| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. |
| */ |
| |
| #include <dt-bindings/clock/qcom,glymur-dispcc.h> |
| #include <dt-bindings/clock/qcom,glymur-gcc.h> |
| #include <dt-bindings/clock/qcom,glymur-tcsr.h> |
| #include <dt-bindings/clock/qcom,rpmh.h> |
| #include <dt-bindings/dma/qcom-gpi.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interconnect/qcom,icc.h> |
| #include <dt-bindings/interconnect/qcom,glymur-rpmh.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/mailbox/qcom-ipcc.h> |
| #include <dt-bindings/phy/phy-qcom-qmp.h> |
| #include <dt-bindings/power/qcom,rpmhpd.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include <dt-bindings/soc/qcom,rpmh-rsc.h> |
| #include <dt-bindings/spmi/spmi.h> |
| |
| #include "glymur-ipcc.h" |
| |
| / { |
| interrupt-parent = <&intc>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-2"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd0>, <&scmi_perf 0>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_0>; |
| |
| l2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| }; |
| |
| cpu1: cpu@100 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-2"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd1>, <&scmi_perf 0>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_0>; |
| }; |
| |
| cpu2: cpu@200 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-2"; |
| reg = <0x0 0x200>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd2>, <&scmi_perf 0>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_0>; |
| }; |
| |
| cpu3: cpu@300 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-2"; |
| reg = <0x0 0x300>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd3>, <&scmi_perf 0>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_0>; |
| }; |
| |
| cpu4: cpu@400 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-2"; |
| reg = <0x0 0x400>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd4>, <&scmi_perf 0>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_0>; |
| }; |
| |
| cpu5: cpu@500 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-2"; |
| reg = <0x0 0x500>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd5>, <&scmi_perf 0>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_0>; |
| }; |
| |
| cpu6: cpu@10000 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x10000>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd6>, <&scmi_perf 1>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_1>; |
| |
| l2_1: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| }; |
| |
| cpu7: cpu@10100 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x10100>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd7>, <&scmi_perf 1>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_1>; |
| }; |
| |
| cpu8: cpu@10200 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x10200>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd8>, <&scmi_perf 1>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_1>; |
| }; |
| |
| cpu9: cpu@10300 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x10300>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd9>, <&scmi_perf 1>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_1>; |
| }; |
| |
| cpu10: cpu@10400 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x10400>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd10>, <&scmi_perf 1>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_1>; |
| }; |
| |
| cpu11: cpu@10500 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x10500>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd11>, <&scmi_perf 1>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_1>; |
| }; |
| |
| cpu12: cpu@20000 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x20000>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd12>, <&scmi_perf 2>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_2>; |
| |
| l2_2: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| }; |
| }; |
| |
| cpu13: cpu@20100 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x20100>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd13>, <&scmi_perf 2>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_2>; |
| }; |
| |
| cpu14: cpu@20200 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x20200>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd14>, <&scmi_perf 2>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_2>; |
| }; |
| |
| cpu15: cpu@20300 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x20300>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd15>, <&scmi_perf 2>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_2>; |
| }; |
| |
| cpu16: cpu@20400 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x20400>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd16>, <&scmi_perf 2>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_2>; |
| }; |
| |
| cpu17: cpu@20500 { |
| device_type = "cpu"; |
| compatible = "qcom,oryon-2-1"; |
| reg = <0x0 0x20500>; |
| enable-method = "psci"; |
| power-domains = <&cpu_pd17>, <&scmi_perf 2>; |
| power-domain-names = "psci", "perf"; |
| next-level-cache = <&l2_2>; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&cpu0>; |
| }; |
| |
| core1 { |
| cpu = <&cpu1>; |
| }; |
| |
| core2 { |
| cpu = <&cpu2>; |
| }; |
| |
| core3 { |
| cpu = <&cpu3>; |
| }; |
| |
| core4 { |
| cpu = <&cpu4>; |
| }; |
| |
| core5 { |
| cpu = <&cpu5>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&cpu6>; |
| }; |
| |
| core1 { |
| cpu = <&cpu7>; |
| }; |
| |
| core2 { |
| cpu = <&cpu8>; |
| }; |
| |
| core3 { |
| cpu = <&cpu9>; |
| }; |
| |
| core4 { |
| cpu = <&cpu10>; |
| }; |
| |
| core5 { |
| cpu = <&cpu11>; |
| }; |
| }; |
| |
| cpu_map_cluster2: cluster2 { |
| core0 { |
| cpu = <&cpu12>; |
| }; |
| |
| core1 { |
| cpu = <&cpu13>; |
| }; |
| |
| core2 { |
| cpu = <&cpu14>; |
| }; |
| |
| core3 { |
| cpu = <&cpu15>; |
| }; |
| |
| core4 { |
| cpu = <&cpu16>; |
| }; |
| |
| core5 { |
| cpu = <&cpu17>; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| cpu_c4: cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "ret"; |
| arm,psci-suspend-param = <0x00000004>; |
| entry-latency-us = <180>; |
| exit-latency-us = <320>; |
| min-residency-us = <1000>; |
| }; |
| }; |
| |
| domain-idle-states { |
| cluster_cl5: cluster-sleep-0 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x01000054>; |
| entry-latency-us = <2000>; |
| exit-latency-us = <2000>; |
| min-residency-us = <9000>; |
| }; |
| |
| domain_ss3: domain-sleep-0 { |
| compatible = "domain-idle-state"; |
| arm,psci-suspend-param = <0x0200c354>; |
| entry-latency-us = <2800>; |
| exit-latency-us = <4400>; |
| min-residency-us = <10150>; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm: scm { |
| compatible = "qcom,scm-glymur", "qcom,scm"; |
| qcom,dload-mode = <&tcsr 0x4000>; |
| interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| }; |
| |
| scmi { |
| compatible = "arm,scmi"; |
| mboxes = <&pdp0_mbox 0>, <&pdp0_mbox 1>; |
| mbox-names = "tx", "rx"; |
| shmem = <&cpu_scp_lpri1>, <&cpu_scp_lpri0>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| scmi_perf: protocol@13 { |
| reg = <0x13>; |
| #power-domain-cells = <1>; |
| }; |
| }; |
| }; |
| |
| clk_virt: interconnect-0 { |
| compatible = "qcom,glymur-clk-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| mc_virt: interconnect-1 { |
| compatible = "qcom,glymur-mc-virt"; |
| #interconnect-cells = <2>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| |
| cpu_pd0: power-domain-cpu0 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster0_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd1: power-domain-cpu1 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster0_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd2: power-domain-cpu2 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster0_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd3: power-domain-cpu3 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster0_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd4: power-domain-cpu4 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster0_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd5: power-domain-cpu5 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster0_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd6: power-domain-cpu6 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster1_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd7: power-domain-cpu7 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster1_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd8: power-domain-cpu8 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster1_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd9: power-domain-cpu9 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster1_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd10: power-domain-cpu10 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster1_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd11: power-domain-cpu11 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster1_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd12: power-domain-cpu12 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster2_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd13: power-domain-cpu13 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster2_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd14: power-domain-cpu14 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster2_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd15: power-domain-cpu15 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster2_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd16: power-domain-cpu16 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster2_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cpu_pd17: power-domain-cpu17 { |
| #power-domain-cells = <0>; |
| power-domains = <&cluster2_pd>; |
| domain-idle-states = <&cpu_c4>; |
| }; |
| |
| cluster0_pd: power-domain-cpu-cluster0 { |
| #power-domain-cells = <0>; |
| power-domains = <&system_pd>; |
| domain-idle-states = <&cluster_cl5>; |
| }; |
| |
| cluster1_pd: power-domain-cpu-cluster1 { |
| #power-domain-cells = <0>; |
| power-domains = <&system_pd>; |
| domain-idle-states = <&cluster_cl5>; |
| }; |
| |
| cluster2_pd: power-domain-cpu-cluster2 { |
| #power-domain-cells = <0>; |
| power-domains = <&system_pd>; |
| domain-idle-states = <&cluster_cl5>; |
| }; |
| |
| system_pd: power-domain-system { |
| #power-domain-cells = <0>; |
| domain-idle-states = <&domain_ss3>; |
| }; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| pdp_mem: pdp@81400000 { |
| reg = <0x0 0x81400000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| aop_cmd_db_mem: aop-cmd-db@81c60000 { |
| compatible = "qcom,cmd-db"; |
| reg = <0x0 0x81c60000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| pdp_ns_shared_mem: pdp-ns-shared@81e00000 { |
| reg = <0x0 0x81e00000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| oobdaretag_mem: oobdaretag@86e10000 { |
| reg = <0x0 0x86e10000 0x0 0x360000>; |
| no-map; |
| }; |
| |
| oob_secure_mem: oob-secure@87170000 { |
| reg = <0x0 0x87170000 0x0 0xbc0000>; |
| no-map; |
| }; |
| |
| oobdtbqc_mem: oobdtbqc@87d30000 { |
| reg = <0x0 0x87d30000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| oobdtboem_mem: oobdtboem@87d50000 { |
| reg = <0x0 0x87d50000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| oob_nonsecure_mem: oob-nonsecure@87e00000 { |
| reg = <0x0 0x87e00000 0x0 0xc00000>; |
| no-map; |
| }; |
| |
| spss_region_mem: spss@88a00000 { |
| reg = <0x0 0x88a00000 0x0 0x400000>; |
| no-map; |
| }; |
| |
| soccpdtb_mem: soccpdtb@892e0000 { |
| reg = <0x0 0x892e0000 0x0 0x20000>; |
| no-map; |
| }; |
| |
| soccp_mem: soccp@89300000 { |
| reg = <0x0 0x89300000 0x0 0x400000>; |
| no-map; |
| }; |
| |
| cvp_mem: cvp@89700000 { |
| reg = <0x0 0x89700000 0x0 0x700000>; |
| no-map; |
| }; |
| |
| adspslpi_mem: adspslpi@89e00000 { |
| reg = <0x0 0x89e00000 0x0 0x3a00000>; |
| no-map; |
| }; |
| |
| q6_adsp_dtb_mem: q6-adsp-dtb@8d800000 { |
| reg = <0x0 0x8d800000 0x0 0x80000>; |
| no-map; |
| }; |
| |
| cdsp_mem: cdsp@8d900000 { |
| reg = <0x0 0x8d900000 0x0 0x4000000>; |
| no-map; |
| }; |
| |
| q6_cdsp_dtb_mem: q6-cdsp-dtb@91900000 { |
| reg = <0x0 0x91900000 0x0 0x80000>; |
| no-map; |
| }; |
| |
| gpu_microcode_mem: gpu-microcode@919fe000 { |
| reg = <0x0 0x919fe000 0x0 0x2000>; |
| no-map; |
| }; |
| |
| camera_mem: camera@91a00000 { |
| reg = <0x0 0x91a00000 0x0 0x800000>; |
| no-map; |
| }; |
| |
| av1_encoder_mem: av1-encoder@92200000 { |
| reg = <0x0 0x92200000 0x0 0x700000>; |
| no-map; |
| }; |
| |
| video_mem: video@92900000 { |
| reg = <0x0 0x92900000 0x0 0xc00000>; |
| no-map; |
| }; |
| |
| smem_mem: smem@ffe00000 { |
| compatible = "qcom,smem"; |
| reg = <0x0 0xffe00000 0x0 0x200000>; |
| hwlocks = <&tcsr_mutex 3>; |
| no-map; |
| }; |
| }; |
| |
| smp2p-adsp { |
| compatible = "qcom,smp2p"; |
| |
| interrupts-extended = <&ipcc IPCC_MPROC_LPASS |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_MPROC_LPASS IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,smem = <443>, <429>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <2>; |
| |
| smp2p_adsp_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_adsp_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-cdsp { |
| compatible = "qcom,smp2p"; |
| |
| interrupts-extended = <&ipcc IPCC_MPROC_CDSP |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_MPROC_CDSP IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,smem = <94>, <432>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <5>; |
| |
| smp2p_cdsp_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| smp2p_cdsp_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-soccp { |
| compatible = "qcom,smp2p"; |
| |
| interrupts-extended = <&ipcc IPCC_MPROC_SOCCP |
| IPCC_MPROC_SIGNAL_SMP2P |
| IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&ipcc IPCC_MPROC_SOCCP |
| IPCC_MPROC_SIGNAL_SMP2P>; |
| |
| qcom,smem = <617>, <616>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <19>; |
| |
| soccp_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| soccp_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; |
| dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; |
| |
| gcc: clock-controller@100000 { |
| compatible = "qcom,glymur-gcc"; |
| reg = <0x0 0x00100000 0x0 0x1f9000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, /* Board XO source */ |
| <&rpmhcc RPMH_CXO_CLK_A>, /* Board XO_A source */ |
| <&sleep_clk>, /* Sleep */ |
| <0>, /* USB 0 Phy DP0 GMUX */ |
| <0>, /* USB 0 Phy DP1 GMUX */ |
| <0>, /* USB 0 Phy PCIE PIPEGMUX */ |
| <0>, /* USB 0 Phy PIPEGMUX */ |
| <0>, /* USB 0 Phy SYS PCIE PIPEGMUX */ |
| <0>, /* USB 1 Phy DP0 GMUX 2 */ |
| <0>, /* USB 1 Phy DP1 GMUX 2 */ |
| <0>, /* USB 1 Phy PCIE PIPEGMUX */ |
| <0>, /* USB 1 Phy PIPEGMUX */ |
| <0>, /* USB 1 Phy SYS PCIE PIPEGMUX */ |
| <0>, /* USB 2 Phy DP0 GMUX 2 */ |
| <0>, /* USB 2 Phy DP1 GMUX 2 */ |
| <0>, /* USB 2 Phy PCIE PIPEGMUX */ |
| <0>, /* USB 2 Phy PIPEGMUX */ |
| <0>, /* USB 2 Phy SYS PCIE PIPEGMUX */ |
| <0>, /* PCIe 3a */ |
| <&pcie3b_phy>, /* PCIe 3b */ |
| <&pcie4_phy>, /* PCIe 4 */ |
