| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. |
| */ |
| |
| /dts-v1/; |
| |
| #include "glymur.dtsi" |
| #include "glymur-crd.dtsi" |
| |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. Glymur CRD"; |
| compatible = "qcom,glymur-crd", "qcom,glymur"; |
| |
| pmic-glink { |
| compatible = "qcom,glymur-pmic-glink", |
| "qcom,pmic-glink"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| connector@0 { |
| compatible = "usb-c-connector"; |
| reg = <0>; |
| power-role = "dual"; |
| data-role = "dual"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| pmic_glink_hs_in: endpoint { |
| remote-endpoint = <&usb_0_dwc3_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| pmic_glink_ss_in: endpoint { |
| remote-endpoint = <&usb_0_qmpphy_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| connector@1 { |
| compatible = "usb-c-connector"; |
| reg = <1>; |
| power-role = "dual"; |
| data-role = "dual"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| pmic_glink_hs_in1: endpoint { |
| remote-endpoint = <&usb_1_dwc3_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| pmic_glink_ss_in1: endpoint { |
| remote-endpoint = <&usb_1_qmpphy_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| vreg_edp_3p3: regulator-edp-3p3 { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "VREG_EDP_3P3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-0 = <&edp_reg_en>; |
| pinctrl-names = "default"; |
| |
| regulator-boot-on; |
| }; |
| |
| vreg_misc_3p3: regulator-misc-3p3 { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "VREG_MISC_3P3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| |
| gpio = <&pmh0110_f_e0_gpios 6 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-0 = <&misc_3p3_reg_en>; |
| pinctrl-names = "default"; |
| |
| regulator-boot-on; |
| }; |
| }; |
| |
| &i2c0 { |
| clock-frequency = <400000>; |
| |
| status = "okay"; |
| |
| touchpad@2c { |
| compatible = "hid-over-i2c"; |
| reg = <0x2c>; |
| |
| hid-descr-addr = <0x20>; |
| interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>; |
| |
| vdd-supply = <&vreg_misc_3p3>; |
| vddl-supply = <&vreg_l15b_e0_1p8>; |
| |
| pinctrl-0 = <&tpad_default>; |
| pinctrl-names = "default"; |
| |
| wakeup-source; |
| }; |
| |
| keyboard@3a { |
| compatible = "hid-over-i2c"; |
| reg = <0x3a>; |
| |
| hid-descr-addr = <0x1>; |
| interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>; |
| |
| vdd-supply = <&vreg_misc_3p3>; |
| vddl-supply = <&vreg_l15b_e0_1p8>; |
| |
| pinctrl-0 = <&kybd_default>; |
| pinctrl-names = "default"; |
| |
| wakeup-source; |
| }; |
| }; |
| |
| &i2c8 { |
| clock-frequency = <400000>; |
| |
| status = "okay"; |
| |
| touchscreen@38 { |
| compatible = "hid-over-i2c"; |
| reg = <0x38>; |
| |
| hid-descr-addr = <0x1>; |
| interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>; |
| |
| vdd-supply = <&vreg_misc_3p3>; |
| vddl-supply = <&vreg_l15b_e0_1p8>; |
| |
| pinctrl-0 = <&ts0_default>; |
| pinctrl-names = "default"; |
| }; |
| }; |
| |
| &i2c5 { |
| clock-frequency = <400000>; |
| |
| status = "okay"; |
| |
| ptn3222_0: redriver@43 { |
| compatible = "nxp,ptn3222"; |
| reg = <0x43>; |
| |
| reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; |
| |
| vdd3v3-supply = <&vreg_l8b_e0_1p50>; |
| vdd1v8-supply = <&vreg_l15b_e0_1p8>; |
| |
| #phy-cells = <0>; |
| }; |
| |
| ptn3222_1: redriver@47 { |
| compatible = "nxp,ptn3222"; |
| reg = <0x47>; |
| |
| reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; |
| |
| vdd3v3-supply = <&vreg_l8b_e0_1p50>; |
| vdd1v8-supply = <&vreg_l15b_e0_1p8>; |
| |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| &mdss { |
| status = "okay"; |
| }; |
| |
| &mdss_dp0 { |
| status = "okay"; |
| }; |
| |
| &mdss_dp0_out { |
| link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; |
| }; |
| |
| &mdss_dp1 { |
| status = "okay"; |
| }; |
| |
| &mdss_dp1_out { |
| link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; |
| }; |
| |
| &mdss_dp3 { |
| /delete-property/ #sound-dai-cells; |
| |
| status = "okay"; |
| |
| aux-bus { |
| panel { |
