Documentation/devicetree/bindings/spi/fsl,spi.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/fsl,spi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale SPI (Serial Peripheral Interface) controller

maintainers:
  - J. Neuschäfer <j.ne@posteo.net>

properties:
  compatible:
    enum:
      - fsl,spi
      - aeroflexgaisler,spictrl

  reg:
    maxItems: 1

  cell-index:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: |
      QE SPI subblock index.
      0: QE subblock SPI1
      1: QE subblock SPI2

  mode:
    description: SPI operation mode
    enum:
      - cpu
      - cpu-qe

  interrupts:
    maxItems: 1

  clock-frequency:
    description: input clock frequency to non FSL_SOC cores

  cs-gpios: true

  fsl,spisel_boot:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      For the MPC8306 and MPC8309, specifies that the SPISEL_BOOT signal is used
      as chip select for a slave device. Use reg = <number of gpios> in the
      corresponding child node, i.e. 0 if the cs-gpios property is not present.

required:
  - compatible
  - reg
  - mode
  - interrupts

allOf:
  - $ref: spi-controller.yaml#

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

    spi@4c0 {
        compatible = "fsl,spi";
        reg = <0x4c0 0x40>;
        cell-index = <0>;
        interrupts = <82 0>;
        mode = "cpu";
        cs-gpios = <&gpio 18 IRQ_TYPE_EDGE_RISING          // device reg=<0>
                    &gpio 19 IRQ_TYPE_EDGE_RISING>;        // device reg=<1>
    };

...