arch/arm64/boot/dts/freescale/imx8qm-tqma8qm-mba8x.dts

// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
 * Copyright (c) 2019-2026 TQ-Systems GmbH <linux@ew.tq-group.com>,
 * D-82229 Seefeld, Germany.
 * Author: Alexander Stein
 */

/dts-v1/;

#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/pwm/pwm.h>

#include "imx8qm-tqma8qm.dtsi"

/ {
	model = "TQ-Systems i.MX8QM TQMa8QM on MBa8x";
	compatible = "tq,imx8qm-tqma8qm-mba8x", "tq,imx8qm-tqma8qm", "fsl,imx8qm";

	adc {
		compatible = "iio-hwmon";
		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>;
	};

	aliases {
		rtc0 = &pcf85063;
		rtc1 = &rtc;
	};

	chosen {
		stdout-path = &lpuart0;
	};


	clk_xtal25: clk-xtal25 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <25000000>;
	};

	gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpiokeys>;
		autorepeat;

		switch-1 {
			label = "SWITCH_A";
			linux,code = <BTN_0>;
			gpios = <&lsio_gpio2 11 GPIO_ACTIVE_LOW>;
			wakeup-source;
		};

		switch-2 {
			label = "SWITCH_B";
			linux,code = <BTN_1>;
			gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
			wakeup-source;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpioled>;

		user-led0 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_HEARTBEAT;
			gpios = <&lsio_gpio5 20 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};

		user-led1 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_STATUS;
			gpios = <&lsio_gpio5 19 GPIO_ACTIVE_HIGH>;
			default-state = "on";
		};
	};

	fan0: pwm-fan {
		compatible = "pwm-fan";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pwmfan>;
		fan-supply = <&reg_pwm_fan>;
		#cooling-cells = <2>;
		/* typical 25 kHz -> 40.000 nsec */
		pwms = <&lsio_pwm3 0 40000 PWM_POLARITY_INVERTED>;
		cooling-levels = <0 32 64 128 196 240>;
		pulses-per-revolution = <2>;
		interrupt-parent = <&lsio_gpio2>;
		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
		status = "disabled";
	};

	reg_mba8x_12v: regulator-mba8x-12v {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_mba8x_12v>;
		regulator-name = "MBa8x-V12";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		enable-active-high;
		gpio = <&lsio_gpio1 2 GPIO_ACTIVE_HIGH>;
	};

	reg_mba8x_v3v3: regulator-mba8x-v3v3 {
		compatible = "regulator-fixed";
		regulator-name = "V_3V3_MB";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
	};

	reg_pwm_fan: regulator-pwm-fan {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_regpwmfan>;
		regulator-name = "FAN_PWR";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		gpio = <&lsio_gpio2 12 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		vin-supply = <&reg_mba8x_12v>;
	};

	reg_usb_phy: regulator-usb-phy {
		compatible = "regulator-fixed";
		regulator-max-microvolt = <3000000>;
		regulator-min-microvolt = <3000000>;
		regulator-name = "usb-phy-dummy";
	};

	reg_v1v5_pcie: regulator-v1v5-pcie {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_pcie_v1v5>;
		regulator-name = "V_1V5_MPCIE";
		regulator-min-microvolt = <1500000>;
		regulator-max-microvolt = <1500000>;
		vin-supply = <&reg_mba8x_v3v3>;
		enable-active-high;
		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
		regulator-always-on;
	};

	reg_v1v8: regulator-v1v8 {
		compatible = "regulator-fixed";
		regulator-name = "MBa8x-V1V8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
	};

	reg_v3v3_pcie: regulator-v3v3-pcie {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_pcie_v3v3>;
		regulator-name = "V_3V3_MPCIE";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&reg_mba8x_v3v3>;
		enable-active-high;
		gpio = <&lsio_gpio1 1 GPIO_ACTIVE_HIGH>;
		regulator-always-on;
	};

	reg_v3v3_sd: regulator-v3v3-sd {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_v3v3_sd>;
		regulator-name = "V3V3_SD";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&reg_mba8x_v3v3>;
		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-boot-on;
		off-on-delay-us = <200000>;
	};

