| // SPDX-License-Identifier: BSD-3-Clause-Clear | |
| /* Copyright (C) 2023 MediaTek Inc. */ | |
| #include <linux/etherdevice.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/thermal.h> | |
| #include <linux/firmware.h> | |
| #include "mt7925.h" | |
| #include "regd.h" | |
| #include "mac.h" | |
| #include "mcu.h" | |
| static ssize_t mt7925_thermal_temp_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| switch (to_sensor_dev_attr(attr)->index) { | |
| case 0: { | |
| struct mt792x_phy *phy = dev_get_drvdata(dev); | |
| struct mt792x_dev *mdev = phy->dev; | |
| int temperature; | |
| mt792x_mutex_acquire(mdev); | |
| temperature = mt7925_mcu_get_temperature(phy); | |
| mt792x_mutex_release(mdev); | |
| if (temperature < 0) | |
| return temperature; | |
| /* display in millidegree Celsius */ | |
| return sprintf(buf, "%u\n", temperature * 1000); | |
| } | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static SENSOR_DEVICE_ATTR_RO(temp1_input, mt7925_thermal_temp, 0); | |
| static struct attribute *mt7925_hwmon_attrs[] = { | |
| &sensor_dev_attr_temp1_input.dev_attr.attr, | |
| NULL, | |
| }; | |
| ATTRIBUTE_GROUPS(mt7925_hwmon); | |
| static int mt7925_thermal_init(struct mt792x_phy *phy) | |
| { | |
| struct wiphy *wiphy = phy->mt76->hw->wiphy; | |
| struct device *hwmon; | |
| const char *name; | |
| if (!IS_REACHABLE(CONFIG_HWMON)) | |
| return 0; | |
| name = devm_kasprintf(&wiphy->dev, GFP_KERNEL, "mt7925_%s", | |
| wiphy_name(wiphy)); | |
| if (!name) | |
| return -ENOMEM; | |
| hwmon = devm_hwmon_device_register_with_groups(&wiphy->dev, name, phy, | |
| mt7925_hwmon_groups); | |
| return PTR_ERR_OR_ZERO(hwmon); | |
| } | |
| static void mt7925_mac_init_basic_rates(struct mt792x_dev *dev) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(mt76_rates); i++) { | |
| u16 rate = mt76_rates[i].hw_value; | |
| u16 idx = MT792x_BASIC_RATES_TBL + i; | |
| rate = FIELD_PREP(MT_TX_RATE_MODE, rate >> 8) | | |
| FIELD_PREP(MT_TX_RATE_IDX, rate & GENMASK(7, 0)); | |
| mt7925_mac_set_fixed_rate_table(dev, idx, rate); | |
| } | |
| } | |
| int mt7925_mac_init(struct mt792x_dev *dev) | |
| { | |
| int i; | |
| mt76_rmw_field(dev, MT_MDP_DCR1, MT_MDP_DCR1_MAX_RX_LEN, 1536); | |
| /* enable hardware de-agg */ | |
| mt76_set(dev, MT_MDP_DCR0, MT_MDP_DCR0_DAMSDU_EN); | |
| for (i = 0; i < MT792x_WTBL_SIZE; i++) | |
| mt7925_mac_wtbl_update(dev, i, | |
| MT_WTBL_UPDATE_ADM_COUNT_CLEAR); | |
| for (i = 0; i < 2; i++) | |
| mt792x_mac_init_band(dev, i); | |
| mt7925_mac_init_basic_rates(dev); | |
| memzero_explicit(&dev->mt76.alpha2, sizeof(dev->mt76.alpha2)); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(mt7925_mac_init); | |
| static int __mt7925_init_hardware(struct mt792x_dev *dev) | |
| { | |
| int ret; | |
| ret = mt792x_mcu_init(dev); | |
| if (ret) | |
| goto out; | |
| ret = mt76_eeprom_override(&dev->mphy); | |
| if (ret) | |
| goto out; | |
| ret = mt7925_mcu_set_eeprom(dev); | |
| if (ret) | |
| goto out; | |
| ret = mt7925_mac_init(dev); | |
| if (ret) | |
| goto out; | |
| if (is_mt7927(&dev->mt76)) { | |
