to_le32(0); | 
|  | ret = ph->xops->do_xfer(ph, t); | 
|  | if (!ret) | 
|  | *value = get_unaligned_le64(t->rx.buf); | 
|  | } | 
|  |  | 
|  | ph->xops->xfer_put(ph, t); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | scmi_parse_sensor_readings(struct scmi_sensor_reading *out, | 
|  | const struct scmi_sensor_reading_resp *in) | 
|  | { | 
|  | out->value = get_unaligned_le64((void *)&in->sensor_value_low); | 
|  | out->timestamp = get_unaligned_le64((void *)&in->timestamp_low); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * scmi_sensor_reading_get_timestamped  - Read multiple-axis timestamped values | 
|  | * @ph: Protocol handle | 
|  | * @sensor_id: Sensor ID | 
|  | * @count: The length of the provided @readings array | 
|  | * @readings: An array of elements each representing a timestamped per-axis | 
|  | *	      reading of type @struct scmi_sensor_reading. | 
|  | *	      Returned readings are ordered as the @axis descriptors array | 
|  | *	      included in @struct scmi_sensor_info and the max number of | 
|  | *	      returned elements is min(@count, @num_axis); ideally the provided | 
|  | *	      array should be of length @count equal to @num_axis. | 
|  | * | 
|  | * Return: 0 on Success | 
|  | */ | 
|  | static int | 
|  | scmi_sensor_reading_get_timestamped(const struct scmi_protocol_handle *ph, | 
|  | u32 sensor_id, u8 count, | 
|  | struct scmi_sensor_reading *readings) | 
|  | { | 
|  | int ret; | 
|  | struct scmi_xfer *t; | 
|  | struct scmi_msg_sensor_reading_get *sensor; | 
|  | struct scmi_sensor_info *s; | 
|  | struct sensors_info *si = ph->get_priv(ph); | 
|  |  | 
|  | if (sensor_id >= si->num_sensors) | 
|  | return -EINVAL; | 
|  |  | 
|  | s = si->sensors + sensor_id; | 
|  | if (!count || !readings || | 
|  | (!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis)) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET, | 
|  | sizeof(*sensor), 0, &t); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | sensor = t->tx.buf; | 
|  | sensor->id = cpu_to_le32(sensor_id); | 
|  | if (s->async) { | 
|  | sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); | 
|  | ret = ph->xops->do_xfer_with_response(ph, t); | 
|  | if (!ret) { | 
|  | int i; | 
|  | struct scmi_resp_sensor_reading_complete_v3 *resp; | 
|  |  | 
|  | resp = t->rx.buf; | 
|  | /* Retrieve only the number of requested axis anyway */ | 
|  | if (le32_to_cpu(resp->id) == sensor_id) | 
|  | for (i = 0; i < count; i++) | 
|  | scmi_parse_sensor_readings(&readings[i], | 
|  | &resp->readings[i]); | 
|  | else | 
|  | ret = -EPROTO; | 
|  | } | 
|  | } else { | 
|  | sensor->flags = cpu_to_le32(0); | 
|  | ret = ph->xops->do_xfer(ph, t); | 
|  | if (!ret) { | 
|  | int i; | 
|  | struct scmi_sensor_reading_resp *resp_readings; | 
|  |  | 
|  | resp_readings = t->rx.buf; | 
|  | for (i = 0; i < count; i++) | 
|  | scmi_parse_sensor_readings(&readings[i], | 
|  | &resp_readings[i]); | 
|  | } | 
|  | } | 
|  |  | 
|  | ph->xops->xfer_put(ph, t); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct scmi_sensor_info * | 
|  | scmi_sensor_info_get(const struct scmi_protocol_handle *ph, u32 sensor_id) | 
|  | { | 
|  | struct sensors_info *si = ph->get_priv(ph); | 
|  |  | 
|  | if (sensor_id >= si->num_sensors) | 
|  | return NULL; | 
|  |  | 
|  | return si->sensors + sensor_id; | 
|  | } | 
|  |  | 
