| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ADXL345 3-Axis Digital Accelerometer IIO core driver |
| * |
| * Copyright (c) 2017 Eva Rachel Retuya <eraretuya@gmail.com> |
| * |
| * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/units.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/events.h> |
| #include <linux/iio/kfifo_buf.h> |
| |
| #include "adxl345.h" |
| |
| #define ADXL345_FIFO_BYPASS 0 |
| #define ADXL345_FIFO_FIFO 1 |
| #define ADXL345_FIFO_STREAM 2 |
| |
| #define ADXL345_DIRS 3 |
| |
| #define ADXL345_INT_NONE 0xff |
| #define ADXL345_INT1 0 |
| #define ADXL345_INT2 1 |
| |
| #define ADXL345_REG_TAP_AXIS_MSK GENMASK(2, 0) |
| #define ADXL345_REG_TAP_SUPPRESS_MSK BIT(3) |
| #define ADXL345_REG_TAP_SUPPRESS BIT(3) |
| #define ADXL345_POWER_CTL_INACT_MSK (ADXL345_POWER_CTL_AUTO_SLEEP | ADXL345_POWER_CTL_LINK) |
| |
| #define ADXL345_TAP_Z_EN BIT(0) |
| #define ADXL345_TAP_Y_EN BIT(1) |
| #define ADXL345_TAP_X_EN BIT(2) |
| #define ADXL345_REG_TAP_SUPPRESS BIT(3) |
| |
| #define ADXL345_INACT_Z_EN BIT(0) |
| #define ADXL345_INACT_Y_EN BIT(1) |
| #define ADXL345_INACT_X_EN BIT(2) |
| #define ADXL345_REG_INACT_ACDC BIT(3) |
| #define ADXL345_ACT_INACT_NO_AXIS_EN 0x00 |
| #define ADXL345_INACT_XYZ_EN (ADXL345_INACT_Z_EN | ADXL345_INACT_Y_EN | ADXL345_INACT_X_EN) |
| |
| #define ADXL345_ACT_Z_EN BIT(4) |
| #define ADXL345_ACT_Y_EN BIT(5) |
| #define ADXL345_ACT_X_EN BIT(6) |
| #define ADXL345_REG_ACT_ACDC BIT(7) |
| #define ADXL345_ACT_XYZ_EN (ADXL345_ACT_Z_EN | ADXL345_ACT_Y_EN | ADXL345_ACT_X_EN) |
| |
| #define ADXL345_COUPLING_DC 0 |
| #define ADXL345_COUPLING_AC 1 |
| #define ADXL345_REG_NO_ACDC 0x00 |
| |
| /* single/double tap */ |
| enum adxl345_tap_type { |
| ADXL345_SINGLE_TAP, |
| ADXL345_DOUBLE_TAP, |
| }; |
| |
| static const unsigned int adxl345_tap_int_reg[] = { |
| [ADXL345_SINGLE_TAP] = ADXL345_INT_SINGLE_TAP, |
| [ADXL345_DOUBLE_TAP] = ADXL345_INT_DOUBLE_TAP, |
| }; |
| |
| enum adxl345_tap_time_type { |
| ADXL345_TAP_TIME_LATENT, |
| ADXL345_TAP_TIME_WINDOW, |
| ADXL345_TAP_TIME_DUR, |
| }; |
| |
| static const unsigned int adxl345_tap_time_reg[] = { |
| [ADXL345_TAP_TIME_LATENT] = ADXL345_REG_LATENT, |
| [ADXL345_TAP_TIME_WINDOW] = ADXL345_REG_WINDOW, |
| [ADXL345_TAP_TIME_DUR] = ADXL345_REG_DUR, |
| }; |
| |
| /* activity/inactivity */ |
| enum adxl345_activity_type { |
| ADXL345_ACTIVITY, |
| ADXL345_INACTIVITY, |
| ADXL345_ACTIVITY_AC, |
| ADXL345_INACTIVITY_AC, |
| ADXL345_INACTIVITY_FF, |
| }; |
| |
| static const unsigned int adxl345_act_int_reg[] = { |
| [ADXL345_ACTIVITY] = ADXL345_INT_ACTIVITY, |
| [ADXL345_INACTIVITY] = ADXL345_INT_INACTIVITY, |
| [ADXL345_ACTIVITY_AC] = ADXL345_INT_ACTIVITY, |
| [ADXL345_INACTIVITY_AC] = ADXL345_INT_INACTIVITY, |
| [ADXL345_INACTIVITY_FF] = ADXL345_INT_FREE_FALL, |
| }; |
| |
| static const unsigned int adxl345_act_thresh_reg[] = { |
| [ADXL345_ACTIVITY] = ADXL345_REG_THRESH_ACT, |
| [ADXL345_INACTIVITY] = ADXL345_REG_THRESH_INACT, |
| [ADXL345_ACTIVITY_AC] = ADXL345_REG_THRESH_ACT, |
| [ADXL345_INACTIVITY_AC] = ADXL345_REG_THRESH_INACT, |
| [ADXL345_INACTIVITY_FF] = ADXL345_REG_THRESH_FF, |
| }; |
| |
| static const unsigned int adxl345_act_acdc_msk[] = { |
| [ADXL345_ACTIVITY] = ADXL345_REG_ACT_ACDC, |
| [ADXL345_INACTIVITY] = ADXL345_REG_INACT_ACDC, |
| [ADXL345_ACTIVITY_AC] = ADXL345_REG_ACT_ACDC, |
| [ADXL345_INACTIVITY_AC] = ADXL345_REG_INACT_ACDC, |
| [ADXL345_INACTIVITY_FF] = ADXL345_REG_NO_ACDC, |
| }; |
| |
| enum adxl345_odr { |
| ADXL345_ODR_0P10HZ = 0, |
| ADXL345_ODR_0P20HZ, |
| ADXL345_ODR_0P39HZ, |
| ADXL345_ODR_0P78HZ, |
| ADXL345_ODR_1P56HZ, |
| ADXL345_ODR_3P13HZ, |
| ADXL345_ODR_6P25HZ, |
| ADXL345_ODR_12P50HZ, |
| ADXL345_ODR_25HZ, |
| ADXL345_ODR_50HZ, |
| ADXL345_ODR_100HZ, |
| ADXL345_ODR_200HZ, |
| ADXL345_ODR_400HZ, |
| ADXL345_ODR_800HZ, |
| ADXL345_ODR_1600HZ, |
| ADXL345_ODR_3200HZ, |
| }; |
| |
| enum adxl345_range { |
| ADXL345_2G_RANGE = 0, |
| ADXL345_4G_RANGE, |
| ADXL345_8G_RANGE, |
| ADXL345_16G_RANGE, |
| }; |
| |
| /* Certain features recommend 12.5 Hz - 400 Hz ODR */ |
| static const int adxl345_odr_tbl[][2] = { |
| [ADXL345_ODR_0P10HZ] = { 0, 97000 }, |
| [ADXL345_ODR_0P20HZ] = { 0, 195000 }, |
| [ADXL345_ODR_0P39HZ] = { 0, 390000 }, |
| [ADXL345_ODR_0P78HZ] = { 0, 781000 }, |
| [ADXL345_ODR_1P56HZ] = { 1, 562000 }, |
| [ADXL345_ODR_3P13HZ] = { 3, 125000 }, |
| [ADXL345_ODR_6P25HZ] = { 6, 250000 }, |
| [ADXL345_ODR_12P50HZ] = { 12, 500000 }, |
| [ADXL345_ODR_25HZ] = { 25, 0 }, |
| [ADXL345_ODR_50HZ] = { 50, 0 }, |
| [ADXL345_ODR_100HZ] = { 100, 0 }, |
| [ADXL345_ODR_200HZ] = { 200, 0 }, |
| [ADXL345_ODR_400HZ] = { 400, 0 }, |
| [ADXL345_ODR_800HZ] = { 800, 0 }, |
| [ADXL345_ODR_1600HZ] = { 1600, 0 }, |
| [ADXL345_ODR_3200HZ] = { 3200, 0 }, |
| }; |
| |
| /* |
| * Full resolution frequency table: |
| * (g * 2 * 9.80665) / (2^(resolution) - 1) |
| * |
| * resolution := 13 (full) |
| * g := 2|4|8|16 |
| * |
| * 2g at 13bit: 0.004789 |
| * 4g at 13bit: 0.009578 |
| * 8g at 13bit: 0.019156 |
| * 16g at 16bit: 0.038312 |
| */ |
| static const int adxl345_fullres_range_tbl[][2] = { |
| [ADXL345_2G_RANGE] = { 0, 4789 }, |
| [ADXL345_4G_RANGE] = { 0, 9578 }, |
| [ADXL345_8G_RANGE] = { 0, 19156 }, |
| [ADXL345_16G_RANGE] = { 0, 38312 }, |
| }; |
| |
| /* scaling */ |
| static const int adxl345_range_factor_tbl[] = { |
| [ADXL345_2G_RANGE] = 1, |
| [ADXL345_4G_RANGE] = 2, |
| [ADXL345_8G_RANGE] = 4, |
| [ADXL345_16G_RANGE] = 8, |
| }; |
| |
| struct adxl345_state { |
| const struct adxl345_chip_info *info; |
| struct regmap *regmap; |
| bool fifo_delay; /* delay: delay is needed for SPI */ |
| u8 watermark; |
| u8 fifo_mode; |
| |
| u8 inact_threshold; |
| u32 inact_time_ms; |
| |
| u32 tap_duration_us; |
| u32 tap_latent_us; |
| u32 tap_window_us; |
| |
| __le16 fifo_buf[ADXL345_DIRS * ADXL345_FIFO_SIZE + 1] __aligned(IIO_DMA_MINALIGN); |
| }; |
| |
| static const struct iio_event_spec adxl345_events[] = { |
| { |
| /* activity */ |
| .type = IIO_EV_TYPE_MAG, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_shared_by_type = |
| BIT(IIO_EV_INFO_ENABLE) | |
| BIT(IIO_EV_INFO_VALUE), |
| }, |
| { |
| /* activity, ac bit set */ |
| .type = IIO_EV_TYPE_MAG_ADAPTIVE, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_shared_by_type = |
| BIT(IIO_EV_INFO_ENABLE) | |
| BIT(IIO_EV_INFO_VALUE), |
| }, |
| { |
| /* single tap */ |
| .type = IIO_EV_TYPE_GESTURE, |
| .dir = IIO_EV_DIR_SINGLETAP, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_TIMEOUT), |
| }, |
| { |
| /* double tap */ |
| .type = IIO_EV_TYPE_GESTURE, |
| .dir = IIO_EV_DIR_DOUBLETAP, |
| .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE) | |
| BIT(IIO_EV_INFO_RESET_TIMEOUT) | |
| BIT(IIO_EV_INFO_TAP2_MIN_DELAY), |
| }, |
| }; |
| |
| #define ADXL345_CHANNEL(index, reg, axis) { \ |
| .type = IIO_ACCEL, \ |
| .modified = 1, \ |
| .channel2 = IIO_MOD_##axis, \ |
| .address = (reg), \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ |
| BIT(IIO_CHAN_INFO_CALIBBIAS), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_SAMP_FREQ), \ |