| <&pcie5_phy>, /* PCIe 5 */ |
| <&pcie6_phy>, /* PCIe 6 */ |
| <0>, /* QUSB4 0 PHY RX 0 */ |
| <0>, /* QUSB4 0 PHY RX 1 */ |
| <0>, /* QUSB4 1 PHY RX 0 */ |
| <0>, /* QUSB4 1 PHY RX 1 */ |
| <0>, /* QUSB4 2 PHY RX 0 */ |
| <0>, /* QUSB4 2 PHY RX 1 */ |
| <0>, /* UFS PHY RX Symbol 0 */ |
| <0>, /* UFS PHY RX Symbol 1 */ |
| <0>, /* UFS PHY TX Symbol 0 */ |
| <&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, |
| <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, |
| <&usb_2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, |
| <&usb_mp_qmpphy0 QMP_USB43DP_USB3_PIPE_CLK>, |
| <&usb_mp_qmpphy1 QMP_USB43DP_USB3_PIPE_CLK>, |
| <0>, /* USB4 PHY 0 pcie pipe */ |
| <0>, /* USB4 PHY 0 Max pipe */ |
| <0>, /* USB4 PHY 1 pcie pipe */ |
| <0>, /* USB4 PHY 1 Max pipe */ |
| <0>, /* USB4 PHY 2 pcie */ |
| <0>; /* USB4 PHY 2 Max */ |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| gpi_dma2: dma-controller@800000 { |
| compatible = "qcom,glymur-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0x0 0x00800000 0x0 0x60000>; |
| interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 129 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 130 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 131 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 132 IRQ_TYPE_LEVEL_HIGH>; |
| dma-channels = <16>; |
| dma-channel-mask = <0x3f>; |
| #dma-cells = <3>; |
| iommus = <&apps_smmu 0xd76 0x0>; |
| }; |
| |
| qupv3_2: geniqup@8c0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0x008c0000 0x0 0x3000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; |
| clock-names = "m-ahb", |
| "s-ahb"; |
| iommus = <&apps_smmu 0xd63 0x0>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| i2c16: i2c@880000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00880000 0x0 0x4000>; |
| interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 0 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c16_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi16: spi@880000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00880000 0x0 0x4000>; |
| interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 0 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c17: i2c@884000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00884000 0x0 0x4000>; |
| interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 1 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c17_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi17: spi@884000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00884000 0x0 0x4000>; |
| interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 1 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c18: i2c@888000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00888000 0x0 0x4000>; |
| interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 2 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c18_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi18: spi@888000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00888000 0x0 0x4000>; |
| interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 2 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c19: i2c@88c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x0088c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 3 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c19_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi19: spi@88c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x0088c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 3 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| uart19: serial@88c000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x0088c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| pinctrl-0 = <&qup_uart19_default>; |
| pinctrl-names = "default"; |
| |
| status = "disabled"; |
| }; |
| |
| i2c20: i2c@890000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00890000 0x0 0x4000>; |
| interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 4 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c20_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi20: spi@890000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00890000 0x0 0x4000>; |
| interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 4 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c21: i2c@894000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00894000 0x0 0x4000>; |
| interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 5 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c21_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi21: spi@894000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00894000 0x0 0x4000>; |
| interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 5 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| uart21: serial@894000 { |
| compatible = "qcom,geni-debug-uart"; |
| reg = <0x0 0x00894000 0x0 0x4000>; |
| interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| pinctrl-0 = <&qup_uart21_default>; |
| pinctrl-names = "default"; |
| }; |
| |
| i2c22: i2c@898000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00898000 0x0 0x4000>; |
| interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 6 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c22_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi22: spi@898000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00898000 0x0 0x4000>; |
| interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 6 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| uart22: serial@898000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x00898000 0x0 0x4000>; |
| interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| pinctrl-0 = <&qup_uart22_default>; |
| pinctrl-names = "default"; |
| |
| status = "disabled"; |
| }; |
| |
| i2c23: i2c@89c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x0089c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>, |
| <&gpi_dma2 1 7 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c23_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi23: spi@89c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x0089c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>, |
| <&gpi_dma2 1 7 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| gpi_dma1: dma-controller@a00000 { |
| compatible = "qcom,glymur-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0x0 0x00a00000 0x0 0x60000>; |
| interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 126 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 127 IRQ_TYPE_LEVEL_HIGH>; |
| dma-channels = <16>; |
| dma-channel-mask = <0x3f>; |
| #dma-cells = <3>; |
| iommus = <&apps_smmu 0xcb6 0x0>; |
| }; |
| |
| qupv3_1: geniqup@ac0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0x00ac0000 0x0 0x3000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; |
| clock-names = "m-ahb", |
| "s-ahb"; |
| iommus = <&apps_smmu 0xca3 0x0>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| i2c8: i2c@a80000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00a80000 0x0 0x4000>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 0 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c8_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi8: spi@a80000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00a80000 0x0 0x4000>; |
| interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 0 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c9: i2c@a84000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00a84000 0x0 0x4000>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 1 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c9_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi9: spi@a84000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00a84000 0x0 0x4000>; |
| interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 1 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c10: i2c@a88000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00a88000 0x0 0x4000>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 2 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c10_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi10: spi@a88000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00a88000 0x0 0x4000>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 2 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c11: i2c@a8c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00a8c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 3 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c11_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi11: spi@a8c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00a8c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 3 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c12: i2c@a90000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00a90000 0x0 0x4000>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 4 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c12_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi12: spi@a90000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00a90000 0x0 0x4000>; |
| interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 4 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c13: i2c@a94000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00a94000 0x0 0x4000>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 5 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c13_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi13: spi@a94000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00a94000 0x0 0x4000>; |
| interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 5 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c14: i2c@a98000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00a98000 0x0 0x4000>; |
| interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 6 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c14_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi14: spi@a98000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00a98000 0x0 0x4000>; |
| interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 6 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| uart14: serial@a98000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x00a98000 0x0 0x4000>; |
| interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| pinctrl-0 = <&qup_uart14_default>; |
| pinctrl-names = "default"; |
| |
| status = "disabled"; |
| }; |
| |
| i2c15: i2c@a9c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00a9c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, |
| <&gpi_dma1 1 7 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c15_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi15: spi@a9c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00a9c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, |
| <&gpi_dma1 1 7 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| gpi_dma0: dma-controller@b00000 { |
| compatible = "qcom,glymur-gpi-dma", "qcom,sm6350-gpi-dma"; |
| reg = <0x0 0x00b00000 0x0 0x60000>; |
| interrupts = <GIC_ESPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 77 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 78 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 79 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 80 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 81 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 82 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 83 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 84 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 85 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 86 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 87 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 88 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 89 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 90 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_ESPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| dma-channels = <16>; |
| dma-channel-mask = <0x3f>; |
| #dma-cells = <3>; |
| iommus = <&apps_smmu 0xd36 0x0>; |
| }; |
| |
| qupv3_0: geniqup@bc0000 { |
| compatible = "qcom,geni-se-qup"; |
| reg = <0x0 0x00bc0000 0x0 0x3000>; |
| clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, |
| <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; |
| clock-names = "m-ahb", |
| "s-ahb"; |
| iommus = <&apps_smmu 0xd23 0x0>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| i2c0: i2c@b80000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00b80000 0x0 0x4000>; |
| interrupts = <GIC_ESPI 92 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 0 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c0_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi0: spi@b80000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00b80000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1052 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 0 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@b84000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00b84000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1053 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 1 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c1_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi1: spi@b84000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00b84000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1053 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 1 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@b88000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00b88000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1054 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 2 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c2_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi2: spi@b88000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00b88000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1054 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 2 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| uart2: serial@b88000 { |
| compatible = "qcom,geni-uart"; |
| reg = <0x0 0x00b88000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1054 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config"; |
| pinctrl-0 = <&qup_uart2_default>; |
| pinctrl-names = "default"; |
| |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@b8c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00b8c000 0x0 0x4000>; |
| interrupts = <GIC_ESPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 3 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c3_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi3: spi@b8c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00b8c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1055 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 3 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@b90000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00b90000 0x0 0x4000>; |
