|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * fwnode helpers for the MDIO (Ethernet PHY) API | 
|  | * | 
|  | * This file provides helper functions for extracting PHY device information | 
|  | * out of the fwnode and using it to populate an mii_bus. | 
|  | */ | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/dev_printk.h> | 
|  | #include <linux/fwnode_mdio.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/phy.h> | 
|  | #include <linux/pse-pd/pse.h> | 
|  |  | 
|  | MODULE_AUTHOR("Calvin Johnson <calvin.johnson@oss.nxp.com>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("FWNODE MDIO bus (Ethernet PHY) accessors"); | 
|  |  | 
|  | static struct pse_control * | 
|  | fwnode_find_pse_control(struct fwnode_handle *fwnode) | 
|  | { | 
|  | struct pse_control *psec; | 
|  | struct device_node *np; | 
|  |  | 
|  | if (!IS_ENABLED(CONFIG_PSE_CONTROLLER)) | 
|  | return NULL; | 
|  |  | 
|  | np = to_of_node(fwnode); | 
|  | if (!np) | 
|  | return NULL; | 
|  |  | 
|  | psec = of_pse_control_get(np); | 
|  | if (PTR_ERR(psec) == -ENOENT) | 
|  | return NULL; | 
|  |  | 
|  | return psec; | 
|  | } | 
|  |  | 
|  | static struct mii_timestamper * | 
|  | fwnode_find_mii_timestamper(struct fwnode_handle *fwnode) | 
|  | { | 
|  | struct mii_timestamper *mii_ts; | 
|  | struct of_phandle_args arg; | 
|  | int err; | 
|  |  | 
|  | if (is_acpi_node(fwnode)) | 
|  | return NULL; | 
|  |  | 
|  | err = of_parse_phandle_with_fixed_args(to_of_node(fwnode), | 
|  | "timestamper", 1, 0, &arg); | 
|  | if (err == -ENOENT) | 
|  | return NULL; | 
|  | else if (err) | 
|  | return ERR_PTR(err); | 
|  |  | 
|  | if (arg.args_count != 1) { | 
|  | mii_ts = ERR_PTR(-EINVAL); | 
|  | goto put_node; | 
|  | } | 
|  |  | 
|  | mii_ts = register_mii_timestamper(arg.np, arg.args[0]); | 
|  |  | 
|  | put_node: | 
|  | of_node_put(arg.np); | 
|  | return mii_ts; | 
|  | } | 
|  |  | 
|  | int fwnode_mdiobus_phy_device_register(struct mii_bus *mdio, | 
|  | struct phy_device *phy, | 
|  | struct fwnode_handle *child, u32 addr) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | rc = fwnode_irq_get(child, 0); | 
|  | /* Don't wait forever if the IRQ provider doesn't become available, | 
|  | * just fall back to poll mode | 
|  | */ | 
|  | if (rc == -EPROBE_DEFER) | 
|  | rc = driver_deferred_probe_check_state(&phy->mdio.dev); | 
|  | if (rc == -EPROBE_DEFER) | 
|  | return rc; | 
|  |  | 
|  | if (rc > 0) { | 
|  | phy->irq = rc; | 
|  | mdio->irq[addr] = rc; | 
|  | } else { | 
|  | phy->irq = mdio->irq[addr]; | 
|  | } | 
|  |  | 
|  | if (fwnode_property_read_bool(child, "broken-turn-around")) | 
|  | mdio->phy_ignore_ta_mask |= 1 << addr; | 
|  |  | 
|  | fwnode_property_read_u32(child, "reset-assert-us", | 
|  | &phy->mdio.reset_assert_delay); | 
|  | fwnode_property_read_u32(child, "reset-deassert-us", | 
|  | &phy->mdio.reset_deassert_delay); | 
|  |  | 
|  | /* Associate the fwnode with the device structure so it | 
|  | * can be looked up later | 
|  | */ | 
|  | fwnode_handle_get(child); | 
|  | device_set_node(&phy->mdio.dev, child); | 
|  |  | 
|  | /* All data is now stored in the phy struct; | 
|  | * register it | 
|  | */ | 
|  | rc = phy_device_register(phy); | 
|  | if (rc) { | 
|  | device_set_node(&phy->mdio.dev, NULL); | 
|  | fwnode_handle_put(child); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | dev_dbg(&mdio->dev, "registered phy fwnode %pfw at address %i\n", | 
|  | child, addr); | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(fwnode_mdiobus_phy_device_register); | 
|  |  | 
|  | int fwnode_mdiobus_register_phy(struct mii_bus *bus, | 
|  | struct fwnode_handle *child, u32 addr) | 
|  | { | 
|  | struct mii_timestamper *mii_ts = NULL; | 
|  | struct pse_control *psec = NULL; | 
|  | struct phy_device *phy; | 
|  | bool is_c45; | 
|  | u32 phy_id; | 
|  | int rc; | 
|  |  | 
|  | psec = fwnode_find_pse_control(child); | 
|  | if (IS_ERR(psec)) | 
|  | return PTR_ERR(psec); | 
|  |  | 
|  | mii_ts = fwnode_find_mii_timestamper(child); | 
|  | if (IS_ERR(mii_ts)) { | 
|  | rc = PTR_ERR(mii_ts); | 
|  | goto clean_pse; | 
|  | } | 
|  |  | 
|  | is_c45 = fwnode_device_is_compatible(child, "ethernet-phy-ieee802.3-c45"); | 
|  | if (is_c45 || fwnode_get_phy_id(child, &phy_id)) | 
|  | phy = get_phy_device(bus, addr, is_c45); | 
|  | else | 
|  | phy = phy_device_create(bus, addr, phy_id, 0, NULL); | 
|  | if (IS_ERR(phy)) { | 
|  | rc = PTR_ERR(phy); | 
|  | goto clean_mii_ts; | 
|  | } | 
|  |  | 
|  | if (is_acpi_node(child)) { | 
|  | phy->irq = bus->irq[addr]; | 
|  |  | 
|  | /* Associate the fwnode with the device structure so it | 
|  | * can be looked up later. | 
|  | */ | 
|  | phy->mdio.dev.fwnode = fwnode_handle_get(child); | 
|  |  | 
|  | /* All data is now stored in the phy struct, so register it */ | 
|  | rc = phy_device_register(phy); | 
|  | if (rc) { | 
|  | phy->mdio.dev.fwnode = NULL; | 
|  | fwnode_handle_put(child); | 
|  | goto clean_phy; | 
|  | } | 
|  | } else if (is_of_node(child)) { | 
|  | rc = fwnode_mdiobus_phy_device_register(bus, phy, child, addr); | 
|  | if (rc) | 
|  | goto clean_phy; | 
|  | } | 
|  |  | 
|  | phy->psec = psec; | 
|  |  | 
|  | /* phy->mii_ts may already be defined by the PHY driver. A | 
|  | * mii_timestamper probed via the device tree will still have | 
|  | * precedence. | 
|  | */ | 
|  | if (mii_ts) | 
|  | phy->mii_ts = mii_ts; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | clean_phy: | 
|  | phy_device_free(phy); | 
|  | clean_mii_ts: | 
|  | unregister_mii_timestamper(mii_ts); | 
|  | clean_pse: | 
|  | pse_control_put(psec); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL(fwnode_mdiobus_register_phy); |