| // SPDX-License-Identifier: BSD-3-Clause |
| |
| /dts-v1/; |
| |
| #define PMIV0104_SID 7 |
| |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| |
| #include "milos.dtsi" |
| #include "pm7550.dtsi" |
| #include "pm8550vs.dtsi" |
| #include "pmiv0104.dtsi" /* PMIV0102 */ |
| #include "pmk8550.dtsi" /* PMK7635 */ |
| #include "pmr735b.dtsi" |
| |
| / { |
| model = "Nothing Phone (3a)"; |
| compatible = "nothing,asteroids", "qcom,milos"; |
| chassis-type = "handset"; |
| |
| aliases { |
| serial0 = &uart5; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| pinctrl-0 = <&assist_default>, <&volume_up_default>; |
| pinctrl-names = "default"; |
| |
| key-assist { |
| gpios = <&tlmm 71 GPIO_ACTIVE_LOW>; |
| label = "Assistant"; |
| linux,code = <KEY_LEFTMETA>; |
| }; |
| |
| key-volume-up { |
| gpios = <&pm7550_gpios 6 GPIO_ACTIVE_LOW>; |
| label = "Volume Up"; |
| linux,code = <KEY_VOLUMEUP>; |
| }; |
| }; |
| |
| pmic-glink { |
| compatible = "qcom,milos-pmic-glink", |
| "qcom,sm8550-pmic-glink", |
| "qcom,pmic-glink"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| orientation-gpios = <&tlmm 131 GPIO_ACTIVE_HIGH>; |
| |
| connector@0 { |
| compatible = "usb-c-connector"; |
| reg = <0>; |
| |
| data-role = "dual"; |
| power-role = "dual"; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| pmic_glink_hs_in: endpoint { |
| remote-endpoint = <&usb_1_dwc3_hs>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| |
| pmic_glink_sbu: endpoint { |
| remote-endpoint = <&fsa4480_sbu_mux>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| vph_pwr: regulator-vph-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3700000>; |
| regulator-max-microvolt = <3700000>; |
| |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| ramoops@81f20000 { |
| compatible = "ramoops"; |
| reg = <0x0 0x81f20000 0x0 0x400000>; |
| console-size = <0x200000>; |
| mem-type = <2>; |
| pmsg-size = <0x200000>; |
| }; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators-0 { |
| compatible = "qcom,pm7550-rpmh-regulators"; |
| |
| vdd-l1-supply = <&vreg_s1b>; |
| vdd-l2-l3-supply = <&vreg_s3b>; |
| vdd-l4-l5-supply = <&vreg_s2b>; |
| vdd-l7-supply = <&vreg_s1b>; |
| vdd-l8-supply = <&vreg_s1b>; |
| vdd-l9-l10-supply = <&vreg_s1b>; |
| vdd-l11-supply = <&vreg_s1b>; |
| vdd-l12-l14-supply = <&vreg_bob>; |
| vdd-l13-l16-supply = <&vreg_bob>; |
| vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>; |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| vdd-bob-supply = <&vph_pwr>; |
| |
| qcom,pmic-id = "b"; |
| |
| vreg_s1b: smps1 { |
| regulator-name = "vreg_s1b"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2080000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s2b: smps2 { |
| regulator-name = "vreg_s2b"; |
| regulator-min-microvolt = <1256000>; |
| regulator-max-microvolt = <1408000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s3b: smps3 { |
| regulator-name = "vreg_s3b"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <1040000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s4b: smps4 { |
| regulator-name = "vreg_s4b"; |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1004000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l1b: ldo1 { |
| regulator-name = "vreg_l1b"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2b: ldo2 { |
| regulator-name = "vreg_l2b"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3b: ldo3 { |
| regulator-name = "vreg_l3b"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4b: ldo4 { |
| regulator-name = "vreg_l4b"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l5b: ldo5 { |
| regulator-name = "vreg_l5b"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7b: ldo7 { |
| regulator-name = "vreg_l7b"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8b: ldo8 { |
| regulator-name = "vreg_l8b"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9b: ldo9 { |
| regulator-name = "vreg_l9b"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l10b: ldo10 { |
| regulator-name = "vreg_l10b"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l11b: ldo11 { |
| regulator-name = "vreg_l11b"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l12b: ldo12 { |
| regulator-name = "vreg_l12b"; |
| regulator-min-microvolt = <2952000>; |
| regulator-max-microvolt = <2952000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l13b: ldo13 { |
| regulator-name = "vreg_l13b"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l14b: ldo14 { |
