| // SPDX-License-Identifier: MIT | |
| /* | |
| * Copyright © 2014-2018 Intel Corporation | |
| */ | |
| #include <drm/intel/intel_gmd_misc_regs.h> | |
| #include "i915_drv.h" | |
| #include "i915_reg.h" | |
| #include "i915_mmio_range.h" | |
| #include "intel_context.h" | |
| #include "intel_engine_pm.h" | |
| #include "intel_engine_regs.h" | |
| #include "intel_gpu_commands.h" | |
| #include "intel_gt.h" | |
| #include "intel_gt_ccs_mode.h" | |
| #include "intel_gt_mcr.h" | |
| #include "intel_gt_print.h" | |
| #include "intel_gt_regs.h" | |
| #include "intel_ring.h" | |
| #include "intel_workarounds.h" | |
| #include "display/intel_fbc_regs.h" | |
| /** | |
| * DOC: Hardware workarounds | |
| * | |
| * Hardware workarounds are register programming documented to be executed in | |
| * the driver that fall outside of the normal programming sequences for a | |
| * platform. There are some basic categories of workarounds, depending on | |
| * how/when they are applied: | |
| * | |
| * - Context workarounds: workarounds that touch registers that are | |
| * saved/restored to/from the HW context image. The list is emitted (via Load | |
| * Register Immediate commands) once when initializing the device and saved in | |
| * the default context. That default context is then used on every context | |
| * creation to have a "primed golden context", i.e. a context image that | |
| * already contains the changes needed to all the registers. | |
| * | |
| * Context workarounds should be implemented in the \*_ctx_workarounds_init() | |
| * variants respective to the targeted platforms. | |
| * | |
| * - Engine workarounds: the list of these WAs is applied whenever the specific | |
| * engine is reset. It's also possible that a set of engine classes share a | |
| * common power domain and they are reset together. This happens on some | |
| * platforms with render and compute engines. In this case (at least) one of | |
| * them need to keeep the workaround programming: the approach taken in the | |
| * driver is to tie those workarounds to the first compute/render engine that | |
| * is registered. When executing with GuC submission, engine resets are | |
| * outside of kernel driver control, hence the list of registers involved in | |
| * written once, on engine initialization, and then passed to GuC, that | |
| * saves/restores their values before/after the reset takes place. See | |
| * ``drivers/gpu/drm/i915/gt/uc/intel_guc_ads.c`` for reference. | |
| * | |
| * Workarounds for registers specific to RCS and CCS should be implemented in | |
| * rcs_engine_wa_init() and ccs_engine_wa_init(), respectively; those for | |
| * registers belonging to BCS, VCS or VECS should be implemented in | |
| * xcs_engine_wa_init(). Workarounds for registers not belonging to a specific | |
| * engine's MMIO range but that are part of of the common RCS/CCS reset domain | |
| * should be implemented in general_render_compute_wa_init(). The settings | |
| * about the CCS load balancing should be added in ccs_engine_wa_mode(). | |
| * | |
| * - GT workarounds: the list of these WAs is applied whenever these registers | |
| * revert to their default values: on GPU reset, suspend/resume [1]_, etc. | |
| * | |
| * GT workarounds should be implemented in the \*_gt_workarounds_init() | |
| * variants respective to the targeted platforms. | |
| * | |
| * - Register whitelist: some workarounds need to be implemented in userspace, | |
| * but need to touch privileged registers. The whitelist in the kernel | |
| * instructs the hardware to allow the access to happen. From the kernel side, | |
| * this is just a special case of a MMIO workaround (as we write the list of | |
| * these to/be-whitelisted registers to some special HW registers). | |
| * | |
| * Register whitelisting should be done in the \*_whitelist_build() variants | |
| * respective to the targeted platforms. | |
| * | |
| * - Workaround batchbuffers: buffers that get executed automatically by the | |
| * hardware on every HW context restore. These buffers are created and | |
| * programmed in the default context so the hardware always go through those | |
| * programming sequences when switching contexts. The support for workaround | |
| * batchbuffers is enabled these hardware mechanisms: | |
| * | |
| * #. INDIRECT_CTX: A batchbuffer and an offset are provided in the default | |
| * context, pointing the hardware to jump to that location when that offset | |
| * is reached in the context restore. Workaround batchbuffer in the driver | |
| * currently uses this mechanism for all platforms. | |
| * | |
| * #. BB_PER_CTX_PTR: A batchbuffer is provided in the default context, | |
| * pointing the hardware to a buffer to continue executing after the | |
| * engine registers are restored in a context restore sequence. This is | |
| * currently not used in the driver. | |
| * | |
| * - Other: There are WAs that, due to their nature, cannot be applied from a | |
| * central place. Those are peppered around the rest of the code, as needed. | |
| * Workarounds related to the display IP are the main example. | |
| * | |
| * .. [1] Technically, some registers are powercontext saved & restored, so they | |
| * survive a suspend/resume. In practice, writing them again is not too | |
| * costly and simplifies things, so it's the approach taken in the driver. | |
| */ | |
| static void wa_init_start(struct i915_wa_list *wal, struct intel_gt *gt, | |
| const char *name, const char *engine_name) | |
| { | |
| wal->gt = gt; | |
| wal->name = name; | |
| wal->engine_name = engine_name; | |
| } | |
| #define WA_LIST_CHUNK (1 << 4) | |
| static void wa_init_finish(struct i915_wa_list *wal) | |
| { | |
| /* Trim unused entries. */ | |
| if (!IS_ALIGNED(wal->count, WA_LIST_CHUNK)) { | |
| struct i915_wa *list = kmemdup_array(wal->list, wal->count, | |
| sizeof(*list), GFP_KERNEL); | |
| if (list) { | |
| kfree(wal->list); | |
| wal->list = list; | |
| } | |
| } | |
| if (!wal->count) | |
| return; | |
| gt_dbg(wal->gt, "Initialized %u %s workarounds on %s\n", | |
| wal->wa_count, wal->name, wal->engine_name); | |
| } | |
| static enum forcewake_domains | |
| wal_get_fw_for_rmw(struct intel_uncore *uncore, const struct i915_wa_list *wal) | |
| { | |
| enum forcewake_domains fw = 0; | |
| struct i915_wa *wa; | |
| unsigned int i; | |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) | |
| fw |= intel_uncore_forcewake_for_reg(uncore, | |
| wa->reg, | |
| FW_REG_READ | | |
| FW_REG_WRITE); | |
| return fw; | |
| } | |
| static void _wa_add(struct i915_wa_list *wal, const struct i915_wa *wa) | |
| { | |
| unsigned int addr = i915_mmio_reg_offset(wa->reg); | |
| struct drm_i915_private *i915 = wal->gt->i915; | |
| unsigned int start = 0, end = wal->count; | |
| const unsigned int grow = WA_LIST_CHUNK; | |
| struct i915_wa *wa_; | |
| GEM_BUG_ON(!is_power_of_2(grow)); | |
| if (IS_ALIGNED(wal->count, grow)) { /* Either uninitialized or full. */ | |
| struct i915_wa *list; | |
| list = kmalloc_objs(*list, ALIGN(wal->count + 1, grow)); | |
| if (!list) { | |
| drm_err(&i915->drm, "No space for workaround init!\n"); | |
| return; | |
| } | |
| if (wal->list) { | |
| memcpy(list, wal->list, sizeof(*wa) * wal->count); | |
| kfree(wal->list); | |
| } | |
| wal->list = list; | |
| } | |
| while (start < end) { | |
| unsigned int mid = start + (end - start) / 2; | |
| if (i915_mmio_reg_offset(wal->list[mid].reg) < addr) { | |
| start = mid + 1; | |
| } else if (i915_mmio_reg_offset(wal->list[mid].reg) > addr) { | |
| end = mid; | |
| } else { | |
| wa_ = &wal->list[mid]; | |
| if ((wa->clr | wa_->clr) && !(wa->clr & ~wa_->clr)) { | |
| drm_err(&i915->drm, | |
| "Discarding overwritten w/a for reg %04x (clear: %08x, set: %08x)\n", | |
| i915_mmio_reg_offset(wa_->reg), | |
| wa_->clr, wa_->set); | |
| wa_->set &= ~wa->clr; | |
| } | |
| wal->wa_count++; | |
| wa_->set |= wa->set; | |
| wa_->clr |= wa->clr; | |
| wa_->read |= wa->read; | |
| return; | |
| } | |
| } | |
| wal->wa_count++; | |
| wa_ = &wal->list[wal->count++]; | |
| *wa_ = *wa; | |
| while (wa_-- > wal->list) { | |
| GEM_BUG_ON(i915_mmio_reg_offset(wa_[0].reg) == | |
| i915_mmio_reg_offset(wa_[1].reg)); | |
| if (i915_mmio_reg_offset(wa_[1].reg) > | |
| i915_mmio_reg_offset(wa_[0].reg)) | |
| break; | |
| swap(wa_[1], wa_[0]); | |
| } | |
| } | |
| static void wa_add(struct i915_wa_list *wal, i915_reg_t reg, | |
| u32 clear, u32 set, u32 read_mask, bool masked_reg) | |
| { | |
| struct i915_wa wa = { | |
| .reg = reg, | |
| .clr = clear, | |
| .set = set, | |
| .read = read_mask, | |
| .masked_reg = masked_reg, | |
| }; | |
| _wa_add(wal, &wa); | |
| } | |
| static void wa_mcr_add(struct i915_wa_list *wal, i915_mcr_reg_t reg, | |
| u32 clear, u32 set, u32 read_mask, bool masked_reg) | |
| { | |
| struct i915_wa wa = { | |
| .mcr_reg = reg, | |
| .clr = clear, | |
| .set = set, | |
| .read = read_mask, | |
| .masked_reg = masked_reg, | |
| .is_mcr = 1, | |
| }; | |
| _wa_add(wal, &wa); | |
| } | |
| static void | |
| wa_write_clr_set(struct i915_wa_list *wal, i915_reg_t reg, u32 clear, u32 set) | |
| { | |
| wa_add(wal, reg, clear, set, clear | set, false); | |
| } | |
| static void | |
| wa_mcr_write_clr_set(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 clear, u32 set) | |
| { | |
| wa_mcr_add(wal, reg, clear, set, clear | set, false); | |
| } | |
| static void | |
| wa_write(struct i915_wa_list *wal, i915_reg_t reg, u32 set) | |
| { | |
| wa_write_clr_set(wal, reg, ~0, set); | |
| } | |
| static void | |
| wa_write_or(struct i915_wa_list *wal, i915_reg_t reg, u32 set) | |
| { | |
| wa_write_clr_set(wal, reg, set, set); | |
| } | |
| static void | |
| wa_mcr_write_or(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 set) | |
| { | |
| wa_mcr_write_clr_set(wal, reg, set, set); | |
| } | |
| static void | |
| wa_write_clr(struct i915_wa_list *wal, i915_reg_t reg, u32 clr) | |
| { | |
| wa_write_clr_set(wal, reg, clr, 0); | |
| } | |
| static void | |
| wa_mcr_write_clr(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 clr) | |
| { | |
| wa_mcr_write_clr_set(wal, reg, clr, 0); | |
| } | |
| /* | |
| * WA operations on "masked register". A masked register has the upper 16 bits | |
| * documented as "masked" in b-spec. Its purpose is to allow writing to just a | |
| * portion of the register without a rmw: you simply write in the upper 16 bits | |
| * the mask of bits you are going to modify. | |
| * | |
| * The wa_masked_* family of functions already does the necessary operations to | |
| * calculate the mask based on the parameters passed, so user only has to | |
| * provide the lower 16 bits of that register. | |
| */ | |
| static void | |
| wa_masked_en(struct i915_wa_list *wal, i915_reg_t reg, u32 val) | |
| { | |
| wa_add(wal, reg, 0, REG_MASKED_FIELD_ENABLE(val), val, true); | |
| } | |
| static void | |
| wa_mcr_masked_en(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 val) | |
| { | |
| wa_mcr_add(wal, reg, 0, REG_MASKED_FIELD_ENABLE(val), val, true); | |
| } | |
| static void | |
| wa_masked_dis(struct i915_wa_list *wal, i915_reg_t reg, u32 val) | |
| { | |
| wa_add(wal, reg, 0, REG_MASKED_FIELD_DISABLE(val), val, true); | |
| } | |
| static void | |
| wa_mcr_masked_dis(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 val) | |
| { | |
| wa_mcr_add(wal, reg, 0, REG_MASKED_FIELD_DISABLE(val), val, true); | |
| } | |
| static void | |
| wa_masked_field_set(struct i915_wa_list *wal, i915_reg_t reg, | |
| u32 mask, u32 val) | |
| { | |
| wa_add(wal, reg, 0, REG_MASKED_FIELD(mask, val), mask, true); | |
| } | |
| static void | |
| wa_mcr_masked_field_set(struct i915_wa_list *wal, i915_mcr_reg_t reg, | |
| u32 mask, u32 val) | |
| { | |
| wa_mcr_add(wal, reg, 0, REG_MASKED_FIELD(mask, val), mask, true); | |
| } | |
| static void gen6_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| wa_masked_en(wal, INSTPM, INSTPM_FORCE_ORDERING); | |
| /* WaDisable_RenderCache_OperationalFlush:snb */ | |
| wa_masked_dis(wal, CACHE_MODE_0, RC_OP_FLUSH_ENABLE); | |
| } | |
| static void gen7_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| wa_masked_en(wal, INSTPM, INSTPM_FORCE_ORDERING); | |
| /* WaDisable_RenderCache_OperationalFlush:ivb,vlv,hsw */ | |
| wa_masked_dis(wal, CACHE_MODE_0_GEN7, RC_OP_FLUSH_ENABLE); | |
| /* | |
| * BSpec says this must be set, even though | |
| * WaDisable4x2SubspanOptimization:ivb,hsw | |
| * WaDisable4x2SubspanOptimization isn't listed for VLV. | |
| */ | |
| wa_masked_en(wal, | |
| CACHE_MODE_1, | |
| PIXEL_SUBSPAN_COLLECT_OPT_DISABLE); | |
