| // SPDX-License-Identifier: GPL-2.0 |
| // SPDX-FileCopyrightText: Copyright (c) 2026 NVIDIA CORPORATION & AFFILIATES. All rights reserved. |
| |
| //! FSP (Foundation Security Processor) interface for Hopper/Blackwell GPUs. |
| //! |
| //! Hopper/Blackwell use a simplified firmware boot sequence: FMC, then FSP, then GSP. |
| //! Unlike Turing/Ampere/Ada, there is no SEC2 (Security Engine 2) usage. |
| //! FSP handles secure boot directly using FMC firmware and Chain of Trust. |
| |
| use kernel::{ |
| device, |
| dma::Coherent, |
| io::poll::read_poll_timeout, |
| num::TryIntoBounded, |
| prelude::*, |
| ptr::{ |
| Alignable, |
| Alignment, // |
| }, |
| sizes::SZ_2M, |
| time::Delta, |
| transmute::{ |
| AsBytes, |
| FromBytes, // |
| }, |
| }; |
| |
| use crate::{ |
| driver::Bar0, |
| falcon::{ |
| fsp::Fsp as FspEngine, |
| Falcon, // |
| }, |
| fb::FbSizes, |
| firmware::fsp::{ |
| FmcSignatures, |
| FspFirmware, // |
| }, |
| gpu::Chipset, |
| gsp::{ |
| GspFmcBootParams, |
| GspFwWprMeta, |
| LibosMemoryRegionInitArgument, // |
| }, |
| mctp::{ |
| MctpHeader, |
| NvdmHeader, |
| NvdmType, // |
| }, |
| num, |
| regs, // |
| }; |
| |
| mod hal; |
| |
| /// PRC message sub-command. |
| #[derive(Debug, Clone, Copy, PartialEq, Eq)] |
| #[repr(u8)] |
| enum PrcMessageSubcmd { |
| /// Read a PRC knob value. |
| Read = 0x0c, |
| } |
| |
| impl From<PrcMessageSubcmd> for u8 { |
| fn from(value: PrcMessageSubcmd) -> Self { |
| value as u8 |
| } |
| } |
| |
| /// PRC object identifier. |
| #[derive(Debug, Clone, Copy, PartialEq, Eq)] |
| #[repr(u8)] |
| enum PrcObjectId { |
| /// vGPU mode configuration knob. |
| VgpuMode = 0x29, |
| } |
| |
| impl From<PrcObjectId> for u8 { |
| fn from(value: PrcObjectId) -> Self { |
| value as u8 |
| } |
| } |
| |
| kernel::impl_flags!( |
| /// PRC request flags. |
| #[derive(Clone, Copy, Default, PartialEq, Eq)] |
| struct PrcFlags(u8); |
| |
| /// Individual PRC request flag. |
| #[derive(Clone, Copy, PartialEq, Eq)] |
| enum PrcFlag { |
| /// Request the active knob value for the current boot. |
| Active = 1 << 1, |
| } |
| ); |
| |
| /// vGPU operating mode as reported by FSP via the PRC protocol. |
| #[derive(Debug, Clone, Copy, PartialEq, Eq)] |
| pub(crate) enum VgpuMode { |
| /// vGPU support is disabled on this GPU. |
| Disabled, |
| /// vGPU support is enabled on this GPU. |
| Enabled, |
| } |
| |
| /// FSP command response payload (`NVDM_PAYLOAD_COMMAND_RESPONSE`). |
| #[repr(C, packed)] |
| #[derive(Clone, Copy)] |
| struct NvdmPayloadCommandResponse { |
| task_id: u32, |
| command_nvdm_type: u32, |
| error_code: u32, |
| } |
| |
| /// PRC message payload. |
| /// |
| /// Sent to FSP to query or modify a device configuration knob. |
| #[repr(C, packed)] |
| #[derive(Clone, Copy)] |
| struct NvdmPayloadPrc { |
| sub_message_id: u8, |
| flags: u8, |
| object_id: u8, |
| reserved: u8, |
| } |
| |
| impl NvdmPayloadPrc { |
| /// Constructs a PRC payload from typed protocol fields. |
| fn new(subcmd: PrcMessageSubcmd, object_id: PrcObjectId, flags: PrcFlags) -> Self { |
| Self { |
| sub_message_id: subcmd.into(), |
| flags: flags.into(), |
| object_id: object_id.into(), |
