| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Universal Flash Storage Host controller driver Core | |
| * Copyright (C) 2011-2013 Samsung India Software Operations | |
| * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. | |
| * | |
| * Authors: | |
| * Santosh Yaraganavi <santosh.sy@samsung.com> | |
| * Vinayak Holikatti <h.vinayak@samsung.com> | |
| */ | |
| #include <linux/async.h> | |
| #include <linux/devfreq.h> | |
| #include <linux/nls.h> | |
| #include <linux/of.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/blk-pm.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/hex.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/module.h> | |
| #include <linux/pm_opp.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/sched/clock.h> | |
| #include <linux/sizes.h> | |
| #include <linux/iopoll.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/scsi_dbg.h> | |
| #include <scsi/scsi_driver.h> | |
| #include <scsi/scsi_eh.h> | |
| #include <scsi/scsi_tcq.h> | |
| #include "ufshcd-priv.h" | |
| #include <ufs/ufs_quirks.h> | |
| #include <ufs/unipro.h> | |
| #include "ufs-sysfs.h" | |
| #include "ufs-debugfs.h" | |
| #include "ufs-fault-injection.h" | |
| #include "ufs_bsg.h" | |
| #include "ufshcd-crypto.h" | |
| #include <linux/unaligned.h> | |
| #define CREATE_TRACE_POINTS | |
| #include "ufs_trace.h" | |
| #define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\ | |
| UTP_TASK_REQ_COMPL |\ | |
| UFSHCD_ERROR_MASK) | |
| /* UIC command timeout, unit: ms */ | |
| enum { | |
| UIC_CMD_TIMEOUT_DEFAULT = 500, | |
| UIC_CMD_TIMEOUT_MAX = 5000, | |
| }; | |
| /* NOP OUT retries waiting for NOP IN response */ | |
| #define NOP_OUT_RETRIES 10 | |
| /* Timeout after 50 msecs if NOP OUT hangs without response */ | |
| #define NOP_OUT_TIMEOUT 50 /* msecs */ | |
| /* Query request retries */ | |
| #define QUERY_REQ_RETRIES 3 | |
| /* Query request timeout */ | |
| enum { | |
| QUERY_REQ_TIMEOUT_MIN = 1, | |
| QUERY_REQ_TIMEOUT_DEFAULT = 1500, | |
| QUERY_REQ_TIMEOUT_MAX = 30000 | |
| }; | |
| /* Advanced RPMB request timeout */ | |
| #define ADVANCED_RPMB_REQ_TIMEOUT 3000 /* 3 seconds */ | |
| /* Task management command timeout */ | |
| #define TM_CMD_TIMEOUT 100 /* msecs */ | |
| /* maximum number of retries for a general UIC command */ | |
| #define UFS_UIC_COMMAND_RETRIES 3 | |
| /* maximum number of link-startup retries */ | |
| #define DME_LINKSTARTUP_RETRIES 3 | |
| /* maximum number of reset retries before giving up */ | |
| #define MAX_HOST_RESET_RETRIES 5 | |
| /* Maximum number of error handler retries before giving up */ | |
| #define MAX_ERR_HANDLER_RETRIES 5 | |
| /* Expose the flag value from utp_upiu_query.value */ | |
| #define MASK_QUERY_UPIU_FLAG_LOC 0xFF | |
| /* Interrupt aggregation default timeout, unit: 40us */ | |
| #define INT_AGGR_DEF_TO 0x02 | |
| /* default delay of autosuspend: 2000 ms */ | |
| #define RPM_AUTOSUSPEND_DELAY_MS 2000 | |
| /* Default delay of RPM device flush delayed work */ | |
| #define RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS 5000 | |
| /* Default value of wait time before gating device ref clock */ | |
| #define UFSHCD_REF_CLK_GATING_WAIT_US 0xFF /* microsecs */ | |
| /* Polling time to wait for fDeviceInit */ | |
| #define FDEVICEINIT_COMPL_TIMEOUT 1500 /* millisecs */ | |
| /* Default RTC update every 10 seconds */ | |
| #define UFS_RTC_UPDATE_INTERVAL_MS (10 * MSEC_PER_SEC) | |
| /* bMaxNumOfRTT is equal to two after device manufacturing */ | |
| #define DEFAULT_MAX_NUM_RTT 2 | |
| /* UFSHC 4.0 compliant HC support this mode. */ | |
| static bool use_mcq_mode = true; | |
| static bool is_mcq_supported(struct ufs_hba *hba) | |
| { | |
| return hba->mcq_sup && use_mcq_mode; | |
| } | |
| module_param(use_mcq_mode, bool, 0644); | |
| MODULE_PARM_DESC(use_mcq_mode, "Control MCQ mode for controllers starting from UFSHCI 4.0. 1 - enable MCQ, 0 - disable MCQ. MCQ is enabled by default"); | |
| static unsigned int uic_cmd_timeout = UIC_CMD_TIMEOUT_DEFAULT; | |
| static int uic_cmd_timeout_set(const char *val, const struct kernel_param *kp) | |
| { | |
| return param_set_uint_minmax(val, kp, UIC_CMD_TIMEOUT_DEFAULT, | |
| UIC_CMD_TIMEOUT_MAX); | |
| } | |
| static const struct kernel_param_ops uic_cmd_timeout_ops = { | |
| .set = uic_cmd_timeout_set, | |
| .get = param_get_uint, | |
| }; | |
| module_param_cb(uic_cmd_timeout, &uic_cmd_timeout_ops, &uic_cmd_timeout, 0644); | |
| MODULE_PARM_DESC(uic_cmd_timeout, | |
| "UFS UIC command timeout in milliseconds. Defaults to 500ms. Supported values range from 500ms to 5 seconds inclusively"); | |
| static unsigned int dev_cmd_timeout = QUERY_REQ_TIMEOUT_DEFAULT; | |
| static int dev_cmd_timeout_set(const char *val, const struct kernel_param *kp) | |
| { | |
| return param_set_uint_minmax(val, kp, QUERY_REQ_TIMEOUT_MIN, | |
| QUERY_REQ_TIMEOUT_MAX); | |
| } | |
| static const struct kernel_param_ops dev_cmd_timeout_ops = { | |
| .set = dev_cmd_timeout_set, | |
| .get = param_get_uint, | |
| }; | |
| module_param_cb(dev_cmd_timeout, &dev_cmd_timeout_ops, &dev_cmd_timeout, 0644); | |
| MODULE_PARM_DESC(dev_cmd_timeout, | |
| "UFS Device command timeout in milliseconds. Defaults to 1.5s. Supported values range from 1ms to 30 seconds inclusively"); | |
| #define ufshcd_toggle_vreg(_dev, _vreg, _on) \ | |
| ({ \ | |
| int _ret; \ | |
| if (_on) \ | |
| _ret = ufshcd_enable_vreg(_dev, _vreg); \ | |
| else \ | |
| _ret = ufshcd_disable_vreg(_dev, _vreg); \ | |
| _ret; \ | |
| }) | |
| #define ufshcd_hex_dump(prefix_str, buf, len) do { \ | |
| size_t __len = (len); \ | |
| print_hex_dump(KERN_ERR, prefix_str, \ | |
| __len > 4 ? DUMP_PREFIX_OFFSET : DUMP_PREFIX_NONE,\ | |
| 16, 4, buf, __len, false); \ | |
| } while (0) | |
| int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len, | |
| const char *prefix) | |
| { | |
| u32 *regs; | |
| size_t pos; | |
| if (offset % 4 != 0 || len % 4 != 0) /* keep readl happy */ | |
| return -EINVAL; | |
| regs = kzalloc(len, GFP_ATOMIC); | |
| if (!regs) | |
| return -ENOMEM; | |
| for (pos = 0; pos < len; pos += 4) { | |
| if (offset == 0 && | |
| pos >= REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER && | |
| pos <= REG_UIC_ERROR_CODE_DME) | |
| continue; | |
| regs[pos / 4] = ufshcd_readl(hba, offset + pos); | |
| } | |
| ufshcd_hex_dump(prefix, regs, len); | |
| kfree(regs); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_dump_regs); | |
| enum { | |
| UFSHCD_MAX_CHANNEL = 0, | |
| UFSHCD_MAX_ID = 1, | |
| }; | |
| static const char *const ufshcd_state_name[] = { | |
| [UFSHCD_STATE_RESET] = "reset", | |
| [UFSHCD_STATE_OPERATIONAL] = "operational", | |
| [UFSHCD_STATE_ERROR] = "error", | |
| [UFSHCD_STATE_EH_SCHEDULED_FATAL] = "eh_fatal", | |
| [UFSHCD_STATE_EH_SCHEDULED_NON_FATAL] = "eh_non_fatal", | |
| }; | |
| /* UFSHCD error handling flags */ | |
| enum { | |
| UFSHCD_EH_IN_PROGRESS = (1 << 0), | |
| }; | |
| /* UFSHCD UIC layer error flags */ | |
| enum { | |
| UFSHCD_UIC_DL_PA_INIT_ERROR = (1 << 0), /* Data link layer error */ | |
| UFSHCD_UIC_DL_NAC_RECEIVED_ERROR = (1 << 1), /* Data link layer error */ | |
| UFSHCD_UIC_DL_TCx_REPLAY_ERROR = (1 << 2), /* Data link layer error */ | |
| UFSHCD_UIC_NL_ERROR = (1 << 3), /* Network layer error */ | |
| UFSHCD_UIC_TL_ERROR = (1 << 4), /* Transport Layer error */ | |
| UFSHCD_UIC_DME_ERROR = (1 << 5), /* DME error */ | |
| UFSHCD_UIC_PA_GENERIC_ERROR = (1 << 6), /* Generic PA error */ | |
| }; | |
| #define ufshcd_set_eh_in_progress(h) \ | |
| ((h)->eh_flags |= UFSHCD_EH_IN_PROGRESS) | |
| #define ufshcd_eh_in_progress(h) \ | |
| ((h)->eh_flags & UFSHCD_EH_IN_PROGRESS) | |
| #define ufshcd_clear_eh_in_progress(h) \ | |
| ((h)->eh_flags &= ~UFSHCD_EH_IN_PROGRESS) | |
| const struct ufs_pm_lvl_states ufs_pm_lvl_states[] = { | |
| [UFS_PM_LVL_0] = {UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE}, | |
| [UFS_PM_LVL_1] = {UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE}, | |
| [UFS_PM_LVL_2] = {UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE}, | |
| [UFS_PM_LVL_3] = {UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE}, | |
| [UFS_PM_LVL_4] = {UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE}, | |
| [UFS_PM_LVL_5] = {UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE}, | |
| /* | |
| * For DeepSleep, the link is first put in hibern8 and then off. | |
| * Leaving the link in hibern8 is not supported. | |
| */ | |
| [UFS_PM_LVL_6] = {UFS_DEEPSLEEP_PWR_MODE, UIC_LINK_OFF_STATE}, | |
| }; | |
| static inline enum ufs_dev_pwr_mode | |
| ufs_get_pm_lvl_to_dev_pwr_mode(enum ufs_pm_level lvl) | |
| { | |
| return ufs_pm_lvl_states[lvl].dev_state; | |
| } | |
| static inline enum uic_link_state | |
| ufs_get_pm_lvl_to_link_pwr_state(enum ufs_pm_level lvl) | |
| { | |
| return ufs_pm_lvl_states[lvl].link_state; | |
| } | |
| static inline enum ufs_pm_level | |
| ufs_get_desired_pm_lvl_for_dev_link_state(enum ufs_dev_pwr_mode dev_state, | |
| enum uic_link_state link_state) | |
| { | |
| enum ufs_pm_level lvl; | |
| for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++) { | |
| if ((ufs_pm_lvl_states[lvl].dev_state == dev_state) && | |
| (ufs_pm_lvl_states[lvl].link_state == link_state)) | |
| return lvl; | |
| } | |
| /* if no match found, return the level 0 */ | |
| return UFS_PM_LVL_0; | |
| } | |
| static bool ufshcd_has_pending_tasks(struct ufs_hba *hba) | |
| { | |
| return hba->outstanding_tasks || hba->active_uic_cmd || | |
| hba->uic_async_done; | |
| } | |
| static bool ufshcd_is_ufs_dev_busy(struct ufs_hba *hba) | |
| { | |
| return (hba->scsi_host_added && scsi_host_busy(hba->host)) || | |
| ufshcd_has_pending_tasks(hba); | |
| } | |
| static const struct ufs_dev_quirk ufs_fixups[] = { | |
| /* UFS cards deviations table */ | |
| { .wmanufacturerid = UFS_VENDOR_MICRON, | |
| .model = UFS_ANY_MODEL, | |
| .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM }, | |
| { .wmanufacturerid = UFS_VENDOR_SAMSUNG, | |
| .model = UFS_ANY_MODEL, | |
| .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM | | |
| UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE | | |
| UFS_DEVICE_QUIRK_PA_HIBER8TIME | | |
| UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS }, | |
| { .wmanufacturerid = UFS_VENDOR_SKHYNIX, | |
| .model = UFS_ANY_MODEL, | |
| .quirk = UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME }, | |
| { .wmanufacturerid = UFS_VENDOR_SKHYNIX, | |
| .model = "hB8aL1" /*H28U62301AMR*/, | |
| .quirk = UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME }, | |
| { .wmanufacturerid = UFS_VENDOR_TOSHIBA, | |
| .model = UFS_ANY_MODEL, | |
| .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM }, | |
| { .wmanufacturerid = UFS_VENDOR_TOSHIBA, | |
| .model = "THGLF2G9C8KBADG", | |
| .quirk = UFS_DEVICE_QUIRK_PA_TACTIVATE }, | |
| { .wmanufacturerid = UFS_VENDOR_TOSHIBA, | |
| .model = "THGLF2G9D8KBADG", | |
| .quirk = UFS_DEVICE_QUIRK_PA_TACTIVATE }, | |
| { .wmanufacturerid = UFS_VENDOR_TOSHIBA, | |
| .model = "THGJFJT0E25BAIP", | |
| .quirk = UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT }, | |
| { .wmanufacturerid = UFS_VENDOR_TOSHIBA, | |
| .model = "THGJFJT1E45BATP", | |
| .quirk = UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT }, | |
| {} | |
| }; | |
| static irqreturn_t ufshcd_tmc_handler(struct ufs_hba *hba); | |
| static void ufshcd_async_scan(void *data, async_cookie_t cookie); | |
| static int ufshcd_reset_and_restore(struct ufs_hba *hba); | |
| static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd); | |
| static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); | |
| static void ufshcd_hba_exit(struct ufs_hba *hba); | |
| static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params); | |
| static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params); | |
| static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); | |
| static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba); | |
| static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); | |
| static void ufshcd_resume_clkscaling(struct ufs_hba *hba); | |
| static void ufshcd_suspend_clkscaling(struct ufs_hba *hba); | |
| static irqreturn_t ufshcd_intr(int irq, void *__hba); | |
| static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on); | |
| static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on); | |
| static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, | |
| struct ufs_vreg *vreg); | |
| static void ufshcd_wb_toggle_buf_flush_during_h8(struct ufs_hba *hba, | |
| bool enable); | |
| static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba); | |
| static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba); | |
| void ufshcd_enable_irq(struct ufs_hba *hba) | |
| { | |
| if (!hba->is_irq_enabled) { | |
| enable_irq(hba->irq); | |
| hba->is_irq_enabled = true; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_enable_irq); | |
| void ufshcd_disable_irq(struct ufs_hba *hba) | |
| { | |
| if (hba->is_irq_enabled) { | |
| disable_irq(hba->irq); | |
| hba->is_irq_enabled = false; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_disable_irq); | |
| /** | |
| * ufshcd_enable_intr - enable interrupts | |
| * @hba: per adapter instance | |
| * @intrs: interrupt bits | |
| */ | |
| void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs) | |
| { | |
| u32 old_val = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); | |
| u32 new_val = old_val | intrs; | |
| if (new_val != old_val) | |
| ufshcd_writel(hba, new_val, REG_INTERRUPT_ENABLE); | |
| } | |
| /** | |
| * ufshcd_disable_intr - disable interrupts | |
| * @hba: per adapter instance | |
| * @intrs: interrupt bits | |
| */ | |
| static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs) | |
| { | |
| u32 old_val = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); | |
| u32 new_val = old_val & ~intrs; | |
| if (new_val != old_val) | |
| ufshcd_writel(hba, new_val, REG_INTERRUPT_ENABLE); | |
| } | |
| static void ufshcd_configure_wb(struct ufs_hba *hba) | |
| { | |
| if (!ufshcd_is_wb_allowed(hba)) | |
| return; | |
| ufshcd_wb_toggle(hba, true); | |
| ufshcd_wb_toggle_buf_flush_during_h8(hba, true); | |
| if (ufshcd_is_wb_buf_flush_allowed(hba)) | |
| ufshcd_wb_toggle_buf_flush(hba, true); | |
| } | |
| static void ufshcd_add_cmd_upiu_trace(struct ufs_hba *hba, | |
| struct ufshcd_lrb *lrb, | |
| enum ufs_trace_str_t str_t) | |
| { | |
| struct utp_upiu_req *rq = lrb->ucd_req_ptr; | |
| struct utp_upiu_header *header; | |
| if (!trace_ufshcd_upiu_enabled()) | |
| return; | |
| if (str_t == UFS_CMD_SEND) | |
| header = &rq->header; | |
| else | |
| header = &lrb->ucd_rsp_ptr->header; | |
| trace_ufshcd_upiu(hba, str_t, header, &rq->sc.cdb, | |
| UFS_TSF_CDB); | |
| } | |
| static void ufshcd_add_query_upiu_trace(struct ufs_hba *hba, | |
| enum ufs_trace_str_t str_t, | |
| struct utp_upiu_req *rq_rsp) | |
| { | |
| if (!trace_ufshcd_upiu_enabled()) | |
| return; | |
| trace_ufshcd_upiu(hba, str_t, &rq_rsp->header, | |
| &rq_rsp->qr, UFS_TSF_OSF); | |
| } | |
| static void ufshcd_add_tm_upiu_trace(struct ufs_hba *hba, unsigned int tag, | |
| enum ufs_trace_str_t str_t) | |
| { | |
| struct utp_task_req_desc *descp = &hba->utmrdl_base_addr[tag]; | |
| if (!trace_ufshcd_upiu_enabled()) | |
| return; | |
| if (str_t == UFS_TM_SEND) | |
| trace_ufshcd_upiu(hba, str_t, | |
| &descp->upiu_req.req_header, | |
| &descp->upiu_req.input_param1, | |
| UFS_TSF_TM_INPUT); | |
| else | |
| trace_ufshcd_upiu(hba, str_t, | |
| &descp->upiu_rsp.rsp_header, | |
| &descp->upiu_rsp.output_param1, | |
| UFS_TSF_TM_OUTPUT); | |
| } | |
| static void ufshcd_add_uic_command_trace(struct ufs_hba *hba, | |
| const struct uic_command *ucmd, | |
| enum ufs_trace_str_t str_t) | |
| { | |
| u32 cmd, arg1, arg2, arg3; | |
| if (!trace_ufshcd_uic_command_enabled()) | |
| return; | |
| if (str_t == UFS_CMD_SEND) { | |
| cmd = ucmd->command; | |
| arg1 = ucmd->argument1; | |
| arg2 = ucmd->argument2; | |
| arg3 = ucmd->argument3; | |
| } else { | |
| cmd = ufshcd_readl(hba, REG_UIC_COMMAND); | |
| arg1 = ufshcd_readl(hba, REG_UIC_COMMAND_ARG_1); | |
| arg2 = ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2); | |
| arg3 = ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3); | |
| } | |
| trace_ufshcd_uic_command(hba, str_t, cmd, arg1, arg2, arg3); | |
| } | |
| static void ufshcd_add_command_trace(struct ufs_hba *hba, struct scsi_cmnd *cmd, | |
| enum ufs_trace_str_t str_t) | |
| { | |
| u64 lba = 0; | |
| u8 opcode = 0, group_id = 0; | |
| u32 doorbell = 0; | |
| u32 intr; | |
| u32 hwq_id = 0; | |
| struct request *rq = scsi_cmd_to_rq(cmd); | |
| unsigned int tag = rq->tag; | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| int transfer_len = -1; | |
| /* trace UPIU also */ | |
| ufshcd_add_cmd_upiu_trace(hba, lrbp, str_t); | |
| if (!trace_ufshcd_command_enabled()) | |
| return; | |
| opcode = cmd->cmnd[0]; | |
| if (opcode == READ_10 || opcode == WRITE_10) { | |
| /* | |
| * Currently we only fully trace read(10) and write(10) commands | |
| */ | |
| transfer_len = | |
| be32_to_cpu(lrbp->ucd_req_ptr->sc.exp_data_transfer_len); | |
| lba = scsi_get_lba(cmd); | |
| if (opcode == WRITE_10) | |
| group_id = cmd->cmnd[6]; | |
| } else if (opcode == UNMAP) { | |
| /* | |
| * The number of Bytes to be unmapped beginning with the lba. | |
| */ | |
| transfer_len = blk_rq_bytes(rq); | |
| lba = scsi_get_lba(cmd); | |
| } | |
| intr = ufshcd_readl(hba, REG_INTERRUPT_STATUS); | |
| if (hba->mcq_enabled) { | |
| struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, rq); | |
| if (hwq) | |
| hwq_id = hwq->id; | |
| } else { | |
| doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); | |
| } | |
| trace_ufshcd_command(cmd->device, hba, str_t, tag, doorbell, hwq_id, | |
| transfer_len, intr, lba, opcode, group_id); | |
| } | |
| static void ufshcd_print_clk_freqs(struct ufs_hba *hba) | |
| { | |
| struct ufs_clk_info *clki; | |
| struct list_head *head = &hba->clk_list_head; | |
| if (list_empty(head)) | |
| return; | |
| list_for_each_entry(clki, head, list) { | |
| if (!IS_ERR_OR_NULL(clki->clk) && clki->min_freq && | |
| clki->max_freq) | |
| dev_err(hba->dev, "clk: %s, rate: %u\n", | |
| clki->name, clki->curr_freq); | |
| } | |
| } | |
| static void ufshcd_print_evt(struct ufs_hba *hba, u32 id, | |
| const char *err_name) | |
| { | |
| int i; | |
| bool found = false; | |
| const struct ufs_event_hist *e; | |
| if (id >= UFS_EVT_CNT) | |
| return; | |
| e = &hba->ufs_stats.event[id]; | |
| for (i = 0; i < UFS_EVENT_HIST_LENGTH; i++) { | |
| int p = (i + e->pos) % UFS_EVENT_HIST_LENGTH; | |
| if (e->tstamp[p] == 0) | |
| continue; | |
| dev_err(hba->dev, "%s[%d] = 0x%x at %lld us\n", err_name, p, | |
| e->val[p], div_u64(e->tstamp[p], 1000)); | |
| found = true; | |
| } | |
| if (!found) | |
| dev_err(hba->dev, "No record of %s\n", err_name); | |
| else | |
| dev_err(hba->dev, "%s: total cnt=%llu\n", err_name, e->cnt); | |
| } | |
| static void ufshcd_print_evt_hist(struct ufs_hba *hba) | |
| { | |
| ufshcd_dump_regs(hba, 0, UFSHCI_REG_SPACE_SIZE, "host_regs: "); | |
| ufshcd_print_evt(hba, UFS_EVT_PA_ERR, "pa_err"); | |
| ufshcd_print_evt(hba, UFS_EVT_DL_ERR, "dl_err"); | |
| ufshcd_print_evt(hba, UFS_EVT_NL_ERR, "nl_err"); | |
| ufshcd_print_evt(hba, UFS_EVT_TL_ERR, "tl_err"); | |
| ufshcd_print_evt(hba, UFS_EVT_DME_ERR, "dme_err"); | |
| ufshcd_print_evt(hba, UFS_EVT_AUTO_HIBERN8_ERR, | |
| "auto_hibern8_err"); | |
| ufshcd_print_evt(hba, UFS_EVT_FATAL_ERR, "fatal_err"); | |
| ufshcd_print_evt(hba, UFS_EVT_LINK_STARTUP_FAIL, | |
| "link_startup_fail"); | |
| ufshcd_print_evt(hba, UFS_EVT_RESUME_ERR, "resume_fail"); | |
| ufshcd_print_evt(hba, UFS_EVT_SUSPEND_ERR, | |
| "suspend_fail"); | |
| ufshcd_print_evt(hba, UFS_EVT_WL_RES_ERR, "wlun resume_fail"); | |
| ufshcd_print_evt(hba, UFS_EVT_WL_SUSP_ERR, | |
| "wlun suspend_fail"); | |
| ufshcd_print_evt(hba, UFS_EVT_DEV_RESET, "dev_reset"); | |
| ufshcd_print_evt(hba, UFS_EVT_HOST_RESET, "host_reset"); | |
| ufshcd_print_evt(hba, UFS_EVT_ABORT, "task_abort"); | |
| ufshcd_vops_dbg_register_dump(hba); | |
| } | |
| static void ufshcd_print_tr(struct ufs_hba *hba, struct scsi_cmnd *cmd, | |
| bool pr_prdt) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| const int tag = scsi_cmd_to_rq(cmd)->tag; | |
| int prdt_length; | |
| if (hba->monitor.enabled) { | |
| dev_err(hba->dev, "UPIU[%d] - issue time %lld us\n", tag, | |
| div_u64(lrbp->issue_time_stamp_local_clock, 1000)); | |
| dev_err(hba->dev, "UPIU[%d] - complete time %lld us\n", tag, | |
| div_u64(lrbp->compl_time_stamp_local_clock, 1000)); | |
| } | |
| dev_err(hba->dev, | |
| "UPIU[%d] - Transfer Request Descriptor phys@0x%llx\n", | |
| tag, (u64)lrbp->utrd_dma_addr); | |
| ufshcd_hex_dump("UPIU TRD: ", lrbp->utr_descriptor_ptr, | |
| sizeof(struct utp_transfer_req_desc)); | |
| dev_err(hba->dev, "UPIU[%d] - Request UPIU phys@0x%llx\n", tag, | |
| (u64)lrbp->ucd_req_dma_addr); | |
| ufshcd_hex_dump("UPIU REQ: ", lrbp->ucd_req_ptr, | |
| sizeof(struct utp_upiu_req)); | |
| dev_err(hba->dev, "UPIU[%d] - Response UPIU phys@0x%llx\n", tag, | |
| (u64)lrbp->ucd_rsp_dma_addr); | |
| ufshcd_hex_dump("UPIU RSP: ", lrbp->ucd_rsp_ptr, | |
| sizeof(struct utp_upiu_rsp)); | |
| prdt_length = le16_to_cpu( | |
| lrbp->utr_descriptor_ptr->prd_table_length); | |
| if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) | |
| prdt_length /= ufshcd_sg_entry_size(hba); | |
| dev_err(hba->dev, | |
| "UPIU[%d] - PRDT - %d entries phys@0x%llx\n", | |
| tag, prdt_length, | |
| (u64)lrbp->ucd_prdt_dma_addr); | |
| if (pr_prdt) | |
| ufshcd_hex_dump("UPIU PRDT: ", lrbp->ucd_prdt_ptr, | |
| ufshcd_sg_entry_size(hba) * prdt_length); | |
| } | |
| static bool ufshcd_print_tr_iter(struct request *req, void *priv) | |
| { | |
| struct scsi_device *sdev = req->q->queuedata; | |
| struct Scsi_Host *shost = sdev->host; | |
| struct ufs_hba *hba = shost_priv(shost); | |
| if (!blk_mq_is_reserved_rq(req)) | |
| ufshcd_print_tr(hba, blk_mq_rq_to_pdu(req), *(bool *)priv); | |
| return true; | |
| } | |
| /** | |
| * ufshcd_print_trs_all - print trs for all started requests. | |
| * @hba: per-adapter instance. | |
| * @pr_prdt: need to print prdt or not. | |
| */ | |
| static void ufshcd_print_trs_all(struct ufs_hba *hba, bool pr_prdt) | |
| { | |
| blk_mq_tagset_busy_iter(&hba->host->tag_set, ufshcd_print_tr_iter, &pr_prdt); | |
| } | |
| static void ufshcd_print_tmrs(struct ufs_hba *hba, unsigned long bitmap) | |
| { | |
| int tag; | |
| for_each_set_bit(tag, &bitmap, hba->nutmrs) { | |
| struct utp_task_req_desc *tmrdp = &hba->utmrdl_base_addr[tag]; | |
| dev_err(hba->dev, "TM[%d] - Task Management Header\n", tag); | |
| ufshcd_hex_dump("", tmrdp, sizeof(*tmrdp)); | |
| } | |
| } | |
| static void ufshcd_print_host_state(struct ufs_hba *hba) | |
| { | |
| const struct scsi_device *sdev_ufs = hba->ufs_device_wlun; | |
| dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state); | |
| dev_err(hba->dev, "%d outstanding reqs, tasks=0x%lx\n", | |
| hba->scsi_host_added ? scsi_host_busy(hba->host) : 0, | |
| hba->outstanding_tasks); | |
| dev_err(hba->dev, "saved_err=0x%x, saved_uic_err=0x%x\n", | |
| hba->saved_err, hba->saved_uic_err); | |
| dev_err(hba->dev, "Device power mode=%d, UIC link state=%d\n", | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| dev_err(hba->dev, "PM in progress=%d, sys. suspended=%d\n", | |
| hba->pm_op_in_progress, hba->is_sys_suspended); | |
| dev_err(hba->dev, "Auto BKOPS=%d, Host self-block=%d\n", | |
| hba->auto_bkops_enabled, hba->host->host_self_blocked); | |
| dev_err(hba->dev, "Clk gate=%d\n", hba->clk_gating.state); | |
| dev_err(hba->dev, | |
| "last_hibern8_exit_tstamp at %lld us, hibern8_exit_cnt=%d\n", | |
| div_u64(hba->ufs_stats.last_hibern8_exit_tstamp, 1000), | |
| hba->ufs_stats.hibern8_exit_cnt); | |
| dev_err(hba->dev, "error handling flags=0x%x, req. abort count=%d\n", | |
| hba->eh_flags, hba->req_abort_count); | |
| dev_err(hba->dev, "hba->ufs_version=0x%x, Host capabilities=0x%x, caps=0x%x\n", | |
| hba->ufs_version, hba->capabilities, hba->caps); | |
| dev_err(hba->dev, "quirks=0x%x, dev. quirks=0x%x\n", hba->quirks, | |
| hba->dev_quirks); | |
| if (sdev_ufs) | |
| dev_err(hba->dev, "UFS dev info: %.8s %.16s rev %.4s\n", | |
| sdev_ufs->vendor, sdev_ufs->model, sdev_ufs->rev); | |
| ufshcd_print_clk_freqs(hba); | |
| } | |
| /** | |
| * ufshcd_print_pwr_info - print power params as saved in hba | |
| * power info | |
| * @hba: per-adapter instance | |
| */ | |
| static void ufshcd_print_pwr_info(struct ufs_hba *hba) | |
| { | |
| static const char * const names[] = { | |
| "INVALID MODE", | |
| "FAST MODE", | |
| "SLOW_MODE", | |
| "INVALID MODE", | |
| "FASTAUTO_MODE", | |
| "SLOWAUTO_MODE", | |
| "INVALID MODE", | |
| }; | |
| /* | |
| * Using dev_dbg to avoid messages during runtime PM to avoid | |
| * never-ending cycles of messages written back to storage by user space | |
| * causing runtime resume, causing more messages and so on. | |
| */ | |
| dev_dbg(hba->dev, "%s:[RX, TX]: gear=[%d, %d], lane[%d, %d], pwr[%s, %s], rate = %d\n", | |
| __func__, | |
| hba->pwr_info.gear_rx, hba->pwr_info.gear_tx, | |
| hba->pwr_info.lane_rx, hba->pwr_info.lane_tx, | |
| names[hba->pwr_info.pwr_rx], | |
| names[hba->pwr_info.pwr_tx], | |
| hba->pwr_info.hs_rate); | |
| } | |
| static void ufshcd_device_reset(struct ufs_hba *hba) | |
| { | |
| int err; | |
| err = ufshcd_vops_device_reset(hba); | |
| if (!err) { | |
| ufshcd_set_ufs_dev_active(hba); | |
| if (ufshcd_is_wb_allowed(hba)) { | |
| hba->dev_info.wb_enabled = false; | |
| hba->dev_info.wb_buf_flush_enabled = false; | |
| } | |
| if (hba->dev_info.rtc_type == UFS_RTC_RELATIVE) | |
| hba->dev_info.rtc_time_baseline = 0; | |
| } | |
| if (err != -EOPNOTSUPP) | |
| ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, err); | |
| } | |
| void ufshcd_delay_us(unsigned long us, unsigned long tolerance) | |
| { | |
| if (!us) | |
| return; | |
| if (us < 10) | |
| udelay(us); | |
| else | |
| usleep_range(us, us + tolerance); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_delay_us); | |
| /** | |
| * ufshcd_wait_for_register - wait for register value to change | |
| * @hba: per-adapter interface | |
| * @reg: mmio register offset | |
| * @mask: mask to apply to the read register value | |
| * @val: value to wait for | |
| * @interval_us: polling interval in microseconds | |
| * @timeout_ms: timeout in milliseconds | |
| * | |
| * Return: -ETIMEDOUT on error, zero on success. | |
| */ | |
| static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, | |
| u32 val, unsigned long interval_us, | |
| unsigned long timeout_ms) | |
| { | |
| u32 v; | |
| val &= mask; /* ignore bits that we don't intend to wait on */ | |
| return read_poll_timeout(ufshcd_readl, v, (v & mask) == val, | |
| interval_us, timeout_ms * 1000, false, hba, reg); | |
| } | |
| /** | |
| * ufshcd_get_intr_mask - Get the interrupt bit mask | |
| * @hba: Pointer to adapter instance | |
| * | |
| * Return: interrupt bit mask per version | |
| */ | |
| static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba) | |
| { | |
| if (hba->ufs_version <= ufshci_version(2, 0)) | |
