|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | // | 
|  | // Copyright (c) 2019 Mantas Pucka <mantas@8devices.com> | 
|  | // Copyright (c) 2019 Robert Marko <robert.marko@sartura.hr> | 
|  | // | 
|  | // Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator | 
|  |  | 
|  | #include <linux/io.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/regulator/driver.h> | 
|  | #include <linux/regulator/machine.h> | 
|  | #include <linux/regulator/of_regulator.h> | 
|  |  | 
|  | static const unsigned int ipq4019_vmmc_voltages[] = { | 
|  | 1500000, 1800000, 2500000, 3000000, | 
|  | }; | 
|  |  | 
|  | static const struct regulator_ops ipq4019_regulator_voltage_ops = { | 
|  | .list_voltage = regulator_list_voltage_table, | 
|  | .map_voltage = regulator_map_voltage_ascend, | 
|  | .get_voltage_sel = regulator_get_voltage_sel_regmap, | 
|  | .set_voltage_sel = regulator_set_voltage_sel_regmap, | 
|  | }; | 
|  |  | 
|  | static const struct regulator_desc vmmc_regulator = { | 
|  | .name		= "vmmcq", | 
|  | .ops		= &ipq4019_regulator_voltage_ops, | 
|  | .type		= REGULATOR_VOLTAGE, | 
|  | .owner		= THIS_MODULE, | 
|  | .volt_table	= ipq4019_vmmc_voltages, | 
|  | .n_voltages	= ARRAY_SIZE(ipq4019_vmmc_voltages), | 
|  | .vsel_reg	= 0, | 
|  | .vsel_mask	= 0x3, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config ipq4019_vmmcq_regmap_config = { | 
|  | .reg_bits	= 32, | 
|  | .reg_stride	= 4, | 
|  | .val_bits	= 32, | 
|  | }; | 
|  |  | 
|  | static int ipq4019_regulator_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct regulator_init_data *init_data; | 
|  | struct regulator_config cfg = {}; | 
|  | struct regulator_dev *rdev; | 
|  | struct regmap *rmap; | 
|  | void __iomem *base; | 
|  |  | 
|  | init_data = of_get_regulator_init_data(dev, dev->of_node, | 
|  | &vmmc_regulator); | 
|  | if (!init_data) | 
|  | return -EINVAL; | 
|  |  | 
|  | base = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(base)) | 
|  | return PTR_ERR(base); | 
|  |  | 
|  | rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config); | 
|  | if (IS_ERR(rmap)) | 
|  | return PTR_ERR(rmap); | 
|  |  | 
|  | cfg.dev = dev; | 
|  | cfg.init_data = init_data; | 
|  | cfg.of_node = dev->of_node; | 
|  | cfg.regmap = rmap; | 
|  |  | 
|  | rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg); | 
|  | if (IS_ERR(rdev)) { | 
|  | dev_err(dev, "Failed to register regulator: %ld\n", | 
|  | PTR_ERR(rdev)); | 
|  | return PTR_ERR(rdev); | 
|  | } | 
|  | platform_set_drvdata(pdev, rdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id regulator_ipq4019_of_match[] = { | 
|  | { .compatible = "qcom,vqmmc-ipq4019-regulator", }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, regulator_ipq4019_of_match); | 
|  |  | 
|  | static struct platform_driver ipq4019_regulator_driver = { | 
|  | .probe = ipq4019_regulator_probe, | 
|  | .driver = { | 
|  | .name = "vqmmc-ipq4019-regulator", | 
|  | .probe_type = PROBE_PREFER_ASYNCHRONOUS, | 
|  | .of_match_table = of_match_ptr(regulator_ipq4019_of_match), | 
|  | }, | 
|  | }; | 
|  | module_platform_driver(ipq4019_regulator_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Mantas Pucka <mantas@8devices.com>"); | 
|  | MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator"); |