| interrupts = <GIC_ESPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 4 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c4_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi4: spi@b90000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00b90000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1056 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 4 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@b94000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00b94000 0x0 0x4000>; |
| interrupts = <GIC_ESPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 5 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c5_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi5: spi@b94000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00b94000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1057 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 5 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@b98000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00b98000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1058 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 6 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c6_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi6: spi@b98000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00b98000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1058 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 6 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@b9c000 { |
| compatible = "qcom,geni-i2c"; |
| reg = <0x0 0x00b9c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1059 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, |
| <&gpi_dma0 1 7 QCOM_GPI_I2C>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_i2c7_data_clk>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| spi7: spi@b9c000 { |
| compatible = "qcom,geni-spi"; |
| reg = <0x0 0x00b9c000 0x0 0x4000>; |
| interrupts = <GIC_SPI 1059 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; |
| clock-names = "se"; |
| interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS |
| &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, |
| <&aggre3_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "qup-core", |
| "qup-config", |
| "qup-memory"; |
| dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, |
| <&gpi_dma0 1 7 QCOM_GPI_SPI>; |
| dma-names = "tx", |
| "rx"; |
| pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; |
| pinctrl-names = "default"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| usb_hs_phy: phy@fa0000 { |
| compatible = "qcom,glymur-m31-eusb2-phy", |
| "qcom,sm8750-m31-eusb2-phy"; |
| reg = <0x0 0x00fa0000 0x0 0x154>; |
| #phy-cells = <0>; |
| |
| clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_USB20_HS_BCR>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_mp_hsphy0: phy@fa1000 { |
| compatible = "qcom,glymur-m31-eusb2-phy", |
| "qcom,sm8750-m31-eusb2-phy"; |
| |
| reg = <0x0 0x00fa1000 0x0 0x29c>; |
| #phy-cells = <0>; |
| |
| clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_mp_hsphy1: phy@fa2000 { |
| compatible = "qcom,glymur-m31-eusb2-phy", |
| "qcom,sm8750-m31-eusb2-phy"; |
| |
| reg = <0x0 0x00fa2000 0x0 0x29c>; |
| #phy-cells = <0>; |
| |
| clocks = <&tcsr TCSR_USB2_2_CLKREF_EN>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_mp_qmpphy0: phy@fa3000 { |
| compatible = "qcom,glymur-qmp-usb3-uni-phy"; |
| reg = <0x0 0x00fa3000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, |
| <&tcsr TCSR_USB3_0_CLKREF_EN>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; |
| clock-names = "aux", |
| "clkref", |
| "ref", |
| "com_aux", |
| "pipe"; |
| |
| power-domains = <&gcc GCC_USB3_MP_SS0_PHY_GDSC>; |
| |
| resets = <&gcc GCC_USB3_MP_SS0_PHY_BCR>, |
| <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; |
| reset-names = "phy", |
| "phy_phy"; |
| |
| clock-output-names = "usb3_uni_phy_0_pipe_clk_src"; |
| #clock-cells = <0>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_mp_qmpphy1: phy@fa5000 { |
| compatible = "qcom,glymur-qmp-usb3-uni-phy"; |
| reg = <0x0 0x00fa5000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, |
| <&tcsr TCSR_USB3_1_CLKREF_EN>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; |
| clock-names = "aux", |
| "clkref", |
| "ref", |
| "com_aux", |
| "pipe"; |
| |
| power-domains = <&gcc GCC_USB3_MP_SS1_PHY_GDSC>; |
| |
| resets = <&gcc GCC_USB3_MP_SS1_PHY_BCR>, |
| <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; |
| reset-names = "phy", |
| "phy_phy"; |
| |
| clock-output-names = "usb3_uni_phy_1_pipe_clk_src"; |
| |
| #clock-cells = <0>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| mdss_dp3_phy: phy@faac00 { |
| compatible = "qcom,glymur-dp-phy"; |
| reg = <0x0 0x00faac00 0x0 0x1d0>, |
| <0x0 0x00faa400 0x0 0x128>, |
| <0x0 0x00faa800 0x0 0x128>, |
| <0x0 0x00faa000 0x0 0x358>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&tcsr TCSR_EDP_CLKREF_EN>; |
| clock-names = "aux", |
| "cfg_ahb", |
| "ref"; |
| |
| power-domains = <&rpmhpd RPMHPD_MX>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_0_hsphy: phy@fd3000 { |
| compatible = "qcom,glymur-m31-eusb2-phy", |
| "qcom,sm8750-m31-eusb2-phy"; |
| |
| reg = <0x0 0x00fd3000 0x0 0x29c>; |
| #phy-cells = <0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_0_qmpphy: phy@fd5000 { |
| compatible = "qcom,glymur-qmp-usb3-dp-phy"; |
| reg = <0x0 0x00fd5000 0x0 0x8000>; |
| |
| clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; |
| clock-names = "aux", |
| "ref", |
| "com_aux", |
| "usb3_pipe"; |
| |
| resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, |
| <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; |
| |
| reset-names = "phy", |
| "common"; |
| |
| power-domains = <&gcc GCC_USB_0_PHY_GDSC>; |
| |
| #clock-cells = <1>; |
| #phy-cells = <1>; |
| |
| mode-switch; |
| orientation-switch; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_0_qmpphy_out: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_0_qmpphy_usb_ss_in: endpoint { |
| remote-endpoint = <&usb_0_dwc3_ss>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| |
| usb_dp_qmpphy_dp_in: endpoint { |
| remote-endpoint = <&mdss_dp0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb_1_hsphy: phy@fdd000 { |
| compatible = "qcom,glymur-m31-eusb2-phy", |
| "qcom,sm8750-m31-eusb2-phy"; |
| |
| reg = <0x0 0x00fdd000 0x0 0x29c>; |
| #phy-cells = <0>; |
| |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_1_qmpphy: phy@fde000 { |
| compatible = "qcom,glymur-qmp-usb3-dp-phy"; |
| reg = <0x0 0x00fde000 0x0 0x8000>; |
| |
| clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>, |
| <&tcsr TCSR_USB4_1_CLKREF_EN>; |
| clock-names = "aux", |
| "ref", |
| "com_aux", |
| "usb3_pipe", |
| "clkref"; |
| |
| power-domains = <&gcc GCC_USB_1_PHY_GDSC>; |
| |
| resets = <&gcc GCC_USB3_PHY_SEC_BCR>, |
| <&gcc GCC_USB3PHY_PHY_SEC_BCR>; |
| reset-names = "phy", |
| "common"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <1>; |
| |
| mode-switch; |
| orientation-switch; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_1_qmpphy_out: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_1_qmpphy_usb_ss_in: endpoint { |
| remote-endpoint = <&usb_1_dwc3_ss>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| |
| usb_1_qmpphy_dp_in: endpoint { |
| remote-endpoint = <&mdss_dp1_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| |
| /* cluster0 */ |
| bwmon_cluster0: pmu@100c400 { |
| compatible = "qcom,glymur-cpu-bwmon", "qcom,sdm845-bwmon"; |
| reg = <0x0 0x0100c400 0x0 0x600>; |
| |
| interrupts = <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; |
| |
| operating-points-v2 = <&cpu_bwmon_opp_table>; |
| |
| cpu_bwmon_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-0 { |
| opp-peak-kBps = <800000>; |
| }; |
| |
| opp-1 { |
| opp-peak-kBps = <2188800>; |
| }; |
| |
| opp-2 { |
| opp-peak-kBps = <5414400>; |
| }; |
| |
| opp-3 { |
| opp-peak-kBps = <6220800>; |
| }; |
| |
| opp-4 { |
| opp-peak-kBps = <6835200>; |
| }; |
| |
| opp-5 { |
| opp-peak-kBps = <8371200>; |
| }; |
| |
| opp-6 { |
| opp-peak-kBps = <10944000>; |
| }; |
| |
| opp-7 { |
| opp-peak-kBps = <12748800>; |
| }; |
| |
| opp-8 { |
| opp-peak-kBps = <14745600>; |
| }; |
| |
| opp-9 { |
| opp-peak-kBps = <16896000>; |
| }; |
| |
| opp-10 { |
| opp-peak-kBps = <19046400>; |
| }; |
| |
| opp-11 { |
| opp-peak-kBps = <21332000>; |
| }; |
| }; |
| }; |
| |
| /* cluster1 */ |
| bwmon_cluster1: pmu@100d400 { |
| compatible = "qcom,glymur-cpu-bwmon", "qcom,sdm845-bwmon"; |
| reg = <0x0 0x0100d400 0x0 0x600>; |
| |
| interrupts = <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; |
| |
| operating-points-v2 = <&cpu_bwmon_opp_table>; |
| }; |
| |
| /* cluster2 */ |
| bwmon_cluster2: pmu@100e400 { |
| compatible = "qcom,glymur-cpu-bwmon", "qcom,sdm845-bwmon"; |
| reg = <0x0 0x0100e400 0x0 0x600>; |
| |
| interrupts = <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>; |
| |
| interconnects = <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; |
| |
| operating-points-v2 = <&cpu_bwmon_opp_table>; |
| }; |
| cnoc_main: interconnect@1500000 { |
| compatible = "qcom,glymur-cnoc-main"; |
| reg = <0x0 0x01500000 0x0 0x17080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| config_noc: interconnect@1600000 { |
| compatible = "qcom,glymur-cnoc-cfg"; |
| reg = <0x0 0x01600000 0x0 0x6600>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| system_noc: interconnect@1680000 { |
| compatible = "qcom,glymur-system-noc"; |
| reg = <0x0 0x01680000 0x0 0x1c080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| pcie_west_anoc: interconnect@16c0000 { |
| compatible = "qcom,glymur-pcie-west-anoc"; |
| reg = <0x0 0x016c0000 0x0 0xf580>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| clocks = <&gcc GCC_AGGRE_NOC_PCIE_3A_WEST_SF_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_3B_WEST_SF_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_4_WEST_SF_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_6_WEST_SF_AXI_CLK>; |
| }; |
| |
| pcie_east_anoc: interconnect@16d0000 { |
| compatible = "qcom,glymur-pcie-east-anoc"; |
| reg = <0x0 0x016d0000 0x0 0xf300>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| clocks = <&gcc GCC_AGGRE_NOC_PCIE_5_EAST_SF_AXI_CLK>; |
| }; |
| |
| aggre1_noc: interconnect@16e0000 { |
| compatible = "qcom,glymur-aggre1-noc"; |
| reg = <0x0 0x016e0000 0x0 0x14400>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| aggre2_noc: interconnect@1720000 { |
| compatible = "qcom,glymur-aggre2-noc"; |
| reg = <0x0 0x01720000 0x0 0x14400>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| clocks = <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>, |
| <&gcc GCC_AGGRE_USB4_2_AXI_CLK>, |
| <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>; |
| }; |
| |
| aggre3_noc: interconnect@1700000 { |
| compatible = "qcom,glymur-aggre3-noc"; |
| reg = <0x0 0x01700000 0x0 0x1d400>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| aggre4_noc: interconnect@1740000 { |
| compatible = "qcom,glymur-aggre4-noc"; |
| reg = <0x0 0x01740000 0x0 0x14400>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, |
| <&gcc GCC_AGGRE_USB4_0_AXI_CLK>, |
| <&gcc GCC_AGGRE_USB4_1_AXI_CLK>; |
| }; |
| |
| mmss_noc: interconnect@1780000 { |
| compatible = "qcom,glymur-mmss-noc"; |
| reg = <0x0 0x01780000 0x0 0x5b800>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| pcie_east_slv_noc: interconnect@1900000 { |
| compatible = "qcom,glymur-pcie-east-slv-noc"; |
| reg = <0x0 0x01900000 0x0 0xe080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| pcie_west_slv_noc: interconnect@1920000 { |
| compatible = "qcom,glymur-pcie-west-slv-noc"; |
| reg = <0x0 0x01920000 0x0 0xf180>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| pcie4: pci@1bf0000 { |
| device_type = "pci"; |
| compatible = "qcom,glymur-pcie", "qcom,pcie-x1e80100"; |
| reg = <0x0 0x01bf0000 0x0 0x3000>, |
| <0x0 0x78000000 0x0 0xf20>, |
| <0x0 0x78000f40 0x0 0xa8>, |
| <0x0 0x78001000 0x0 0x4000>, |
| <0x0 0x78005000 0x0 0x100000>, |
| <0x0 0x01bf3000 0x0 0x1000>; |
| reg-names = "parf", |
| "dbi", |
| "elbi", |
| "atu", |
| "config", |
| "mhi"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x78105000 0x0 0x100000>, |
| <0x02000000 0x0 0x78205000 0x0 0x78205000 0x0 0x1dfb000>, |
| <0x03000000 0x7 0x80000000 0x7 0x80000000 0x0 0x20000000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <4>; |
| num-lanes = <2>; |
| |
| operating-points-v2 = <&pcie4_opp_table>; |
| |
| msi-map = <0x0 &gic_its 0xc0000 0x10000>; |
| iommu-map = <0x0 &pcie_smmu 0x40000 0x10000>; |
| |
| interrupts = <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 512 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 944 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", |
| "msi1", |
| "msi2", |
| "msi3", |
| "msi4", |
| "msi5", |
| "msi6", |
| "msi7", |
| "global"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 0 513 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 0 514 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 0 515 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 0 516 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_4_AUX_CLK>, |
| <&gcc GCC_PCIE_4_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_4_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_4_WEST_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "noc_aggr"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&pcie_west_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &pcie_west_slv_noc SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "pcie-mem", |
| "cpu-pcie"; |
| |
| resets = <&gcc GCC_PCIE_4_BCR>, |
| <&gcc GCC_PCIE_4_LINK_DOWN_BCR>; |
| reset-names = "pci", |
| "link_down"; |
| |
| power-domains = <&gcc GCC_PCIE_4_GDSC>; |
| |
| eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; |
| eq-presets-16gts = /bits/ 8 <0x55 0x55>; |
| |
| status = "disabled"; |
| |
| pcie4_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| /* GEN 1 x1 */ |
| opp-2500000-1 { |
| opp-hz = /bits/ 64 <2500000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <250000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 1 x2 */ |
| opp-5000000-1 { |
| opp-hz = /bits/ 64 <5000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <500000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 2 x1 */ |
| opp-5000000-2 { |
| opp-hz = /bits/ 64 <5000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <500000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 2 x2 */ |
| opp-10000000-2 { |
| opp-hz = /bits/ 64 <10000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1000000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 3 x1 */ |
| opp-8000000-3 { |
| opp-hz = /bits/ 64 <8000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <984500 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 3 x2 */ |
| opp-16000000-3 { |
| opp-hz = /bits/ 64 <16000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1969000 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 4 x1 */ |
| opp-16000000-4 { |
| opp-hz = /bits/ 64 <16000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1969000 1>; |
| opp-level = <4>; |
| }; |
| |
| /* GEN 4 x2 */ |
| opp-32000000-4 { |
| opp-hz = /bits/ 64 <32000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <3938000 1>; |
| opp-level = <4>; |
| }; |
| |
| }; |
| |
| pcie4_port0: pcie@0 { |