| regulator-name = "vreg_l14b"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l15b: ldo15 { |
| regulator-name = "vreg_l15b"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l16b: ldo16 { |
| regulator-name = "vreg_l16b"; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3008000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l17b: ldo17 { |
| regulator-name = "vreg_l17b"; |
| regulator-min-microvolt = <3104000>; |
| regulator-max-microvolt = <3104000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l18b: ldo18 { |
| regulator-name = "vreg_l18b"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l19b: ldo19 { |
| regulator-name = "vreg_l19b"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l20b: ldo20 { |
| regulator-name = "vreg_l20b"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l21b: ldo21 { |
| regulator-name = "vreg_l21b"; |
| regulator-min-microvolt = <1620000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l22b: ldo22 { |
| regulator-name = "vreg_l22b"; |
| regulator-min-microvolt = <3200000>; |
| regulator-max-microvolt = <3200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l23b: ldo23 { |
| regulator-name = "vreg_l23b"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_bob: bob { |
| regulator-name = "vreg_bob"; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-1 { |
| compatible = "qcom,pm8550vs-rpmh-regulators"; |
| |
| vdd-l1-supply = <&vreg_s3b>; |
| vdd-l2-supply = <&vreg_s3b>; |
| vdd-l3-supply = <&vreg_s3b>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| |
| qcom,pmic-id = "c"; |
| |
| vreg_s3c: smps3 { |
| regulator-name = "vreg_s3c"; |
| regulator-min-microvolt = <1010000>; |
| regulator-max-microvolt = <1120000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s4c: smps4 { |
| regulator-name = "vreg_s4c"; |
| regulator-min-microvolt = <352000>; |
| regulator-max-microvolt = <812000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s5c: smps5 { |
| regulator-name = "vreg_s5c"; |
| regulator-min-microvolt = <540000>; |
| regulator-max-microvolt = <884000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s6c: smps6 { |
| regulator-name = "vreg_s6c"; |
| regulator-min-microvolt = <352000>; |
| regulator-max-microvolt = <904000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l1c: ldo1 { |
| regulator-name = "vreg_l1c"; |
| regulator-min-microvolt = <320000>; |
| regulator-max-microvolt = <1004000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2c: ldo2 { |
| regulator-name = "vreg_l2c"; |
| regulator-min-microvolt = <320000>; |
| regulator-max-microvolt = <650000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3c: ldo3 { |
| regulator-name = "vreg_l3c"; |
| regulator-min-microvolt = <320000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-2 { |
| compatible = "qcom,pmr735b-rpmh-regulators"; |
| |
| vdd-l1-l2-supply = <&vreg_s3b>; |
| vdd-l3-supply = <&vreg_s3b>; |
| vdd-l4-supply = <&vreg_s1b>; |
| vdd-l5-supply = <&vreg_s2b>; |
| vdd-l7-l8-supply = <&vreg_s2b>; |
| vdd-l9-supply = <&vreg_s3b>; |
| vdd-l10-supply = <&vreg_s1b>; |
| vdd-l11-supply = <&vreg_s3b>; |
| vdd-l12-supply = <&vreg_s3b>; |
| |
| qcom,pmic-id = "f"; |
| |
| vreg_l1f: ldo1 { |
| regulator-name = "vreg_l1f"; |
| regulator-min-microvolt = <852000>; |
| regulator-max-microvolt = <950000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2f: ldo2 { |
| regulator-name = "vreg_l2f"; |
| regulator-min-microvolt = <751000>; |
| regulator-max-microvolt = <824000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3f: ldo3 { |
| regulator-name = "vreg_l3f"; |
| regulator-min-microvolt = <650000>; |
| regulator-max-microvolt = <880000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4f: ldo4 { |
| regulator-name = "vreg_l4f"; |
| regulator-min-microvolt = <1700000>; |
| regulator-max-microvolt = <1950000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l5f: ldo5 { |
| regulator-name = "vreg_l5f"; |
| regulator-min-microvolt = <1140000>; |
| regulator-max-microvolt = <1260000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7f: ldo7 { |
| regulator-name = "vreg_l7f"; |
| regulator-min-microvolt = <1080000>; |
| regulator-max-microvolt = <1350000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9f: ldo9 { |
| regulator-name = "vreg_l9f"; |
| regulator-min-microvolt = <870000>; |
| regulator-max-microvolt = <970000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l10f: ldo10 { |