| return INTERRUPT_MASK_ALL_VER_11; | |
| return INTERRUPT_MASK_ALL_VER_21; | |
| } | |
| /** | |
| * ufshcd_get_ufs_version - Get the UFS version supported by the HBA | |
| * @hba: Pointer to adapter instance | |
| * | |
| * Return: UFSHCI version supported by the controller | |
| */ | |
| static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba) | |
| { | |
| u32 ufshci_ver; | |
| if (hba->quirks & UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION) | |
| ufshci_ver = ufshcd_vops_get_ufs_hci_version(hba); | |
| else | |
| ufshci_ver = ufshcd_readl(hba, REG_UFS_VERSION); | |
| /* | |
| * UFSHCI v1.x uses a different version scheme, in order | |
| * to allow the use of comparisons with the ufshci_version | |
| * function, we convert it to the same scheme as ufs 2.0+. | |
| */ | |
| if (ufshci_ver & 0x00010000) | |
| return ufshci_version(1, ufshci_ver & 0x00000100); | |
| return ufshci_ver; | |
| } | |
| /** | |
| * ufshcd_is_device_present - Check if any device connected to | |
| * the host controller | |
| * @hba: pointer to adapter instance | |
| * | |
| * Return: true if device present, false if no device detected | |
| */ | |
| static inline bool ufshcd_is_device_present(struct ufs_hba *hba) | |
| { | |
| return ufshcd_readl(hba, REG_CONTROLLER_STATUS) & DEVICE_PRESENT; | |
| } | |
| /** | |
| * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status | |
| * @lrbp: pointer to local command reference block | |
| * @cqe: pointer to the completion queue entry | |
| * | |
| * This function is used to get the OCS field from UTRD | |
| * | |
| * Return: the OCS field in the UTRD. | |
| */ | |
| static enum utp_ocs ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp, | |
| struct cq_entry *cqe) | |
| { | |
| if (cqe) | |
| return cqe->overall_status & MASK_OCS; | |
| return lrbp->utr_descriptor_ptr->header.ocs & MASK_OCS; | |
| } | |
| /** | |
| * ufshcd_utrl_clear() - Clear requests from the controller request list. | |
| * @hba: per adapter instance | |
| * @mask: mask with one bit set for each request to be cleared | |
| */ | |
| static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 mask) | |
| { | |
| if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) | |
| mask = ~mask; | |
| /* | |
| * From the UFSHCI specification: "UTP Transfer Request List CLear | |
| * Register (UTRLCLR): This field is bit significant. Each bit | |
| * corresponds to a slot in the UTP Transfer Request List, where bit 0 | |
| * corresponds to request slot 0. A bit in this field is set to ‘0’ | |
| * by host software to indicate to the host controller that a transfer | |
| * request slot is cleared. The host controller | |
| * shall free up any resources associated to the request slot | |
| * immediately, and shall set the associated bit in UTRLDBR to ‘0’. The | |
| * host software indicates no change to request slots by setting the | |
| * associated bits in this field to ‘1’. Bits in this field shall only | |
| * be set ‘1’ or ‘0’ by host software when UTRLRSR is set to ‘1’." | |
| */ | |
| ufshcd_writel(hba, ~mask, REG_UTP_TRANSFER_REQ_LIST_CLEAR); | |
| } | |
| /** | |
| * ufshcd_utmrl_clear - Clear a bit in UTMRLCLR register | |
| * @hba: per adapter instance | |
| * @pos: position of the bit to be cleared | |
| */ | |
| static inline void ufshcd_utmrl_clear(struct ufs_hba *hba, u32 pos) | |
| { | |
| if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) | |
| ufshcd_writel(hba, (1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); | |
| else | |
| ufshcd_writel(hba, ~(1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); | |
| } | |
| /** | |
| * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY | |
| * @reg: Register value of host controller status | |
| * | |
| * Return: 0 on success; a positive value if failed. | |
| */ | |
| static inline int ufshcd_get_lists_status(u32 reg) | |
| { | |
| return !((reg & UFSHCD_STATUS_READY) == UFSHCD_STATUS_READY); | |
| } | |
| /** | |
| * ufshcd_get_req_rsp - returns the TR response transaction type | |
| * @ucd_rsp_ptr: pointer to response UPIU | |
| * | |
| * Return: UPIU type. | |
| */ | |
| static inline enum upiu_response_transaction | |
| ufshcd_get_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) | |
| { | |
| return ucd_rsp_ptr->header.transaction_code; | |
| } | |
| /** | |
| * ufshcd_is_exception_event - Check if the device raised an exception event | |
| * @ucd_rsp_ptr: pointer to response UPIU | |
| * | |
| * The function checks if the device raised an exception event indicated in | |
| * the Device Information field of response UPIU. | |
| * | |
| * Return: true if exception is raised, false otherwise. | |
| */ | |
| static inline bool ufshcd_is_exception_event(struct utp_upiu_rsp *ucd_rsp_ptr) | |
| { | |
| return ucd_rsp_ptr->header.device_information & 1; | |
| } | |
| /** | |
| * ufshcd_reset_intr_aggr - Reset interrupt aggregation values. | |
| * @hba: per adapter instance | |
| */ | |
| static inline void | |
| ufshcd_reset_intr_aggr(struct ufs_hba *hba) | |
| { | |
| ufshcd_writel(hba, INT_AGGR_ENABLE | | |
| INT_AGGR_COUNTER_AND_TIMER_RESET, | |
| REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); | |
| } | |
| /** | |
| * ufshcd_config_intr_aggr - Configure interrupt aggregation values. | |
| * @hba: per adapter instance | |
| * @cnt: Interrupt aggregation counter threshold | |
| * @tmout: Interrupt aggregation timeout value | |
| */ | |
| static inline void | |
| ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout) | |
| { | |
| ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE | | |
| INT_AGGR_COUNTER_THLD_VAL(cnt) | | |
| INT_AGGR_TIMEOUT_VAL(tmout), | |
| REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); | |
| } | |
| /** | |
| * ufshcd_disable_intr_aggr - Disables interrupt aggregation. | |
| * @hba: per adapter instance | |
| */ | |
| static inline void ufshcd_disable_intr_aggr(struct ufs_hba *hba) | |
| { | |
| ufshcd_writel(hba, 0, REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); | |
| } | |
| /** | |
| * ufshcd_enable_run_stop_reg - Enable run-stop registers, | |
| * When run-stop registers are set to 1, it indicates the | |
| * host controller that it can process the requests | |
| * @hba: per adapter instance | |
| */ | |
| static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) | |
| { | |
| ufshcd_writel(hba, UTP_TASK_REQ_LIST_RUN_STOP_BIT, | |
| REG_UTP_TASK_REQ_LIST_RUN_STOP); | |
| ufshcd_writel(hba, UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT, | |
| REG_UTP_TRANSFER_REQ_LIST_RUN_STOP); | |
| } | |
| /** | |
| * ufshcd_hba_start - Start controller initialization sequence | |
| * @hba: per adapter instance | |
| */ | |
| static inline void ufshcd_hba_start(struct ufs_hba *hba) | |
| { | |
| u32 val = CONTROLLER_ENABLE; | |
| if (ufshcd_crypto_enable(hba)) | |
| val |= CRYPTO_GENERAL_ENABLE; | |
| ufshcd_writel(hba, val, REG_CONTROLLER_ENABLE); | |
| } | |
| /** | |
| * ufshcd_is_hba_active - Get controller state | |
| * @hba: per adapter instance | |
| * | |
| * Return: true if and only if the controller is active. | |
| */ | |
| bool ufshcd_is_hba_active(struct ufs_hba *hba) | |
| { | |
| return ufshcd_readl(hba, REG_CONTROLLER_ENABLE) & CONTROLLER_ENABLE; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_is_hba_active); | |
| /** | |
| * ufshcd_pm_qos_init - initialize PM QoS request | |
| * @hba: per adapter instance | |
| */ | |
| void ufshcd_pm_qos_init(struct ufs_hba *hba) | |
| { | |
| guard(mutex)(&hba->pm_qos_mutex); | |
| if (hba->pm_qos_enabled) | |
| return; | |
| cpu_latency_qos_add_request(&hba->pm_qos_req, PM_QOS_DEFAULT_VALUE); | |
| if (cpu_latency_qos_request_active(&hba->pm_qos_req)) | |
| hba->pm_qos_enabled = true; | |
| } | |
| /** | |
| * ufshcd_pm_qos_exit - remove request from PM QoS | |
| * @hba: per adapter instance | |
| */ | |
| void ufshcd_pm_qos_exit(struct ufs_hba *hba) | |
| { | |
| guard(mutex)(&hba->pm_qos_mutex); | |
| if (!hba->pm_qos_enabled) | |
| return; | |
| cpu_latency_qos_remove_request(&hba->pm_qos_req); | |
| hba->pm_qos_enabled = false; | |
| } | |
| /** | |
| * ufshcd_pm_qos_update - update PM QoS request | |
| * @hba: per adapter instance | |
| * @on: If True, vote for perf PM QoS mode otherwise power save mode | |
| */ | |
| void ufshcd_pm_qos_update(struct ufs_hba *hba, bool on) | |
| { | |
| guard(mutex)(&hba->pm_qos_mutex); | |
| if (!hba->pm_qos_enabled) | |
| return; | |
| cpu_latency_qos_update_request(&hba->pm_qos_req, on ? 0 : PM_QOS_DEFAULT_VALUE); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_pm_qos_update); | |
| /** | |
| * ufshcd_set_clk_freq - set UFS controller clock frequencies | |
| * @hba: per adapter instance | |
| * @scale_up: If True, set max possible frequency othewise set low frequency | |
| * | |
| * Return: 0 if successful; < 0 upon failure. | |
| */ | |
| static int ufshcd_set_clk_freq(struct ufs_hba *hba, bool scale_up) | |
| { | |
| int ret = 0; | |
| struct ufs_clk_info *clki; | |
| struct list_head *head = &hba->clk_list_head; | |
| if (list_empty(head)) | |
| goto out; | |
| list_for_each_entry(clki, head, list) { | |
| if (!IS_ERR_OR_NULL(clki->clk)) { | |
| if (scale_up && clki->max_freq) { | |
| if (clki->curr_freq == clki->max_freq) | |
| continue; | |
| ret = clk_set_rate(clki->clk, clki->max_freq); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n", | |
| __func__, clki->name, | |
| clki->max_freq, ret); | |
| break; | |
| } | |
| trace_ufshcd_clk_scaling(hba, | |
| "scaled up", clki->name, | |
| clki->curr_freq, | |
| clki->max_freq); | |
| clki->curr_freq = clki->max_freq; | |
| } else if (!scale_up && clki->min_freq) { | |
| if (clki->curr_freq == clki->min_freq) | |
| continue; | |
| ret = clk_set_rate(clki->clk, clki->min_freq); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n", | |
| __func__, clki->name, | |
| clki->min_freq, ret); | |
| break; | |
| } | |
| trace_ufshcd_clk_scaling(hba, | |
| "scaled down", clki->name, | |
| clki->curr_freq, | |
| clki->min_freq); | |
| clki->curr_freq = clki->min_freq; | |
| } | |
| } | |
| dev_dbg(hba->dev, "%s: clk: %s, rate: %lu\n", __func__, | |
| clki->name, clk_get_rate(clki->clk)); | |
| } | |
| out: | |
| return ret; | |
| } | |
| int ufshcd_opp_config_clks(struct device *dev, struct opp_table *opp_table, | |
| struct dev_pm_opp *opp, void *data, | |
| bool scaling_down) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| struct list_head *head = &hba->clk_list_head; | |
| struct ufs_clk_info *clki; | |
| unsigned long freq; | |
| u8 idx = 0; | |
| int ret; | |
| list_for_each_entry(clki, head, list) { | |
| if (!IS_ERR_OR_NULL(clki->clk)) { | |
| freq = dev_pm_opp_get_freq_indexed(opp, idx++); | |
| /* Do not set rate for clocks having frequency as 0 */ | |
| if (!freq) | |
| continue; | |
| ret = clk_set_rate(clki->clk, freq); | |
| if (ret) { | |
| dev_err(dev, "%s: %s clk set rate(%ldHz) failed, %d\n", | |
| __func__, clki->name, freq, ret); | |
| return ret; | |
| } | |
| trace_ufshcd_clk_scaling(hba, | |
| (scaling_down ? "scaled down" : "scaled up"), | |
| clki->name, hba->clk_scaling.target_freq, freq); | |
| } | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_opp_config_clks); | |
| static int ufshcd_opp_set_rate(struct ufs_hba *hba, unsigned long freq) | |
| { | |
| struct dev_pm_opp *opp; | |
| int ret; | |
| opp = dev_pm_opp_find_freq_floor_indexed(hba->dev, | |
| &freq, 0); | |
| if (IS_ERR(opp)) | |
| return PTR_ERR(opp); | |
| ret = dev_pm_opp_set_opp(hba->dev, opp); | |
| dev_pm_opp_put(opp); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_scale_clks - scale up or scale down UFS controller clocks | |
| * @hba: per adapter instance | |
| * @freq: frequency to scale | |
| * @scale_up: True if scaling up and false if scaling down | |
| * | |
| * Return: 0 if successful; < 0 upon failure. | |
| */ | |
| int ufshcd_scale_clks(struct ufs_hba *hba, unsigned long freq, bool scale_up) | |
| { | |
| int ret = 0; | |
| ktime_t start = ktime_get(); | |
| ret = ufshcd_vops_clk_scale_notify(hba, scale_up, freq, PRE_CHANGE); | |
| if (ret) | |
| goto out; | |
| if (hba->use_pm_opp) | |
| ret = ufshcd_opp_set_rate(hba, freq); | |
| else | |
| ret = ufshcd_set_clk_freq(hba, scale_up); | |
| if (ret) | |
| goto out; | |
| ret = ufshcd_vops_clk_scale_notify(hba, scale_up, freq, POST_CHANGE); | |
| if (ret) { | |
| if (hba->use_pm_opp) | |
| ufshcd_opp_set_rate(hba, | |
| hba->devfreq->previous_freq); | |
| else | |
| ufshcd_set_clk_freq(hba, !scale_up); | |
| goto out; | |
| } | |
| ufshcd_pm_qos_update(hba, scale_up); | |
| out: | |
| trace_ufshcd_profile_clk_scaling(hba, | |
| (scale_up ? "up" : "down"), | |
| ktime_to_us(ktime_sub(ktime_get(), start)), ret); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_is_devfreq_scaling_required - check if scaling is required or not | |
| * @hba: per adapter instance | |
| * @freq: frequency to scale | |
| * @scale_up: True if scaling up and false if scaling down | |
| * | |
| * Return: true if scaling is required, false otherwise. | |
| */ | |
| static bool ufshcd_is_devfreq_scaling_required(struct ufs_hba *hba, | |
| unsigned long freq, bool scale_up) | |
| { | |
| struct ufs_clk_info *clki; | |
| struct list_head *head = &hba->clk_list_head; | |
| if (list_empty(head)) | |
| return false; | |
| if (hba->use_pm_opp) | |
| return freq != hba->clk_scaling.target_freq; | |
| list_for_each_entry(clki, head, list) { | |
| if (!IS_ERR_OR_NULL(clki->clk)) { | |
| if (scale_up && clki->max_freq) { | |
| if (clki->curr_freq == clki->max_freq) | |
| continue; | |
| return true; | |
| } else if (!scale_up && clki->min_freq) { | |
| if (clki->curr_freq == clki->min_freq) | |
| continue; | |
| return true; | |
| } | |
| } | |
| } | |
| return false; | |
| } | |
| /* | |
| * Determine the number of pending commands by counting the bits in the SCSI | |
| * device budget maps. This approach has been selected because a bit is set in | |
| * the budget map before scsi_host_queue_ready() checks the host_self_blocked | |
| * flag. The host_self_blocked flag can be modified by calling | |
| * scsi_block_requests() or scsi_unblock_requests(). | |
| */ | |
| static u32 ufshcd_pending_cmds(struct ufs_hba *hba) | |
| { | |
| struct scsi_device *sdev; | |
| unsigned long flags; | |
| u32 pending = 0; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| __shost_for_each_device(sdev, hba->host) | |
| pending += scsi_device_busy(sdev); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| return pending; | |
| } | |
| /* | |
| * Wait until all pending SCSI commands and TMFs have finished or the timeout | |
| * has expired. | |
| * | |
| * Return: 0 upon success; -EBUSY upon timeout. | |
| */ | |
| static int ufshcd_wait_for_pending_cmds(struct ufs_hba *hba, | |
| u64 wait_timeout_us) | |
| { | |
| int ret = 0; | |
| u32 tm_doorbell; | |
| u32 tr_pending; | |
| bool timeout = false, do_last_check = false; | |
| ktime_t start; | |
| ufshcd_hold(hba); | |
| /* | |
| * Wait for all the outstanding tasks/transfer requests. | |
| * Verify by checking the doorbell registers are clear. | |
| */ | |
| start = ktime_get(); | |
| do { | |
| if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) { | |
| ret = -EBUSY; | |
| goto out; | |
| } | |
| tm_doorbell = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL); | |
| tr_pending = ufshcd_pending_cmds(hba); | |
| if (!tm_doorbell && !tr_pending) { | |
| timeout = false; | |
| break; | |
| } else if (do_last_check) { | |
| break; | |
| } | |
| __set_current_state(TASK_UNINTERRUPTIBLE); | |
| io_schedule_timeout(msecs_to_jiffies(20)); | |
| if (ktime_to_us(ktime_sub(ktime_get(), start)) > | |
| wait_timeout_us) { | |
| timeout = true; | |
| /* | |
| * We might have scheduled out for long time so make | |
| * sure to check if doorbells are cleared by this time | |
| * or not. | |
| */ | |
| do_last_check = true; | |
| } | |
| } while (tm_doorbell || tr_pending); | |
| if (timeout) { | |
| dev_err(hba->dev, | |
| "%s: timedout waiting for doorbell to clear (tm=0x%x, tr=0x%x)\n", | |
| __func__, tm_doorbell, tr_pending); | |
| ret = -EBUSY; | |
| } | |
| out: | |
| ufshcd_release(hba); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_pause_command_processing - Pause command processing | |
| * @hba: per-adapter instance | |
| * @timeout_us: timeout in microseconds to wait for pending commands to finish | |
| * | |
| * This function stops new command submissions and waits for existing commands | |
| * to complete. | |
| * | |
| * Return: 0 on success, %-EBUSY if commands did not finish within @timeout_us. | |
| * On failure, all acquired locks are released and the tagset is unquiesced. | |
| */ | |
| int ufshcd_pause_command_processing(struct ufs_hba *hba, u64 timeout_us) | |
| __cond_acquires(0, &hba->host->scan_mutex) | |
| __cond_acquires(0, &hba->clk_scaling_lock) | |
| { | |
| int ret = 0; | |
| mutex_lock(&hba->host->scan_mutex); | |
| blk_mq_quiesce_tagset(&hba->host->tag_set); | |
| down_write(&hba->clk_scaling_lock); | |
| if (ufshcd_wait_for_pending_cmds(hba, timeout_us)) { | |
| ret = -EBUSY; | |
| up_write(&hba->clk_scaling_lock); | |
| blk_mq_unquiesce_tagset(&hba->host->tag_set); | |
| mutex_unlock(&hba->host->scan_mutex); | |
| } | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_resume_command_processing - Resume command processing | |
| * @hba: per-adapter instance | |
| * | |
| * This function resumes command submissions. | |
| */ | |
| void ufshcd_resume_command_processing(struct ufs_hba *hba) | |
| __releases(&hba->clk_scaling_lock) | |
| __releases(&hba->host->scan_mutex) | |
| { | |
| up_write(&hba->clk_scaling_lock); | |
| blk_mq_unquiesce_tagset(&hba->host->tag_set); | |
| mutex_unlock(&hba->host->scan_mutex); | |
| } | |
| /** | |
| * ufshcd_scale_gear - scale up/down UFS gear | |
| * @hba: per adapter instance | |
| * @target_gear: target gear to scale to | |
| * @scale_up: True for scaling up gear and false for scaling down | |
| * | |
| * Return: 0 for success; -EBUSY if scaling can't happen at this time; | |
| * non-zero for any other errors. | |
| */ | |
| static int ufshcd_scale_gear(struct ufs_hba *hba, u32 target_gear, bool scale_up) | |
| { | |
| int ret = 0; | |
| struct ufs_pa_layer_attr new_pwr_info; | |
| if (target_gear) { | |
| new_pwr_info = hba->pwr_info; | |
| new_pwr_info.gear_tx = target_gear; | |
| new_pwr_info.gear_rx = target_gear; | |
| goto config_pwr_mode; | |
| } | |
| /* Legacy gear scaling, in case vops_freq_to_gear_speed() is not implemented */ | |
| if (scale_up) { | |
| memcpy(&new_pwr_info, &hba->clk_scaling.saved_pwr_info, | |
| sizeof(struct ufs_pa_layer_attr)); | |
| } else { | |
| memcpy(&new_pwr_info, &hba->pwr_info, | |
| sizeof(struct ufs_pa_layer_attr)); | |
| if (hba->pwr_info.gear_tx > hba->clk_scaling.min_gear || | |
| hba->pwr_info.gear_rx > hba->clk_scaling.min_gear) { | |
| /* save the current power mode */ | |
| memcpy(&hba->clk_scaling.saved_pwr_info, | |
| &hba->pwr_info, | |
| sizeof(struct ufs_pa_layer_attr)); | |
| /* scale down gear */ | |
| new_pwr_info.gear_tx = hba->clk_scaling.min_gear; | |
| new_pwr_info.gear_rx = hba->clk_scaling.min_gear; | |
| } | |
| } | |
| config_pwr_mode: | |
| /* check if the power mode needs to be changed or not? */ | |
| ret = ufshcd_config_pwr_mode(hba, &new_pwr_info, | |
| UFSHCD_PMC_POLICY_DONT_FORCE); | |
| if (ret) | |
| dev_err(hba->dev, "%s: failed err %d, old gear: (tx %d rx %d), new gear: (tx %d rx %d)", | |
| __func__, ret, | |
| hba->pwr_info.gear_tx, hba->pwr_info.gear_rx, | |
| new_pwr_info.gear_tx, new_pwr_info.gear_rx); | |
| return ret; | |
| } | |
| /* | |
| * Wait until all pending SCSI commands and TMFs have finished or the timeout | |
| * has expired. | |
| * | |
| * Return: 0 upon success; -EBUSY upon timeout. | |
| */ | |
| static int ufshcd_clock_scaling_prepare(struct ufs_hba *hba, u64 timeout_us) | |
| __cond_acquires(0, &hba->host->scan_mutex) | |
| __cond_acquires(0, &hba->wb_mutex) | |
| __cond_acquires(0, &hba->clk_scaling_lock) | |
| { | |
| int ret = 0; | |
| /* | |
| * make sure that there are no outstanding requests when | |
| * clock scaling is in progress | |
| */ | |
| mutex_lock(&hba->host->scan_mutex); | |
| blk_mq_quiesce_tagset(&hba->host->tag_set); | |
| mutex_lock(&hba->wb_mutex); | |
| down_write(&hba->clk_scaling_lock); | |
| if (!hba->clk_scaling.is_allowed || | |
| ufshcd_wait_for_pending_cmds(hba, timeout_us)) { | |
| ret = -EBUSY; | |
| up_write(&hba->clk_scaling_lock); | |
| mutex_unlock(&hba->wb_mutex); | |
| blk_mq_unquiesce_tagset(&hba->host->tag_set); | |
| mutex_unlock(&hba->host->scan_mutex); | |
| goto out; | |
| } | |
| /* let's not get into low power until clock scaling is completed */ | |
| ufshcd_hold(hba); | |
| out: | |
| return ret; | |
| } | |
| static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba, int err) | |
| __releases(&hba->clk_scaling_lock) | |
| __releases(&hba->wb_mutex) | |
| __releases(&hba->host->scan_mutex) | |
| { | |
| up_write(&hba->clk_scaling_lock); | |
| mutex_unlock(&hba->wb_mutex); | |
| blk_mq_unquiesce_tagset(&hba->host->tag_set); | |
| mutex_unlock(&hba->host->scan_mutex); | |
| /* Enable Write Booster if current gear requires it else disable it */ | |
| if (ufshcd_enable_wb_if_scaling_up(hba) && !err) | |
| ufshcd_wb_toggle(hba, hba->pwr_info.gear_rx >= hba->clk_scaling.wb_gear); | |
| ufshcd_release(hba); | |
| } | |
| /** | |
| * ufshcd_devfreq_scale - scale up/down UFS clocks and gear | |
| * @hba: per adapter instance | |
| * @freq: frequency to scale | |
| * @scale_up: True for scaling up and false for scalin down | |
| * | |
| * Return: 0 for success; -EBUSY if scaling can't happen at this time; non-zero | |
| * for any other errors. | |
| */ | |
| static int ufshcd_devfreq_scale(struct ufs_hba *hba, unsigned long freq, | |
| bool scale_up) | |
| { | |
| u32 old_gear = hba->pwr_info.gear_rx; | |
| u32 new_gear = 0; | |
| int ret = 0; | |
| new_gear = ufshcd_vops_freq_to_gear_speed(hba, freq); | |
| ret = ufshcd_clock_scaling_prepare(hba, 1 * USEC_PER_SEC); | |
| if (ret) | |
| return ret; | |
| /* scale down the gear before scaling down clocks */ | |
| if (!scale_up) { | |
| ret = ufshcd_scale_gear(hba, new_gear, false); | |
| if (ret) | |
| goto out_unprepare; | |
| } | |
| ret = ufshcd_scale_clks(hba, freq, scale_up); | |
| if (ret) { | |
| if (!scale_up) | |
| ufshcd_scale_gear(hba, old_gear, true); | |
| goto out_unprepare; | |
| } | |
| /* scale up the gear after scaling up clocks */ | |
| if (scale_up) { | |
| ret = ufshcd_scale_gear(hba, new_gear, true); | |
| if (ret) { | |
| ufshcd_scale_clks(hba, hba->devfreq->previous_freq, | |
| false); | |
| goto out_unprepare; | |
| } | |
| } | |
| out_unprepare: | |
| ufshcd_clock_scaling_unprepare(hba, ret); | |
| return ret; | |
| } | |
| static void ufshcd_clk_scaling_suspend_work(struct work_struct *work) | |
| { | |
| struct ufs_hba *hba = container_of(work, struct ufs_hba, | |
| clk_scaling.suspend_work); | |
| scoped_guard(spinlock_irqsave, &hba->clk_scaling.lock) | |
| { | |
| if (hba->clk_scaling.active_reqs || | |
| hba->clk_scaling.is_suspended) | |
| return; | |
| hba->clk_scaling.is_suspended = true; | |
| hba->clk_scaling.window_start_t = 0; | |
| } | |
| devfreq_suspend_device(hba->devfreq); | |
| } | |
| static void ufshcd_clk_scaling_resume_work(struct work_struct *work) | |
| { | |
| struct ufs_hba *hba = container_of(work, struct ufs_hba, | |
| clk_scaling.resume_work); | |
| scoped_guard(spinlock_irqsave, &hba->clk_scaling.lock) | |
| { | |
| if (!hba->clk_scaling.is_suspended) | |
| return; | |
| hba->clk_scaling.is_suspended = false; | |
| } | |
| devfreq_resume_device(hba->devfreq); | |
| } | |
| static int ufshcd_devfreq_target(struct device *dev, | |
| unsigned long *freq, u32 flags) | |
| { | |
| int ret = 0; | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| ktime_t start; | |
| bool scale_up = false, sched_clk_scaling_suspend_work = false; | |
| struct list_head *clk_list = &hba->clk_list_head; | |
| struct ufs_clk_info *clki; | |
| if (!ufshcd_is_clkscaling_supported(hba)) | |
| return -EINVAL; | |
| if (hba->use_pm_opp) { | |
| struct dev_pm_opp *opp; | |
| /* Get the recommended frequency from OPP framework */ | |
| opp = devfreq_recommended_opp(dev, freq, flags); | |
| if (IS_ERR(opp)) | |
| return PTR_ERR(opp); | |
| dev_pm_opp_put(opp); | |
| } else { | |
| /* Override with the closest supported frequency */ | |
| clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, | |
| list); | |
| *freq = (unsigned long) clk_round_rate(clki->clk, *freq); | |
| } | |
| scoped_guard(spinlock_irqsave, &hba->clk_scaling.lock) | |
| { | |
| if (ufshcd_eh_in_progress(hba)) | |
| return 0; | |
| /* Skip scaling clock when clock scaling is suspended */ | |
| if (hba->clk_scaling.is_suspended) { | |
| dev_warn(hba->dev, "clock scaling is suspended, skip"); | |
| return 0; | |
| } | |
| if (!hba->clk_scaling.active_reqs) | |
| sched_clk_scaling_suspend_work = true; | |
| if (list_empty(clk_list)) | |
| goto out; | |
| /* Decide based on the target or rounded-off frequency and update */ | |
| if (hba->use_pm_opp) | |
| scale_up = *freq > hba->clk_scaling.target_freq; | |
| else | |
| scale_up = *freq == clki->max_freq; | |
| if (!hba->use_pm_opp && !scale_up) | |
| *freq = clki->min_freq; | |
| /* Update the frequency */ | |
| if (!ufshcd_is_devfreq_scaling_required(hba, *freq, scale_up)) { | |
| ret = 0; | |
| goto out; /* no state change required */ | |
| } | |
| } | |
| start = ktime_get(); | |
| ret = ufshcd_devfreq_scale(hba, *freq, scale_up); | |
| if (!ret) | |
| hba->clk_scaling.target_freq = *freq; | |
| trace_ufshcd_profile_clk_scaling(hba, | |
| (scale_up ? "up" : "down"), | |
| ktime_to_us(ktime_sub(ktime_get(), start)), ret); | |
| out: | |
| if (sched_clk_scaling_suspend_work && | |
| (!scale_up || hba->clk_scaling.suspend_on_no_request)) | |
| queue_work(hba->clk_scaling.workq, | |
| &hba->clk_scaling.suspend_work); | |
| return ret; | |
| } | |
| static int ufshcd_devfreq_get_dev_status(struct device *dev, | |
| struct devfreq_dev_status *stat) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| struct ufs_clk_scaling *scaling = &hba->clk_scaling; | |
| ktime_t curr_t; | |
| if (!ufshcd_is_clkscaling_supported(hba)) | |
| return -EINVAL; | |
| memset(stat, 0, sizeof(*stat)); | |
| guard(spinlock_irqsave)(&hba->clk_scaling.lock); | |
| curr_t = ktime_get(); | |
| if (!scaling->window_start_t) | |
| goto start_window; | |
| /* | |
| * If current frequency is 0, then the ondemand governor considers | |
| * there's no initial frequency set. And it always requests to set | |
| * to max. frequency. | |
| */ | |
| if (hba->use_pm_opp) { | |
| stat->current_frequency = hba->clk_scaling.target_freq; | |
| } else { | |
| struct list_head *clk_list = &hba->clk_list_head; | |
| struct ufs_clk_info *clki; | |
| clki = list_first_entry(clk_list, struct ufs_clk_info, list); | |
| stat->current_frequency = clki->curr_freq; | |
| } | |
| if (scaling->is_busy_started) | |
| scaling->tot_busy_t += ktime_us_delta(curr_t, | |
| scaling->busy_start_t); | |
| stat->total_time = ktime_us_delta(curr_t, scaling->window_start_t); | |