| device_type = "pci"; |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| bus-range = <0x01 0xff>; |
| |
| phys = <&pcie4_phy>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| }; |
| }; |
| |
| pcie4_phy: phy@1bf6000 { |
| compatible = "qcom,glymur-qmp-gen4x2-pcie-phy"; |
| reg = <0x0 0x01bf6000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_PHY_4_AUX_CLK>, |
| <&gcc GCC_PCIE_4_CFG_AHB_CLK>, |
| <&tcsr TCSR_PCIE_2_CLKREF_EN>, |
| <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_4_PIPE_CLK>, |
| <&gcc GCC_PCIE_4_PIPE_DIV2_CLK>; |
| clock-names = "aux", |
| "cfg_ahb", |
| "ref", |
| "rchng", |
| "pipe", |
| "pipediv2"; |
| |
| resets = <&gcc GCC_PCIE_4_PHY_BCR>, |
| <&gcc GCC_PCIE_4_NOCSR_COM_PHY_BCR>; |
| reset-names = "phy", |
| "phy_nocsr"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| power-domains = <&gcc GCC_PCIE_4_PHY_GDSC>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie4_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie5: pci@1b40000 { |
| device_type = "pci"; |
| compatible = "qcom,glymur-pcie", "qcom,pcie-x1e80100"; |
| reg = <0x0 0x01b40000 0x0 0x3000>, |
| <0x0 0x7a000000 0x0 0xf20>, |
| <0x0 0x7a000f40 0x0 0xa8>, |
| <0x0 0x7a001000 0x0 0x4000>, |
| <0x0 0x7a100000 0x0 0x100000>, |
| <0x0 0x01b43000 0x0 0x1000>; |
| reg-names = "parf", |
| "dbi", |
| "elbi", |
| "atu", |
| "config", |
| "mhi"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x7a200000 0x0 0x100000>, |
| <0x02000000 0x0 0x7a300000 0x0 0x7a300000 0x0 0x3d00000>, |
| <0x03000000 0x7 0xa0000000 0x7 0xa0000000 0x0 0x40000000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <5>; |
| num-lanes = <4>; |
| |
| operating-points-v2 = <&pcie5_opp_table>; |
| |
| msi-map = <0x0 &gic_its 0xd0000 0x10000>; |
| iommu-map = <0x0 &pcie_smmu 0x50000 0x10000>; |
| |
| interrupts = <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 522 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 523 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 524 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 525 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 945 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", |
| "msi1", |
| "msi2", |
| "msi3", |
| "msi4", |
| "msi5", |
| "msi6", |
| "msi7", |
| "global"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 0 526 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 0 428 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 0 429 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_5_AUX_CLK>, |
| <&gcc GCC_PCIE_5_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_5_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_5_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_5_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_5_EAST_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "noc_aggr"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&pcie_east_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &pcie_east_slv_noc SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "pcie-mem", |
| "cpu-pcie"; |
| |
| resets = <&gcc GCC_PCIE_5_BCR>, |
| <&gcc GCC_PCIE_5_LINK_DOWN_BCR>; |
| reset-names = "pci", |
| "link_down"; |
| |
| power-domains = <&gcc GCC_PCIE_5_GDSC>; |
| |
| eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; |
| eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; |
| eq-presets-32gts = /bits/ 8 <0x55 0x55 0x55 0x55>; |
| |
| status = "disabled"; |
| |
| pcie5_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| /* GEN 1 x1 */ |
| opp-2500000-1 { |
| opp-hz = /bits/ 64 <2500000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <250000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 1 x2 */ |
| opp-5000000-1 { |
| opp-hz = /bits/ 64 <5000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <500000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 1 x4 */ |
| opp-10000000-1 { |
| opp-hz = /bits/ 64 <10000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1000000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 2 x1 */ |
| opp-5000000-2 { |
| opp-hz = /bits/ 64 <5000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <500000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 2 x2 */ |
| opp-10000000-2 { |
| opp-hz = /bits/ 64 <10000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1000000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 2 x4 */ |
| opp-20000000-2 { |
| opp-hz = /bits/ 64 <20000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <2000000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 3 x1 */ |
| opp-8000000-3 { |
| opp-hz = /bits/ 64 <8000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <984500 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 3 x2 */ |
| opp-16000000-3 { |
| opp-hz = /bits/ 64 <16000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1969000 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 3 x4 */ |
| opp-32000000-3 { |
| opp-hz = /bits/ 64 <32000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <3938000 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 4 x1 */ |
| opp-16000000-4 { |
| opp-hz = /bits/ 64 <16000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| opp-peak-kBps = <1969000 1>; |
| opp-level = <4>; |
| }; |
| |
| /* GEN 4 x2 */ |
| opp-32000000-4 { |
| opp-hz = /bits/ 64 <32000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| opp-peak-kBps = <3938000 1>; |
| opp-level = <4>; |
| }; |
| |
| /* GEN 4 x4 */ |
| opp-64000000-4 { |
| opp-hz = /bits/ 64 <64000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| opp-peak-kBps = <7876000 1>; |
| opp-level = <4>; |
| }; |
| |
| /* GEN 5 x1 */ |
| opp-32000000-5 { |
| opp-hz = /bits/ 64 <32000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| opp-peak-kBps = <3938000 1>; |
| opp-level = <5>; |
| }; |
| |
| /* GEN 5 x2 */ |
| opp-64000000-5 { |
| opp-hz = /bits/ 64 <64000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| opp-peak-kBps = <7876000 1>; |
| opp-level = <5>; |
| }; |
| |
| /* GEN 5 x4 */ |
| opp-128000000-5 { |
| opp-hz = /bits/ 64 <128000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| opp-peak-kBps = <15753000 1>; |
| opp-level = <5>; |
| }; |
| }; |
| |
| pcie5_port0: pcie@0 { |
| device_type = "pci"; |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| bus-range = <0x01 0xff>; |
| |
| phys = <&pcie5_phy>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| }; |
| }; |
| |
| pcie5_phy: phy@1b50000 { |
| compatible = "qcom,glymur-qmp-gen5x4-pcie-phy"; |
| reg = <0x0 0x01b50000 0x0 0x10000>; |
| |
| clocks = <&gcc GCC_PCIE_PHY_5_AUX_CLK>, |
| <&gcc GCC_PCIE_5_CFG_AHB_CLK>, |
| <&tcsr TCSR_PCIE_1_CLKREF_EN>, |
| <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_5_PIPE_CLK>, |
| <&gcc GCC_PCIE_5_PIPE_DIV2_CLK>; |
| clock-names = "aux", |
| "cfg_ahb", |
| "ref", |
| "rchng", |
| "pipe", |
| "pipediv2"; |
| |
| resets = <&gcc GCC_PCIE_5_PHY_BCR>, |
| <&gcc GCC_PCIE_5_NOCSR_COM_PHY_BCR>; |
| reset-names = "phy", |
| "phy_nocsr"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| power-domains = <&gcc GCC_PCIE_5_PHY_GDSC>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie5_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie6: pci@1c00000 { |
| device_type = "pci"; |
| compatible = "qcom,glymur-pcie", "qcom,pcie-x1e80100"; |
| reg = <0x0 0x01c00000 0x0 0x3000>, |
| <0x0 0x7e000000 0x0 0xf20>, |
| <0x0 0x7e000f40 0x0 0xa8>, |
| <0x0 0x7e001000 0x0 0x4000>, |
| <0x0 0x7e100000 0x0 0x100000>, |
| <0x0 0x01c03000 0x0 0x1000>; |
| reg-names = "parf", |
| "dbi", |
| "elbi", |
| "atu", |
| "config", |
| "mhi"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x7e200000 0x0 0x100000>, |
| <0x02000000 0x0 0x7e300000 0x0 0x7e300000 0x0 0x1d00000>, |
| <0x03000000 0x7 0xe0000000 0x7 0xe0000000 0x0 0x20000000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <6>; |
| num-lanes = <2>; |
| |
| operating-points-v2 = <&pcie6_opp_table>; |
| |
| msi-map = <0x0 &gic_its 0xe0000 0x10000>; |
| iommu-map = <0x0 &pcie_smmu 0x60000 0x10000>; |
| |
| interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", |
| "msi1", |
| "msi2", |
| "msi3", |
| "msi4", |
| "msi5", |
| "msi6", |
| "msi7", |
| "global"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 0 472 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 0 473 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 0 474 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 0 475 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_6_AUX_CLK>, |
| <&gcc GCC_PCIE_6_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_6_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_6_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_6_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_6_WEST_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "noc_aggr"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_6_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&pcie_west_anoc MASTER_PCIE_6 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &pcie_west_slv_noc SLAVE_PCIE_6 QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "pcie-mem", |
| "cpu-pcie"; |
| |
| resets = <&gcc GCC_PCIE_6_BCR>, |
| <&gcc GCC_PCIE_6_LINK_DOWN_BCR>; |
| reset-names = "pci", |
| "link_down"; |
| |
| power-domains = <&gcc GCC_PCIE_6_GDSC>; |
| |
| eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; |
| eq-presets-16gts = /bits/ 8 <0x55 0x55>; |
| |
| status = "disabled"; |
| |
| pcie6_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| /* GEN 1 x1 */ |
| opp-2500000-1 { |
| opp-hz = /bits/ 64 <2500000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <250000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 1 x2 */ |
| opp-5000000-1 { |
| opp-hz = /bits/ 64 <5000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <500000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 2 x1 */ |
| opp-5000000-2 { |
| opp-hz = /bits/ 64 <5000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <500000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 2 x2 */ |
| opp-10000000-2 { |
| opp-hz = /bits/ 64 <10000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1000000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 3 x1 */ |
| opp-8000000-3 { |
| opp-hz = /bits/ 64 <8000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <984500 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 3 x2 */ |
| opp-16000000-3 { |
| opp-hz = /bits/ 64 <16000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1969000 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 4 x1 */ |
| opp-16000000-4 { |
| opp-hz = /bits/ 64 <16000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1969000 1>; |
| opp-level = <4>; |
| }; |
| |
| /* GEN 4 x2 */ |
| opp-32000000-4 { |
| opp-hz = /bits/ 64 <32000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <3938000 1>; |
| opp-level = <4>; |
| }; |
| |
| }; |
| |
| pcie6_port0: pcie@0 { |
| device_type = "pci"; |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| bus-range = <0x01 0xff>; |
| |
| phys = <&pcie6_phy>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| }; |
| }; |
| |
| pcie6_phy: phy@1c06000 { |
| compatible = "qcom,glymur-qmp-gen4x2-pcie-phy"; |
| reg = <0x0 0x01c06000 0x0 0x2000>; |
| |
| clocks = <&gcc GCC_PCIE_PHY_6_AUX_CLK>, |
| <&gcc GCC_PCIE_6_CFG_AHB_CLK>, |
| <&tcsr TCSR_PCIE_4_CLKREF_EN>, |
| <&gcc GCC_PCIE_6_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_6_PIPE_CLK>, |
| <&gcc GCC_PCIE_6_PIPE_DIV2_CLK>; |
| clock-names = "aux", |
| "cfg_ahb", |
| "ref", |
| "rchng", |
| "pipe", |
| "pipediv2"; |
| |
| resets = <&gcc GCC_PCIE_6_PHY_BCR>, |
| <&gcc GCC_PCIE_6_NOCSR_COM_PHY_BCR>; |
| reset-names = "phy", |
| "phy_nocsr"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_6_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie6_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| pcie3b: pci@1b80000 { |
| device_type = "pci"; |
| compatible = "qcom,glymur-pcie", "qcom,pcie-x1e80100"; |
| reg = <0x0 0x01b80000 0x0 0x3000>, |
| <0x0 0x74000000 0x0 0xf20>, |
| <0x0 0x74000f40 0x0 0xa8>, |
| <0x0 0x74001000 0x0 0x4000>, |
| <0x0 0x74100000 0x0 0x100000>, |
| <0x0 0x01b83000 0x0 0x1000>; |
| reg-names = "parf", |
| "dbi", |
| "elbi", |
| "atu", |
| "config", |
| "mhi"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges = <0x01000000 0x0 0x00000000 0x0 0x74200000 0x0 0x100000>, |
| <0x02000000 0x0 0x74300000 0x0 0x74300000 0x0 0x3d00000>, |
| <0x03000000 0x7 0x40000000 0x7 0x40000000 0x0 0x40000000>; |
| bus-range = <0x00 0xff>; |
| |
| dma-coherent; |
| |
| linux,pci-domain = <7>; |
| num-lanes = <4>; |
| |
| operating-points-v2 = <&pcie3b_opp_table>; |
| |
| msi-map = <0x0 &gic_its 0xf0000 0x10000>; |
| iommu-map = <0x0 &pcie_smmu 0x70000 0x10000>; |
| |
| interrupts = <GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 943 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi0", |
| "msi1", |
| "msi2", |
| "msi3", |
| "msi4", |
| "msi5", |
| "msi6", |
| "msi7", |
| "global"; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 0 0 831 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 0 0 832 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 0 0 833 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 0 0 834 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_3B_AUX_CLK>, |
| <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_3B_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_3B_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_3B_SLV_Q2A_AXI_CLK>, |
| <&gcc GCC_AGGRE_NOC_PCIE_3B_WEST_SF_AXI_CLK>; |
| clock-names = "aux", |
| "cfg", |
| "bus_master", |
| "bus_slave", |
| "slave_q2a", |
| "noc_aggr"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_3B_AUX_CLK>; |
| assigned-clock-rates = <19200000>; |
| |
| interconnects = <&pcie_west_anoc MASTER_PCIE_3B QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS |
| &pcie_west_slv_noc SLAVE_PCIE_3B QCOM_ICC_TAG_ALWAYS>; |
| interconnect-names = "pcie-mem", |
| "cpu-pcie"; |
| |
| resets = <&gcc GCC_PCIE_3B_BCR>, |
| <&gcc GCC_PCIE_3B_LINK_DOWN_BCR>; |
| reset-names = "pci", |
| "link_down"; |
| |
| power-domains = <&gcc GCC_PCIE_3B_GDSC>; |
| |
| eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; |
| eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; |
| eq-presets-32gts = /bits/ 8 <0x55 0x55 0x55 0x55>; |
| |
| status = "disabled"; |
| |
| pcie3b_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| /* GEN 1 x1 */ |
| opp-2500000-1 { |
| opp-hz = /bits/ 64 <2500000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <250000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 1 x2 */ |
| opp-5000000-1 { |
| opp-hz = /bits/ 64 <5000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <500000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 1 x4 */ |
| opp-10000000-1 { |
| opp-hz = /bits/ 64 <10000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1000000 1>; |
| opp-level = <1>; |
| }; |
| |
| /* GEN 2 x1 */ |
| opp-5000000-2 { |
| opp-hz = /bits/ 64 <5000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <500000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 2 x2 */ |
| opp-10000000-2 { |
| opp-hz = /bits/ 64 <10000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1000000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 2 x4 */ |
