| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2026 NXP |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/pwm/pwm.h> |
| #include <dt-bindings/usb/pd.h> |
| #include "imx95.dtsi" |
| |
| #define FALLING_EDGE 1 |
| #define RISING_EDGE 2 |
| |
| #define BRD_SM_CTRL_SD3_WAKE 0x8000 /*!< PCAL6408A-0 */ |
| #define BRD_SM_CTRL_PCIE1_WAKE 0x8001 /*!< PCAL6408A-4 */ |
| #define BRD_SM_CTRL_BT_WAKE 0x8002 /*!< PCAL6408A-5 */ |
| #define BRD_SM_CTRL_PCIE2_WAKE 0x8003 /*!< PCAL6408A-6 */ |
| #define BRD_SM_CTRL_BUTTON 0x8004 /*!< PCAL6408A-7 */ |
| |
| / { |
| model = "NXP FRDM-IMX95-PRO"; |
| compatible = "fsl,imx95-19x19-frdm-pro", "fsl,imx95"; |
| |
| aliases { |
| ethernet0 = &enetc_port0; |
| ethernet1 = &enetc_port1; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| i2c0 = &lpi2c1; |
| i2c1 = &lpi2c2; |
| i2c2 = &lpi2c3; |
| i2c3 = &lpi2c4; |
| mmc0 = &usdhc1; |
| mmc1 = &usdhc2; |
| serial0 = &lpuart1; |
| serial4 = &lpuart5; |
| }; |
| |
| bt_sco_codec: bt-sco-codec { |
| compatible = "linux,bt-sco"; |
| #sound-dai-cells = <1>; |
| }; |
| |
| flexcan1_phy: can-phy0 { |
| compatible = "nxp,tja1057"; |
| #phy-cells = <0>; |
| max-bitrate = <5000000>; |
| silent-gpios = <&i2c4_gpio_expander_22 11 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| flexcan3_phy: can-phy2 { |
| compatible = "nxp,tja1057"; |
| #phy-cells = <0>; |
| max-bitrate = <5000000>; |
| silent-gpios = <&i2c4_gpio_expander_22 13 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| chosen { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| stdout-path = &lpuart1; |
| }; |
| |
| reg_vref_1v8: regulator-1p8v { |
| compatible = "regulator-fixed"; |
| regulator-name = "+V1.8_SW"; |
| regulator-max-microvolt = <1800000>; |
| regulator-min-microvolt = <1800000>; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-name = "+V3.3_SW"; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| }; |
| |
| reg_dcdc_3v3: regulator-dcdc-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "DCDC_3V3"; |
| regulator-always-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| vin-supply = <®_dcdc_5v>; |
| gpio = <&i2c4_gpio_expander_22 18 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_dcdc_5v: regulator-dcdc-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "DCDC_5V"; |
| regulator-always-on; |
| regulator-max-microvolt = <5000000>; |
| regulator-min-microvolt = <5000000>; |
| gpio = <&i2c4_gpio_expander_22 1 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_exp_1v8: regulator-exp-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "EXP_1V8"; |
| regulator-max-microvolt = <1800000>; |
| regulator-min-microvolt = <1800000>; |
| gpio = <&i2c4_gpio_expander_22 10 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_exp_3v3: regulator-exp-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "EXP_3V3"; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| vin-supply = <®_dcdc_3v3>; |
| gpio = <&i2c4_gpio_expander_22 6 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_exp_5v: regulator-exp-5v { |
| compatible = "regulator-fixed"; |
| regulator-name = "EXP_5V"; |
| regulator-always-on; |
| regulator-max-microvolt = <5000000>; |
| regulator-min-microvolt = <5000000>; |
| vin-supply = <®_dcdc_5v>; |
| gpio = <&i2c4_gpio_expander_22 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_exp_12v: regulator-exp-12v { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCCEXP_12V"; |
| regulator-always-on; |
| regulator-max-microvolt = <12000000>; |
| regulator-min-microvolt = <12000000>; |
| gpio = <&i2c4_gpio_expander_22 17 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_m2_mkey_1_pwr: regulator-m2-mkey-1-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "M.2-power-mkey-1"; |
| regulator-always-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| gpio = <&i2c3_gpio_expander_20 4 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_m2_mkey_2_pwr: regulator-m2-mkey-2-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "M.2-power-mkey-2"; |
| regulator-always-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| gpio = <&i2c3_gpio_expander_20 6 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_m2_ekey_pwr: regulator-m2-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "M.2-power-ekey"; |