| .scan_index = (index), \ |
| .scan_type = { \ |
| .sign = 's', \ |
| .realbits = 13, \ |
| .storagebits = 16, \ |
| .endianness = IIO_LE, \ |
| }, \ |
| .event_spec = adxl345_events, \ |
| .num_event_specs = ARRAY_SIZE(adxl345_events), \ |
| } |
| |
| enum adxl345_chans { |
| chan_x, chan_y, chan_z, |
| }; |
| |
| static const struct iio_event_spec adxl345_fake_chan_events[] = { |
| { |
| /* inactivity */ |
| .type = IIO_EV_TYPE_MAG, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| .mask_shared_by_type = |
| BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_PERIOD), |
| }, |
| { |
| /* inactivity, AC bit set */ |
| .type = IIO_EV_TYPE_MAG_ADAPTIVE, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_ENABLE), |
| .mask_shared_by_type = |
| BIT(IIO_EV_INFO_VALUE) | |
| BIT(IIO_EV_INFO_PERIOD), |
| }, |
| }; |
| |
| static const struct iio_chan_spec adxl345_channels[] = { |
| ADXL345_CHANNEL(0, chan_x, X), |
| ADXL345_CHANNEL(1, chan_y, Y), |
| ADXL345_CHANNEL(2, chan_z, Z), |
| { |
| .type = IIO_ACCEL, |
| .modified = 1, |
| .channel2 = IIO_MOD_X_AND_Y_AND_Z, |
| .scan_index = -1, /* Fake channel */ |
| .event_spec = adxl345_fake_chan_events, |
| .num_event_specs = ARRAY_SIZE(adxl345_fake_chan_events), |
| }, |
| }; |
| |
| static const unsigned long adxl345_scan_masks[] = { |
| BIT(chan_x) | BIT(chan_y) | BIT(chan_z), |
| 0 |
| }; |
| |
| bool adxl345_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case ADXL345_REG_DATA_AXIS(0): |
| case ADXL345_REG_DATA_AXIS(1): |
| case ADXL345_REG_DATA_AXIS(2): |
| case ADXL345_REG_DATA_AXIS(3): |
| case ADXL345_REG_DATA_AXIS(4): |
| case ADXL345_REG_DATA_AXIS(5): |
| case ADXL345_REG_ACT_TAP_STATUS: |
| case ADXL345_REG_FIFO_STATUS: |
| case ADXL345_REG_INT_SOURCE: |
| return true; |
| default: |
| return false; |
| } |
| } |
| EXPORT_SYMBOL_NS_GPL(adxl345_is_volatile_reg, "IIO_ADXL345"); |
| |
| /** |
| * adxl345_set_measure_en() - Enable and disable measuring. |
| * |
| * @st: The device data. |
| * @en: Enable measurements, else standby mode. |
| * |
| * For lowest power operation, standby mode can be used. In standby mode, |
| * current consumption is supposed to be reduced to 0.1uA (typical). In this |
| * mode no measurements are made. Placing the device into standby mode |
| * preserves the contents of FIFO. |
| * |
| * Return: Returns 0 if successful, or a negative error value. |
| */ |
| static int adxl345_set_measure_en(struct adxl345_state *st, bool en) |
| { |
| return regmap_assign_bits(st->regmap, ADXL345_REG_POWER_CTL, |
| ADXL345_POWER_CTL_MEASURE, en); |
| } |
| |
| /* activity / inactivity */ |
| |
| static int adxl345_set_inact_threshold(struct adxl345_state *st, |
| unsigned int threshold) |
| { |
| int ret; |
| |
| st->inact_threshold = min(U8_MAX, threshold); |
| |
| ret = regmap_write(st->regmap, |
| adxl345_act_thresh_reg[ADXL345_INACTIVITY], |
| st->inact_threshold); |
| if (ret) |
| return ret; |
| |
| return regmap_write(st->regmap, |
| adxl345_act_thresh_reg[ADXL345_INACTIVITY_FF], |
| st->inact_threshold); |
| } |
| |
| static int adxl345_set_default_time(struct adxl345_state *st) |
| { |
| int max_boundary = U8_MAX; |
| int min_boundary = 10; |
| enum adxl345_odr odr; |
| unsigned int regval; |
| unsigned int val; |
| int ret; |
| |
| /* Generated inactivity time based on ODR */ |
| ret = regmap_read(st->regmap, ADXL345_REG_BW_RATE, ®val); |
| if (ret) |
| return ret; |
| |
| odr = FIELD_GET(ADXL345_BW_RATE_MSK, regval); |
| val = clamp(max_boundary - adxl345_odr_tbl[odr][0], |
| min_boundary, max_boundary); |
| st->inact_time_ms = MILLI * val; |
| |
| /* Inactivity time in s */ |
| return regmap_write(st->regmap, ADXL345_REG_TIME_INACT, val); |
| } |
| |
| static int adxl345_set_inactivity_time(struct adxl345_state *st, u32 val_int) |
| { |
| st->inact_time_ms = MILLI * val_int; |
| |
| return regmap_write(st->regmap, ADXL345_REG_TIME_INACT, val_int); |
| } |
| |
| static int adxl345_set_freefall_time(struct adxl345_state *st, u32 val_fract) |
| { |
| /* |
| * Datasheet max. value is 255 * 5000 us = 1.275000 seconds. |
| * |
| * Recommended values between 100ms and 350ms (0x14 to 0x46) |
| */ |
| st->inact_time_ms = DIV_ROUND_UP(val_fract, MILLI); |
| |
| return regmap_write(st->regmap, ADXL345_REG_TIME_FF, |
| DIV_ROUND_CLOSEST(val_fract, 5)); |
| } |
| |
| /** |
| * adxl345_set_inact_time - Configure inactivity time explicitly or by ODR. |
| * @st: The sensor state instance. |
| * @val_int: The inactivity time, integer part. |
| * @val_fract: The inactivity time, fractional part when val_int is 0. |
| * |
| * Inactivity time can be configured between 1 and 255 seconds. If a user sets |
| * val_s to 0, a default inactivity time is calculated automatically (since 0 is |
| * also invalid and undefined by the sensor). |
| * |
| * In such cases, power consumption should be considered: the inactivity period |
| * should be shorter at higher sampling frequencies and longer at lower ones. |
| * Specifically, for frequencies above 255 Hz, the default is set to 10 seconds; |
| * for frequencies below 10 Hz, it defaults to 255 seconds. |
| * |
| * The calculation method subtracts the integer part of the configured sample |
| * frequency from 255 to estimate the inactivity time in seconds. Sub-Hertz |
| * values are ignored in this approximation. Since the recommended output data |
| * rates (ODRs) for features like activity/inactivity detection, sleep modes, |
| * and free fall range between 12.5 Hz and 400 Hz, frequencies outside this |
| * range will either use the defined boundary defaults or require explicit |
| * configuration via val_s. |
| * |
| * Return: 0 or error value. |
| */ |
| static int adxl345_set_inact_time(struct adxl345_state *st, u32 val_int, |
| u32 val_fract) |
| { |
| if (val_int > 0) { |
| /* Time >= 1s, inactivity */ |
| return adxl345_set_inactivity_time(st, val_int); |
| } else if (val_int == 0) { |
| if (val_fract > 0) { |
| /* Time < 1s, free-fall */ |
| return adxl345_set_freefall_time(st, val_fract); |
| } else if (val_fract == 0) { |
| /* Time == 0.0s */ |
| return adxl345_set_default_time(st); |
| } |
| } |
| |
| /* Do not support negative or wrong input. */ |
| return -EINVAL; |
| } |
| |
| /** |
| * adxl345_is_act_inact_ac() - Verify if AC or DC coupling is currently enabled. |
| * |
| * @st: The device data. |
| * @type: The activity or inactivity type. |
| * |
| * Given a type of activity / inactivity combined with either AC coupling set or |
| * default to DC, this function verifies if the combination is currently |
| * configured, hence enabled or not. |
| * |
| * Return: true if configured coupling matches the provided type, else a negative |
| * error value. |
| */ |
| static int adxl345_is_act_inact_ac(struct adxl345_state *st, |
| enum adxl345_activity_type type) |
| { |
| unsigned int regval; |
| bool coupling; |
| int ret; |
| |
| if (type == ADXL345_INACTIVITY_FF) |
| return true; |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_ACT_INACT_CTRL, ®val); |