|  | static int scmi_sensor_count_get(const struct scmi_protocol_handle *ph) | 
|  | { | 
|  | struct sensors_info *si = ph->get_priv(ph); | 
|  |  | 
|  | return si->num_sensors; | 
|  | } | 
|  |  | 
|  | static const struct scmi_sensor_proto_ops sensor_proto_ops = { | 
|  | .count_get = scmi_sensor_count_get, | 
|  | .info_get = scmi_sensor_info_get, | 
|  | .trip_point_config = scmi_sensor_trip_point_config, | 
|  | .reading_get = scmi_sensor_reading_get, | 
|  | .reading_get_timestamped = scmi_sensor_reading_get_timestamped, | 
|  | .config_get = scmi_sensor_config_get, | 
|  | .config_set = scmi_sensor_config_set, | 
|  | }; | 
|  |  | 
|  | static bool scmi_sensor_notify_supported(const struct scmi_protocol_handle *ph, | 
|  | u8 evt_id, u32 src_id) | 
|  | { | 
|  | bool supported = false; | 
|  | const struct scmi_sensor_info *s; | 
|  | struct sensors_info *sinfo = ph->get_priv(ph); | 
|  |  | 
|  | s = scmi_sensor_info_get(ph, src_id); | 
|  | if (!s) | 
|  | return false; | 
|  |  | 
|  | if (evt_id == SCMI_EVENT_SENSOR_TRIP_POINT_EVENT) | 
|  | supported = sinfo->notify_trip_point_cmd; | 
|  | else if (evt_id == SCMI_EVENT_SENSOR_UPDATE) | 
|  | supported = s->update; | 
|  |  | 
|  | return supported; | 
|  | } | 
|  |  | 
|  | static int scmi_sensor_set_notify_enabled(const struct scmi_protocol_handle *ph, | 
|  | u8 evt_id, u32 src_id, bool enable) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | switch (evt_id) { | 
|  | case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: | 
|  | ret = scmi_sensor_trip_point_notify(ph, src_id, enable); | 
|  | break; | 
|  | case SCMI_EVENT_SENSOR_UPDATE: | 
|  | ret = scmi_sensor_continuous_update_notify(ph, src_id, enable); | 
|  | break; | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ret) | 
|  | pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n", | 
|  | evt_id, src_id, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void * | 
|  | scmi_sensor_fill_custom_report(const struct scmi_protocol_handle *ph, | 
|  | u8 evt_id, ktime_t timestamp, | 
|  | const void *payld, size_t payld_sz, | 
|  | void *report, u32 *src_id) | 
|  | { | 
|  | void *rep = NULL; | 
|  |  | 
|  | switch (evt_id) { | 
|  | case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: | 
|  | { | 
|  | const struct scmi_sensor_trip_notify_payld *p = payld; | 
|  | struct scmi_sensor_trip_point_report *r = report; | 
|  |  | 
|  | if (sizeof(*p) != payld_sz) | 
|  | break; | 
|  |  | 
|  | r->timestamp = timestamp; | 
|  | r->agent_id = le32_to_cpu(p->agent_id); | 
|  | r->sensor_id = le32_to_cpu(p->sensor_id); | 
|  | r->trip_point_desc = le32_to_cpu(p->trip_point_desc); | 
|  | *src_id = r->sensor_id; | 
|  | rep = r; | 
|  | break; | 
|  | } | 
|  | case SCMI_EVENT_SENSOR_UPDATE: | 
|  | { | 
|  | int i; | 
|  | struct scmi_sensor_info *s; | 
|  | const struct scmi_sensor_update_notify_payld *p = payld; | 
|  | struct scmi_sensor_update_report *r = report; | 
|  | struct sensors_info *sinfo = ph->get_priv(ph); | 
|  |  | 
|  | /* payld_sz is variable for this event */ | 
|  | r->sensor_id = le32_to_cpu(p->sensor_id); | 
|  | if (r->sensor_id >= sinfo->num_sensors) | 
|  | break; | 
|  | r->timestamp = timestamp; | 
|  | r->agent_id = le32_to_cpu(p->agent_id); | 
|  | s = &sinfo->sensors[r->sensor_id]; | 
|  | /* | 
|  | * The generated report r (@struct scmi_sensor_update_report) | 