| reserved: 0, |
| } |
| } |
| } |
| |
| // SAFETY: NvdmPayloadPrc is a packed C struct with only integral fields. |
| unsafe impl AsBytes for NvdmPayloadPrc {} |
| |
| /// PRC response payload containing the knob state value. |
| #[repr(C, packed)] |
| #[derive(Clone, Copy)] |
| struct NvdmPayloadPrcResponse { |
| value_low: u8, |
| value_high: u8, |
| reserved1: u8, |
| reserved2: u8, |
| } |
| |
| impl NvdmPayloadPrcResponse { |
| /// Returns the PRC knob value as a little-endian 16-bit integer. |
| fn value(self) -> u16 { |
| u16::from(self.value_low) | (u16::from(self.value_high) << 8) |
| } |
| } |
| |
| impl TryFrom<NvdmPayloadPrcResponse> for VgpuMode { |
| type Error = kernel::error::Error; |
| |
| fn try_from(value: NvdmPayloadPrcResponse) -> Result<Self> { |
| match value.value() { |
| 0 => Ok(VgpuMode::Disabled), |
| 1 => Ok(VgpuMode::Enabled), |
| _ => Err(EINVAL), |
| } |
| } |
| } |
| |
| /// Common MCTP and NVDM headers shared by all FSP messages. |
| #[repr(C, packed)] |
| #[derive(Clone, Copy)] |
| struct FspMessageHeader { |
| mctp_header: MctpHeader, |
| nvdm_header: NvdmHeader, |
| } |
| |
| // SAFETY: FspMessageHeader is a packed C struct with only integral fields. |
| unsafe impl AsBytes for FspMessageHeader {} |
| |
| // SAFETY: FspMessageHeader is a packed C struct with only integral fields. |
| unsafe impl FromBytes for FspMessageHeader {} |
| |
| impl FspMessageHeader { |
| /// Construct a standard FSP message header for the given NVDM type. |
| fn new(nvdm_type: NvdmType) -> Self { |
| Self { |
| mctp_header: MctpHeader::single_packet(), |
| nvdm_header: NvdmHeader::new(nvdm_type), |
| } |
| } |
| } |
| |
| /// Common FSP response header with MCTP, NVDM and command response payloads. |
| #[repr(C, packed)] |
| #[derive(Clone, Copy)] |
| struct FspResponseHeader { |
| header: FspMessageHeader, |
| response: NvdmPayloadCommandResponse, |
| } |
| |
| // SAFETY: FspResponseHeader is a packed C struct with only integral fields. |
| unsafe impl FromBytes for FspResponseHeader {} |
| |
| /// Complete FSP PRC response including the knob state payload. |
| #[repr(C, packed)] |
| #[derive(Clone, Copy)] |
| struct FspPrcResponse { |
| header: FspResponseHeader, |
| prc_data: NvdmPayloadPrcResponse, |
| } |
| |
| // SAFETY: FspPrcResponse is a packed C struct with only integral fields. |
| unsafe impl FromBytes for FspPrcResponse {} |
| |
| /// Trait implemented by types representing a message to send to FSP. |
| /// |
| /// This provides [`Fsp::send_sync_fsp`] with the information it needs to send |
| /// a given message, following the same pattern as GSP's `CommandToGsp`. |
| trait MessageToFsp: AsBytes { |
| /// NVDM type identifying this message to FSP. |
| const NVDM_TYPE: NvdmType; |
| } |
| |
| /// NVDM (NVIDIA Data Model) CoT (Chain of Trust) payload, the main |
| /// message body sent to FSP for Chain of Trust boot. |
| #[repr(C, packed)] |
| #[derive(Clone, Copy, Zeroable)] |
| struct NvdmPayloadCot { |
| version: u16, |
| size: u16, |
| gsp_fmc_sysmem_offset: u64, |
| frts_sysmem_offset: u64, |
| frts_sysmem_size: u32, |
| frts_vidmem_offset: u64, |
| frts_vidmem_size: u32, |
| sigs: FmcSignatures, |