| stat->busy_time = scaling->tot_busy_t; | |
| start_window: | |
| scaling->window_start_t = curr_t; | |
| scaling->tot_busy_t = 0; | |
| if (scaling->active_reqs) { | |
| scaling->busy_start_t = curr_t; | |
| scaling->is_busy_started = true; | |
| } else { | |
| scaling->busy_start_t = 0; | |
| scaling->is_busy_started = false; | |
| } | |
| return 0; | |
| } | |
| static int ufshcd_devfreq_init(struct ufs_hba *hba) | |
| { | |
| struct list_head *clk_list = &hba->clk_list_head; | |
| struct ufs_clk_info *clki; | |
| struct devfreq *devfreq; | |
| int ret; | |
| /* Skip devfreq if we don't have any clocks in the list */ | |
| if (list_empty(clk_list)) | |
| return 0; | |
| if (!hba->use_pm_opp) { | |
| clki = list_first_entry(clk_list, struct ufs_clk_info, list); | |
| dev_pm_opp_add(hba->dev, clki->min_freq, 0); | |
| dev_pm_opp_add(hba->dev, clki->max_freq, 0); | |
| } | |
| ufshcd_vops_config_scaling_param(hba, &hba->vps->devfreq_profile, | |
| &hba->vps->ondemand_data); | |
| devfreq = devfreq_add_device(hba->dev, | |
| &hba->vps->devfreq_profile, | |
| DEVFREQ_GOV_SIMPLE_ONDEMAND, | |
| &hba->vps->ondemand_data); | |
| if (IS_ERR(devfreq)) { | |
| ret = PTR_ERR(devfreq); | |
| dev_err(hba->dev, "Unable to register with devfreq %d\n", ret); | |
| if (!hba->use_pm_opp) { | |
| dev_pm_opp_remove(hba->dev, clki->min_freq); | |
| dev_pm_opp_remove(hba->dev, clki->max_freq); | |
| } | |
| return ret; | |
| } | |
| hba->devfreq = devfreq; | |
| return 0; | |
| } | |
| static void ufshcd_devfreq_remove(struct ufs_hba *hba) | |
| { | |
| struct list_head *clk_list = &hba->clk_list_head; | |
| if (!hba->devfreq) | |
| return; | |
| devfreq_remove_device(hba->devfreq); | |
| hba->devfreq = NULL; | |
| if (!hba->use_pm_opp) { | |
| struct ufs_clk_info *clki; | |
| clki = list_first_entry(clk_list, struct ufs_clk_info, list); | |
| dev_pm_opp_remove(hba->dev, clki->min_freq); | |
| dev_pm_opp_remove(hba->dev, clki->max_freq); | |
| } | |
| } | |
| static void ufshcd_suspend_clkscaling(struct ufs_hba *hba) | |
| { | |
| bool suspend = false; | |
| cancel_work_sync(&hba->clk_scaling.suspend_work); | |
| cancel_work_sync(&hba->clk_scaling.resume_work); | |
| scoped_guard(spinlock_irqsave, &hba->clk_scaling.lock) | |
| { | |
| if (!hba->clk_scaling.is_suspended) { | |
| suspend = true; | |
| hba->clk_scaling.is_suspended = true; | |
| hba->clk_scaling.window_start_t = 0; | |
| } | |
| } | |
| if (suspend) | |
| devfreq_suspend_device(hba->devfreq); | |
| } | |
| static void ufshcd_resume_clkscaling(struct ufs_hba *hba) | |
| { | |
| bool resume = false; | |
| scoped_guard(spinlock_irqsave, &hba->clk_scaling.lock) | |
| { | |
| if (hba->clk_scaling.is_suspended) { | |
| resume = true; | |
| hba->clk_scaling.is_suspended = false; | |
| } | |
| } | |
| if (resume) | |
| devfreq_resume_device(hba->devfreq); | |
| } | |
| static ssize_t ufshcd_clkscale_enable_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| return sysfs_emit(buf, "%d\n", hba->clk_scaling.is_enabled); | |
| } | |
| static ssize_t ufshcd_clkscale_enable_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| struct ufs_clk_info *clki; | |
| unsigned long freq; | |
| u32 value; | |
| int err = 0; | |
| if (kstrtou32(buf, 0, &value)) | |
| return -EINVAL; | |
| down(&hba->host_sem); | |
| if (!ufshcd_is_user_access_allowed(hba)) { | |
| err = -EBUSY; | |
| goto out; | |
| } | |
| value = !!value; | |
| if (value == hba->clk_scaling.is_enabled) | |
| goto out; | |
| ufshcd_rpm_get_sync(hba); | |
| ufshcd_hold(hba); | |
| hba->clk_scaling.is_enabled = value; | |
| if (value) { | |
| ufshcd_resume_clkscaling(hba); | |
| goto out_rel; | |
| } | |
| clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list); | |
| freq = clki->max_freq; | |
| ufshcd_suspend_clkscaling(hba); | |
| if (!ufshcd_is_devfreq_scaling_required(hba, freq, true)) | |
| goto out_rel; | |
| err = ufshcd_devfreq_scale(hba, freq, true); | |
| if (err) | |
| dev_err(hba->dev, "%s: failed to scale clocks up %d\n", | |
| __func__, err); | |
| else | |
| hba->clk_scaling.target_freq = freq; | |
| out_rel: | |
| ufshcd_release(hba); | |
| ufshcd_rpm_put_sync(hba); | |
| out: | |
| up(&hba->host_sem); | |
| return err ? err : count; | |
| } | |
| static void ufshcd_init_clk_scaling_sysfs(struct ufs_hba *hba) | |
| { | |
| hba->clk_scaling.enable_attr.show = ufshcd_clkscale_enable_show; | |
| hba->clk_scaling.enable_attr.store = ufshcd_clkscale_enable_store; | |
| sysfs_attr_init(&hba->clk_scaling.enable_attr.attr); | |
| hba->clk_scaling.enable_attr.attr.name = "clkscale_enable"; | |
| hba->clk_scaling.enable_attr.attr.mode = 0644; | |
| if (device_create_file(hba->dev, &hba->clk_scaling.enable_attr)) | |
| dev_err(hba->dev, "Failed to create sysfs for clkscale_enable\n"); | |
| } | |
| static void ufshcd_remove_clk_scaling_sysfs(struct ufs_hba *hba) | |
| { | |
| if (hba->clk_scaling.enable_attr.attr.name) | |
| device_remove_file(hba->dev, &hba->clk_scaling.enable_attr); | |
| } | |
| static void ufshcd_init_clk_scaling(struct ufs_hba *hba) | |
| { | |
| if (!ufshcd_is_clkscaling_supported(hba)) | |
| return; | |
| if (!hba->clk_scaling.min_gear) | |
| hba->clk_scaling.min_gear = UFS_HS_G1; | |
| if (!hba->clk_scaling.wb_gear) | |
| /* Use intermediate gear speed HS_G3 as the default wb_gear */ | |
| hba->clk_scaling.wb_gear = UFS_HS_G3; | |
| INIT_WORK(&hba->clk_scaling.suspend_work, | |
| ufshcd_clk_scaling_suspend_work); | |
| INIT_WORK(&hba->clk_scaling.resume_work, | |
| ufshcd_clk_scaling_resume_work); | |
| spin_lock_init(&hba->clk_scaling.lock); | |
| hba->clk_scaling.workq = alloc_ordered_workqueue( | |
| "ufs_clkscaling_%d", WQ_MEM_RECLAIM, hba->host->host_no); | |
| hba->clk_scaling.is_initialized = true; | |
| } | |
| static void ufshcd_exit_clk_scaling(struct ufs_hba *hba) | |
| { | |
| if (!hba->clk_scaling.is_initialized) | |
| return; | |
| ufshcd_remove_clk_scaling_sysfs(hba); | |
| destroy_workqueue(hba->clk_scaling.workq); | |
| ufshcd_devfreq_remove(hba); | |
| hba->clk_scaling.is_initialized = false; | |
| } | |
| static void ufshcd_ungate_work(struct work_struct *work) | |
| { | |
| int ret; | |
| struct ufs_hba *hba = container_of(work, struct ufs_hba, | |
| clk_gating.ungate_work); | |
| cancel_delayed_work_sync(&hba->clk_gating.gate_work); | |
| scoped_guard(spinlock_irqsave, &hba->clk_gating.lock) { | |
| if (hba->clk_gating.state == CLKS_ON) | |
| return; | |
| } | |
| ufshcd_hba_vreg_set_hpm(hba); | |
| ufshcd_setup_clocks(hba, true); | |
| ufshcd_enable_irq(hba); | |
| /* Exit from hibern8 */ | |
| if (ufshcd_can_hibern8_during_gating(hba)) { | |
| /* Prevent gating in this path */ | |
| hba->clk_gating.is_suspended = true; | |
| if (ufshcd_is_link_hibern8(hba)) { | |
| ret = ufshcd_uic_hibern8_exit(hba); | |
| if (ret) | |
| dev_err(hba->dev, "%s: hibern8 exit failed %d\n", | |
| __func__, ret); | |
| else | |
| ufshcd_set_link_active(hba); | |
| } | |
| hba->clk_gating.is_suspended = false; | |
| } | |
| } | |
| /** | |
| * ufshcd_hold - Enable clocks that were gated earlier due to ufshcd_release. | |
| * Also, exit from hibern8 mode and set the link as active. | |
| * @hba: per adapter instance | |
| */ | |
| void ufshcd_hold(struct ufs_hba *hba) | |
| { | |
| bool flush_result; | |
| unsigned long flags; | |
| if (!ufshcd_is_clkgating_allowed(hba) || | |
| !hba->clk_gating.is_initialized) | |
| return; | |
| spin_lock_irqsave(&hba->clk_gating.lock, flags); | |
| hba->clk_gating.active_reqs++; | |
| start: | |
| switch (hba->clk_gating.state) { | |
| case CLKS_ON: | |
| /* | |
| * Wait for the ungate work to complete if in progress. | |
| * Though the clocks may be in ON state, the link could | |
| * still be in hibner8 state if hibern8 is allowed | |
| * during clock gating. | |
| * Make sure we exit hibern8 state also in addition to | |
| * clocks being ON. | |
| */ | |
| if (ufshcd_can_hibern8_during_gating(hba) && | |
| ufshcd_is_link_hibern8(hba)) { | |
| spin_unlock_irqrestore(&hba->clk_gating.lock, flags); | |
| flush_result = flush_work(&hba->clk_gating.ungate_work); | |
| if (hba->clk_gating.is_suspended && !flush_result) | |
| return; | |
| spin_lock_irqsave(&hba->clk_gating.lock, flags); | |
| goto start; | |
| } | |
| break; | |
| case REQ_CLKS_OFF: | |
| if (cancel_delayed_work(&hba->clk_gating.gate_work)) { | |
| hba->clk_gating.state = CLKS_ON; | |
| trace_ufshcd_clk_gating(hba, | |
| hba->clk_gating.state); | |
| break; | |
| } | |
| /* | |
| * If we are here, it means gating work is either done or | |
| * currently running. Hence, fall through to cancel gating | |
| * work and to enable clocks. | |
| */ | |
| fallthrough; | |
| case CLKS_OFF: | |
| hba->clk_gating.state = REQ_CLKS_ON; | |
| trace_ufshcd_clk_gating(hba, | |
| hba->clk_gating.state); | |
| queue_work(hba->clk_gating.clk_gating_workq, | |
| &hba->clk_gating.ungate_work); | |
| /* | |
| * fall through to check if we should wait for this | |
| * work to be done or not. | |
| */ | |
| fallthrough; | |
| case REQ_CLKS_ON: | |
| spin_unlock_irqrestore(&hba->clk_gating.lock, flags); | |
| flush_work(&hba->clk_gating.ungate_work); | |
| /* Make sure state is CLKS_ON before returning */ | |
| spin_lock_irqsave(&hba->clk_gating.lock, flags); | |
| goto start; | |
| default: | |
| dev_err(hba->dev, "%s: clk gating is in invalid state %d\n", | |
| __func__, hba->clk_gating.state); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&hba->clk_gating.lock, flags); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_hold); | |
| static void ufshcd_gate_work(struct work_struct *work) | |
| { | |
| struct ufs_hba *hba = container_of(work, struct ufs_hba, | |
| clk_gating.gate_work.work); | |
| int ret; | |
| scoped_guard(spinlock_irqsave, &hba->clk_gating.lock) { | |
| /* | |
| * In case you are here to cancel this work the gating state | |
| * would be marked as REQ_CLKS_ON. In this case save time by | |
| * skipping the gating work and exit after changing the clock | |
| * state to CLKS_ON. | |
| */ | |
| if (hba->clk_gating.is_suspended || | |
| hba->clk_gating.state != REQ_CLKS_OFF) { | |
| hba->clk_gating.state = CLKS_ON; | |
| trace_ufshcd_clk_gating(hba, | |
| hba->clk_gating.state); | |
| return; | |
| } | |
| if (hba->clk_gating.active_reqs) | |
| return; | |
| } | |
| scoped_guard(spinlock_irqsave, hba->host->host_lock) { | |
| if (ufshcd_is_ufs_dev_busy(hba) || | |
| hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) | |
| return; | |
| } | |
| /* put the link into hibern8 mode before turning off clocks */ | |
| if (ufshcd_can_hibern8_during_gating(hba)) { | |
| ret = ufshcd_uic_hibern8_enter(hba); | |
| if (ret) { | |
| hba->clk_gating.state = CLKS_ON; | |
| dev_err(hba->dev, "%s: hibern8 enter failed %d\n", | |
| __func__, ret); | |
| trace_ufshcd_clk_gating(hba, | |
| hba->clk_gating.state); | |
| return; | |
| } | |
| ufshcd_set_link_hibern8(hba); | |
| } | |
| ufshcd_disable_irq(hba); | |
| ufshcd_setup_clocks(hba, false); | |
| /* Put the host controller in low power mode if possible */ | |
| ufshcd_hba_vreg_set_lpm(hba); | |
| /* | |
| * In case you are here to cancel this work the gating state | |
| * would be marked as REQ_CLKS_ON. In this case keep the state | |
| * as REQ_CLKS_ON which would anyway imply that clocks are off | |
| * and a request to turn them on is pending. By doing this way, | |
| * we keep the state machine in tact and this would ultimately | |
| * prevent from doing cancel work multiple times when there are | |
| * new requests arriving before the current cancel work is done. | |
| */ | |
| guard(spinlock_irqsave)(&hba->clk_gating.lock); | |
| if (hba->clk_gating.state == REQ_CLKS_OFF) { | |
| hba->clk_gating.state = CLKS_OFF; | |
| trace_ufshcd_clk_gating(hba, | |
| hba->clk_gating.state); | |
| } | |
| } | |
| static void __ufshcd_release(struct ufs_hba *hba) | |
| { | |
| lockdep_assert_held(&hba->clk_gating.lock); | |
| if (!ufshcd_is_clkgating_allowed(hba)) | |
| return; | |
| hba->clk_gating.active_reqs--; | |
| if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended || | |
| !hba->clk_gating.is_initialized || | |
| hba->clk_gating.state == CLKS_OFF) | |
| return; | |
| scoped_guard(spinlock_irqsave, hba->host->host_lock) { | |
| if (ufshcd_has_pending_tasks(hba) || | |
| hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) | |
| return; | |
| } | |
| hba->clk_gating.state = REQ_CLKS_OFF; | |
| trace_ufshcd_clk_gating(hba, hba->clk_gating.state); | |
| queue_delayed_work(hba->clk_gating.clk_gating_workq, | |
| &hba->clk_gating.gate_work, | |
| msecs_to_jiffies(hba->clk_gating.delay_ms)); | |
| } | |
| void ufshcd_release(struct ufs_hba *hba) | |
| { | |
| guard(spinlock_irqsave)(&hba->clk_gating.lock); | |
| __ufshcd_release(hba); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_release); | |
| static ssize_t ufshcd_clkgate_delay_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| return sysfs_emit(buf, "%lu\n", hba->clk_gating.delay_ms); | |
| } | |
| void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| guard(spinlock_irqsave)(&hba->clk_gating.lock); | |
| hba->clk_gating.delay_ms = value; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_clkgate_delay_set); | |
| static ssize_t ufshcd_clkgate_delay_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| unsigned long value; | |
| if (kstrtoul(buf, 0, &value)) | |
| return -EINVAL; | |
| ufshcd_clkgate_delay_set(dev, value); | |
| return count; | |
| } | |
| static ssize_t ufshcd_clkgate_enable_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| return sysfs_emit(buf, "%d\n", hba->clk_gating.is_enabled); | |
| } | |
| static ssize_t ufshcd_clkgate_enable_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| u32 value; | |
| if (kstrtou32(buf, 0, &value)) | |
| return -EINVAL; | |
| value = !!value; | |
| guard(spinlock_irqsave)(&hba->clk_gating.lock); | |
| if (value == hba->clk_gating.is_enabled) | |
| return count; | |
| if (value) | |
| __ufshcd_release(hba); | |
| else | |
| hba->clk_gating.active_reqs++; | |
| hba->clk_gating.is_enabled = value; | |
| return count; | |
| } | |
| static void ufshcd_init_clk_gating_sysfs(struct ufs_hba *hba) | |
| { | |
| hba->clk_gating.delay_attr.show = ufshcd_clkgate_delay_show; | |
| hba->clk_gating.delay_attr.store = ufshcd_clkgate_delay_store; | |
| sysfs_attr_init(&hba->clk_gating.delay_attr.attr); | |
| hba->clk_gating.delay_attr.attr.name = "clkgate_delay_ms"; | |
| hba->clk_gating.delay_attr.attr.mode = 0644; | |
| if (device_create_file(hba->dev, &hba->clk_gating.delay_attr)) | |
| dev_err(hba->dev, "Failed to create sysfs for clkgate_delay\n"); | |
| hba->clk_gating.enable_attr.show = ufshcd_clkgate_enable_show; | |
| hba->clk_gating.enable_attr.store = ufshcd_clkgate_enable_store; | |
| sysfs_attr_init(&hba->clk_gating.enable_attr.attr); | |
| hba->clk_gating.enable_attr.attr.name = "clkgate_enable"; | |
| hba->clk_gating.enable_attr.attr.mode = 0644; | |
| if (device_create_file(hba->dev, &hba->clk_gating.enable_attr)) | |
| dev_err(hba->dev, "Failed to create sysfs for clkgate_enable\n"); | |
| } | |
| static void ufshcd_remove_clk_gating_sysfs(struct ufs_hba *hba) | |
| { | |
| if (hba->clk_gating.delay_attr.attr.name) | |
| device_remove_file(hba->dev, &hba->clk_gating.delay_attr); | |
| if (hba->clk_gating.enable_attr.attr.name) | |
| device_remove_file(hba->dev, &hba->clk_gating.enable_attr); | |
| } | |
| static void ufshcd_init_clk_gating(struct ufs_hba *hba) | |
| { | |
| if (!ufshcd_is_clkgating_allowed(hba)) | |
| return; | |
| hba->clk_gating.state = CLKS_ON; | |
| hba->clk_gating.delay_ms = 150; | |
| INIT_DELAYED_WORK(&hba->clk_gating.gate_work, ufshcd_gate_work); | |
| INIT_WORK(&hba->clk_gating.ungate_work, ufshcd_ungate_work); | |
| hba->clk_gating.clk_gating_workq = alloc_ordered_workqueue( | |
| "ufs_clk_gating_%d", WQ_MEM_RECLAIM | WQ_HIGHPRI, | |
| hba->host->host_no); | |
| ufshcd_init_clk_gating_sysfs(hba); | |
| hba->clk_gating.is_enabled = true; | |
| hba->clk_gating.is_initialized = true; | |
| } | |
| static void ufshcd_exit_clk_gating(struct ufs_hba *hba) | |
| { | |
| if (!hba->clk_gating.is_initialized) | |
| return; | |
| ufshcd_remove_clk_gating_sysfs(hba); | |
| /* Ungate the clock if necessary. */ | |
| ufshcd_hold(hba); | |
| hba->clk_gating.is_initialized = false; | |
| ufshcd_release(hba); | |
| destroy_workqueue(hba->clk_gating.clk_gating_workq); | |
| } | |
| static void ufshcd_clk_scaling_start_busy(struct ufs_hba *hba) | |
| { | |
| bool queue_resume_work = false; | |
| ktime_t curr_t; | |
| if (!ufshcd_is_clkscaling_supported(hba)) | |
| return; | |
| curr_t = ktime_get(); | |
| guard(spinlock_irqsave)(&hba->clk_scaling.lock); | |
| if (!hba->clk_scaling.active_reqs++) | |
| queue_resume_work = true; | |
| if (!hba->clk_scaling.is_enabled || hba->pm_op_in_progress) | |
| return; | |
| if (queue_resume_work) | |
| queue_work(hba->clk_scaling.workq, | |
| &hba->clk_scaling.resume_work); | |
| if (!hba->clk_scaling.window_start_t) { | |
| hba->clk_scaling.window_start_t = curr_t; | |
| hba->clk_scaling.tot_busy_t = 0; | |
| hba->clk_scaling.is_busy_started = false; | |
| } | |
| if (!hba->clk_scaling.is_busy_started) { | |
| hba->clk_scaling.busy_start_t = curr_t; | |
| hba->clk_scaling.is_busy_started = true; | |
| } | |
| } | |
| static void ufshcd_clk_scaling_update_busy(struct ufs_hba *hba) | |
| { | |
| struct ufs_clk_scaling *scaling = &hba->clk_scaling; | |
| if (!ufshcd_is_clkscaling_supported(hba)) | |
| return; | |
| guard(spinlock_irqsave)(&hba->clk_scaling.lock); | |
| hba->clk_scaling.active_reqs--; | |
| if (!scaling->active_reqs && scaling->is_busy_started) { | |
| scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(), | |
| scaling->busy_start_t)); | |
| scaling->busy_start_t = 0; | |
| scaling->is_busy_started = false; | |
| } | |
| } | |
| static inline int ufshcd_monitor_opcode2dir(u8 opcode) | |
| { | |
| if (opcode == READ_6 || opcode == READ_10 || opcode == READ_16) | |
| return READ; | |
| else if (opcode == WRITE_6 || opcode == WRITE_10 || opcode == WRITE_16) | |
| return WRITE; | |
| else | |
| return -EINVAL; | |
| } | |
| /* Must only be called for SCSI commands. */ | |
| static inline bool ufshcd_should_inform_monitor(struct ufs_hba *hba, | |
| struct scsi_cmnd *cmd) | |
| { | |
| const struct ufs_hba_monitor *m = &hba->monitor; | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| return m->enabled && | |
| (!m->chunk_size || m->chunk_size == cmd->sdb.length) && | |
| ktime_before(hba->monitor.enabled_ts, lrbp->issue_time_stamp); | |
| } | |
| static void ufshcd_start_monitor(struct ufs_hba *hba, struct scsi_cmnd *cmd) | |
| { | |
| int dir = ufshcd_monitor_opcode2dir(cmd->cmnd[0]); | |
| unsigned long flags; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (dir >= 0 && hba->monitor.nr_queued[dir]++ == 0) | |
| hba->monitor.busy_start_ts[dir] = ktime_get(); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| } | |
| static void ufshcd_update_monitor(struct ufs_hba *hba, struct scsi_cmnd *cmd) | |
| { | |
| struct request *req = scsi_cmd_to_rq(cmd); | |
| const struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| int dir = ufshcd_monitor_opcode2dir(cmd->cmnd[0]); | |
| unsigned long flags; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (dir >= 0 && hba->monitor.nr_queued[dir] > 0) { | |
| struct ufs_hba_monitor *m = &hba->monitor; | |
| ktime_t now, inc, lat; | |
| now = lrbp->compl_time_stamp; | |
| inc = ktime_sub(now, m->busy_start_ts[dir]); | |
| m->total_busy[dir] = ktime_add(m->total_busy[dir], inc); | |
| m->nr_sec_rw[dir] += blk_rq_sectors(req); | |
| /* Update latencies */ | |
| m->nr_req[dir]++; | |
| lat = ktime_sub(now, lrbp->issue_time_stamp); | |
| m->lat_sum[dir] += lat; | |
| if (m->lat_max[dir] < lat || !m->lat_max[dir]) | |
| m->lat_max[dir] = lat; | |
| if (m->lat_min[dir] > lat || !m->lat_min[dir]) | |
| m->lat_min[dir] = lat; | |
| m->nr_queued[dir]--; | |
| /* Push forward the busy start of monitor */ | |
| m->busy_start_ts[dir] = now; | |
| } | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| } | |
| /* Returns %true for SCSI commands and %false for device management commands. */ | |
| static bool ufshcd_is_scsi_cmd(struct scsi_cmnd *cmd) | |
| { | |
| return !blk_mq_is_reserved_rq(scsi_cmd_to_rq(cmd)); | |
| } | |
| /** | |
| * ufshcd_send_command - Send SCSI or device management commands | |
| * @hba: per adapter instance | |
| * @cmd: SCSI command or device management command pointer | |
| * @hwq: pointer to hardware queue instance | |
| */ | |
| static inline void ufshcd_send_command(struct ufs_hba *hba, | |
| struct scsi_cmnd *cmd, | |
| struct ufs_hw_queue *hwq) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| const int tag = scsi_cmd_to_rq(cmd)->tag; | |
| unsigned long flags; | |
| if (hba->monitor.enabled) { | |
| lrbp->issue_time_stamp = ktime_get(); | |
| lrbp->issue_time_stamp_local_clock = local_clock(); | |
| lrbp->compl_time_stamp = ktime_set(0, 0); | |
| lrbp->compl_time_stamp_local_clock = 0; | |
| } | |
| if (ufshcd_is_scsi_cmd(cmd)) { | |
| ufshcd_add_command_trace(hba, cmd, UFS_CMD_SEND); | |
| ufshcd_clk_scaling_start_busy(hba); | |
| if (unlikely(ufshcd_should_inform_monitor(hba, cmd))) | |
| ufshcd_start_monitor(hba, cmd); | |
| } | |
| if (hba->mcq_enabled) { | |
| int utrd_size = sizeof(struct utp_transfer_req_desc); | |
| struct utp_transfer_req_desc *src = lrbp->utr_descriptor_ptr; | |
| struct utp_transfer_req_desc *dest; | |
| spin_lock(&hwq->sq_lock); | |
| dest = hwq->sqe_base_addr + hwq->sq_tail_slot; | |
| memcpy(dest, src, utrd_size); | |
| ufshcd_inc_sq_tail(hwq); | |
| spin_unlock(&hwq->sq_lock); | |
| } else { | |
| spin_lock_irqsave(&hba->outstanding_lock, flags); | |
| if (hba->vops && hba->vops->setup_xfer_req) | |
| hba->vops->setup_xfer_req(hba, tag, | |
| ufshcd_is_scsi_cmd(cmd)); | |
| __set_bit(tag, &hba->outstanding_reqs); | |
| ufshcd_writel(hba, 1 << tag, REG_UTP_TRANSFER_REQ_DOOR_BELL); | |
| spin_unlock_irqrestore(&hba->outstanding_lock, flags); | |
| } | |
| } | |
| /** | |
| * ufshcd_copy_sense_data - Copy sense data in case of check condition | |
| * @cmd: SCSI command | |
| */ | |
| static inline void ufshcd_copy_sense_data(struct scsi_cmnd *cmd) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| u8 *const sense_buffer = cmd->sense_buffer; | |
| u16 resp_len; | |
| int len; | |
| resp_len = be16_to_cpu(lrbp->ucd_rsp_ptr->header.data_segment_length); | |
| if (sense_buffer && resp_len) { | |
| int len_to_copy; | |
| len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len); | |
| len_to_copy = min_t(int, UFS_SENSE_SIZE, len); | |
| memcpy(sense_buffer, lrbp->ucd_rsp_ptr->sr.sense_data, | |
| len_to_copy); | |
| } | |
| } | |
| /** | |
| * ufshcd_copy_query_response() - Copy the Query Response and the data | |
| * descriptor | |
| * @hba: per adapter instance | |
| * @lrbp: pointer to local reference block | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| static | |
| int ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) | |
| { | |
| struct ufs_query_res *query_res = &hba->dev_cmd.query.response; | |
| memcpy(&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr, QUERY_OSF_SIZE); | |
| /* Get the descriptor */ | |
| if (hba->dev_cmd.query.descriptor && | |
| lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) { | |
| u8 *descp = (u8 *)lrbp->ucd_rsp_ptr + | |
| GENERAL_UPIU_REQUEST_SIZE; | |
| u16 resp_len; | |
| u16 buf_len; | |
| /* data segment length */ | |
| resp_len = be16_to_cpu(lrbp->ucd_rsp_ptr->header | |
| .data_segment_length); | |
| buf_len = be16_to_cpu( | |
| hba->dev_cmd.query.request.upiu_req.length); | |
| if (likely(buf_len >= resp_len)) { | |
| memcpy(hba->dev_cmd.query.descriptor, descp, resp_len); | |
| } else { | |
| dev_warn(hba->dev, | |
| "%s: rsp size %d is bigger than buffer size %d", | |
| __func__, resp_len, buf_len); | |
| return -EINVAL; | |
| } | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ufshcd_hba_capabilities - Read controller capabilities | |
| * @hba: per adapter instance | |
| * | |
| * Return: 0 on success, negative on error. | |
| */ | |
| static inline int ufshcd_hba_capabilities(struct ufs_hba *hba) | |
| { | |
| int err; | |
| hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES); | |
| /* nutrs and nutmrs are 0 based values */ | |
| hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS_SDB) + 1; | |
| hba->nutmrs = | |
| ((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1; | |
| if (hba->vops && hba->vops->get_hba_nortt) | |
| hba->nortt = hba->vops->get_hba_nortt(hba); | |
| else | |
| hba->nortt = FIELD_GET(MASK_NUMBER_OUTSTANDING_RTT, hba->capabilities) + 1; | |
| /* Read crypto capabilities */ | |
| err = ufshcd_hba_init_crypto_capabilities(hba); | |
| if (err) { | |
| dev_err(hba->dev, "crypto setup failed\n"); | |
| return err; | |
| } | |
| /* | |
| * The UFSHCI 3.0 specification does not define MCQ_SUPPORT and | |
| * LSDB_SUPPORT, but [31:29] as reserved bits with reset value 0s, which | |
| * means we can simply read values regardless of version. | |
| */ | |
| hba->mcq_sup = FIELD_GET(MASK_MCQ_SUPPORT, hba->capabilities); | |
| /* | |
| * 0h: legacy single doorbell support is available | |
| * 1h: indicate that legacy single doorbell support has been removed | |
| */ | |
| if (!(hba->quirks & UFSHCD_QUIRK_BROKEN_LSDBS_CAP)) | |
| hba->lsdb_sup = !FIELD_GET(MASK_LSDB_SUPPORT, hba->capabilities); | |
| else | |
| hba->lsdb_sup = true; | |
| hba->mcq_capabilities = ufshcd_readl(hba, REG_MCQCAP); | |
| return 0; | |
| } | |
| /** | |
| * ufshcd_ready_for_uic_cmd - Check if controller is ready | |
| * to accept UIC commands | |
| * @hba: per adapter instance | |
| * | |
| * Return: true on success, else false. | |
| */ | |
| static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba) | |
| { | |
| u32 val; | |
| int ret = read_poll_timeout(ufshcd_readl, val, val & UIC_COMMAND_READY, | |
| 500, uic_cmd_timeout * 1000, false, hba, | |
| REG_CONTROLLER_STATUS); | |
| return ret == 0; | |
| } | |
| /** | |
| * ufshcd_get_upmcrs - Get the power mode change request status | |
| * @hba: Pointer to adapter instance | |
| * | |
| * This function gets the UPMCRS field of HCS register | |
| * | |
| * Return: value of UPMCRS field. | |
| */ | |
| static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba) | |
| { | |
| return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7; | |
| } | |
| /** | |
| * ufshcd_dispatch_uic_cmd - Dispatch an UIC command to the Unipro layer | |
| * @hba: per adapter instance | |
| * @uic_cmd: UIC command | |
| */ | |
| static inline void | |
| ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) | |
| { | |
| lockdep_assert_held(&hba->uic_cmd_mutex); | |
| WARN_ON(hba->active_uic_cmd); | |
| WARN_ON_ONCE(uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT); | |
| hba->active_uic_cmd = uic_cmd; | |
| /* Write Args */ | |
| ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1); | |
| ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2); | |
| ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3); | |
| ufshcd_add_uic_command_trace(hba, uic_cmd, UFS_CMD_SEND); | |
| /* Write UIC Cmd */ | |
| ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK, | |
| REG_UIC_COMMAND); | |
| } | |
| /** | |
| * ufshcd_wait_for_uic_cmd - Wait for completion of an UIC command | |
| * @hba: per adapter instance | |
| * @uic_cmd: UIC command | |
| * | |
| * Return: 0 only if success. | |
| */ | |
| static int | |
| ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) | |
| { | |
| int ret; | |
| unsigned long flags; | |
| lockdep_assert_held(&hba->uic_cmd_mutex); | |
| if (wait_for_completion_timeout(&uic_cmd->done, | |
| msecs_to_jiffies(uic_cmd_timeout))) { | |
| ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT; | |
| } else { | |
| ret = -ETIMEDOUT; | |
| dev_err(hba->dev, | |
| "uic cmd 0x%x with arg3 0x%x completion timeout\n", | |
| uic_cmd->command, uic_cmd->argument3); | |
| if (!uic_cmd->cmd_active) { | |
| dev_err(hba->dev, "%s: UIC cmd has been completed, return the result\n", | |
| __func__); | |
| ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT; | |
| } | |
| } | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| hba->active_uic_cmd = NULL; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| return ret; | |
| } | |
| /** | |
| * __ufshcd_send_uic_cmd - Send UIC commands and retrieve the result | |
| * @hba: per adapter instance | |
| * @uic_cmd: UIC command | |
| * | |
| * Return: 0 if successful; < 0 upon failure. | |
| */ | |
| static int | |
| __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) | |
| { | |
| lockdep_assert_held(&hba->uic_cmd_mutex); | |
| if (!ufshcd_ready_for_uic_cmd(hba)) { | |
| dev_err(hba->dev, | |
| "Controller not ready to accept UIC commands\n"); | |
| return -EIO; | |
| } | |
| init_completion(&uic_cmd->done); | |
| uic_cmd->cmd_active = true; | |
| ufshcd_dispatch_uic_cmd(hba, uic_cmd); | |
| return 0; | |
| } | |
| /** | |
| * ufshcd_send_uic_cmd - Send UIC commands and retrieve the result | |
| * @hba: per adapter instance | |
| * @uic_cmd: UIC command | |
| * | |
| * Return: 0 only if success. | |
| */ | |
| int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) | |
| { | |
| unsigned long flags; | |
| int ret; | |
| if (hba->quirks & UFSHCD_QUIRK_BROKEN_UIC_CMD) | |
| return 0; | |
| ufshcd_hold(hba); | |
| mutex_lock(&hba->uic_cmd_mutex); | |
| ufshcd_add_delay_before_dme_cmd(hba); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| ufshcd_enable_intr(hba, UIC_COMMAND_COMPL); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| ret = __ufshcd_send_uic_cmd(hba, uic_cmd); | |
| if (!ret) | |
| ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd); | |
| mutex_unlock(&hba->uic_cmd_mutex); | |
| ufshcd_release(hba); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_sgl_to_prdt - SG list to PRTD (Physical Region Description Table, 4DW format) | |
| * @hba: per-adapter instance | |
| * @lrbp: pointer to local reference block | |
| * @sg_entries: The number of sg lists actually used | |
| * @sg_list: Pointer to SG list | |
| */ | |
| static void ufshcd_sgl_to_prdt(struct ufs_hba *hba, struct ufshcd_lrb *lrbp, int sg_entries, | |
| struct scatterlist *sg_list) | |
| { | |
| struct ufshcd_sg_entry *prd; | |
| struct scatterlist *sg; | |
| int i; | |
| if (sg_entries) { | |
| if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) | |
| lrbp->utr_descriptor_ptr->prd_table_length = | |
| cpu_to_le16(sg_entries * ufshcd_sg_entry_size(hba)); | |
| else | |
| lrbp->utr_descriptor_ptr->prd_table_length = cpu_to_le16(sg_entries); | |
| prd = lrbp->ucd_prdt_ptr; | |
| for_each_sg(sg_list, sg, sg_entries, i) { | |
| const unsigned int len = sg_dma_len(sg); | |
| /* | |
| * From the UFSHCI spec: "Data Byte Count (DBC): A '0' | |
| * based value that indicates the length, in bytes, of | |
| * the data block. A maximum of length of 256KB may | |
| * exist for any entry. Bits 1:0 of this field shall be | |
| * 11b to indicate Dword granularity. A value of '3' | |
| * indicates 4 bytes, '7' indicates 8 bytes, etc." | |
| */ | |
| WARN_ONCE(len > SZ_256K, "len = %#x\n", len); | |
| prd->size = cpu_to_le32(len - 1); | |
| prd->addr = cpu_to_le64(sg->dma_address); | |
| prd->reserved = 0; | |
| prd = (void *)prd + ufshcd_sg_entry_size(hba); | |
| } | |
| } else { | |
| lrbp->utr_descriptor_ptr->prd_table_length = 0; | |
| } | |
| } | |
| /** | |
| * ufshcd_map_sg - Map scatter-gather list to prdt | |
| * @hba: per adapter instance | |
| * @cmd: SCSI command | |
| * | |
| * Return: 0 in case of success, non-zero value in case of failure. | |
| */ | |
| static int ufshcd_map_sg(struct ufs_hba *hba, struct scsi_cmnd *cmd) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| int sg_segments = scsi_dma_map(cmd); | |
| if (sg_segments < 0) | |
| return sg_segments; | |
| ufshcd_sgl_to_prdt(hba, lrbp, sg_segments, scsi_sglist(cmd)); | |
| return ufshcd_crypto_fill_prdt(hba, cmd); | |
| } | |
| /** | |
| * ufshcd_prepare_req_desc_hdr - Fill UTP Transfer request descriptor header according to request | |
| * descriptor according to request | |
| * @hba: per adapter instance | |
| * @lrbp: pointer to local reference block | |
| * @upiu_flags: flags required in the header | |
| * @cmd_dir: requests data direction | |
| * @ehs_length: Total EHS Length (in 32‐bytes units of all Extra Header Segments) | |
| */ | |
| static void | |
| ufshcd_prepare_req_desc_hdr(struct ufs_hba *hba, struct ufshcd_lrb *lrbp, | |
| u8 *upiu_flags, enum dma_data_direction cmd_dir, | |
| int ehs_length) | |
| { | |
| struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr; | |
| struct request_desc_header *h = &req_desc->header; | |
| enum utp_data_direction data_direction; | |
| lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE; | |
| *h = (typeof(*h)){ }; | |
| if (cmd_dir == DMA_FROM_DEVICE) { | |
| data_direction = UTP_DEVICE_TO_HOST; | |
| *upiu_flags = UPIU_CMD_FLAGS_READ; | |
| } else if (cmd_dir == DMA_TO_DEVICE) { | |
| data_direction = UTP_HOST_TO_DEVICE; | |
| *upiu_flags = UPIU_CMD_FLAGS_WRITE; | |
| } else { | |
| data_direction = UTP_NO_DATA_TRANSFER; | |
| *upiu_flags = UPIU_CMD_FLAGS_NONE; | |
| } | |
| h->command_type = lrbp->command_type; | |
| h->data_direction = data_direction; | |
| h->ehs_length = ehs_length; | |
| if (lrbp->intr_cmd) | |
| h->interrupt = 1; | |
| /* Prepare crypto related dwords */ | |
| ufshcd_prepare_req_desc_hdr_crypto(lrbp, h); | |
| /* | |
| * assigning invalid value for command status. Controller | |
| * updates OCS on command completion, with the command | |
| * status | |
| */ | |
| h->ocs = OCS_INVALID_COMMAND_STATUS; | |
| req_desc->prd_table_length = 0; | |
| } | |
| /** | |
| * ufshcd_prepare_utp_scsi_cmd_upiu() - fills the utp_transfer_req_desc, | |
| * for scsi commands | |
| * @cmd: SCSI command | |
| * @upiu_flags: flags | |
| */ | |
| static void ufshcd_prepare_utp_scsi_cmd_upiu(struct scsi_cmnd *cmd, | |
| u8 upiu_flags) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| const int tag = scsi_cmd_to_rq(cmd)->tag; | |
| struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; | |
| unsigned short cdb_len; | |
| ucd_req_ptr->header = (struct utp_upiu_header){ | |
| .transaction_code = UPIU_TRANSACTION_COMMAND, | |
| .flags = upiu_flags, | |
| .lun = lrbp->lun, | |
| .task_tag = tag, | |
| .command_set_type = UPIU_COMMAND_SET_TYPE_SCSI, | |
| }; | |
| WARN_ON_ONCE(ucd_req_ptr->header.task_tag != tag); | |
| ucd_req_ptr->sc.exp_data_transfer_len = cpu_to_be32(cmd->sdb.length); | |
| cdb_len = min_t(unsigned short, cmd->cmd_len, UFS_CDB_SIZE); | |
| memcpy(ucd_req_ptr->sc.cdb, cmd->cmnd, cdb_len); | |
| memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); | |
| } | |
| /** | |
| * ufshcd_prepare_utp_query_req_upiu() - fill the utp_transfer_req_desc for query request | |
| * @hba: UFS hba | |
| * @cmd: SCSI command pointer | |
| * @upiu_flags: flags | |
| */ | |
| static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba, | |
| struct scsi_cmnd *cmd, u8 upiu_flags) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; | |
| const int tag = scsi_cmd_to_rq(cmd)->tag; | |
| struct ufs_query *query = &hba->dev_cmd.query; | |
| u16 len = be16_to_cpu(query->request.upiu_req.length); | |
| /* Query request header */ | |
| ucd_req_ptr->header = (struct utp_upiu_header){ | |
| .transaction_code = UPIU_TRANSACTION_QUERY_REQ, | |
| .flags = upiu_flags, | |
| .lun = lrbp->lun, | |
| .task_tag = tag, | |
| .query_function = query->request.query_func, | |
| /* Data segment length only need for WRITE_DESC */ | |
| .data_segment_length = | |
| query->request.upiu_req.opcode == | |
| UPIU_QUERY_OPCODE_WRITE_DESC ? | |
| cpu_to_be16(len) : | |
| 0, | |
| }; | |
| /* Copy the Query Request buffer as is */ | |
| memcpy(&ucd_req_ptr->qr, &query->request.upiu_req, | |
| QUERY_OSF_SIZE); | |
| /* Copy the Descriptor */ | |
| if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC) | |
| memcpy(ucd_req_ptr + 1, query->descriptor, len); | |
| } | |
| static inline void ufshcd_prepare_utp_nop_upiu(struct scsi_cmnd *cmd) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; | |
| const int tag = scsi_cmd_to_rq(cmd)->tag; | |
| memset(ucd_req_ptr, 0, sizeof(struct utp_upiu_req)); | |
| ucd_req_ptr->header = (struct utp_upiu_header){ | |
| .transaction_code = UPIU_TRANSACTION_NOP_OUT, | |
| .task_tag = tag, | |
| }; | |
| } | |
| /** | |
| * ufshcd_compose_devman_upiu - UFS Protocol Information Unit(UPIU) | |
| * for Device Management Purposes | |
| * @hba: per adapter instance | |
| * @cmd: SCSI command pointer | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| static int ufshcd_compose_devman_upiu(struct ufs_hba *hba, | |
| struct scsi_cmnd *cmd) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| u8 upiu_flags; | |
| int ret = 0; | |
| ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE, 0); | |
| if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) | |
| ufshcd_prepare_utp_query_req_upiu(hba, cmd, upiu_flags); | |
| else if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP) | |
| ufshcd_prepare_utp_nop_upiu(cmd); | |
| else | |
| ret = -EINVAL; | |
| memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_comp_scsi_upiu - UFS Protocol Information Unit(UPIU) | |
| * for SCSI Purposes | |
| * @hba: per adapter instance | |
| * @cmd: SCSI command | |
| */ | |
| static void ufshcd_comp_scsi_upiu(struct ufs_hba *hba, struct scsi_cmnd *cmd) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| struct request *rq = scsi_cmd_to_rq(cmd); | |
| unsigned int ioprio_class = IOPRIO_PRIO_CLASS(req_get_ioprio(rq)); | |
| u8 upiu_flags; | |
| ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, | |
| cmd->sc_data_direction, 0); | |
| if (ioprio_class == IOPRIO_CLASS_RT) | |
| upiu_flags |= UPIU_CMD_FLAGS_CP; | |
| ufshcd_prepare_utp_scsi_cmd_upiu(cmd, upiu_flags); | |
| } | |
| static void ufshcd_init_lrb(struct ufs_hba *hba, struct scsi_cmnd *cmd) | |
| { | |
| const int i = scsi_cmd_to_rq(cmd)->tag; | |
| struct utp_transfer_req_desc *utrdlp = hba->utrdl_base_addr; | |
| u16 response_offset = le16_to_cpu(utrdlp[i].response_upiu_offset); | |
| u16 prdt_offset = le16_to_cpu(utrdlp[i].prd_table_offset); | |
| struct ufshcd_lrb *lrb = scsi_cmd_priv(cmd); | |
| u8 *command_upiu, *response_upiu, *prd_table; | |
| dma_addr_t cmd_desc_element_addr; | |
| /* The reserved tag uses a dedicated UCD outside the pool. */ | |
| if (unlikely(blk_mq_is_reserved_rq(scsi_cmd_to_rq(cmd)))) { | |
| struct utp_devman_cmd_desc *cmd_descp = hba->devman_ucd_base_addr; | |
| cmd_desc_element_addr = hba->devman_ucd_dma_addr; | |
| command_upiu = cmd_descp->command_upiu; | |
| response_upiu = cmd_descp->response_upiu; | |
| prd_table = cmd_descp->prd_table; | |
| } else { | |
| int slot = i - UFSHCD_NUM_RESERVED; | |
| struct utp_transfer_cmd_desc *cmd_descp; | |
| /* Non-reserved tags start at UFSHCD_NUM_RESERVED, so slot >= 0. */ | |
| WARN_ON_ONCE(slot < 0); | |
| cmd_descp = (void *)hba->ucdl_base_addr + slot * ufshcd_get_ucd_size(hba); | |
| cmd_desc_element_addr = | |
| hba->ucdl_dma_addr + slot * ufshcd_get_ucd_size(hba); | |
| command_upiu = cmd_descp->command_upiu; | |
| response_upiu = cmd_descp->response_upiu; | |
| prd_table = cmd_descp->prd_table; | |
| } | |
| lrb->utr_descriptor_ptr = utrdlp + i; | |
| lrb->utrd_dma_addr = | |
| hba->utrdl_dma_addr + i * sizeof(struct utp_transfer_req_desc); | |
| lrb->ucd_req_ptr = (struct utp_upiu_req *)command_upiu; | |
| lrb->ucd_req_dma_addr = cmd_desc_element_addr; | |
| lrb->ucd_rsp_ptr = (struct utp_upiu_rsp *)response_upiu; | |
| lrb->ucd_rsp_dma_addr = cmd_desc_element_addr + response_offset; | |
| lrb->ucd_prdt_ptr = (struct ufshcd_sg_entry *)prd_table; | |
| lrb->ucd_prdt_dma_addr = cmd_desc_element_addr + prdt_offset; | |
| } | |
| static void __ufshcd_setup_cmd(struct ufs_hba *hba, struct scsi_cmnd *cmd, | |
| u8 lun, int tag) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| ufshcd_init_lrb(hba, cmd); | |
| memset(lrbp->ucd_req_ptr, 0, sizeof(*lrbp->ucd_req_ptr)); | |
| lrbp->lun = lun; | |
| ufshcd_prepare_lrbp_crypto(ufshcd_is_scsi_cmd(cmd) ? | |
| scsi_cmd_to_rq(cmd) : NULL, lrbp); | |
| } | |
| static void ufshcd_setup_scsi_cmd(struct ufs_hba *hba, struct scsi_cmnd *cmd, | |
| u8 lun, int tag) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| __ufshcd_setup_cmd(hba, cmd, lun, tag); | |
| lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba); | |
| lrbp->req_abort_skip = false; | |
| ufshcd_comp_scsi_upiu(hba, cmd); | |
| } | |
| /** | |
| * ufshcd_upiu_wlun_to_scsi_wlun - maps UPIU W-LUN id to SCSI W-LUN ID | |
| * @upiu_wlun_id: UPIU W-LUN id | |
| * | |
| * Return: SCSI W-LUN id. | |
| */ | |
| static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id) | |
| { | |
| return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE; | |
| } | |
| static inline bool is_device_wlun(struct scsi_device *sdev) | |
| { | |
| return sdev->lun == | |
| ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN); | |
| } | |
| /* | |
| * Associate the UFS controller queue with the default and poll HCTX types. | |
| * Initialize the mq_map[] arrays. | |
| */ | |
| static void ufshcd_map_queues(struct Scsi_Host *shost) | |
| { | |
| struct ufs_hba *hba = shost_priv(shost); | |
| int i, queue_offset = 0; | |
| if (!is_mcq_supported(hba)) { | |
| hba->nr_queues[HCTX_TYPE_DEFAULT] = 1; | |
| hba->nr_queues[HCTX_TYPE_READ] = 0; | |
| hba->nr_queues[HCTX_TYPE_POLL] = 1; | |
| hba->nr_hw_queues = 1; | |
| } | |
| for (i = 0; i < shost->nr_maps; i++) { | |
| struct blk_mq_queue_map *map = &shost->tag_set.map[i]; | |
| map->nr_queues = hba->nr_queues[i]; | |
| if (!map->nr_queues) | |
| continue; | |
| map->queue_offset = queue_offset; | |
| if (i == HCTX_TYPE_POLL && !is_mcq_supported(hba)) | |
| map->queue_offset = 0; | |
| blk_mq_map_queues(map); | |
| queue_offset += map->nr_queues; | |
| } | |
| } | |
| /* | |
| * The only purpose of this function is to make the SCSI core skip the memset() | |
| * call for the private command data. | |
| */ | |
| static int ufshcd_init_cmd_priv(struct Scsi_Host *host, struct scsi_cmnd *cmd) | |
| { | |
| return 0; | |
| } | |
| /** | |
| * ufshcd_queuecommand - main entry point for SCSI requests | |
| * @host: SCSI host pointer | |
| * @cmd: command from SCSI Midlayer | |
| * | |
| * Return: 0 for success, non-zero in case of failure. | |
| */ | |
| static enum scsi_qc_status ufshcd_queuecommand(struct Scsi_Host *host, | |
| struct scsi_cmnd *cmd) | |
| { | |
| struct ufs_hba *hba = shost_priv(host); | |
| int tag = scsi_cmd_to_rq(cmd)->tag; | |
| int err = 0; | |
| struct ufs_hw_queue *hwq = NULL; | |
| switch (hba->ufshcd_state) { | |
| case UFSHCD_STATE_OPERATIONAL: | |
| break; | |
| case UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: | |
| /* | |
| * SCSI error handler can call ->queuecommand() while UFS error | |
| * handler is in progress. Error interrupts could change the | |
| * state from UFSHCD_STATE_RESET to | |
| * UFSHCD_STATE_EH_SCHEDULED_NON_FATAL. Prevent requests | |
| * being issued in that case. | |
| */ | |
| if (ufshcd_eh_in_progress(hba)) { | |
| err = SCSI_MLQUEUE_HOST_BUSY; | |
| goto out; | |
| } | |
| break; | |
| case UFSHCD_STATE_EH_SCHEDULED_FATAL: | |
| /* | |
| * pm_runtime_get_sync() is used at error handling preparation | |
| * stage. If a scsi cmd, e.g. the SSU cmd, is sent from hba's | |
| * PM ops, it can never be finished if we let SCSI layer keep | |
| * retrying it, which gets err handler stuck forever. Neither | |
| * can we let the scsi cmd pass through, because UFS is in bad | |
| * state, the scsi cmd may eventually time out, which will get | |
| * err handler blocked for too long. So, just fail the scsi cmd | |
| * sent from PM ops, err handler can recover PM error anyways. | |
| */ | |
| if (hba->pm_op_in_progress) { | |
| hba->force_reset = true; | |
| set_host_byte(cmd, DID_BAD_TARGET); | |
| scsi_done(cmd); | |
| goto out; | |
| } | |
| fallthrough; | |
| case UFSHCD_STATE_RESET: | |
| err = SCSI_MLQUEUE_HOST_BUSY; | |
| goto out; | |
| case UFSHCD_STATE_ERROR: | |
| set_host_byte(cmd, DID_ERROR); | |
| scsi_done(cmd); | |
| goto out; | |
| } | |
| hba->req_abort_count = 0; | |
| ufshcd_hold(hba); | |
| ufshcd_setup_scsi_cmd(hba, cmd, | |
| ufshcd_scsi_to_upiu_lun(cmd->device->lun), tag); | |
| err = ufshcd_map_sg(hba, cmd); | |
| if (err) { | |
| ufshcd_release(hba); | |
| goto out; | |
| } | |
| if (hba->mcq_enabled) | |
| hwq = ufshcd_mcq_req_to_hwq(hba, scsi_cmd_to_rq(cmd)); | |
| ufshcd_send_command(hba, cmd, hwq); | |
| out: | |
| if (ufs_trigger_eh(hba)) { | |
| unsigned long flags; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| ufshcd_schedule_eh_work(hba); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| } | |
| return err; | |
| } | |
| static enum scsi_qc_status ufshcd_queue_reserved_command(struct Scsi_Host *host, | |
| struct scsi_cmnd *cmd) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| struct request *rq = scsi_cmd_to_rq(cmd); | |
| struct ufs_hba *hba = shost_priv(host); | |
| struct ufs_hw_queue *hwq = | |
| hba->mcq_enabled ? ufshcd_mcq_req_to_hwq(hba, rq) : NULL; | |
| ufshcd_add_query_upiu_trace(hba, UFS_QUERY_SEND, lrbp->ucd_req_ptr); | |
| ufshcd_send_command(hba, cmd, hwq); | |
| return 0; | |
| } | |
| static void ufshcd_setup_dev_cmd(struct ufs_hba *hba, struct scsi_cmnd *cmd, | |
| enum dev_cmd_type cmd_type, u8 lun, int tag) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| __ufshcd_setup_cmd(hba, cmd, lun, tag); | |
| lrbp->intr_cmd = true; /* No interrupt aggregation */ | |
| hba->dev_cmd.type = cmd_type; | |
| hba->dev_cmd.tag = tag; | |
| } | |
| /* | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| static int ufshcd_compose_dev_cmd(struct ufs_hba *hba, struct scsi_cmnd *cmd, | |
| enum dev_cmd_type cmd_type, int tag) | |
| { | |
| ufshcd_setup_dev_cmd(hba, cmd, cmd_type, 0, tag); | |
| return ufshcd_compose_devman_upiu(hba, cmd); | |
| } | |
| /* | |
| * Check with the block layer if the command is inflight | |
| * @cmd: command to check. | |
| * | |
| * Return: true if command is inflight; false if not. | |
| */ | |
| bool ufshcd_cmd_inflight(struct scsi_cmnd *cmd) | |
| { | |
| return cmd && blk_mq_rq_state(scsi_cmd_to_rq(cmd)) == MQ_RQ_IN_FLIGHT; | |
| } | |
| /* | |
| * Clear the pending command in the controller and wait until | |
| * the controller confirms that the command has been cleared. | |
| * @hba: per adapter instance | |
| * @task_tag: The tag number of the command to be cleared. | |
| */ | |
| static int ufshcd_clear_cmd(struct ufs_hba *hba, u32 task_tag) | |
| { | |
| u32 mask; | |
| int err; | |
| if (hba->mcq_enabled) { | |
| /* | |
| * MCQ mode. Clean up the MCQ resources similar to | |
| * what the ufshcd_utrl_clear() does for SDB mode. | |
| */ | |
| err = ufshcd_mcq_sq_cleanup(hba, task_tag); | |
| if (err) { | |
| dev_err(hba->dev, "%s: failed tag=%d. err=%d\n", | |
| __func__, task_tag, err); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| mask = 1U << task_tag; | |
| /* clear outstanding transaction before retry */ | |
| ufshcd_utrl_clear(hba, mask); | |
| /* | |
| * wait for h/w to clear corresponding bit in door-bell. | |
| * max. wait is 1 sec. | |
| */ | |
| return ufshcd_wait_for_register(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL, | |
| mask, ~mask, 1000, 1000); | |
| } | |
| /** | |
| * ufshcd_dev_cmd_completion() - handles device management command responses | |
| * @hba: per adapter instance | |
| * @lrbp: pointer to local reference block | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| static int | |
| ufshcd_dev_cmd_completion(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) | |
| { | |
| enum upiu_response_transaction resp; | |
| int err = 0; | |
| hba->ufs_stats.last_hibern8_exit_tstamp = ktime_set(0, 0); | |
| resp = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr); | |
| switch (resp) { | |
| case UPIU_TRANSACTION_NOP_IN: | |
| if (hba->dev_cmd.type != DEV_CMD_TYPE_NOP) { | |
| err = -EINVAL; | |
| dev_err(hba->dev, "%s: unexpected response %x\n", | |
| __func__, resp); | |
| } | |
| break; | |
| case UPIU_TRANSACTION_QUERY_RSP: { | |
| u8 response = lrbp->ucd_rsp_ptr->header.response; | |
| if (response == 0) { | |
| err = ufshcd_copy_query_response(hba, lrbp); | |
| } else { | |
| err = -EINVAL; | |
| dev_err(hba->dev, "%s: unexpected response in Query RSP: %x\n", | |
| __func__, response); | |
| } | |
| break; | |
| } | |
| case UPIU_TRANSACTION_REJECT_UPIU: | |
| /* TODO: handle Reject UPIU Response */ | |
| err = -EPERM; | |
| dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n", | |
| __func__); | |
| break; | |
| case UPIU_TRANSACTION_RESPONSE: | |
| if (hba->dev_cmd.type != DEV_CMD_TYPE_RPMB) { | |
| err = -EINVAL; | |
| dev_err(hba->dev, "%s: unexpected response %x\n", __func__, resp); | |
| } | |
| break; | |
| default: | |
| err = -EINVAL; | |
| dev_err(hba->dev, "%s: Invalid device management cmd response: %x\n", | |
| __func__, resp); | |
| break; | |
| } | |
| WARN_ONCE(err > 0, "Incorrect return value %d > 0\n", err); | |
| return err; | |
| } | |
| static void ufshcd_dev_man_lock(struct ufs_hba *hba) | |
| __acquires(&hba->dev_cmd.lock) | |
| __acquires_shared(&hba->clk_scaling_lock) | |
| { | |
| ufshcd_hold(hba); | |
| mutex_lock(&hba->dev_cmd.lock); | |
| down_read(&hba->clk_scaling_lock); | |
| } | |
| static void ufshcd_dev_man_unlock(struct ufs_hba *hba) | |
| __releases_shared(&hba->clk_scaling_lock) | |
| __releases(&hba->dev_cmd.lock) | |
| { | |
| up_read(&hba->clk_scaling_lock); | |
| mutex_unlock(&hba->dev_cmd.lock); | |
| ufshcd_release(hba); | |
| } | |
| static struct scsi_cmnd *ufshcd_get_dev_mgmt_cmd(struct ufs_hba *hba) | |
| { | |
| /* | |
| * The caller must hold this lock to guarantee that the NOWAIT | |
| * allocation will succeed. | |
| */ | |
| lockdep_assert_held(&hba->dev_cmd.lock); | |
| return scsi_get_internal_cmd( | |
| hba->host->pseudo_sdev, DMA_TO_DEVICE, | |
| BLK_MQ_REQ_RESERVED | BLK_MQ_REQ_NOWAIT); | |
| } | |
| static void ufshcd_put_dev_mgmt_cmd(struct scsi_cmnd *cmd) | |
| { | |
| scsi_put_internal_cmd(cmd); | |
| } | |
| /* | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| static int ufshcd_issue_dev_cmd(struct ufs_hba *hba, struct scsi_cmnd *cmd, | |
| const u32 tag, int timeout) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| struct request *rq = scsi_cmd_to_rq(cmd); | |
| blk_status_t sts; | |
| rq->timeout = timeout; | |
| sts = blk_execute_rq(rq, true); | |
| if (sts != BLK_STS_OK) | |
| return blk_status_to_errno(sts); | |
| return lrbp->utr_descriptor_ptr->header.ocs; | |
| } | |
| /** | |
| * ufshcd_exec_dev_cmd - API for sending device management requests | |
| * @hba: UFS hba | |
| * @cmd_type: specifies the type (NOP, Query...) | |
| * @timeout: timeout in milliseconds | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| * | |
| * NOTE: Since there is only one available tag for device management commands, | |
| * it is expected you hold the hba->dev_cmd.lock mutex. | |
| */ | |
| static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, | |
| enum dev_cmd_type cmd_type, int timeout) | |
| { | |
| struct scsi_cmnd *cmd = ufshcd_get_dev_mgmt_cmd(hba); | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| u32 tag; | |
| int err; | |
| /* Protects use of hba->dev_cmd. */ | |
| lockdep_assert_held(&hba->dev_cmd.lock); | |
| if (WARN_ON_ONCE(!cmd)) | |
| return -ENOMEM; | |
| tag = scsi_cmd_to_rq(cmd)->tag; | |
| err = ufshcd_compose_dev_cmd(hba, cmd, cmd_type, tag); | |
| if (unlikely(err)) | |
| goto out; | |
| err = ufshcd_issue_dev_cmd(hba, cmd, tag, timeout); | |
| if (err == 0) | |
| err = ufshcd_dev_cmd_completion(hba, lrbp); | |
| out: | |
| ufshcd_put_dev_mgmt_cmd(cmd); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_init_query() - init the query response and request parameters | |
| * @hba: per-adapter instance | |
| * @request: address of the request pointer to be initialized | |
| * @response: address of the response pointer to be initialized | |
| * @opcode: operation to perform | |
| * @idn: flag idn to access | |
| * @index: LU number to access | |
| * @selector: query/flag/descriptor further identification | |
| */ | |
| static inline void ufshcd_init_query(struct ufs_hba *hba, | |
| struct ufs_query_req **request, struct ufs_query_res **response, | |
| enum query_opcode opcode, u8 idn, u8 index, u8 selector) | |
| { | |
| *request = &hba->dev_cmd.query.request; | |
| *response = &hba->dev_cmd.query.response; | |
| memset(*request, 0, sizeof(struct ufs_query_req)); | |
| memset(*response, 0, sizeof(struct ufs_query_res)); | |
| (*request)->upiu_req.opcode = opcode; | |
| (*request)->upiu_req.idn = idn; | |
| (*request)->upiu_req.index = index; | |
| (*request)->upiu_req.selector = selector; | |
| } | |
| /* | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| static int ufshcd_query_flag_retry(struct ufs_hba *hba, | |
| enum query_opcode opcode, enum flag_idn idn, u8 index, bool *flag_res) | |
| { | |
| int ret; | |
| int retries; | |
| for (retries = 0; retries < QUERY_REQ_RETRIES; retries++) { | |
| ret = ufshcd_query_flag(hba, opcode, idn, index, flag_res); | |
| if (ret) | |
| dev_dbg(hba->dev, | |
| "%s: failed with error %d, retries %d\n", | |
| __func__, ret, retries); | |
| else | |
| break; | |
| } | |
| if (ret) | |
| dev_err(hba->dev, | |
| "%s: query flag, opcode %d, idn %d, failed with error %d after %d retries\n", | |
| __func__, opcode, idn, ret, retries); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_query_flag() - API function for sending flag query requests | |
| * @hba: per-adapter instance | |
| * @opcode: flag query to perform | |
| * @idn: flag idn to access | |
| * @index: flag index to access | |
| * @flag_res: the flag value after the query request completes | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode, | |
| enum flag_idn idn, u8 index, bool *flag_res) | |
| { | |
| struct ufs_query_req *request = NULL; | |
| struct ufs_query_res *response = NULL; | |
| int err, selector = 0; | |
| int timeout = dev_cmd_timeout; | |
| BUG_ON(!hba); | |
| ufshcd_dev_man_lock(hba); | |
| ufshcd_init_query(hba, &request, &response, opcode, idn, index, | |
| selector); | |
| switch (opcode) { | |
| case UPIU_QUERY_OPCODE_SET_FLAG: | |