| } | |
| static void gen8_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| wa_masked_en(wal, INSTPM, INSTPM_FORCE_ORDERING); | |
| /* WaDisableAsyncFlipPerfMode:bdw,chv */ | |
| wa_masked_en(wal, RING_MI_MODE(RENDER_RING_BASE), ASYNC_FLIP_PERF_DISABLE); | |
| /* WaDisablePartialInstShootdown:bdw,chv */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, | |
| PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE); | |
| /* Use Force Non-Coherent whenever executing a 3D context. This is a | |
| * workaround for a possible hang in the unlikely event a TLB | |
| * invalidation occurs during a PSD flush. | |
| */ | |
| /* WaForceEnableNonCoherent:bdw,chv */ | |
| /* WaHdcDisableFetchWhenMasked:bdw,chv */ | |
| wa_masked_en(wal, HDC_CHICKEN0, | |
| HDC_DONOT_FETCH_MEM_WHEN_MASKED | | |
| HDC_FORCE_NON_COHERENT); | |
| /* From the Haswell PRM, Command Reference: Registers, CACHE_MODE_0: | |
| * "The Hierarchical Z RAW Stall Optimization allows non-overlapping | |
| * polygons in the same 8x4 pixel/sample area to be processed without | |
| * stalling waiting for the earlier ones to write to Hierarchical Z | |
| * buffer." | |
| * | |
| * This optimization is off by default for BDW and CHV; turn it on. | |
| */ | |
| wa_masked_dis(wal, CACHE_MODE_0_GEN7, HIZ_RAW_STALL_OPT_DISABLE); | |
| /* Wa4x4STCOptimizationDisable:bdw,chv */ | |
| wa_masked_en(wal, CACHE_MODE_1, GEN8_4x4_STC_OPTIMIZATION_DISABLE); | |
| /* | |
| * BSpec recommends 8x4 when MSAA is used, | |
| * however in practice 16x4 seems fastest. | |
| * | |
| * Note that PS/WM thread counts depend on the WIZ hashing | |
| * disable bit, which we don't touch here, but it's good | |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). | |
| */ | |
| wa_masked_field_set(wal, GEN7_GT_MODE, | |
| GEN6_WIZ_HASHING_MASK, | |
| GEN6_WIZ_HASHING_16x4); | |
| } | |
| static void bdw_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| gen8_ctx_workarounds_init(engine, wal); | |
| /* WaDisableThreadStallDopClockGating:bdw (pre-production) */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, STALL_DOP_GATING_DISABLE); | |
| /* WaDisableDopClockGating:bdw | |
| * | |
| * Also see the related UCGTCL1 write in bdw_init_clock_gating() | |
| * to disable EUTC clock gating. | |
| */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN2, | |
| DOP_CLOCK_GATING_DISABLE); | |
| wa_mcr_masked_en(wal, GEN8_HALF_SLICE_CHICKEN3, | |
| GEN8_SAMPLER_POWER_BYPASS_DIS); | |
| wa_masked_en(wal, HDC_CHICKEN0, | |
| /* WaForceContextSaveRestoreNonCoherent:bdw */ | |
| HDC_FORCE_CONTEXT_SAVE_RESTORE_NON_COHERENT | | |
| /* WaDisableFenceDestinationToSLM:bdw (pre-prod) */ | |
| (INTEL_INFO(i915)->gt == 3 ? HDC_FENCE_DEST_SLM_DISABLE : 0)); | |
| } | |
| static void chv_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| gen8_ctx_workarounds_init(engine, wal); | |
| /* WaDisableThreadStallDopClockGating:chv */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, STALL_DOP_GATING_DISABLE); | |
| /* Improve HiZ throughput on CHV. */ | |
| wa_masked_en(wal, HIZ_CHICKEN, CHV_HZ_8X8_MODE_IN_1X); | |
| } | |
| static void gen9_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| if (HAS_LLC(i915)) { | |
| /* WaCompressedResourceSamplerPbeMediaNewHashMode:skl,kbl | |
| * | |
| * Must match Display Engine. See | |
| * WaCompressedResourceDisplayNewHashMode. | |
| */ | |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, | |
| GEN9_PBE_COMPRESSED_HASH_SELECTION); | |
| wa_mcr_masked_en(wal, GEN9_HALF_SLICE_CHICKEN7, | |
| GEN9_SAMPLER_HASH_COMPRESSED_READ_ADDR); | |
| } | |
| /* WaClearFlowControlGpgpuContextSave:skl,bxt,kbl,glk,cfl */ | |
| /* WaDisablePartialInstShootdown:skl,bxt,kbl,glk,cfl */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, | |
| FLOW_CONTROL_ENABLE | | |
| PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE); | |
| /* WaEnableYV12BugFixInHalfSliceChicken7:skl,bxt,kbl,glk,cfl */ | |
| /* WaEnableSamplerGPGPUPreemptionSupport:skl,bxt,kbl,cfl */ | |
| wa_mcr_masked_en(wal, GEN9_HALF_SLICE_CHICKEN7, | |
| GEN9_ENABLE_YV12_BUGFIX | | |
| GEN9_ENABLE_GPGPU_PREEMPTION); | |
| /* Wa4x4STCOptimizationDisable:skl,bxt,kbl,glk,cfl */ | |
| /* WaDisablePartialResolveInVc:skl,bxt,kbl,cfl */ | |
| wa_masked_en(wal, CACHE_MODE_1, | |
| GEN8_4x4_STC_OPTIMIZATION_DISABLE | | |
| GEN9_PARTIAL_RESOLVE_IN_VC_DISABLE); | |
| /* WaCcsTlbPrefetchDisable:skl,bxt,kbl,glk,cfl */ | |
| wa_mcr_masked_dis(wal, GEN9_HALF_SLICE_CHICKEN5, | |
| GEN9_CCS_TLB_PREFETCH_ENABLE); | |
| /* WaForceContextSaveRestoreNonCoherent:skl,bxt,kbl,cfl */ | |
| wa_masked_en(wal, HDC_CHICKEN0, | |
| HDC_FORCE_CONTEXT_SAVE_RESTORE_NON_COHERENT | | |
| HDC_FORCE_CSR_NON_COHERENT_OVR_DISABLE); | |
| /* WaForceEnableNonCoherent and WaDisableHDCInvalidation are | |
| * both tied to WaForceContextSaveRestoreNonCoherent | |
| * in some hsds for skl. We keep the tie for all gen9. The | |
| * documentation is a bit hazy and so we want to get common behaviour, | |
| * even though there is no clear evidence we would need both on kbl/bxt. | |
| * This area has been source of system hangs so we play it safe | |
| * and mimic the skl regardless of what bspec says. | |
| * | |
| * Use Force Non-Coherent whenever executing a 3D context. This | |
| * is a workaround for a possible hang in the unlikely event | |
| * a TLB invalidation occurs during a PSD flush. | |
| */ | |
| /* WaForceEnableNonCoherent:skl,bxt,kbl,cfl */ | |
| wa_masked_en(wal, HDC_CHICKEN0, | |
| HDC_FORCE_NON_COHERENT); | |
| /* WaDisableSamplerPowerBypassForSOPingPong:skl,bxt,kbl,cfl */ | |
| if (IS_SKYLAKE(i915) || | |
| IS_KABYLAKE(i915) || | |
| IS_COFFEELAKE(i915) || | |
| IS_COMETLAKE(i915)) | |
| wa_mcr_masked_en(wal, GEN8_HALF_SLICE_CHICKEN3, | |
| GEN8_SAMPLER_POWER_BYPASS_DIS); | |
| /* WaDisableSTUnitPowerOptimization:skl,bxt,kbl,glk,cfl */ | |
| wa_mcr_masked_en(wal, HALF_SLICE_CHICKEN2, GEN8_ST_PO_DISABLE); | |
| /* | |
| * Supporting preemption with fine-granularity requires changes in the | |
| * batch buffer programming. Since we can't break old userspace, we | |
| * need to set our default preemption level to safe value. Userspace is | |
| * still able to use more fine-grained preemption levels, since in | |
| * WaEnablePreemptionGranularityControlByUMD we're whitelisting the | |
| * per-ctx register. As such, WaDisable{3D,GPGPU}MidCmdPreemption are | |
| * not real HW workarounds, but merely a way to start using preemption | |
| * while maintaining old contract with userspace. | |
| */ | |
| /* WaDisable3DMidCmdPreemption:skl,bxt,glk,cfl,[cnl] */ | |
| wa_masked_dis(wal, GEN8_CS_CHICKEN1, GEN9_PREEMPT_3D_OBJECT_LEVEL); | |
| /* WaDisableGPGPUMidCmdPreemption:skl,bxt,blk,cfl,[cnl] */ | |
| wa_masked_field_set(wal, GEN8_CS_CHICKEN1, | |
| GEN9_PREEMPT_GPGPU_LEVEL_MASK, | |
| GEN9_PREEMPT_GPGPU_COMMAND_LEVEL); | |
| /* WaClearHIZ_WM_CHICKEN3:bxt,glk */ | |
| if (IS_GEN9_LP(i915)) | |
| wa_masked_en(wal, GEN9_WM_CHICKEN3, GEN9_FACTOR_IN_CLR_VAL_HIZ); | |
| } | |
| static void skl_tune_iz_hashing(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| struct intel_gt *gt = engine->gt; | |
| u8 vals[3] = { 0, 0, 0 }; | |
| unsigned int i; | |
| for (i = 0; i < 3; i++) { | |
| u8 ss; | |
| /* | |
| * Only consider slices where one, and only one, subslice has 7 | |
| * EUs | |
| */ | |
| if (!is_power_of_2(gt->info.sseu.subslice_7eu[i])) | |
| continue; | |
| /* | |
| * subslice_7eu[i] != 0 (because of the check above) and | |
| * ss_max == 4 (maximum number of subslices possible per slice) | |
| * | |
| * -> 0 <= ss <= 3; | |
| */ | |
| ss = ffs(gt->info.sseu.subslice_7eu[i]) - 1; | |
| vals[i] = 3 - ss; | |
| } | |
| if (vals[0] == 0 && vals[1] == 0 && vals[2] == 0) | |
| return; | |
| /* Tune IZ hashing. See intel_device_info_runtime_init() */ | |
| wa_masked_field_set(wal, GEN7_GT_MODE, | |
| GEN9_IZ_HASHING_MASK(2) | | |
| GEN9_IZ_HASHING_MASK(1) | | |
| GEN9_IZ_HASHING_MASK(0), | |
| GEN9_IZ_HASHING(2, vals[2]) | | |
| GEN9_IZ_HASHING(1, vals[1]) | | |
| GEN9_IZ_HASHING(0, vals[0])); | |
| } | |
| static void skl_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| gen9_ctx_workarounds_init(engine, wal); | |
| skl_tune_iz_hashing(engine, wal); | |
| } | |
| static void bxt_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| gen9_ctx_workarounds_init(engine, wal); | |
| /* WaDisableThreadStallDopClockGating:bxt */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN, | |
| STALL_DOP_GATING_DISABLE); | |
| /* WaToEnableHwFixForPushConstHWBug:bxt */ | |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, | |
| GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); | |
| } | |
| static void kbl_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| gen9_ctx_workarounds_init(engine, wal); | |
| /* WaToEnableHwFixForPushConstHWBug:kbl */ | |
| if (IS_KABYLAKE(i915) && IS_GRAPHICS_STEP(i915, STEP_C0, STEP_FOREVER)) | |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, | |
| GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); | |
| /* WaDisableSbeCacheDispatchPortSharing:kbl */ | |
| wa_mcr_masked_en(wal, GEN8_HALF_SLICE_CHICKEN1, | |
| GEN7_SBE_SS_CACHE_DISPATCH_PORT_SHARING_DISABLE); | |
| } | |
| static void glk_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| gen9_ctx_workarounds_init(engine, wal); | |
| /* WaToEnableHwFixForPushConstHWBug:glk */ | |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, | |
| GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); | |
| } | |
| static void cfl_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| gen9_ctx_workarounds_init(engine, wal); | |
| /* WaToEnableHwFixForPushConstHWBug:cfl */ | |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN2, | |
| GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); | |
| /* WaDisableSbeCacheDispatchPortSharing:cfl */ | |
| wa_mcr_masked_en(wal, GEN8_HALF_SLICE_CHICKEN1, | |
| GEN7_SBE_SS_CACHE_DISPATCH_PORT_SHARING_DISABLE); | |
| } | |
| static void icl_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| /* Wa_1406697149 (WaDisableBankHangMode:icl) */ | |
| wa_write(wal, GEN8_L3CNTLREG, GEN8_ERRDETBCTRL); | |
| /* WaForceEnableNonCoherent:icl | |
| * This is not the same workaround as in early Gen9 platforms, where | |
| * lacking this could cause system hangs, but coherency performance | |
| * overhead is high and only a few compute workloads really need it | |
| * (the register is whitelisted in hardware now, so UMDs can opt in | |
| * for coherency if they have a good reason). | |
| */ | |
| wa_mcr_masked_en(wal, ICL_HDC_MODE, HDC_FORCE_NON_COHERENT); | |
| /* WaEnableFloatBlendOptimization:icl */ | |
| wa_mcr_add(wal, GEN10_CACHE_MODE_SS, 0, | |
| REG_MASKED_FIELD_ENABLE(FLOAT_BLEND_OPTIMIZATION_ENABLE), | |
| 0 /* write-only, so skip validation */, | |
| true); | |
| /* WaDisableGPGPUMidThreadPreemption:icl */ | |
| wa_masked_field_set(wal, GEN8_CS_CHICKEN1, | |
| GEN9_PREEMPT_GPGPU_LEVEL_MASK, | |
| GEN9_PREEMPT_GPGPU_THREAD_GROUP_LEVEL); | |
| /* allow headerless messages for preemptible GPGPU context */ | |
| wa_mcr_masked_en(wal, GEN10_SAMPLER_MODE, | |
| GEN11_SAMPLER_ENABLE_HEADLESS_MSG); | |
| /* Wa_1604278689:icl,ehl */ | |
| wa_write(wal, IVB_FBC_RT_BASE, 0xFFFFFFFF & ~ILK_FBC_RT_VALID); | |
| wa_write_clr_set(wal, IVB_FBC_RT_BASE_UPPER, | |
| 0, | |
| 0xFFFFFFFF); | |
| /* Wa_1406306137:icl,ehl */ | |
| wa_mcr_masked_en(wal, GEN9_ROW_CHICKEN4, GEN11_DIS_PICK_2ND_EU); | |
| if (IS_JASPERLAKE(i915) || IS_ELKHARTLAKE(i915)) { | |
| /* | |
| * Disable Repacking for Compression (masked R/W access) | |
| * before rendering compressed surfaces for display. | |
| */ | |
| wa_masked_en(wal, CACHE_MODE_0_GEN7, | |
| DISABLE_REPACKING_FOR_COMPRESSION); | |
| } | |
| } | |
| /* | |
| * These settings aren't actually workarounds, but general tuning settings that | |
| * need to be programmed on dg2 platform. | |
| */ | |
| static void dg2_ctx_gt_tuning_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| wa_mcr_masked_en(wal, CHICKEN_RASTER_2, TBIMR_FAST_CLIP); | |
| wa_mcr_write_clr_set(wal, XEHP_L3SQCREG5, L3_PWM_TIMER_INIT_VAL_MASK, | |
| REG_FIELD_PREP(L3_PWM_TIMER_INIT_VAL_MASK, 0x7f)); | |
| wa_mcr_write_clr_set(wal, XEHP_FF_MODE2, FF_MODE2_TDS_TIMER_MASK, | |
| FF_MODE2_TDS_TIMER_128); | |
| } | |
| static void gen12_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| /* | |
| * Wa_1409142259:tgl,dg1,adl-p,adl-n | |
| * Wa_1409347922:tgl,dg1,adl-p | |
| * Wa_1409252684:tgl,dg1,adl-p | |
| * Wa_1409217633:tgl,dg1,adl-p | |
| * Wa_1409207793:tgl,dg1,adl-p | |
| * Wa_1409178076:tgl,dg1,adl-p,adl-n | |
| * Wa_1408979724:tgl,dg1,adl-p,adl-n | |