| gsp_boot_args_sysmem_offset: u64, |
| } |
| |
| /// Complete FSP COT (Chain of Trust) message structure. |
| #[repr(C)] |
| #[derive(Clone, Copy)] |
| struct FspCotMessage { |
| header: FspMessageHeader, |
| cot: NvdmPayloadCot, |
| } |
| |
| impl FspCotMessage { |
| /// Computes the FRTS vidmem offset for the Chain-of-Trust message. It is measured backwards |
| /// from the end of the framebuffer. |
| fn frts_vidmem_offset(hal: &dyn hal::FspHal, fb_info: &FbSizes) -> Result<u64> { |
| let mut offset = hal.fb_end_reserved_size(); |
| |
| // As per OpenRM's `kfspPrepareBootCommands_GH100`. |
| if fb_info.pmu_reserved_size != 0 { |
| offset = (offset + u64::from(fb_info.pmu_reserved_size)) |
| // The 2 MiB alignment is r570-specific. |
| .align_up(Alignment::new::<SZ_2M>()) |
| .ok_or(EINVAL)?; |
| } |
| |
| Ok(offset) |
| } |
| |
| /// Returns an in-place initializer for [`FspCotMessage`]. |
| fn new<'a>( |
| fb_info: &FbSizes, |
| fsp_fw: &'a FspFirmware, |
| args: &'a FmcBootArgs<'_>, |
| ) -> Result<impl Init<Self> + 'a> { |
| let hal = hal::fsp_hal(args.chipset).ok_or(ENOTSUPP)?; |
| |
| let frts_vidmem_offset = if !args.resume { |
| Self::frts_vidmem_offset(hal, fb_info)? |
| } else { |
| 0 |
| }; |
| |
| let frts_size: u32 = if !args.resume { |
| fb_info.frts_size.try_into()? |
| } else { |
| 0 |
| }; |
| |
| let version = hal.cot_version(); |
| let size = num::usize_into_u16::<{ core::mem::size_of::<NvdmPayloadCot>() }>(); |
| |
| Ok(init!(Self { |
| header: FspMessageHeader::new(NvdmType::Cot), |
| // The payload is packed, so we cannot use `init!`. Initialize it member-by-member using |
| // `chain`. |
| cot <- pin_init::init_zeroed(), |
| }) |
| .chain(move |msg| { |
| msg.cot.version = version; |
| msg.cot.size = size; |
| msg.cot.gsp_fmc_sysmem_offset = fsp_fw.fmc_image.dma_address(); |
| msg.cot.frts_vidmem_offset = frts_vidmem_offset; |
| msg.cot.frts_vidmem_size = frts_size; |
| // frts_sysmem_* are left at zero because this path places FRTS in vidmem. The sysmem |
| // fields point to an FRTS buffer in sysmem instead, for systems without VRAM. |
| msg.cot.gsp_boot_args_sysmem_offset = args.fmc_boot_params.dma_address(); |
| msg.cot.sigs = *fsp_fw.fmc_sigs; |
| |
| Ok(()) |
| })) |
| } |
| } |
| |
| // SAFETY: `FspCotMessage` is `#[repr(C)]` with no padding, so all of its |
| // bytes are initialized. |
| unsafe impl AsBytes for FspCotMessage {} |
| |
| /// Complete FSP PRC message. |
| #[repr(C, packed)] |
| #[derive(Clone, Copy)] |
| struct FspPrcMessage { |
| header: FspMessageHeader, |
| prc: NvdmPayloadPrc, |
| } |
| |
| impl FspPrcMessage { |
| /// Constructs a PRC message. |
| fn new(subcmd: PrcMessageSubcmd, object_id: PrcObjectId, flags: PrcFlags) -> Self { |
| Self { |
| header: FspMessageHeader::new(NvdmType::Prc), |
| prc: NvdmPayloadPrc::new(subcmd, object_id, flags), |
| } |
| } |
| } |
| |
| // SAFETY: FspPrcMessage is a packed C struct with only integral fields. |
| unsafe impl AsBytes for FspPrcMessage {} |
| |
| impl MessageToFsp for FspCotMessage { |
| const NVDM_TYPE: NvdmType = NvdmType::Cot; |
| } |
| |
| impl MessageToFsp for FspPrcMessage { |
| const NVDM_TYPE: NvdmType = NvdmType::Prc; |
