| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * pipe_bench - exercise concurrent pipe operation |
| * |
| * N writer threads hammer a single pipe with multi-page writes; M reader |
| * threads drain it. Each writer records its own write() latency histogram. |
| * Multi-page writes (msgsize >= PAGE_SIZE) force the loop in |
| * anon_pipe_write() to call alloc_page(GFP_HIGHUSER | __GFP_ACCOUNT) under |
| * pipe->mutex, which is the critical section the patch shrinks. |
| * |
| * By default the benchmark sweeps writers in {1, 2, 5} x readers in |
| * {1, 5, 10} and prints one block per configuration so two runs (e.g. |
| * baseline vs patched) can be diffed directly. Pass -w and -r to run a |
| * single configuration instead. Pass --memory-pressure to spawn stress-ng |
| * alongside the sweep so the per-page alloc_page() path under pipe->mutex |
| * has to dip into reclaim. |
| * |
| * Copyright (c) 2026 Meta Platforms, Inc. and affiliates |
| * Copyright (c) 2026 Breno Leitao <leitao@debian.org> |
| */ |
| |
| #define _GNU_SOURCE |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <getopt.h> |
| #include <poll.h> |
| #include <pthread.h> |
| #include <signal.h> |
| #include <stdatomic.h> |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <sys/wait.h> |
| #include <time.h> |
| #include <unistd.h> |
| |
| #define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) |
| #define HIST_BUCKETS 32 |
| |
| static size_t g_msgsize = 16 * 4096; |
| static int g_duration = 3; |
| static int g_pipe_size = 1024 * 1024; |
| static int g_memory_pressure; |
| |
| static atomic_int g_stop; |
| static int g_pipe[2]; |
| |
| struct wstats { |
| uint64_t writes; |
| uint64_t bytes; |
| uint64_t lat_sum_ns; |
| uint64_t lat_max_ns; |
| uint64_t lat_hist[HIST_BUCKETS]; |
| char *buf; |
| }; |
| |
| struct rstats { |
| char *buf; |
| }; |
| |
| struct hist_totals { |
| uint64_t writes; |
| uint64_t bytes; |
| uint64_t lat_sum; |
| uint64_t lat_max; |
| }; |
| |
| static inline uint64_t now_ns(void) |
| { |
| struct timespec ts; |
| |
| clock_gettime(CLOCK_MONOTONIC, &ts); |
| return (uint64_t)ts.tv_sec * 1000000000ull + (uint64_t)ts.tv_nsec; |
| } |
| |
| static inline int log2_bucket(uint64_t v) |
| { |
| int b = 0; |
| |
| if (!v) |
| return 0; |
| while (v >>= 1) |
| b++; |
| return b < HIST_BUCKETS ? b : HIST_BUCKETS - 1; |
| } |
| |
| static void *writer(void *arg) |
| { |
| struct wstats *s = arg; |
| |
| while (!atomic_load_explicit(&g_stop, memory_order_relaxed)) { |
| uint64_t t0 = now_ns(); |
| ssize_t n = write(g_pipe[1], s->buf, g_msgsize); |
| uint64_t dt = now_ns() - t0; |
| |
| if (n > 0) { |
| s->writes++; |
| s->bytes += (uint64_t)n; |
| s->lat_sum_ns += dt; |
| if (dt > s->lat_max_ns) |
| s->lat_max_ns = dt; |
| s->lat_hist[log2_bucket(dt)]++; |
| } else if (n < 0 && (errno == EPIPE || errno == EBADF)) { |
| break; |
| } |
| } |
| return NULL; |
| } |
| |
| static void *reader(void *arg) |
| { |
| struct rstats *s = arg; |
| |
| /* |
| * Drain until EOF (write end closed by main). g_stop is not checked |
| * here on purpose: writers may be blocked in write() with the pipe |
| * full when g_stop is set, so the reader must keep draining until |
| * main closes the write end. |
| */ |
| for (;;) { |
