| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2016 XiaoMi, Inc. |
| * Copyright (c) 2024 Svyatoslav Ryhel <clamor95@gmail.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_graph.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_connector.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_device.h> |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_probe_helper.h> |
| |
| static const struct regulator_bulk_data sharp_supplies[] = { |
| { .supply = "avdd" }, { .supply = "vddio" }, |
| { .supply = "vsp" }, { .supply = "vsn" }, |
| }; |
| |
| struct sharp_panel { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi[2]; |
| |
| struct gpio_desc *reset_gpio; |
| struct regulator_bulk_data *supplies; |
| |
| const struct drm_display_mode *mode; |
| }; |
| |
| static inline struct sharp_panel *to_sharp_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct sharp_panel, panel); |
| } |
| |
| static void sharp_panel_reset(struct sharp_panel *sharp) |
| { |
| gpiod_set_value_cansleep(sharp->reset_gpio, 1); |
| usleep_range(2000, 3000); |
| gpiod_set_value_cansleep(sharp->reset_gpio, 0); |
| usleep_range(2000, 3000); |
| } |
| |
| static int sharp_panel_prepare(struct drm_panel *panel) |
| { |
| struct sharp_panel *sharp = to_sharp_panel(panel); |
| struct device *dev = panel->dev; |
| struct mipi_dsi_device *dsi0 = sharp->dsi[0]; |
| struct mipi_dsi_device *dsi1 = sharp->dsi[1]; |
| struct mipi_dsi_multi_context dsi_ctx = { .dsi = NULL }; |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(sharp_supplies), sharp->supplies); |
| if (ret) { |
| dev_err(dev, "error enabling regulators (%d)\n", ret); |
| return ret; |
| } |
| |
| msleep(24); |
| |
| if (sharp->reset_gpio) |
| sharp_panel_reset(sharp); |
| |
| msleep(32); |
| |
| mipi_dsi_dual_dcs_write_seq_multi(&dsi_ctx, dsi0, dsi1, MIPI_DCS_EXIT_SLEEP_MODE); |
| mipi_dsi_msleep(&dsi_ctx, 120); |
| |
| mipi_dsi_dual_dcs_write_seq_multi(&dsi_ctx, dsi0, dsi1, |
| MIPI_DCS_SET_DISPLAY_BRIGHTNESS, 0xff); |
| mipi_dsi_dual_dcs_write_seq_multi(&dsi_ctx, dsi0, dsi1, |
| MIPI_DCS_WRITE_POWER_SAVE, 0x01); |
| mipi_dsi_dual_dcs_write_seq_multi(&dsi_ctx, dsi0, dsi1, |
| MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x2c); |
| |
| mipi_dsi_dual_dcs_write_seq_multi(&dsi_ctx, dsi0, dsi1, MIPI_DCS_SET_DISPLAY_ON); |
| |
| return 0; |
| } |
| |
| static int sharp_panel_unprepare(struct drm_panel *panel) |
| { |
| struct sharp_panel *sharp = to_sharp_panel(panel); |
| struct mipi_dsi_device *dsi0 = sharp->dsi[0]; |
| struct mipi_dsi_device *dsi1 = sharp->dsi[1]; |
| struct mipi_dsi_multi_context dsi_ctx = { .dsi = NULL }; |
| |
| mipi_dsi_dual_dcs_write_seq_multi(&dsi_ctx, dsi0, dsi1, MIPI_DCS_SET_DISPLAY_OFF); |
| mipi_dsi_msleep(&dsi_ctx, 100); |
| mipi_dsi_dual_dcs_write_seq_multi(&dsi_ctx, dsi0, dsi1, MIPI_DCS_ENTER_SLEEP_MODE); |
| mipi_dsi_msleep(&dsi_ctx, 150); |
| |
| if (sharp->reset_gpio) |
| gpiod_set_value_cansleep(sharp->reset_gpio, 1); |
| |
| return regulator_bulk_disable(ARRAY_SIZE(sharp_supplies), sharp->supplies); |
| } |
| |
| static const struct drm_display_mode default_mode = { |
| .clock = (1536 + 136 + 28 + 28) * (2048 + 14 + 8 + 2) * 60 / 1000, |
| .hdisplay = 1536, |
| .hsync_start = 1536 + 136, |
| .hsync_end = 1536 + 136 + 28, |
| .htotal = 1536 + 136 + 28 + 28, |
| .vdisplay = 2048, |
| .vsync_start = 2048 + 14, |
| .vsync_end = 2048 + 14 + 8, |
| .vtotal = 2048 + 14 + 8 + 2, |
| .width_mm = 120, |