| regulator-always-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| gpio = <&i2c4_gpio_expander_22 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usdhc2_vmmc: regulator-usdhc2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDD_SD2_3V3"; |
| off-on-delay-us = <12000>; |
| pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| pinctrl-names = "default"; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usdhc3_vmmc: regulator-usdhc3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "WLAN_EN"; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| vin-supply = <®_m2_ekey_pwr>; |
| gpio = <&i2c4_gpio_expander_22 8 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| /* |
| * IW612 wifi chip needs more delay than other wifi chips to complete |
| * the host interface initialization after power up, otherwise the |
| * internal state of IW612 may be unstable, resulting in the failure of |
| * the SDIO3.0 switch voltage. |
| */ |
| startup-delay-us = <20000>; |
| }; |
| |
| reg_usb_vbus: regulator-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "USB_VBUS"; |
| regulator-max-microvolt = <5000000>; |
| regulator-min-microvolt = <5000000>; |
| gpio = <&i2c4_gpio_expander_22 0 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reserved-memory { |
| ranges; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| linux_cma: linux,cma { |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0x80000000 0 0x7F000000>; |
| reusable; |
| size = <0 0x3c000000>; |
| linux,cma-default; |
| }; |
| }; |
| |
| sound-bt-sco { |
| compatible = "simple-audio-card"; |
| simple-audio-card,bitclock-inversion; |
| simple-audio-card,bitclock-master = <&btcpu>; |
| simple-audio-card,format = "dsp_a"; |
| simple-audio-card,frame-master = <&btcpu>; |
| simple-audio-card,name = "bt-sco-audio"; |
| |
| simple-audio-card,codec { |
| sound-dai = <&bt_sco_codec 1>; |
| }; |
| |
| btcpu: simple-audio-card,cpu { |
| dai-tdm-slot-num = <2>; |
| dai-tdm-slot-width = <16>; |
| sound-dai = <&sai5>; |
| }; |
| }; |
| |
| sound-micfil { |
| compatible = "fsl,imx-audio-card"; |
| model = "micfil-audio"; |
| |
| pri-dai-link { |
| format = "i2s"; |
| link-name = "micfil hifi"; |
| |
| cpu { |
| sound-dai = <&micfil>; |
| }; |
| }; |
| }; |
| |
| sound-mqs { |
| compatible = "audio-graph-card2"; |
| links = <&sai1_port1>; |
| label = "mqs-audio"; |
| }; |
| |
| usdhc3_pwrseq: usdhc3-pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| reset-gpios = <&i2c4_gpio_expander_22 9 GPIO_ACTIVE_LOW>; |
| }; |
| |
| memory@80000000 { |
| reg = <0x0 0x80000000 0 0x80000000>; |
| device_type = "memory"; |
| }; |
| }; |
| |
| &adc1 { |
| vref-supply = <®_vref_1v8>; |
| status = "okay"; |
| }; |
| |
| &enetc_port0 { |
| phy-handle = <ðphy0>; |
| phy-mode = "rgmii-id"; |
| pinctrl-0 = <&pinctrl_enetc0>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &enetc_port1 { |
| phy-handle = <ðphy1>; |
| phy-mode = "rgmii-id"; |
| pinctrl-0 = <&pinctrl_enetc1>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &flexcan1 { |
| phys = <&flexcan1_phy>; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| pinctrl-names = "default"; |
| status = "reserved"; |
| }; |
| |
| &flexcan3 { |
| phys = <&flexcan3_phy>; |
| pinctrl-0 = <&pinctrl_flexcan3>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &lpi2c3 { |
| clock-frequency = <400000>; |
| pinctrl-0 = <&pinctrl_lpi2c3>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| i2c3_gpio_expander_20: i2c3-gpio-expander@20 { |
| compatible = "nxp,pcal6416"; |
| reg = <0x20>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| interrupt-parent = <&gpio5>; |
| interrupts = <14 IRQ_TYPE_LEVEL_LOW>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| pinctrl-0 = <&pinctrl_pcal6416>; |
| pinctrl-names = "default"; |
| }; |
| |
| ptn5110: tcpc@50 { |
| compatible = "nxp,ptn5110", "tcpci"; |
| reg = <0x50>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <8 IRQ_TYPE_LEVEL_LOW>; |
| pinctrl-0 = <&pinctrl_ptn5110>; |
| pinctrl-names = "default"; |
| |