| opp-20000000-2 { |
| opp-hz = /bits/ 64 <20000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <2000000 1>; |
| opp-level = <2>; |
| }; |
| |
| /* GEN 3 x1 */ |
| opp-8000000-3 { |
| opp-hz = /bits/ 64 <8000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <984500 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 3 x2 */ |
| opp-16000000-3 { |
| opp-hz = /bits/ 64 <16000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <1969000 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 3 x4 */ |
| opp-32000000-3 { |
| opp-hz = /bits/ 64 <32000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| opp-peak-kBps = <3938000 1>; |
| opp-level = <3>; |
| }; |
| |
| /* GEN 4 x1 */ |
| opp-16000000-4 { |
| opp-hz = /bits/ 64 <16000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| opp-peak-kBps = <1969000 1>; |
| opp-level = <4>; |
| }; |
| |
| /* GEN 4 x2 */ |
| opp-32000000-4 { |
| opp-hz = /bits/ 64 <32000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| opp-peak-kBps = <3938000 1>; |
| opp-level = <4>; |
| }; |
| |
| /* GEN 4 x4 */ |
| opp-64000000-4 { |
| opp-hz = /bits/ 64 <64000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| opp-peak-kBps = <7876000 1>; |
| opp-level = <4>; |
| }; |
| |
| /* GEN 5 x1 */ |
| opp-32000000-5 { |
| opp-hz = /bits/ 64 <32000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| opp-peak-kBps = <3938000 1>; |
| opp-level = <5>; |
| }; |
| |
| /* GEN 5 x2 */ |
| opp-64000000-5 { |
| opp-hz = /bits/ 64 <64000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| opp-peak-kBps = <7876000 1>; |
| opp-level = <5>; |
| }; |
| |
| /* GEN 5 x4 */ |
| opp-128000000-5 { |
| opp-hz = /bits/ 64 <128000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| opp-peak-kBps = <15753000 1>; |
| opp-level = <5>; |
| }; |
| }; |
| |
| pcie3b_port0: pcie@0 { |
| device_type = "pci"; |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| bus-range = <0x01 0xff>; |
| |
| phys = <&pcie3b_phy>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| ranges; |
| }; |
| }; |
| |
| pcie3b_phy: phy@f10000 { |
| compatible = "qcom,glymur-qmp-gen5x4-pcie-phy"; |
| reg = <0x0 0x00f10000 0x0 0x10000>; |
| |
| clocks = <&gcc GCC_PCIE_PHY_3B_AUX_CLK>, |
| <&gcc GCC_PCIE_3B_CFG_AHB_CLK>, |
| <&tcsr TCSR_PCIE_3_CLKREF_EN>, |
| <&gcc GCC_PCIE_3B_PHY_RCHNG_CLK>, |
| <&gcc GCC_PCIE_3B_PIPE_CLK>, |
| <&gcc GCC_PCIE_3B_PIPE_DIV2_CLK>; |
| clock-names = "aux", |
| "cfg_ahb", |
| "ref", |
| "rchng", |
| "pipe", |
| "pipediv2"; |
| |
| resets = <&gcc GCC_PCIE_3B_PHY_BCR>, |
| <&gcc GCC_PCIE_3B_NOCSR_COM_PHY_BCR>; |
| reset-names = "phy", |
| "phy_nocsr"; |
| |
| assigned-clocks = <&gcc GCC_PCIE_3B_PHY_RCHNG_CLK>; |
| assigned-clock-rates = <100000000>; |
| |
| power-domains = <&gcc GCC_PCIE_3B_PHY_GDSC>; |
| |
| #clock-cells = <0>; |
| clock-output-names = "pcie3b_pipe_clk"; |
| |
| #phy-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| tcsr_mutex: hwlock@1f40000 { |
| compatible = "qcom,tcsr-mutex"; |
| reg = <0x0 0x01f40000 0x0 0x20000>; |
| |
| #hwlock-cells = <1>; |
| }; |
| |
| tcsr: clock-controller@1fd5000 { |
| compatible = "qcom,glymur-tcsr", |
| "syscon"; |
| reg = <0x0 0x1fd5000 0x0 0x21000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| hsc_noc: interconnect@2000000 { |
| compatible = "qcom,glymur-hscnoc"; |
| reg = <0x0 0x02000000 0x0 0x93a080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| ipcc: mailbox@3e04000 { |
| compatible = "qcom,glymur-ipcc", "qcom,ipcc"; |
| reg = <0x0 0x03e04000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| |
| #mbox-cells = <2>; |
| }; |
| |
| lpass_lpiaon_noc: interconnect@7400000 { |
| compatible = "qcom,glymur-lpass-lpiaon-noc"; |
| reg = <0x0 0x07400000 0x0 0x19080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| lpass_lpicx_noc: interconnect@7420000 { |
| compatible = "qcom,glymur-lpass-lpicx-noc"; |
| reg = <0x0 0x07420000 0x0 0x44080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| lpass_ag_noc: interconnect@7e40000 { |
| compatible = "qcom,glymur-lpass-ag-noc"; |
| reg = <0x0 0x07e40000 0x0 0xe080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| usb_2_hsphy: phy@88e0000 { |
| compatible = "qcom,glymur-m31-eusb2-phy", |
| "qcom,sm8750-m31-eusb2-phy"; |
| |
| reg = <0x0 0x088e0000 0x0 0x29c>; |
| #phy-cells = <0>; |
| |
| clocks = <&tcsr TCSR_USB2_4_CLKREF_EN>; |
| clock-names = "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_TERT_BCR>; |
| |
| status = "disabled"; |
| }; |
| |
| usb_2_qmpphy: phy@88e1000 { |
| compatible = "qcom,glymur-qmp-usb3-dp-phy"; |
| reg = <0x0 0x088e1000 0x0 0x8000>; |
| |
| clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>, |
| <&rpmhcc RPMH_CXO_CLK>, |
| <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>, |
| <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>, |
| <&tcsr TCSR_USB4_2_CLKREF_EN>; |
| clock-names = "aux", |
| "ref", |
| "com_aux", |
| "usb3_pipe", |
| "clkref"; |
| |
| power-domains = <&gcc GCC_USB_2_PHY_GDSC>; |
| |
| resets = <&gcc GCC_USB3_PHY_TERT_BCR>, |
| <&gcc GCC_USB3PHY_PHY_TERT_BCR>; |
| reset-names = "phy", |
| "common"; |
| |
| #clock-cells = <1>; |
| #phy-cells = <1>; |
| |
| mode-switch; |
| orientation-switch; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_2_qmpphy_out: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_2_qmpphy_usb_ss_in: endpoint { |
| remote-endpoint = <&usb_2_dwc3_ss>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| |
| usb_2_qmpphy_dp_in: endpoint { |
| remote-endpoint = <&mdss_dp2_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb_0: usb@a600000 { |
| compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3"; |
| reg = <0x0 0x0a600000 0x0 0xfc100>; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, |
| <&gcc GCC_USB30_PRIM_SLEEP_CLK>, |
| <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi", |
| "noc_aggr_north", |
| "noc_aggr_south"; |
| |
| interrupts-extended = <&intc GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 90 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 60 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 17 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "dwc_usb3", |
| "pwr_event", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| power-domains = <&gcc GCC_USB30_PRIM_GDSC>; |
| resets = <&gcc GCC_USB30_PRIM_BCR>; |
| |
| iommus = <&apps_smmu 0x1420 0x0>; |
| phys = <&usb_0_hsphy>, |
| <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>; |
| phy-names = "usb2-phy", |
| "usb3-phy"; |
| |
| snps,hird-threshold = /bits/ 8 <0x0>; |
| snps,dis-u1-entry-quirk; |
| snps,dis-u2-entry-quirk; |
| snps,is-utmi-l1-suspend; |
| snps,usb3_lpm_capable; |
| snps,has-lpm-erratum; |
| tx-fifo-resize; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| |
| usb-role-switch; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_0_dwc3_hs: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_0_dwc3_ss: endpoint { |
| remote-endpoint = <&usb_0_qmpphy_usb_ss_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb_1: usb@a800000 { |
| compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3"; |
| reg = <0x0 0x0a800000 0x0 0xfc100>; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, |
| <&gcc GCC_USB30_SEC_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, |
| <&gcc GCC_USB30_SEC_SLEEP_CLK>, |
| <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi", |
| "noc_aggr_north", |
| "noc_aggr_south"; |
| |
| interrupts-extended = <&intc GIC_SPI 875 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 88 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 87 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 76 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "dwc_usb3", |
| "pwr_event", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| resets = <&gcc GCC_USB30_SEC_BCR>; |
| power-domains = <&gcc GCC_USB30_SEC_GDSC>; |
| |
| iommus = <&apps_smmu 0x1460 0x0>; |
| |
| phys = <&usb_1_hsphy>, |
| <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; |
| phy-names = "usb2-phy", |
| "usb3-phy"; |
| |
| snps,hird-threshold = /bits/ 8 <0x0>; |
| snps,dis-u1-entry-quirk; |
| snps,dis-u2-entry-quirk; |
| snps,is-utmi-l1-suspend; |
| snps,usb3_lpm_capable; |
| snps,has-lpm-erratum; |
| tx-fifo-resize; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_1_dwc3_hs: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_1_dwc3_ss: endpoint { |
| remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb_2: usb@a000000 { |
| compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3"; |
| reg = <0x0 0x0a000000 0x0 0xfc100>; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>, |
| <&gcc GCC_USB30_TERT_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>, |
| <&gcc GCC_USB30_TERT_SLEEP_CLK>, |
| <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi", |
| "noc_aggr_north", |
| "noc_aggr_south"; |
| |
| interrupts-extended = <&intc GIC_SPI 871 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 89 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 81 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 75 IRQ_TYPE_EDGE_BOTH>; |
| interrupt-names = "dwc_usb3", |
| "pwr_event", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "ss_phy_irq"; |
| |
| resets = <&gcc GCC_USB30_TERT_BCR>; |
| power-domains = <&gcc GCC_USB30_TERT_GDSC>; |
| |
| iommus = <&apps_smmu 0x420 0x0>; |
| |
| phys = <&usb_2_hsphy>, |
| <&usb_2_qmpphy QMP_USB43DP_USB3_PHY>; |
| phy-names = "usb2-phy", |
| "usb3-phy"; |
| |
| snps,hird-threshold = /bits/ 8 <0x0>; |
| snps,dis-u1-entry-quirk; |
| snps,dis-u2-entry-quirk; |
| snps,is-utmi-l1-suspend; |
| snps,usb3_lpm_capable; |
| snps,has-lpm-erratum; |
| tx-fifo-resize; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| usb_2_dwc3_hs: endpoint { |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| usb_2_dwc3_ss: endpoint { |
| remote-endpoint = <&usb_2_qmpphy_usb_ss_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb_hs: usb@a2f8800 { |
| compatible = "qcom,glymur-dwc3", "qcom,snps-dwc3"; |
| reg = <0x0 0x0a200000 0x0 0xfc100>; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, |
| <&gcc GCC_USB20_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, |
| <&gcc GCC_USB20_SLEEP_CLK>, |
| <&gcc GCC_USB20_MOCK_UTMI_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi", |
| "noc_aggr_north", |
| "noc_aggr_south"; |
| |
| assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB20_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <200000000>; |
| |
| interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 92 IRQ_TYPE_EDGE_BOTH>, |
| <&pdc 57 IRQ_TYPE_EDGE_BOTH>, |
| <&intc GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "dwc_usb3", |
| "pwr_event", |
| "dp_hs_phy_irq", |
| "dm_hs_phy_irq", |
| "hs_phy_irq"; |
| |
| resets = <&gcc GCC_USB20_PRIM_BCR>; |
| |
| power-domains = <&gcc GCC_USB20_PRIM_GDSC>; |
| required-opps = <&rpmhpd_opp_nom>; |
| |
| iommus = <&apps_smmu 0x0ce0 0x0>; |
| |
| interconnects = <&aggre3_noc MASTER_USB2 QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| &config_noc SLAVE_USB2 QCOM_ICC_TAG_ACTIVE_ONLY>; |
| interconnect-names = "usb-ddr", |
| "apps-usb"; |
| |
| phys = <&usb_hs_phy>; |
| phy-names = "usb2-phy"; |
| |
| snps,hird-threshold = /bits/ 8 <0x0>; |
| snps,dis-u1-entry-quirk; |
| snps,dis-u2-entry-quirk; |
| snps,is-utmi-l1-suspend; |
| snps,usb3_lpm_capable; |
| snps,has-lpm-erratum; |
| tx-fifo-resize; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| |
| dr_mode = "host"; |
| |
| maximum-speed = "high-speed"; |
| |
| status = "disabled"; |
| }; |
| |
| usb_mp: usb@a400000 { |
| compatible = "qcom,glymur-dwc3-mp", "qcom,snps-dwc3"; |
| reg = <0x0 0x0a400000 0x0 0xfc100>; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, |
| <&gcc GCC_USB30_MP_MASTER_CLK>, |
| <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, |
| <&gcc GCC_USB30_MP_SLEEP_CLK>, |
| <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_AHB_CLK>, |
| <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>; |
| clock-names = "cfg_noc", |
| "core", |
| "iface", |
| "sleep", |
| "mock_utmi", |
| "noc_aggr_north", |
| "noc_aggr_south"; |
| |
| interrupts-extended = <&intc GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, |
| <&intc GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 12 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 11 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 14 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 13 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 78 IRQ_TYPE_LEVEL_HIGH>, |
| <&pdc 77 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "dwc_usb3", |
| "pwr_event_1", |
| "pwr_event_2", |
| "hs_phy_1", |
| "hs_phy_2", |
| "dp_hs_phy_1", |
| "dm_hs_phy_1", |
| "dp_hs_phy_2", |
| "dm_hs_phy_2", |
| "ss_phy_1", |
| "ss_phy_2"; |
| |
| resets = <&gcc GCC_USB30_MP_BCR>; |
| power-domains = <&gcc GCC_USB30_MP_GDSC>; |
| |
| iommus = <&apps_smmu 0xda0 0x0>; |
| |
| phys = <&usb_mp_hsphy0>, |
| <&usb_mp_qmpphy0>, |
| <&usb_mp_hsphy1>, |
| <&usb_mp_qmpphy1>; |
| phy-names = "usb2-0", |
| "usb3-0", |
| "usb2-1", |
| "usb3-1"; |
| |
| snps,hird-threshold = /bits/ 8 <0x0>; |
| snps,dis-u1-entry-quirk; |
| snps,dis-u2-entry-quirk; |
| snps,is-utmi-l1-suspend; |
| snps,usb3_lpm_capable; |
| snps,has-lpm-erratum; |
| tx-fifo-resize; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| |
| dr_mode = "host"; |
| |
| status = "disabled"; |
| }; |
| |
| mdss: display-subsystem@ae00000 { |
| compatible = "qcom,glymur-mdss"; |
| reg = <0x0 0x0ae00000 0x0 0x1000>; |
| reg-names = "mdss"; |
| |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>; |
| |
| resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; |
| |
| interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS |
| &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, |
| <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY |
| &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; |
| interconnect-names = "mdp0-mem", |
| "cpu-cfg"; |
| |
| power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; |
| |
| iommus = <&apps_smmu 0x1de0 0x2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| status = "disabled"; |
| |
| mdss_mdp: display-controller@ae01000 { |
| compatible = "qcom,glymur-dpu"; |
| reg = <0x0 0x0ae01000 0x0 0x93000>, |
| <0x0 0x0aeb0000 0x0 0x3000>; |
| reg-names = "mdp", |
| "vbif"; |
| |
| interrupts-extended = <&mdss 0>; |
| |
| clocks = <&gcc GCC_DISP_HF_AXI_CLK>, |
| <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, |
| <&dispcc DISP_CC_MDSS_MDP_CLK>, |
| <&dispcc DISP_CC_MDSS_VSYNC_CLK>; |
| clock-names = "nrt_bus", |
| "iface", |
| "lut", |
| "core", |
| "vsync"; |
| |
| operating-points-v2 = <&mdp_opp_table>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| dpu_intf0_out: endpoint { |
| remote-endpoint = <&mdss_dp0_in>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| |
| mdss_intf4_out: endpoint { |
| remote-endpoint = <&mdss_dp1_in>; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| |
| mdss_intf5_out: endpoint { |
| remote-endpoint = <&mdss_dp3_in>; |
| }; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| |
| mdss_intf6_out: endpoint { |