| if (ret) |
| return ret; |
| |
| coupling = adxl345_act_acdc_msk[type] & regval; |
| |
| switch (type) { |
| case ADXL345_ACTIVITY: |
| case ADXL345_INACTIVITY: |
| return coupling == ADXL345_COUPLING_DC; |
| case ADXL345_ACTIVITY_AC: |
| case ADXL345_INACTIVITY_AC: |
| return coupling == ADXL345_COUPLING_AC; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /** |
| * adxl345_set_act_inact_ac() - Configure AC coupling or DC coupling. |
| * |
| * @st: The device data. |
| * @type: Provide a type of activity or inactivity. |
| * @cmd_en: enable or disable AC coupling. |
| * |
| * Enables AC coupling or DC coupling depending on the provided type argument. |
| * Note: Activity and inactivity can be either AC coupled or DC coupled not |
| * both at the same time. |
| * |
| * Return: 0 if successful, else error value. |
| */ |
| static int adxl345_set_act_inact_ac(struct adxl345_state *st, |
| enum adxl345_activity_type type, |
| bool cmd_en) |
| { |
| unsigned int act_inact_ac; |
| |
| if (type == ADXL345_ACTIVITY_AC || type == ADXL345_INACTIVITY_AC) |
| act_inact_ac = ADXL345_COUPLING_AC && cmd_en; |
| else |
| act_inact_ac = ADXL345_COUPLING_DC && cmd_en; |
| |
| /* |
| * A setting of false selects dc-coupled operation, and a setting of |
| * true enables ac-coupled operation. In dc-coupled operation, the |
| * current acceleration magnitude is compared directly with |
| * ADXL345_REG_THRESH_ACT and ADXL345_REG_THRESH_INACT to determine |
| * whether activity or inactivity is detected. |
| * |
| * In ac-coupled operation for activity detection, the acceleration |
| * value at the start of activity detection is taken as a reference |
| * value. New samples of acceleration are then compared to this |
| * reference value, and if the magnitude of the difference exceeds the |
| * ADXL345_REG_THRESH_ACT value, the device triggers an activity |
| * interrupt. |
| * |
| * Similarly, in ac-coupled operation for inactivity detection, a |
| * reference value is used for comparison and is updated whenever the |
| * device exceeds the inactivity threshold. After the reference value |
| * is selected, the device compares the magnitude of the difference |
| * between the reference value and the current acceleration with |
| * ADXL345_REG_THRESH_INACT. If the difference is less than the value in |
| * ADXL345_REG_THRESH_INACT for the time in ADXL345_REG_TIME_INACT, the |
| * device is considered inactive and the inactivity interrupt is |
| * triggered. [quoted from p. 24, ADXL345 datasheet Rev. G] |
| * |
| * In a conclusion, the first acceleration snapshot sample which hit the |
| * threshold in a particular direction is always taken as acceleration |
| * reference value to that direction. Since for the hardware activity |
| * and inactivity depend on the x/y/z axis, so do ac and dc coupling. |
| * Note, this sw driver always enables or disables all three x/y/z axis |
| * for detection via act_axis_ctrl and inact_axis_ctrl, respectively. |
| * Where in dc-coupling samples are compared against the thresholds, in |
| * ac-coupling measurement difference to the first acceleration |
| * reference value are compared against the threshold. So, ac-coupling |
| * allows for a bit more dynamic compensation depending on the initial |
| * sample. |
| */ |
| return regmap_assign_bits(st->regmap, ADXL345_REG_ACT_INACT_CTRL, |
| adxl345_act_acdc_msk[type], act_inact_ac); |
| } |
| |
| static int adxl345_is_act_inact_en(struct adxl345_state *st, |
| enum adxl345_activity_type type) |
| { |
| unsigned int axis_ctrl; |
| unsigned int regval; |
| bool int_en, en; |
| int ret; |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_ACT_INACT_CTRL, &axis_ctrl); |
| if (ret) |
| return ret; |
| |
| /* Check if axis for activity are enabled */ |
| switch (type) { |
| case ADXL345_ACTIVITY: |
| case ADXL345_ACTIVITY_AC: |
| en = FIELD_GET(ADXL345_ACT_XYZ_EN, axis_ctrl); |
| if (!en) |
| return false; |
| break; |
| case ADXL345_INACTIVITY: |
| case ADXL345_INACTIVITY_AC: |
| en = FIELD_GET(ADXL345_INACT_XYZ_EN, axis_ctrl); |
| if (!en) |
| return false; |
| break; |
| case ADXL345_INACTIVITY_FF: |
| en = true; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Check if specific interrupt is enabled */ |
| ret = regmap_read(st->regmap, ADXL345_REG_INT_ENABLE, ®val); |
| if (ret) |
| return ret; |
| |
| int_en = adxl345_act_int_reg[type] & regval; |
| if (!int_en) |
| return false; |
| |
| /* Check if configured coupling matches provided type */ |
| return adxl345_is_act_inact_ac(st, type); |
| } |
| |
| static int adxl345_set_act_inact_linkbit(struct adxl345_state *st, |
| enum adxl345_activity_type type, |
| bool en) |
| { |
| int act_ac_en, inact_ac_en; |
| int act_en, inact_en; |
| |
| act_en = adxl345_is_act_inact_en(st, ADXL345_ACTIVITY); |
| if (act_en < 0) |
| return act_en; |
| |
| act_ac_en = adxl345_is_act_inact_en(st, ADXL345_ACTIVITY_AC); |
| if (act_ac_en < 0) |
| return act_ac_en; |
| |
| if (type == ADXL345_INACTIVITY_FF) { |
| inact_en = false; |
| } else { |
| inact_en = adxl345_is_act_inact_en(st, ADXL345_INACTIVITY); |
| if (inact_en < 0) |
| return inact_en; |
| |
| inact_ac_en = adxl345_is_act_inact_en(st, ADXL345_INACTIVITY_AC); |
| if (inact_ac_en < 0) |
| return inact_ac_en; |
| |
| inact_en = inact_en || inact_ac_en; |
| } |
| |
| act_en = act_en || act_ac_en; |
| |
| return regmap_assign_bits(st->regmap, ADXL345_REG_POWER_CTL, |
| ADXL345_POWER_CTL_INACT_MSK, |
| en && act_en && inact_en); |
| } |
| |
| static int adxl345_set_act_inact_en(struct adxl345_state *st, |
| enum adxl345_activity_type type, |
| bool cmd_en) |
| { |
| unsigned int axis_ctrl; |
| unsigned int threshold; |
| unsigned int period; |
| int ret; |
| |
| if (cmd_en) { |
| /* When turning on, check if threshold is valid */ |
| if (type == ADXL345_ACTIVITY || type == ADXL345_ACTIVITY_AC) { |
| ret = regmap_read(st->regmap, |
| adxl345_act_thresh_reg[type], |
| &threshold); |
| if (ret) |
| return ret; |
| } else { |
| threshold = st->inact_threshold; |
| } |
| |
| if (!threshold) /* Just ignore the command if threshold is 0 */ |
| return 0; |
| |
| /* When turning on inactivity, check if inact time is valid */ |
| if (type == ADXL345_INACTIVITY || type == ADXL345_INACTIVITY_AC) { |
| ret = regmap_read(st->regmap, |
| ADXL345_REG_TIME_INACT, |
| &period); |
| if (ret) |
| return ret; |
| |
| if (!period) |
| return 0; |
| } |
| } else { |
| /* |
| * When turning off an activity, ensure that the correct |
| * coupling event is specified. This step helps prevent misuse - |
| * for example, if an AC-coupled activity is active and the |
| * current call attempts to turn off a DC-coupled activity, this |
| * inconsistency should be detected here. |
| */ |
| if (adxl345_is_act_inact_ac(st, type) <= 0) |
| return 0; |
| } |
| |
| /* Start modifying configuration registers */ |
| ret = adxl345_set_measure_en(st, false); |
| if (ret) |
| return ret; |
| |
| /* Enable axis according to the command */ |