| typec_con: connector { |
| compatible = "usb-c-connector"; |
| data-role = "dual"; |
| label = "USB-C"; |
| op-sink-microwatt = <0>; |
| power-role = "dual"; |
| self-powered; |
| sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>; |
| source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; |
| try-power-role = "sink"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| typec_con_hs: endpoint { |
| remote-endpoint = <&usb3_data_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| typec_con_ss: endpoint { |
| remote-endpoint = <&usb3_data_ss>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &lpi2c4 { |
| clock-frequency = <400000>; |
| pinctrl-0 = <&pinctrl_lpi2c4>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| i2c4_gpio_expander_22: i2c4-gpio-expander@22 { |
| compatible = "nxp,pcal6524"; |
| reg = <0x22>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| gpio-line-names = "USB2 Power Enable", |
| "DCDC5V Enable", |
| "", |
| "SE Enable", |
| "", |
| "EXP 5V Enable", |
| "EXP 3V3 Enable", |
| "WIFI Power Enable", |
| "M2 DIS1 B", |
| "WIFI SD3 Reset", |
| "EXP 1V8 Enable", |
| "CAN1 Standby", |
| "M2 DIS2", |
| "CAN2 Standby", |
| "ETH 10G IO4", |
| "ETH 10G IO3", |
| "SPI3/GPIO select", |
| "EXP 12V Enable", |
| "DCDC 3V3 Enable", |
| "PCIE1 Reset", |
| "", |
| "ETH 10G CLK Enable", |
| "LVDS to HDMI converter IT6263 reset", |
| ""; |
| |
| /* When high, select lpspi; When low, select gpio. */ |
| lpspi-gpio-sel-hog { |
| gpios = <16 GPIO_ACTIVE_HIGH>; |
| gpio-hog; |
| output-high; |
| }; |
| }; |
| }; |
| |
| &lpuart1 { |
| /* console */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &lpuart5 { |
| /* BT */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5>; |
| status = "okay"; |
| |
| bluetooth { |
| compatible = "nxp,88w8987-bt"; |
| }; |
| }; |
| |
| &micfil { |
| assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2>, |
| <&scmi_clk IMX95_CLK_PDM>; |
| assigned-clock-parents = <0>, <0>, <0>, <0>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>; |
| assigned-clock-rates = <3932160000>, |
| <3612672000>, <393216000>, |
| <361267200>, <49152000>; |
| #sound-dai-cells = <0>; |
| pinctrl-0 = <&pinctrl_pdm>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &mqs1 { |
| clocks = <&scmi_clk IMX95_CLK_SAI1>; |
| clock-names = "mclk"; |
| pinctrl-0 = <&pinctrl_mqs1>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| mqs1_port: port { |
| mqs1_ep: endpoint { |
| dai-format = "left_j"; |
| remote-endpoint = <&sai1_port1_ep>; |
| }; |
| }; |
| }; |
| |
| &netc_blk_ctrl { |
| status = "okay"; |
| }; |
| |
| &netc_emdio { |
| pinctrl-0 = <&pinctrl_emdio>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| ethphy0: ethernet-phy@1 { |
| reg = <1>; |
| reset-assert-us = <10000>; |
| reset-deassert-us = <80000>; |
| reset-gpios = <&i2c3_gpio_expander_20 1 GPIO_ACTIVE_LOW>; |
| }; |
| |
| ethphy1: ethernet-phy@2 { |
| reg = <2>; |
| reset-assert-us = <10000>; |
| reset-deassert-us = <80000>; |
| reset-gpios = <&i2c3_gpio_expander_20 2 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &netc_timer { |
| status = "okay"; |
| }; |
| |
| &netcmix_blk_ctrl { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| pinctrl-0 = <&pinctrl_pcie0>; |
| pinctrl-names = "default"; |
| reset-gpio = <&i2c4_gpio_expander_22 19 GPIO_ACTIVE_LOW>; |
| vpcie-supply = <®_m2_mkey_1_pwr>; |
| status = "okay"; |
| }; |
| |
| &pcie1 { |
| pinctrl-0 = <&pinctrl_pcie1>; |
| pinctrl-names = "default"; |
| reset-gpio = <&i2c3_gpio_expander_20 9 GPIO_ACTIVE_LOW>; |
| vpcie-supply = <®_m2_mkey_2_pwr>; |
| status = "okay"; |
| }; |
| |
| &sai1 { |
| clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>, |
| <&scmi_clk IMX95_CLK_SAI1>, <&dummy>, |
| <&dummy>, <&scmi_clk IMX95_CLK_AUDIOPLL1>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2>; |
| clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k"; |
| assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2>, |
| <&scmi_clk IMX95_CLK_SAI1>; |
| assigned-clock-parents = <0>, <0>, <0>, <0>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>; |
| assigned-clock-rates = <3932160000>, |
| <3612672000>, <393216000>, |