| ret = mt7925_mcu_set_dbdc(&dev->mphy, true); | |
| if (ret) { | |
| dev_warn(dev->mt76.dev, | |
| "MT7927 DBDC enable failed: %d\n", ret); | |
| ret = 0; | |
| } | |
| } | |
| out: | |
| return ret; | |
| } | |
| static int mt7925_init_hardware(struct mt792x_dev *dev) | |
| { | |
| int ret, i; | |
| set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state); | |
| for (i = 0; i < MT792x_MCU_INIT_RETRY_COUNT; i++) { | |
| if (atomic_read(&dev->mt76.bus_hung)) { | |
| ret = -EIO; | |
| break; | |
| } | |
| ret = __mt7925_init_hardware(dev); | |
| if (!ret) | |
| break; | |
| if (atomic_read(&dev->mt76.bus_hung)) | |
| break; | |
| mt792x_init_reset(dev); | |
| } | |
| if (i == MT792x_MCU_INIT_RETRY_COUNT) { | |
| dev_err(dev->mt76.dev, "hardware init failed\n"); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int mt7925_init_nan_cap(struct mt76_dev *mdev) | |
| { | |
| struct mt792x_dev *dev = container_of(mdev, struct mt792x_dev, mt76); | |
| const struct ieee80211_sta_he_cap *he_cap; | |
| struct ieee80211_supported_band *sband; | |
| struct wiphy *wiphy = mdev->hw->wiphy; | |
| if (!(dev->fw_features & MT792x_FW_CAP_NAN)) | |
| return 0; | |
| sband = wiphy->bands[NL80211_BAND_2GHZ]; | |
| if (sband) | |
| wiphy->nan_capa.phy.ht = sband->ht_cap; | |
| sband = wiphy->bands[NL80211_BAND_5GHZ]; | |
| if (sband) | |
| wiphy->nan_capa.phy.vht = sband->vht_cap; | |
| sband = wiphy->bands[NL80211_BAND_2GHZ]; | |
| he_cap = sband ? ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_NAN) | |
| : NULL; | |
| if (he_cap) | |
| wiphy->nan_capa.phy.he = *he_cap; | |
| return 0; | |
| } | |
| static void mt7925_init_work(struct work_struct *work) | |
| { | |
| struct mt792x_dev *dev = container_of(work, struct mt792x_dev, | |
| init_work); | |
| int ret; | |
| ret = mt7925_init_hardware(dev); | |
| if (ret) | |
| return; | |
| mt76_set_stream_caps(&dev->mphy, true); | |
| mt7925_set_stream_he_eht_caps(&dev->phy); | |
| mt792x_config_mac_addr_list(dev); | |
| ret = mt7925_init_mlo_caps(&dev->phy); | |
| if (ret) { | |
| dev_err(dev->mt76.dev, "MLO init failed\n"); | |
| return; | |
| } | |
| dev->mt76.init_wiphy = mt7925_init_nan_cap; | |
| ret = mt76_register_device(&dev->mt76, true, mt76_rates, | |
| ARRAY_SIZE(mt76_rates)); | |
| if (ret) { | |
| dev_err(dev->mt76.dev, "register device failed\n"); | |
| return; | |
| } | |
| ret = mt7925_init_debugfs(dev); | |
| if (ret) { | |
| dev_err(dev->mt76.dev, "register debugfs failed\n"); | |
| return; | |
| } | |
| ret = mt7925_thermal_init(&dev->phy); | |
| if (ret) { | |
| dev_err(dev->mt76.dev, "thermal init failed\n"); | |
| return; | |
| } | |
| ret = mt7925_mcu_set_thermal_protect(dev); | |
| if (ret) { | |
| dev_err(dev->mt76.dev, "thermal protection enable failed\n"); | |
| return; | |
| } | |
| /* we support chip reset now */ | |
| dev->hw_init_done = true; | |
| mt7925_mcu_set_deep_sleep(dev, dev->pm.ds_enable); | |
| } | |
| int mt7925_register_device(struct mt792x_dev *dev) | |
| { | |
| struct ieee80211_hw *hw = mt76_hw(dev); | |
| int ret; | |
| dev->phy.dev = dev; | |
| dev->phy.mt76 = &dev->mt76.phy; | |