| regulator-name = "vreg_l10f"; |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l11f: ldo11 { |
| regulator-name = "vreg_l11f"; |
| regulator-min-microvolt = <320000>; |
| regulator-max-microvolt = <864000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l12f: ldo12 { |
| regulator-name = "vreg_l12f"; |
| regulator-min-microvolt = <480000>; |
| regulator-max-microvolt = <884000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| }; |
| |
| &gcc { |
| protected-clocks = <GCC_PCIE_1_AUX_CLK>, <GCC_PCIE_1_AUX_CLK_SRC>, |
| <GCC_PCIE_1_CFG_AHB_CLK>, <GCC_PCIE_1_MSTR_AXI_CLK>, |
| <GCC_PCIE_1_PHY_RCHNG_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>, |
| <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>, |
| <GCC_PCIE_1_PIPE_DIV2_CLK>, <GCC_PCIE_1_PIPE_DIV2_CLK_SRC>, |
| <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>; |
| }; |
| |
| &i2c7 { |
| clock-frequency = <400000>; |
| |
| status = "okay"; |
| |
| led-controller@3a { |
| compatible = "awinic,aw20036"; |
| reg = <0x3a>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| enable-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; |
| |
| led@0 { |
| reg = <0x0>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <0>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@1 { |
| reg = <0x1>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <1>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@2 { |
| reg = <0x2>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <2>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@3 { |
| reg = <0x3>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <3>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@4 { |
| reg = <0x4>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <4>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@5 { |
| reg = <0x5>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <5>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@6 { |
| reg = <0x6>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <6>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@7 { |
| reg = <0x7>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-2"; |
| function-enumerator = <0>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@8 { |
| reg = <0x8>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <0>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@9 { |
| reg = <0x9>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <1>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@a { |
| reg = <0xa>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <2>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@b { |
| reg = <0xb>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <3>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@c { |
| reg = <0xc>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <7>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@d { |
| reg = <0xd>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <8>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@e { |
| reg = <0xe>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <9>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@f { |
| reg = <0xf>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <10>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@10 { |
| reg = <0x10>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <11>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@11 { |
| reg = <0x11>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <12>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@12 { |
| reg = <0x12>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <13>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@13 { |
| reg = <0x13>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-2"; |
| function-enumerator = <1>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@14 { |
| reg = <0x14>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-2"; |
| function-enumerator = <2>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@15 { |
| reg = <0x15>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <4>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@16 { |
| reg = <0x16>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <5>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@17 { |
| reg = <0x17>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <6>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@18 { |