| .height_mm = 160, |
| .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, |
| }; |
| |
| static int sharp_panel_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| return drm_connector_helper_get_modes_fixed(connector, &default_mode); |
| } |
| |
| static const struct drm_panel_funcs sharp_panel_funcs = { |
| .unprepare = sharp_panel_unprepare, |
| .prepare = sharp_panel_prepare, |
| .get_modes = sharp_panel_get_modes, |
| }; |
| |
| static int sharp_panel_probe(struct mipi_dsi_device *dsi) |
| { |
| const struct mipi_dsi_device_info info = { "sharp-link1", 0, NULL }; |
| struct device *dev = &dsi->dev; |
| struct device_node *dsi_r; |
| struct mipi_dsi_host *dsi_r_host; |
| struct sharp_panel *sharp; |
| int i, ret; |
| |
| sharp = devm_drm_panel_alloc(dev, struct sharp_panel, panel, |
| &sharp_panel_funcs, DRM_MODE_CONNECTOR_DSI); |
| if (IS_ERR(sharp)) |
| return PTR_ERR(sharp); |
| |
| ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(sharp_supplies), |
| sharp_supplies, &sharp->supplies); |
| if (ret) |
| return dev_err_probe(dev, ret, "failed to get supplies\n"); |
| |
| sharp->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); |
| if (IS_ERR(sharp->reset_gpio)) |
| return dev_err_probe(dev, PTR_ERR(sharp->reset_gpio), |
| "failed to get reset GPIO\n"); |
| |
| /* Panel is always connected to two DSI hosts, DSI0 is left, DSI1 is right */ |
| dsi_r = of_graph_get_remote_node(dsi->dev.of_node, 1, -1); |
| if (!dsi_r) |
| return dev_err_probe(dev, -ENODEV, "failed to find second DSI host node\n"); |
| |
| dsi_r_host = of_find_mipi_dsi_host_by_node(dsi_r); |
| of_node_put(dsi_r); |
| if (!dsi_r_host) |
| return dev_err_probe(dev, -EPROBE_DEFER, "cannot get secondary DSI host\n"); |
| |
| sharp->dsi[1] = devm_mipi_dsi_device_register_full(dev, dsi_r_host, &info); |
| if (IS_ERR(sharp->dsi[1])) |
| return dev_err_probe(dev, PTR_ERR(sharp->dsi[1]), |
| "second link registration failed\n"); |
| |
| sharp->dsi[0] = dsi; |
| mipi_dsi_set_drvdata(dsi, sharp); |
| |
| ret = drm_panel_of_backlight(&sharp->panel); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to get backlight\n"); |
| |
| drm_panel_add(&sharp->panel); |
| |
| for (i = 0; i < ARRAY_SIZE(sharp->dsi); i++) { |
| if (!sharp->dsi[i]) |
| continue; |
| |
| sharp->dsi[i]->lanes = 4; |
| sharp->dsi[i]->format = MIPI_DSI_FMT_RGB888; |
| sharp->dsi[i]->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM; |
| |
| ret = devm_mipi_dsi_attach(dev, sharp->dsi[i]); |
| if (ret < 0) { |
| drm_panel_remove(&sharp->panel); |
| return dev_err_probe(dev, ret, "failed to attach to DSI%d\n", i); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void sharp_panel_remove(struct mipi_dsi_device *dsi) |
| { |
| struct sharp_panel *sharp = mipi_dsi_get_drvdata(dsi); |
| |
| drm_panel_remove(&sharp->panel); |
| } |
| |
| static const struct of_device_id sharp_of_match[] = { |
| { .compatible = "sharp,lq079l1sx01" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sharp_of_match); |
| |
| static struct mipi_dsi_driver sharp_panel_driver = { |
| .driver = { |
| .name = "panel-sharp-lq079l1sx01", |
| .of_match_table = sharp_of_match, |
| }, |
| .probe = sharp_panel_probe, |
| .remove = sharp_panel_remove, |
| }; |
| module_mipi_dsi_driver(sharp_panel_driver); |
| |
| MODULE_AUTHOR("Svyatoslav Ryhel <clamor95@gmail.com>"); |
| MODULE_DESCRIPTION("Sharp LQ079L1SX01 panel driver"); |
| MODULE_LICENSE("GPL"); |