| * Wa_14010443199:tgl,rkl,dg1,adl-p,adl-n | |
| * Wa_14010698770:tgl,rkl,dg1,adl-s,adl-p,adl-n | |
| * Wa_1409342910:tgl,rkl,dg1,adl-s,adl-p,adl-n | |
| * Wa_22010465259:tgl,rkl,dg1,adl-s,adl-p,adl-n | |
| */ | |
| wa_masked_en(wal, GEN11_COMMON_SLICE_CHICKEN3, | |
| GEN12_DISABLE_CPS_AWARE_COLOR_PIPE); | |
| /* WaDisableGPGPUMidThreadPreemption:gen12 */ | |
| wa_masked_field_set(wal, GEN8_CS_CHICKEN1, | |
| GEN9_PREEMPT_GPGPU_LEVEL_MASK, | |
| GEN9_PREEMPT_GPGPU_THREAD_GROUP_LEVEL); | |
| /* | |
| * Wa_16011163337 - GS_TIMER | |
| * | |
| * TDS_TIMER: Although some platforms refer to it as Wa_1604555607, we | |
| * need to program it even on those that don't explicitly list that | |
| * workaround. | |
| * | |
| * Note that the programming of GEN12_FF_MODE2 is further modified | |
| * according to the FF_MODE2 guidance given by Wa_1608008084. | |
| * Wa_1608008084 tells us the FF_MODE2 register will return the wrong | |
| * value when read from the CPU. | |
| * | |
| * The default value for this register is zero for all fields. | |
| * So instead of doing a RMW we should just write the desired values | |
| * for TDS and GS timers. Note that since the readback can't be trusted, | |
| * the clear mask is just set to ~0 to make sure other bits are not | |
| * inadvertently set. For the same reason read verification is ignored. | |
| */ | |
| wa_add(wal, | |
| GEN12_FF_MODE2, | |
| ~0, | |
| FF_MODE2_TDS_TIMER_128 | FF_MODE2_GS_TIMER_224, | |
| 0, false); | |
| if (!IS_DG1(i915)) { | |
| /* Wa_1806527549 */ | |
| wa_masked_en(wal, HIZ_CHICKEN, HZ_DEPTH_TEST_LE_GE_OPT_DISABLE); | |
| /* Wa_1606376872 */ | |
| wa_masked_en(wal, COMMON_SLICE_CHICKEN4, DISABLE_TDC_LOAD_BALANCING_CALC); | |
| } | |
| /* | |
| * This bit must be set to enable performance optimization for fast | |
| * clears. | |
| */ | |
| wa_mcr_write_or(wal, GEN8_WM_CHICKEN2, WAIT_ON_DEPTH_STALL_DONE_DISABLE); | |
| } | |
| static void dg1_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| gen12_ctx_workarounds_init(engine, wal); | |
| /* Wa_1409044764 */ | |
| wa_masked_dis(wal, GEN11_COMMON_SLICE_CHICKEN3, | |
| DG1_FLOAT_POINT_BLEND_OPT_STRICT_MODE_EN); | |
| /* Wa_22010493298 */ | |
| wa_masked_en(wal, HIZ_CHICKEN, | |
| DG1_HZ_READ_SUPPRESSION_OPTIMIZATION_DISABLE); | |
| } | |
| static void dg2_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| dg2_ctx_gt_tuning_init(engine, wal); | |
| /* Wa_16013271637:dg2 */ | |
| wa_mcr_masked_en(wal, XEHP_SLICE_COMMON_ECO_CHICKEN1, | |
| MSC_MSAA_REODER_BUF_BYPASS_DISABLE); | |
| /* Wa_14014947963:dg2 */ | |
| wa_masked_field_set(wal, VF_PREEMPTION, PREEMPTION_VERTEX_COUNT, 0x4000); | |
| /* Wa_18018764978:dg2 */ | |
| wa_mcr_masked_en(wal, XEHP_PSS_MODE2, SCOREBOARD_STALL_FLUSH_CONTROL); | |
| /* Wa_18019271663:dg2 */ | |
| wa_masked_en(wal, CACHE_MODE_1, MSAA_OPTIMIZATION_REDUC_DISABLE); | |
| /* Wa_14019877138:dg2 */ | |
| wa_mcr_masked_en(wal, XEHP_PSS_CHICKEN, FD_END_COLLECT); | |
| } | |
| static void xelpg_ctx_gt_tuning_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| struct intel_gt *gt = engine->gt; | |
| dg2_ctx_gt_tuning_init(engine, wal); | |
| /* | |
| * Due to Wa_16014892111, the DRAW_WATERMARK tuning must be done in | |
| * gen12_emit_indirect_ctx_rcs() rather than here on some early | |
| * steppings. | |
| */ | |
| if (!(IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || | |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0))) | |
| wa_add(wal, DRAW_WATERMARK, VERT_WM_VAL, 0x3FF, 0, false); | |
| } | |
| static void xelpg_ctx_workarounds_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| struct intel_gt *gt = engine->gt; | |
| xelpg_ctx_gt_tuning_init(engine, wal); | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || | |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) { | |
| /* Wa_14014947963 */ | |
| wa_masked_field_set(wal, VF_PREEMPTION, | |
| PREEMPTION_VERTEX_COUNT, 0x4000); | |
| /* Wa_16013271637 */ | |
| wa_mcr_masked_en(wal, XEHP_SLICE_COMMON_ECO_CHICKEN1, | |
| MSC_MSAA_REODER_BUF_BYPASS_DISABLE); | |
| /* Wa_18019627453 */ | |
| wa_mcr_masked_en(wal, VFLSKPD, VF_PREFETCH_TLB_DIS); | |
| /* Wa_18018764978 */ | |
| wa_mcr_masked_en(wal, XEHP_PSS_MODE2, SCOREBOARD_STALL_FLUSH_CONTROL); | |
| } | |
| /* Wa_18019271663 */ | |
| wa_masked_en(wal, CACHE_MODE_1, MSAA_OPTIMIZATION_REDUC_DISABLE); | |
| /* Wa_14019877138 */ | |
| wa_mcr_masked_en(wal, XEHP_PSS_CHICKEN, FD_END_COLLECT); | |
| } | |
| static void fakewa_disable_nestedbb_mode(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| /* | |
| * This is a "fake" workaround defined by software to ensure we | |
| * maintain reliable, backward-compatible behavior for userspace with | |
| * regards to how nested MI_BATCH_BUFFER_START commands are handled. | |
| * | |
| * The per-context setting of MI_MODE[12] determines whether the bits | |
| * of a nested MI_BATCH_BUFFER_START instruction should be interpreted | |
| * in the traditional manner or whether they should instead use a new | |
| * tgl+ meaning that breaks backward compatibility, but allows nesting | |
| * into 3rd-level batchbuffers. When this new capability was first | |
| * added in TGL, it remained off by default unless a context | |
| * intentionally opted in to the new behavior. However Xe_HPG now | |
| * flips this on by default and requires that we explicitly opt out if | |
| * we don't want the new behavior. | |
| * | |
| * From a SW perspective, we want to maintain the backward-compatible | |
| * behavior for userspace, so we'll apply a fake workaround to set it | |
| * back to the legacy behavior on platforms where the hardware default | |
| * is to break compatibility. At the moment there is no Linux | |
| * userspace that utilizes third-level batchbuffers, so this will avoid | |
| * userspace from needing to make any changes. using the legacy | |
| * meaning is the correct thing to do. If/when we have userspace | |
| * consumers that want to utilize third-level batch nesting, we can | |
| * provide a context parameter to allow them to opt-in. | |
| */ | |
| wa_masked_dis(wal, RING_MI_MODE(engine->mmio_base), TGL_NESTED_BB_EN); | |
| } | |
| static void gen12_ctx_gt_mocs_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| u8 mocs; | |
| /* | |
| * Some blitter commands do not have a field for MOCS, those | |
| * commands will use MOCS index pointed by BLIT_CCTL. | |
| * BLIT_CCTL registers are needed to be programmed to un-cached. | |
| */ | |
| if (engine->class == COPY_ENGINE_CLASS) { | |
| mocs = engine->gt->mocs.uc_index; | |
| wa_write_clr_set(wal, | |
| BLIT_CCTL(engine->mmio_base), | |
| BLIT_CCTL_MASK, | |
| BLIT_CCTL_MOCS(mocs, mocs)); | |
| } | |
| } | |
| /* | |
| * gen12_ctx_gt_fake_wa_init() aren't programmingan official workaround | |
| * defined by the hardware team, but it programming general context registers. | |
| * Adding those context register programming in context workaround | |
| * allow us to use the wa framework for proper application and validation. | |
| */ | |
| static void | |
| gen12_ctx_gt_fake_wa_init(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal) | |
| { | |
| if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55)) | |
| fakewa_disable_nestedbb_mode(engine, wal); | |
| gen12_ctx_gt_mocs_init(engine, wal); | |
| } | |
| static void | |
| __intel_engine_init_ctx_wa(struct intel_engine_cs *engine, | |
| struct i915_wa_list *wal, | |
| const char *name) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| wa_init_start(wal, engine->gt, name, engine->name); | |
| /* Applies to all engines */ | |
| /* | |
| * Fake workarounds are not the actual workaround but | |
| * programming of context registers using workaround framework. | |
| */ | |
| if (GRAPHICS_VER(i915) >= 12) | |
| gen12_ctx_gt_fake_wa_init(engine, wal); | |
| if (engine->class != RENDER_CLASS) | |
| goto done; | |
| if (IS_GFX_GT_IP_RANGE(engine->gt, IP_VER(12, 70), IP_VER(12, 74))) | |
| xelpg_ctx_workarounds_init(engine, wal); | |
| else if (IS_DG2(i915)) | |
| dg2_ctx_workarounds_init(engine, wal); | |
| else if (IS_DG1(i915)) | |
| dg1_ctx_workarounds_init(engine, wal); | |
| else if (GRAPHICS_VER(i915) == 12) | |
| gen12_ctx_workarounds_init(engine, wal); | |
| else if (GRAPHICS_VER(i915) == 11) | |
| icl_ctx_workarounds_init(engine, wal); | |
| else if (IS_COFFEELAKE(i915) || IS_COMETLAKE(i915)) | |
| cfl_ctx_workarounds_init(engine, wal); | |
| else if (IS_GEMINILAKE(i915)) | |
| glk_ctx_workarounds_init(engine, wal); | |
| else if (IS_KABYLAKE(i915)) | |
| kbl_ctx_workarounds_init(engine, wal); | |
| else if (IS_BROXTON(i915)) | |
| bxt_ctx_workarounds_init(engine, wal); | |
| else if (IS_SKYLAKE(i915)) | |
| skl_ctx_workarounds_init(engine, wal); | |
| else if (IS_CHERRYVIEW(i915)) | |
| chv_ctx_workarounds_init(engine, wal); | |
| else if (IS_BROADWELL(i915)) | |
| bdw_ctx_workarounds_init(engine, wal); | |
| else if (GRAPHICS_VER(i915) == 7) | |
| gen7_ctx_workarounds_init(engine, wal); | |
| else if (GRAPHICS_VER(i915) == 6) | |
| gen6_ctx_workarounds_init(engine, wal); | |
| else if (GRAPHICS_VER(i915) < 8) | |
| ; | |
| else | |
| MISSING_CASE(GRAPHICS_VER(i915)); | |
| done: | |
| wa_init_finish(wal); | |
| } | |
| void intel_engine_init_ctx_wa(struct intel_engine_cs *engine) | |
| { | |
| __intel_engine_init_ctx_wa(engine, &engine->ctx_wa_list, "context"); | |
| } | |
| int intel_engine_emit_ctx_wa(struct i915_request *rq) | |
| { | |
| struct i915_wa_list *wal = &rq->engine->ctx_wa_list; | |
| struct intel_uncore *uncore = rq->engine->uncore; | |
| enum forcewake_domains fw; | |
| unsigned long flags; | |
| struct i915_wa *wa; | |
| unsigned int i; | |
| u32 *cs; | |
| int ret; | |
| if (wal->count == 0) | |
| return 0; | |
| ret = rq->engine->emit_flush(rq, EMIT_BARRIER); | |
| if (ret) | |
| return ret; | |
| if ((IS_GFX_GT_IP_RANGE(rq->engine->gt, IP_VER(12, 70), IP_VER(12, 74)) || | |
| IS_DG2(rq->i915)) && rq->engine->class == RENDER_CLASS) | |
| cs = intel_ring_begin(rq, (wal->count * 2 + 6)); | |
| else | |
| cs = intel_ring_begin(rq, (wal->count * 2 + 2)); | |
| if (IS_ERR(cs)) | |
| return PTR_ERR(cs); | |
| fw = wal_get_fw_for_rmw(uncore, wal); | |
| intel_gt_mcr_lock(wal->gt, &flags); | |
| spin_lock(&uncore->lock); | |
| intel_uncore_forcewake_get__locked(uncore, fw); | |
| *cs++ = MI_LOAD_REGISTER_IMM(wal->count); | |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { | |
| u32 val; | |
| /* Skip reading the register if it's not really needed */ | |
| if (wa->masked_reg || (wa->clr | wa->set) == U32_MAX) { | |
| val = wa->set; | |
| } else { | |
| val = wa->is_mcr ? | |
| intel_gt_mcr_read_any_fw(wal->gt, wa->mcr_reg) : | |
| intel_uncore_read_fw(uncore, wa->reg); | |
| val &= ~wa->clr; | |
| val |= wa->set; | |
| } | |
| *cs++ = i915_mmio_reg_offset(wa->reg); | |
| *cs++ = val; | |
| } | |
| *cs++ = MI_NOOP; | |
| /* Wa_14019789679 */ | |
| if ((IS_GFX_GT_IP_RANGE(rq->engine->gt, IP_VER(12, 70), IP_VER(12, 74)) || | |
| IS_DG2(rq->i915)) && rq->engine->class == RENDER_CLASS) { | |
| *cs++ = CMD_3DSTATE_MESH_CONTROL; | |
| *cs++ = 0; | |
| *cs++ = 0; | |
| *cs++ = MI_NOOP; | |
| } | |
| intel_uncore_forcewake_put__locked(uncore, fw); | |
| spin_unlock(&uncore->lock); | |
| intel_gt_mcr_unlock(wal->gt, flags); | |
| intel_ring_advance(rq, cs); | |
| ret = rq->engine->emit_flush(rq, EMIT_BARRIER); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static void | |
| gen4_gt_workarounds_init(struct intel_gt *gt, | |
| struct i915_wa_list *wal) | |
| { | |
| /* WaDisable_RenderCache_OperationalFlush:gen4,ilk */ | |
| wa_masked_dis(wal, CACHE_MODE_0, RC_OP_FLUSH_ENABLE); | |
| } | |
| static void | |
| g4x_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| gen4_gt_workarounds_init(gt, wal); | |
| /* WaDisableRenderCachePipelinedFlush:g4x,ilk */ | |
| wa_masked_en(wal, CACHE_MODE_0, CM0_PIPELINED_RENDER_FLUSH_DISABLE); | |
| } | |
| static void | |
| ilk_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| g4x_gt_workarounds_init(gt, wal); | |
| wa_masked_en(wal, _3D_CHICKEN2, _3D_CHICKEN2_WM_READ_PIPELINED); | |
| } | |
| static void | |
| snb_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| } | |
| static void | |
| ivb_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| /* Apply the WaDisableRHWOOptimizationForRenderHang:ivb workaround. */ | |
| wa_masked_dis(wal, | |
| GEN7_COMMON_SLICE_CHICKEN1, | |
| GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); | |
| /* WaApplyL3ControlAndL3ChickenMode:ivb */ | |
| wa_write(wal, GEN7_L3CNTLREG1, GEN7_WA_FOR_GEN7_L3_CONTROL); | |