| reg = <0x18>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <14>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@19 { |
| reg = <0x19>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <15>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@1a { |
| reg = <0x1a>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <16>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@1b { |
| reg = <0x1b>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <17>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@1c { |
| reg = <0x1c>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <18>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@1d { |
| reg = <0x1d>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-1"; |
| function-enumerator = <19>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@1e { |
| reg = <0x1e>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-2"; |
| function-enumerator = <3>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@1f { |
| reg = <0x1f>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-2"; |
| function-enumerator = <4>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@20 { |
| reg = <0x20>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <7>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@21 { |
| reg = <0x21>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <8>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@22 { |
| reg = <0x22>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <9>; |
| led-max-microamp = <6560>; |
| }; |
| |
| led@23 { |
| reg = <0x23>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = "glyph-3"; |
| function-enumerator = <10>; |
| led-max-microamp = <6560>; |
| }; |
| }; |
| |
| typec-mux@42 { |
| compatible = "fcs,fsa4480"; |
| reg = <0x42>; |
| |
| vcc-supply = <&vph_pwr>; |
| |
| mode-switch; |
| orientation-switch; |
| |
| port { |
| fsa4480_sbu_mux: endpoint { |
| remote-endpoint = <&pmic_glink_sbu>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pm7550_flash { |
| status = "okay"; |
| |
| led-0 { |
| function = LED_FUNCTION_FLASH; |
| color = <LED_COLOR_ID_WHITE>; |
| led-sources = <1>, <4>; |
| led-max-microamp = <350000>; |
| flash-max-microamp = <1500000>; |
| flash-max-timeout-us = <400000>; |
| }; |
| }; |
| |
| &pm7550_gpios { |
| volume_up_default: volume-up-default-state { |
| pins = "gpio6"; |
| function = PMIC_GPIO_FUNC_NORMAL; |
| power-source = <1>; |
| bias-pull-up; |
| }; |
| }; |
| |
| &pm8550vs_c { |
| status = "okay"; |
| }; |
| |
| &pmiv0104_eusb2_repeater { |
| vdd18-supply = <&vreg_l7b>; |
| vdd3-supply = <&vreg_l17b>; |
| |
| qcom,tune-res-fsdif = /bits/ 8 <0x5>; |
| qcom,tune-usb2-amplitude = /bits/ 8 <0x8>; |
| qcom,tune-usb2-disc-thres = /bits/ 8 <0x7>; |
| qcom,tune-usb2-preem = /bits/ 8 <0x6>; |
| }; |
| |
| &pon_pwrkey { |
| status = "okay"; |
| }; |
| |
| &pon_resin { |
| linux,code = <KEY_VOLUMEDOWN>; |
| |
| status = "okay"; |
| }; |
| |
| &qupv3_id_0 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_1 { |
| status = "okay"; |
| }; |
| |
| &remoteproc_adsp { |
| firmware-name = "qcom/milos/nothing/asteroids/adsp.mbn", |
| "qcom/milos/nothing/asteroids/adsp_dtb.mbn"; |
| |
| status = "okay"; |
| }; |
| |
| &remoteproc_cdsp { |
| firmware-name = "qcom/milos/nothing/asteroids/cdsp.mbn", |
| "qcom/milos/nothing/asteroids/cdsp_dtb.mbn"; |
| |
| status = "okay"; |
| }; |
| |
| &remoteproc_mpss { |
| firmware-name = "qcom/milos/nothing/asteroids/modem.mbn"; |
| |
| status = "okay"; |
| }; |
| |
| &remoteproc_wpss { |
| firmware-name = "qcom/milos/nothing/asteroids/wpss.mbn"; |
| |
| status = "okay"; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <13 1>, /* Display */ |
| <63 2>; /* WLAN UART */ |
| |
| assist_default: assist-default-state { |
| pins = "gpio71"; |
| function = "gpio"; |
| bias-pull-up; |
| }; |
| }; |
| |
| &trusted_apps_mem { |
| reg = <0x0 0xe9500000 0x0 0x5500000>; |
| }; |
| |
| /* |
| * UART_RX and UART_TX are routed to test points on board, not |
| * available over USB. |
| */ |
| &uart5 { |
| status = "okay"; |
| }; |
| |
| &usb_1 { |
| /* USB 2.0 only, HW does not support USB 3.x */ |
| qcom,select-utmi-as-pipe-clk; |
| |
| status = "okay"; |
| }; |
| |
| &usb_1_dwc3_hs { |
| remote-endpoint = <&pmic_glink_hs_in>; |
| }; |
| |
| &usb_1_hsphy { |
| vdd-supply = <&vreg_l2b>; |
| vdda12-supply = <&vreg_l4b>; |
| |
| phys = <&pmiv0104_eusb2_repeater>; |
| |
| status = "okay"; |
| }; |