| switch (type) { |
| case ADXL345_ACTIVITY: |
| case ADXL345_ACTIVITY_AC: |
| axis_ctrl = ADXL345_ACT_XYZ_EN; |
| break; |
| case ADXL345_INACTIVITY: |
| case ADXL345_INACTIVITY_AC: |
| axis_ctrl = ADXL345_INACT_XYZ_EN; |
| break; |
| case ADXL345_INACTIVITY_FF: |
| axis_ctrl = ADXL345_ACT_INACT_NO_AXIS_EN; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = regmap_assign_bits(st->regmap, ADXL345_REG_ACT_INACT_CTRL, |
| axis_ctrl, cmd_en); |
| if (ret) |
| return ret; |
| |
| /* Update AC/DC-coupling according to the command */ |
| ret = adxl345_set_act_inact_ac(st, type, cmd_en); |
| if (ret) |
| return ret; |
| |
| /* Enable the interrupt line, according to the command */ |
| ret = regmap_assign_bits(st->regmap, ADXL345_REG_INT_ENABLE, |
| adxl345_act_int_reg[type], cmd_en); |
| if (ret) |
| return ret; |
| |
| /* Set link-bit and auto-sleep only when ACT and INACT are enabled */ |
| ret = adxl345_set_act_inact_linkbit(st, type, cmd_en); |
| if (ret) |
| return ret; |
| |
| return adxl345_set_measure_en(st, true); |
| } |
| |
| /* tap */ |
| |
| static int _adxl345_set_tap_int(struct adxl345_state *st, |
| enum adxl345_tap_type type, bool state) |
| { |
| unsigned int int_map = 0x00; |
| unsigned int tap_threshold; |
| bool axis_valid; |
| bool singletap_args_valid = false; |
| bool doubletap_args_valid = false; |
| bool en = false; |
| u32 axis_ctrl; |
| int ret; |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_TAP_AXIS, &axis_ctrl); |
| if (ret) |
| return ret; |
| |
| axis_valid = FIELD_GET(ADXL345_REG_TAP_AXIS_MSK, axis_ctrl) > 0; |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_THRESH_TAP, &tap_threshold); |
| if (ret) |
| return ret; |
| |
| /* |
| * Note: A value of 0 for threshold and/or dur may result in undesirable |
| * behavior if single tap/double tap interrupts are enabled. |
| */ |
| singletap_args_valid = tap_threshold > 0 && st->tap_duration_us > 0; |
| |
| if (type == ADXL345_SINGLE_TAP) { |
| en = axis_valid && singletap_args_valid; |
| } else { |
| /* doubletap: Window must be equal or greater than latent! */ |
| doubletap_args_valid = st->tap_latent_us > 0 && |
| st->tap_window_us > 0 && |
| st->tap_window_us >= st->tap_latent_us; |
| |
| en = axis_valid && singletap_args_valid && doubletap_args_valid; |
| } |
| |
| if (state && en) |
| int_map |= adxl345_tap_int_reg[type]; |
| |
| return regmap_update_bits(st->regmap, ADXL345_REG_INT_ENABLE, |
| adxl345_tap_int_reg[type], int_map); |
| } |
| |
| static int adxl345_is_tap_en(struct adxl345_state *st, |
| enum iio_modifier axis, |
| enum adxl345_tap_type type, bool *en) |
| { |
| unsigned int regval; |
| u32 axis_ctrl; |
| int ret; |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_TAP_AXIS, &axis_ctrl); |
| if (ret) |
| return ret; |
| |
| /* Verify if axis is enabled for the tap detection. */ |
| switch (axis) { |
| case IIO_MOD_X: |
| *en = FIELD_GET(ADXL345_TAP_X_EN, axis_ctrl); |
| break; |
| case IIO_MOD_Y: |
| *en = FIELD_GET(ADXL345_TAP_Y_EN, axis_ctrl); |
| break; |
| case IIO_MOD_Z: |
| *en = FIELD_GET(ADXL345_TAP_Z_EN, axis_ctrl); |
| break; |
| default: |
| *en = false; |
| return -EINVAL; |
| } |
| |
| if (*en) { |
| /* |
| * If axis allow for tap detection, verify if the interrupt is |
| * enabled for tap detection. |
| */ |
| ret = regmap_read(st->regmap, ADXL345_REG_INT_ENABLE, ®val); |
| if (ret) |
| return ret; |
| |
| *en = adxl345_tap_int_reg[type] & regval; |
| } |
| |
| return 0; |
| } |
| |
| static int adxl345_set_singletap_en(struct adxl345_state *st, |
| enum iio_modifier axis, bool en) |
| { |
| int ret; |
| u32 axis_ctrl; |
| |
| switch (axis) { |
| case IIO_MOD_X: |
| axis_ctrl = ADXL345_TAP_X_EN; |
| break; |
| case IIO_MOD_Y: |
| axis_ctrl = ADXL345_TAP_Y_EN; |
| break; |
| case IIO_MOD_Z: |
| axis_ctrl = ADXL345_TAP_Z_EN; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (en) |
| ret = regmap_set_bits(st->regmap, ADXL345_REG_TAP_AXIS, |
| axis_ctrl); |
| else |
| ret = regmap_clear_bits(st->regmap, ADXL345_REG_TAP_AXIS, |
| axis_ctrl); |
| if (ret) |
| return ret; |
| |
| return _adxl345_set_tap_int(st, ADXL345_SINGLE_TAP, en); |
| } |
| |
| static int adxl345_set_doubletap_en(struct adxl345_state *st, bool en) |
| { |
| int ret; |
| |
| /* |
| * Generally suppress detection of spikes during the latency period as |
| * double taps here, this is fully optional for double tap detection |
| */ |
| ret = regmap_assign_bits(st->regmap, ADXL345_REG_TAP_AXIS, |
| ADXL345_REG_TAP_SUPPRESS, en); |
| if (ret) |
| return ret; |
| |
| return _adxl345_set_tap_int(st, ADXL345_DOUBLE_TAP, en); |
| } |
| |
| static int _adxl345_set_tap_time(struct adxl345_state *st, |
| enum adxl345_tap_time_type type, u32 val_us) |
| { |
| unsigned int regval; |
| |
| switch (type) { |
| case ADXL345_TAP_TIME_WINDOW: |
| st->tap_window_us = val_us; |
| break; |
| case ADXL345_TAP_TIME_LATENT: |
| st->tap_latent_us = val_us; |
| break; |
| case ADXL345_TAP_TIME_DUR: |
| st->tap_duration_us = val_us; |
| break; |
| } |
| |
| /* |
| * The scale factor is 1250us / LSB for tap_window_us and tap_latent_us. |
| * For tap_duration_us the scale factor is 625us / LSB. |
| */ |
| if (type == ADXL345_TAP_TIME_DUR) |
| regval = DIV_ROUND_CLOSEST(val_us, 625); |
| else |
| regval = DIV_ROUND_CLOSEST(val_us, 1250); |
| |
| return regmap_write(st->regmap, adxl345_tap_time_reg[type], regval); |
| } |
| |
| static int adxl345_set_tap_duration(struct adxl345_state *st, u32 val_int, |
| u32 val_fract_us) |
| { |
| /* |
| * Max value is 255 * 625 us = 0.159375 seconds |
| * |
| * Note: the scaling is similar to the scaling in the ADXL380 |
| */ |
| if (val_int || val_fract_us > 159375) |
| return -EINVAL; |
| |
| return _adxl345_set_tap_time(st, ADXL345_TAP_TIME_DUR, val_fract_us); |
| } |
| |
| static int adxl345_set_tap_window(struct adxl345_state *st, u32 val_int, |
| u32 val_fract_us) |
| { |
| /* |
| * Max value is 255 * 1250 us = 0.318750 seconds |
| * |
| * Note: the scaling is similar to the scaling in the ADXL380 |
| */ |
| if (val_int || val_fract_us > 318750) |
| return -EINVAL; |
| |
| return _adxl345_set_tap_time(st, ADXL345_TAP_TIME_WINDOW, val_fract_us); |
| } |
| |
| static int adxl345_set_tap_latent(struct adxl345_state *st, u32 val_int, |
| u32 val_fract_us) |
| { |
| /* |
| * Max value is 255 * 1250 us = 0.318750 seconds |
| * |
| * Note: the scaling is similar to the scaling in the ADXL380 |
| */ |
| if (val_int || val_fract_us > 318750) |
| return -EINVAL; |
| |
| return _adxl345_set_tap_time(st, ADXL345_TAP_TIME_LATENT, val_fract_us); |
| } |
| |
| static int adxl345_find_odr(struct adxl345_state *st, int val, |
| int val2, enum adxl345_odr *odr) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(adxl345_odr_tbl); i++) { |
| if (val == adxl345_odr_tbl[i][0] && |
| val2 == adxl345_odr_tbl[i][1]) { |
| *odr = i; |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int adxl345_set_odr(struct adxl345_state *st, enum adxl345_odr odr) |
| { |
| int ret; |
| |