| compatible = "samsung,atna60cl08", "samsung,atna33xc20"; |
| enable-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; |
| power-supply = <&vreg_edp_3p3>; |
| |
| pinctrl-0 = <&edp_bl_en>; |
| pinctrl-names = "default"; |
| |
| port { |
| edp_panel_in: endpoint { |
| remote-endpoint = <&mdss_dp3_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &mdss_dp3_out { |
| data-lanes = <0 1 2 3>; |
| link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; |
| |
| remote-endpoint = <&edp_panel_in>; |
| }; |
| |
| &mdss_dp3_phy { |
| vdda-phy-supply = <&vreg_l2f_e1_0p83>; |
| vdda-pll-supply = <&vreg_l4f_e1_1p08>; |
| |
| status = "okay"; |
| }; |
| |
| &pmh0110_f_e0_gpios { |
| misc_3p3_reg_en: misc-3p3-reg-en-state { |
| pins = "gpio6"; |
| function = "normal"; |
| bias-disable; |
| input-disable; |
| output-enable; |
| drive-push-pull; |
| power-source = <1>; /* 1.8 V */ |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| }; |
| }; |
| |
| &smb2370_j_e2_eusb2_repeater { |
| vdd18-supply = <&vreg_l15b_e0_1p8>; |
| vdd3-supply = <&vreg_l7b_e0_2p79>; |
| }; |
| |
| &smb2370_k_e2_eusb2_repeater { |
| vdd18-supply = <&vreg_l15b_e0_1p8>; |
| vdd3-supply = <&vreg_l7b_e0_2p79>; |
| }; |
| |
| &tlmm { |
| edp_bl_en: edp-bl-en-state { |
| pins = "gpio18"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| edp_reg_en: edp-reg-en-state { |
| pins = "gpio70"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| kybd_default: kybd-default-state { |
| pins = "gpio67"; |
| function = "gpio"; |
| bias-disable; |
| }; |
| |
| tpad_default: tpad-default-state { |
| pins = "gpio3"; |
| function = "gpio"; |
| bias-disable; |
| }; |
| |
| ts0_default: ts0-default-state { |
| int-n-pins { |
| pins = "gpio51"; |
| function = "gpio"; |
| bias-disable; |
| }; |
| |
| reset-n-pins { |
| pins = "gpio48"; |
| function = "gpio"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| }; |
| }; |
| |
| &usb_0 { |
| dr_mode = "host"; |
| |
| status = "okay"; |
| }; |
| |
| &usb_0_dwc3_hs { |
| remote-endpoint = <&pmic_glink_hs_in>; |
| }; |
| |
| &usb_0_hsphy { |
| vdd-supply = <&vreg_l3f_e0_0p72>; |
| vdda12-supply = <&vreg_l4h_e0_1p2>; |
| |
| phys = <&smb2370_j_e2_eusb2_repeater>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_0_qmpphy { |
| vdda-phy-supply = <&vreg_l4h_e0_1p2>; |
| vdda-pll-supply = <&vreg_l3f_e0_0p72>; |
| refgen-supply = <&vreg_l2f_e0_0p82>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_0_qmpphy_out { |
| remote-endpoint = <&pmic_glink_ss_in>; |
| }; |
| |
| &usb_1 { |
| dr_mode = "host"; |
| |
| status = "okay"; |
| }; |
| |
| &usb_1_dwc3_hs { |
| remote-endpoint = <&pmic_glink_hs_in1>; |
| }; |
| |
| &usb_1_hsphy { |
| vdd-supply = <&vreg_l3f_e0_0p72>; |
| vdda12-supply = <&vreg_l4h_e0_1p2>; |
| |
| phys = <&smb2370_k_e2_eusb2_repeater>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_1_qmpphy { |
| vdda-phy-supply = <&vreg_l4h_e0_1p2>; |
| vdda-pll-supply = <&vreg_l1h_e0_0p89>; |
| refgen-supply = <&vreg_l2f_e0_0p82>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_1_qmpphy_out { |
| remote-endpoint = <&pmic_glink_ss_in1>; |
| }; |
| |
| &usb_hs { |
| status = "okay"; |
| }; |
| |
| &usb_hs_phy { |
| vdd-supply = <&vreg_l2h_e0_0p72>; |
| vdda12-supply = <&vreg_l4h_e0_1p2>; |
| |
| phys = <&ptn3222_1>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_mp { |
| status = "okay"; |
| }; |
| |
| &usb_mp_hsphy0 { |
| vdd-supply = <&vreg_l2h_e0_0p72>; |
| vdda12-supply = <&vreg_l4h_e0_1p2>; |
| |
| phys = <&ptn3222_0>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_mp_hsphy1 { |
| vdd-supply = <&vreg_l2h_e0_0p72>; |
| vdda12-supply = <&vreg_l4h_e0_1p2>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_mp_qmpphy0 { |
| vdda-phy-supply = <&vreg_l4h_e0_1p2>; |
| vdda-pll-supply = <&vreg_l2h_e0_0p72>; |
| refgen-supply = <&vreg_l4f_e1_1p08>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_mp_qmpphy1 { |
| vdda-phy-supply = <&vreg_l4h_e0_1p2>; |
| vdda-pll-supply = <&vreg_l2h_e0_0p72>; |
| refgen-supply = <&vreg_l4f_e1_1p08>; |
| |
| status = "okay"; |
| }; |