| } |
| |
| /// Bundled arguments for FMC boot via FSP Chain of Trust. |
| pub(crate) struct FmcBootArgs<'a> { |
| chipset: Chipset, |
| fmc_boot_params: Coherent<GspFmcBootParams>, |
| resume: bool, |
| // Additional dependencies required to be kept alive for FMC boot. |
| _wpr_meta: Coherent<GspFwWprMeta>, |
| _libos: &'a Coherent<[LibosMemoryRegionInitArgument]>, |
| } |
| |
| impl<'a> FmcBootArgs<'a> { |
| /// Builds FMC boot arguments, allocating the DMA-coherent boot parameter |
| /// structure that FSP will read. |
| pub(crate) fn new( |
| dev: &device::Device<device::Bound>, |
| chipset: Chipset, |
| wpr_meta: Coherent<GspFwWprMeta>, |
| libos: &'a Coherent<[LibosMemoryRegionInitArgument]>, |
| resume: bool, |
| ) -> Result<Self> { |
| let init = GspFmcBootParams::new(wpr_meta.dma_address(), libos.dma_address()); |
| |
| Ok(Self { |
| chipset, |
| fmc_boot_params: Coherent::<GspFmcBootParams>::init(dev, GFP_KERNEL, init)?, |
| resume, |
| _wpr_meta: wpr_meta, |
| _libos: libos, |
| }) |
| } |
| |
| /// Returns the FMC boot parameters allocation. |
| pub(crate) fn boot_params(&self) -> &Coherent<GspFmcBootParams> { |
| &self.fmc_boot_params |
| } |
| } |
| |
| /// FSP interface for Hopper/Blackwell GPUs. |
| /// |
| /// An `Fsp` is produced by [`Fsp::wait_secure_boot`], which only returns once FSP secure boot |
| /// has completed. It owns the FSP falcon and the FMC firmware, which are used for the subsequent |
| /// Chain of Trust boot. |
| pub(crate) struct Fsp<'a> { |
| falcon: Falcon<'a, FspEngine>, |
| fsp_fw: FspFirmware, |
| } |
| |
| impl<'a> Fsp<'a> { |
| /// Attempts to create a `Fsp` instance. |
| /// |
| /// This can involve waiting for FSP secure boot completion, but should be instantaneous in |
| /// practice. |
| /// |
| /// If `chipset` doesn't support FSP, `Ok(None)` is returned. |
| pub(crate) fn try_new( |
| dev: &'a device::Device<device::Bound>, |
| bar: Bar0<'a>, |
| chipset: Chipset, |
| ) -> Result<Option<Self>> { |
| match hal::fsp_hal(chipset) { |
| None => Ok(None), |
| Some(hal) => Self::wait_secure_boot(dev, bar, chipset, hal).map(Option::Some), |
| } |
| } |
| |
| /// Waits for FSP secure boot completion, then returns the [`Fsp`] interface. |
| /// |
| /// Polls the thermal scratch register until FSP signals boot completion or the timeout |
| /// elapses. Returning an [`Fsp`] only on success guarantees, at the API level, that the |
| /// interface is not used before secure boot has completed. |
| fn wait_secure_boot( |
| dev: &'a device::Device<device::Bound>, |
| bar: Bar0<'a>, |
| chipset: Chipset, |
| hal: &'static dyn hal::FspHal, |
| ) -> Result<Fsp<'a>> { |
| /// FSP secure boot completion timeout in milliseconds. |
| const FSP_SECURE_BOOT_TIMEOUT_MS: i64 = 5000; |
| |
| let falcon = Falcon::<FspEngine>::new(dev, chipset, bar)?; |
| let fsp_fw = FspFirmware::new(dev, chipset)?; |
| |
| read_poll_timeout( |
| || Ok(hal.fsp_boot_status(bar)), |
| |&status| status == regs::NV_THERM_I2CS_SCRATCH_FSP_BOOT_COMPLETE_STATUS_SUCCESS, |
| Delta::from_millis(10), |
| Delta::from_millis(FSP_SECURE_BOOT_TIMEOUT_MS), |
| ) |
| .inspect_err(|e| { |
| dev_err!(dev, "FSP secure boot completion error: {:?}\n", e); |