| case UPIU_QUERY_OPCODE_CLEAR_FLAG: | |
| case UPIU_QUERY_OPCODE_TOGGLE_FLAG: | |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; | |
| break; | |
| case UPIU_QUERY_OPCODE_READ_FLAG: | |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; | |
| if (!flag_res) { | |
| /* No dummy reads */ | |
| dev_err(hba->dev, "%s: Invalid argument for read request\n", | |
| __func__); | |
| err = -EINVAL; | |
| goto out_unlock; | |
| } | |
| break; | |
| default: | |
| dev_err(hba->dev, | |
| "%s: Expected query flag opcode but got = %d\n", | |
| __func__, opcode); | |
| err = -EINVAL; | |
| goto out_unlock; | |
| } | |
| err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, timeout); | |
| if (err) { | |
| dev_err(hba->dev, | |
| "%s: Sending flag query for idn %d failed, err = %d\n", | |
| __func__, idn, err); | |
| goto out_unlock; | |
| } | |
| if (flag_res) | |
| *flag_res = (be32_to_cpu(response->upiu_res.value) & | |
| MASK_QUERY_UPIU_FLAG_LOC) & 0x1; | |
| out_unlock: | |
| ufshcd_dev_man_unlock(hba); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_query_attr - API function for sending attribute requests | |
| * @hba: per-adapter instance | |
| * @opcode: attribute opcode | |
| * @idn: attribute idn to access | |
| * @index: index field | |
| * @selector: selector field | |
| * @attr_val: the attribute value after the query request completes | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode, | |
| enum attr_idn idn, u8 index, u8 selector, u32 *attr_val) | |
| { | |
| struct ufs_query_req *request = NULL; | |
| struct ufs_query_res *response = NULL; | |
| int err; | |
| BUG_ON(!hba); | |
| if (!attr_val) { | |
| dev_err(hba->dev, "%s: attribute value required for opcode 0x%x\n", | |
| __func__, opcode); | |
| return -EINVAL; | |
| } | |
| ufshcd_dev_man_lock(hba); | |
| ufshcd_init_query(hba, &request, &response, opcode, idn, index, | |
| selector); | |
| switch (opcode) { | |
| case UPIU_QUERY_OPCODE_WRITE_ATTR: | |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; | |
| request->upiu_req.value = cpu_to_be32(*attr_val); | |
| break; | |
| case UPIU_QUERY_OPCODE_READ_ATTR: | |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; | |
| break; | |
| default: | |
| dev_err(hba->dev, "%s: Expected query attr opcode but got = 0x%.2x\n", | |
| __func__, opcode); | |
| err = -EINVAL; | |
| goto out_unlock; | |
| } | |
| err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, dev_cmd_timeout); | |
| if (err) { | |
| dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, err = %d\n", | |
| __func__, opcode, idn, index, err); | |
| goto out_unlock; | |
| } | |
| *attr_val = be32_to_cpu(response->upiu_res.value); | |
| out_unlock: | |
| ufshcd_dev_man_unlock(hba); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_query_attr_retry() - API function for sending query | |
| * attribute with retries | |
| * @hba: per-adapter instance | |
| * @opcode: attribute opcode | |
| * @idn: attribute idn to access | |
| * @index: index field | |
| * @selector: selector field | |
| * @attr_val: the attribute value after the query request | |
| * completes | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| int ufshcd_query_attr_retry(struct ufs_hba *hba, | |
| enum query_opcode opcode, enum attr_idn idn, u8 index, u8 selector, | |
| u32 *attr_val) | |
| { | |
| int ret = 0; | |
| u32 retries; | |
| for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { | |
| ret = ufshcd_query_attr(hba, opcode, idn, index, | |
| selector, attr_val); | |
| if (ret) | |
| dev_dbg(hba->dev, "%s: failed with error %d, retries %d\n", | |
| __func__, ret, retries); | |
| else | |
| break; | |
| } | |
| if (ret) | |
| dev_err(hba->dev, | |
| "%s: query attribute, idn %d, failed with error %d after %d retries\n", | |
| __func__, idn, ret, QUERY_REQ_RETRIES); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_query_attr_qword - Function of sending query requests for quad-word attributes | |
| * @hba: per-adapter instance | |
| * @opcode: attribute opcode | |
| * @idn: attribute idn to access | |
| * @index: index field | |
| * @sel: selector field | |
| * @attr_val: the attribute value after the query request completes | |
| * | |
| * Return: 0 for success, non-zero in case of failure. | |
| */ | |
| int ufshcd_query_attr_qword(struct ufs_hba *hba, enum query_opcode opcode, | |
| enum attr_idn idn, u8 index, u8 sel, u64 *attr_val) | |
| { | |
| struct utp_upiu_query_v4_0 *upiu_req; | |
| struct utp_upiu_query_v4_0 *upiu_resp; | |
| struct ufs_query_req *request = NULL; | |
| struct ufs_query_res *response = NULL; | |
| int err; | |
| if (!attr_val) { | |
| dev_err(hba->dev, "%s: attribute value required for opcode 0x%x\n", | |
| __func__, opcode); | |
| return -EINVAL; | |
| } | |
| ufshcd_dev_man_lock(hba); | |
| ufshcd_init_query(hba, &request, &response, opcode, idn, index, sel); | |
| switch (opcode) { | |
| case UPIU_QUERY_OPCODE_WRITE_ATTR: | |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; | |
| upiu_req = (struct utp_upiu_query_v4_0 *)&request->upiu_req; | |
| put_unaligned_be64(*attr_val, &upiu_req->osf3); | |
| break; | |
| case UPIU_QUERY_OPCODE_READ_ATTR: | |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; | |
| break; | |
| default: | |
| dev_err(hba->dev, "%s: Expected query attr opcode but got = 0x%.2x\n", | |
| __func__, opcode); | |
| err = -EINVAL; | |
| goto out_unlock; | |
| } | |
| err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, dev_cmd_timeout); | |
| if (err) { | |
| dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, selector %d, err = %d\n", | |
| __func__, opcode, idn, index, sel, err); | |
| goto out_unlock; | |
| } | |
| upiu_resp = (struct utp_upiu_query_v4_0 *)response; | |
| *attr_val = get_unaligned_be64(&upiu_resp->osf3); | |
| out_unlock: | |
| ufshcd_dev_man_unlock(hba); | |
| return err; | |
| } | |
| /* | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| static int __ufshcd_query_descriptor(struct ufs_hba *hba, | |
| enum query_opcode opcode, enum desc_idn idn, u8 index, | |
| u8 selector, u8 *desc_buf, int *buf_len) | |
| { | |
| struct ufs_query_req *request = NULL; | |
| struct ufs_query_res *response = NULL; | |
| int err; | |
| BUG_ON(!hba); | |
| if (!desc_buf) { | |
| dev_err(hba->dev, "%s: descriptor buffer required for opcode 0x%x\n", | |
| __func__, opcode); | |
| return -EINVAL; | |
| } | |
| if (*buf_len < QUERY_DESC_MIN_SIZE || *buf_len > QUERY_DESC_MAX_SIZE) { | |
| dev_err(hba->dev, "%s: descriptor buffer size (%d) is out of range\n", | |
| __func__, *buf_len); | |
| return -EINVAL; | |
| } | |
| ufshcd_dev_man_lock(hba); | |
| ufshcd_init_query(hba, &request, &response, opcode, idn, index, | |
| selector); | |
| hba->dev_cmd.query.descriptor = desc_buf; | |
| request->upiu_req.length = cpu_to_be16(*buf_len); | |
| switch (opcode) { | |
| case UPIU_QUERY_OPCODE_WRITE_DESC: | |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; | |
| break; | |
| case UPIU_QUERY_OPCODE_READ_DESC: | |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; | |
| break; | |
| default: | |
| dev_err(hba->dev, | |
| "%s: Expected query descriptor opcode but got = 0x%.2x\n", | |
| __func__, opcode); | |
| err = -EINVAL; | |
| goto out_unlock; | |
| } | |
| err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, dev_cmd_timeout); | |
| if (err) { | |
| dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, err = %d\n", | |
| __func__, opcode, idn, index, err); | |
| goto out_unlock; | |
| } | |
| *buf_len = be16_to_cpu(response->upiu_res.length); | |
| out_unlock: | |
| hba->dev_cmd.query.descriptor = NULL; | |
| ufshcd_dev_man_unlock(hba); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_query_descriptor_retry - API function for sending descriptor requests | |
| * @hba: per-adapter instance | |
| * @opcode: attribute opcode | |
| * @idn: attribute idn to access | |
| * @index: index field | |
| * @selector: selector field | |
| * @desc_buf: the buffer that contains the descriptor | |
| * @buf_len: length parameter passed to the device | |
| * | |
| * The buf_len parameter will contain, on return, the length parameter | |
| * received on the response. | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| int ufshcd_query_descriptor_retry(struct ufs_hba *hba, | |
| enum query_opcode opcode, | |
| enum desc_idn idn, u8 index, | |
| u8 selector, | |
| u8 *desc_buf, int *buf_len) | |
| { | |
| int err; | |
| int retries; | |
| for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { | |
| err = __ufshcd_query_descriptor(hba, opcode, idn, index, | |
| selector, desc_buf, buf_len); | |
| if (!err || err == -EINVAL) | |
| break; | |
| } | |
| return err; | |
| } | |
| /** | |
| * ufshcd_read_desc_param - read the specified descriptor parameter | |
| * @hba: Pointer to adapter instance | |
| * @desc_id: descriptor idn value | |
| * @desc_index: descriptor index | |
| * @param_offset: offset of the parameter to read | |
| * @param_read_buf: pointer to buffer where parameter would be read | |
| * @param_size: sizeof(param_read_buf) | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| int ufshcd_read_desc_param(struct ufs_hba *hba, | |
| enum desc_idn desc_id, | |
| int desc_index, | |
| u8 param_offset, | |
| u8 *param_read_buf, | |
| u8 param_size) | |
| { | |
| int ret; | |
| u8 *desc_buf; | |
| int buff_len = QUERY_DESC_MAX_SIZE; | |
| bool is_kmalloc = true; | |
| /* Safety check */ | |
| if (desc_id >= QUERY_DESC_IDN_MAX || !param_size) | |
| return -EINVAL; | |
| /* Check whether we need temp memory */ | |
| if (param_offset != 0 || param_size < buff_len) { | |
| desc_buf = kzalloc(buff_len, GFP_KERNEL); | |
| if (!desc_buf) | |
| return -ENOMEM; | |
| } else { | |
| desc_buf = param_read_buf; | |
| is_kmalloc = false; | |
| } | |
| /* Request for full descriptor */ | |
| ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC, | |
| desc_id, desc_index, 0, | |
| desc_buf, &buff_len); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d, desc_index %d, param_offset %d, ret %d\n", | |
| __func__, desc_id, desc_index, param_offset, ret); | |
| goto out; | |
| } | |
| /* Update descriptor length */ | |
| buff_len = desc_buf[QUERY_DESC_LENGTH_OFFSET]; | |
| if (param_offset >= buff_len) { | |
| dev_err(hba->dev, "%s: Invalid offset 0x%x in descriptor IDN 0x%x, length 0x%x\n", | |
| __func__, param_offset, desc_id, buff_len); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| /* Sanity check */ | |
| if (desc_buf[QUERY_DESC_DESC_TYPE_OFFSET] != desc_id) { | |
| dev_err(hba->dev, "%s: invalid desc_id %d in descriptor header\n", | |
| __func__, desc_buf[QUERY_DESC_DESC_TYPE_OFFSET]); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (is_kmalloc) { | |
| /* Make sure we don't copy more data than available */ | |
| if (param_offset >= buff_len) | |
| ret = -EINVAL; | |
| else | |
| memcpy(param_read_buf, &desc_buf[param_offset], | |
| min_t(u32, param_size, buff_len - param_offset)); | |
| } | |
| out: | |
| if (is_kmalloc) | |
| kfree(desc_buf); | |
| return ret; | |
| } | |
| /** | |
| * struct uc_string_id - unicode string | |
| * | |
| * @len: size of this descriptor inclusive | |
| * @type: descriptor type | |
| * @uc: unicode string character | |
| */ | |
| struct uc_string_id { | |
| u8 len; | |
| u8 type; | |
| wchar_t uc[]; | |
| } __packed; | |
| /* replace non-printable or non-ASCII characters with spaces */ | |
| static inline char ufshcd_remove_non_printable(u8 ch) | |
| { | |
| return (ch >= 0x20 && ch <= 0x7e) ? ch : ' '; | |
| } | |
| /** | |
| * ufshcd_read_string_desc - read string descriptor | |
| * @hba: pointer to adapter instance | |
| * @desc_index: descriptor index | |
| * @buf: pointer to buffer where descriptor would be read, | |
| * the caller should free the memory. | |
| * @fmt: if %SD_ASCII_STD, convert from UTF-16 to ASCII | |
| * | |
| * Return: | |
| * * string size on success. | |
| * * -ENOMEM: on allocation failure | |
| * * -EINVAL: on a wrong parameter | |
| */ | |
| int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index, u8 **buf, enum ufs_descr_fmt fmt) | |
| { | |
| struct uc_string_id *uc_str; | |
| u8 *str; | |
| int ret, uc_len; | |
| if (!buf) | |
| return -EINVAL; | |
| uc_str = kzalloc(QUERY_DESC_MAX_SIZE, GFP_KERNEL); | |
| if (!uc_str) | |
| return -ENOMEM; | |
| ret = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_STRING, desc_index, 0, | |
| (u8 *)uc_str, QUERY_DESC_MAX_SIZE); | |
| if (ret < 0) { | |
| dev_err(hba->dev, "Reading String Desc failed after %d retries. err = %d\n", | |
| QUERY_REQ_RETRIES, ret); | |
| str = NULL; | |
| goto out; | |
| } | |
| if (uc_str->len <= QUERY_DESC_HDR_SIZE) { | |
| dev_dbg(hba->dev, "String Desc is of zero length\n"); | |
| str = NULL; | |
| ret = 0; | |
| goto out; | |
| } | |
| uc_len = uc_str->len - QUERY_DESC_HDR_SIZE; | |
| if (uc_len % sizeof(*uc_str->uc)) { | |
| dev_err(hba->dev, "String Desc has an odd UTF-16 payload length\n"); | |
| str = NULL; | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (fmt == SD_ASCII_STD) { | |
| ssize_t ascii_len; | |
| int i; | |
| /* Allow up to three UTF-8 bytes per UTF-16 code unit plus a NUL. */ | |
| ascii_len = uc_len / sizeof(*uc_str->uc) * 3 + 1; | |
| str = kzalloc(ascii_len, GFP_KERNEL); | |
| if (!str) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| /* | |
| * the descriptor contains string in UTF16 format | |
| * we need to convert to utf-8 so it can be displayed | |
| */ | |
| ret = utf16s_to_utf8s(uc_str->uc, | |
| uc_len / sizeof(*uc_str->uc), | |
| UTF16_BIG_ENDIAN, str, ascii_len - 1); | |
| /* replace non-printable or non-ASCII characters with spaces */ | |
| for (i = 0; i < ret; i++) | |
| str[i] = ufshcd_remove_non_printable(str[i]); | |
| str[ret++] = '\0'; | |
| } else { | |
| /* | |
| * Keep the bLength-sized raw output for the RPMB device ID ABI. | |
| * The two bytes beyond the UTF-16 payload are explicitly zeroed | |
| * instead of being read past the descriptor buffer. | |
| */ | |
| str = kzalloc(uc_str->len, GFP_KERNEL); | |
| if (!str) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| memcpy(str, uc_str->uc, uc_len); | |
| ret = uc_str->len; | |
| } | |
| out: | |
| *buf = str; | |
| kfree(uc_str); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_read_unit_desc_param - read the specified unit descriptor parameter | |
| * @hba: Pointer to adapter instance | |
| * @lun: lun id | |
| * @param_offset: offset of the parameter to read | |
| * @param_read_buf: pointer to buffer where parameter would be read | |
| * @param_size: sizeof(param_read_buf) | |
| * | |
| * Return: 0 in case of success; < 0 upon failure. | |
| */ | |
| static inline int ufshcd_read_unit_desc_param(struct ufs_hba *hba, | |
| int lun, | |
| enum unit_desc_param param_offset, | |
| u8 *param_read_buf, | |
| u32 param_size) | |
| { | |
| /* | |
| * Unit descriptors are only available for general purpose LUs (LUN id | |
| * from 0 to 7) and RPMB Well known LU. | |
| */ | |
| if (!ufs_is_valid_unit_desc_lun(&hba->dev_info, lun)) | |
| return -EOPNOTSUPP; | |
| return ufshcd_read_desc_param(hba, QUERY_DESC_IDN_UNIT, lun, | |
| param_offset, param_read_buf, param_size); | |
| } | |
| static int ufshcd_get_ref_clk_gating_wait(struct ufs_hba *hba) | |
| { | |
| int err = 0; | |
| u32 gating_wait = UFSHCD_REF_CLK_GATING_WAIT_US; | |
| if (hba->dev_info.wspecversion >= 0x300) { | |
| err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, | |
| QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME, 0, 0, | |
| &gating_wait); | |
| if (err) | |
| dev_err(hba->dev, "Failed reading bRefClkGatingWait. err = %d, use default %uus\n", | |
| err, gating_wait); | |
| if (gating_wait == 0) { | |
| gating_wait = UFSHCD_REF_CLK_GATING_WAIT_US; | |
| dev_err(hba->dev, "Undefined ref clk gating wait time, use default %uus\n", | |
| gating_wait); | |
| } | |
| hba->dev_info.clk_gating_wait_us = gating_wait; | |
| } | |
| return err; | |
| } | |
| /** | |
| * ufshcd_memory_alloc - allocate memory for host memory space data structures | |
| * @hba: per adapter instance | |
| * | |
| * 1. Allocate DMA memory for Command Descriptor array | |
| * Each command descriptor consist of Command UPIU, Response UPIU and PRDT | |
| * 2. Allocate DMA memory for UTP Transfer Request Descriptor List (UTRDL). | |
| * 3. Allocate DMA memory for UTP Task Management Request Descriptor List | |
| * (UTMRDL) | |
| * 4. Allocate memory for local reference block(lrb). | |
| * | |
| * Return: 0 for success, non-zero in case of failure. | |
| */ | |
| static int ufshcd_memory_alloc(struct ufs_hba *hba) | |
| { | |
| size_t utmrdl_size, utrdl_size, ucdl_size; | |
| /* The reserved tag uses the dedicated UCD below, not this pool. */ | |
| ucdl_size = ufshcd_get_ucd_size(hba) * (hba->nutrs - UFSHCD_NUM_RESERVED); | |
| hba->ucdl_base_addr = dmam_alloc_coherent(hba->dev, | |
| ucdl_size, | |
| &hba->ucdl_dma_addr, | |
| GFP_KERNEL); | |
| /* | |
| * UFSHCI requires UTP command descriptor to be 128 byte aligned. | |
| */ | |
| if (!hba->ucdl_base_addr || | |
| WARN_ON(hba->ucdl_dma_addr & (128 - 1))) { | |
| dev_err(hba->dev, | |
| "Command Descriptor Memory allocation failed\n"); | |
| goto out; | |
| } | |
| /* Dedicated UCD for the reserved tag; allocate once (survives MCQ re-init). */ | |
| if (!hba->devman_ucd_base_addr) { | |
| hba->devman_ucd_base_addr = | |
| dmam_alloc_coherent(hba->dev, | |
| ufshcd_get_devman_ucd_size(hba), | |
| &hba->devman_ucd_dma_addr, | |
| GFP_KERNEL); | |
| if (!hba->devman_ucd_base_addr || | |
| WARN_ON(hba->devman_ucd_dma_addr & (128 - 1))) { | |
| dev_err(hba->dev, | |
| "Devman Command Descriptor Memory allocation failed\n"); | |
| goto out; | |
| } | |
| } | |
| /* | |
| * Allocate memory for UTP Transfer descriptors | |
| * UFSHCI requires 1KB alignment of UTRD | |
| */ | |
| utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs); | |
| hba->utrdl_base_addr = dmam_alloc_coherent(hba->dev, | |
| utrdl_size, | |
| &hba->utrdl_dma_addr, | |
| GFP_KERNEL); | |
| if (!hba->utrdl_base_addr || | |
| WARN_ON(hba->utrdl_dma_addr & (SZ_1K - 1))) { | |
| dev_err(hba->dev, | |
| "Transfer Descriptor Memory allocation failed\n"); | |
| goto out; | |
| } | |
| /* | |
| * Skip utmrdl allocation; it may have been | |
| * allocated during first pass and not released during | |
| * MCQ memory allocation. | |
| * See ufshcd_release_sdb_queue() and ufshcd_config_mcq() | |
| */ | |
| if (hba->utmrdl_base_addr) | |
| goto skip_utmrdl; | |
| /* | |
| * Allocate memory for UTP Task Management descriptors | |
| * UFSHCI requires 1KB alignment of UTMRD | |
| */ | |
| utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; | |
| hba->utmrdl_base_addr = dmam_alloc_coherent(hba->dev, | |
| utmrdl_size, | |
| &hba->utmrdl_dma_addr, | |
| GFP_KERNEL); | |
| if (!hba->utmrdl_base_addr || | |
| WARN_ON(hba->utmrdl_dma_addr & (SZ_1K - 1))) { | |
| dev_err(hba->dev, | |
| "Task Management Descriptor Memory allocation failed\n"); | |
| goto out; | |
| } | |
| skip_utmrdl: | |
| return 0; | |
| out: | |
| return -ENOMEM; | |
| } | |
| /** | |
| * ufshcd_host_memory_configure - configure local reference block with | |
| * memory offsets | |
| * @hba: per adapter instance | |
| * | |
| * Configure Host memory space | |
| * 1. Update Corresponding UTRD.UCDBA and UTRD.UCDBAU with UCD DMA | |
| * address. | |
| * 2. Update each UTRD with Response UPIU offset, Response UPIU length | |
| * and PRDT offset. | |
| * 3. Save the corresponding addresses of UTRD, UCD.CMD, UCD.RSP and UCD.PRDT | |
| * into local reference block. | |
| */ | |
| static void ufshcd_host_memory_configure(struct ufs_hba *hba) | |
| { | |
| struct utp_transfer_req_desc *utrdlp; | |
| dma_addr_t cmd_desc_dma_addr; | |
| dma_addr_t cmd_desc_element_addr; | |
| u16 response_offset; | |
| u16 prdt_offset; | |
| u16 response_len; | |
| int cmd_desc_size; | |
| int i; | |
| utrdlp = hba->utrdl_base_addr; | |
| cmd_desc_size = ufshcd_get_ucd_size(hba); | |
| cmd_desc_dma_addr = hba->ucdl_dma_addr; | |
| for (i = 0; i < hba->nutrs; i++) { | |
| /* | |
| * Reserved tags (low end) use the dedicated devman UCD with a | |
| * larger response area; other tags index the pool at i - RESERVED. | |
| */ | |
| if (i < UFSHCD_NUM_RESERVED) { | |
| cmd_desc_element_addr = hba->devman_ucd_dma_addr; | |
| response_offset = offsetof(struct utp_devman_cmd_desc, | |
| response_upiu); | |
| prdt_offset = offsetof(struct utp_devman_cmd_desc, | |
| prd_table); | |
| response_len = ALIGNED_DEVMAN_RSP_SIZE; | |
| } else { | |
| cmd_desc_element_addr = cmd_desc_dma_addr + | |
| cmd_desc_size * (i - UFSHCD_NUM_RESERVED); | |
| response_offset = offsetof(struct utp_transfer_cmd_desc, | |
| response_upiu); | |
| prdt_offset = offsetof(struct utp_transfer_cmd_desc, | |
| prd_table); | |
| response_len = ALIGNED_UPIU_SIZE; | |
| } | |
| /* Configure UTRD with command descriptor base address */ | |
| utrdlp[i].command_desc_base_addr = | |
| cpu_to_le64(cmd_desc_element_addr); | |
| /* Response upiu and prdt offset should be in double words */ | |
| if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) { | |
| utrdlp[i].response_upiu_offset = | |
| cpu_to_le16(response_offset); | |
| utrdlp[i].prd_table_offset = | |
| cpu_to_le16(prdt_offset); | |
| utrdlp[i].response_upiu_length = | |
| cpu_to_le16(response_len); | |
| } else { | |
| utrdlp[i].response_upiu_offset = | |
| cpu_to_le16(response_offset >> 2); | |
| utrdlp[i].prd_table_offset = | |
| cpu_to_le16(prdt_offset >> 2); | |
| utrdlp[i].response_upiu_length = | |
| cpu_to_le16(response_len >> 2); | |
| } | |
| } | |
| } | |
| /** | |
| * ufshcd_dme_link_startup - Notify Unipro to perform link startup | |
| * @hba: per adapter instance | |
| * | |
| * UIC_CMD_DME_LINK_STARTUP command must be issued to Unipro layer, | |
| * in order to initialize the Unipro link startup procedure. | |
| * Once the Unipro links are up, the device connected to the controller | |
| * is detected. | |
| * | |
| * Return: 0 on success, non-zero value on failure. | |
| */ | |
| static int ufshcd_dme_link_startup(struct ufs_hba *hba) | |
| { | |
| struct uic_command uic_cmd = { | |
| .command = UIC_CMD_DME_LINK_STARTUP, | |
| }; | |
| int ret; | |
| ret = ufshcd_send_uic_cmd(hba, &uic_cmd); | |
| if (ret) | |
| dev_dbg(hba->dev, | |
| "dme-link-startup: error code %d\n", ret); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_dme_reset - UIC command for DME_RESET | |
| * @hba: per adapter instance | |
| * | |
| * DME_RESET command is issued in order to reset UniPro stack. | |
| * This function now deals with cold reset. | |
| * | |
| * Return: 0 on success, non-zero value on failure. | |
| */ | |
| int ufshcd_dme_reset(struct ufs_hba *hba) | |
| { | |
| struct uic_command uic_cmd = { | |
| .command = UIC_CMD_DME_RESET, | |
| }; | |
| int ret; | |
| ret = ufshcd_send_uic_cmd(hba, &uic_cmd); | |
| if (ret) | |
| dev_err(hba->dev, | |
| "dme-reset: error code %d\n", ret); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_dme_reset); | |
| int ufshcd_dme_configure_adapt(struct ufs_hba *hba, | |
| int agreed_gear, | |
| int adapt_val) | |
| { | |
| int ret; | |
| if (agreed_gear < UFS_HS_G4) | |
| adapt_val = PA_NO_ADAPT; | |
| ret = ufshcd_dme_set(hba, | |
| UIC_ARG_MIB(PA_TXHSADAPTTYPE), | |
| adapt_val); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_dme_configure_adapt); | |
| /** | |
| * ufshcd_dme_enable - UIC command for DME_ENABLE | |
| * @hba: per adapter instance | |
| * | |
| * DME_ENABLE command is issued in order to enable UniPro stack. | |
| * | |
| * Return: 0 on success, non-zero value on failure. | |
| */ | |
| int ufshcd_dme_enable(struct ufs_hba *hba) | |
| { | |
| struct uic_command uic_cmd = { | |
| .command = UIC_CMD_DME_ENABLE, | |
| }; | |
| int ret; | |
| ret = ufshcd_send_uic_cmd(hba, &uic_cmd); | |
| if (ret) | |
| dev_err(hba->dev, | |
| "dme-enable: error code %d\n", ret); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_dme_enable); | |
| static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba) | |
| { | |
| #define MIN_DELAY_BEFORE_DME_CMDS_US 1000 | |
| unsigned long min_sleep_time_us; | |
| if (!(hba->quirks & UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS)) | |
| return; | |
| /* | |
| * last_dme_cmd_tstamp will be 0 only for 1st call to | |
| * this function | |
| */ | |
| if (unlikely(!ktime_to_us(hba->last_dme_cmd_tstamp))) { | |
| min_sleep_time_us = MIN_DELAY_BEFORE_DME_CMDS_US; | |
| } else { | |
| unsigned long delta = | |
| (unsigned long) ktime_to_us( | |
| ktime_sub(ktime_get(), | |
| hba->last_dme_cmd_tstamp)); | |
| if (delta < MIN_DELAY_BEFORE_DME_CMDS_US) | |
| min_sleep_time_us = | |
| MIN_DELAY_BEFORE_DME_CMDS_US - delta; | |
| else | |
| min_sleep_time_us = 0; /* no more delay required */ | |
| } | |
| if (min_sleep_time_us > 0) { | |
| /* allow sleep for extra 50us if needed */ | |
| usleep_range(min_sleep_time_us, min_sleep_time_us + 50); | |
| } | |
| /* update the last_dme_cmd_tstamp */ | |
| hba->last_dme_cmd_tstamp = ktime_get(); | |
| } | |
| /** | |
| * ufshcd_dme_set_attr - UIC command for DME_SET, DME_PEER_SET | |
| * @hba: per adapter instance | |
| * @attr_sel: uic command argument1 | |
| * @attr_set: attribute set type as uic command argument2 | |
| * @mib_val: setting value as uic command argument3 | |
| * @peer: indicate whether peer or local | |
| * | |
| * Return: 0 on success, non-zero value on failure. | |
| */ | |
| int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, | |
| u8 attr_set, u32 mib_val, u8 peer) | |
| { | |
| struct uic_command uic_cmd = { | |
| .command = peer ? UIC_CMD_DME_PEER_SET : UIC_CMD_DME_SET, | |
| .argument1 = attr_sel, | |
| .argument2 = UIC_ARG_ATTR_TYPE(attr_set), | |
| .argument3 = mib_val, | |
| }; | |
| static const char *const action[] = { | |
| "dme-set", | |
| "dme-peer-set" | |
| }; | |
| const char *set = action[!!peer]; | |
| int ret; | |
| int retries = UFS_UIC_COMMAND_RETRIES; | |
| do { | |
| /* for peer attributes we retry upon failure */ | |
| ret = ufshcd_send_uic_cmd(hba, &uic_cmd); | |
| if (ret) | |
| dev_dbg(hba->dev, "%s: attr-id 0x%x val 0x%x error code %d\n", | |
| set, UIC_GET_ATTR_ID(attr_sel), mib_val, ret); | |
| } while (ret && peer && --retries); | |
| if (ret) | |
| dev_err(hba->dev, "%s: attr-id 0x%x val 0x%x failed %d retries\n", | |
| set, UIC_GET_ATTR_ID(attr_sel), mib_val, | |
| UFS_UIC_COMMAND_RETRIES - retries); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_dme_set_attr); | |
| /** | |
| * ufshcd_dme_get_attr - UIC command for DME_GET, DME_PEER_GET | |
| * @hba: per adapter instance | |
| * @attr_sel: uic command argument1 | |
| * @mib_val: the value of the attribute as returned by the UIC command | |
| * @peer: indicate whether peer or local | |
| * | |
| * Return: 0 on success, non-zero value on failure. | |
| */ | |
| int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, | |
| u32 *mib_val, u8 peer) | |
| { | |
| struct uic_command uic_cmd = { | |
| .command = peer ? UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET, | |
| .argument1 = attr_sel, | |
| }; | |
| static const char *const action[] = { | |
| "dme-get", | |
| "dme-peer-get" | |
| }; | |
| const char *get = action[!!peer]; | |