| wa_write(wal, GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE); | |
| /* WaForceL3Serialization:ivb */ | |
| wa_write_clr(wal, GEN7_L3SQCREG4, L3SQ_URB_READ_CAM_MATCH_DISABLE); | |
| } | |
| static void | |
| vlv_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| /* WaForceL3Serialization:vlv */ | |
| wa_write_clr(wal, GEN7_L3SQCREG4, L3SQ_URB_READ_CAM_MATCH_DISABLE); | |
| /* | |
| * WaIncreaseL3CreditsForVLVB0:vlv | |
| * This is the hardware default actually. | |
| */ | |
| wa_write(wal, GEN7_L3SQCREG1, VLV_B0_WA_L3SQCREG1_VALUE); | |
| } | |
| static void | |
| hsw_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| /* L3 caching of data atomics doesn't work -- disable it. */ | |
| wa_write(wal, HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE); | |
| wa_add(wal, | |
| HSW_ROW_CHICKEN3, 0, | |
| REG_MASKED_FIELD_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE), | |
| 0 /* XXX does this reg exist? */, true); | |
| /* WaVSRefCountFullforceMissDisable:hsw */ | |
| wa_write_clr(wal, GEN7_FF_THREAD_MODE, GEN7_FF_VS_REF_CNT_FFME); | |
| } | |
| static void | |
| gen9_wa_init_mcr(struct drm_i915_private *i915, struct i915_wa_list *wal) | |
| { | |
| const struct sseu_dev_info *sseu = &to_gt(i915)->info.sseu; | |
| unsigned int slice, subslice; | |
| u32 mcr, mcr_mask; | |
| GEM_BUG_ON(GRAPHICS_VER(i915) != 9); | |
| /* | |
| * WaProgramMgsrForCorrectSliceSpecificMmioReads:gen9,glk,kbl,cml | |
| * Before any MMIO read into slice/subslice specific registers, MCR | |
| * packet control register needs to be programmed to point to any | |
| * enabled s/ss pair. Otherwise, incorrect values will be returned. | |
| * This means each subsequent MMIO read will be forwarded to an | |
| * specific s/ss combination, but this is OK since these registers | |
| * are consistent across s/ss in almost all cases. In the rare | |
| * occasions, such as INSTDONE, where this value is dependent | |
| * on s/ss combo, the read should be done with read_subslice_reg. | |
| */ | |
| slice = ffs(sseu->slice_mask) - 1; | |
| GEM_BUG_ON(slice >= ARRAY_SIZE(sseu->subslice_mask.hsw)); | |
| subslice = ffs(intel_sseu_get_hsw_subslices(sseu, slice)); | |
| GEM_BUG_ON(!subslice); | |
| subslice--; | |
| /* | |
| * We use GEN8_MCR..() macros to calculate the |mcr| value for | |
| * Gen9 to address WaProgramMgsrForCorrectSliceSpecificMmioReads | |
| */ | |
| mcr = GEN8_MCR_SLICE(slice) | GEN8_MCR_SUBSLICE(subslice); | |
| mcr_mask = GEN8_MCR_SLICE_MASK | GEN8_MCR_SUBSLICE_MASK; | |
| drm_dbg(&i915->drm, "MCR slice:%d/subslice:%d = %x\n", slice, subslice, mcr); | |
| wa_write_clr_set(wal, GEN8_MCR_SELECTOR, mcr_mask, mcr); | |
| } | |
| static void | |
| gen9_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = gt->i915; | |
| /* WaProgramMgsrForCorrectSliceSpecificMmioReads:glk,kbl,cml,gen9 */ | |
| gen9_wa_init_mcr(i915, wal); | |
| /* WaDisableKillLogic:bxt,skl,kbl */ | |
| if (!IS_COFFEELAKE(i915) && !IS_COMETLAKE(i915)) | |
| wa_write_or(wal, | |
| GAM_ECOCHK, | |
| ECOCHK_DIS_TLB); | |
| if (HAS_LLC(i915)) { | |
| /* WaCompressedResourceSamplerPbeMediaNewHashMode:skl,kbl | |
| * | |
| * Must match Display Engine. See | |
| * WaCompressedResourceDisplayNewHashMode. | |
| */ | |
| wa_write_or(wal, | |
| MMCD_MISC_CTRL, | |
| MMCD_PCLA | MMCD_HOTSPOT_EN); | |
| } | |
| /* WaDisableHDCInvalidation:skl,bxt,kbl,cfl */ | |
| wa_write_or(wal, | |
| GAM_ECOCHK, | |
| BDW_DISABLE_HDC_INVALIDATION); | |
| } | |
| static void | |
| skl_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| gen9_gt_workarounds_init(gt, wal); | |
| /* WaDisableGafsUnitClkGating:skl */ | |
| wa_write_or(wal, | |
| GEN7_UCGCTL4, | |
| GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE); | |
| /* WaInPlaceDecompressionHang:skl */ | |
| if (IS_SKYLAKE(gt->i915) && IS_GRAPHICS_STEP(gt->i915, STEP_A0, STEP_H0)) | |
| wa_write_or(wal, | |
| GEN9_GAMT_ECO_REG_RW_IA, | |
| GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS); | |
| } | |
| static void | |
| kbl_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| gen9_gt_workarounds_init(gt, wal); | |
| /* WaDisableDynamicCreditSharing:kbl */ | |
| if (IS_KABYLAKE(gt->i915) && IS_GRAPHICS_STEP(gt->i915, 0, STEP_C0)) | |
| wa_write_or(wal, | |
| GAMT_CHKN_BIT_REG, | |
| GAMT_CHKN_DISABLE_DYNAMIC_CREDIT_SHARING); | |
| /* WaDisableGafsUnitClkGating:kbl */ | |
| wa_write_or(wal, | |
| GEN7_UCGCTL4, | |
| GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE); | |
| /* WaInPlaceDecompressionHang:kbl */ | |
| wa_write_or(wal, | |
| GEN9_GAMT_ECO_REG_RW_IA, | |
| GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS); | |
| } | |
| static void | |
| glk_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| gen9_gt_workarounds_init(gt, wal); | |
| } | |
| static void | |
| cfl_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| gen9_gt_workarounds_init(gt, wal); | |
| /* WaDisableGafsUnitClkGating:cfl */ | |
| wa_write_or(wal, | |
| GEN7_UCGCTL4, | |
| GEN8_EU_GAUNIT_CLOCK_GATE_DISABLE); | |
| /* WaInPlaceDecompressionHang:cfl */ | |
| wa_write_or(wal, | |
| GEN9_GAMT_ECO_REG_RW_IA, | |
| GAMT_ECO_ENABLE_IN_PLACE_DECOMPRESS); | |
| } | |
| static void __set_mcr_steering(struct i915_wa_list *wal, | |
| i915_reg_t steering_reg, | |
| unsigned int slice, unsigned int subslice) | |
| { | |
| u32 mcr, mcr_mask; | |
| mcr = GEN11_MCR_SLICE(slice) | GEN11_MCR_SUBSLICE(subslice); | |
| mcr_mask = GEN11_MCR_SLICE_MASK | GEN11_MCR_SUBSLICE_MASK; | |
| wa_write_clr_set(wal, steering_reg, mcr_mask, mcr); | |
| } | |
| static void debug_dump_steering(struct intel_gt *gt) | |
| { | |
| struct drm_printer p = drm_dbg_printer(>->i915->drm, DRM_UT_DRIVER, | |
| "MCR Steering:"); | |
| if (drm_debug_enabled(DRM_UT_DRIVER)) | |
| intel_gt_mcr_report_steering(&p, gt, false); | |
| } | |
| static void __add_mcr_wa(struct intel_gt *gt, struct i915_wa_list *wal, | |
| unsigned int slice, unsigned int subslice) | |
| { | |
| __set_mcr_steering(wal, GEN8_MCR_SELECTOR, slice, subslice); | |
| gt->default_steering.groupid = slice; | |
| gt->default_steering.instanceid = subslice; | |
| debug_dump_steering(gt); | |
| } | |
| static void | |
| icl_wa_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| const struct sseu_dev_info *sseu = >->info.sseu; | |
| unsigned int subslice; | |
| GEM_BUG_ON(GRAPHICS_VER(gt->i915) < 11); | |
| GEM_BUG_ON(hweight8(sseu->slice_mask) > 1); | |
| /* | |
| * Although a platform may have subslices, we need to always steer | |
| * reads to the lowest instance that isn't fused off. When Render | |
| * Power Gating is enabled, grabbing forcewake will only power up a | |
| * single subslice (the "minconfig") if there isn't a real workload | |
| * that needs to be run; this means that if we steer register reads to | |
| * one of the higher subslices, we run the risk of reading back 0's or | |
| * random garbage. | |
| */ | |
| subslice = __ffs(intel_sseu_get_hsw_subslices(sseu, 0)); | |
| /* | |
| * If the subslice we picked above also steers us to a valid L3 bank, | |
| * then we can just rely on the default steering and won't need to | |
| * worry about explicitly re-steering L3BANK reads later. | |
| */ | |
| if (gt->info.l3bank_mask & BIT(subslice)) | |
| gt->steering_table[L3BANK] = NULL; | |
| __add_mcr_wa(gt, wal, 0, subslice); | |
| } | |
| static void | |
| xehp_init_mcr(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| const struct sseu_dev_info *sseu = >->info.sseu; | |
| unsigned long slice, subslice = 0, slice_mask = 0; | |
| u32 lncf_mask = 0; | |
| int i; | |
| /* | |
| * On Xe_HP the steering increases in complexity. There are now several | |
| * more units that require steering and we're not guaranteed to be able | |
| * to find a common setting for all of them. These are: | |
| * - GSLICE (fusable) | |
| * - DSS (sub-unit within gslice; fusable) | |
| * - L3 Bank (fusable) | |
| * - MSLICE (fusable) | |
| * - LNCF (sub-unit within mslice; always present if mslice is present) | |
| * | |
| * We'll do our default/implicit steering based on GSLICE (in the | |
| * sliceid field) and DSS (in the subsliceid field). If we can | |
| * find overlap between the valid MSLICE and/or LNCF values with | |
| * a suitable GSLICE, then we can just reuse the default value and | |
| * skip and explicit steering at runtime. | |
| * | |
| * We only need to look for overlap between GSLICE/MSLICE/LNCF to find | |
| * a valid sliceid value. DSS steering is the only type of steering | |
| * that utilizes the 'subsliceid' bits. | |
| * | |
| * Also note that, even though the steering domain is called "GSlice" | |
| * and it is encoded in the register using the gslice format, the spec | |
| * says that the combined (geometry | compute) fuse should be used to | |
| * select the steering. | |
| */ | |
| /* Find the potential gslice candidates */ | |
| slice_mask = intel_slicemask_from_xehp_dssmask(sseu->subslice_mask, | |
| GEN_DSS_PER_GSLICE); | |
| /* | |
| * Find the potential LNCF candidates. Either LNCF within a valid | |
| * mslice is fine. | |
| */ | |
| for_each_set_bit(i, >->info.mslice_mask, GEN12_MAX_MSLICES) | |
| lncf_mask |= (0x3 << (i * 2)); | |
| /* | |
| * Are there any sliceid values that work for both GSLICE and LNCF | |
| * steering? | |
| */ | |
| if (slice_mask & lncf_mask) { | |
| slice_mask &= lncf_mask; | |
| gt->steering_table[LNCF] = NULL; | |
| } | |
| /* How about sliceid values that also work for MSLICE steering? */ | |
| if (slice_mask & gt->info.mslice_mask) { | |
| slice_mask &= gt->info.mslice_mask; | |
| gt->steering_table[MSLICE] = NULL; | |
| } | |
| slice = __ffs(slice_mask); | |
| subslice = intel_sseu_find_first_xehp_dss(sseu, GEN_DSS_PER_GSLICE, slice) % | |
| GEN_DSS_PER_GSLICE; | |
| __add_mcr_wa(gt, wal, slice, subslice); | |
| /* | |
| * SQIDI ranges are special because they use different steering | |
| * registers than everything else we work with. On XeHP SDV and | |
| * DG2-G10, any value in the steering registers will work fine since | |
| * all instances are present, but DG2-G11 only has SQIDI instances at | |
| * ID's 2 and 3, so we need to steer to one of those. For simplicity | |
| * we'll just steer to a hardcoded "2" since that value will work | |
| * everywhere. | |
| */ | |
| __set_mcr_steering(wal, MCFG_MCR_SELECTOR, 0, 2); | |
| __set_mcr_steering(wal, SF_MCR_SELECTOR, 0, 2); | |
| /* | |
| * On DG2, GAM registers have a dedicated steering control register | |
| * and must always be programmed to a hardcoded groupid of "1." | |
| */ | |
| if (IS_DG2(gt->i915)) | |
| __set_mcr_steering(wal, GAM_MCR_SELECTOR, 1, 0); | |
| } | |
| static void | |
| icl_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = gt->i915; | |
| icl_wa_init_mcr(gt, wal); | |
| /* WaModifyGamTlbPartitioning:icl */ | |
| wa_write_clr_set(wal, | |
| GEN11_GACB_PERF_CTRL, | |
| GEN11_HASH_CTRL_MASK, | |
| GEN11_HASH_CTRL_BIT0 | GEN11_HASH_CTRL_BIT4); | |
| /* Wa_1405766107:icl | |
| * Formerly known as WaCL2SFHalfMaxAlloc | |
| */ | |
| wa_write_or(wal, | |
| GEN11_LSN_UNSLCVC, | |
| GEN11_LSN_UNSLCVC_GAFS_HALF_SF_MAXALLOC | | |
| GEN11_LSN_UNSLCVC_GAFS_HALF_CL2_MAXALLOC); | |
| /* Wa_220166154:icl | |
| * Formerly known as WaDisCtxReload | |
| */ | |
| wa_write_or(wal, | |
| GEN8_GAMW_ECO_DEV_RW_IA, | |
| GAMW_ECO_DEV_CTX_RELOAD_DISABLE); | |
| /* Wa_1406463099:icl | |
| * Formerly known as WaGamTlbPendError | |
| */ | |
| wa_write_or(wal, | |
| GAMT_CHKN_BIT_REG, | |
| GAMT_CHKN_DISABLE_L3_COH_PIPE); | |
| /* | |
| * Wa_1408615072:icl,ehl (vsunit) | |
| * Wa_1407596294:icl,ehl (hsunit) | |
| */ | |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE, | |
| VSUNIT_CLKGATE_DIS | HSUNIT_CLKGATE_DIS); | |
| /* Wa_1407352427:icl,ehl */ | |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE2, | |
| PSDUNIT_CLKGATE_DIS); | |
| /* Wa_1406680159:icl,ehl */ | |
| wa_mcr_write_or(wal, | |
| GEN11_SUBSLICE_UNIT_LEVEL_CLKGATE, | |
| GWUNIT_CLKGATE_DIS); | |
| /* Wa_1607087056:icl,ehl,jsl */ | |
| if (IS_ICELAKE(i915) || | |
| ((IS_JASPERLAKE(i915) || IS_ELKHARTLAKE(i915)) && | |
| IS_GRAPHICS_STEP(i915, STEP_A0, STEP_B0))) | |
| wa_write_or(wal, | |
| GEN11_SLICE_UNIT_LEVEL_CLKGATE, | |
| L3_CLKGATE_DIS | L3_CR2X_CLKGATE_DIS); | |
| /* | |
| * This is not a documented workaround, but rather an optimization | |
| * to reduce sampler power. | |
| */ | |
| wa_mcr_write_clr(wal, GEN10_DFR_RATIO_EN_AND_CHICKEN, DFR_DISABLE); | |
| } | |
| /* | |
| * Though there are per-engine instances of these registers, | |
| * they retain their value through engine resets and should | |
| * only be provided on the GT workaround list rather than | |