| remote-endpoint = <&mdss_dp2_in>; |
| }; |
| }; |
| }; |
| |
| mdp_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-156000000 { |
| opp-hz = /bits/ 64 <156000000>; |
| required-opps = <&rpmhpd_opp_low_svs_d1>; |
| }; |
| |
| opp-205000000 { |
| opp-hz = /bits/ 64 <205000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-337000000 { |
| opp-hz = /bits/ 64 <337000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-417000000 { |
| opp-hz = /bits/ 64 <417000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-532000000 { |
| opp-hz = /bits/ 64 <532000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| |
| opp-600000000 { |
| opp-hz = /bits/ 64 <600000000>; |
| required-opps = <&rpmhpd_opp_nom_l1>; |
| }; |
| |
| opp-660000000 { |
| opp-hz = /bits/ 64 <660000000>; |
| required-opps = <&rpmhpd_opp_turbo>; |
| }; |
| |
| opp-717000000 { |
| opp-hz = /bits/ 64 <717000000>; |
| required-opps = <&rpmhpd_opp_turbo_l1>; |
| }; |
| }; |
| }; |
| |
| mdss_dp0: displayport-controller@af54000 { |
| compatible = "qcom,glymur-dp"; |
| reg = <0x0 0xaf54000 0x0 0x200>, |
| <0x0 0xaf54200 0x0 0x200>, |
| <0x0 0xaf55000 0x0 0xc00>, |
| <0x0 0xaf56000 0x0 0x400>, |
| <0x0 0xaf57000 0x0 0x400>, |
| <0x0 0xaf58000 0x0 0x400>, |
| <0x0 0xaf59000 0x0 0x400>, |
| <0x0 0xaf5a000 0x0 0x600>, |
| <0x0 0xaf5b000 0x0 0x600>; |
| |
| interrupts-extended = <&mdss 12>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>; |
| clock-names = "core_iface", |
| "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel", |
| "stream_1_pixel"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>; |
| assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; |
| |
| operating-points-v2 = <&mdss_dp0_opp_table>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| |
| phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>; |
| phy-names = "dp"; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| mdss_dp0_in: endpoint { |
| remote-endpoint = <&dpu_intf0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss_dp0_out: endpoint { |
| remote-endpoint = <&usb_dp_qmpphy_dp_in>; |
| }; |
| }; |
| }; |
| |
| mdss_dp0_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| opp-270000000 { |
| opp-hz = /bits/ 64 <270000000>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| }; |
| |
| opp-540000000 { |
| opp-hz = /bits/ 64 <540000000>; |
| required-opps = <&rpmhpd_opp_svs>; |
| }; |
| |
| opp-675000000 { |
| opp-hz = /bits/ 64 <675000000>; |
| required-opps = <&rpmhpd_opp_svs_l1>; |
| }; |
| |
| opp-810000000 { |
| opp-hz = /bits/ 64 <810000000>; |
| required-opps = <&rpmhpd_opp_nom>; |
| }; |
| }; |
| }; |
| |
| mdss_dp1: displayport-controller@af5c000 { |
| compatible = "qcom,glymur-dp"; |
| reg = <0x0 0xaf5c000 0x0 0x200>, |
| <0x0 0xaf5c200 0x0 0x200>, |
| <0x0 0xaf5d000 0x0 0xc00>, |
| <0x0 0xaf5e000 0x0 0x400>, |
| <0x0 0xaf5f000 0x0 0x400>, |
| <0x0 0xaf60000 0x0 0x400>, |
| <0x0 0xaf61000 0x0 0x400>, |
| <0x0 0xaf62000 0x0 0x600>, |
| <0x0 0xaf63000 0x0 0x600>; |
| |
| interrupts-extended = <&mdss 13>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK>; |
| clock-names = "core_iface", |
| "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel", |
| "stream_1_pixel"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>; |
| assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; |
| |
| operating-points-v2 = <&mdss_dp0_opp_table>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| |
| phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; |
| phy-names = "dp"; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| mdss_dp1_in: endpoint { |
| remote-endpoint = <&mdss_intf4_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss_dp1_out: endpoint { |
| remote-endpoint = <&usb_1_qmpphy_dp_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| mdss_dp2: displayport-controller@af64000 { |
| compatible = "qcom,glymur-dp"; |
| reg = <0x0 0x0af64000 0x0 0x200>, |
| <0x0 0x0af64200 0x0 0x200>, |
| <0x0 0x0af65000 0x0 0xc00>, |
| <0x0 0x0af66000 0x0 0x400>, |
| <0x0 0x0af67000 0x0 0x400>, |
| <0x0 0x0af68000 0x0 0x400>, |
| <0x0 0x0af69000 0x0 0x400>, |
| <0x0 0x0af6a000 0x0 0x600>, |
| <0x0 0x0af6b000 0x0 0x600>; |
| |
| interrupts-extended = <&mdss 14>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK>; |
| clock-names = "core_iface", |
| "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel", |
| "stream_1_pixel"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>; |
| assigned-clock-parents = <&usb_2_qmpphy QMP_USB43DP_DP_LINK_CLK>, |
| <&usb_2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| <&usb_2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; |
| |
| operating-points-v2 = <&mdss_dp0_opp_table>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| |
| phys = <&usb_2_qmpphy QMP_USB43DP_DP_PHY>; |
| phy-names = "dp"; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| mdss_dp2_in: endpoint { |
| remote-endpoint = <&mdss_intf6_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss_dp2_out: endpoint { |
| remote-endpoint = <&usb_2_qmpphy_dp_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| mdss_dp3: displayport-controller@af6c000 { |
| compatible = "qcom,glymur-dp"; |
| reg = <0x0 0x0af6c000 0x0 0x200>, |
| <0x0 0x0af6c200 0x0 0x200>, |
| <0x0 0x0af6d000 0x0 0xc00>, |
| <0x0 0x0af6e000 0x0 0x400>, |
| <0x0 0x0af6f000 0x0 0x400>, |
| <0x0 0x0af70000 0x0 0x400>, |
| <0x0 0x0af71000 0x0 0x400>, |
| <0x0 0x0af72000 0x0 0x600>, |
| <0x0 0x0af73000 0x0 0x600>; |
| |
| interrupts-extended = <&mdss 15>; |
| |
| clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, |
| <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; |
| clock-names = "core_iface", |
| "core_aux", |
| "ctrl_link", |
| "ctrl_link_iface", |
| "stream_pixel"; |
| |
| assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, |
| <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; |
| assigned-clock-parents = <&mdss_dp3_phy 0>, |
| <&mdss_dp3_phy 1>; |
| |
| operating-points-v2 = <&mdss_dp0_opp_table>; |
| |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| |
| phys = <&mdss_dp3_phy>; |
| phy-names = "dp"; |
| |
| #sound-dai-cells = <0>; |
| |
| status = "disabled"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| mdss_dp3_in: endpoint { |
| remote-endpoint = <&mdss_intf5_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| mdss_dp3_out: endpoint { |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| dispcc: clock-controller@af00000 { |
| compatible = "qcom,glymur-dispcc"; |
| reg = <0x0 0x0af00000 0x0 0x20000>; |
| clocks = <&rpmhcc RPMH_CXO_CLK>, |
| <&sleep_clk>, |
| <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */ |
| <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */ |
| <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| <&usb_2_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp2 */ |
| <&usb_2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, |
| <&mdss_dp3_phy 0>, /* dp3 */ |
| <&mdss_dp3_phy 1>, |
| <0>, /* dsi0 */ |
| <0>, |
| <0>, /* dsi1 */ |
| <0>, |
| <0>, |
| <0>, |
| <0>, |
| <0>; |
| power-domains = <&rpmhpd RPMHPD_MMCX>; |
| required-opps = <&rpmhpd_opp_low_svs>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| }; |
| |
| pdc: interrupt-controller@b220000 { |
| compatible = "qcom,glymur-pdc", "qcom,pdc"; |
| reg = <0x0 0x0b220000 0x0 0x10000>; |
| qcom,pdc-ranges = <0 745 51>, |
| <51 527 47>, |
| <98 609 32>, |
| <130 717 12>, |
| <142 251 5>, |
| <147 796 16>, |
| <171 4104 36>; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&intc>; |
| interrupt-controller; |
| }; |
| |
| tsens0: thermal-sensor@c22c000 { |
| compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c22c000 0x0 0x1000>, |
| <0x0 0x0c222000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <13>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens1: thermal-sensor@c22d000 { |
| compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c22d000 0x0 0x1000>, |
| <0x0 0x0c223000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 862 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <9>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens2: thermal-sensor@c22e000 { |
| compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c22e000 0x0 0x1000>, |
| <0x0 0x0c224000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 863 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <13>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens3: thermal-sensor@c22f000 { |
| compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c22f000 0x0 0x1000>, |
| <0x0 0x0c225000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <8>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens4: thermal-sensor@c230000 { |
| compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c230000 0x0 0x1000>, |
| <0x0 0x0c226000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <13>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens5: thermal-sensor@c231000 { |
| compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c231000 0x0 0x1000>, |
| <0x0 0x0c227000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <8>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens6: thermal-sensor@c232000 { |
| compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c232000 0x0 0x1000>, |
| <0x0 0x0c228000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 815 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <13>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens7: thermal-sensor@c233000 { |
| compatible = "qcom,glymur-tsens", "qcom,tsens-v2"; |
| reg = <0x0 0x0c233000 0x0 0x1000>, |
| <0x0 0x0c229000 0x0 0x1000>; |
| |
| interrupts = <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", |
| "critical"; |
| |
| #qcom,sensors = <15>; |
| |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| aoss_qmp: power-management@c300000 { |
| compatible = "qcom,glymur-aoss-qmp", "qcom,aoss-qmp"; |
| reg = <0x0 0x0c300000 0x0 0x400>; |
| interrupt-parent = <&ipcc>; |
| interrupts-extended = <&ipcc IPCC_MPROC_AOP IPCC_MPROC_SIGNAL_GLINK_QMP |
| IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&ipcc IPCC_MPROC_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; |
| |
| #clock-cells = <0>; |
| }; |
| |
| sram@c30f000 { |
| compatible = "qcom,rpmh-stats"; |
| reg = <0x0 0x0c30f000 0x0 0x400>; |
| }; |
| |
| arbiter@c400000 { |
| compatible = "qcom,glymur-spmi-pmic-arb"; |
| reg = <0x0 0x0c400000 0x0 0x3000>, |
| <0x0 0x0c900000 0x0 0x400000>, |
| <0x0 0x0c4c0000 0x0 0x400000>, |
| <0x0 0x0c403000 0x0 0x8000>; |
| reg-names = "core", |
| "chnls", |
| "obsrvr", |
| "chnl_map"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| qcom,channel = <0>; |
| qcom,ee = <0>; |
| |
| spmi_bus0: spmi@c426000 { |
| reg = <0x0 0x0c426000 0x0 0x4000>, |
| <0x0 0x0c8c0000 0x0 0x10000>, |
| <0x0 0x0c42a000 0x0 0x8000>; |
| reg-names = "cnfg", |
| "intr", |
| "chnl_owner"; |
| interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "periph_irq"; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| |
| spmi_bus1: spmi@c437000 { |
| reg = <0x0 0x0c437000 0x0 0x4000>, |
| <0x0 0x0c8d0000 0x0 0x10000>, |
| <0x0 0x0c43b000 0x0 0x8000>; |
| reg-names = "cnfg", |
| "intr", |
| "chnl_owner"; |
| interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "periph_irq"; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| |
| spmi_bus2: spmi@c48000 { |
| reg = <0x0 0x0c448000 0x0 0x4000>, |
| <0x0 0x0c8e0000 0x0 0x10000>, |
| <0x0 0x0c44c000 0x0 0x8000>; |
| reg-names = "cnfg", |
| "intr", |
| "chnl_owner"; |
| interrupts-extended = <&pdc 72 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "periph_irq"; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| tlmm: pinctrl@f100000 { |
| compatible = "qcom,glymur-tlmm"; |
| reg = <0x0 0x0f100000 0x0 0xf00000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-ranges = <&tlmm 0 0 249>; |
| wakeup-parent = <&pdc>; |
| |
| qup_i2c0_data_clk: qup-i2c0-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio0", "gpio1"; |
| function = "qup0_se0"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c1_data_clk: qup-i2c1-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio4", "gpio5"; |
| function = "qup0_se1"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c2_data_clk: qup-i2c2-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio8", "gpio9"; |
| function = "qup0_se2"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c3_data_clk: qup-i2c3-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio12", "gpio13"; |
| function = "qup0_se3"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c4_data_clk: qup-i2c4-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio16", "gpio17"; |
| function = "qup0_se4"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c5_data_clk: qup-i2c5-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio20", "gpio21"; |
| function = "qup0_se5"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c6_data_clk: qup-i2c6-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio6", "gpio7"; |
| function = "qup0_se6"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c7_data_clk: qup-i2c7-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio14", "gpio15"; |
| function = "qup0_se7"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c8_data_clk: qup-i2c8-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio32", "gpio33"; |
| function = "qup1_se0"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c9_data_clk: qup-i2c9-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio36", "gpio37"; |
| function = "qup1_se1"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c10_data_clk: qup-i2c10-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio40", "gpio41"; |
| function = "qup1_se2"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c11_data_clk: qup-i2c11-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio44", "gpio45"; |
| function = "qup1_se3"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c12_data_clk: qup-i2c12-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio48", "gpio49"; |
| function = "qup1_se4"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c13_data_clk: qup-i2c13-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio52", "gpio53"; |
| function = "qup1_se5"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c14_data_clk: qup-i2c14-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio56", "gpio57"; |
| function = "qup1_se6"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c15_data_clk: qup-i2c15-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio54", "gpio55"; |
| function = "qup1_se7"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c16_data_clk: qup-i2c16-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio64", "gpio65"; |
| function = "qup2_se0"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c17_data_clk: qup-i2c17-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio68", "gpio69"; |
| function = "qup2_se1"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c18_data_clk: qup-i2c18-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio72", "gpio73"; |
| function = "qup2_se2"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c19_data_clk: qup-i2c19-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio76", "gpio77"; |