| int ret; | |
| int retries = UFS_UIC_COMMAND_RETRIES; | |
| struct ufs_pa_layer_attr orig_pwr_info; | |
| struct ufs_pa_layer_attr temp_pwr_info; | |
| bool pwr_mode_change = false; | |
| if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)) { | |
| orig_pwr_info = hba->pwr_info; | |
| temp_pwr_info = orig_pwr_info; | |
| if (orig_pwr_info.pwr_tx == FAST_MODE || | |
| orig_pwr_info.pwr_rx == FAST_MODE) { | |
| temp_pwr_info.pwr_tx = FASTAUTO_MODE; | |
| temp_pwr_info.pwr_rx = FASTAUTO_MODE; | |
| pwr_mode_change = true; | |
| } else if (orig_pwr_info.pwr_tx == SLOW_MODE || | |
| orig_pwr_info.pwr_rx == SLOW_MODE) { | |
| temp_pwr_info.pwr_tx = SLOWAUTO_MODE; | |
| temp_pwr_info.pwr_rx = SLOWAUTO_MODE; | |
| pwr_mode_change = true; | |
| } | |
| if (pwr_mode_change) { | |
| ret = ufshcd_change_power_mode(hba, &temp_pwr_info, | |
| UFSHCD_PMC_POLICY_DONT_FORCE); | |
| if (ret) | |
| goto out; | |
| } | |
| } | |
| do { | |
| /* for peer attributes we retry upon failure */ | |
| ret = ufshcd_send_uic_cmd(hba, &uic_cmd); | |
| if (ret) | |
| dev_dbg(hba->dev, "%s: attr-id 0x%x error code %d\n", | |
| get, UIC_GET_ATTR_ID(attr_sel), ret); | |
| } while (ret && peer && --retries); | |
| if (ret) | |
| dev_err(hba->dev, "%s: attr-id 0x%x failed %d retries\n", | |
| get, UIC_GET_ATTR_ID(attr_sel), | |
| UFS_UIC_COMMAND_RETRIES - retries); | |
| if (mib_val) | |
| *mib_val = ret == 0 ? uic_cmd.argument3 : 0; | |
| if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE) | |
| && pwr_mode_change) | |
| ufshcd_change_power_mode(hba, &orig_pwr_info, | |
| UFSHCD_PMC_POLICY_DONT_FORCE); | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr); | |
| /** | |
| * ufshcd_dme_rmw - get modify set a DME attribute | |
| * @hba: per adapter instance | |
| * @mask: indicates which bits to clear from the value that has been read | |
| * @val: actual value to write | |
| * @attr: dme attribute | |
| */ | |
| int ufshcd_dme_rmw(struct ufs_hba *hba, u32 mask, | |
| u32 val, u32 attr) | |
| { | |
| u32 cfg = 0; | |
| int err; | |
| err = ufshcd_dme_get(hba, UIC_ARG_MIB(attr), &cfg); | |
| if (err) | |
| return err; | |
| cfg &= ~mask; | |
| cfg |= (val & mask); | |
| return ufshcd_dme_set(hba, UIC_ARG_MIB(attr), cfg); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_dme_rmw); | |
| /** | |
| * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power | |
| * state) and waits for it to take effect. | |
| * | |
| * @hba: per adapter instance | |
| * @cmd: UIC command to execute | |
| * | |
| * DME operations like DME_SET(PA_PWRMODE), DME_HIBERNATE_ENTER & | |
| * DME_HIBERNATE_EXIT commands take some time to take its effect on both host | |
| * and device UniPro link and hence it's final completion would be indicated by | |
| * dedicated status bits in Interrupt Status register (UPMS, UHES, UHXS) in | |
| * addition to normal UIC command completion Status (UCCS). This function only | |
| * returns after the relevant status bits indicate the completion. | |
| * | |
| * Return: 0 on success, non-zero value on failure. | |
| */ | |
| static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) | |
| { | |
| DECLARE_COMPLETION_ONSTACK(uic_async_done); | |
| unsigned long flags; | |
| u8 status; | |
| int ret; | |
| mutex_lock(&hba->uic_cmd_mutex); | |
| ufshcd_add_delay_before_dme_cmd(hba); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (ufshcd_is_link_broken(hba)) { | |
| ret = -ENOLINK; | |
| goto out_unlock; | |
| } | |
| hba->uic_async_done = &uic_async_done; | |
| ufshcd_disable_intr(hba, UIC_COMMAND_COMPL); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| ret = __ufshcd_send_uic_cmd(hba, cmd); | |
| if (ret) { | |
| dev_err(hba->dev, | |
| "pwr ctrl cmd 0x%x with (MIBattribute 0x%x, mode 0x%x) uic error %d\n", | |
| cmd->command, UIC_GET_ATTR_ID(cmd->argument1), | |
| cmd->argument3, ret); | |
| goto out; | |
| } | |
| if (!wait_for_completion_timeout(hba->uic_async_done, | |
| msecs_to_jiffies(uic_cmd_timeout))) { | |
| dev_err(hba->dev, | |
| "pwr ctrl cmd 0x%x with (MIBattribute 0x%x, mode 0x%x) completion timeout\n", | |
| cmd->command, UIC_GET_ATTR_ID(cmd->argument1), | |
| cmd->argument3); | |
| if (!cmd->cmd_active) { | |
| dev_err(hba->dev, "%s: Power Mode Change operation has been completed, go check UPMCRS\n", | |
| __func__); | |
| goto check_upmcrs; | |
| } | |
| ret = -ETIMEDOUT; | |
| goto out; | |
| } | |
| check_upmcrs: | |
| status = ufshcd_get_upmcrs(hba); | |
| if (status != PWR_LOCAL) { | |
| dev_err(hba->dev, | |
| "pwr ctrl cmd 0x%x with (MIBattribute 0x%x, mode 0x%x) failed, host upmcrs:0x%x\n", | |
| cmd->command, UIC_GET_ATTR_ID(cmd->argument1), | |
| cmd->argument3, status); | |
| ret = (status != PWR_OK) ? status : -1; | |
| } | |
| out: | |
| if (ret) { | |
| ufshcd_print_host_state(hba); | |
| ufshcd_print_pwr_info(hba); | |
| ufshcd_print_tx_eq_params(hba); | |
| ufshcd_print_evt_hist(hba); | |
| } | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| hba->active_uic_cmd = NULL; | |
| hba->uic_async_done = NULL; | |
| if (ret && !hba->pm_op_in_progress) { | |
| ufshcd_set_link_broken(hba); | |
| ufshcd_schedule_eh_work(hba); | |
| } | |
| out_unlock: | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| mutex_unlock(&hba->uic_cmd_mutex); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_uic_tx_eqtr - Perform UIC TX Equalization Training | |
| * @hba: per adapter instance | |
| * @gear: target gear for EQTR | |
| * | |
| * Returns 0 on success, negative error code otherwise | |
| */ | |
| int ufshcd_uic_tx_eqtr(struct ufs_hba *hba, int gear) | |
| { | |
| struct uic_command uic_cmd = { | |
| .command = UIC_CMD_DME_SET, | |
| .argument1 = UIC_ARG_MIB(PA_EQTR_GEAR), | |
| .argument3 = gear, | |
| }; | |
| int ret; | |
| ufshcd_hold(hba); | |
| ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); | |
| ufshcd_release(hba); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_send_bsg_uic_cmd - Send UIC commands requested via BSG layer and retrieve the result | |
| * @hba: per adapter instance | |
| * @uic_cmd: UIC command | |
| * | |
| * Return: 0 only if success. | |
| */ | |
| int ufshcd_send_bsg_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) | |
| { | |
| int ret; | |
| if (uic_cmd->argument1 != UIC_ARG_MIB(PA_PWRMODE) || | |
| uic_cmd->command != UIC_CMD_DME_SET) | |
| return ufshcd_send_uic_cmd(hba, uic_cmd); | |
| if (hba->quirks & UFSHCD_QUIRK_BROKEN_UIC_CMD) | |
| return 0; | |
| ufshcd_hold(hba); | |
| ret = ufshcd_uic_pwr_ctrl(hba, uic_cmd); | |
| ufshcd_release(hba); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage | |
| * using DME_SET primitives. | |
| * @hba: per adapter instance | |
| * @mode: powr mode value | |
| * | |
| * Return: 0 on success, non-zero value on failure. | |
| */ | |
| int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode) | |
| { | |
| struct uic_command uic_cmd = { | |
| .command = UIC_CMD_DME_SET, | |
| .argument1 = UIC_ARG_MIB(PA_PWRMODE), | |
| .argument3 = mode, | |
| }; | |
| int ret; | |
| if (hba->quirks & UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP) { | |
| ret = ufshcd_dme_set(hba, | |
| UIC_ARG_MIB_SEL(PA_RXHSUNTERMCAP, 0), 1); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: failed to enable PA_RXHSUNTERMCAP ret %d\n", | |
| __func__, ret); | |
| goto out; | |
| } | |
| } | |
| ufshcd_hold(hba); | |
| ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); | |
| ufshcd_release(hba); | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_uic_change_pwr_mode); | |
| int ufshcd_link_recovery(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| unsigned long flags; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| hba->ufshcd_state = UFSHCD_STATE_RESET; | |
| ufshcd_set_eh_in_progress(hba); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| /* Reset the attached device */ | |
| ufshcd_device_reset(hba); | |
| ret = ufshcd_host_reset_and_restore(hba); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (ret) | |
| hba->ufshcd_state = UFSHCD_STATE_ERROR; | |
| ufshcd_clear_eh_in_progress(hba); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| if (ret) | |
| dev_err(hba->dev, "%s: link recovery failed, err %d", | |
| __func__, ret); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_link_recovery); | |
| int ufshcd_uic_hibern8_enter(struct ufs_hba *hba) | |
| { | |
| struct uic_command uic_cmd = { | |
| .command = UIC_CMD_DME_HIBER_ENTER, | |
| }; | |
| ktime_t start = ktime_get(); | |
| int ret; | |
| ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_ENTER, PRE_CHANGE); | |
| ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); | |
| trace_ufshcd_profile_hibern8(hba, "enter", | |
| ktime_to_us(ktime_sub(ktime_get(), start)), ret); | |
| if (ret) | |
| dev_err(hba->dev, "%s: hibern8 enter failed. ret = %d\n", | |
| __func__, ret); | |
| else | |
| ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_ENTER, | |
| POST_CHANGE); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_uic_hibern8_enter); | |
| int ufshcd_uic_hibern8_exit(struct ufs_hba *hba) | |
| { | |
| struct uic_command uic_cmd = { | |
| .command = UIC_CMD_DME_HIBER_EXIT, | |
| }; | |
| int ret; | |
| ktime_t start = ktime_get(); | |
| ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_EXIT, PRE_CHANGE); | |
| ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); | |
| trace_ufshcd_profile_hibern8(hba, "exit", | |
| ktime_to_us(ktime_sub(ktime_get(), start)), ret); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: hibern8 exit failed. ret = %d\n", | |
| __func__, ret); | |
| } else { | |
| ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_EXIT, | |
| POST_CHANGE); | |
| hba->ufs_stats.last_hibern8_exit_tstamp = local_clock(); | |
| hba->ufs_stats.hibern8_exit_cnt++; | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_uic_hibern8_exit); | |
| static void ufshcd_configure_auto_hibern8(struct ufs_hba *hba) | |
| { | |
| if (!ufshcd_is_auto_hibern8_supported(hba)) | |
| return; | |
| ufshcd_writel(hba, hba->ahit, REG_AUTO_HIBERNATE_IDLE_TIMER); | |
| } | |
| void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit) | |
| { | |
| const u32 cur_ahit = READ_ONCE(hba->ahit); | |
| if (!ufshcd_is_auto_hibern8_supported(hba) || cur_ahit == ahit) | |
| return; | |
| WRITE_ONCE(hba->ahit, ahit); | |
| if (!pm_runtime_suspended(&hba->ufs_device_wlun->sdev_gendev)) { | |
| ufshcd_rpm_get_sync(hba); | |
| ufshcd_hold(hba); | |
| ufshcd_configure_auto_hibern8(hba); | |
| ufshcd_release(hba); | |
| ufshcd_rpm_put_sync(hba); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_auto_hibern8_update); | |
| /** | |
| * ufshcd_init_pwr_info - setting the POR (power on reset) | |
| * values in hba power info | |
| * @hba: per-adapter instance | |
| */ | |
| static void ufshcd_init_pwr_info(struct ufs_hba *hba) | |
| { | |
| hba->pwr_info.gear_rx = UFS_PWM_G1; | |
| hba->pwr_info.gear_tx = UFS_PWM_G1; | |
| hba->pwr_info.lane_rx = UFS_LANE_1; | |
| hba->pwr_info.lane_tx = UFS_LANE_1; | |
| hba->pwr_info.pwr_rx = SLOWAUTO_MODE; | |
| hba->pwr_info.pwr_tx = SLOWAUTO_MODE; | |
| hba->pwr_info.hs_rate = 0; | |
| } | |
| /** | |
| * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device | |
| * @hba: per-adapter instance | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba) | |
| { | |
| struct ufs_pa_layer_attr *pwr_info = &hba->max_pwr_info.info; | |
| if (hba->max_pwr_info.is_valid) | |
| return 0; | |
| if (hba->quirks & UFSHCD_QUIRK_HIBERN_FASTAUTO) { | |
| pwr_info->pwr_tx = FASTAUTO_MODE; | |
| pwr_info->pwr_rx = FASTAUTO_MODE; | |
| } else { | |
| pwr_info->pwr_tx = FAST_MODE; | |
| pwr_info->pwr_rx = FAST_MODE; | |
| } | |
| pwr_info->hs_rate = PA_HS_MODE_B; | |
| /* Get the connected lane count */ | |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), | |
| &pwr_info->lane_rx); | |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), | |
| &pwr_info->lane_tx); | |
| if (!pwr_info->lane_rx || !pwr_info->lane_tx || | |
| pwr_info->lane_rx > UFS_MAX_LANES || | |
| pwr_info->lane_tx > UFS_MAX_LANES) { | |
| dev_err(hba->dev, "%s: invalid connected lanes value. rx=%d, tx=%d\n", | |
| __func__, | |
| pwr_info->lane_rx, | |
| pwr_info->lane_tx); | |
| return -EINVAL; | |
| } | |
| if (pwr_info->lane_rx != pwr_info->lane_tx) { | |
| dev_err(hba->dev, "%s: asymmetric connected lanes. rx=%d, tx=%d\n", | |
| __func__, | |
| pwr_info->lane_rx, | |
| pwr_info->lane_tx); | |
| return -EINVAL; | |
| } | |
| /* | |
| * First, get the maximum gears of HS speed. | |
| * If a zero value, it means there is no HSGEAR capability. | |
| * Then, get the maximum gears of PWM speed. | |
| */ | |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &pwr_info->gear_rx); | |
| if (!pwr_info->gear_rx) { | |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), | |
| &pwr_info->gear_rx); | |
| if (!pwr_info->gear_rx) { | |
| dev_err(hba->dev, "%s: invalid max pwm rx gear read = %d\n", | |
| __func__, pwr_info->gear_rx); | |
| return -EINVAL; | |
| } | |
| pwr_info->pwr_rx = SLOW_MODE; | |
| } | |
| ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), | |
| &pwr_info->gear_tx); | |
| if (!pwr_info->gear_tx) { | |
| ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), | |
| &pwr_info->gear_tx); | |
| if (!pwr_info->gear_tx) { | |
| dev_err(hba->dev, "%s: invalid max pwm tx gear read = %d\n", | |
| __func__, pwr_info->gear_tx); | |
| return -EINVAL; | |
| } | |
| pwr_info->pwr_tx = SLOW_MODE; | |
| } | |
| hba->max_pwr_info.is_valid = true; | |
| return 0; | |
| } | |
| /** | |
| * ufshcd_dme_change_power_mode() - UniPro DME Power Mode change sequence | |
| * @hba: per-adapter instance | |
| * @pwr_mode: pointer to the target power mode (gear/lane) attributes | |
| * @pmc_policy: Power Mode change policy | |
| * | |
| * This function handles the low-level DME (Device Management Entity) | |
| * configuration required to transition the UFS link to a new power mode. It | |
| * performs the following steps: | |
| * 1. Checks if the requested mode matches the current state. | |
| * 2. Sets M-PHY and UniPro attributes including Gear (PA_RXGEAR/TXGEAR), | |
| * Lanes, Termination, and HS Series (PA_HSSERIES). | |
| * 3. Configures default UniPro timeout values (DL_FC0, etc.) unless | |
| * explicitly skipped via quirks. | |
| * 4. Triggers the actual hardware mode change via ufshcd_uic_change_pwr_mode(). | |
| * 5. Updates the HBA's cached power information on success. | |
| * | |
| * Return: 0 on success, non-zero error code on failure. | |
| */ | |
| static int ufshcd_dme_change_power_mode(struct ufs_hba *hba, | |
| struct ufs_pa_layer_attr *pwr_mode, | |
| enum ufshcd_pmc_policy pmc_policy) | |
| { | |
| int ret; | |
| /* if already configured to the requested pwr_mode */ | |
| if (pmc_policy == UFSHCD_PMC_POLICY_DONT_FORCE && | |
| pwr_mode->gear_rx == hba->pwr_info.gear_rx && | |
| pwr_mode->gear_tx == hba->pwr_info.gear_tx && | |
| pwr_mode->lane_rx == hba->pwr_info.lane_rx && | |
| pwr_mode->lane_tx == hba->pwr_info.lane_tx && | |
| pwr_mode->pwr_rx == hba->pwr_info.pwr_rx && | |
| pwr_mode->pwr_tx == hba->pwr_info.pwr_tx && | |
| pwr_mode->hs_rate == hba->pwr_info.hs_rate) { | |
| dev_dbg(hba->dev, "%s: power already configured\n", __func__); | |
| return 0; | |
| } | |
| /* | |
| * Configure attributes for power mode change with below. | |
| * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION, | |
| * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION, | |
| * - PA_HSSERIES | |
| */ | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), pwr_mode->gear_rx); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), | |
| pwr_mode->lane_rx); | |
| if (pwr_mode->pwr_rx == FASTAUTO_MODE || | |
| pwr_mode->pwr_rx == FAST_MODE) | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), true); | |
| else | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), false); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), | |
| pwr_mode->lane_tx); | |
| if (pwr_mode->pwr_tx == FASTAUTO_MODE || | |
| pwr_mode->pwr_tx == FAST_MODE) | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), true); | |
| else | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), false); | |
| if (pwr_mode->pwr_rx == FASTAUTO_MODE || | |
| pwr_mode->pwr_tx == FASTAUTO_MODE || | |
| pwr_mode->pwr_rx == FAST_MODE || | |
| pwr_mode->pwr_tx == FAST_MODE) | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), | |
| pwr_mode->hs_rate); | |
| if (!(hba->quirks & UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING)) { | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA0), | |
| DL_FC0ProtectionTimeOutVal_Default); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA1), | |
| DL_TC0ReplayTimeOutVal_Default); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA2), | |
| DL_AFC0ReqTimeOutVal_Default); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA3), | |
| DL_FC1ProtectionTimeOutVal_Default); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA4), | |
| DL_TC1ReplayTimeOutVal_Default); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA5), | |
| DL_AFC1ReqTimeOutVal_Default); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalFC0ProtectionTimeOutVal), | |
| DL_FC0ProtectionTimeOutVal_Default); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalTC0ReplayTimeOutVal), | |
| DL_TC0ReplayTimeOutVal_Default); | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalAFC0ReqTimeOutVal), | |
| DL_AFC0ReqTimeOutVal_Default); | |
| } | |
| ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4 | |
| | pwr_mode->pwr_tx); | |
| if (ret) { | |
| dev_err(hba->dev, | |
| "%s: power mode change failed %d\n", __func__, ret); | |
| } else { | |
| memcpy(&hba->pwr_info, pwr_mode, | |
| sizeof(struct ufs_pa_layer_attr)); | |
| } | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_change_power_mode() - Change UFS Link Power Mode | |
| * @hba: per-adapter instance | |
| * @pwr_mode: pointer to the target power mode (gear/lane) attributes | |
| * @pmc_policy: Power Mode change policy | |
| * | |
| * This function handles the high-level sequence for changing the UFS link | |
| * power mode. It triggers vendor-specific pre-change notification, | |
| * executes the DME (Device Management Entity) power mode change sequence, | |
| * and, upon success, triggers vendor-specific post-change notification. | |
| * | |
| * Return: 0 on success, non-zero error code on failure. | |
| */ | |
| int ufshcd_change_power_mode(struct ufs_hba *hba, | |
| struct ufs_pa_layer_attr *pwr_mode, | |
| enum ufshcd_pmc_policy pmc_policy) | |
| { | |
| int ret; | |
| ufshcd_vops_pwr_change_notify(hba, PRE_CHANGE, pwr_mode); | |
| ret = ufshcd_dme_change_power_mode(hba, pwr_mode, pmc_policy); | |
| if (!ret) | |
| ufshcd_vops_pwr_change_notify(hba, POST_CHANGE, pwr_mode); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_change_power_mode); | |
| /** | |
| * ufshcd_config_pwr_mode - configure a new power mode | |
| * @hba: per-adapter instance | |
| * @desired_pwr_mode: desired power configuration | |
| * @pmc_policy: Power Mode change policy | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| int ufshcd_config_pwr_mode(struct ufs_hba *hba, | |
| struct ufs_pa_layer_attr *desired_pwr_mode, | |
| enum ufshcd_pmc_policy pmc_policy) | |
| { | |
| struct ufs_pa_layer_attr final_params = { 0 }; | |
| int ret; | |
| ret = ufshcd_vops_negotiate_pwr_mode(hba, desired_pwr_mode, | |
| &final_params); | |
| if (ret) { | |
| if (ret != -ENOTSUPP) | |
| dev_err(hba->dev, "Failed to negotiate power mode: %d, use desired as is\n", | |
| ret); | |
| memcpy(&final_params, desired_pwr_mode, sizeof(final_params)); | |
| } | |
| ret = ufshcd_config_tx_eq_settings(hba, &final_params, false); | |
| if (ret) | |
| dev_warn(hba->dev, "Failed to configure TX Equalization for HS-G%u, Rate-%s: %d\n", | |
| final_params.gear_tx, | |
| ufs_hs_rate_to_str(final_params.hs_rate), ret); | |
| return ufshcd_change_power_mode(hba, &final_params, pmc_policy); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_config_pwr_mode); | |
| /** | |
| * ufshcd_complete_dev_init() - checks device readiness | |
| * @hba: per-adapter instance | |
| * | |
| * Set fDeviceInit flag and poll until device toggles it. | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| static int ufshcd_complete_dev_init(struct ufs_hba *hba) | |
| { | |
| int err; | |
| bool flag_res = true; | |
| ktime_t timeout; | |
| err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG, | |
| QUERY_FLAG_IDN_FDEVICEINIT, 0, NULL); | |
| if (err) { | |
| dev_err(hba->dev, | |
| "%s: setting fDeviceInit flag failed with error %d\n", | |
| __func__, err); | |
| goto out; | |
| } | |
| /* Poll fDeviceInit flag to be cleared */ | |
| timeout = ktime_add_ms(ktime_get(), FDEVICEINIT_COMPL_TIMEOUT); | |
| do { | |
| err = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, | |
| QUERY_FLAG_IDN_FDEVICEINIT, 0, &flag_res); | |
| if (!flag_res) | |
| break; | |
| usleep_range(500, 1000); | |
| } while (ktime_before(ktime_get(), timeout)); | |
| if (err) { | |
| dev_err(hba->dev, | |
| "%s: reading fDeviceInit flag failed with error %d\n", | |
| __func__, err); | |
| } else if (flag_res) { | |
| dev_err(hba->dev, | |
| "%s: fDeviceInit was not cleared by the device\n", | |
| __func__); | |
| err = -EBUSY; | |
| } | |
| out: | |
| return err; | |
| } | |
| /** | |
| * ufshcd_make_hba_operational - Make UFS controller operational | |
| * @hba: per adapter instance | |
| * | |
| * To bring UFS host controller to operational state, | |
| * 1. Enable required interrupts | |
| * 2. Configure interrupt aggregation | |
| * 3. Program UTRL and UTMRL base address | |
| * 4. Configure run-stop-registers | |
| * | |
| * Return: 0 if successful; < 0 upon failure. | |
| */ | |
| int ufshcd_make_hba_operational(struct ufs_hba *hba) | |
| { | |
| int err = 0; | |
| u32 reg; | |
| /* Enable required interrupts */ | |
| ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS); | |
| /* Configure interrupt aggregation */ | |
| if (ufshcd_is_intr_aggr_allowed(hba)) | |
| ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO); | |
| else | |
| ufshcd_disable_intr_aggr(hba); | |
| /* Configure UTRL and UTMRL base address registers */ | |
| ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr), | |
| REG_UTP_TRANSFER_REQ_LIST_BASE_L); | |
| ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr), | |
| REG_UTP_TRANSFER_REQ_LIST_BASE_H); | |
| ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr), | |
| REG_UTP_TASK_REQ_LIST_BASE_L); | |
| ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr), | |
| REG_UTP_TASK_REQ_LIST_BASE_H); | |
| /* | |
| * UCRDY, UTMRLDY and UTRLRDY bits must be 1 | |
| */ | |
| reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS); | |
| if (!(ufshcd_get_lists_status(reg))) { | |
| ufshcd_enable_run_stop_reg(hba); | |
| } else { | |
| dev_err(hba->dev, | |
| "Host controller not ready to process requests"); | |
| err = -EIO; | |
| } | |
| return err; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_make_hba_operational); | |
| /** | |
| * ufshcd_hba_stop - Send controller to reset state | |
| * @hba: per adapter instance | |
| */ | |
| void ufshcd_hba_stop(struct ufs_hba *hba) | |
| { | |
| int err; | |
| ufshcd_disable_irq(hba); | |
| ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE); | |
| err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE, | |
| CONTROLLER_ENABLE, CONTROLLER_DISABLE, | |
| 10, 1); | |
| ufshcd_enable_irq(hba); | |
| if (err) | |
| dev_err(hba->dev, "%s: Controller disable failed\n", __func__); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_hba_stop); | |
| /** | |
| * ufshcd_hba_execute_hce - initialize the controller | |
| * @hba: per adapter instance | |
| * | |
| * The controller resets itself and controller firmware initialization | |
| * sequence kicks off. When controller is ready it will set | |
| * the Host Controller Enable bit to 1. | |
| * | |
| * Return: 0 on success, non-zero value on failure. | |
| */ | |
| static int ufshcd_hba_execute_hce(struct ufs_hba *hba) | |
| { | |
| int retry; | |
| for (retry = 3; retry > 0; retry--) { | |
| if (ufshcd_is_hba_active(hba)) | |
| /* change controller state to "reset state" */ | |
| ufshcd_hba_stop(hba); | |
| /* UniPro link is disabled at this point */ | |
| ufshcd_set_link_off(hba); | |
| ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE); | |
| /* start controller initialization sequence */ | |
| ufshcd_hba_start(hba); | |
| /* | |
| * To initialize a UFS host controller HCE bit must be set to 1. | |
| * During initialization the HCE bit value changes from 1->0->1. | |
| * When the host controller completes initialization sequence | |
| * it sets the value of HCE bit to 1. The same HCE bit is read back | |
| * to check if the controller has completed initialization sequence. | |
| * So without this delay the value HCE = 1, set in the previous | |
| * instruction might be read back. | |
| * This delay can be changed based on the controller. | |
| */ | |
| ufshcd_delay_us(hba->vps->hba_enable_delay_us, 100); | |
| /* wait for the host controller to complete initialization */ | |
| if (!ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE, CONTROLLER_ENABLE, | |
| CONTROLLER_ENABLE, 1000, 50)) | |
| break; | |
| dev_err(hba->dev, "Enabling the controller failed\n"); | |
| } | |
| if (!retry) | |
| return -EIO; | |
| /* enable UIC related interrupts */ | |
| ufshcd_enable_intr(hba, UFSHCD_UIC_MASK); | |
| ufshcd_vops_hce_enable_notify(hba, POST_CHANGE); | |
| return 0; | |
| } | |
| int ufshcd_hba_enable(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| if (hba->quirks & UFSHCI_QUIRK_BROKEN_HCE) { | |
| ufshcd_set_link_off(hba); | |
| ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE); | |
| /* enable UIC related interrupts */ | |
| ufshcd_enable_intr(hba, UFSHCD_UIC_MASK); | |
| ret = ufshcd_dme_reset(hba); | |
| if (ret) { | |
| dev_err(hba->dev, "DME_RESET failed\n"); | |
| return ret; | |
| } | |
| ret = ufshcd_dme_enable(hba); | |
| if (ret) { | |
| dev_err(hba->dev, "Enabling DME failed\n"); | |
| return ret; | |
| } | |
| ufshcd_vops_hce_enable_notify(hba, POST_CHANGE); | |
| } else { | |
| ret = ufshcd_hba_execute_hce(hba); | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_hba_enable); | |
| static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer) | |
| { | |
| int tx_lanes, i, err = 0; | |
| if (!peer) | |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), | |
| &tx_lanes); | |
| else | |
| ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), | |
| &tx_lanes); | |
| for (i = 0; i < tx_lanes; i++) { | |
| if (!peer) | |
| err = ufshcd_dme_set(hba, | |
| UIC_ARG_MIB_SEL(TX_LCC_ENABLE, | |
| UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), | |
| 0); | |
| else | |
| err = ufshcd_dme_peer_set(hba, | |
| UIC_ARG_MIB_SEL(TX_LCC_ENABLE, | |
| UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), | |
| 0); | |
| if (err) { | |
| dev_err(hba->dev, "%s: TX LCC Disable failed, peer = %d, lane = %d, err = %d", | |
| __func__, peer, i, err); | |
| break; | |
| } | |
| } | |
| return err; | |
| } | |
| static inline int ufshcd_disable_device_tx_lcc(struct ufs_hba *hba) | |
| { | |