| * the engine-specific workaround list. | |
| */ | |
| static void | |
| wa_14011060649(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| struct intel_engine_cs *engine; | |
| int id; | |
| for_each_engine(engine, gt, id) { | |
| if (engine->class != VIDEO_DECODE_CLASS || | |
| (engine->instance % 2)) | |
| continue; | |
| wa_write_or(wal, VDBOX_CGCTL3F10(engine->mmio_base), | |
| IECPUNIT_CLKGATE_DIS); | |
| } | |
| } | |
| static void | |
| gen12_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| icl_wa_init_mcr(gt, wal); | |
| /* Wa_14011060649:tgl,rkl,dg1,adl-s,adl-p */ | |
| wa_14011060649(gt, wal); | |
| /* Wa_14011059788:tgl,rkl,adl-s,dg1,adl-p */ | |
| wa_mcr_write_or(wal, GEN10_DFR_RATIO_EN_AND_CHICKEN, DFR_DISABLE); | |
| /* | |
| * Wa_14015795083 | |
| * | |
| * Firmware on some gen12 platforms locks the MISCCPCTL register, | |
| * preventing i915 from modifying it for this workaround. Skip the | |
| * readback verification for this workaround on debug builds; if the | |
| * workaround doesn't stick due to firmware behavior, it's not an error | |
| * that we want CI to flag. | |
| */ | |
| wa_add(wal, GEN7_MISCCPCTL, GEN12_DOP_CLOCK_GATE_RENDER_ENABLE, | |
| 0, 0, false); | |
| } | |
| static void | |
| dg1_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| gen12_gt_workarounds_init(gt, wal); | |
| /* Wa_1409420604:dg1 */ | |
| wa_mcr_write_or(wal, SUBSLICE_UNIT_LEVEL_CLKGATE2, | |
| CPSSUNIT_CLKGATE_DIS); | |
| /* Wa_1408615072:dg1 */ | |
| /* Empirical testing shows this register is unaffected by engine reset. */ | |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE2, VSUNIT_CLKGATE_DIS_TGL); | |
| } | |
| static void | |
| dg2_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| xehp_init_mcr(gt, wal); | |
| /* Wa_14011060649:dg2 */ | |
| wa_14011060649(gt, wal); | |
| if (IS_DG2_G10(gt->i915)) { | |
| /* Wa_22010523718:dg2 */ | |
| wa_write_or(wal, UNSLICE_UNIT_LEVEL_CLKGATE, | |
| CG3DDISCFEG_CLKGATE_DIS); | |
| /* Wa_14011006942:dg2 */ | |
| wa_mcr_write_or(wal, GEN11_SUBSLICE_UNIT_LEVEL_CLKGATE, | |
| DSS_ROUTER_CLKGATE_DIS); | |
| } | |
| /* Wa_14014830051:dg2 */ | |
| wa_mcr_write_clr(wal, SARB_CHICKEN1, COMP_CKN_IN); | |
| /* | |
| * Wa_14015795083 | |
| * Skip verification for possibly locked register. | |
| */ | |
| wa_add(wal, GEN7_MISCCPCTL, GEN12_DOP_CLOCK_GATE_RENDER_ENABLE, | |
| 0, 0, false); | |
| /* Wa_18018781329 */ | |
| wa_mcr_write_or(wal, RENDER_MOD_CTRL, FORCE_MISS_FTLB); | |
| wa_mcr_write_or(wal, COMP_MOD_CTRL, FORCE_MISS_FTLB); | |
| wa_mcr_write_or(wal, XEHP_VDBX_MOD_CTRL, FORCE_MISS_FTLB); | |
| wa_mcr_write_or(wal, XEHP_VEBX_MOD_CTRL, FORCE_MISS_FTLB); | |
| /* Wa_1509235366:dg2 */ | |
| wa_mcr_write_or(wal, XEHP_GAMCNTRL_CTRL, | |
| INVALIDATION_BROADCAST_MODE_DIS | GLOBAL_INVALIDATION_MODE); | |
| /* Wa_14010648519:dg2 */ | |
| wa_mcr_write_or(wal, XEHP_L3NODEARBCFG, XEHP_LNESPARE); | |
| } | |
| static void | |
| xelpg_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| /* Wa_14018575942 / Wa_18018781329 */ | |
| wa_mcr_write_or(wal, RENDER_MOD_CTRL, FORCE_MISS_FTLB); | |
| wa_mcr_write_or(wal, COMP_MOD_CTRL, FORCE_MISS_FTLB); | |
| /* Wa_22016670082 */ | |
| wa_write_or(wal, GEN12_SQCNT1, GEN12_STRICT_RAR_ENABLE); | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || | |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) { | |
| /* Wa_14014830051 */ | |
| wa_mcr_write_clr(wal, SARB_CHICKEN1, COMP_CKN_IN); | |
| /* Wa_14015795083 */ | |
| wa_write_clr(wal, GEN7_MISCCPCTL, GEN12_DOP_CLOCK_GATE_RENDER_ENABLE); | |
| } | |
| /* | |
| * Unlike older platforms, we no longer setup implicit steering here; | |
| * all MCR accesses are explicitly steered. | |
| */ | |
| debug_dump_steering(gt); | |
| } | |
| static void | |
| wa_16021867713(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| struct intel_engine_cs *engine; | |
| int id; | |
| for_each_engine(engine, gt, id) | |
| if (engine->class == VIDEO_DECODE_CLASS) | |
| wa_write_or(wal, VDBOX_CGCTL3F1C(engine->mmio_base), | |
| MFXPIPE_CLKGATE_DIS); | |
| } | |
| static void | |
| xelpmp_gt_workarounds_init(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| wa_16021867713(gt, wal); | |
| /* | |
| * Wa_14018778641 | |
| * Wa_18018781329 | |
| * | |
| * Note that although these registers are MCR on the primary | |
| * GT, the media GT's versions are regular singleton registers. | |
| */ | |
| wa_write_or(wal, XELPMP_GSC_MOD_CTRL, FORCE_MISS_FTLB); | |
| /* | |
| * Wa_14018575942 | |
| * | |
| * Issue is seen on media KPI test running on VDBOX engine | |
| * especially VP9 encoding WLs | |
| */ | |
| wa_write_or(wal, XELPMP_VDBX_MOD_CTRL, FORCE_MISS_FTLB); | |
| /* Wa_22016670082 */ | |
| wa_write_or(wal, GEN12_SQCNT1, GEN12_STRICT_RAR_ENABLE); | |
| debug_dump_steering(gt); | |
| } | |
| /* | |
| * The bspec performance guide has recommended MMIO tuning settings. These | |
| * aren't truly "workarounds" but we want to program them through the | |
| * workaround infrastructure to make sure they're (re)applied at the proper | |
| * times. | |
| * | |
| * The programming in this function is for settings that persist through | |
| * engine resets and also are not part of any engine's register state context. | |
| * I.e., settings that only need to be re-applied in the event of a full GT | |
| * reset. | |
| */ | |
| static void gt_tuning_settings(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| if (IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 70), IP_VER(12, 74))) { | |
| wa_mcr_write_or(wal, XEHP_L3SCQREG7, BLEND_FILL_CACHING_OPT_DIS); | |
| wa_mcr_write_or(wal, XEHP_SQCM, EN_32B_ACCESS); | |
| } | |
| if (IS_DG2(gt->i915)) { | |
| wa_mcr_write_or(wal, XEHP_L3SCQREG7, BLEND_FILL_CACHING_OPT_DIS); | |
| wa_mcr_write_or(wal, XEHP_SQCM, EN_32B_ACCESS); | |
| } | |
| } | |
| static void | |
| gt_init_workarounds(struct intel_gt *gt, struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = gt->i915; | |
| gt_tuning_settings(gt, wal); | |
| if (gt->type == GT_MEDIA) { | |
| if (MEDIA_VER_FULL(i915) == IP_VER(13, 0)) | |
| xelpmp_gt_workarounds_init(gt, wal); | |
| else | |
| MISSING_CASE(MEDIA_VER_FULL(i915)); | |
| return; | |
| } | |
| if (IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 70), IP_VER(12, 74))) | |
| xelpg_gt_workarounds_init(gt, wal); | |
| else if (IS_DG2(i915)) | |
| dg2_gt_workarounds_init(gt, wal); | |
| else if (IS_DG1(i915)) | |
| dg1_gt_workarounds_init(gt, wal); | |
| else if (GRAPHICS_VER(i915) == 12) | |
| gen12_gt_workarounds_init(gt, wal); | |
| else if (GRAPHICS_VER(i915) == 11) | |
| icl_gt_workarounds_init(gt, wal); | |
| else if (IS_COFFEELAKE(i915) || IS_COMETLAKE(i915)) | |
| cfl_gt_workarounds_init(gt, wal); | |
| else if (IS_GEMINILAKE(i915)) | |
| glk_gt_workarounds_init(gt, wal); | |
| else if (IS_KABYLAKE(i915)) | |
| kbl_gt_workarounds_init(gt, wal); | |
| else if (IS_BROXTON(i915)) | |
| gen9_gt_workarounds_init(gt, wal); | |
| else if (IS_SKYLAKE(i915)) | |
| skl_gt_workarounds_init(gt, wal); | |
| else if (IS_HASWELL(i915)) | |
| hsw_gt_workarounds_init(gt, wal); | |
| else if (IS_VALLEYVIEW(i915)) | |
| vlv_gt_workarounds_init(gt, wal); | |
| else if (IS_IVYBRIDGE(i915)) | |
| ivb_gt_workarounds_init(gt, wal); | |
| else if (GRAPHICS_VER(i915) == 6) | |
| snb_gt_workarounds_init(gt, wal); | |
| else if (GRAPHICS_VER(i915) == 5) | |
| ilk_gt_workarounds_init(gt, wal); | |
| else if (IS_G4X(i915)) | |
| g4x_gt_workarounds_init(gt, wal); | |
| else if (GRAPHICS_VER(i915) == 4) | |
| gen4_gt_workarounds_init(gt, wal); | |
| else if (GRAPHICS_VER(i915) <= 8) | |
| ; | |
| else | |
| MISSING_CASE(GRAPHICS_VER(i915)); | |
| } | |
| void intel_gt_init_workarounds(struct intel_gt *gt) | |
| { | |
| struct i915_wa_list *wal = >->wa_list; | |
| wa_init_start(wal, gt, "GT", "global"); | |
| gt_init_workarounds(gt, wal); | |
| wa_init_finish(wal); | |
| } | |
| static bool | |
| wa_verify(struct intel_gt *gt, const struct i915_wa *wa, u32 cur, | |
| const char *name, const char *from) | |
| { | |
| if ((cur ^ wa->set) & wa->read) { | |
| gt_err(gt, | |
| "%s workaround lost on %s! (reg[%x]=0x%x, relevant bits were 0x%x vs expected 0x%x)\n", | |
| name, from, i915_mmio_reg_offset(wa->reg), | |
| cur, cur & wa->read, wa->set & wa->read); | |
| return false; | |
| } | |
| return true; | |
| } | |
| static void wa_list_apply(const struct i915_wa_list *wal) | |
| { | |
| struct intel_gt *gt = wal->gt; | |
| struct intel_uncore *uncore = gt->uncore; | |
| enum forcewake_domains fw; | |
| unsigned long flags; | |
| struct i915_wa *wa; | |
| unsigned int i; | |
| if (!wal->count) | |
| return; | |
| fw = wal_get_fw_for_rmw(uncore, wal); | |
| intel_gt_mcr_lock(gt, &flags); | |
| spin_lock(&uncore->lock); | |
| intel_uncore_forcewake_get__locked(uncore, fw); | |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { | |
| u32 val, old = 0; | |
| /* open-coded rmw due to steering */ | |
| if (wa->clr) | |
| old = wa->is_mcr ? | |
| intel_gt_mcr_read_any_fw(gt, wa->mcr_reg) : | |
| intel_uncore_read_fw(uncore, wa->reg); | |
| val = (old & ~wa->clr) | wa->set; | |
| if (val != old || !wa->clr) { | |
| if (wa->is_mcr) | |
| intel_gt_mcr_multicast_write_fw(gt, wa->mcr_reg, val); | |
| else | |
| intel_uncore_write_fw(uncore, wa->reg, val); | |
| } | |
| if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM)) { | |
| u32 val = wa->is_mcr ? | |
| intel_gt_mcr_read_any_fw(gt, wa->mcr_reg) : | |
| intel_uncore_read_fw(uncore, wa->reg); | |
| wa_verify(gt, wa, val, wal->name, "application"); | |
| } | |
| } | |
| intel_uncore_forcewake_put__locked(uncore, fw); | |
| spin_unlock(&uncore->lock); | |
| intel_gt_mcr_unlock(gt, flags); | |
| } | |
| void intel_gt_apply_workarounds(struct intel_gt *gt) | |
| { | |
| wa_list_apply(>->wa_list); | |
| } | |
| static bool wa_list_verify(struct intel_gt *gt, | |
| const struct i915_wa_list *wal, | |
| const char *from) | |
| { | |
| struct intel_uncore *uncore = gt->uncore; | |
| struct i915_wa *wa; | |
| enum forcewake_domains fw; | |
| unsigned long flags; | |
| unsigned int i; | |
| bool ok = true; | |
| fw = wal_get_fw_for_rmw(uncore, wal); | |
| intel_gt_mcr_lock(gt, &flags); | |
| spin_lock(&uncore->lock); | |
| intel_uncore_forcewake_get__locked(uncore, fw); | |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) | |
| ok &= wa_verify(wal->gt, wa, wa->is_mcr ? | |
| intel_gt_mcr_read_any_fw(gt, wa->mcr_reg) : | |
| intel_uncore_read_fw(uncore, wa->reg), | |
| wal->name, from); | |
| intel_uncore_forcewake_put__locked(uncore, fw); | |
| spin_unlock(&uncore->lock); | |
| intel_gt_mcr_unlock(gt, flags); | |
| return ok; | |
| } | |
| bool intel_gt_verify_workarounds(struct intel_gt *gt, const char *from) | |
| { | |
| return wa_list_verify(gt, >->wa_list, from); | |
| } | |
| __maybe_unused | |
| static bool is_nonpriv_flags_valid(u32 flags) | |
| { | |
| /* Check only valid flag bits are set */ | |
| if (flags & ~RING_FORCE_TO_NONPRIV_MASK_VALID) | |
| return false; | |
| /* NB: Only 3 out of 4 enum values are valid for access field */ | |
| if ((flags & RING_FORCE_TO_NONPRIV_ACCESS_MASK) == | |
| RING_FORCE_TO_NONPRIV_ACCESS_INVALID) | |
| return false; | |
| return true; | |
| } | |
| static void | |
| whitelist_reg_ext(struct i915_wa_list *wal, i915_reg_t reg, u32 flags) | |
| { | |
| struct i915_wa wa = { | |
| .reg = reg | |
| }; | |
| if (GEM_DEBUG_WARN_ON(wal->count >= RING_MAX_NONPRIV_SLOTS)) | |
| return; | |
| if (GEM_DEBUG_WARN_ON(!is_nonpriv_flags_valid(flags))) | |
| return; | |
| wa.reg.reg |= flags; | |
| _wa_add(wal, &wa); | |
| } | |
| static void | |
| whitelist_mcr_reg_ext(struct i915_wa_list *wal, i915_mcr_reg_t reg, u32 flags) | |
| { | |
| struct i915_wa wa = { | |
| .mcr_reg = reg, | |
| .is_mcr = 1, | |
| }; | |
| if (GEM_DEBUG_WARN_ON(wal->count >= RING_MAX_NONPRIV_SLOTS)) | |
| return; | |
| if (GEM_DEBUG_WARN_ON(!is_nonpriv_flags_valid(flags))) | |
| return; | |
| wa.mcr_reg.reg |= flags; | |
| _wa_add(wal, &wa); | |
| } | |
| static void | |
| whitelist_reg(struct i915_wa_list *wal, i915_reg_t reg) | |
| { | |
| whitelist_reg_ext(wal, reg, RING_FORCE_TO_NONPRIV_ACCESS_RW); | |
| } | |
| static void | |
| whitelist_mcr_reg(struct i915_wa_list *wal, i915_mcr_reg_t reg) | |
| { | |
| whitelist_mcr_reg_ext(wal, reg, RING_FORCE_TO_NONPRIV_ACCESS_RW); | |
| } | |
| static void gen9_whitelist_build(struct i915_wa_list *w) | |
| { | |
| /* WaVFEStateAfterPipeControlwithMediaStateClear:skl,bxt,glk,cfl */ | |
| whitelist_reg(w, GEN9_CTX_PREEMPT_REG); | |
| /* WaEnablePreemptionGranularityControlByUMD:skl,bxt,kbl,cfl,[cnl] */ | |
