|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Copyright 2004 Koninklijke Philips Electronics NV | 
|  | * | 
|  | * Conversion to platform driver and DT: | 
|  | * Copyright 2014 Linaro Ltd. | 
|  | * | 
|  | * 14/04/2005 Initial version, colin.king@philips.com | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_pci.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/platform_device.h> | 
|  |  | 
|  | #include "../pci.h" | 
|  |  | 
|  | static void __iomem *versatile_pci_base; | 
|  | static void __iomem *versatile_cfg_base[2]; | 
|  |  | 
|  | #define PCI_IMAP(m)		(versatile_pci_base + ((m) * 4)) | 
|  | #define PCI_SMAP(m)		(versatile_pci_base + 0x14 + ((m) * 4)) | 
|  | #define PCI_SELFID		(versatile_pci_base + 0xc) | 
|  |  | 
|  | #define VP_PCI_DEVICE_ID		0x030010ee | 
|  | #define VP_PCI_CLASS_ID			0x0b400000 | 
|  |  | 
|  | static u32 pci_slot_ignore; | 
|  |  | 
|  | static int __init versatile_pci_slot_ignore(char *str) | 
|  | { | 
|  | int slot; | 
|  |  | 
|  | while (get_option(&str, &slot)) { | 
|  | if ((slot < 0) || (slot > 31)) | 
|  | pr_err("Illegal slot value: %d\n", slot); | 
|  | else | 
|  | pci_slot_ignore |= (1 << slot); | 
|  | } | 
|  | return 1; | 
|  | } | 
|  | __setup("pci_slot_ignore=", versatile_pci_slot_ignore); | 
|  |  | 
|  |  | 
|  | static void __iomem *versatile_map_bus(struct pci_bus *bus, | 
|  | unsigned int devfn, int offset) | 
|  | { | 
|  | unsigned int busnr = bus->number; | 
|  |  | 
|  | if (pci_slot_ignore & (1 << PCI_SLOT(devfn))) | 
|  | return NULL; | 
|  |  | 
|  | return versatile_cfg_base[1] + ((busnr << 16) | (devfn << 8) | offset); | 
|  | } | 
|  |  | 
|  | static struct pci_ops pci_versatile_ops = { | 
|  | .map_bus = versatile_map_bus, | 
|  | .read	= pci_generic_config_read32, | 
|  | .write	= pci_generic_config_write, | 
|  | }; | 
|  |  | 
|  | static int versatile_pci_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct resource *res; | 
|  | struct resource_entry *entry; | 
|  | int i, myslot = -1, mem = 1; | 
|  | u32 val; | 
|  | void __iomem *local_pci_cfg_base; | 
|  | struct pci_host_bridge *bridge; | 
|  |  | 
|  | bridge = devm_pci_alloc_host_bridge(dev, 0); | 
|  | if (!bridge) | 
|  | return -ENOMEM; | 
|  |  | 
|  | versatile_pci_base = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(versatile_pci_base)) | 
|  | return PTR_ERR(versatile_pci_base); | 
|  |  | 
|  | versatile_cfg_base[0] = devm_platform_ioremap_resource(pdev, 1); | 
|  | if (IS_ERR(versatile_cfg_base[0])) | 
|  | return PTR_ERR(versatile_cfg_base[0]); | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 2); | 
|  | versatile_cfg_base[1] = devm_pci_remap_cfg_resource(dev, res); | 
|  | if (IS_ERR(versatile_cfg_base[1])) | 
|  | return PTR_ERR(versatile_cfg_base[1]); | 
|  |  | 
|  | resource_list_for_each_entry(entry, &bridge->windows) { | 
|  | if (resource_type(entry->res) == IORESOURCE_MEM) { | 
|  | writel(entry->res->start >> 28, PCI_IMAP(mem)); | 
|  | writel(__pa(PAGE_OFFSET) >> 28, PCI_SMAP(mem)); | 
|  | mem++; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We need to discover the PCI core first to configure itself | 
|  | * before the main PCI probing is performed | 
|  | */ | 
|  | for (i = 0; i < 32; i++) { | 
|  | if ((readl(versatile_cfg_base[0] + (i << 11) + PCI_VENDOR_ID) == VP_PCI_DEVICE_ID) && | 
|  | (readl(versatile_cfg_base[0] + (i << 11) + PCI_CLASS_REVISION) == VP_PCI_CLASS_ID)) { | 
|  | myslot = i; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (myslot == -1) { | 
|  | dev_err(dev, "Cannot find PCI core!\n"); | 
|  | return -EIO; | 
|  | } | 
|  | /* | 
|  | * Do not to map Versatile FPGA PCI device into memory space | 
|  | */ | 
|  | pci_slot_ignore |= (1 << myslot); | 
|  |  | 
|  | dev_info(dev, "PCI core found (slot %d)\n", myslot); | 
|  |  | 
|  | writel(myslot, PCI_SELFID); | 
|  | local_pci_cfg_base = versatile_cfg_base[1] + (myslot << 11); | 
|  |  | 
|  | val = readl(local_pci_cfg_base + PCI_COMMAND); | 
|  | val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; | 
|  | writel(val, local_pci_cfg_base + PCI_COMMAND); | 
|  |  | 
|  | /* | 
|  | * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM | 
|  | */ | 
|  | writel(__pa(PAGE_OFFSET), local_pci_cfg_base + PCI_BASE_ADDRESS_0); | 
|  | writel(__pa(PAGE_OFFSET), local_pci_cfg_base + PCI_BASE_ADDRESS_1); | 
|  | writel(__pa(PAGE_OFFSET), local_pci_cfg_base + PCI_BASE_ADDRESS_2); | 
|  |  | 
|  | /* | 
|  | * For many years the kernel and QEMU were symbiotically buggy | 
|  | * in that they both assumed the same broken IRQ mapping. | 
|  | * QEMU therefore attempts to auto-detect old broken kernels | 
|  | * so that they still work on newer QEMU as they did on old | 
|  | * QEMU. Since we now use the correct (ie matching-hardware) | 
|  | * IRQ mapping we write a definitely different value to a | 
|  | * PCI_INTERRUPT_LINE register to tell QEMU that we expect | 
|  | * real hardware behaviour and it need not be backwards | 
|  | * compatible for us. This write is harmless on real hardware. | 
|  | */ | 
|  | writel(0, versatile_cfg_base[0] + PCI_INTERRUPT_LINE); | 
|  |  | 
|  | pci_add_flags(PCI_REASSIGN_ALL_BUS); | 
|  |  | 
|  | bridge->ops = &pci_versatile_ops; | 
|  |  | 
|  | return pci_host_probe(bridge); | 
|  | } | 
|  |  | 
|  | static const struct of_device_id versatile_pci_of_match[] = { | 
|  | { .compatible = "arm,versatile-pci", }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, versatile_pci_of_match); | 
|  |  | 
|  | static struct platform_driver versatile_pci_driver = { | 
|  | .driver = { | 
|  | .name = "versatile-pci", | 
|  | .of_match_table = versatile_pci_of_match, | 
|  | .suppress_bind_attrs = true, | 
|  | }, | 
|  | .probe = versatile_pci_probe, | 
|  | }; | 
|  | module_platform_driver(versatile_pci_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Versatile PCI driver"); |