| return ufshcd_disable_tx_lcc(hba, true); | |
| } | |
| void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val) | |
| { | |
| struct ufs_event_hist *e; | |
| if (id >= UFS_EVT_CNT) | |
| return; | |
| e = &hba->ufs_stats.event[id]; | |
| e->val[e->pos] = val; | |
| e->tstamp[e->pos] = local_clock(); | |
| e->cnt += 1; | |
| e->pos = (e->pos + 1) % UFS_EVENT_HIST_LENGTH; | |
| ufshcd_vops_event_notify(hba, id, &val); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_update_evt_hist); | |
| static int ufshcd_validate_link_params(struct ufs_hba *hba) | |
| { | |
| int ret, val; | |
| /* | |
| * lanes_per_direction is only populated by the platform glue (it | |
| * defaults to 2 or is read from the "lanes-per-direction" devicetree | |
| * property). Controllers probed via ufshcd-pci leave it unset (0), in | |
| * which case there is no expected lane count to validate the connected | |
| * lanes against. Skip the check instead of failing link startup. | |
| */ | |
| if (!hba->lanes_per_direction) | |
| return 0; | |
| ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), | |
| &val); | |
| if (ret) | |
| return ret; | |
| if (val != hba->lanes_per_direction) { | |
| dev_err(hba->dev, "Tx lane mismatch [config,reported] [%d,%d]\n", | |
| hba->lanes_per_direction, val); | |
| return -ENOLINK; | |
| } | |
| ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), | |
| &val); | |
| if (ret) | |
| return ret; | |
| if (val != hba->lanes_per_direction) { | |
| dev_err(hba->dev, "Rx lane mismatch [config,reported] [%d,%d]\n", | |
| hba->lanes_per_direction, val); | |
| return -ENOLINK; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * ufshcd_link_startup - Initialize unipro link startup | |
| * @hba: per adapter instance | |
| * | |
| * Return: 0 for success, non-zero in case of failure. | |
| */ | |
| static int ufshcd_link_startup(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| int retries = DME_LINKSTARTUP_RETRIES; | |
| bool link_startup_again = false; | |
| /* | |
| * If UFS device isn't active then we will have to issue link startup | |
| * 2 times to make sure the device state move to active. | |
| */ | |
| if (!(hba->quirks & UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE) && | |
| !ufshcd_is_ufs_dev_active(hba)) | |
| link_startup_again = true; | |
| link_startup: | |
| do { | |
| ufshcd_vops_link_startup_notify(hba, PRE_CHANGE); | |
| ret = ufshcd_dme_link_startup(hba); | |
| /* check if device is detected by inter-connect layer */ | |
| if (!ret && !ufshcd_is_device_present(hba)) { | |
| ufshcd_update_evt_hist(hba, | |
| UFS_EVT_LINK_STARTUP_FAIL, | |
| 0); | |
| dev_err(hba->dev, "%s: Device not present\n", __func__); | |
| ret = -ENXIO; | |
| goto out; | |
| } | |
| /* | |
| * DME link lost indication is only received when link is up, | |
| * but we can't be sure if the link is up until link startup | |
| * succeeds. So reset the local Uni-Pro and try again. | |
| */ | |
| if (ret && retries && ufshcd_hba_enable(hba)) { | |
| ufshcd_update_evt_hist(hba, | |
| UFS_EVT_LINK_STARTUP_FAIL, | |
| (u32)ret); | |
| goto out; | |
| } | |
| } while (ret && retries--); | |
| if (ret) { | |
| /* failed to get the link up... retire */ | |
| ufshcd_update_evt_hist(hba, | |
| UFS_EVT_LINK_STARTUP_FAIL, | |
| (u32)ret); | |
| goto out; | |
| } | |
| if (link_startup_again) { | |
| link_startup_again = false; | |
| retries = DME_LINKSTARTUP_RETRIES; | |
| goto link_startup; | |
| } | |
| /* Mark that link is up in PWM-G1, 1-lane, SLOW-AUTO mode */ | |
| ufshcd_init_pwr_info(hba); | |
| ufshcd_print_pwr_info(hba); | |
| if (hba->quirks & UFSHCD_QUIRK_BROKEN_LCC) { | |
| ret = ufshcd_disable_device_tx_lcc(hba); | |
| if (ret) | |
| goto out; | |
| } | |
| ret = ufshcd_validate_link_params(hba); | |
| if (ret) | |
| goto out; | |
| /* Include any host controller configuration via UIC commands */ | |
| ret = ufshcd_vops_link_startup_notify(hba, POST_CHANGE); | |
| if (ret) | |
| goto out; | |
| /* Clear UECPA once due to LINERESET has happened during LINK_STARTUP */ | |
| ufshcd_readl(hba, REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER); | |
| ret = ufshcd_make_hba_operational(hba); | |
| out: | |
| if (ret) | |
| dev_err(hba->dev, "link startup failed %d\n", ret); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_verify_dev_init() - Verify device initialization | |
| * @hba: per-adapter instance | |
| * | |
| * Send NOP OUT UPIU and wait for NOP IN response to check whether the | |
| * device Transport Protocol (UTP) layer is ready after a reset. | |
| * If the UTP layer at the device side is not initialized, it may | |
| * not respond with NOP IN UPIU within timeout of %NOP_OUT_TIMEOUT | |
| * and we retry sending NOP OUT for %NOP_OUT_RETRIES iterations. | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| static int ufshcd_verify_dev_init(struct ufs_hba *hba) | |
| { | |
| int err = 0; | |
| int retries; | |
| ufshcd_dev_man_lock(hba); | |
| for (retries = NOP_OUT_RETRIES; retries > 0; retries--) { | |
| err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP, | |
| hba->nop_out_timeout); | |
| if (!err || err == -ETIMEDOUT) | |
| break; | |
| dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err); | |
| } | |
| ufshcd_dev_man_unlock(hba); | |
| if (err) | |
| dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_setup_links - associate link b/w device wlun and other luns | |
| * @sdev: pointer to SCSI device | |
| * @hba: pointer to ufs hba | |
| */ | |
| static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev) | |
| { | |
| struct device_link *link; | |
| /* | |
| * Device wlun is the supplier & rest of the luns are consumers. | |
| * This ensures that device wlun suspends after all other luns. | |
| */ | |
| if (hba->ufs_device_wlun) { | |
| link = device_link_add(&sdev->sdev_gendev, | |
| &hba->ufs_device_wlun->sdev_gendev, | |
| DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE); | |
| if (!link) { | |
| dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n", | |
| dev_name(&hba->ufs_device_wlun->sdev_gendev)); | |
| return; | |
| } | |
| hba->luns_avail--; | |
| /* Ignore REPORT_LUN wlun probing */ | |
| if (hba->luns_avail == 1) { | |
| ufshcd_rpm_put(hba); | |
| return; | |
| } | |
| } else { | |
| /* | |
| * Device wlun is probed. The assumption is that WLUNs are | |
| * scanned before other LUNs. | |
| */ | |
| hba->luns_avail--; | |
| } | |
| } | |
| /** | |
| * ufshcd_lu_init - Initialize the relevant parameters of the LU | |
| * @hba: per-adapter instance | |
| * @sdev: pointer to SCSI device | |
| */ | |
| static void ufshcd_lu_init(struct ufs_hba *hba, struct scsi_device *sdev) | |
| { | |
| int len = QUERY_DESC_MAX_SIZE; | |
| u8 lun = ufshcd_scsi_to_upiu_lun(sdev->lun); | |
| u8 lun_qdepth = hba->nutrs; | |
| u8 *desc_buf; | |
| int ret; | |
| desc_buf = kzalloc(len, GFP_KERNEL); | |
| if (!desc_buf) | |
| goto set_qdepth; | |
| ret = ufshcd_read_unit_desc_param(hba, lun, 0, desc_buf, len); | |
| if (ret < 0) { | |
| if (ret == -EOPNOTSUPP) | |
| /* If LU doesn't support unit descriptor, its queue depth is set to 1 */ | |
| lun_qdepth = 1; | |
| kfree(desc_buf); | |
| goto set_qdepth; | |
| } | |
| if (desc_buf[UNIT_DESC_PARAM_LU_Q_DEPTH]) { | |
| /* | |
| * In per-LU queueing architecture, bLUQueueDepth will not be 0, then we will | |
| * use the smaller between UFSHCI CAP.NUTRS and UFS LU bLUQueueDepth | |
| */ | |
| lun_qdepth = min_t(int, desc_buf[UNIT_DESC_PARAM_LU_Q_DEPTH], hba->nutrs); | |
| } | |
| /* | |
| * According to UFS device specification, the write protection mode is only supported by | |
| * normal LU, not supported by WLUN. | |
| */ | |
| if (hba->dev_info.f_power_on_wp_en && lun < hba->dev_info.max_lu_supported && | |
| !hba->dev_info.is_lu_power_on_wp && | |
| desc_buf[UNIT_DESC_PARAM_LU_WR_PROTECT] == UFS_LU_POWER_ON_WP) | |
| hba->dev_info.is_lu_power_on_wp = true; | |
| /* In case of RPMB LU, check if advanced RPMB mode is enabled, and get region size */ | |
| if (desc_buf[UNIT_DESC_PARAM_UNIT_INDEX] == UFS_UPIU_RPMB_WLUN) { | |
| if (desc_buf[RPMB_UNIT_DESC_PARAM_REGION_EN] & BIT(4)) | |
| hba->dev_info.b_advanced_rpmb_en = true; | |
| hba->dev_info.rpmb_region_size[0] = desc_buf[RPMB_UNIT_DESC_PARAM_REGION0_SIZE]; | |
| hba->dev_info.rpmb_region_size[1] = desc_buf[RPMB_UNIT_DESC_PARAM_REGION1_SIZE]; | |
| hba->dev_info.rpmb_region_size[2] = desc_buf[RPMB_UNIT_DESC_PARAM_REGION2_SIZE]; | |
| hba->dev_info.rpmb_region_size[3] = desc_buf[RPMB_UNIT_DESC_PARAM_REGION3_SIZE]; | |
| if (hba->dev_info.wspecversion <= 0x0220) { | |
| /* | |
| * These older spec chips have only one RPMB region, | |
| * sized between 128 kB minimum and 16 MB maximum. | |
| * No per region size fields are provided (respective | |
| * REGIONX_SIZE fields always contain zeros), so get | |
| * it from the logical block count and size fields for | |
| * compatibility | |
| * | |
| * (See JESD220C-2_2 Section 14.1.4.6 | |
| * RPMB Unit Descriptor,* offset 13h, 4 bytes) | |
| */ | |
| hba->dev_info.rpmb_region_size[0] = | |
| (get_unaligned_be64(desc_buf | |
| + RPMB_UNIT_DESC_PARAM_LOGICAL_BLK_COUNT) | |
| << desc_buf[RPMB_UNIT_DESC_PARAM_LOGICAL_BLK_SIZE]) | |
| / SZ_128K; | |
| } | |
| } | |
| kfree(desc_buf); | |
| set_qdepth: | |
| /* | |
| * For WLUNs that don't support unit descriptor, queue depth is set to 1. For LUs whose | |
| * bLUQueueDepth == 0, the queue depth is set to a maximum value that host can queue. | |
| */ | |
| dev_dbg(hba->dev, "Set LU %x queue depth %d\n", lun, lun_qdepth); | |
| scsi_change_queue_depth(sdev, lun_qdepth); | |
| } | |
| /** | |
| * ufshcd_sdev_init - handle initial SCSI device configurations | |
| * @sdev: pointer to SCSI device | |
| * | |
| * Return: success. | |
| */ | |
| static int ufshcd_sdev_init(struct scsi_device *sdev) | |
| { | |
| struct ufs_hba *hba; | |
| hba = shost_priv(sdev->host); | |
| /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */ | |
| sdev->use_10_for_ms = 1; | |
| /* DBD field should be set to 1 in mode sense(10) */ | |
| sdev->set_dbd_for_ms = 1; | |
| /* allow SCSI layer to restart the device in case of errors */ | |
| sdev->allow_restart = 1; | |
| /* REPORT SUPPORTED OPERATION CODES is not supported */ | |
| sdev->no_report_opcodes = 1; | |
| /* WRITE_SAME command is not supported */ | |
| sdev->no_write_same = 1; | |
| ufshcd_lu_init(hba, sdev); | |
| ufshcd_setup_links(hba, sdev); | |
| return 0; | |
| } | |
| /** | |
| * ufshcd_change_queue_depth - change queue depth | |
| * @sdev: pointer to SCSI device | |
| * @depth: required depth to set | |
| * | |
| * Change queue depth and make sure the max. limits are not crossed. | |
| * | |
| * Return: new queue depth. | |
| */ | |
| static int ufshcd_change_queue_depth(struct scsi_device *sdev, int depth) | |
| { | |
| return scsi_change_queue_depth(sdev, min(depth, sdev->host->can_queue)); | |
| } | |
| /** | |
| * ufshcd_sdev_configure - adjust SCSI device configurations | |
| * @sdev: pointer to SCSI device | |
| * @lim: queue limits | |
| * | |
| * Return: 0 (success). | |
| */ | |
| static int ufshcd_sdev_configure(struct scsi_device *sdev, | |
| struct queue_limits *lim) | |
| { | |
| struct ufs_hba *hba = shost_priv(sdev->host); | |
| struct request_queue *q = sdev->request_queue; | |
| lim->dma_pad_mask = PRDT_DATA_BYTE_COUNT_PAD - 1; | |
| /* | |
| * Block runtime-pm until all consumers are added. | |
| * Refer ufshcd_setup_links(). | |
| */ | |
| if (is_device_wlun(sdev)) | |
| pm_runtime_get_noresume(&sdev->sdev_gendev); | |
| else if (ufshcd_is_rpm_autosuspend_allowed(hba)) | |
| sdev->rpm_autosuspend = 1; | |
| /* | |
| * Do not print messages during runtime PM to avoid never-ending cycles | |
| * of messages written back to storage by user space causing runtime | |
| * resume, causing more messages and so on. | |
| */ | |
| sdev->silence_suspend = 1; | |
| if (hba->vops && hba->vops->config_scsi_dev) | |
| hba->vops->config_scsi_dev(sdev); | |
| ufshcd_crypto_register(hba, q); | |
| return 0; | |
| } | |
| /** | |
| * ufshcd_sdev_destroy - remove SCSI device configurations | |
| * @sdev: pointer to SCSI device | |
| */ | |
| static void ufshcd_sdev_destroy(struct scsi_device *sdev) | |
| { | |
| struct ufs_hba *hba; | |
| unsigned long flags; | |
| hba = shost_priv(sdev->host); | |
| /* Drop the reference as it won't be needed anymore */ | |
| if (ufshcd_scsi_to_upiu_lun(sdev->lun) == UFS_UPIU_UFS_DEVICE_WLUN) { | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| hba->ufs_device_wlun = NULL; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| } else if (hba->ufs_device_wlun) { | |
| struct device *supplier = NULL; | |
| /* Ensure UFS Device WLUN exists and does not disappear */ | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (hba->ufs_device_wlun) { | |
| supplier = &hba->ufs_device_wlun->sdev_gendev; | |
| get_device(supplier); | |
| } | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| if (supplier) { | |
| /* | |
| * If a LUN fails to probe (e.g. absent BOOT WLUN), the | |
| * device will not have been registered but can still | |
| * have a device link holding a reference to the device. | |
| */ | |
| device_link_remove(&sdev->sdev_gendev, supplier); | |
| put_device(supplier); | |
| } | |
| } | |
| } | |
| /** | |
| * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status | |
| * @cmd: SCSI command | |
| * @scsi_status: SCSI command status | |
| * | |
| * Return: value base on SCSI command status. | |
| */ | |
| static inline int ufshcd_scsi_cmd_status(struct scsi_cmnd *cmd, int scsi_status) | |
| { | |
| int result = 0; | |
| switch (scsi_status) { | |
| case SAM_STAT_CHECK_CONDITION: | |
| ufshcd_copy_sense_data(cmd); | |
| fallthrough; | |
| case SAM_STAT_GOOD: | |
| result |= DID_OK << 16 | scsi_status; | |
| break; | |
| case SAM_STAT_TASK_SET_FULL: | |
| case SAM_STAT_BUSY: | |
| case SAM_STAT_TASK_ABORTED: | |
| ufshcd_copy_sense_data(cmd); | |
| result |= scsi_status; | |
| break; | |
| default: | |
| result |= DID_ERROR << 16; | |
| break; | |
| } /* end of switch */ | |
| return result; | |
| } | |
| /** | |
| * ufshcd_transfer_rsp_status - Get overall status of the response | |
| * @hba: per adapter instance | |
| * @cmd: SCSI command | |
| * @cqe: pointer to the completion queue entry | |
| * | |
| * Return: result of the command to notify SCSI midlayer. | |
| */ | |
| static inline int ufshcd_transfer_rsp_status(struct ufs_hba *hba, | |
| struct scsi_cmnd *cmd, | |
| struct cq_entry *cqe) | |
| { | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| const int tag = scsi_cmd_to_rq(cmd)->tag; | |
| int result = 0; | |
| int scsi_status; | |
| enum utp_ocs ocs; | |
| u8 upiu_flags; | |
| u32 resid; | |
| upiu_flags = lrbp->ucd_rsp_ptr->header.flags; | |
| resid = be32_to_cpu(lrbp->ucd_rsp_ptr->sr.residual_transfer_count); | |
| /* | |
| * Test !overflow instead of underflow to support UFS devices that do | |
| * not set either flag. | |
| */ | |
| if (resid && !(upiu_flags & UPIU_RSP_FLAG_OVERFLOW)) | |
| scsi_set_resid(cmd, resid); | |
| /* overall command status of utrd */ | |
| ocs = ufshcd_get_tr_ocs(lrbp, cqe); | |
| if (hba->quirks & UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR) { | |
| if (lrbp->ucd_rsp_ptr->header.response || | |
| lrbp->ucd_rsp_ptr->header.status) | |
| ocs = OCS_SUCCESS; | |
| } | |
| switch (ocs) { | |
| case OCS_SUCCESS: | |
| hba->ufs_stats.last_hibern8_exit_tstamp = ktime_set(0, 0); | |
| switch (ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr)) { | |
| case UPIU_TRANSACTION_RESPONSE: | |
| /* | |
| * get the result based on SCSI status response | |
| * to notify the SCSI midlayer of the command status | |
| */ | |
| scsi_status = lrbp->ucd_rsp_ptr->header.status; | |
| result = ufshcd_scsi_cmd_status(cmd, scsi_status); | |
| /* | |
| * Currently we are only supporting BKOPs exception | |
| * events hence we can ignore BKOPs exception event | |
| * during power management callbacks. BKOPs exception | |
| * event is not expected to be raised in runtime suspend | |
| * callback as it allows the urgent bkops. | |
| * During system suspend, we are anyway forcefully | |
| * disabling the bkops and if urgent bkops is needed | |
| * it will be enabled on system resume. Long term | |
| * solution could be to abort the system suspend if | |
| * UFS device needs urgent BKOPs. | |
| */ | |
| if (!hba->pm_op_in_progress && | |
| !ufshcd_eh_in_progress(hba) && | |
| ufshcd_is_exception_event(lrbp->ucd_rsp_ptr)) | |
| /* Flushed in suspend */ | |
| schedule_work(&hba->eeh_work); | |
| break; | |
| case UPIU_TRANSACTION_REJECT_UPIU: | |
| /* TODO: handle Reject UPIU Response */ | |
| result = DID_ERROR << 16; | |
| dev_err(hba->dev, | |
| "Reject UPIU not fully implemented\n"); | |
| break; | |
| default: | |
| dev_err(hba->dev, | |
| "Unexpected request response code = %x\n", | |
| ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr)); | |
| result = DID_ERROR << 16; | |
| break; | |
| } | |
| break; | |
| case OCS_ABORTED: | |
| case OCS_INVALID_COMMAND_STATUS: | |
| result |= DID_REQUEUE << 16; | |
| dev_warn(hba->dev, "OCS %s from controller for tag %d\n", | |
| ocs == OCS_ABORTED ? "aborted" : "invalid", tag); | |
| break; | |
| case OCS_INVALID_CMD_TABLE_ATTR: | |
| case OCS_INVALID_PRDT_ATTR: | |
| case OCS_MISMATCH_DATA_BUF_SIZE: | |
| case OCS_MISMATCH_RESP_UPIU_SIZE: | |
| case OCS_PEER_COMM_FAILURE: | |
| case OCS_FATAL_ERROR: | |
| case OCS_DEVICE_FATAL_ERROR: | |
| case OCS_INVALID_CRYPTO_CONFIG: | |
| case OCS_GENERAL_CRYPTO_ERROR: | |
| default: | |
| result |= DID_ERROR << 16; | |
| dev_err(hba->dev, "OCS error from controller = %x for tag %d\n", | |
| ocs, tag); | |
| ufshcd_print_evt_hist(hba); | |
| ufshcd_print_host_state(hba); | |
| break; | |
| } /* end of switch */ | |
| if ((host_byte(result) != DID_OK) && | |
| (host_byte(result) != DID_REQUEUE) && !hba->silence_err_logs) { | |
| if (cqe) | |
| ufshcd_hex_dump("UPIU CQE: ", cqe, sizeof(struct cq_entry)); | |
| ufshcd_print_tr(hba, cmd, true); | |
| } | |
| return result; | |
| } | |
| static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba, | |
| u32 intr_mask) | |
| { | |
| if (!ufshcd_is_auto_hibern8_supported(hba) || | |
| !ufshcd_is_auto_hibern8_enabled(hba)) | |
| return false; | |
| if (!(intr_mask & UFSHCD_UIC_HIBERN8_MASK)) | |
| return false; | |
| if (hba->active_uic_cmd && | |
| (hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_ENTER || | |
| hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_EXIT)) | |
| return false; | |
| return true; | |
| } | |
| /** | |
| * ufshcd_uic_cmd_compl - handle completion of uic command | |
| * @hba: per adapter instance | |
| * @intr_status: interrupt status generated by the controller | |
| * | |
| * Return: | |
| * IRQ_HANDLED - If interrupt is valid | |
| * IRQ_NONE - If invalid interrupt | |
| */ | |
| static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status) | |
| { | |
| irqreturn_t retval = IRQ_NONE; | |
| struct uic_command *cmd; | |
| guard(spinlock_irqsave)(hba->host->host_lock); | |
| cmd = hba->active_uic_cmd; | |
| if (!cmd) { | |
| dev_err(hba->dev, | |
| "No active UIC command. Maybe a timeout occurred?\n"); | |
| return retval; | |
| } | |
| if (ufshcd_is_auto_hibern8_error(hba, intr_status)) | |
| hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status); | |
| if (intr_status & UIC_COMMAND_COMPL) { | |
| /* | |
| * Store the UIC command result in the lowest byte of | |
| * cmd->argument2. | |
| */ | |
| cmd->argument2 |= ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2) & | |
| MASK_UIC_COMMAND_RESULT; | |
| /* Store the DME attribute value in cmd->argument3. */ | |
| cmd->argument3 = ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3); | |
| if (!hba->uic_async_done) | |
| cmd->cmd_active = false; | |
| complete(&cmd->done); | |
| retval = IRQ_HANDLED; | |
| } | |
| if (intr_status & UFSHCD_UIC_PWR_MASK && hba->uic_async_done) { | |
| cmd->cmd_active = false; | |
| complete(hba->uic_async_done); | |
| retval = IRQ_HANDLED; | |
| } | |
| if (retval == IRQ_HANDLED) | |
| ufshcd_add_uic_command_trace(hba, cmd, UFS_CMD_COMP); | |
| return retval; | |
| } | |
| /* Release the resources allocated for processing a SCSI command. */ | |
| void ufshcd_release_scsi_cmd(struct ufs_hba *hba, struct scsi_cmnd *cmd) | |
| { | |
| scsi_dma_unmap(cmd); | |
| ufshcd_crypto_clear_prdt(hba, cmd); | |
| ufshcd_release(hba); | |
| ufshcd_clk_scaling_update_busy(hba); | |
| } | |
| /** | |
| * ufshcd_compl_one_cqe - handle a completion queue entry | |
| * @hba: per adapter instance | |
| * @task_tag: the task tag of the request to be completed | |
| * @cqe: pointer to the completion queue entry | |
| */ | |
| void ufshcd_compl_one_cqe(struct ufs_hba *hba, int task_tag, | |
| struct cq_entry *cqe) | |
| { | |
| struct scsi_cmnd *cmd = ufshcd_tag_to_cmd(hba, task_tag); | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| enum utp_ocs ocs; | |
| if (WARN_ONCE(!cmd, "invalid completion tag %d, cqe->command_desc_base_addr = %#llx\n", | |
| task_tag, cqe ? le64_to_cpu(cqe->command_desc_base_addr) : 0ULL)) | |
| return; | |
| if (hba->monitor.enabled) { | |
| lrbp->compl_time_stamp = ktime_get(); | |
| lrbp->compl_time_stamp_local_clock = local_clock(); | |
| } | |
| if (ufshcd_is_scsi_cmd(cmd)) { | |
| if (unlikely(ufshcd_should_inform_monitor(hba, cmd))) | |
| ufshcd_update_monitor(hba, cmd); | |
| ufshcd_add_command_trace(hba, cmd, UFS_CMD_COMP); | |
| cmd->result = ufshcd_transfer_rsp_status(hba, cmd, cqe); | |
| ufshcd_release_scsi_cmd(hba, cmd); | |
| } else { | |
| if (cqe) { | |
| ocs = cqe->overall_status & MASK_OCS; | |
| lrbp->utr_descriptor_ptr->header.ocs = ocs; | |
| } else { | |
| ocs = lrbp->utr_descriptor_ptr->header.ocs; | |
| } | |
| ufshcd_add_query_upiu_trace( | |
| hba, | |
| ocs == OCS_SUCCESS ? UFS_QUERY_COMP : UFS_QUERY_ERR, | |
| (struct utp_upiu_req *)lrbp->ucd_rsp_ptr); | |
| cmd->result = 0; | |
| } | |
| /* Do not touch lrbp after scsi_done() has been called. */ | |
| scsi_done(cmd); | |
| } | |
| /** | |
| * __ufshcd_transfer_req_compl - handle SCSI and query command completion | |
| * @hba: per adapter instance | |
| * @completed_reqs: bitmask that indicates which requests to complete | |
| */ | |
| static void __ufshcd_transfer_req_compl(struct ufs_hba *hba, | |
| unsigned long completed_reqs) | |
| { | |
| int tag; | |
| for_each_set_bit(tag, &completed_reqs, hba->nutrs) | |
| ufshcd_compl_one_cqe(hba, tag, NULL); | |
| } | |
| /* Any value that is not an existing queue number is fine for this constant. */ | |
| enum { | |
| UFSHCD_POLL_FROM_INTERRUPT_CONTEXT = -1 | |
| }; | |
| static void ufshcd_clear_polled(struct ufs_hba *hba, | |
| unsigned long *completed_reqs) | |
| { | |
| int tag; | |
| for_each_set_bit(tag, completed_reqs, hba->nutrs) { | |
| struct scsi_cmnd *cmd = scsi_host_find_tag(hba->host, tag); | |
| if (!cmd) | |
| continue; | |
| if (scsi_cmd_to_rq(cmd)->cmd_flags & REQ_POLLED) | |
| __clear_bit(tag, completed_reqs); | |
| } | |
| } | |
| /* | |
| * Return: > 0 if one or more commands have been completed or 0 if no | |
| * requests have been completed. | |
| */ | |
| static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num) | |
| { | |
| struct ufs_hba *hba = shost_priv(shost); | |
| unsigned long completed_reqs, flags; | |
| u32 tr_doorbell; | |
| struct ufs_hw_queue *hwq; | |
| if (hba->mcq_enabled) { | |
| hwq = &hba->uhq[queue_num]; | |
| return ufshcd_mcq_poll_cqe_lock(hba, hwq); | |
| } | |
| spin_lock_irqsave(&hba->outstanding_lock, flags); | |
| tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); | |
| completed_reqs = ~tr_doorbell & hba->outstanding_reqs; | |
| WARN_ONCE(completed_reqs & ~hba->outstanding_reqs, | |
| "completed: %#lx; outstanding: %#lx\n", completed_reqs, | |
| hba->outstanding_reqs); | |
| if (queue_num == UFSHCD_POLL_FROM_INTERRUPT_CONTEXT) { | |
| /* Do not complete polled requests from interrupt context. */ | |
| ufshcd_clear_polled(hba, &completed_reqs); | |
| } | |
| hba->outstanding_reqs &= ~completed_reqs; | |
| spin_unlock_irqrestore(&hba->outstanding_lock, flags); | |
| if (completed_reqs) | |
| __ufshcd_transfer_req_compl(hba, completed_reqs); | |
| return completed_reqs != 0; | |
| } | |
| static bool ufshcd_mcq_force_compl_one(struct request *rq, void *priv) | |
| { | |
| struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq); | |
| struct scsi_device *sdev = rq->q->queuedata; | |
| struct Scsi_Host *shost = sdev->host; | |
| struct ufs_hba *hba = shost_priv(shost); | |
| struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, rq); | |
| if (blk_mq_is_reserved_rq(rq) || !hwq) | |
| return true; | |
| ufshcd_mcq_compl_all_cqes_lock(hba, hwq); | |
| /* | |
| * For those cmds of which the cqes are not present in the cq, complete | |
| * them explicitly. | |
| */ | |
| scoped_guard(spinlock_irqsave, &hwq->cq_lock) { | |
| if (!test_bit(SCMD_STATE_COMPLETE, &cmd->state)) { | |
| set_host_byte(cmd, DID_REQUEUE); | |
| ufshcd_release_scsi_cmd(hba, cmd); | |
| scsi_done(cmd); | |
| } | |
| } | |
| return true; | |
| } | |
| static bool ufshcd_mcq_compl_one(struct request *rq, void *priv) | |
| { | |
| struct scsi_device *sdev = rq->q->queuedata; | |
| struct Scsi_Host *shost = sdev->host; | |
| struct ufs_hba *hba = shost_priv(shost); | |
| struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, rq); | |
| if (!blk_mq_is_reserved_rq(rq) && hwq) | |
| ufshcd_mcq_poll_cqe_lock(hba, hwq); | |
| return true; | |
| } | |
| /** | |
| * ufshcd_mcq_compl_pending_transfer - MCQ mode function. It is | |
| * invoked from the error handler context or ufshcd_host_reset_and_restore() | |
| * to complete the pending transfers and free the resources associated with | |
| * the scsi command. | |
| * | |
| * @hba: per adapter instance | |
| * @force_compl: This flag is set to true when invoked | |
| * from ufshcd_host_reset_and_restore() in which case it requires special | |
| * handling because the host controller has been reset by ufshcd_hba_stop(). | |
| */ | |
| static void ufshcd_mcq_compl_pending_transfer(struct ufs_hba *hba, | |
| bool force_compl) | |
| { | |
| blk_mq_tagset_busy_iter(&hba->host->tag_set, | |
| force_compl ? ufshcd_mcq_force_compl_one : | |
| ufshcd_mcq_compl_one, | |
| NULL); | |
| } | |
| /** | |
| * ufshcd_transfer_req_compl - handle SCSI and query command completion | |
| * @hba: per adapter instance | |
| * | |
| * Return: | |
| * IRQ_HANDLED - If interrupt is valid | |
| * IRQ_NONE - If invalid interrupt | |
| */ | |
| static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) | |
| { | |
| /* Resetting interrupt aggregation counters first and reading the | |
| * DOOR_BELL afterward allows us to handle all the completed requests. | |
| * In order to prevent other interrupts starvation the DB is read once | |
| * after reset. The down side of this solution is the possibility of | |
| * false interrupt if device completes another request after resetting | |
| * aggregation and before reading the DB. | |
| */ | |
| if (ufshcd_is_intr_aggr_allowed(hba) && | |
| !(hba->quirks & UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR)) | |
| ufshcd_reset_intr_aggr(hba); | |