|  | * was pre-allocated to contain up to SCMI_MAX_NUM_SENSOR_AXIS | 
|  | * readings: here it is filled with the effective @num_axis | 
|  | * readings defined for this sensor or 1 for scalar sensors. | 
|  | */ | 
|  | r->readings_count = s->num_axis ?: 1; | 
|  | for (i = 0; i < r->readings_count; i++) | 
|  | scmi_parse_sensor_readings(&r->readings[i], | 
|  | &p->readings[i]); | 
|  | *src_id = r->sensor_id; | 
|  | rep = r; | 
|  | break; | 
|  | } | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return rep; | 
|  | } | 
|  |  | 
|  | static int scmi_sensor_get_num_sources(const struct scmi_protocol_handle *ph) | 
|  | { | 
|  | struct sensors_info *si = ph->get_priv(ph); | 
|  |  | 
|  | return si->num_sensors; | 
|  | } | 
|  |  | 
|  | static const struct scmi_event sensor_events[] = { | 
|  | { | 
|  | .id = SCMI_EVENT_SENSOR_TRIP_POINT_EVENT, | 
|  | .max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld), | 
|  | .max_report_sz = sizeof(struct scmi_sensor_trip_point_report), | 
|  | }, | 
|  | { | 
|  | .id = SCMI_EVENT_SENSOR_UPDATE, | 
|  | .max_payld_sz = | 
|  | sizeof(struct scmi_sensor_update_notify_payld) + | 
|  | SCMI_MAX_NUM_SENSOR_AXIS * | 
|  | sizeof(struct scmi_sensor_reading_resp), | 
|  | .max_report_sz = sizeof(struct scmi_sensor_update_report) + | 
|  | SCMI_MAX_NUM_SENSOR_AXIS * | 
|  | sizeof(struct scmi_sensor_reading), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct scmi_event_ops sensor_event_ops = { | 
|  | .is_notify_supported = scmi_sensor_notify_supported, | 
|  | .get_num_sources = scmi_sensor_get_num_sources, | 
|  | .set_notify_enabled = scmi_sensor_set_notify_enabled, | 
|  | .fill_custom_report = scmi_sensor_fill_custom_report, | 
|  | }; | 
|  |  | 
|  | static const struct scmi_protocol_events sensor_protocol_events = { | 
|  | .queue_sz = SCMI_PROTO_QUEUE_SZ, | 
|  | .ops = &sensor_event_ops, | 
|  | .evts = sensor_events, | 
|  | .num_events = ARRAY_SIZE(sensor_events), | 
|  | }; | 
|  |  | 
|  | static int scmi_sensors_protocol_init(const struct scmi_protocol_handle *ph) | 
|  | { | 
|  | u32 version; | 
|  | int ret; | 
|  | struct sensors_info *sinfo; | 
|  |  | 
|  | ret = ph->xops->version_get(ph, &version); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | dev_dbg(ph->dev, "Sensor Version %d.%d\n", | 
|  | PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version)); | 
|  |  | 
|  | sinfo = devm_kzalloc(ph->dev, sizeof(*sinfo), GFP_KERNEL); | 
|  | if (!sinfo) | 
|  | return -ENOMEM; | 
|  | sinfo->version = version; | 
|  |  | 
|  | ret = scmi_sensor_attributes_get(ph, sinfo); | 
|  | if (ret) | 
|  | return ret; | 
|  | sinfo->sensors = devm_kcalloc(ph->dev, sinfo->num_sensors, | 
|  | sizeof(*sinfo->sensors), GFP_KERNEL); | 
|  | if (!sinfo->sensors) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = scmi_sensor_description_get(ph, sinfo); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return ph->set_priv(ph, sinfo, version); | 
|  | } | 
|  |  | 
|  | static const struct scmi_protocol scmi_sensors = { | 
|  | .id = SCMI_PROTOCOL_SENSOR, | 
|  | .owner = THIS_MODULE, | 
|  | .instance_init = &scmi_sensors_protocol_init, | 
|  | .ops = &sensor_proto_ops, | 
|  | .events = &sensor_protocol_events, | 
|  | .supported_version = SCMI_PROTOCOL_SUPPORTED_VERSION, | 
|  | }; | 
|  |  | 
|  | DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(sensors, scmi_sensors) |