| ret = regmap_update_bits(st->regmap, ADXL345_REG_BW_RATE, |
| ADXL345_BW_RATE_MSK, |
| FIELD_PREP(ADXL345_BW_RATE_MSK, odr)); |
| if (ret) |
| return ret; |
| |
| /* update inactivity time by ODR */ |
| return adxl345_set_inact_time(st, 0, 0); |
| } |
| |
| static int adxl345_find_range(struct adxl345_state *st, int val, int val2, |
| enum adxl345_range *range) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(adxl345_fullres_range_tbl); i++) { |
| if (val == adxl345_fullres_range_tbl[i][0] && |
| val2 == adxl345_fullres_range_tbl[i][1]) { |
| *range = i; |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int adxl345_set_range(struct adxl345_state *st, enum adxl345_range range) |
| { |
| unsigned int act_threshold, inact_threshold; |
| unsigned int range_old; |
| unsigned int regval; |
| int ret; |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_DATA_FORMAT, ®val); |
| if (ret) |
| return ret; |
| range_old = FIELD_GET(ADXL345_DATA_FORMAT_RANGE, regval); |
| |
| ret = regmap_read(st->regmap, |
| adxl345_act_thresh_reg[ADXL345_ACTIVITY], |
| &act_threshold); |
| if (ret) |
| return ret; |
| |
| ret = regmap_update_bits(st->regmap, ADXL345_REG_DATA_FORMAT, |
| ADXL345_DATA_FORMAT_RANGE, |
| FIELD_PREP(ADXL345_DATA_FORMAT_RANGE, range)); |
| if (ret) |
| return ret; |
| |
| act_threshold = act_threshold * adxl345_range_factor_tbl[range_old] |
| / adxl345_range_factor_tbl[range]; |
| act_threshold = min(U8_MAX, max(1, act_threshold)); |
| |
| inact_threshold = st->inact_threshold; |
| inact_threshold = inact_threshold * adxl345_range_factor_tbl[range_old] |
| / adxl345_range_factor_tbl[range]; |
| inact_threshold = min(U8_MAX, max(1, inact_threshold)); |
| |
| ret = regmap_write(st->regmap, adxl345_act_thresh_reg[ADXL345_ACTIVITY], |
| act_threshold); |
| if (ret) |
| return ret; |
| |
| return adxl345_set_inact_threshold(st, inact_threshold); |
| } |
| |
| static int adxl345_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, |
| int *length, long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_SCALE: |
| *vals = (int *)adxl345_fullres_range_tbl; |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| *length = ARRAY_SIZE(adxl345_fullres_range_tbl) * 2; |
| return IIO_AVAIL_LIST; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *vals = (int *)adxl345_odr_tbl; |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| *length = ARRAY_SIZE(adxl345_odr_tbl) * 2; |
| return IIO_AVAIL_LIST; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int adxl345_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| __le16 accel; |
| unsigned int regval; |
| enum adxl345_odr odr; |
| enum adxl345_range range; |
| int ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| /* |
| * Data is stored in adjacent registers: |
| * ADXL345_REG_DATA(X0/Y0/Z0) contain the least significant byte |
| * and ADXL345_REG_DATA(X0/Y0/Z0) + 1 the most significant byte |
| */ |
| ret = regmap_bulk_read(st->regmap, |
| ADXL345_REG_DATA_AXIS(chan->address), |
| &accel, sizeof(accel)); |
| if (ret) |
| return ret; |
| |
| *val = sign_extend32(le16_to_cpu(accel), 12); |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| ret = regmap_read(st->regmap, ADXL345_REG_DATA_FORMAT, ®val); |
| if (ret) |
| return ret; |
| range = FIELD_GET(ADXL345_DATA_FORMAT_RANGE, regval); |
| *val = adxl345_fullres_range_tbl[range][0]; |
| *val2 = adxl345_fullres_range_tbl[range][1]; |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_CALIBBIAS: |
| ret = regmap_read(st->regmap, |
| ADXL345_REG_OFS_AXIS(chan->address), ®val); |
| if (ret) |
| return ret; |
| /* |
| * 8-bit resolution at +/- 2g, that is 4x accel data scale |
| * factor |
| */ |
| *val = sign_extend32(regval, 7) * 4; |
| |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| ret = regmap_read(st->regmap, ADXL345_REG_BW_RATE, ®val); |
| if (ret) |
| return ret; |
| odr = FIELD_GET(ADXL345_BW_RATE_MSK, regval); |
| *val = adxl345_odr_tbl[odr][0]; |
| *val2 = adxl345_odr_tbl[odr][1]; |
| return IIO_VAL_INT_PLUS_MICRO; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int adxl345_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| enum adxl345_range range; |
| enum adxl345_odr odr; |
| int ret; |
| |
| ret = adxl345_set_measure_en(st, false); |
| if (ret) |
| return ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_CALIBBIAS: |
| /* |
| * 8-bit resolution at +/- 2g, that is 4x accel data scale |
| * factor |
| */ |
| ret = regmap_write(st->regmap, |
| ADXL345_REG_OFS_AXIS(chan->address), |
| val / 4); |
| if (ret) |
| return ret; |
| break; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| ret = adxl345_find_odr(st, val, val2, &odr); |
| if (ret) |
| return ret; |
| |
| ret = adxl345_set_odr(st, odr); |
| if (ret) |
| return ret; |
| break; |
| case IIO_CHAN_INFO_SCALE: |
| ret = adxl345_find_range(st, val, val2, &range); |
| if (ret) |
| return ret; |
| |
| ret = adxl345_set_range(st, range); |
| if (ret) |
| return ret; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return adxl345_set_measure_en(st, true); |
| } |
| |
| static int adxl345_read_mag_config(struct adxl345_state *st, |
| enum iio_event_direction dir, |
| enum adxl345_activity_type type_act, |
| enum adxl345_activity_type type_inact) |
| { |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return !!adxl345_is_act_inact_en(st, type_act); |
| case IIO_EV_DIR_FALLING: |
| return !!adxl345_is_act_inact_en(st, type_inact); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int adxl345_write_mag_config(struct adxl345_state *st, |
| enum iio_event_direction dir, |
| enum adxl345_activity_type type_act, |
| enum adxl345_activity_type type_inact, |
| bool state) |
| { |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return adxl345_set_act_inact_en(st, type_act, state); |
| case IIO_EV_DIR_FALLING: |
| return adxl345_set_act_inact_en(st, type_inact, state); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int adxl345_read_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| bool int_en; |
| int ret; |
| |
| switch (type) { |
| case IIO_EV_TYPE_MAG: |
| return adxl345_read_mag_config(st, dir, |
| ADXL345_ACTIVITY, |
| ADXL345_INACTIVITY); |
| case IIO_EV_TYPE_MAG_ADAPTIVE: |
| return adxl345_read_mag_config(st, dir, |
| ADXL345_ACTIVITY_AC, |
| ADXL345_INACTIVITY_AC); |
| case IIO_EV_TYPE_GESTURE: |
| switch (dir) { |
| case IIO_EV_DIR_SINGLETAP: |
| ret = adxl345_is_tap_en(st, chan->channel2, |
| ADXL345_SINGLE_TAP, &int_en); |
| if (ret) |
| return ret; |
| return int_en; |
| case IIO_EV_DIR_DOUBLETAP: |
| ret = adxl345_is_tap_en(st, chan->channel2, |
| ADXL345_DOUBLE_TAP, &int_en); |
| if (ret) |
| return ret; |
| return int_en; |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int adxl345_write_event_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| bool state) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| |
| switch (type) { |
| case IIO_EV_TYPE_MAG: |
| return adxl345_write_mag_config(st, dir, |
| ADXL345_ACTIVITY, |
| ADXL345_INACTIVITY, |
| state); |
| case IIO_EV_TYPE_MAG_ADAPTIVE: |