| ssize_t n = read(g_pipe[0], s->buf, g_msgsize); |
| |
| if (n <= 0) |
| break; |
| } |
| return NULL; |
| } |
| |
| /* Sum per-writer stats and per-bucket counts into the caller's aggregates. */ |
| static void aggregate_wstats(struct wstats *all, int nw, |
| uint64_t agg[HIST_BUCKETS], |
| struct hist_totals *t) |
| { |
| memset(t, 0, sizeof(*t)); |
| for (int i = 0; i < nw; i++) { |
| t->writes += all[i].writes; |
| t->bytes += all[i].bytes; |
| t->lat_sum += all[i].lat_sum_ns; |
| if (all[i].lat_max_ns > t->lat_max) |
| t->lat_max = all[i].lat_max_ns; |
| for (int b = 0; b < HIST_BUCKETS; b++) |
| agg[b] += all[i].lat_hist[b]; |
| } |
| } |
| |
| /* |
| * Walk @agg in order, returning the inclusive upper bound (in ns) of the |
| * log2 bucket where the running sum first reaches @target. |
| * |
| * A percentile is undefined with zero samples, and with very low sample |
| * counts integer truncation could make @target zero -- then "cum >= 0" |
| * would latch on the first (possibly empty) bucket. Callers must pass |
| * @target >= 1. |
| */ |
| static uint64_t bucket_at(const uint64_t agg[HIST_BUCKETS], uint64_t target) |
| { |
| uint64_t cum = 0; |
| |
| for (int b = 0; b < HIST_BUCKETS; b++) { |
| /* HIST_BUCKETS <= 63, so (b + 1) is always a safe shift. */ |
| uint64_t upper = (1ULL << (b + 1)) - 1; |
| |
| cum += agg[b]; |
| if (cum >= target) |
| return upper; |
| } |
| return 0; |
| } |
| |
| static void compute_p50_p99(const uint64_t agg[HIST_BUCKETS], uint64_t writes, |
| uint64_t *p50, uint64_t *p99) |
| { |
| uint64_t p50_target, p99_target; |
| |
| *p50 = *p99 = 0; |
| if (!writes) |
| return; |
| |
| p50_target = writes * 50 / 100; |
| p99_target = writes * 99 / 100; |
| if (!p50_target) |
| p50_target = 1; |
| if (!p99_target) |
| p99_target = 1; |
| |
| *p50 = bucket_at(agg, p50_target); |
| *p99 = bucket_at(agg, p99_target); |
| } |
| |
| static void print_summary(int nw, int nr, const struct hist_totals *t, |
| uint64_t p50, uint64_t p99) |
| { |
| double sec = g_duration; |
| uint64_t avg_ns = t->writes ? t->lat_sum / t->writes : 0; |
| |
| printf("config: writers=%d readers=%d msgsize=%zu duration=%d pipe_size=%d memory_pressure=%s\n", |
| nw, nr, g_msgsize, g_duration, g_pipe_size, |
| g_memory_pressure ? "yes" : "no"); |
| printf("writes: total=%llu rate=%.0f/s\n", |
| (unsigned long long)t->writes, (double)t->writes / sec); |
| printf("throughput_MBps: %.2f\n", |
| ((double)t->bytes / sec) / (1024.0 * 1024.0)); |
| printf("lat_avg_ns: %llu\n", (unsigned long long)avg_ns); |
| printf("lat_p50_ns_upper: %llu\n", (unsigned long long)p50); |
| printf("lat_p99_ns_upper: %llu\n", (unsigned long long)p99); |
| printf("lat_max_ns: %llu\n", (unsigned long long)t->lat_max); |
| } |
| |
| static void summarize(struct wstats *all, int nw, int nr) |
| { |
| uint64_t agg[HIST_BUCKETS] = {0}; |
| struct hist_totals t; |
| uint64_t p50, p99; |
| |
| aggregate_wstats(all, nw, agg, &t); |
| compute_p50_p99(agg, t.writes, &p50, &p99); |
| print_summary(nw, nr, &t, p50, p99); |
| } |
| |
| /* |
| * Child branch of fork(): restore SIGPIPE to default (parent ignores it), |
| * exec stress-ng, and on failure write the reason into @hs_wr before |
| * exiting. The parent observes EOF on hs_wr (closed via O_CLOEXEC) when |