| whitelist_reg(w, GEN8_CS_CHICKEN1); | |
| /* WaAllowUMDToModifyHDCChicken1:skl,bxt,kbl,glk,cfl */ | |
| whitelist_reg(w, GEN8_HDC_CHICKEN1); | |
| /* WaSendPushConstantsFromMMIO:skl,bxt */ | |
| whitelist_reg(w, COMMON_SLICE_CHICKEN2); | |
| } | |
| static void skl_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *w = &engine->whitelist; | |
| if (engine->class != RENDER_CLASS) | |
| return; | |
| gen9_whitelist_build(w); | |
| /* WaDisableLSQCROPERFforOCL:skl */ | |
| whitelist_mcr_reg(w, GEN8_L3SQCREG4); | |
| } | |
| static void bxt_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| if (engine->class != RENDER_CLASS) | |
| return; | |
| gen9_whitelist_build(&engine->whitelist); | |
| } | |
| static void kbl_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *w = &engine->whitelist; | |
| if (engine->class != RENDER_CLASS) | |
| return; | |
| gen9_whitelist_build(w); | |
| /* WaDisableLSQCROPERFforOCL:kbl */ | |
| whitelist_mcr_reg(w, GEN8_L3SQCREG4); | |
| } | |
| static void glk_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *w = &engine->whitelist; | |
| if (engine->class != RENDER_CLASS) | |
| return; | |
| gen9_whitelist_build(w); | |
| /* WA #0862: Userspace has to set "Barrier Mode" to avoid hangs. */ | |
| whitelist_reg(w, GEN9_SLICE_COMMON_ECO_CHICKEN1); | |
| } | |
| static void cfl_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *w = &engine->whitelist; | |
| if (engine->class != RENDER_CLASS) | |
| return; | |
| gen9_whitelist_build(w); | |
| /* | |
| * WaAllowPMDepthAndInvocationCountAccessFromUMD:cfl,whl,cml,aml | |
| * | |
| * This covers 4 register which are next to one another : | |
| * - PS_INVOCATION_COUNT | |
| * - PS_INVOCATION_COUNT_UDW | |
| * - PS_DEPTH_COUNT | |
| * - PS_DEPTH_COUNT_UDW | |
| */ | |
| whitelist_reg_ext(w, PS_INVOCATION_COUNT, | |
| RING_FORCE_TO_NONPRIV_ACCESS_RD | | |
| RING_FORCE_TO_NONPRIV_RANGE_4); | |
| } | |
| static void allow_read_ctx_timestamp(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *w = &engine->whitelist; | |
| if (engine->class != RENDER_CLASS) | |
| whitelist_reg_ext(w, | |
| RING_CTX_TIMESTAMP(engine->mmio_base), | |
| RING_FORCE_TO_NONPRIV_ACCESS_RD); | |
| } | |
| static void cml_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| allow_read_ctx_timestamp(engine); | |
| cfl_whitelist_build(engine); | |
| } | |
| static void icl_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *w = &engine->whitelist; | |
| allow_read_ctx_timestamp(engine); | |
| switch (engine->class) { | |
| case RENDER_CLASS: | |
| /* WaAllowUMDToModifyHalfSliceChicken7:icl */ | |
| whitelist_mcr_reg(w, GEN9_HALF_SLICE_CHICKEN7); | |
| /* WaAllowUMDToModifySamplerMode:icl */ | |
| whitelist_mcr_reg(w, GEN10_SAMPLER_MODE); | |
| /* WaEnableStateCacheRedirectToCS:icl */ | |
| whitelist_reg(w, GEN9_SLICE_COMMON_ECO_CHICKEN1); | |
| /* | |
| * WaAllowPMDepthAndInvocationCountAccessFromUMD:icl | |
| * | |
| * This covers 4 register which are next to one another : | |
| * - PS_INVOCATION_COUNT | |
| * - PS_INVOCATION_COUNT_UDW | |
| * - PS_DEPTH_COUNT | |
| * - PS_DEPTH_COUNT_UDW | |
| */ | |
| whitelist_reg_ext(w, PS_INVOCATION_COUNT, | |
| RING_FORCE_TO_NONPRIV_ACCESS_RD | | |
| RING_FORCE_TO_NONPRIV_RANGE_4); | |
| break; | |
| case VIDEO_DECODE_CLASS: | |
| /* hucStatusRegOffset */ | |
| whitelist_reg_ext(w, _MMIO(0x2000 + engine->mmio_base), | |
| RING_FORCE_TO_NONPRIV_ACCESS_RD); | |
| /* hucUKernelHdrInfoRegOffset */ | |
| whitelist_reg_ext(w, _MMIO(0x2014 + engine->mmio_base), | |
| RING_FORCE_TO_NONPRIV_ACCESS_RD); | |
| /* hucStatus2RegOffset */ | |
| whitelist_reg_ext(w, _MMIO(0x23B0 + engine->mmio_base), | |
| RING_FORCE_TO_NONPRIV_ACCESS_RD); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void tgl_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *w = &engine->whitelist; | |
| allow_read_ctx_timestamp(engine); | |
| switch (engine->class) { | |
| case RENDER_CLASS: | |
| /* | |
| * WaAllowPMDepthAndInvocationCountAccessFromUMD:tgl | |
| * Wa_1408556865:tgl | |
| * | |
| * This covers 4 registers which are next to one another : | |
| * - PS_INVOCATION_COUNT | |
| * - PS_INVOCATION_COUNT_UDW | |
| * - PS_DEPTH_COUNT | |
| * - PS_DEPTH_COUNT_UDW | |
| */ | |
| whitelist_reg_ext(w, PS_INVOCATION_COUNT, | |
| RING_FORCE_TO_NONPRIV_ACCESS_RD | | |
| RING_FORCE_TO_NONPRIV_RANGE_4); | |
| /* | |
| * Wa_1808121037:tgl | |
| * Wa_14012131227:dg1 | |
| * Wa_1508744258:tgl,rkl,dg1,adl-s,adl-p | |
| */ | |
| whitelist_reg(w, GEN7_COMMON_SLICE_CHICKEN1); | |
| /* Wa_1806527549:tgl */ | |
| whitelist_reg(w, HIZ_CHICKEN); | |
| /* Required by recommended tuning setting (not a workaround) */ | |
| whitelist_reg(w, GEN11_COMMON_SLICE_CHICKEN3); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void dg2_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *w = &engine->whitelist; | |
| switch (engine->class) { | |
| case RENDER_CLASS: | |
| /* Required by recommended tuning setting (not a workaround) */ | |
| whitelist_mcr_reg(w, XEHP_COMMON_SLICE_CHICKEN3); | |
| whitelist_reg(w, GEN7_COMMON_SLICE_CHICKEN1); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void xelpg_whitelist_build(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *w = &engine->whitelist; | |
| switch (engine->class) { | |
| case RENDER_CLASS: | |
| /* Required by recommended tuning setting (not a workaround) */ | |
| whitelist_mcr_reg(w, XEHP_COMMON_SLICE_CHICKEN3); | |
| whitelist_reg(w, GEN7_COMMON_SLICE_CHICKEN1); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| void intel_engine_init_whitelist(struct intel_engine_cs *engine) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| struct i915_wa_list *w = &engine->whitelist; | |
| wa_init_start(w, engine->gt, "whitelist", engine->name); | |
| if (engine->gt->type == GT_MEDIA) | |
| ; /* none yet */ | |
| else if (IS_GFX_GT_IP_RANGE(engine->gt, IP_VER(12, 70), IP_VER(12, 74))) | |
| xelpg_whitelist_build(engine); | |
| else if (IS_DG2(i915)) | |
| dg2_whitelist_build(engine); | |
| else if (GRAPHICS_VER(i915) == 12) | |
| tgl_whitelist_build(engine); | |
| else if (GRAPHICS_VER(i915) == 11) | |
| icl_whitelist_build(engine); | |
| else if (IS_COMETLAKE(i915)) | |
| cml_whitelist_build(engine); | |
| else if (IS_COFFEELAKE(i915)) | |
| cfl_whitelist_build(engine); | |
| else if (IS_GEMINILAKE(i915)) | |
| glk_whitelist_build(engine); | |
| else if (IS_KABYLAKE(i915)) | |
| kbl_whitelist_build(engine); | |
| else if (IS_BROXTON(i915)) | |
| bxt_whitelist_build(engine); | |
| else if (IS_SKYLAKE(i915)) | |
| skl_whitelist_build(engine); | |
| else if (GRAPHICS_VER(i915) <= 8) | |
| ; | |
| else | |
| MISSING_CASE(GRAPHICS_VER(i915)); | |
| wa_init_finish(w); | |
| } | |
| void intel_engine_apply_whitelist(struct intel_engine_cs *engine) | |
| { | |
| const struct i915_wa_list *wal = &engine->whitelist; | |
| struct intel_uncore *uncore = engine->uncore; | |
| const u32 base = engine->mmio_base; | |
| struct i915_wa *wa; | |
| unsigned int i; | |
| if (!wal->count) | |
| return; | |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) | |
| intel_uncore_write(uncore, | |
| RING_FORCE_TO_NONPRIV(base, i), | |
| i915_mmio_reg_offset(wa->reg)); | |
| /* And clear the rest just in case of garbage */ | |
| for (; i < RING_MAX_NONPRIV_SLOTS; i++) | |
| intel_uncore_write(uncore, | |
| RING_FORCE_TO_NONPRIV(base, i), | |
| i915_mmio_reg_offset(RING_NOPID(base))); | |
| } | |
| /* | |
| * engine_fake_wa_init(), a place holder to program the registers | |
| * which are not part of an official workaround defined by the | |
| * hardware team. | |
| * Adding programming of those register inside workaround will | |
| * allow utilizing wa framework to proper application and verification. | |
| */ | |
| static void | |
| engine_fake_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) | |
| { | |
| u8 mocs_w, mocs_r; | |
| /* | |
| * RING_CMD_CCTL specifies the default MOCS entry that will be used | |
| * by the command streamer when executing commands that don't have | |
| * a way to explicitly specify a MOCS setting. The default should | |
| * usually reference whichever MOCS entry corresponds to uncached | |
| * behavior, although use of a WB cached entry is recommended by the | |
| * spec in certain circumstances on specific platforms. | |
| */ | |
| if (GRAPHICS_VER(engine->i915) >= 12) { | |
| mocs_r = engine->gt->mocs.uc_index; | |
| mocs_w = engine->gt->mocs.uc_index; | |
| if (HAS_L3_CCS_READ(engine->i915) && | |
| engine->class == COMPUTE_CLASS) { | |
| mocs_r = engine->gt->mocs.wb_index; | |
| /* | |
| * Even on the few platforms where MOCS 0 is a | |
| * legitimate table entry, it's never the correct | |
| * setting to use here; we can assume the MOCS init | |
| * just forgot to initialize wb_index. | |
| */ | |
| drm_WARN_ON(&engine->i915->drm, mocs_r == 0); | |
| } | |
| wa_masked_field_set(wal, | |
| RING_CMD_CCTL(engine->mmio_base), | |
| CMD_CCTL_MOCS_MASK, | |
| CMD_CCTL_MOCS_OVERRIDE(mocs_w, mocs_r)); | |
| } | |
| } | |
| static void | |
| rcs_engine_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| struct intel_gt *gt = engine->gt; | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || | |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) { | |
| /* Wa_22014600077 */ | |
| wa_mcr_masked_en(wal, GEN10_CACHE_MODE_SS, | |
| ENABLE_EU_COUNT_FOR_TDL_FLUSH); | |
| } | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || | |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0) || | |
| IS_DG2(i915)) { | |
| /* Wa_1509727124 */ | |
| wa_mcr_masked_en(wal, GEN10_SAMPLER_MODE, | |
| SC_DISABLE_POWER_OPTIMIZATION_EBB); | |
| } | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || | |
| IS_DG2(i915)) { | |
| /* Wa_22012856258 */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN2, | |
| GEN12_DISABLE_READ_SUPPRESSION); | |
| } | |
| if (IS_DG2(i915)) { | |
| /* | |
| * Wa_22010960976:dg2 | |
| * Wa_14013347512:dg2 | |
| */ | |
| wa_mcr_masked_dis(wal, XEHP_HDC_CHICKEN0, | |
| LSC_L1_FLUSH_CTL_3D_DATAPORT_FLUSH_EVENTS_MASK); | |
| } | |
| if (IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 70), IP_VER(12, 71)) || | |
| IS_DG2(i915)) { | |
| /* Wa_14015150844 */ | |
| wa_mcr_add(wal, XEHP_HDC_CHICKEN0, 0, | |
| REG_MASKED_FIELD_ENABLE(DIS_ATOMIC_CHAINING_TYPED_WRITES), | |
| 0, true); | |
| } | |
| if (IS_DG2(i915) || IS_ALDERLAKE_P(i915) || IS_ALDERLAKE_S(i915) || | |
| IS_DG1(i915) || IS_ROCKETLAKE(i915) || IS_TIGERLAKE(i915)) { | |
| /* | |
| * Wa_1606700617:tgl,dg1,adl-p | |
| * Wa_22010271021:tgl,rkl,dg1,adl-s,adl-p | |
| * Wa_14010826681:tgl,dg1,rkl,adl-p | |
| * Wa_18019627453:dg2 | |
| */ | |
| wa_masked_en(wal, | |
| GEN9_CS_DEBUG_MODE1, | |
| FF_DOP_CLOCK_GATE_DISABLE); | |
| } | |
| if (IS_ALDERLAKE_P(i915) || IS_ALDERLAKE_S(i915) || IS_DG1(i915) || | |
| IS_ROCKETLAKE(i915) || IS_TIGERLAKE(i915)) { | |
| /* Wa_1606931601:tgl,rkl,dg1,adl-s,adl-p */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN2, GEN12_DISABLE_EARLY_READ); | |
| /* | |
| * Wa_1407928979:tgl A* | |
| * Wa_18011464164:tgl[B0+],dg1[B0+] | |
| * Wa_22010931296:tgl[B0+],dg1[B0+] | |
| * Wa_14010919138:rkl,dg1,adl-s,adl-p | |
| */ | |
| wa_write_or(wal, GEN7_FF_THREAD_MODE, | |
| GEN12_FF_TESSELATION_DOP_GATE_DISABLE); | |
| /* Wa_1406941453:tgl,rkl,dg1,adl-s,adl-p */ | |
| wa_mcr_masked_en(wal, | |
| GEN10_SAMPLER_MODE, | |
| ENABLE_SMALLPL); | |
| } | |
| if (IS_ALDERLAKE_P(i915) || IS_ALDERLAKE_S(i915) || | |
| IS_ROCKETLAKE(i915) || IS_TIGERLAKE(i915)) { | |
| /* Wa_1409804808 */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN2, | |
| GEN12_PUSH_CONST_DEREF_HOLD_DIS); | |
| /* Wa_14010229206 */ | |
| wa_mcr_masked_en(wal, GEN9_ROW_CHICKEN4, GEN12_DISABLE_TDL_PUSH); | |
| } | |
| if (IS_ROCKETLAKE(i915) || IS_TIGERLAKE(i915) || IS_ALDERLAKE_P(i915)) { | |
| /* | |
| * Wa_1607297627 | |
| * | |
| * On TGL and RKL there are multiple entries for this WA in the | |
| * BSpec; some indicate this is an A0-only WA, others indicate | |
| * it applies to all steppings so we trust the "all steppings." | |
| */ | |
| wa_masked_en(wal, | |
| RING_PSMI_CTL(RENDER_RING_BASE), | |
| GEN12_WAIT_FOR_EVENT_POWER_DOWN_DISABLE | | |
| GEN8_RC_SEMA_IDLE_MSG_DISABLE); | |
| } | |
| if (GRAPHICS_VER(i915) == 11) { | |
| /* This is not an Wa. Enable for better image quality */ | |
| wa_masked_en(wal, | |
| _3D_CHICKEN3, | |
| _3D_CHICKEN3_AA_LINE_QUALITY_FIX_ENABLE); | |
| /* | |
| * Wa_1405543622:icl | |
| * Formerly known as WaGAPZPriorityScheme | |
| */ | |
| wa_write_or(wal, | |
| GEN8_GARBCNTL, | |
| GEN11_ARBITRATION_PRIO_ORDER_MASK); | |
| /* | |