| return adxl345_write_mag_config(st, dir, |
| ADXL345_ACTIVITY_AC, |
| ADXL345_INACTIVITY_AC, |
| state); |
| case IIO_EV_TYPE_GESTURE: |
| switch (dir) { |
| case IIO_EV_DIR_SINGLETAP: |
| return adxl345_set_singletap_en(st, chan->channel2, state); |
| case IIO_EV_DIR_DOUBLETAP: |
| return adxl345_set_doubletap_en(st, state); |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int adxl345_read_mag_value(struct adxl345_state *st, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| enum adxl345_activity_type type_act, |
| enum adxl345_activity_type type_inact, |
| int *val, int *val2) |
| { |
| unsigned int threshold; |
| int ret; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| ret = regmap_read(st->regmap, |
| adxl345_act_thresh_reg[type_act], |
| &threshold); |
| if (ret) |
| return ret; |
| *val = 62500 * threshold; |
| *val2 = MICRO; |
| return IIO_VAL_FRACTIONAL; |
| case IIO_EV_DIR_FALLING: |
| *val = 62500 * st->inact_threshold; |
| *val2 = MICRO; |
| return IIO_VAL_FRACTIONAL; |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_PERIOD: |
| *val = st->inact_time_ms; |
| *val2 = MILLI; |
| return IIO_VAL_FRACTIONAL; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int adxl345_write_mag_value(struct adxl345_state *st, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| enum adxl345_activity_type type_act, |
| enum adxl345_activity_type type_inact, |
| int val, int val2) |
| { |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| /* Scaling factor 62.5mg/LSB, i.e. ~16g corresponds to 0xff */ |
| val = DIV_ROUND_CLOSEST(val * MICRO + val2, 62500); |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| return regmap_write(st->regmap, |
| adxl345_act_thresh_reg[type_act], |
| val); |
| case IIO_EV_DIR_FALLING: |
| return adxl345_set_inact_threshold(st, val); |
| default: |
| return -EINVAL; |
| } |
| case IIO_EV_INFO_PERIOD: |
| return adxl345_set_inact_time(st, val, val2); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int adxl345_read_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int *val, int *val2) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| unsigned int tap_threshold; |
| int ret; |
| |
| switch (type) { |
| case IIO_EV_TYPE_MAG: |
| return adxl345_read_mag_value(st, dir, info, |
| ADXL345_ACTIVITY, |
| ADXL345_INACTIVITY, |
| val, val2); |
| case IIO_EV_TYPE_MAG_ADAPTIVE: |
| return adxl345_read_mag_value(st, dir, info, |
| ADXL345_ACTIVITY_AC, |
| ADXL345_INACTIVITY_AC, |
| val, val2); |
| case IIO_EV_TYPE_GESTURE: |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| /* |
| * The scale factor would be 62.5mg/LSB (i.e. 0xFF = 16g) but |
| * not applied here. In context of this general purpose sensor, |
| * what imports is rather signal intensity than the absolute |
| * measured g value. |
| */ |
| ret = regmap_read(st->regmap, ADXL345_REG_THRESH_TAP, |
| &tap_threshold); |
| if (ret) |
| return ret; |
| *val = sign_extend32(tap_threshold, 7); |
| return IIO_VAL_INT; |
| case IIO_EV_INFO_TIMEOUT: |
| *val = st->tap_duration_us; |
| *val2 = MICRO; |
| return IIO_VAL_FRACTIONAL; |
| case IIO_EV_INFO_RESET_TIMEOUT: |
| *val = st->tap_window_us; |
| *val2 = MICRO; |
| return IIO_VAL_FRACTIONAL; |
| case IIO_EV_INFO_TAP2_MIN_DELAY: |
| *val = st->tap_latent_us; |
| *val2 = MICRO; |
| return IIO_VAL_FRACTIONAL; |
| default: |
| return -EINVAL; |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int adxl345_write_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int val, int val2) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| ret = adxl345_set_measure_en(st, false); |
| if (ret) |
| return ret; |
| |
| switch (type) { |
| case IIO_EV_TYPE_MAG: |
| ret = adxl345_write_mag_value(st, dir, info, |
| ADXL345_ACTIVITY, |
| ADXL345_INACTIVITY, |
| val, val2); |
| if (ret) |
| return ret; |
| break; |
| case IIO_EV_TYPE_MAG_ADAPTIVE: |
| ret = adxl345_write_mag_value(st, dir, info, |
| ADXL345_ACTIVITY_AC, |
| ADXL345_INACTIVITY_AC, |
| val, val2); |
| if (ret) |
| return ret; |
| break; |
| case IIO_EV_TYPE_GESTURE: |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| ret = regmap_write(st->regmap, ADXL345_REG_THRESH_TAP, |
| min(val, 0xFF)); |
| if (ret) |
| return ret; |
| break; |
| case IIO_EV_INFO_TIMEOUT: |
| ret = adxl345_set_tap_duration(st, val, val2); |
| if (ret) |
| return ret; |
| break; |
| case IIO_EV_INFO_RESET_TIMEOUT: |
| ret = adxl345_set_tap_window(st, val, val2); |
| if (ret) |
| return ret; |
| break; |
| case IIO_EV_INFO_TAP2_MIN_DELAY: |
| ret = adxl345_set_tap_latent(st, val, val2); |
| if (ret) |
| return ret; |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return adxl345_set_measure_en(st, true); |
| } |
| |
| static int adxl345_reg_access(struct iio_dev *indio_dev, unsigned int reg, |
| unsigned int writeval, unsigned int *readval) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| |
| if (readval) |
| return regmap_read(st->regmap, reg, readval); |
| return regmap_write(st->regmap, reg, writeval); |
| } |
| |
| static int adxl345_set_watermark(struct iio_dev *indio_dev, unsigned int value) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| const unsigned int fifo_mask = 0x1F, watermark_mask = 0x02; |
| int ret; |
| |
| value = min(value, ADXL345_FIFO_SIZE - 1); |
| |
| ret = regmap_update_bits(st->regmap, ADXL345_REG_FIFO_CTL, fifo_mask, value); |
| if (ret) |
| return ret; |
| |
| st->watermark = value; |
| return regmap_update_bits(st->regmap, ADXL345_REG_INT_ENABLE, |
| watermark_mask, ADXL345_INT_WATERMARK); |
| } |
| |
| static int adxl345_write_raw_get_fmt(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_CALIBBIAS: |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| return IIO_VAL_INT_PLUS_MICRO; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static void adxl345_powerdown(void *ptr) |
| { |
| struct adxl345_state *st = ptr; |
| |
| adxl345_set_measure_en(st, false); |
| } |
| |
| static int adxl345_set_fifo(struct adxl345_state *st) |
| { |
| unsigned int intio; |
| int ret; |
| |
| /* FIFO should only be configured while in standby mode */ |
| ret = adxl345_set_measure_en(st, false); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_INT_MAP, &intio); |
| if (ret) |
| return ret; |
| |
| ret = regmap_write(st->regmap, ADXL345_REG_FIFO_CTL, |
| FIELD_PREP(ADXL345_FIFO_CTL_SAMPLES_MSK, |
| st->watermark) | |
| FIELD_PREP(ADXL345_FIFO_CTL_TRIGGER_MSK, intio) | |
| FIELD_PREP(ADXL345_FIFO_CTL_MODE_MSK, |
| st->fifo_mode)); |
| if (ret) |
| return ret; |
| |
| return adxl345_set_measure_en(st, true); |
| } |
| |
| /** |
| * adxl345_get_samples() - Read number of FIFO entries. |
| * @st: The initialized state instance of this driver. |
| * |
| * The sensor does not support treating any axis individually, or exclude them |
| * from measuring. |
| * |
| * Return: negative error, or value. |
| */ |
| static int adxl345_get_samples(struct adxl345_state *st) |
| { |
| unsigned int regval = 0; |
| int ret; |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_FIFO_STATUS, ®val); |