| * exec succeeds. |
| */ |
| static void stress_ng_child(int hs_wr) __attribute__((noreturn)); |
| static void stress_ng_child(int hs_wr) |
| { |
| char errbuf[256]; |
| |
| signal(SIGPIPE, SIG_DFL); |
| execlp("stress-ng", "stress-ng", |
| "--vm", "4", "--vm-bytes", "80%", |
| "--vm-method", "all", |
| (char *)NULL); |
| snprintf(errbuf, sizeof(errbuf), |
| "exec stress-ng failed: %s\n", strerror(errno)); |
| (void)!write(hs_wr, errbuf, strlen(errbuf)); |
| _exit(127); |
| } |
| |
| /* |
| * Read from the O_CLOEXEC handshake pipe. Anything readable means the |
| * child wrote an error before exec; EOF (n == 0) means the write-end |
| * closed because exec succeeded. Returns 0 on exec success, -1 if the |
| * child failed and was reaped. |
| */ |
| static int stress_ng_wait_handshake(int hs_rd, pid_t pid) |
| { |
| struct pollfd pfd = { .fd = hs_rd, .events = POLLIN }; |
| char errbuf[256]; |
| int status; |
| int ret; |
| |
| ret = poll(&pfd, 1, 500); |
| if (ret <= 0) |
| return 0; |
| |
| ssize_t n = read(hs_rd, errbuf, sizeof(errbuf) - 1); |
| |
| if (n > 0) { |
| errbuf[n] = '\0'; |
| fputs(errbuf, stderr); |
| waitpid(pid, &status, 0); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static pid_t spawn_stress_ng(void) |
| { |
| int hs[2]; |
| pid_t pid; |
| |
| /* |
| * Handshake pipe: child writes one byte and _exit()s on exec |
| * failure. On exec success the O_CLOEXEC flag closes the write |
| * end, which the parent observes as EOF. This makes the "is |
| * stress-ng on $PATH?" check fail fast rather than silently. |
| */ |
| if (pipe2(hs, O_CLOEXEC) < 0) { |
| perror("pipe2"); |
| return -1; |
| } |
| |
| pid = fork(); |
| if (pid < 0) { |
| perror("fork"); |
| close(hs[0]); |
| close(hs[1]); |
| return -1; |
| } |
| if (pid == 0) { |
| close(hs[0]); |
| stress_ng_child(hs[1]); |
| } |
| |
| close(hs[1]); |
| if (stress_ng_wait_handshake(hs[0], pid) < 0) { |
| close(hs[0]); |
| return -1; |
| } |
| close(hs[0]); |
| |
| /* Give stress-ng a moment to map its VM regions before measuring. */ |
| sleep(1); |
| return pid; |
| } |
| |
| static void kill_stress_ng(pid_t pid) |
| { |
| int status; |
| |
| if (pid <= 0) |
| return; |
| kill(pid, SIGTERM); |
| for (int i = 0; i < 20; i++) { |
| if (waitpid(pid, &status, WNOHANG) > 0) |
| return; |
| usleep(100 * 1000); |
| } |
| kill(pid, SIGKILL); |
| waitpid(pid, &status, 0); |
| } |
| |
| /* |
| * Allocate per-thread page-aligned buffers in main so a failed |
| * aligned_alloc() aborts the run before any thread starts. Workers used |
| * to allocate their own buffer and return NULL on failure, which left |
| * peers blocked in write()/read() with nobody to unblock them. |
| */ |
| static int alloc_thread_bufs(struct wstats *ws, int nw, |
| struct rstats *rs, int nr) |
| { |
| for (int i = 0; i < nw; i++) { |
| ws[i].buf = aligned_alloc(4096, g_msgsize); |
| if (!ws[i].buf) { |
| fprintf(stderr, "writer %d: aligned_alloc(%zu) failed\n", |
| i, g_msgsize); |
| return -1; |
| } |
| memset(ws[i].buf, 0xAA, g_msgsize); |
| } |
| for (int i = 0; i < nr; i++) { |
| rs[i].buf = aligned_alloc(4096, g_msgsize); |
| if (!rs[i].buf) { |
| fprintf(stderr, "reader %d: aligned_alloc(%zu) failed\n", |