| function = "qup2_se3"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c20_data_clk: qup-i2c20-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio80", "gpio81"; |
| function = "qup2_se4"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c21_data_clk: qup-i2c21-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio84", "gpio85"; |
| function = "qup2_se5"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c22_data_clk: qup-i2c22-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio88", "gpio89"; |
| function = "qup2_se6"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_i2c23_data_clk: qup-i2c23-data-clk-state { |
| /* SDA, SCL */ |
| pins = "gpio80", "gpio81"; |
| function = "qup2_se7"; |
| drive-strength = <2>; |
| bias-pull-up = <2200>; |
| }; |
| |
| qup_spi0_cs: qup-spi0-cs-state { |
| pins = "gpio3"; |
| function = "qup0_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi0_data_clk: qup-spi0-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio0", "gpio1", "gpio2"; |
| function = "qup0_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi1_cs: qup-spi1-cs-state { |
| pins = "gpio7"; |
| function = "qup0_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi1_data_clk: qup-spi1-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio4", "gpio5", "gpio6"; |
| function = "qup0_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi2_cs: qup-spi2-cs-state { |
| pins = "gpio11"; |
| function = "qup0_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi2_data_clk: qup-spi2-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio8", "gpio9", "gpio10"; |
| function = "qup0_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi3_cs: qup-spi3-cs-state { |
| pins = "gpio15"; |
| function = "qup0_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi3_data_clk: qup-spi3-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio12", "gpio13", "gpio14"; |
| function = "qup0_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi4_cs: qup-spi4-cs-state { |
| pins = "gpio19"; |
| function = "qup0_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi4_data_clk: qup-spi4-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio16", "gpio17", "gpio18"; |
| function = "qup0_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi5_cs: qup-spi5-cs-state { |
| pins = "gpio23"; |
| function = "qup0_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi5_data_clk: qup-spi5-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio20", "gpio21", "gpio22"; |
| function = "qup0_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi6_cs: qup-spi6-cs-state { |
| pins = "gpio5"; |
| function = "qup0_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi6_data_clk: qup-spi6-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio6", "gpio7", "gpio4"; |
| function = "qup0_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi7_cs: qup-spi7-cs-state { |
| pins = "gpio13"; |
| function = "qup0_se7"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi7_data_clk: qup-spi7-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio14", "gpio15", "gpio12"; |
| function = "qup0_se7"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi8_cs: qup-spi8-cs-state { |
| pins = "gpio35"; |
| function = "qup1_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi8_data_clk: qup-spi8-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio32", "gpio33", "gpio34"; |
| function = "qup1_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi9_cs: qup-spi9-cs-state { |
| pins = "gpio39"; |
| function = "qup1_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi9_data_clk: qup-spi9-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio36", "gpio37", "gpio38"; |
| function = "qup1_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi10_cs: qup-spi10-cs-state { |
| pins = "gpio43"; |
| function = "qup1_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi10_data_clk: qup-spi10-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio40", "gpio41", "gpio42"; |
| function = "qup1_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi11_cs: qup-spi11-cs-state { |
| pins = "gpio47"; |
| function = "qup1_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi11_data_clk: qup-spi11-data-clk-state { |
| pins = "gpio44", "gpio45", "gpio46"; |
| function = "qup1_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi12_cs: qup-spi12-cs-state { |
| pins = "gpio51"; |
| function = "qup1_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi12_data_clk: qup-spi12-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio48", "gpio49", "gpio50"; |
| function = "qup1_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi13_cs: qup-spi13-cs-state { |
| pins = "gpio55"; |
| function = "qup1_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi13_data_clk: qup-spi13-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio52", "gpio53", "gpio54"; |
| function = "qup1_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi14_cs: qup-spi14-cs-state { |
| pins = "gpio59"; |
| function = "qup1_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi14_data_clk: qup-spi14-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio56", "gpio57", "gpio58"; |
| function = "qup1_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi15_cs: qup-spi15-cs-state { |
| pins = "gpio53"; |
| function = "qup1_se7"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi15_data_clk: qup-spi15-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio54", "gpio55", "gpio52"; |
| function = "qup1_se7"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi16_cs: qup-spi16-cs-state { |
| pins = "gpio67"; |
| function = "qup2_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi16_data_clk: qup-spi16-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio64", "gpio65", "gpio66"; |
| function = "qup2_se0"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi17_cs: qup-spi17-cs-state { |
| pins = "gpio71"; |
| function = "qup2_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi17_data_clk: qup-spi17-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio68", "gpio69", "gpio70"; |
| function = "qup2_se1"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi18_cs: qup-spi18-cs-state { |
| pins = "gpio75"; |
| function = "qup2_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi18_data_clk: qup-spi18-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio72", "gpio73", "gpio74"; |
| function = "qup2_se2"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi19_cs: qup-spi19-cs-state { |
| pins = "gpio79"; |
| function = "qup2_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi19_data_clk: qup-spi19-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio76", "gpio77", "gpio78"; |
| function = "qup2_se3"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi20_cs: qup-spi20-cs-state { |
| pins = "gpio83"; |
| function = "qup2_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi20_data_clk: qup-spi20-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio80", "gpio81", "gpio82"; |
| function = "qup2_se4"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi21_cs: qup-spi21-cs-state { |
| pins = "gpio87"; |
| function = "qup2_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi21_data_clk: qup-spi21-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio84", "gpio85", "gpio86"; |
| function = "qup2_se5"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi22_cs: qup-spi22-cs-state { |
| pins = "gpio91"; |
| function = "qup2_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi22_data_clk: qup-spi22-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio88", "gpio89", "gpio90"; |
| function = "qup2_se6"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi23_cs: qup-spi23-cs-state { |
| pins = "gpio83"; |
| function = "qup2_se7"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_spi23_data_clk: qup-spi23-data-clk-state { |
| /* MISO, MOSI, CLK */ |
| pins = "gpio80", "gpio81", "gpio82"; |
| function = "qup2_se7"; |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| qup_uart2_default: qup-uart2-default-state { |
| tx-pins { |
| pins = "gpio10"; |
| function = "qup0_se2"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| rx-pins { |
| pins = "gpio11"; |
| function = "qup0_se2"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| qup_uart14_default: qup-uart14-default-state { |
| cts-pins { |
| pins = "gpio56"; |
| function = "qup1_se6"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| rts-pins { |
| pins = "gpio57"; |
| function = "qup1_se6"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| tx-pins { |
| pins = "gpio58"; |
| function = "qup1_se6"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| rx-pins { |
| pins = "gpio59"; |
| function = "qup1_se6"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| qup_uart19_default: qup-uart19-default-state { |
| cts-pins { |
| pins = "gpio76"; |
| function = "qup2_se3"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| rts-pins { |
| pins = "gpio77"; |
| function = "qup2_se3"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| tx-pins { |
| pins = "gpio78"; |
| function = "qup2_se3"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| rx-pins { |
| pins = "gpio79"; |
| function = "qup2_se3"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| qup_uart21_default: qup-uart21-default-state { |
| tx-pins { |
| pins = "gpio86"; |
| function = "qup2_se5"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| rx-pins { |
| pins = "gpio87"; |
| function = "qup2_se5"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| qup_uart22_default: qup-uart22-default-state { |
| tx-pins { |
| pins = "gpio90"; |
| function = "qup2_se6"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| rx-pins { |
| pins = "gpio91"; |
| function = "qup2_se6"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| }; |
| |
| apps_smmu: iommu@15000000 { |
| compatible = "qcom,glymur-smmu-500", |
| "qcom,smmu-500", |
| "arm,mmu-500"; |
| reg = <0x0 0x15000000 0x0 0x100000>; |
| |
| #iommu-cells = <2>; |
| #global-interrupts = <1>; |
| |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 493 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>; |
| |
| dma-coherent; |
| }; |
| |
| pcie_smmu: iommu@15480000 { |
| compatible = "arm,smmu-v3"; |
| reg = <0x0 0x15480000 0x0 0x20000>; |
| interrupts = <GIC_SPI 964 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 962 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 960 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "eventq", "cmdq-sync", "gerror"; |
| dma-coherent; |
| #iommu-cells = <1>; |
| }; |
| |
| intc: interrupt-controller@17000000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x0 0x17000000 0x0 0x10000>, |
| <0x0 0x17080000 0x0 0x480000>; |
| |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| gic_its: msi-controller@17040000 { |
| compatible = "arm,gic-v3-its"; |
| reg = <0x0 0x17040000 0x0 0x40000>; |
| |
| msi-controller; |
| #msi-cells = <1>; |
| }; |
| }; |
| |
| watchdog@17600000 { |
| compatible = "qcom,apss-wdt-glymur", "qcom,kpss-wdt"; |
| reg = <0x0 0x17600000 0x0 0x1000>; |
| clocks = <&sleep_clk>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| pdp0_mbox: mailbox@17610000 { |
| compatible = "qcom,glymur-cpucp-mbox", "qcom,x1e80100-cpucp-mbox"; |
| reg = <0x0 0x17610000 0 0x8000>, <0 0x19980000 0 0x8000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| #mbox-cells = <1>; |
| }; |
| |
| timer@17810000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0 0x17810000 0x0 0x1000>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x0 0x0 0x20000000>; |
| |
| frame@17811000 { |
| reg = <0x0 0x17811000 0x1000>, |
| <0x0 0x17812000 0x1000>; |
| |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <0>; |
| }; |
| |
| frame@17813000 { |
| reg = <0x0 0x17813000 0x1000>; |
| |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@17815000 { |
| reg = <0x0 0x17815000 0x1000>; |
| |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@17817000 { |
| reg = <0x0 0x17817000 0x1000>; |
| |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <3>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@17819000 { |
| reg = <0x0 0x17819000 0x1000>; |
| |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <4>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@1781b000 { |
| reg = <0x0 0x1781b000 0x1000>; |
| |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <5>; |
| |
| status = "disabled"; |
| }; |
| |
| frame@1781d000 { |
| reg = <0x0 0x1781d000 0x1000>; |
| |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| |
| frame-number = <6>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| apps_rsc: rsc@18900000 { |
| compatible = "qcom,rpmh-rsc"; |
| label = "apps_rsc"; |
| reg = <0x0 0x18900000 0x0 0x10000>, |
| <0x0 0x18910000 0x0 0x10000>, |
| <0x0 0x18920000 0x0 0x10000>; |
| reg-names = "drv-0", |
| "drv-1", |
| "drv-2"; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,tcs-offset = <0xd00>; |
| qcom,drv-id = <2>; |
| qcom,tcs-config = <ACTIVE_TCS 2>, |
| <SLEEP_TCS 3>, |
| <WAKE_TCS 3>, |
| <CONTROL_TCS 0>; |
| power-domains = <&system_pd>; |
| |
| apps_bcm_voter: bcm-voter { |
| compatible = "qcom,bcm-voter"; |
| }; |
| |
| rpmhcc: clock-controller { |
| compatible = "qcom,glymur-rpmh-clk"; |
| |
| clocks = <&xo_board>; |
| clock-names = "xo"; |
| |
| #clock-cells = <1>; |
| }; |
| |
| rpmhpd: power-controller { |
| compatible = "qcom,glymur-rpmhpd"; |
| |
| operating-points-v2 = <&rpmhpd_opp_table>; |
| |
| #power-domain-cells = <1>; |
| |
| rpmhpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmhpd_opp_ret: opp-16 { |
| opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| rpmhpd_opp_min_svs: opp-48 { |
| opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; |
| }; |
| |
| rpmhpd_opp_low_svs_d2: opp-52 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; |
| }; |
| |
| rpmhpd_opp_low_svs_d1: opp-56 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; |
| }; |
| |
| rpmhpd_opp_low_svs_d0: opp-60 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; |
| }; |
| |
| rpmhpd_opp_low_svs: opp-64 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; |
| }; |
| |
| rpmhpd_opp_low_svs_l1: opp-80 { |
| opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; |
| }; |
| |
| rpmhpd_opp_svs: opp-128 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS>; |
| }; |
| |
| rpmhpd_opp_svs_l0: opp-144 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; |
| }; |
| |
| rpmhpd_opp_svs_l1: opp-192 { |
| opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; |
| }; |
| |
| rpmhpd_opp_nom: opp-256 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM>; |
| }; |
| |
| rpmhpd_opp_nom_l1: opp-320 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; |
| }; |
| |
| rpmhpd_opp_nom_l2: opp-336 { |
| opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; |
| }; |
| |
| rpmhpd_opp_turbo: opp-384 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; |
| }; |
| |
| rpmhpd_opp_turbo_l1: opp-416 { |
| opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; |
| }; |
| }; |
| }; |