| if (ret) |
| return ret; |
| |
| return FIELD_GET(ADXL345_REG_FIFO_STATUS_MSK, regval); |
| } |
| |
| /** |
| * adxl345_fifo_transfer() - Read samples number of elements. |
| * @st: The instance of the state object of this sensor. |
| * @samples: The number of lines in the FIFO referred to as fifo_entry. |
| * |
| * It is recommended that a multiple-byte read of all registers be performed to |
| * prevent a change in data between reads of sequential registers. That is to |
| * read out the data registers X0, X1, Y0, Y1, Z0, Z1, i.e. 6 bytes at once. |
| * |
| * Return: 0 or error value. |
| */ |
| static int adxl345_fifo_transfer(struct adxl345_state *st, int samples) |
| { |
| int i, ret = 0; |
| |
| for (i = 0; i < samples; i++) { |
| ret = regmap_bulk_read(st->regmap, ADXL345_REG_XYZ_BASE, |
| st->fifo_buf + (i * ADXL345_DIRS), |
| sizeof(st->fifo_buf[0]) * ADXL345_DIRS); |
| if (ret) |
| return ret; |
| |
| /* |
| * To ensure that the FIFO has completely popped, there must be at least 5 |
| * us between the end of reading the data registers, signified by the |
| * transition to register 0x38 from 0x37 or the CS pin going high, and the |
| * start of new reads of the FIFO or reading the FIFO_STATUS register. For |
| * SPI operation at 1.5 MHz or lower, the register addressing portion of the |
| * transmission is sufficient delay to ensure the FIFO has completely |
| * popped. It is necessary for SPI operation greater than 1.5 MHz to |
| * de-assert the CS pin to ensure a total of 5 us, which is at most 3.4 us |
| * at 5 MHz operation. |
| */ |
| if (st->fifo_delay && samples > 1) |
| udelay(3); |
| } |
| return ret; |
| } |
| |
| /** |
| * adxl345_fifo_reset() - Empty the FIFO in error condition. |
| * @st: The instance to the state object of the sensor. |
| * |
| * Read all elements of the FIFO. Reading the interrupt source register |
| * resets the sensor. |
| */ |
| static void adxl345_fifo_reset(struct adxl345_state *st) |
| { |
| int regval; |
| int samples; |
| |
| adxl345_set_measure_en(st, false); |
| |
| samples = adxl345_get_samples(st); |
| if (samples > 0) |
| adxl345_fifo_transfer(st, samples); |
| |
| regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, ®val); |
| |
| adxl345_set_measure_en(st, true); |
| } |
| |
| static int adxl345_buffer_postenable(struct iio_dev *indio_dev) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| |
| st->fifo_mode = ADXL345_FIFO_STREAM; |
| return adxl345_set_fifo(st); |
| } |
| |
| static int adxl345_buffer_predisable(struct iio_dev *indio_dev) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| st->fifo_mode = ADXL345_FIFO_BYPASS; |
| ret = adxl345_set_fifo(st); |
| if (ret) |
| return ret; |
| |
| return regmap_write(st->regmap, ADXL345_REG_INT_ENABLE, 0x00); |
| } |
| |
| static const struct iio_buffer_setup_ops adxl345_buffer_ops = { |
| .postenable = adxl345_buffer_postenable, |
| .predisable = adxl345_buffer_predisable, |
| }; |
| |
| static int adxl345_fifo_push(struct iio_dev *indio_dev, |
| int samples) |
| { |
| struct adxl345_state *st = iio_priv(indio_dev); |
| int i, ret; |
| |
| if (samples <= 0) |
| return -EINVAL; |
| |
| ret = adxl345_fifo_transfer(st, samples); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < ADXL345_DIRS * samples; i += ADXL345_DIRS) |
| iio_push_to_buffers(indio_dev, &st->fifo_buf[i]); |
| |
| return 0; |
| } |
| |
| static int adxl345_push_event(struct iio_dev *indio_dev, int int_stat, |
| enum iio_modifier act_dir, |
| enum iio_modifier tap_dir) |
| { |
| s64 ts = iio_get_time_ns(indio_dev); |
| struct adxl345_state *st = iio_priv(indio_dev); |
| unsigned int regval; |
| int samples; |
| int ret = -ENOENT; |
| |
| if (FIELD_GET(ADXL345_INT_SINGLE_TAP, int_stat)) { |
| ret = iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, tap_dir, |
| IIO_EV_TYPE_GESTURE, |
| IIO_EV_DIR_SINGLETAP), |
| ts); |
| if (ret) |
| return ret; |
| } |
| |
| if (FIELD_GET(ADXL345_INT_DOUBLE_TAP, int_stat)) { |
| ret = iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, tap_dir, |
| IIO_EV_TYPE_GESTURE, |
| IIO_EV_DIR_DOUBLETAP), |
| ts); |
| if (ret) |
| return ret; |
| } |
| |
| if (FIELD_GET(ADXL345_INT_ACTIVITY, int_stat)) { |
| ret = regmap_read(st->regmap, ADXL345_REG_ACT_INACT_CTRL, ®val); |
| if (ret) |
| return ret; |
| |
| if (FIELD_GET(ADXL345_REG_ACT_ACDC, regval)) { |
| /* AC coupled */ |
| ret = iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, act_dir, |
| IIO_EV_TYPE_MAG_ADAPTIVE, |
| IIO_EV_DIR_RISING), |
| ts); |
| |
| } else { |
| /* DC coupled, relying on THRESH */ |
| ret = iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, act_dir, |
| IIO_EV_TYPE_MAG, |
| IIO_EV_DIR_RISING), |
| ts); |
| } |
| if (ret) |
| return ret; |
| } |
| |
| if (FIELD_GET(ADXL345_INT_INACTIVITY, int_stat)) { |
| ret = regmap_read(st->regmap, ADXL345_REG_ACT_INACT_CTRL, ®val); |
| if (ret) |
| return ret; |
| |
| if (FIELD_GET(ADXL345_REG_INACT_ACDC, regval)) { |
| /* AC coupled */ |
| ret = iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, |
| IIO_MOD_X_AND_Y_AND_Z, |
| IIO_EV_TYPE_MAG_ADAPTIVE, |
| IIO_EV_DIR_FALLING), |
| ts); |
| } else { |
| /* DC coupled, relying on THRESH */ |
| ret = iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, |
| IIO_MOD_X_AND_Y_AND_Z, |
| IIO_EV_TYPE_MAG, |
| IIO_EV_DIR_FALLING), |
| ts); |
| } |
| if (ret) |
| return ret; |
| } |
| |
| if (FIELD_GET(ADXL345_INT_FREE_FALL, int_stat)) { |
| ret = iio_push_event(indio_dev, |
| IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, |
| IIO_MOD_X_AND_Y_AND_Z, |
| IIO_EV_TYPE_MAG, |
| IIO_EV_DIR_FALLING), |
| ts); |
| if (ret) |
| return ret; |
| } |
| |
| if (FIELD_GET(ADXL345_INT_WATERMARK, int_stat)) { |
| samples = adxl345_get_samples(st); |
| if (samples < 0) |
| return -EINVAL; |
| |
| if (adxl345_fifo_push(indio_dev, samples) < 0) |
| return -EINVAL; |
| |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * adxl345_irq_handler() - Handle irqs of the ADXL345. |
| * @irq: The irq being handled. |
| * @p: The struct iio_device pointer for the device. |
| * |
| * Return: The interrupt was handled. |
| */ |
| static irqreturn_t adxl345_irq_handler(int irq, void *p) |
| { |
| struct iio_dev *indio_dev = p; |
| struct adxl345_state *st = iio_priv(indio_dev); |
| unsigned int regval; |
| enum iio_modifier tap_dir = IIO_NO_MOD; |
| enum iio_modifier act_dir = IIO_NO_MOD; |
| u32 axis_ctrl; |
| int int_stat; |
| int ret; |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_TAP_AXIS, &axis_ctrl); |
| if (ret) |
| return IRQ_NONE; |
| |
| if (FIELD_GET(ADXL345_REG_TAP_AXIS_MSK, axis_ctrl) || |
| FIELD_GET(ADXL345_ACT_XYZ_EN, axis_ctrl)) { |
| ret = regmap_read(st->regmap, ADXL345_REG_ACT_TAP_STATUS, ®val); |
| if (ret) |
| return IRQ_NONE; |
| |
| if (FIELD_GET(ADXL345_TAP_Z_EN, regval)) |
| tap_dir = IIO_MOD_Z; |
| else if (FIELD_GET(ADXL345_TAP_Y_EN, regval)) |
| tap_dir = IIO_MOD_Y; |
| else if (FIELD_GET(ADXL345_TAP_X_EN, regval)) |
| tap_dir = IIO_MOD_X; |
| |