| i, g_msgsize); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| static void free_thread_bufs(struct wstats *ws, int nw, |
| struct rstats *rs, int nr) |
| { |
| if (ws) |
| for (int i = 0; i < nw; i++) |
| free(ws[i].buf); |
| if (rs) |
| for (int i = 0; i < nr; i++) |
| free(rs[i].buf); |
| } |
| |
| static int start_readers(pthread_t *rt, struct rstats *rs, int nr, |
| int *created) |
| { |
| for (int i = 0; i < nr; i++) { |
| int err = pthread_create(&rt[i], NULL, reader, &rs[i]); |
| |
| if (err) { |
| fprintf(stderr, "pthread_create reader %d: %s\n", |
| i, strerror(err)); |
| return -1; |
| } |
| (*created)++; |
| } |
| return 0; |
| } |
| |
| static int start_writers(pthread_t *wt, struct wstats *ws, int nw, |
| int *created) |
| { |
| for (int i = 0; i < nw; i++) { |
| int err = pthread_create(&wt[i], NULL, writer, &ws[i]); |
| |
| if (err) { |
| fprintf(stderr, "pthread_create writer %d: %s\n", |
| i, strerror(err)); |
| return -1; |
| } |
| (*created)++; |
| } |
| return 0; |
| } |
| |
| static int open_bench_pipe(void) |
| { |
| if (pipe(g_pipe) < 0) { |
| perror("pipe"); |
| return -1; |
| } |
| if (fcntl(g_pipe[1], F_SETPIPE_SZ, g_pipe_size) < 0) |
| perror("F_SETPIPE_SZ (continuing)"); |
| return 0; |
| } |
| |
| /* |
| * Normal termination: g_stop tells writers to leave the loop after the |
| * current write() returns. Closing the shared write-end fd means once |
| * the in-flight writes drain, readers see EOF and exit. Writers are not |
| * unblocked by EPIPE here -- g_pipe[0] stays open so readers can keep |
| * draining. |
| * |
| * Error path: some threads may have been created and others skipped, so |
| * writers could be blocked in write() with no reader making progress. |
| * Close both ends -- closing the read end is what delivers EPIPE to a |
| * blocked writer. |
| */ |
| static void stop_and_join(pthread_t *wt, int nw_created, |
| pthread_t *rt, int nr_created, int rc) |
| { |
| atomic_store(&g_stop, 1); |
| close(g_pipe[1]); |
| if (rc < 0) |
| close(g_pipe[0]); |
| for (int i = 0; i < nw_created; i++) |
| pthread_join(wt[i], NULL); |
| for (int i = 0; i < nr_created; i++) |
| pthread_join(rt[i], NULL); |
| if (rc == 0) |
| close(g_pipe[0]); |
| } |
| |
| static int run_one(int nw, int nr) |
| { |
| pthread_t *wt = NULL, *rt = NULL; |
| struct wstats *ws = NULL; |
| struct rstats *rs = NULL; |
| int nw_created = 0, nr_created = 0; |
| int rc = 0; |
| |
| atomic_store(&g_stop, 0); |
| |
| if (open_bench_pipe() < 0) |
| return -1; |
| |
| wt = calloc((size_t)nw, sizeof(*wt)); |
| rt = calloc((size_t)nr, sizeof(*rt)); |
| ws = calloc((size_t)nw, sizeof(*ws)); |
| rs = calloc((size_t)nr, sizeof(*rs)); |
| if (!wt || !rt || !ws || !rs) { |
| fprintf(stderr, "alloc failed\n"); |
| rc = -1; |
| goto teardown; |
| } |
| |
| if (alloc_thread_bufs(ws, nw, rs, nr) < 0) { |
| rc = -1; |
| goto teardown; |
| } |
| |
| if (start_readers(rt, rs, nr, &nr_created) < 0 || |
| start_writers(wt, ws, nw, &nw_created) < 0) { |
| rc = -1; |
| goto teardown; |
| } |
| |
| sleep((unsigned int)g_duration); |
| |
| teardown: |
| stop_and_join(wt, nw_created, rt, nr_created, rc); |
| |
| if (rc == 0) { |
| summarize(ws, nw, nr); |
| fflush(stdout); |
| } |
| |
| free_thread_bufs(ws, nw, rs, nr); |
| free(wt); |
| free(rt); |
| free(ws); |
| free(rs); |
| return rc; |