	reg_vref_v1v8: regulator-vref-v1v8 {
		compatible = "regulator-fixed";
		regulator-name = "VREF_V1V8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		/*
		 * global autoconfigured region for contiguous allocations
		 * must not exceed memory size and region
		 */
		linux,cma {
			compatible = "shared-dma-pool";
			reusable;
			size = <0 0x3c000000>;
			alloc-ranges = <0 0x96000000 0 0x3c000000>;
			linux,cma-default;
		};

		decoder_boot: decoder-boot@84000000 {
			reg = <0 0x84000000 0 0x2000000>;
			no-map;
		};

		encoder1_boot: encoder1-boot@86000000 {
			reg = <0 0x86000000 0 0x200000>;
			no-map;
		};

		encoder2_boot: encoder2-boot@86200000 {
			reg = <0 0x86200000 0 0x200000>;
			no-map;
		};

		decoder_rpc: decoder-rpc@92000000 {
			reg = <0 0x92000000 0 0x100000>;
			no-map;
		};

		encoder1_rpc: encoder1-rpc@92100000 {
			reg = <0 0x92100000 0 0x700000>;
			no-map;
		};

		encoder2_rpc: encoder1-rpc@92800000 {
			reg = <0 0x92800000 0 0x700000>;
			no-map;
		};
	};

	sound {
		compatible = "fsl,imx-audio-tlv320aic32x4";
		model = "tqm-tlv320aic32";
		ssi-controller = <&sai1>;
		audio-codec = <&tlv320aic3x04>;
		audio-routing =
			"IN3_L", "Mic Jack",
			"Mic Jack", "Mic Bias",
			"IN1_L", "Line In Jack",
			"IN1_R", "Line In Jack",
			"Line Out Jack", "LOL",
			"Line Out Jack", "LOR";
	};

	sound-hdmi {
		compatible = "fsl,imx-audio-hdmi";
		model = "imx-audio-dp";
		audio-cpu = <&sai5>;
		hdmi-out;
	};

	thermal-zones {
		cpu0-thermal {
			trips {
				soc_active0_0: trip-active0 {
					temperature = <40000>;
					hysteresis = <5000>;
					type = "active";
				};

				soc_active0_1: trip-active1 {
					temperature = <48000>;
					hysteresis = <3000>;
					type = "active";
				};

				soc_active0_2: trip-active2 {
					temperature = <60000>;
					hysteresis = <10000>;
					type = "active";
				};
			};

			cooling-maps {
				map1 {
					trip = <&soc_active0_0>;
					cooling-device = <&fan0 1 1>;
				};

				map2 {
					trip = <&soc_active0_1>;
					cooling-device = <&fan0 2 2>;
				};

				map3 {
					trip = <&soc_active0_2>;
					cooling-device = <&fan0 3 3>;
				};
			};
		};
	};
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec1>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy0>;
	nvmem-cells = <&fec_mac0>;
	nvmem-cell-names = "mac-address";
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_ethphy0>;
			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
			ti,dp83867-rxctrl-strap-quirk;
			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
			reset-gpios = <&lsio_gpio2 6 GPIO_ACTIVE_LOW>;
			reset-assert-us = <500000>;
			reset-deassert-us = <50000>;
			enet-phy-lane-no-swap;
			interrupt-parent = <&lsio_gpio2>;
			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
		};
	};
};

&fec2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec2>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy3>;
	nvmem-cells = <&fec_mac1>;
	nvmem-cell-names = "mac-address";
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy3: ethernet-phy@3 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <3>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_ethphy3>;
			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
			ti,dp83867-rxctrl-strap-quirk;
			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
			reset-gpios = <&lsio_gpio2 4 GPIO_ACTIVE_LOW>;
			reset-assert-us = <500000>;
			reset-deassert-us = <50000>;
			enet-phy-lane-no-swap;
		};
	};
};

&flexcan1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	status = "okay";
};

&flexcan2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
	status = "okay";
};

&hsio_phy {
	fsl,hsio-cfg = "pciea-pcieb-sata";
	fsl,refclk-pad-mode = "input";
	status = "okay";
};

/* no refclock gating */
&hsio_refa_clk {
	compatible = "fixed-factor-clock";
	clocks = <&pcieclk 0>;
	clock-div = <1>;
	clock-mult = <1>;
	/delete-property/ enable-gpios;
};