| if (FIELD_GET(ADXL345_ACT_Z_EN, regval)) |
| act_dir = IIO_MOD_Z; |
| else if (FIELD_GET(ADXL345_ACT_Y_EN, regval)) |
| act_dir = IIO_MOD_Y; |
| else if (FIELD_GET(ADXL345_ACT_X_EN, regval)) |
| act_dir = IIO_MOD_X; |
| } |
| |
| if (regmap_read(st->regmap, ADXL345_REG_INT_SOURCE, &int_stat)) |
| return IRQ_NONE; |
| |
| if (adxl345_push_event(indio_dev, int_stat, act_dir, tap_dir)) |
| goto err; |
| |
| if (FIELD_GET(ADXL345_INT_OVERRUN, int_stat)) |
| goto err; |
| |
| return IRQ_HANDLED; |
| |
| err: |
| adxl345_fifo_reset(st); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct iio_info adxl345_info = { |
| .read_raw = adxl345_read_raw, |
| .write_raw = adxl345_write_raw, |
| .read_avail = adxl345_read_avail, |
| .write_raw_get_fmt = adxl345_write_raw_get_fmt, |
| .read_event_config = adxl345_read_event_config, |
| .write_event_config = adxl345_write_event_config, |
| .read_event_value = adxl345_read_event_value, |
| .write_event_value = adxl345_write_event_value, |
| .debugfs_reg_access = &adxl345_reg_access, |
| .hwfifo_set_watermark = adxl345_set_watermark, |
| }; |
| |
| static int adxl345_get_int_line(struct device *dev, int *irq) |
| { |
| *irq = fwnode_irq_get_byname(dev_fwnode(dev), "INT1"); |
| if (*irq > 0) |
| return ADXL345_INT1; |
| |
| *irq = fwnode_irq_get_byname(dev_fwnode(dev), "INT2"); |
| if (*irq > 0) |
| return ADXL345_INT2; |
| |
| return ADXL345_INT_NONE; |
| } |
| |
| /** |
| * adxl345_core_probe() - Probe and setup for the accelerometer. |
| * @dev: Driver model representation of the device |
| * @regmap: Regmap instance for the device |
| * @fifo_delay_default: Using FIFO with SPI needs delay |
| * @setup: Setup routine to be executed right before the standard device |
| * setup |
| * |
| * For SPI operation greater than 1.6 MHz, it is necessary to deassert the CS |
| * pin to ensure a total delay of 5 us; otherwise, the delay is not sufficient. |
| * The total delay necessary for 5 MHz operation is at most 3.4 us. This is not |
| * a concern when using I2C mode because the communication rate is low enough |
| * to ensure a sufficient delay between FIFO reads. |
| * Ref: "Retrieving Data from FIFO", p. 21 of 36, Data Sheet ADXL345 Rev. G |
| * |
| * Return: 0 on success, negative errno on error |
| */ |
| int adxl345_core_probe(struct device *dev, struct regmap *regmap, |
| bool fifo_delay_default, |
| int (*setup)(struct device*, struct regmap*)) |
| { |
| struct adxl345_state *st; |
| struct iio_dev *indio_dev; |
| u32 regval; |
| u8 intio = ADXL345_INT1; |
| unsigned int data_format_mask = (ADXL345_DATA_FORMAT_RANGE | |
| ADXL345_DATA_FORMAT_JUSTIFY | |
| ADXL345_DATA_FORMAT_FULL_RES | |
| ADXL345_DATA_FORMAT_SELF_TEST); |
| unsigned int tap_threshold; |
| int irq; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| st->regmap = regmap; |
| st->info = device_get_match_data(dev); |
| if (!st->info) |
| return -ENODEV; |
| st->fifo_delay = fifo_delay_default; |
| |
| /* Init with reasonable values */ |
| tap_threshold = 48; /* 48 [0x30] -> ~3g */ |
| st->tap_duration_us = 16; /* 16 [0x10] -> .010 */ |
| st->tap_window_us = 64; /* 64 [0x40] -> .080 */ |
| st->tap_latent_us = 16; /* 16 [0x10] -> .020 */ |
| |
| indio_dev->name = st->info->name; |
| indio_dev->info = &adxl345_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = adxl345_channels; |
| indio_dev->num_channels = ARRAY_SIZE(adxl345_channels); |
| indio_dev->available_scan_masks = adxl345_scan_masks; |
| |
| /* |
| * Using I2C at 100kHz would limit the maximum ODR to 200Hz, operation |
| * at an output rate above the recommended maximum may result in |
| * undesired behavior. |
| */ |
| ret = adxl345_set_odr(st, ADXL345_ODR_200HZ); |
| if (ret) |
| return ret; |
| |
| ret = adxl345_set_range(st, ADXL345_16G_RANGE); |
| if (ret) |
| return ret; |
| |
| /* Reset interrupts at start up */ |
| ret = regmap_write(st->regmap, ADXL345_REG_INT_ENABLE, 0x00); |
| if (ret) |
| return ret; |
| |
| if (setup) { |
| /* Perform optional initial bus specific configuration */ |
| ret = setup(dev, st->regmap); |
| if (ret) |
| return ret; |
| |
| /* Enable full-resolution mode */ |
| ret = regmap_update_bits(st->regmap, ADXL345_REG_DATA_FORMAT, |
| data_format_mask, |
| ADXL345_DATA_FORMAT_FULL_RES); |
| if (ret) |
| return dev_err_probe(dev, ret, |
| "Failed to set data range\n"); |
| |
| } else { |
| /* Enable full-resolution mode (init all data_format bits) */ |
| ret = regmap_write(st->regmap, ADXL345_REG_DATA_FORMAT, |
| ADXL345_DATA_FORMAT_FULL_RES); |
| if (ret) |
| return dev_err_probe(dev, ret, |
| "Failed to set data range\n"); |
| } |
| |
| ret = regmap_read(st->regmap, ADXL345_REG_DEVID, ®val); |
| if (ret) |
| return dev_err_probe(dev, ret, "Error reading device ID\n"); |
| |
| if (regval != ADXL345_DEVID) |
| return dev_err_probe(dev, -ENODEV, "Invalid device ID: %x, expected %x\n", |
| regval, ADXL345_DEVID); |
| |
| /* Enable measurement mode */ |
| ret = adxl345_set_measure_en(st, true); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to enable measurement mode\n"); |
| |
| ret = devm_add_action_or_reset(dev, adxl345_powerdown, st); |
| if (ret) |
| return ret; |
| |
| intio = adxl345_get_int_line(dev, &irq); |
| if (intio != ADXL345_INT_NONE) { |
| /* |
| * In the INT map register, bits set to 0 route their |
| * corresponding interrupts to the INT1 pin, while bits set to 1 |
| * route them to the INT2 pin. The intio should handle this |
| * mapping accordingly. |
| */ |
| ret = regmap_assign_bits(st->regmap, ADXL345_REG_INT_MAP, |
| U8_MAX, intio); |
| if (ret) |
| return ret; |
| |
| /* |
| * Initialized with sensible default values to streamline |
| * sensor operation. These defaults are partly derived from |
| * the previous input driver for the ADXL345 and partly |
| * based on the recommendations provided in the datasheet. |
| */ |
| ret = regmap_write(st->regmap, ADXL345_REG_ACT_INACT_CTRL, 0); |
| if (ret) |
| return ret; |
| |
| ret = regmap_write(st->regmap, ADXL345_REG_THRESH_ACT, 6); |
| if (ret) |
| return ret; |
| |
| ret = adxl345_set_inact_threshold(st, 4); |
| if (ret) |
| return ret; |
| |
| ret = regmap_write(st->regmap, ADXL345_REG_THRESH_TAP, tap_threshold); |
| if (ret) |
| return ret; |
| |
| /* FIFO_STREAM mode is going to be activated later */ |
| ret = devm_iio_kfifo_buffer_setup(dev, indio_dev, &adxl345_buffer_ops); |
| if (ret) |
| return ret; |
| |
| ret = devm_request_threaded_irq(dev, irq, NULL, |
| &adxl345_irq_handler, |
| IRQF_SHARED | IRQF_ONESHOT, |
| indio_dev->name, indio_dev); |
| if (ret) |
| return ret; |
| } else { |
| ret = regmap_write(st->regmap, ADXL345_REG_FIFO_CTL, |
| FIELD_PREP(ADXL345_FIFO_CTL_MODE_MSK, |
| ADXL345_FIFO_BYPASS)); |
| if (ret) |
| return ret; |
| } |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| EXPORT_SYMBOL_NS_GPL(adxl345_core_probe, "IIO_ADXL345"); |
| |
| MODULE_AUTHOR("Eva Rachel Retuya <eraretuya@gmail.com>"); |
| MODULE_DESCRIPTION("ADXL345 3-Axis Digital Accelerometer core driver"); |
| MODULE_LICENSE("GPL v2"); |