| dev->mt76.phy.priv = &dev->phy; | |
| dev->mt76.tx_worker.fn = mt792x_tx_worker; | |
| INIT_DELAYED_WORK(&dev->pm.ps_work, mt792x_pm_power_save_work); | |
| INIT_DELAYED_WORK(&dev->mlo_pm_work, mt7925_mlo_pm_work); | |
| INIT_WORK(&dev->pm.wake_work, mt792x_pm_wake_work); | |
| spin_lock_init(&dev->pm.wake.lock); | |
| mutex_init(&dev->pm.mutex); | |
| init_waitqueue_head(&dev->pm.wait); | |
| init_waitqueue_head(&dev->wait); | |
| spin_lock_init(&dev->pm.txq_lock); | |
| INIT_DELAYED_WORK(&dev->mphy.mac_work, mt792x_mac_work); | |
| INIT_DELAYED_WORK(&dev->phy.scan_work, mt7925_scan_work); | |
| INIT_DELAYED_WORK(&dev->coredump.work, mt7925_coredump_work); | |
| #if IS_ENABLED(CONFIG_IPV6) | |
| INIT_WORK(&dev->ipv6_ns_work, mt7925_set_ipv6_ns_work); | |
| skb_queue_head_init(&dev->ipv6_ns_list); | |
| #endif | |
| skb_queue_head_init(&dev->phy.scan_event_list); | |
| skb_queue_head_init(&dev->coredump.msg_list); | |
| INIT_WORK(&dev->reset_work, mt7925_mac_reset_work); | |
| INIT_WORK(&dev->init_work, mt7925_init_work); | |
| INIT_WORK(&dev->phy.roc_work, mt7925_roc_work); | |
| timer_setup(&dev->phy.roc_timer, mt792x_roc_timer, 0); | |
| init_waitqueue_head(&dev->phy.roc_wait); | |
| dev->pm.idle_timeout = MT792x_PM_TIMEOUT; | |
| dev->pm.stats.last_wake_event = jiffies; | |
| dev->pm.stats.last_doze_event = jiffies; | |
| /* MT7927: runtime PM crashes BT firmware on the shared CONNINFRA domain */ | |
| if (!mt76_is_usb(&dev->mt76) && !is_mt7927(&dev->mt76)) { | |
| dev->pm.enable_user = true; | |
| dev->pm.enable = true; | |
| dev->pm.ds_enable_user = true; | |
| dev->pm.ds_enable = true; | |
| } | |
| if (!mt76_is_mmio(&dev->mt76)) | |
| hw->extra_tx_headroom += MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE; | |
| mt792x_init_acpi_sar(dev); | |
| ret = mt792x_init_wcid(dev); | |
| if (ret) | |
| return ret; | |
| ret = mt792x_init_wiphy(hw); | |
| if (ret) | |
| return ret; | |
| hw->wiphy->reg_notifier = mt7925_regd_notifier; | |
| dev->mphy.sband_2g.sband.ht_cap.cap |= | |
| IEEE80211_HT_CAP_LDPC_CODING | | |
| IEEE80211_HT_CAP_MAX_AMSDU; | |
| dev->mphy.sband_2g.sband.ht_cap.ampdu_density = | |
| IEEE80211_HT_MPDU_DENSITY_2; | |
| dev->mphy.sband_5g.sband.ht_cap.cap |= | |
| IEEE80211_HT_CAP_LDPC_CODING | | |
| IEEE80211_HT_CAP_MAX_AMSDU; | |
| dev->mphy.sband_2g.sband.ht_cap.ampdu_density = | |
| IEEE80211_HT_MPDU_DENSITY_1; | |
| dev->mphy.sband_5g.sband.vht_cap.cap |= | |
| IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 | | |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK | | |
| IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE | | |
| (3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT); | |
| dev->mphy.sband_5g.sband.vht_cap.cap |= | |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ | | |
| IEEE80211_VHT_CAP_SHORT_GI_160; | |
| dev->mphy.hw->wiphy->available_antennas_rx = dev->mphy.chainmask; | |
| dev->mphy.hw->wiphy->available_antennas_tx = dev->mphy.chainmask; | |
| queue_work(system_percpu_wq, &dev->init_work); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(mt7925_register_device); |