&hsio_refb_clk {
	compatible = "fixed-factor-clock";
	clocks = <&pcieclk 0>;
	clock-div = <1>;
	clock-mult = <1>;
	/delete-property/ enable-gpios;
};

&i2c1 {
	tlv320aic3x04: audio-codec@18 {
		compatible = "ti,tlv320aic32x4";
		reg = <0x18>;
		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
		clock-names = "mclk";
		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
				<&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
				<&mclkout0_lpcg IMX_LPCG_CLK_0>;
		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
		ldoin-supply = <&reg_mba8x_v3v3>;
		iov-supply = <&reg_v1v8>;
	};

	sensor1: temperature-sensor@1c {
		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
		reg = <0x1c>;
	};

	eeprom2: eeprom@54 {
		compatible = "nxp,se97b", "atmel,24c02";
		reg = <0x54>;
		pagesize = <16>;
		vcc-supply = <&reg_mba8x_v3v3>;
	};

	pcieclk: clock-generator@68 {
		compatible = "renesas,9fgv0441";
		reg = <0x68>;
		clocks = <&clk_xtal25>;
		#clock-cells = <1>;
	};
};

&lpspi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpspi0 &pinctrl_lpspi0_cs>;
	cs-gpios = <&lsio_gpio3 5 GPIO_ACTIVE_LOW>, <&lsio_gpio3 6 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&lpspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpspi1 &pinctrl_lpspi1_cs>;
	cs-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>, <&lsio_gpio3 25 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&lpspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>;
	cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>, <&lsio_gpio3 11 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&lpuart0 {
	/* console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart0>;
	status = "okay";
};

&lpuart1 {
	/* X62 pin header */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart1>;
	status = "okay";
};

&lpuart2 {
	/* mikroBUS */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart2>;
	status = "okay";
};

&lsio_gpio2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpio2>;
	gpio-line-names = "", "", "", "",
			  "", "PCIE0_DISABLE#", "", "";

	pcie0-wdisable1-hog {
		gpio-hog;
		gpios = <5 0>;
		output-high;
		line-name = "PCIE0_DISABLE#";
	};

	pcie-clk-pd-hog {
		gpio-hog;
		gpios = <10 0>;
		output-high;
		line-name = "PCIE_CLK_PD#";
	};
};

&lsio_pwm3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lsio_pwm3>;
	status = "okay";
};

&pciea {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pciea>;
	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
	phy-names = "pcie-phy";
	reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&pcieb {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pcieb>;
	phys = <&hsio_phy 1 PHY_TYPE_PCIE 1>;
	phy-names = "pcie-phy";
	reset-gpio = <&lsio_gpio5 0 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&sai1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai1>;
	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
			  <&sai1_lpcg IMX_LPCG_CLK_0>;
	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
	status = "okay";
};

&sai5 {
	status = "okay";
};

&sai5_lpcg {
	status = "okay";
};

&sata {
	status = "okay";
};

&usbphy1 {
	phy-3p0-supply = <&reg_usb_phy>;
	status = "okay";
};

&usbotg1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1>;
	srp-disable;
	hnp-disable;
	adp-disable;
	power-active-high;
	over-current-active-low;
	dr_mode = "otg";
	status = "okay";
};

&usb3_phy {
	status = "okay";
};

&usbotg3 {
	/* over-current disabled by default */
	status = "okay";
};

&usbotg3_cdns3 {
	dr_mode = "host";
	#address-cells = <1>;
	#size-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbhub>;
	status = "okay";

	hub_2_0: hub@1 {
		compatible = "usb451,8142";
		reg = <1>;
		peer-hub = <&hub_3_0>;
		reset-gpios = <&lsio_gpio2 7 GPIO_ACTIVE_LOW>;
		vdd-supply = <&reg_mba8x_v3v3>;
	};

	hub_3_0: hub@2 {
		compatible = "usb451,8140";
		reg = <2>;
		peer-hub = <&hub_2_0>;
		reset-gpios = <&lsio_gpio2 7 GPIO_ACTIVE_LOW>;
		vdd-supply = <&reg_mba8x_v3v3>;
	};
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
	bus-width = <4>;
	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
	wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
	vmmc-supply = <&reg_v3v3_sd>;
	no-mmc;
	no-sdio;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpio>;