| }; |
| |
| nsi_noc: interconnect@1d600000 { |
| compatible = "qcom,glymur-nsinoc"; |
| reg = <0x0 0x1d600000 0x0 0x14080>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| oobm_ss_noc: interconnect@1f300000 { |
| compatible = "qcom,glymur-oobm-ss-noc"; |
| reg = <0x0 0x1f300000 0x0 0x49a00>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| system-cache-controller@20400000 { |
| compatible = "qcom,glymur-llcc"; |
| reg = <0x0 0x21800000 0x0 0x100000>, |
| <0x0 0x21a00000 0x0 0x100000>, |
| <0x0 0x21c00000 0x0 0x100000>, |
| <0x0 0x21e00000 0x0 0x100000>, |
| <0x0 0x22800000 0x0 0x100000>, |
| <0x0 0x22a00000 0x0 0x100000>, |
| <0x0 0x22c00000 0x0 0x100000>, |
| <0x0 0x22e00000 0x0 0x100000>, |
| <0x0 0x23800000 0x0 0x100000>, |
| <0x0 0x23a00000 0x0 0x100000>, |
| <0x0 0x23c00000 0x0 0x100000>, |
| <0x0 0x23e00000 0x0 0x100000>, |
| <0x0 0x20400000 0x0 0x100000>, |
| <0x0 0x20600000 0x0 0x100000>; |
| reg-names = "llcc0_base", |
| "llcc1_base", |
| "llcc2_base", |
| "llcc3_base", |
| "llcc4_base", |
| "llcc5_base", |
| "llcc6_base", |
| "llcc7_base", |
| "llcc8_base", |
| "llcc9_base", |
| "llcc10_base", |
| "llcc11_base", |
| "llcc_broadcast_base", |
| "llcc_broadcast_and_base"; |
| |
| interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| nsp_noc: interconnect@320c0000 { |
| compatible = "qcom,glymur-nsp-noc"; |
| reg = <0x0 0x320c0000 0x0 0x21280>; |
| qcom,bcm-voters = <&apps_bcm_voter>; |
| #interconnect-cells = <2>; |
| }; |
| |
| imem: sram@81e08000 { |
| compatible = "mmio-sram"; |
| reg = <0x0 0x81e08600 0x0 0x300>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0x81e08600 0x300>; |
| |
| cpu_scp_lpri0: scp-sram-section@0 { |
| compatible = "arm,scmi-shmem"; |
| reg = <0x0 0x180>; |
| }; |
| |
| cpu_scp_lpri1: scp-sram-section@180 { |
| compatible = "arm,scmi-shmem"; |
| reg = <0x180 0x180>; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| thermal_zones: thermal-zones { |
| aoss-0-thermal { |
| thermal-sensors = <&tsens0 0>; |
| |
| trips { |
| aoss-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-0-0-thermal { |
| thermal-sensors = <&tsens0 1>; |
| |
| trips { |
| cpu-0-0-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-0-1-thermal { |
| thermal-sensors = <&tsens0 2>; |
| |
| trips { |
| cpu-0-0-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-1-0-thermal { |
| thermal-sensors = <&tsens0 3>; |
| |
| trips { |
| cpu-0-1-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-1-1-thermal { |
| thermal-sensors = <&tsens0 4>; |
| |
| trips { |
| cpu-0-1-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-2-0-thermal { |
| thermal-sensors = <&tsens0 5>; |
| |
| trips { |
| cpu-0-2-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-2-1-thermal { |
| thermal-sensors = <&tsens0 6>; |
| |
| trips { |
| cpu-0-2-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-3-0-thermal { |
| thermal-sensors = <&tsens0 7>; |
| |
| trips { |
| cpu-0-3-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-3-1-thermal { |
| thermal-sensors = <&tsens0 8>; |
| |
| trips { |
| cpu-0-3-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-4-0-thermal { |
| thermal-sensors = <&tsens0 9>; |
| |
| trips { |
| cpu-0-4-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-4-1-thermal { |
| thermal-sensors = <&tsens0 10>; |
| |
| trips { |
| cpu-0-4-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-5-0-thermal { |
| thermal-sensors = <&tsens0 11>; |
| |
| trips { |
| cpu-0-5-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-0-5-1-thermal { |
| thermal-sensors = <&tsens0 12>; |
| |
| trips { |
| cpu-0-5-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| aoss-1-thermal { |
| thermal-sensors = <&tsens1 0>; |
| |
| trips { |
| aoss-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpullc-0-0-thermal { |
| thermal-sensors = <&tsens1 1>; |
| |
| trips { |
| cpullc-0-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpullc-0-1-thermal { |
| thermal-sensors = <&tsens1 2>; |
| |
| trips { |
| cpullc-0-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| qmx-0-0-thermal { |
| thermal-sensors = <&tsens1 3>; |
| |
| trips { |
| qmx-0-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| qmx-0-1-thermal { |
| thermal-sensors = <&tsens1 4>; |
| |
| trips { |
| qmx-0-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| qmx-0-2-thermal { |
| thermal-sensors = <&tsens1 5>; |
| |
| trips { |
| qmx-0-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| ddr-0-thermal { |
| thermal-sensors = <&tsens1 6>; |
| |
| trips { |
| ddr-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_video_0: video-0-thermal { |
| thermal-sensors = <&tsens1 7>; |
| |
| trips { |
| video-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_video_1: video-1-thermal { |
| thermal-sensors = <&tsens1 8>; |
| |
| trips { |
| video-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| aoss-2-thermal { |
| thermal-sensors = <&tsens2 0>; |
| |
| trips { |
| aoss-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-0-0-thermal { |
| thermal-sensors = <&tsens2 1>; |
| |
| trips { |
| cpu-1-0-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-0-1-thermal { |
| thermal-sensors = <&tsens2 2>; |
| |
| trips { |
| cpu-1-0-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-1-0-thermal { |
| thermal-sensors = <&tsens2 3>; |
| |
| trips { |
| cpu-1-1-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-1-1-thermal { |
| thermal-sensors = <&tsens2 4>; |
| |
| trips { |
| cpu-1-1-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-2-0-thermal { |
| thermal-sensors = <&tsens2 5>; |
| |
| trips { |
| cpu-1-2-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-2-1-thermal { |
| thermal-sensors = <&tsens2 6>; |
| |
| trips { |
| cpu-1-2-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-3-0-thermal { |
| thermal-sensors = <&tsens2 7>; |
| |
| trips { |
| cpu-1-3-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-3-1-thermal { |
| thermal-sensors = <&tsens2 8>; |
| |
| trips { |
| cpu-1-3-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-4-0-thermal { |
| thermal-sensors = <&tsens2 9>; |
| |
| trips { |
| cpu-1-4-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-4-1-thermal { |
| thermal-sensors = <&tsens2 10>; |
| |
| trips { |
| cpu-1-4-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-5-0-thermal { |
| thermal-sensors = <&tsens2 11>; |
| |
| trips { |
| cpu-1-5-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu-1-5-1-thermal { |
| thermal-sensors = <&tsens2 12>; |
| |
| trips { |
| cpu-1-5-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| aoss-3-thermal { |
| thermal-sensors = <&tsens3 0>; |
| |
| trips { |
| aoss-3-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpullc-1-0-thermal { |
| thermal-sensors = <&tsens3 1>; |
| |
| trips { |
| cpullc-1-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpullc-1-1-thermal { |
| thermal-sensors = <&tsens3 2>; |
| |
| trips { |
| cpullc-1-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| qmx-1-0-thermal { |
| thermal-sensors = <&tsens3 3>; |
| |
| trips { |
| qmx-1-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| qmx-1-1-thermal { |
| thermal-sensors = <&tsens3 4>; |
| |
| trips { |
| qmx-1-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| qmx-1-2-thermal { |
| thermal-sensors = <&tsens3 5>; |
| |
| trips { |
| qmx-1-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| qmx-1-3-thermal { |
| thermal-sensors = <&tsens3 6>; |
| |
| trips { |
| qmx-1-3-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| qmx-1-4-thermal { |
| thermal-sensors = <&tsens3 7>; |
| |
| trips { |
| qmx-1-4-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| aoss-4-thermal { |
| thermal-sensors = <&tsens4 0>; |
| |
| trips { |
| aoss-4-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_0_0: cpu-2-0-0-thermal { |
| thermal-sensors = <&tsens4 1>; |
| |
| trips { |
| cpu-2-0-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_0_1: cpu-2-0-1-thermal { |
| thermal-sensors = <&tsens4 2>; |
| |
| trips { |
| cpu-2-0-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_1_0: cpu-2-1-0-thermal { |
| thermal-sensors = <&tsens4 3>; |
| |
| trips { |
| cpu-2-1-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_1_1: cpu-2-1-1-thermal { |
| thermal-sensors = <&tsens4 4>; |
| |
| trips { |
| cpu-2-1-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_2_0: cpu-2-2-0-thermal { |
| thermal-sensors = <&tsens4 5>; |
| |
| trips { |
| cpu-2-2-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_2_1: cpu-2-2-1-thermal { |
| thermal-sensors = <&tsens4 6>; |
| |
| trips { |
| cpu-2-2-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_3_0: cpu-2-3-0-thermal { |
| thermal-sensors = <&tsens4 7>; |
| |
| trips { |
| cpu-2-3-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_3_1: cpu-2-3-1-thermal { |
| thermal-sensors = <&tsens4 8>; |
| |
| trips { |
| cpu-2-3-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_4_0: cpu-2-4-0-thermal { |
| thermal-sensors = <&tsens4 9>; |
| |
| trips { |
| cpu-2-4-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_4_1: cpu-2-4-1-thermal { |
| thermal-sensors = <&tsens4 10>; |
| |
| trips { |
| cpu-2-4-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_5_0: cpu-2-5-0-thermal { |
| thermal-sensors = <&tsens4 11>; |
| |
| trips { |
| cpu-2-5-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpu_2_5_1: cpu-2-5-1-thermal { |
| thermal-sensors = <&tsens4 12>; |
| |
| trips { |
| cpu-2-5-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| aoss-5-thermal { |
| thermal-sensors = <&tsens5 0>; |
| |
| trips { |
| aoss-5-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpullc_2_0: cpullc-2-0-thermal { |
| thermal-sensors = <&tsens5 1>; |
| |
| trips { |
| cpullc-2-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_cpuillc_2_1: cpuillc-2-1-thermal { |
| thermal-sensors = <&tsens5 2>; |
| |
| trips { |
| cpullc-2-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_qmx_2_0: qmx-2-0-thermal { |
| thermal-sensors = <&tsens5 3>; |
| |
| trips { |
| qmx-2-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_qmx_2_1: qmx-2-1-thermal { |
| thermal-sensors = <&tsens5 4>; |
| |
| trips { |
| qmx-2-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_qmx_2_2: qmx-2-2-thermal { |
| thermal-sensors = <&tsens5 5>; |
| |
| trips { |
| qmx-2-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_qmx_2_3: qmx-2-3-thermal { |
| thermal-sensors = <&tsens5 6>; |
| |
| trips { |
| qmx-2-3-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_qmx_2_4: qmx-2-4-thermal { |
| thermal-sensors = <&tsens5 7>; |
| |
| trips { |
| qmx-2-4-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_aoss_6: aoss-6-thermal { |
| thermal-sensors = <&tsens6 0>; |
| |
| trips { |
| aoss-6-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_nsphvx_0: nsphvx-0-thermal { |
| thermal-sensors = <&tsens6 1>; |
| |
| trips { |
| nsphvx-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_nsphvx_1: nsphvx-1-thermal { |
| thermal-sensors = <&tsens6 2>; |
| |
| trips { |
| nsphvx-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_nsphvx_2: nsphvx-2-thermal { |
| thermal-sensors = <&tsens6 3>; |
| |
| trips { |
| nsphvx-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_nsphvx_3: nsphvx-3-thermal { |
| thermal-sensors = <&tsens6 4>; |
| |
| trips { |
| nsphvx-3-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_nsphmx_0: nsphmx-0-thermal { |
| thermal-sensors = <&tsens6 5>; |
| |
| trips { |
| nsphmx-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_nsphmx_1: nsphmx-1-thermal { |
| thermal-sensors = <&tsens6 6>; |
| |
| trips { |
| nsphmx-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_nsphmx_2: nsphmx-2-thermal { |
| thermal-sensors = <&tsens6 7>; |
| |
| trips { |
| nsphmx-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_nsphmx_3: nsphmx-3-thermal { |
| thermal-sensors = <&tsens6 8>; |
| |
| trips { |
| nsphmx-3-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_camera_0: camera-0-thermal { |
| thermal-sensors = <&tsens6 9>; |
| |
| trips { |
| camera-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_camera_1: camera-1-thermal { |
| thermal-sensors = <&tsens6 10>; |
| |
| trips { |
| camera-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_ddr_1: ddr-1-thermal { |
| thermal-sensors = <&tsens6 11>; |
| |
| trips { |
| ddr-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_ddr_2: ddr-2-thermal { |
| thermal-sensors = <&tsens6 12>; |
| |
| trips { |
| ddr-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_aoss_7: aoss-7-thermal { |
| thermal-sensors = <&tsens7 0>; |
| |
| trips { |
| aoss-7-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_0_0: gpu-0-0-thermal { |
| thermal-sensors = <&tsens7 1>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-0-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_0_1: gpu-0-1-thermal { |
| thermal-sensors = <&tsens7 2>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-0-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_0_2: gpu-0-2-thermal { |
| thermal-sensors = <&tsens7 3>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-0-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_1_0: gpu-1-0-thermal { |
| thermal-sensors = <&tsens7 4>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-1-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_1_1: gpu-1-1-thermal { |
| thermal-sensors = <&tsens7 5>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-1-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_1_2: gpu-1-2-thermal { |
| thermal-sensors = <&tsens7 6>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-1-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_2_0: gpu-2-0-thermal { |
| thermal-sensors = <&tsens7 7>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-2-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_2_1: gpu-2-1-thermal { |
| thermal-sensors = <&tsens7 8>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-2-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_2_2: gpu-2-2-thermal { |
| thermal-sensors = <&tsens7 9>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-2-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_3_0: gpu-3-0-thermal { |
| thermal-sensors = <&tsens7 10>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-3-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_3_1: gpu-3-1-thermal { |
| thermal-sensors = <&tsens7 11>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-3-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpu_3_2: gpu-3-2-thermal { |
| thermal-sensors = <&tsens7 12>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpu-3-2-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpuss_0: gpuss-0-thermal { |
| thermal-sensors = <&tsens7 13>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpuss-0-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| thermal_gpuss_1: gpuss-1-thermal { |
| thermal-sensors = <&tsens7 14>; |
| |
| trips { |
| trip-point0 { |
| temperature = <90000>; |
| hysteresis = <5000>; |
| type = "hot"; |
| }; |
| |
| gpuss-1-critical { |
| temperature = <115000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| }; |