| <361267200>, <24576000>; |
| #sound-dai-cells = <0>; |
| fsl,sai-mclk-direction-output; |
| status = "okay"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* leave unconnected - no RX in the context of MQS */ |
| port@0 { |
| reg = <0>; |
| |
| endpoint { |
| }; |
| }; |
| |
| sai1_port1: port@1 { |
| reg = <1>; |
| mclk-fs = <512>; |
| |
| sai1_port1_ep: endpoint { |
| dai-format = "left_j"; |
| system-clock-direction-out; |
| bitclock-master; |
| frame-master; |
| remote-endpoint = <&mqs1_ep>; |
| }; |
| }; |
| }; |
| }; |
| |
| &sai5 { |
| assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2>, |
| <&scmi_clk IMX95_CLK_SAI5>; |
| assigned-clock-parents = <0>, <0>, <0>, <0>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>; |
| assigned-clock-rates = <3932160000>, |
| <3612672000>, <393216000>, |
| <361267200>, <12288000>; |
| #sound-dai-cells = <0>; |
| pinctrl-0 = <&pinctrl_sai5>; |
| pinctrl-names = "default"; |
| fsl,sai-mclk-direction-output; |
| status = "okay"; |
| }; |
| |
| &scmi_iomuxc { |
| pinctrl-0 = <&pinctrl_hog>; |
| pinctrl-names = "default"; |
| |
| pinctrl_emdio: emdiogrp { |
| fsl,pins = < |
| IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC 0x50e |
| IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO 0x90e |
| >; |
| }; |
| |
| pinctrl_enetc0: enetc0grp { |
| fsl,pins = < |
| IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x50e |
| IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x50e |
| IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x50e |
| IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x50e |
| IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e |
| IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e |
| IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e |
| IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e |
| IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e |
| IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e |
| IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e |
| IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e |
| >; |
| }; |
| |
| pinctrl_enetc1: enetc1grp { |
| fsl,pins = < |
| IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x50e |
| IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x50e |
| IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x50e |
| IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x50e |
| IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x57e |
| IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x58e |
| IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x57e |
| IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x58e |
| IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x57e |
| IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x57e |
| IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x57e |
| IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x57e |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| IMX95_PAD_SAI1_TXD0__AONMIX_TOP_CAN1_TX 0x39e |
| IMX95_PAD_SAI1_TXC__AONMIX_TOP_CAN1_RX 0x39e |
| >; |
| }; |
| |
| pinctrl_flexcan3: flexcan3grp { |
| fsl,pins = < |
| IMX95_PAD_CCM_CLKO3__CAN3_TX 0x39e |
| IMX95_PAD_CCM_CLKO4__CAN3_RX 0x39e |
| >; |
| }; |
| |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x31e |
| >; |
| }; |
| |
| pinctrl_lpi2c3: lpi2c3grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e |
| IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e |
| >; |
| }; |
| |
| pinctrl_lpi2c4: lpi2c4grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e |
| IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e |
| >; |
| }; |
| |
| pinctrl_mqs1: mqs1grp { |
| fsl,pins = < |
| IMX95_PAD_SAI1_TXFS__AONMIX_TOP_MQS1_LEFT 0x31e |
| IMX95_PAD_SAI1_RXD0__AONMIX_TOP_MQS1_RIGHT 0x31e |
| >; |
| }; |
| |
| pinctrl_pcal6416: pcal6416grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x31e |
| >; |
| }; |
| |
| pinctrl_pcie0: pcie0grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x4000031e |
| >; |
| }; |
| |
| pinctrl_pcie1: pcie1grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x4000031e |
| >; |
| }; |
| |
| pinctrl_pdm: pdmgrp { |