	pinctrl_adc0: adc0grp {
		fsl,pins = <IMX8QM_ADC_IN1_DMA_ADC0_IN1		0x02000060>,
			   <IMX8QM_ADC_IN2_DMA_ADC0_IN2		0x02000060>;
	};

	pinctrl_ethphy0: ethphy0grp {
		fsl,pins = <IMX8QM_ESAI1_SCKR_LSIO_GPIO2_IO06	0x00000041>,
			   <IMX8QM_ESAI1_TX0_LSIO_GPIO2_IO08	0x00000021>;
	};

	pinctrl_ethphy3: ethphy3grp {
		fsl,pins = <IMX8QM_ESAI1_FSR_LSIO_GPIO2_IO04	0x00000041>;
	};

	pinctrl_fec1: fec1grp {
		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD		0x000014a0>,
			   <IMX8QM_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
			   <IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
			   <IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000041>,
			   <IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC		0x00000041>,
			   <IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000041>,
			   <IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000041>,
			   <IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000041>,
			   <IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000041>,
			   <IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC		0x00000040>,
			   <IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
			   <IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
			   <IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
			   <IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
			   <IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
	};

	pinctrl_fec2: fec2grp {
		fsl,pins = <IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD		0x000014a0>,
			   <IMX8QM_ENET1_MDC_CONN_ENET1_MDC			0x06000041>,
			   <IMX8QM_ENET1_MDIO_CONN_ENET1_MDIO			0x06000041>,
			   <IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL	0x00000041>,
			   <IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC		0x00000041>,
			   <IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0	0x00000041>,
			   <IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1	0x00000041>,
			   <IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2	0x00000041>,
			   <IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3	0x00000041>,
			   <IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC		0x00000040>,
			   <IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL	0x00000040>,
			   <IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0	0x00000040>,
			   <IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1	0x00000040>,
			   <IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2	0x00000040>,
			   <IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3	0x00000040>;
	};

	pinctrl_flexcan1: flexcan0grp {
		fsl,pins = <IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX		0x00000021>,
			   <IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX		0x00000021>;
	};

	pinctrl_flexcan2: flexcan1grp {
		fsl,pins = <IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX		0x00000021>,
			   <IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX		0x00000021>;
	};

	pinctrl_gpio2: gpio2grp {
		fsl,pins = <IMX8QM_ESAI1_FST_LSIO_GPIO2_IO05		0x00000021>,
			   <IMX8QM_ESAI1_TX2_RX3_LSIO_GPIO2_IO10	0x00000021>;
	};

	pinctrl_gpio: gpiogrp {
		fsl,pins = /* GPIO0_05 on X62:26 */
			   <IMX8QM_SIM0_GPIO0_00_LSIO_GPIO0_IO05	0x00000021>,
			   /* GPIO1_14 on X64:21 */
			   <IMX8QM_LVDS1_I2C1_SCL_LSIO_GPIO1_IO14	0x00000021>,
			   /* GPIO1_15 on X64:23 */
			   <IMX8QM_LVDS1_I2C1_SDA_LSIO_GPIO1_IO15	0x00000021>,
			   /* GPIO2_17 on X63:37 */
			   <IMX8QM_SPI3_SCK_LSIO_GPIO2_IO17		0x00000021>,
			   /* GPIO2_21 on X63:39 */
			   <IMX8QM_SPI3_CS1_LSIO_GPIO2_IO21		0x00000021>,
			   /* GPIO4_12 on X61:24 */
			   <IMX8QM_USDHC2_CD_B_LSIO_GPIO4_IO12		0x00000021>,
			   /* GPIO4_11 on X61:26 */
			   <IMX8QM_USDHC2_WP_LSIO_GPIO4_IO11		0x00000021>,
			   /* GPIO4_10 on X61:28 */
			   <IMX8QM_USDHC2_VSELECT_LSIO_GPIO4_IO10	0x00000021>,
			   /* GPIO4_09 on X61:30 */
			   <IMX8QM_USDHC2_RESET_B_LSIO_GPIO4_IO09	0x00000021>,
			   /* GPIO5_23 on X62:24 */
			   <IMX8QM_USDHC1_STROBE_LSIO_GPIO5_IO23	0x00000021>,
			   /* GPIO5_24 on X61:15 */
			   <IMX8QM_USDHC2_CLK_LSIO_GPIO5_IO24		0x00000021>,
			   /* GPIO5_25 on X61:17 */
			   <IMX8QM_USDHC2_CMD_LSIO_GPIO5_IO25		0x00000021>,
			   /* GPIO5_26 on X61:19 */
			   <IMX8QM_USDHC2_DATA0_LSIO_GPIO5_IO26		0x00000021>,
			   /* GPIO5_27 on X61:21 */
			   <IMX8QM_USDHC2_DATA1_LSIO_GPIO5_IO27		0x00000021>,
			   /* GPIO5_28 on X61:23 */
			   <IMX8QM_USDHC2_DATA2_LSIO_GPIO5_IO28		0x00000021>,
			   /* GPIO5_29 on X61:25 */
			   <IMX8QM_USDHC2_DATA3_LSIO_GPIO5_IO29		0x00000021>;
	};