| } |
| |
| static void usage(const char *prog) |
| { |
| fprintf(stderr, |
| "usage: %s [-w writers] [-r readers] [-s msgsize] [-d secs] [-p pipe_size] [--memory-pressure]\n" |
| " default: sweep writers={1,2,5} x readers={1,5,10}\n" |
| " --memory-pressure: spawn stress-ng (--vm 4 --vm-bytes 80%% --vm-method all) for the run\n", |
| prog); |
| } |
| |
| static int parse_args(int argc, char **argv, |
| int *writers_override, int *readers_override) |
| { |
| static const struct option long_opts[] = { |
| {"memory-pressure", no_argument, NULL, 'M'}, |
| {0, 0, 0, 0}, |
| }; |
| int opt; |
| |
| while ((opt = getopt_long(argc, argv, "w:r:s:d:p:", |
| long_opts, NULL)) != -1) { |
| switch (opt) { |
| case 'w': |
| *writers_override = atoi(optarg); |
| break; |
| case 'r': |
| *readers_override = atoi(optarg); |
| break; |
| case 's': |
| g_msgsize = (size_t)atol(optarg); |
| break; |
| case 'd': |
| g_duration = atoi(optarg); |
| break; |
| case 'p': |
| g_pipe_size = atoi(optarg); |
| break; |
| case 'M': |
| g_memory_pressure = 1; |
| break; |
| default: |
| usage(argv[0]); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * aligned_alloc(4096, size) requires size to be a multiple of the |
| * alignment (C11); glibc returns NULL otherwise, which would make |
| * writer/reader threads silently exit and the run report zero writes. |
| * Validate up front instead. |
| */ |
| static int validate_args(void) |
| { |
| if (g_msgsize == 0 || g_msgsize % 4096 != 0) { |
| fprintf(stderr, |
| "msgsize must be a positive multiple of 4096 (got %zu)\n", |
| g_msgsize); |
| return -1; |
| } |
| if (g_duration <= 0) { |
| fprintf(stderr, "duration must be > 0 seconds (got %d)\n", |
| g_duration); |
| return -1; |
| } |
| if (g_pipe_size <= 0) { |
| fprintf(stderr, "pipe_size must be > 0 bytes (got %d)\n", |
| g_pipe_size); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int run_sweep(void) |
| { |
| static const int writers_sweep[] = {1, 2, 5}; |
| static const int readers_sweep[] = {1, 5, 10}; |
| |
| for (size_t i = 0; i < ARRAY_SIZE(writers_sweep); i++) { |
| for (size_t j = 0; j < ARRAY_SIZE(readers_sweep); j++) { |
| printf("---\n"); |
| if (run_one(writers_sweep[i], readers_sweep[j]) < 0) |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| int main(int argc, char **argv) |
| { |
| int writers_override = 0, readers_override = 0; |
| pid_t stress_pid = -1; |
| int rc = 0; |
| |
| if (parse_args(argc, argv, &writers_override, &readers_override) < 0) |
| return 1; |
| if (validate_args() < 0) |
| return 1; |
| |
| signal(SIGPIPE, SIG_IGN); |
| setvbuf(stdout, NULL, _IOLBF, 0); |
| setvbuf(stderr, NULL, _IOLBF, 0); |
| |
| fprintf(stderr, "pid=%d\n", getpid()); |
| fflush(stderr); |
| |
| if (g_memory_pressure) { |
| stress_pid = spawn_stress_ng(); |
| if (stress_pid < 0) { |
| fprintf(stderr, |
| "memory_pressure requested but stress-ng could not be spawned\n"); |
| return 1; |
| } |
| } |
| |
| if (writers_override > 0 || readers_override > 0) { |
| int nw = writers_override > 0 ? writers_override : 1; |
| int nr = readers_override > 0 ? readers_override : 1; |
| |
| rc = run_one(nw, nr) < 0 ? 1 : 0; |
| } else { |
| rc = run_sweep() < 0 ? 1 : 0; |
| } |
| |
| kill_stress_ng(stress_pid); |
| return rc; |
| } |