| fsl,pins = < |
| IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x31e |
| IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x31e |
| >; |
| }; |
| |
| pinctrl_ptn5110: ptn5110grp { |
| fsl,pins = < |
| IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8 0x31e |
| >; |
| }; |
| |
| pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { |
| fsl,pins = < |
| IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e |
| >; |
| }; |
| |
| pinctrl_sai5: sai5grp { |
| fsl,pins = < |
| IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0 0x31e |
| IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK 0x31e |
| IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC 0x31e |
| IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0 0x31e |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e |
| IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e |
| >; |
| }; |
| |
| pinctrl_uart5: uart5grp { |
| fsl,pins = < |
| IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e |
| IMX95_PAD_DAP_TDI__LPUART5_RX 0x31e |
| IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e |
| IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e |
| IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e |
| IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e |
| IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e |
| IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e |
| IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e |
| IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e |
| IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e |
| IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e |
| IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e |
| IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e |
| IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e |
| IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e |
| IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e |
| IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e |
| IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e |
| IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e |
| IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e |
| IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e |
| IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e |
| IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe |
| IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe |
| IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe |
| IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe |
| IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe |
| IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe |
| IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe |
| IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe |
| IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe |
| IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe |
| IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe |
| >; |
| }; |
| |
| pinctrl_usdhc2_gpio: usdhc2gpiogrp { |
| fsl,pins = < |
| IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e |
| IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e |
| IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e |
| IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e |
| IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e |
| IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e |
| IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e |
| IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e |
| IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e |
| IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e |
| IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e |
| IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e |
| IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e |
| IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e |
| IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e |
| IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e |
| IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e |
| IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e |
| IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e |
| IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e |
| IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e |
| IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e |
| IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e |
| IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e |
| IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e |
| IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e |
| IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e |
| IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e |
| IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD3_CLK__USDHC3_CLK 0x15fe |
| IMX95_PAD_SD3_CMD__USDHC3_CMD 0x13fe |
| IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe |
| IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe |
| IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe |
| IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe |
| >; |
| }; |
| }; |
| |
| &scmi_misc { |
| nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE FALLING_EDGE |
| BRD_SM_CTRL_PCIE1_WAKE FALLING_EDGE |
| BRD_SM_CTRL_BT_WAKE FALLING_EDGE |
| BRD_SM_CTRL_PCIE2_WAKE FALLING_EDGE |
| BRD_SM_CTRL_BUTTON FALLING_EDGE>; |
| }; |
| |
| &thermal_zones { |
| pf09-thermal { |
| polling-delay = <2000>; |
| polling-delay-passive = <250>; |
| thermal-sensors = <&scmi_sensor 2>; |
| |
| trips { |
| pf09_alert: trip0 { |
| hysteresis = <2000>; |
| temperature = <140000>; |
| type = "passive"; |
| }; |
| |
| pf09_crit: trip1 { |
| hysteresis = <2000>; |
| temperature = <155000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| pf53arm-thermal { |
| polling-delay = <2000>; |
| polling-delay-passive = <250>; |
| thermal-sensors = <&scmi_sensor 4>; |
| |
| cooling-maps { |
| map0 { |
| cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, |
| <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| trip = <&pf5301_alert>; |
| }; |
| }; |
| |
| trips { |
| pf5301_alert: trip0 { |
| hysteresis = <2000>; |
| temperature = <140000>; |
| type = "passive"; |
| }; |
| |
| pf5301_crit: trip1 { |
| hysteresis = <2000>; |
| temperature = <155000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| pf53soc-thermal { |
| polling-delay = <2000>; |
| polling-delay-passive = <250>; |
| thermal-sensors = <&scmi_sensor 3>; |
| |
| trips { |
| pf5302_alert: trip0 { |
| hysteresis = <2000>; |
| temperature = <140000>; |
| type = "passive"; |
| }; |
| |
| pf5302_crit: trip1 { |
| hysteresis = <2000>; |
| temperature = <155000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| |
| &usb2 { |
| disable-over-current; |
| dr_mode = "host"; |
| vbus-supply = <®_usb_vbus>; |
| status = "okay"; |
| }; |
| |
| &usb3 { |
| status = "okay"; |
| }; |
| |
| &usb3_dwc3 { |
| adp-disable; |
| dr_mode = "otg"; |
| hnp-disable; |
| role-switch-default-mode = "peripheral"; |
| srp-disable; |
| usb-role-switch; |
| snps,dis-u1-entry-quirk; |
| snps,dis-u2-entry-quirk; |
| status = "okay"; |
| |
| port { |
| usb3_data_hs: endpoint { |
| remote-endpoint = <&typec_con_hs>; |
| }; |
| }; |
| }; |
| |
| &usb3_phy { |
| orientation-switch; |
| fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>; |
| fsl,phy-pcs-tx-swing-full-percent = <100>; |
| fsl,phy-tx-preemp-amp-tune-microamp = <600>; |
| fsl,phy-tx-vboost-level-microvolt = <1156>; |
| fsl,phy-tx-vref-tune-percent = <100>; |
| status = "okay"; |
| |
| port { |
| usb3_data_ss: endpoint { |
| remote-endpoint = <&typec_con_ss>; |
| }; |
| }; |
| }; |
| |
| &usdhc1 { |
| bus-width = <8>; |
| non-removable; |
| no-sd; |
| no-sdio; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| pinctrl-3 = <&pinctrl_usdhc1>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| bus-width = <4>; |
| cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| bus-width = <4>; |
| keep-power-in-suspend; |
| mmc-pwrseq = <&usdhc3_pwrseq>; |
| non-removable; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| pinctrl-3 = <&pinctrl_usdhc3>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| vmmc-supply = <®_usdhc3_vmmc>; |
| wakeup-source; |
| status = "okay"; |
| }; |
| |
| &wdog3 { |
| status = "okay"; |
| }; |