	pinctrl_gpiokeys: gpiokeysgrp {
		fsl,pins = <IMX8QM_ESAI1_TX3_RX2_LSIO_GPIO2_IO11	0x00000021>,
			   <IMX8QM_SCU_GPIO0_04_LSIO_GPIO1_IO00		0x00000021>;
	};

	pinctrl_gpioled: gpioledgrp {
		fsl,pins = <IMX8QM_USDHC1_DATA4_LSIO_GPIO5_IO19		0x00000021>,
			   <IMX8QM_USDHC1_DATA5_LSIO_GPIO5_IO20		0x00000021>;
	};

	pinctrl_lpspi0_cs: lpspi0csgrp {
		fsl,pins = <IMX8QM_SPI0_CS0_LSIO_GPIO3_IO05		0x00000021>,
			   <IMX8QM_SPI0_CS1_LSIO_GPIO3_IO06		0x00000021>;
	};

	pinctrl_lpspi0: lpspi0grp {
		fsl,pins = <IMX8QM_SPI0_SCK_DMA_SPI0_SCK		0x0600004d>,
			   <IMX8QM_SPI0_SDO_DMA_SPI0_SDO		0x0600004d>,
			   <IMX8QM_SPI0_SDI_DMA_SPI0_SDI		0x0600004d>;
	};

	pinctrl_lpspi1_cs: lpspi1csgrp {
		fsl,pins = <IMX8QM_ADC_IN6_LSIO_GPIO3_IO24		0x00000021>,
			   <IMX8QM_ADC_IN7_LSIO_GPIO3_IO25		0x00000021>;
	};

	pinctrl_lpspi1: lpspi1grp {
		fsl,pins = <IMX8QM_ADC_IN3_DMA_SPI1_SCK			0x0600004d>,
			   <IMX8QM_ADC_IN4_DMA_SPI1_SDO			0x0600004d>,
			   <IMX8QM_ADC_IN5_DMA_SPI1_SDI			0x0600004d>;
	};

	pinctrl_lpspi2: lpspi2grp {
		fsl,pins = <IMX8QM_SPI2_SCK_DMA_SPI2_SCK		0x0600004d>,
			   <IMX8QM_SPI2_SDO_DMA_SPI2_SDO		0x0600004d>,
			   <IMX8QM_SPI2_SDI_DMA_SPI2_SDI		0x0600004d>;
	};

	pinctrl_lpspi2_cs: lpspi2sgrp {
		fsl,pins = <IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10		0x00000021>,
			   <IMX8QM_SPI2_CS1_LSIO_GPIO3_IO11		0x00000021>;
	};

	pinctrl_lpuart0: lpuart0grp {
		fsl,pins = <IMX8QM_UART0_RX_DMA_UART0_RX		0x06000021>,
			   <IMX8QM_UART0_TX_DMA_UART0_TX		0x06000021>,
			   <IMX8QM_UART0_CTS_B_DMA_UART0_CTS_B		0x00000021>,
			   <IMX8QM_UART0_RTS_B_DMA_UART0_RTS_B		0x00000021>;
	};