| * Wa_1604223664:icl | |
| * Formerly known as WaL3BankAddressHashing | |
| */ | |
| wa_write_clr_set(wal, | |
| GEN8_GARBCNTL, | |
| GEN11_HASH_CTRL_EXCL_MASK, | |
| GEN11_HASH_CTRL_EXCL_BIT0); | |
| wa_write_clr_set(wal, | |
| GEN11_GLBLINVL, | |
| GEN11_BANK_HASH_ADDR_EXCL_MASK, | |
| GEN11_BANK_HASH_ADDR_EXCL_BIT0); | |
| /* | |
| * Wa_1405733216:icl | |
| * Formerly known as WaDisableCleanEvicts | |
| */ | |
| wa_mcr_write_or(wal, | |
| GEN8_L3SQCREG4, | |
| GEN11_LQSC_CLEAN_EVICT_DISABLE); | |
| /* Wa_1606682166:icl */ | |
| wa_write_or(wal, | |
| GEN7_SARCHKMD, | |
| GEN7_DISABLE_SAMPLER_PREFETCH); | |
| /* Wa_1409178092:icl */ | |
| wa_mcr_write_clr_set(wal, | |
| GEN11_SCRATCH2, | |
| GEN11_COHERENT_PARTIAL_WRITE_MERGE_ENABLE, | |
| 0); | |
| /* WaEnable32PlaneMode:icl */ | |
| wa_masked_en(wal, GEN9_CSFE_CHICKEN1_RCS, | |
| GEN11_ENABLE_32_PLANE_MODE); | |
| /* | |
| * Wa_1408767742:icl[a2..forever],ehl[all] | |
| * Wa_1605460711:icl[a0..c0] | |
| */ | |
| wa_write_or(wal, | |
| GEN7_FF_THREAD_MODE, | |
| GEN12_FF_TESSELATION_DOP_GATE_DISABLE); | |
| /* Wa_22010271021 */ | |
| wa_masked_en(wal, | |
| GEN9_CS_DEBUG_MODE1, | |
| FF_DOP_CLOCK_GATE_DISABLE); | |
| } | |
| /* | |
| * Intel platforms that support fine-grained preemption (i.e., gen9 and | |
| * beyond) allow the kernel-mode driver to choose between two different | |
| * options for controlling preemption granularity and behavior. | |
| * | |
| * Option 1 (hardware default): | |
| * Preemption settings are controlled in a global manner via | |
| * kernel-only register CS_DEBUG_MODE1 (0x20EC). Any granularity | |
| * and settings chosen by the kernel-mode driver will apply to all | |
| * userspace clients. | |
| * | |
| * Option 2: | |
| * Preemption settings are controlled on a per-context basis via | |
| * register CS_CHICKEN1 (0x2580). CS_CHICKEN1 is saved/restored on | |
| * context switch and is writable by userspace (e.g., via | |
| * MI_LOAD_REGISTER_IMMEDIATE instructions placed in a batch buffer) | |
| * which allows different userspace drivers/clients to select | |
| * different settings, or to change those settings on the fly in | |
| * response to runtime needs. This option was known by name | |
| * "FtrPerCtxtPreemptionGranularityControl" at one time, although | |
| * that name is somewhat misleading as other non-granularity | |
| * preemption settings are also impacted by this decision. | |
| * | |
| * On Linux, our policy has always been to let userspace drivers | |
| * control preemption granularity/settings (Option 2). This was | |
| * originally mandatory on gen9 to prevent ABI breakage (old gen9 | |
| * userspace developed before object-level preemption was enabled would | |
| * not behave well if i915 were to go with Option 1 and enable that | |
| * preemption in a global manner). On gen9 each context would have | |
| * object-level preemption disabled by default (see | |
| * WaDisable3DMidCmdPreemption in gen9_ctx_workarounds_init), but | |
| * userspace drivers could opt-in to object-level preemption as they | |
| * saw fit. For post-gen9 platforms, we continue to utilize Option 2; | |
| * even though it is no longer necessary for ABI compatibility when | |
| * enabling a new platform, it does ensure that userspace will be able | |
| * to implement any workarounds that show up requiring temporary | |
| * adjustments to preemption behavior at runtime. | |
| * | |
| * Notes/Workarounds: | |
| * - Wa_14015141709: On DG2 and early steppings of MTL, | |
| * CS_CHICKEN1[0] does not disable object-level preemption as | |
| * it is supposed to (nor does CS_DEBUG_MODE1[0] if we had been | |
| * using Option 1). Effectively this means userspace is unable | |
| * to disable object-level preemption on these platforms/steppings | |
| * despite the setting here. | |
| * | |
| * - Wa_16013994831: May require that userspace program | |
| * CS_CHICKEN1[10] when certain runtime conditions are true. | |
| * Userspace requires Option 2 to be in effect for their update of | |
| * CS_CHICKEN1[10] to be effective. | |
| * | |
| * Other workarounds may appear in the future that will also require | |
| * Option 2 behavior to allow proper userspace implementation. | |
| */ | |
| if (GRAPHICS_VER(i915) >= 9) | |
| wa_masked_en(wal, | |
| GEN7_FF_SLICE_CS_CHICKEN1, | |
| GEN9_FFSC_PERCTX_PREEMPT_CTRL); | |
| if (IS_SKYLAKE(i915) || | |
| IS_KABYLAKE(i915) || | |
| IS_COFFEELAKE(i915) || | |
| IS_COMETLAKE(i915)) { | |
| /* WaEnableGapsTsvCreditFix:skl,kbl,cfl */ | |
| wa_write_or(wal, | |
| GEN8_GARBCNTL, | |
| GEN9_GAPS_TSV_CREDIT_DISABLE); | |
| } | |
| if (IS_BROXTON(i915)) { | |
| /* WaDisablePooledEuLoadBalancingFix:bxt */ | |
| wa_masked_en(wal, | |
| FF_SLICE_CS_CHICKEN2, | |
| GEN9_POOLED_EU_LOAD_BALANCING_FIX_DISABLE); | |
| } | |
| if (GRAPHICS_VER(i915) == 9) { | |
| /* WaContextSwitchWithConcurrentTLBInvalidate:skl,bxt,kbl,glk,cfl */ | |
| wa_masked_en(wal, | |
| GEN9_CSFE_CHICKEN1_RCS, | |
| GEN9_PREEMPT_GPGPU_SYNC_SWITCH_DISABLE); | |
| /* WaEnableLbsSlaRetryTimerDecrement:skl,bxt,kbl,glk,cfl */ | |
| wa_mcr_write_or(wal, | |
| BDW_SCRATCH1, | |
| GEN9_LBS_SLA_RETRY_TIMER_DECREMENT_ENABLE); | |
| /* WaProgramL3SqcReg1DefaultForPerf:bxt,glk */ | |
| if (IS_GEN9_LP(i915)) | |
| wa_mcr_write_clr_set(wal, | |
| GEN8_L3SQCREG1, | |
| L3_PRIO_CREDITS_MASK, | |
| L3_GENERAL_PRIO_CREDITS(62) | | |
| L3_HIGH_PRIO_CREDITS(2)); | |
| /* WaOCLCoherentLineFlush:skl,bxt,kbl,cfl */ | |
| wa_mcr_write_or(wal, | |
| GEN8_L3SQCREG4, | |
| GEN8_LQSC_FLUSH_COHERENT_LINES); | |
| /* Disable atomics in L3 to prevent unrecoverable hangs */ | |
| wa_write_clr_set(wal, GEN9_SCRATCH_LNCF1, | |
| GEN9_LNCF_NONIA_COHERENT_ATOMICS_ENABLE, 0); | |
| wa_mcr_write_clr_set(wal, GEN8_L3SQCREG4, | |
| GEN8_LQSQ_NONIA_COHERENT_ATOMICS_ENABLE, 0); | |
| wa_mcr_write_clr_set(wal, GEN9_SCRATCH1, | |
| EVICTION_PERF_FIX_ENABLE, 0); | |
| } | |
| if (IS_HASWELL(i915)) { | |
| /* WaSampleCChickenBitEnable:hsw */ | |
| wa_masked_en(wal, | |
| HSW_HALF_SLICE_CHICKEN3, HSW_SAMPLE_C_PERFORMANCE); | |
| wa_masked_dis(wal, | |
| CACHE_MODE_0_GEN7, | |
| /* enable HiZ Raw Stall Optimization */ | |
| HIZ_RAW_STALL_OPT_DISABLE); | |
| } | |
| if (IS_VALLEYVIEW(i915)) { | |
| /* WaDisableEarlyCull:vlv */ | |
| wa_masked_en(wal, | |
| _3D_CHICKEN3, | |
| _3D_CHICKEN_SF_DISABLE_OBJEND_CULL); | |
| /* | |
| * WaVSThreadDispatchOverride:ivb,vlv | |
| * | |
| * This actually overrides the dispatch | |
| * mode for all thread types. | |
| */ | |
| wa_write_clr_set(wal, | |
| GEN7_FF_THREAD_MODE, | |
| GEN7_FF_SCHED_MASK, | |
| GEN7_FF_TS_SCHED_HW | | |
| GEN7_FF_VS_SCHED_HW | | |
| GEN7_FF_DS_SCHED_HW); | |
| /* WaPsdDispatchEnable:vlv */ | |
| /* WaDisablePSDDualDispatchEnable:vlv */ | |
| wa_masked_en(wal, | |
| GEN7_HALF_SLICE_CHICKEN1, | |
| GEN7_MAX_PS_THREAD_DEP | | |
| GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE); | |
| } | |
| if (IS_IVYBRIDGE(i915)) { | |
| /* WaDisableEarlyCull:ivb */ | |
| wa_masked_en(wal, | |
| _3D_CHICKEN3, | |
| _3D_CHICKEN_SF_DISABLE_OBJEND_CULL); | |
| if (0) { /* causes HiZ corruption on ivb:gt1 */ | |
| /* enable HiZ Raw Stall Optimization */ | |
| wa_masked_dis(wal, | |
| CACHE_MODE_0_GEN7, | |
| HIZ_RAW_STALL_OPT_DISABLE); | |
| } | |
| /* | |
| * WaVSThreadDispatchOverride:ivb,vlv | |
| * | |
| * This actually overrides the dispatch | |
| * mode for all thread types. | |
| */ | |
| wa_write_clr_set(wal, | |
| GEN7_FF_THREAD_MODE, | |
| GEN7_FF_SCHED_MASK, | |
| GEN7_FF_TS_SCHED_HW | | |
| GEN7_FF_VS_SCHED_HW | | |
| GEN7_FF_DS_SCHED_HW); | |
| /* WaDisablePSDDualDispatchEnable:ivb */ | |
| if (INTEL_INFO(i915)->gt == 1) | |
| wa_masked_en(wal, | |
| GEN7_HALF_SLICE_CHICKEN1, | |
| GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE); | |
| } | |
| if (GRAPHICS_VER(i915) == 7) { | |
| /* WaBCSVCSTlbInvalidationMode:ivb,vlv,hsw */ | |
| wa_masked_en(wal, | |
| RING_MODE_GEN7(RENDER_RING_BASE), | |
| GFX_TLB_INVALIDATE_EXPLICIT | GFX_REPLAY_MODE); | |
| /* | |
| * BSpec recommends 8x4 when MSAA is used, | |
| * however in practice 16x4 seems fastest. | |
| * | |
| * Note that PS/WM thread counts depend on the WIZ hashing | |
| * disable bit, which we don't touch here, but it's good | |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). | |
| */ | |
| wa_masked_field_set(wal, | |
| GEN7_GT_MODE, | |
| GEN6_WIZ_HASHING_MASK, | |
| GEN6_WIZ_HASHING_16x4); | |
| } | |
| if (IS_GRAPHICS_VER(i915, 6, 7)) | |
| /* | |
| * We need to disable the AsyncFlip performance optimisations in | |
| * order to use MI_WAIT_FOR_EVENT within the CS. It should | |
| * already be programmed to '1' on all products. | |
| * | |
| * WaDisableAsyncFlipPerfMode:snb,ivb,hsw,vlv | |
| */ | |
| wa_masked_en(wal, | |
| RING_MI_MODE(RENDER_RING_BASE), | |
| ASYNC_FLIP_PERF_DISABLE); | |
| if (GRAPHICS_VER(i915) == 6) { | |
| /* | |
| * Required for the hardware to program scanline values for | |
| * waiting | |
| * WaEnableFlushTlbInvalidationMode:snb | |
| */ | |
| wa_masked_en(wal, | |
| GFX_MODE, | |
| GFX_TLB_INVALIDATE_EXPLICIT); | |
| /* WaDisableHiZPlanesWhenMSAAEnabled:snb */ | |
| wa_masked_en(wal, | |
| _3D_CHICKEN, | |
| _3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB); | |
| wa_masked_en(wal, | |
| _3D_CHICKEN3, | |
| /* WaStripsFansDisableFastClipPerformanceFix:snb */ | |
| _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL | | |
| /* | |
| * Bspec says: | |
| * "This bit must be set if 3DSTATE_CLIP clip mode is set | |
| * to normal and 3DSTATE_SF number of SF output attributes | |
| * is more than 16." | |
| */ | |
| _3D_CHICKEN3_SF_DISABLE_PIPELINED_ATTR_FETCH); | |
| /* | |
| * BSpec recommends 8x4 when MSAA is used, | |
| * however in practice 16x4 seems fastest. | |
| * | |
| * Note that PS/WM thread counts depend on the WIZ hashing | |
| * disable bit, which we don't touch here, but it's good | |
| * to keep in mind (see 3DSTATE_PS and 3DSTATE_WM). | |
| */ | |
| wa_masked_field_set(wal, | |
| GEN6_GT_MODE, | |
| GEN6_WIZ_HASHING_MASK, | |
| GEN6_WIZ_HASHING_16x4); | |
| /* | |
| * From the Sandybridge PRM, volume 1 part 3, page 24: | |
| * "If this bit is set, STCunit will have LRA as replacement | |
| * policy. [...] This bit must be reset. LRA replacement | |
| * policy is not supported." | |
| */ | |
| wa_masked_dis(wal, | |
| CACHE_MODE_0, | |
| CM0_STC_EVICT_DISABLE_LRA_SNB); | |
| } | |
| if (IS_GRAPHICS_VER(i915, 4, 6)) | |
| /* WaTimedSingleVertexDispatch:cl,bw,ctg,elk,ilk,snb */ | |
| wa_add(wal, RING_MI_MODE(RENDER_RING_BASE), | |
| 0, REG_MASKED_FIELD_ENABLE(VS_TIMER_DISPATCH), | |
| /* XXX bit doesn't stick on Broadwater */ | |
| IS_I965G(i915) ? 0 : VS_TIMER_DISPATCH, true); | |
| if (GRAPHICS_VER(i915) == 4) | |
| /* | |
| * Disable CONSTANT_BUFFER before it is loaded from the context | |
| * image. For as it is loaded, it is executed and the stored | |
| * address may no longer be valid, leading to a GPU hang. | |
| * | |
| * This imposes the requirement that userspace reload their | |
| * CONSTANT_BUFFER on every batch, fortunately a requirement | |
| * they are already accustomed to from before contexts were | |
| * enabled. | |
| */ | |
| wa_add(wal, ECOSKPD(RENDER_RING_BASE), | |
| 0, REG_MASKED_FIELD_ENABLE(ECO_CONSTANT_BUFFER_SR_DISABLE), | |
| 0 /* XXX bit doesn't stick on Broadwater */, | |
| true); | |
| } | |
| static void | |
| xcs_engine_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| /* WaKBLVECSSemaphoreWaitPoll:kbl */ | |
| if (IS_KABYLAKE(i915) && IS_GRAPHICS_STEP(i915, STEP_A0, STEP_F0)) { | |
| wa_write(wal, | |
| RING_SEMA_WAIT_POLL(engine->mmio_base), | |
| 1); | |
| } | |
| /* Wa_16018031267, Wa_16018063123 */ | |
| if (NEEDS_FASTCOLOR_BLT_WABB(engine)) | |
| wa_masked_field_set(wal, ECOSKPD(engine->mmio_base), | |
| XEHP_BLITTER_SCHEDULING_MODE_MASK, | |
| XEHP_BLITTER_ROUND_ROBIN_MODE); | |
| } | |
| static void | |
| ccs_engine_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) | |
| { | |
| /* boilerplate for any CCS engine workaround */ | |
| } | |
| /* | |
| * The bspec performance guide has recommended MMIO tuning settings. These | |
| * aren't truly "workarounds" but we want to program them with the same | |
| * workaround infrastructure to ensure that they're automatically added to | |
| * the GuC save/restore lists, re-applied at the right times, and checked for | |
| * any conflicting programming requested by real workarounds. | |
| * | |
| * Programming settings should be added here only if their registers are not | |
| * part of an engine's register state context. If a register is part of a | |