| })?; |
| |
| Ok(Fsp { falcon, fsp_fw }) |
| } |
| |
| /// Sends a message to FSP and waits for the response. |
| /// Returns the full response buffer on success. |
| fn send_sync_fsp<M>(&mut self, dev: &device::Device, msg: &M) -> Result<KVec<u8>> |
| where |
| M: MessageToFsp, |
| { |
| self.falcon.send_msg(msg.as_bytes())?; |
| |
| let response_buf = self.falcon.recv_msg().inspect_err(|e| { |
| dev_err!(dev, "FSP response error: {:?}\n", e); |
| })?; |
| |
| let (response, _) = |
| FspResponseHeader::from_bytes_prefix(&response_buf[..]).ok_or_else(|| { |
| dev_err!(dev, "FSP response too small: {}\n", response_buf.len()); |
| EIO |
| })?; |
| |
| let mctp_header = response.header.mctp_header; |
| let nvdm_header = response.header.nvdm_header; |
| let command_nvdm_type = response.response.command_nvdm_type; |
| let error_code = response.response.error_code; |
| |
| if !mctp_header.is_single_packet() { |
| dev_err!( |
| dev, |
| "Unexpected MCTP header in FSP reply: {:x?}\n", |
| mctp_header, |
| ); |
| return Err(EIO); |
| } |
| |
| if !nvdm_header.validate(NvdmType::FspResponse) { |
| dev_err!( |
| dev, |
| "Unexpected NVDM header in FSP reply: {:x?}\n", |
| nvdm_header, |
| ); |
| return Err(EIO); |
| } |
| |
| if command_nvdm_type.try_into_bounded() != Some(M::NVDM_TYPE.into()) { |
| dev_err!( |
| dev, |
| "Expected NVDM type {:?} in reply, got {:#x}\n", |
| M::NVDM_TYPE, |
| command_nvdm_type |
| ); |
| return Err(EIO); |
| } |
| |
| if error_code != 0 { |
| dev_err!( |
| dev, |
| "NVDM command {:?} failed with error {:#x}\n", |
| M::NVDM_TYPE, |
| error_code |
| ); |
| return Err(EIO); |
| } |
| |
| Ok(response_buf) |
| } |
| |
| /// Reads the active vGPU mode from FSP using the PRC protocol. |
| /// |
| /// Queries FSP's Management Partition for the active vGPU mode knob value. |
| pub(crate) fn read_vgpu_mode( |
| &mut self, |
| dev: &device::Device<device::Bound>, |
| ) -> Result<VgpuMode> { |
| let msg = FspPrcMessage::new( |
| PrcMessageSubcmd::Read, |
| PrcObjectId::VgpuMode, |
| PrcFlags::from(PrcFlag::Active), |
| ); |
| |
| let response_buf = self.send_sync_fsp(dev, &msg)?; |
| let (prc_response, _) = |
| FspPrcResponse::from_bytes_prefix(&response_buf[..]).ok_or_else(|| { |
| dev_err!(dev, "PRC response too small: {}\n", response_buf.len()); |
| EIO |
| })?; |
| |
| let prc_data = prc_response.prc_data; |
| |
| VgpuMode::try_from(prc_data).inspect_err(|_| { |
| dev_err!(dev, "Unexpected vGPU mode value: {:#x}\n", prc_data.value()); |
| }) |
| } |
| |
| /// Boots GSP FMC via FSP Chain of Trust. |
| /// |
| /// Builds the CoT message from the pre-configured [`FmcBootArgs`], sends it |
| /// to FSP, and waits for the response. |
| pub(crate) fn boot_fmc( |
| &mut self, |
| dev: &device::Device<device::Bound>, |
| fb_info: &FbSizes, |
| args: &FmcBootArgs<'_>, |
| ) -> Result { |
| dev_dbg!(dev, "Starting FSP boot sequence for {}\n", args.chipset); |
| |
| let msg = KBox::init(FspCotMessage::new(fb_info, &self.fsp_fw, args)?, GFP_KERNEL)?; |
| |
| let _response_buf = self.send_sync_fsp(dev, &*msg)?; |
| |
| dev_dbg!(dev, "FSP Chain of Trust completed successfully\n"); |
| Ok(()) |
| } |
| } |