	pinctrl_lpuart1: lpuart1grp {
		fsl,pins = <IMX8QM_UART1_RX_DMA_UART1_RX		0x06000021>,
			   <IMX8QM_UART1_TX_DMA_UART1_TX		0x06000021>,
			   <IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B		0x00000021>,
			   <IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B		0x00000021>;
	};

	pinctrl_lpuart2: lpuart2grp {
		fsl,pins = <IMX8QM_LVDS0_I2C1_SDA_DMA_UART2_RX		0x06000021>,
			   <IMX8QM_LVDS0_I2C1_SCL_DMA_UART2_TX		0x06000021>;
	};

	pinctrl_lsio_pwm3: lsiopwm3grp {
		fsl,pins = <IMX8QM_GPT0_COMPARE_LSIO_PWM3_OUT		0x00000021>;
	};

	pinctrl_pciea: pcieagrp {
		fsl,pins = <IMX8QM_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO29		0x06000021>,
			   <IMX8QM_PCIE_CTRL0_CLKREQ_B_HSIO_PCIE0_CLKREQ_B	0x06000021>,
			   <IMX8QM_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28		0x04000021>;
	};

	pinctrl_pcieb: pciebgrp {
		fsl,pins = <IMX8QM_PCIE_CTRL1_PERST_B_LSIO_GPIO5_IO00		0x06000021>,
			   <IMX8QM_PCIE_CTRL1_CLKREQ_B_HSIO_PCIE1_CLKREQ_B	0x06000021>,
			   <IMX8QM_PCIE_CTRL1_WAKE_B_LSIO_GPIO4_IO31		0x04000021>;
	};

	pinctrl_pwmfan: pwmfangrp {
		fsl,pins = <IMX8QM_SPI3_CS0_LSIO_GPIO2_IO20		0x30>;
	};

	pinctrl_reg_mba8x_12v: regmba12vgrp {
		fsl,pins = <IMX8QM_SCU_GPIO0_06_LSIO_GPIO1_IO02		0x00000021>;
	};

	pinctrl_reg_pcie_v1v5: regpcie1v5grp {
		fsl,pins = <IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31		0x00000021>;
	};

	pinctrl_reg_pcie_v3v3: regpcie3v3grp {
		fsl,pins = <IMX8QM_SCU_GPIO0_05_LSIO_GPIO1_IO01		0x00000021>;
	};

	pinctrl_regpwmfan: regpwmfangrp {
		fsl,pins = <IMX8QM_ESAI1_TX4_RX1_LSIO_GPIO2_IO12	0x00000021>;
	};

	pinctrl_reg_v3v3_sd: regv3v3sdgrp {
		fsl,pins = <IMX8QM_USDHC1_RESET_B_LSIO_GPIO4_IO07	0x00000021>;
	};

	pinctrl_sai1: sai1grp {
		fsl,pins = <IMX8QM_SAI1_RXD_AUD_SAI1_RXD		0x06000041>,
			   <IMX8QM_SAI1_RXC_AUD_SAI1_RXC		0x06000041>,
			   <IMX8QM_SAI1_RXFS_AUD_SAI1_RXFS		0x06000041>,
			   <IMX8QM_SAI1_TXD_AUD_SAI1_TXD		0x06000061>,
			   <IMX8QM_SAI1_TXC_AUD_SAI1_TXC		0x06000041>,
			   <IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0		0x0600004d>;
	};

	pinctrl_usbhub: usbhubgrp {
		fsl,pins = <IMX8QM_ESAI1_SCKT_LSIO_GPIO2_IO07		0x00000021>;
	};

	pinctrl_usbotg1: usbotg1grp {
		fsl,pins = <IMX8QM_USB_SS3_TC2_CONN_USB_OTG1_OC		0x00000021>,
			   <IMX8QM_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
	};

	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
	};

	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
		fsl,pins = <IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
			   <IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
			   <IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
			   <IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
			   <IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
			   <IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
			   <IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
	};

	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
		fsl,pins = <IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21		0x00000021>,
			   <IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22		0x00000021>;
	};
};