| * context, then any tuning settings should be programmed in an appropriate | |
| * function invoked by __intel_engine_init_ctx_wa(). | |
| */ | |
| static void | |
| add_render_compute_tuning_settings(struct intel_gt *gt, | |
| struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = gt->i915; | |
| if (IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 70), IP_VER(12, 74)) || IS_DG2(i915)) | |
| wa_mcr_write_clr_set(wal, RT_CTRL, STACKID_CTRL, STACKID_CTRL_512); | |
| /* | |
| * This tuning setting proves beneficial only on ATS-M designs; the | |
| * default "age based" setting is optimal on regular DG2 and other | |
| * platforms. | |
| */ | |
| if (INTEL_INFO(i915)->tuning_thread_rr_after_dep) | |
| wa_mcr_masked_field_set(wal, GEN9_ROW_CHICKEN4, THREAD_EX_ARB_MODE, | |
| THREAD_EX_ARB_MODE_RR_AFTER_DEP); | |
| if (GRAPHICS_VER(i915) == 12 && GRAPHICS_VER_FULL(i915) < IP_VER(12, 55)) | |
| wa_write_clr(wal, GEN8_GARBCNTL, GEN12_BUS_HASH_CTL_BIT_EXC); | |
| } | |
| static void ccs_engine_wa_mode(struct intel_engine_cs *engine, struct i915_wa_list *wal) | |
| { | |
| struct intel_gt *gt = engine->gt; | |
| u32 mode; | |
| if (!IS_DG2(gt->i915)) | |
| return; | |
| /* | |
| * Wa_14019159160: This workaround, along with others, leads to | |
| * significant challenges in utilizing load balancing among the | |
| * CCS slices. Consequently, an architectural decision has been | |
| * made to completely disable automatic CCS load balancing. | |
| */ | |
| wa_masked_en(wal, GEN12_RCU_MODE, XEHP_RCU_MODE_FIXED_SLICE_CCS_MODE); | |
| /* | |
| * After having disabled automatic load balancing we need to | |
| * assign all slices to a single CCS. We will call it CCS mode 1 | |
| */ | |
| mode = intel_gt_apply_ccs_mode(gt); | |
| wa_masked_en(wal, XEHP_CCS_MODE, mode); | |
| } | |
| /* | |
| * The workarounds in this function apply to shared registers in | |
| * the general render reset domain that aren't tied to a | |
| * specific engine. Since all render+compute engines get reset | |
| * together, and the contents of these registers are lost during | |
| * the shared render domain reset, we'll define such workarounds | |
| * here and then add them to just a single RCS or CCS engine's | |
| * workaround list (whichever engine has the XXXX flag). | |
| */ | |
| static void | |
| general_render_compute_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) | |
| { | |
| struct drm_i915_private *i915 = engine->i915; | |
| struct intel_gt *gt = engine->gt; | |
| add_render_compute_tuning_settings(gt, wal); | |
| if (GRAPHICS_VER(i915) >= 11) { | |
| /* This is not a Wa (although referred to as | |
| * WaSetInidrectStateOverride in places), this allows | |
| * applications that reference sampler states through | |
| * the BindlessSamplerStateBaseAddress to have their | |
| * border color relative to DynamicStateBaseAddress | |
| * rather than BindlessSamplerStateBaseAddress. | |
| * | |
| * Otherwise SAMPLER_STATE border colors have to be | |
| * copied in multiple heaps (DynamicStateBaseAddress & | |
| * BindlessSamplerStateBaseAddress) | |
| * | |
| * BSpec: 46052 | |
| */ | |
| wa_mcr_masked_en(wal, | |
| GEN10_SAMPLER_MODE, | |
| GEN11_INDIRECT_STATE_BASE_ADDR_OVERRIDE); | |
| } | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_B0, STEP_FOREVER) || | |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_B0, STEP_FOREVER) || | |
| IS_GFX_GT_IP_RANGE(gt, IP_VER(12, 74), IP_VER(12, 74))) { | |
| /* Wa_14017856879 */ | |
| wa_mcr_masked_en(wal, GEN9_ROW_CHICKEN3, MTL_DISABLE_FIX_FOR_EOT_FLUSH); | |
| /* Wa_14020495402 */ | |
| wa_mcr_masked_en(wal, GEN8_ROW_CHICKEN2, XELPG_DISABLE_TDL_SVHS_GATING); | |
| } | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || | |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) | |
| /* | |
| * Wa_14017066071 | |
| * Wa_14017654203 | |
| */ | |
| wa_mcr_masked_en(wal, GEN10_SAMPLER_MODE, | |
| MTL_DISABLE_SAMPLER_SC_OOO); | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0)) | |
| /* Wa_22015279794 */ | |
| wa_mcr_masked_en(wal, GEN10_CACHE_MODE_SS, | |
| DISABLE_PREFETCH_INTO_IC); | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || | |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0) || | |
| IS_DG2(i915)) { | |
| /* Wa_22013037850 */ | |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0_UDW, | |
| DISABLE_128B_EVICTION_COMMAND_UDW); | |
| /* Wa_18017747507 */ | |
| wa_masked_en(wal, VFG_PREEMPTION_CHICKEN, POLYGON_TRIFAN_LINELOOP_DISABLE); | |
| } | |
| if (IS_GFX_GT_IP_STEP(gt, IP_VER(12, 70), STEP_A0, STEP_B0) || | |
| IS_GFX_GT_IP_STEP(gt, IP_VER(12, 71), STEP_A0, STEP_B0) || | |
| IS_DG2(i915)) { | |
| /* Wa_22014226127 */ | |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0, DISABLE_D8_D16_COASLESCE); | |
| } | |
| if (IS_DG2(i915)) { | |
| /* Wa_14015227452:dg2,pvc */ | |
| wa_mcr_masked_en(wal, GEN9_ROW_CHICKEN4, XEHP_DIS_BBL_SYSPIPE); | |
| /* | |
| * Wa_16011620976:dg2_g11 | |
| * Wa_22015475538:dg2 | |
| */ | |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0_UDW, DIS_CHAIN_2XSIMD8); | |
| /* Wa_18028616096 */ | |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0_UDW, UGM_FRAGMENT_THRESHOLD_TO_3); | |
| } | |
| if (IS_DG2_G11(i915)) { | |
| /* | |
| * Wa_22012826095:dg2 | |
| * Wa_22013059131:dg2 | |
| */ | |
| wa_mcr_write_clr_set(wal, LSC_CHICKEN_BIT_0_UDW, | |
| MAXREQS_PER_BANK, | |
| REG_FIELD_PREP(MAXREQS_PER_BANK, 2)); | |
| /* Wa_22013059131:dg2 */ | |
| wa_mcr_write_or(wal, LSC_CHICKEN_BIT_0, | |
| FORCE_1_SUB_MESSAGE_PER_FRAGMENT); | |
| /* | |
| * Wa_22012654132 | |
| * | |
| * Note that register 0xE420 is write-only and cannot be read | |
| * back for verification on DG2 (due to Wa_14012342262), so | |
| * we need to explicitly skip the readback. | |
| */ | |
| wa_mcr_add(wal, GEN10_CACHE_MODE_SS, 0, | |
| REG_MASKED_FIELD_ENABLE(ENABLE_PREFETCH_INTO_IC), | |
| 0 /* write-only, so skip validation */, | |
| true); | |
| } | |
| } | |
| static void | |
| engine_init_workarounds(struct intel_engine_cs *engine, struct i915_wa_list *wal) | |
| { | |
| if (GRAPHICS_VER(engine->i915) < 4) | |
| return; | |
| engine_fake_wa_init(engine, wal); | |
| /* | |
| * These are common workarounds that just need to applied | |
| * to a single RCS/CCS engine's workaround list since | |
| * they're reset as part of the general render domain reset. | |
| */ | |
| if (engine->flags & I915_ENGINE_FIRST_RENDER_COMPUTE) { | |
| general_render_compute_wa_init(engine, wal); | |
| ccs_engine_wa_mode(engine, wal); | |
| } | |
| if (engine->class == COMPUTE_CLASS) | |
| ccs_engine_wa_init(engine, wal); | |
| else if (engine->class == RENDER_CLASS) | |
| rcs_engine_wa_init(engine, wal); | |
| else | |
| xcs_engine_wa_init(engine, wal); | |
| } | |
| void intel_engine_init_workarounds(struct intel_engine_cs *engine) | |
| { | |
| struct i915_wa_list *wal = &engine->wa_list; | |
| wa_init_start(wal, engine->gt, "engine", engine->name); | |
| engine_init_workarounds(engine, wal); | |
| wa_init_finish(wal); | |
| } | |
| void intel_engine_apply_workarounds(struct intel_engine_cs *engine) | |
| { | |
| wa_list_apply(&engine->wa_list); | |
| } | |
| static const struct i915_mmio_range mcr_ranges_gen8[] = { | |
| { .start = 0x5500, .end = 0x55ff }, | |
| { .start = 0x7000, .end = 0x7fff }, | |
| { .start = 0x9400, .end = 0x97ff }, | |
| { .start = 0xb000, .end = 0xb3ff }, | |
| { .start = 0xe000, .end = 0xe7ff }, | |
| {}, | |
| }; | |
| static const struct i915_mmio_range mcr_ranges_gen12[] = { | |
| { .start = 0x8150, .end = 0x815f }, | |
| { .start = 0x9520, .end = 0x955f }, | |
| { .start = 0xb100, .end = 0xb3ff }, | |
| { .start = 0xde80, .end = 0xe8ff }, | |
| { .start = 0x24a00, .end = 0x24a7f }, | |
| {}, | |
| }; | |
| static const struct i915_mmio_range mcr_ranges_xehp[] = { | |
| { .start = 0x4000, .end = 0x4aff }, | |
| { .start = 0x5200, .end = 0x52ff }, | |
| { .start = 0x5400, .end = 0x7fff }, | |
| { .start = 0x8140, .end = 0x815f }, | |
| { .start = 0x8c80, .end = 0x8dff }, | |
| { .start = 0x94d0, .end = 0x955f }, | |
| { .start = 0x9680, .end = 0x96ff }, | |
| { .start = 0xb000, .end = 0xb3ff }, | |
| { .start = 0xc800, .end = 0xcfff }, | |
| { .start = 0xd800, .end = 0xd8ff }, | |
| { .start = 0xdc00, .end = 0xffff }, | |
| { .start = 0x17000, .end = 0x17fff }, | |
| { .start = 0x24a00, .end = 0x24a7f }, | |
| {}, | |
| }; | |
| static bool mcr_range(struct drm_i915_private *i915, u32 offset) | |
| { | |
| const struct i915_mmio_range *mcr_ranges; | |
| int i; | |
| if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 55)) | |
| mcr_ranges = mcr_ranges_xehp; | |
| else if (GRAPHICS_VER(i915) >= 12) | |
| mcr_ranges = mcr_ranges_gen12; | |
| else if (GRAPHICS_VER(i915) >= 8) | |
| mcr_ranges = mcr_ranges_gen8; | |
| else | |
| return false; | |
| /* | |
| * Registers in these ranges are affected by the MCR selector | |
| * which only controls CPU initiated MMIO. Routing does not | |
| * work for CS access so we cannot verify them on this path. | |
| */ | |
| for (i = 0; mcr_ranges[i].start; i++) | |
| if (offset >= mcr_ranges[i].start && | |
| offset <= mcr_ranges[i].end) | |
| return true; | |
| return false; | |
| } | |
| static int | |
| wa_list_srm(struct i915_request *rq, | |
| const struct i915_wa_list *wal, | |
| struct i915_vma *vma) | |
| { | |
| struct drm_i915_private *i915 = rq->i915; | |
| unsigned int i, count = 0; | |
| const struct i915_wa *wa; | |
| u32 srm, *cs; | |
| srm = MI_STORE_REGISTER_MEM | MI_SRM_LRM_GLOBAL_GTT; | |
| if (GRAPHICS_VER(i915) >= 8) | |
| srm++; | |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { | |
| if (!mcr_range(i915, i915_mmio_reg_offset(wa->reg))) | |
| count++; | |
| } | |
| cs = intel_ring_begin(rq, 4 * count); | |
| if (IS_ERR(cs)) | |
| return PTR_ERR(cs); | |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { | |
| u32 offset = i915_mmio_reg_offset(wa->reg); | |
| if (mcr_range(i915, offset)) | |
| continue; | |
| *cs++ = srm; | |
| *cs++ = offset; | |
| *cs++ = i915_ggtt_offset(vma) + sizeof(u32) * i; | |
| *cs++ = 0; | |
| } | |
| intel_ring_advance(rq, cs); | |
| return 0; | |
| } | |
| static int engine_wa_list_verify(struct intel_context *ce, | |
| const struct i915_wa_list * const wal, | |
| const char *from) | |
| { | |
| const struct i915_wa *wa; | |
| struct i915_request *rq; | |
| struct i915_vma *vma; | |
| struct i915_gem_ww_ctx ww; | |
| unsigned int i; | |
| u32 *results; | |
| int err; | |
| if (!wal->count) | |
| return 0; | |
| vma = __vm_create_scratch_for_read(&ce->engine->gt->ggtt->vm, | |
| wal->count * sizeof(u32)); | |
| if (IS_ERR(vma)) | |
| return PTR_ERR(vma); | |
| intel_engine_pm_get(ce->engine); | |
| i915_gem_ww_ctx_init(&ww, false); | |
| retry: | |
| err = i915_gem_object_lock(vma->obj, &ww); | |
| if (err == 0) | |
| err = intel_context_pin_ww(ce, &ww); | |
| if (err) | |
| goto err_pm; | |
| err = i915_vma_pin_ww(vma, &ww, 0, 0, | |
| i915_vma_is_ggtt(vma) ? PIN_GLOBAL : PIN_USER); | |
| if (err) | |
| goto err_unpin; | |
| rq = i915_request_create(ce); | |
| if (IS_ERR(rq)) { | |
| err = PTR_ERR(rq); | |
| goto err_vma; | |
| } | |
| err = i915_vma_move_to_active(vma, rq, EXEC_OBJECT_WRITE); | |
| if (err == 0) | |
| err = wa_list_srm(rq, wal, vma); | |
| i915_request_get(rq); | |
| if (err) | |
| i915_request_set_error_once(rq, err); | |
| i915_request_add(rq); | |
| if (err) | |
| goto err_rq; | |
| if (i915_request_wait(rq, 0, HZ / 5) < 0) { | |
| err = -ETIME; | |
| goto err_rq; | |
| } | |
| results = i915_gem_object_pin_map(vma->obj, I915_MAP_WB); | |
| if (IS_ERR(results)) { | |
| err = PTR_ERR(results); | |
| goto err_rq; | |
| } | |
| err = 0; | |
| for (i = 0, wa = wal->list; i < wal->count; i++, wa++) { | |
| if (mcr_range(rq->i915, i915_mmio_reg_offset(wa->reg))) | |
| continue; | |
| if (!wa_verify(wal->gt, wa, results[i], wal->name, from)) | |
| err = -ENXIO; | |
| } | |
| i915_gem_object_unpin_map(vma->obj); | |
| err_rq: | |
| i915_request_put(rq); | |
| err_vma: | |
| i915_vma_unpin(vma); | |
| err_unpin: | |
| intel_context_unpin(ce); | |
| err_pm: | |
| if (err == -EDEADLK) { | |
| err = i915_gem_ww_ctx_backoff(&ww); | |
| if (!err) | |
| goto retry; | |
| } | |
| i915_gem_ww_ctx_fini(&ww); | |
| intel_engine_pm_put(ce->engine); | |
| i915_vma_put(vma); | |
| return err; | |
| } | |
| int intel_engine_verify_workarounds(struct intel_engine_cs *engine, | |
| const char *from) | |
| { | |
| return engine_wa_list_verify(engine->kernel_context, | |
| &engine->wa_list, | |
| from); | |
| } | |
| #if IS_ENABLED(CONFIG_DRM_I915_SELFTEST) | |
| #include "selftest_workarounds.c" | |
| #endif |