| if (ufs_fail_completion(hba)) | |
| return IRQ_HANDLED; | |
| /* | |
| * Ignore the ufshcd_poll() return value and return IRQ_HANDLED since we | |
| * do not want polling to trigger spurious interrupt complaints. | |
| */ | |
| ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); | |
| return IRQ_HANDLED; | |
| } | |
| int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask) | |
| { | |
| return ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, | |
| QUERY_ATTR_IDN_EE_CONTROL, 0, 0, | |
| &ee_ctrl_mask); | |
| } | |
| int ufshcd_write_ee_control(struct ufs_hba *hba) | |
| { | |
| int err; | |
| mutex_lock(&hba->ee_ctrl_mutex); | |
| err = __ufshcd_write_ee_control(hba, hba->ee_ctrl_mask); | |
| mutex_unlock(&hba->ee_ctrl_mutex); | |
| if (err) | |
| dev_err(hba->dev, "%s: failed to write ee control %d\n", | |
| __func__, err); | |
| return err; | |
| } | |
| int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, | |
| const u16 *other_mask, u16 set, u16 clr) | |
| { | |
| u16 new_mask, ee_ctrl_mask; | |
| int err = 0; | |
| mutex_lock(&hba->ee_ctrl_mutex); | |
| new_mask = (*mask & ~clr) | set; | |
| ee_ctrl_mask = new_mask | *other_mask; | |
| if (ee_ctrl_mask != hba->ee_ctrl_mask) | |
| err = __ufshcd_write_ee_control(hba, ee_ctrl_mask); | |
| /* Still need to update 'mask' even if 'ee_ctrl_mask' was unchanged */ | |
| if (!err) { | |
| hba->ee_ctrl_mask = ee_ctrl_mask; | |
| *mask = new_mask; | |
| } | |
| mutex_unlock(&hba->ee_ctrl_mutex); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_disable_ee - disable exception event | |
| * @hba: per-adapter instance | |
| * @mask: exception event to disable | |
| * | |
| * Disables exception event in the device so that the EVENT_ALERT | |
| * bit is not set. | |
| * | |
| * Return: zero on success, non-zero error value on failure. | |
| */ | |
| static inline int ufshcd_disable_ee(struct ufs_hba *hba, u16 mask) | |
| { | |
| return ufshcd_update_ee_drv_mask(hba, 0, mask); | |
| } | |
| /** | |
| * ufshcd_enable_ee - enable exception event | |
| * @hba: per-adapter instance | |
| * @mask: exception event to enable | |
| * | |
| * Enable corresponding exception event in the device to allow | |
| * device to alert host in critical scenarios. | |
| * | |
| * Return: zero on success, non-zero error value on failure. | |
| */ | |
| static inline int ufshcd_enable_ee(struct ufs_hba *hba, u16 mask) | |
| { | |
| return ufshcd_update_ee_drv_mask(hba, mask, 0); | |
| } | |
| /** | |
| * ufshcd_enable_auto_bkops - Allow device managed BKOPS | |
| * @hba: per-adapter instance | |
| * | |
| * Allow device to manage background operations on its own. Enabling | |
| * this might lead to inconsistent latencies during normal data transfers | |
| * as the device is allowed to manage its own way of handling background | |
| * operations. | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| static int ufshcd_enable_auto_bkops(struct ufs_hba *hba) | |
| { | |
| int err = 0; | |
| if (hba->auto_bkops_enabled) | |
| goto out; | |
| err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG, | |
| QUERY_FLAG_IDN_BKOPS_EN, 0, NULL); | |
| if (err) { | |
| dev_err(hba->dev, "%s: failed to enable bkops %d\n", | |
| __func__, err); | |
| goto out; | |
| } | |
| hba->auto_bkops_enabled = true; | |
| trace_ufshcd_auto_bkops_state(hba, "Enabled"); | |
| /* No need of URGENT_BKOPS exception from the device */ | |
| err = ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS); | |
| if (err) | |
| dev_err(hba->dev, "%s: failed to disable exception event %d\n", | |
| __func__, err); | |
| out: | |
| return err; | |
| } | |
| /** | |
| * ufshcd_disable_auto_bkops - block device in doing background operations | |
| * @hba: per-adapter instance | |
| * | |
| * Disabling background operations improves command response latency but | |
| * has drawback of device moving into critical state where the device is | |
| * not-operable. Make sure to call ufshcd_enable_auto_bkops() whenever the | |
| * host is idle so that BKOPS are managed effectively without any negative | |
| * impacts. | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| static int ufshcd_disable_auto_bkops(struct ufs_hba *hba) | |
| { | |
| int err = 0; | |
| if (!hba->auto_bkops_enabled) | |
| goto out; | |
| /* | |
| * If host assisted BKOPs is to be enabled, make sure | |
| * urgent bkops exception is allowed. | |
| */ | |
| err = ufshcd_enable_ee(hba, MASK_EE_URGENT_BKOPS); | |
| if (err) { | |
| dev_err(hba->dev, "%s: failed to enable exception event %d\n", | |
| __func__, err); | |
| goto out; | |
| } | |
| err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG, | |
| QUERY_FLAG_IDN_BKOPS_EN, 0, NULL); | |
| if (err) { | |
| dev_err(hba->dev, "%s: failed to disable bkops %d\n", | |
| __func__, err); | |
| ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS); | |
| goto out; | |
| } | |
| hba->auto_bkops_enabled = false; | |
| trace_ufshcd_auto_bkops_state(hba, "Disabled"); | |
| hba->urgent_bkops_lvl = BKOPS_STATUS_PERF_IMPACT; | |
| hba->is_urgent_bkops_lvl_checked = false; | |
| out: | |
| return err; | |
| } | |
| /** | |
| * ufshcd_force_reset_auto_bkops - force reset auto bkops state | |
| * @hba: per adapter instance | |
| * | |
| * After a device reset the device may toggle the BKOPS_EN flag | |
| * to default value. The s/w tracking variables should be updated | |
| * as well. This function would change the auto-bkops state based on | |
| * UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND. | |
| */ | |
| static void ufshcd_force_reset_auto_bkops(struct ufs_hba *hba) | |
| { | |
| if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) { | |
| hba->auto_bkops_enabled = false; | |
| hba->ee_ctrl_mask |= MASK_EE_URGENT_BKOPS; | |
| ufshcd_enable_auto_bkops(hba); | |
| } else { | |
| hba->auto_bkops_enabled = true; | |
| hba->ee_ctrl_mask &= ~MASK_EE_URGENT_BKOPS; | |
| ufshcd_disable_auto_bkops(hba); | |
| } | |
| hba->urgent_bkops_lvl = BKOPS_STATUS_PERF_IMPACT; | |
| hba->is_urgent_bkops_lvl_checked = false; | |
| } | |
| static inline int ufshcd_get_bkops_status(struct ufs_hba *hba, u32 *status) | |
| { | |
| return ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, | |
| QUERY_ATTR_IDN_BKOPS_STATUS, 0, 0, status); | |
| } | |
| /** | |
| * ufshcd_bkops_ctrl - control the auto bkops based on current bkops status | |
| * @hba: per-adapter instance | |
| * | |
| * Read the bkops_status from the UFS device and Enable fBackgroundOpsEn | |
| * flag in the device to permit background operations if the device | |
| * bkops_status is greater than or equal to the "hba->urgent_bkops_lvl", | |
| * disable otherwise. | |
| * | |
| * Return: 0 for success, non-zero in case of failure. | |
| * | |
| * NOTE: Caller of this function can check the "hba->auto_bkops_enabled" flag | |
| * to know whether auto bkops is enabled or disabled after this function | |
| * returns control to it. | |
| */ | |
| static int ufshcd_bkops_ctrl(struct ufs_hba *hba) | |
| { | |
| enum bkops_status status = hba->urgent_bkops_lvl; | |
| u32 curr_status = 0; | |
| int err; | |
| err = ufshcd_get_bkops_status(hba, &curr_status); | |
| if (err) { | |
| dev_err(hba->dev, "%s: failed to get BKOPS status %d\n", | |
| __func__, err); | |
| goto out; | |
| } else if (curr_status > BKOPS_STATUS_MAX) { | |
| dev_err(hba->dev, "%s: invalid BKOPS status %d\n", | |
| __func__, curr_status); | |
| err = -EINVAL; | |
| goto out; | |
| } | |
| if (curr_status >= status) | |
| err = ufshcd_enable_auto_bkops(hba); | |
| else | |
| err = ufshcd_disable_auto_bkops(hba); | |
| out: | |
| return err; | |
| } | |
| static inline int ufshcd_get_ee_status(struct ufs_hba *hba, u32 *status) | |
| { | |
| return ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, | |
| QUERY_ATTR_IDN_EE_STATUS, 0, 0, status); | |
| } | |
| static void ufshcd_bkops_exception_event_handler(struct ufs_hba *hba) | |
| { | |
| int err; | |
| u32 curr_status = 0; | |
| if (hba->is_urgent_bkops_lvl_checked) | |
| goto enable_auto_bkops; | |
| err = ufshcd_get_bkops_status(hba, &curr_status); | |
| if (err) { | |
| dev_err(hba->dev, "%s: failed to get BKOPS status %d\n", | |
| __func__, err); | |
| goto out; | |
| } | |
| /* | |
| * We are seeing that some devices are raising the urgent bkops | |
| * exception events even when BKOPS status doesn't indicate performace | |
| * impacted or critical. Handle these device by determining their urgent | |
| * bkops status at runtime. | |
| */ | |
| if ((curr_status > BKOPS_STATUS_NO_OP) && (curr_status < BKOPS_STATUS_PERF_IMPACT)) { | |
| dev_err(hba->dev, "%s: device raised urgent BKOPS exception for bkops status %d\n", | |
| __func__, curr_status); | |
| /* update the current status as the urgent bkops level */ | |
| hba->urgent_bkops_lvl = curr_status; | |
| hba->is_urgent_bkops_lvl_checked = true; | |
| } | |
| enable_auto_bkops: | |
| err = ufshcd_enable_auto_bkops(hba); | |
| out: | |
| if (err < 0) | |
| dev_err(hba->dev, "%s: failed to handle urgent bkops %d\n", | |
| __func__, err); | |
| } | |
| static int __ufshcd_wb_toggle(struct ufs_hba *hba, bool set, enum flag_idn idn) | |
| { | |
| u8 index; | |
| enum query_opcode opcode = set ? UPIU_QUERY_OPCODE_SET_FLAG : | |
| UPIU_QUERY_OPCODE_CLEAR_FLAG; | |
| index = ufshcd_wb_get_query_index(hba); | |
| return ufshcd_query_flag_retry(hba, opcode, idn, index, NULL); | |
| } | |
| int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable) | |
| { | |
| int ret; | |
| if (!ufshcd_is_wb_allowed(hba) || | |
| hba->dev_info.wb_enabled == enable) | |
| return 0; | |
| ret = __ufshcd_wb_toggle(hba, enable, QUERY_FLAG_IDN_WB_EN); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: Write Booster %s failed %d\n", | |
| __func__, enable ? "enabling" : "disabling", ret); | |
| return ret; | |
| } | |
| hba->dev_info.wb_enabled = enable; | |
| dev_dbg(hba->dev, "%s: Write Booster %s\n", | |
| __func__, enable ? "enabled" : "disabled"); | |
| return ret; | |
| } | |
| static void ufshcd_wb_toggle_buf_flush_during_h8(struct ufs_hba *hba, | |
| bool enable) | |
| { | |
| int ret; | |
| ret = __ufshcd_wb_toggle(hba, enable, | |
| QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: WB-Buf Flush during H8 %s failed %d\n", | |
| __func__, enable ? "enabling" : "disabling", ret); | |
| return; | |
| } | |
| dev_dbg(hba->dev, "%s: WB-Buf Flush during H8 %s\n", | |
| __func__, enable ? "enabled" : "disabled"); | |
| } | |
| int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable) | |
| { | |
| int ret; | |
| if (!ufshcd_is_wb_allowed(hba) || | |
| hba->dev_info.wb_buf_flush_enabled == enable) | |
| return 0; | |
| ret = __ufshcd_wb_toggle(hba, enable, QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: WB-Buf Flush %s failed %d\n", | |
| __func__, enable ? "enabling" : "disabling", ret); | |
| return ret; | |
| } | |
| hba->dev_info.wb_buf_flush_enabled = enable; | |
| dev_dbg(hba->dev, "%s: WB-Buf Flush %s\n", | |
| __func__, enable ? "enabled" : "disabled"); | |
| return ret; | |
| } | |
| int ufshcd_wb_set_resize_en(struct ufs_hba *hba, enum wb_resize_en en_mode) | |
| { | |
| int ret; | |
| u8 index; | |
| index = ufshcd_wb_get_query_index(hba); | |
| ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, | |
| QUERY_ATTR_IDN_WB_BUF_RESIZE_EN, index, 0, &en_mode); | |
| if (ret) | |
| dev_err(hba->dev, "%s: Enable WB buf resize operation failed %d\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| static bool ufshcd_wb_curr_buff_threshold_check(struct ufs_hba *hba, | |
| u32 avail_buf) | |
| { | |
| u32 cur_buf; | |
| int ret; | |
| u8 index; | |
| index = ufshcd_wb_get_query_index(hba); | |
| ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, | |
| QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE, | |
| index, 0, &cur_buf); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: dCurWriteBoosterBufferSize read failed %d\n", | |
| __func__, ret); | |
| return false; | |
| } | |
| if (!cur_buf) { | |
| dev_warn_once(hba->dev, "dCurWBBuf: %d WB disabled until free-space is available\n", | |
| cur_buf); | |
| return false; | |
| } | |
| /* Let it continue to flush when available buffer exceeds threshold */ | |
| return avail_buf < hba->vps->wb_flush_threshold; | |
| } | |
| static void ufshcd_wb_force_disable(struct ufs_hba *hba) | |
| { | |
| if (ufshcd_is_wb_buf_flush_allowed(hba)) | |
| ufshcd_wb_toggle_buf_flush(hba, false); | |
| ufshcd_wb_toggle_buf_flush_during_h8(hba, false); | |
| ufshcd_wb_toggle(hba, false); | |
| hba->caps &= ~UFSHCD_CAP_WB_EN; | |
| dev_info(hba->dev, "%s: WB force disabled\n", __func__); | |
| } | |
| static bool ufshcd_is_wb_buf_lifetime_available(struct ufs_hba *hba) | |
| { | |
| u32 lifetime; | |
| int ret; | |
| u8 index; | |
| index = ufshcd_wb_get_query_index(hba); | |
| ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, | |
| QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST, | |
| index, 0, &lifetime); | |
| if (ret) { | |
| dev_err(hba->dev, | |
| "%s: bWriteBoosterBufferLifeTimeEst read failed %d\n", | |
| __func__, ret); | |
| return false; | |
| } | |
| if (lifetime == UFS_WB_EXCEED_LIFETIME) { | |
| dev_err(hba->dev, "%s: WB buf lifetime is exhausted 0x%02X\n", | |
| __func__, lifetime); | |
| return false; | |
| } | |
| dev_dbg(hba->dev, "%s: WB buf lifetime is 0x%02X\n", | |
| __func__, lifetime); | |
| return true; | |
| } | |
| static bool ufshcd_wb_need_flush(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| u32 avail_buf; | |
| u8 index; | |
| if (!ufshcd_is_wb_allowed(hba)) | |
| return false; | |
| if (!ufshcd_is_wb_buf_lifetime_available(hba)) { | |
| ufshcd_wb_force_disable(hba); | |
| return false; | |
| } | |
| /* | |
| * With user-space reduction enabled, it's enough to enable flush | |
| * by checking only the available buffer. The threshold | |
| * defined here is > 90% full. | |
| * With user-space preserved enabled, the current-buffer | |
| * should be checked too because the wb buffer size can reduce | |
| * when disk tends to be full. This info is provided by current | |
| * buffer (dCurrentWriteBoosterBufferSize). | |
| */ | |
| index = ufshcd_wb_get_query_index(hba); | |
| ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, | |
| QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE, | |
| index, 0, &avail_buf); | |
| if (ret) { | |
| dev_warn(hba->dev, "%s: dAvailableWriteBoosterBufferSize read failed %d\n", | |
| __func__, ret); | |
| return false; | |
| } | |
| if (!hba->dev_info.b_presrv_uspc_en) | |
| return avail_buf <= UFS_WB_BUF_REMAIN_PERCENT(10); | |
| return ufshcd_wb_curr_buff_threshold_check(hba, avail_buf); | |
| } | |
| static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work) | |
| { | |
| struct ufs_hba *hba = container_of(to_delayed_work(work), | |
| struct ufs_hba, | |
| rpm_dev_flush_recheck_work); | |
| /* | |
| * To prevent unnecessary VCC power drain after device finishes | |
| * WriteBooster buffer flush or Auto BKOPs, force runtime resume | |
| * after a certain delay to recheck the threshold by next runtime | |
| * suspend. | |
| */ | |
| ufshcd_rpm_get_sync(hba); | |
| ufshcd_rpm_put_sync(hba); | |
| } | |
| /** | |
| * ufshcd_exception_event_handler - handle exceptions raised by device | |
| * @work: pointer to work data | |
| * | |
| * Read bExceptionEventStatus attribute from the device and handle the | |
| * exception event accordingly. | |
| */ | |
| static void ufshcd_exception_event_handler(struct work_struct *work) | |
| { | |
| struct ufs_hba *hba; | |
| int err; | |
| u32 status = 0; | |
| hba = container_of(work, struct ufs_hba, eeh_work); | |
| err = ufshcd_get_ee_status(hba, &status); | |
| if (err) { | |
| dev_err(hba->dev, "%s: failed to get exception status %d\n", | |
| __func__, err); | |
| return; | |
| } | |
| trace_ufshcd_exception_event(hba, status); | |
| if (status & hba->ee_drv_mask & MASK_EE_URGENT_BKOPS) | |
| ufshcd_bkops_exception_event_handler(hba); | |
| if (status & hba->ee_drv_mask & MASK_EE_URGENT_TEMP) | |
| ufs_hwmon_notify_event(hba, status & MASK_EE_URGENT_TEMP); | |
| if (status & hba->ee_drv_mask & MASK_EE_HEALTH_CRITICAL) { | |
| hba->critical_health_count++; | |
| sysfs_notify(&hba->dev->kobj, NULL, "critical_health"); | |
| } | |
| if (status & hba->ee_drv_mask & MASK_EE_DEV_LVL_EXCEPTION) { | |
| atomic_inc(&hba->dev_lvl_exception_count); | |
| sysfs_notify(&hba->dev->kobj, NULL, "device_lvl_exception_count"); | |
| } | |
| ufs_debugfs_exception_event(hba, status); | |
| } | |
| /* Complete requests that have door-bell cleared */ | |
| static void ufshcd_complete_requests(struct ufs_hba *hba, bool force_compl) | |
| { | |
| if (hba->mcq_enabled) | |
| ufshcd_mcq_compl_pending_transfer(hba, force_compl); | |
| else | |
| ufshcd_transfer_req_compl(hba); | |
| ufshcd_tmc_handler(hba); | |
| } | |
| /** | |
| * ufshcd_quirk_dl_nac_errors - This function checks if error handling is | |
| * to recover from the DL NAC errors or not. | |
| * @hba: per-adapter instance | |
| * | |
| * Return: true if error handling is required, false otherwise. | |
| */ | |
| static bool ufshcd_quirk_dl_nac_errors(struct ufs_hba *hba) | |
| { | |
| unsigned long flags; | |
| bool err_handling = true; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| /* | |
| * UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS only workaround the | |
| * device fatal error and/or DL NAC & REPLAY timeout errors. | |
| */ | |
| if (hba->saved_err & (CONTROLLER_FATAL_ERROR | SYSTEM_BUS_FATAL_ERROR)) | |
| goto out; | |
| if ((hba->saved_err & DEVICE_FATAL_ERROR) || | |
| ((hba->saved_err & UIC_ERROR) && | |
| (hba->saved_uic_err & UFSHCD_UIC_DL_TCx_REPLAY_ERROR))) | |
| goto out; | |
| if ((hba->saved_err & UIC_ERROR) && | |
| (hba->saved_uic_err & UFSHCD_UIC_DL_NAC_RECEIVED_ERROR)) { | |
| int err; | |
| /* | |
| * wait for 50ms to see if we can get any other errors or not. | |
| */ | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| msleep(50); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| /* | |
| * now check if we have got any other severe errors other than | |
| * DL NAC error? | |
| */ | |
| if ((hba->saved_err & INT_FATAL_ERRORS) || | |
| ((hba->saved_err & UIC_ERROR) && | |
| (hba->saved_uic_err & ~UFSHCD_UIC_DL_NAC_RECEIVED_ERROR))) | |
| goto out; | |
| /* | |
| * As DL NAC is the only error received so far, send out NOP | |
| * command to confirm if link is still active or not. | |
| * - If we don't get any response then do error recovery. | |
| * - If we get response then clear the DL NAC error bit. | |
| */ | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| err = ufshcd_verify_dev_init(hba); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (err) | |
| goto out; | |
| /* Link seems to be alive hence ignore the DL NAC errors */ | |
| if (hba->saved_uic_err == UFSHCD_UIC_DL_NAC_RECEIVED_ERROR) | |
| hba->saved_err &= ~UIC_ERROR; | |
| /* clear NAC error */ | |
| hba->saved_uic_err &= ~UFSHCD_UIC_DL_NAC_RECEIVED_ERROR; | |
| if (!hba->saved_uic_err) | |
| err_handling = false; | |
| } | |
| out: | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| return err_handling; | |
| } | |
| /* host lock must be held before calling this func */ | |
| static inline bool ufshcd_is_saved_err_fatal(struct ufs_hba *hba) | |
| { | |
| return (hba->saved_uic_err & UFSHCD_UIC_DL_PA_INIT_ERROR) || | |
| (hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)); | |
| } | |
| void ufshcd_schedule_eh_work(struct ufs_hba *hba) | |
| { | |
| lockdep_assert_held(hba->host->host_lock); | |
| /* handle fatal errors only when link is not in error state */ | |
| if (hba->ufshcd_state != UFSHCD_STATE_ERROR) { | |
| if (hba->force_reset || ufshcd_is_link_broken(hba) || | |
| ufshcd_is_saved_err_fatal(hba)) | |
| hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_FATAL; | |
| else | |
| hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_NON_FATAL; | |
| queue_work(hba->eh_wq, &hba->eh_work); | |
| } | |
| } | |
| void ufshcd_force_error_recovery(struct ufs_hba *hba) | |
| { | |
| spin_lock_irq(hba->host->host_lock); | |
| hba->force_reset = true; | |
| ufshcd_schedule_eh_work(hba); | |
| spin_unlock_irq(hba->host->host_lock); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_force_error_recovery); | |
| static void ufshcd_clk_scaling_allow(struct ufs_hba *hba, bool allow) | |
| { | |
| mutex_lock(&hba->wb_mutex); | |
| down_write(&hba->clk_scaling_lock); | |
| hba->clk_scaling.is_allowed = allow; | |
| up_write(&hba->clk_scaling_lock); | |
| mutex_unlock(&hba->wb_mutex); | |
| } | |
| static void ufshcd_clk_scaling_suspend(struct ufs_hba *hba, bool suspend) | |
| { | |
| if (suspend) { | |
| if (hba->clk_scaling.is_enabled) | |
| ufshcd_suspend_clkscaling(hba); | |
| ufshcd_clk_scaling_allow(hba, false); | |
| } else { | |
| ufshcd_clk_scaling_allow(hba, true); | |
| if (hba->clk_scaling.is_enabled) | |
| ufshcd_resume_clkscaling(hba); | |
| } | |
| } | |
| static void ufshcd_err_handling_prepare(struct ufs_hba *hba) | |
| { | |
| /* | |
| * A WLUN resume failure could potentially lead to the HBA being | |
| * runtime suspended, so take an extra reference on hba->dev. | |
| */ | |
| pm_runtime_get_sync(hba->dev); | |
| ufshcd_rpm_get_sync(hba); | |
| if (pm_runtime_status_suspended(&hba->ufs_device_wlun->sdev_gendev) || | |
| hba->is_sys_suspended) { | |
| enum ufs_pm_op pm_op; | |
| /* | |
| * Don't assume anything of resume, if | |
| * resume fails, irq and clocks can be OFF, and powers | |
| * can be OFF or in LPM. | |
| */ | |
| ufshcd_setup_hba_vreg(hba, true); | |
| ufshcd_enable_irq(hba); | |
| ufshcd_setup_vreg(hba, true); | |
| ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq); | |
| ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq2); | |
| ufshcd_hold(hba); | |
| if (!ufshcd_is_clkgating_allowed(hba)) | |
| ufshcd_setup_clocks(hba, true); | |
| pm_op = hba->is_sys_suspended ? UFS_SYSTEM_PM : UFS_RUNTIME_PM; | |
| ufshcd_vops_resume(hba, pm_op); | |
| } else { | |
| ufshcd_hold(hba); | |
| if (ufshcd_is_clkscaling_supported(hba) && | |
| hba->clk_scaling.is_enabled) | |
| ufshcd_suspend_clkscaling(hba); | |
| ufshcd_clk_scaling_allow(hba, false); | |
| } | |
| /* Wait for ongoing ufshcd_queuecommand() calls to finish. */ | |
| blk_mq_quiesce_tagset(&hba->host->tag_set); | |
| cancel_work_sync(&hba->eeh_work); | |
| } | |
| static void ufshcd_err_handling_unprepare(struct ufs_hba *hba) | |
| { | |
| blk_mq_unquiesce_tagset(&hba->host->tag_set); | |
| ufshcd_release(hba); | |
| if (ufshcd_is_clkscaling_supported(hba)) | |
| ufshcd_clk_scaling_suspend(hba, false); | |
| ufshcd_rpm_put(hba); | |
| pm_runtime_put(hba->dev); | |
| } | |
| static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba) | |
| { | |
| return (!hba->is_powered || hba->shutting_down || | |
| !hba->ufs_device_wlun || | |
| hba->ufshcd_state == UFSHCD_STATE_ERROR || | |
| (!(hba->saved_err || hba->saved_uic_err || hba->force_reset || | |
| ufshcd_is_link_broken(hba)))); | |
| } | |
| #ifdef CONFIG_PM | |
| static void ufshcd_recover_pm_error(struct ufs_hba *hba) | |
| { | |
| struct scsi_target *starget = hba->ufs_device_wlun->sdev_target; | |
| struct Scsi_Host *shost = hba->host; | |
| struct scsi_device *sdev; | |
| struct request_queue *q; | |
| bool resume_sdev_queues = false; | |
| hba->is_sys_suspended = false; | |
| /* | |
| * Ensure the parent's error status is cleared before proceeding | |
| * to the child, as the parent must be active to activate the child. | |
| */ | |
| if (hba->dev->power.runtime_error) { | |
| /* hba->dev has no functional parent thus simplily set RPM_ACTIVE */ | |
| pm_runtime_set_active(hba->dev); | |
| resume_sdev_queues = true; | |
| } | |
| if (hba->ufs_device_wlun->sdev_gendev.power.runtime_error) { | |
| /* | |
| * starget, parent of wlun, might be suspended if wlun resume failed. | |
| * Make sure parent is resumed before set child (wlun) active. | |
| */ | |
| pm_runtime_get_sync(&starget->dev); | |
| pm_runtime_set_active(&hba->ufs_device_wlun->sdev_gendev); | |
| pm_runtime_put_sync(&starget->dev); | |
| resume_sdev_queues = true; | |
| } | |
| /* | |
| * If wlun device had runtime error, we also need to resume those | |
| * consumer scsi devices in case any of them has failed to be | |
| * resumed due to supplier runtime resume failure. This is to unblock | |
| * blk_queue_enter in case there are bios waiting inside it. | |
| */ | |
| if (resume_sdev_queues) { | |
| shost_for_each_device(sdev, shost) { | |
| q = sdev->request_queue; | |
| if (q->dev && (q->rpm_status == RPM_SUSPENDED || | |
| q->rpm_status == RPM_SUSPENDING)) | |
| pm_request_resume(q->dev); | |
| } | |
| } | |
| } | |
| #else | |
| static inline void ufshcd_recover_pm_error(struct ufs_hba *hba) | |
| { | |
| } | |
| #endif | |
| static bool ufshcd_is_pwr_mode_restore_needed(struct ufs_hba *hba) | |
| { | |
| struct ufs_pa_layer_attr *pwr_info = &hba->pwr_info; | |
| u32 mode; | |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_PWRMODE), &mode); | |
| if (pwr_info->pwr_rx != ((mode >> PWRMODE_RX_OFFSET) & PWRMODE_MASK)) | |
| return true; | |
| if (pwr_info->pwr_tx != (mode & PWRMODE_MASK)) | |
| return true; | |
| return false; | |
| } | |
| static bool ufshcd_abort_one(struct request *rq, void *priv) | |
| { | |
| int *ret = priv; | |
| u32 tag = rq->tag; | |
| struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq); | |
| struct scsi_device *sdev = cmd->device; | |
| struct Scsi_Host *shost = sdev->host; | |
| struct ufs_hba *hba = shost_priv(shost); | |
| if (blk_mq_is_reserved_rq(rq)) | |
| return true; | |
| *ret = ufshcd_try_to_abort_task(hba, tag); | |
| dev_err(hba->dev, "Aborting tag %d / CDB %#02x %s\n", tag, | |
| ufshcd_is_scsi_cmd(cmd) ? cmd->cmnd[0] : -1, | |
| *ret ? "failed" : "succeeded"); | |
| return *ret == 0; | |
| } | |
| /** | |
| * ufshcd_abort_all - Abort all pending commands. | |
| * @hba: Host bus adapter pointer. | |
| * | |
| * Return: true if and only if the host controller needs to be reset. | |
| */ | |
| static bool ufshcd_abort_all(struct ufs_hba *hba) | |
| { | |
| int tag, ret = 0; | |
| blk_mq_tagset_busy_iter(&hba->host->tag_set, ufshcd_abort_one, &ret); | |
| if (ret) | |
| goto out; | |
| /* Clear pending task management requests */ | |
| for_each_set_bit(tag, &hba->outstanding_tasks, hba->nutmrs) { | |
| ret = ufshcd_clear_tm_cmd(hba, tag); | |
| if (ret) | |
| goto out; | |
| } | |
| out: | |
| /* Complete the requests that are cleared by s/w */ | |
| ufshcd_complete_requests(hba, false); | |
| return ret != 0; | |
| } | |
| /** | |
| * ufshcd_err_handler - handle UFS errors that require s/w attention | |
| * @work: pointer to work structure | |
| */ | |
| static void ufshcd_err_handler(struct work_struct *work) | |
| { | |
| int retries = MAX_ERR_HANDLER_RETRIES; | |
| struct ufs_hba *hba; | |
| unsigned long flags; | |
| bool needs_restore; | |
| bool needs_reset; | |
| int pmc_err; | |
| hba = container_of(work, struct ufs_hba, eh_work); | |
| dev_info(hba->dev, | |
| "%s started; HBA state %s; powered %d; shutting down %d; saved_err = 0x%x; saved_uic_err = 0x%x; force_reset = %d%s\n", | |
| __func__, ufshcd_state_name[hba->ufshcd_state], | |
| hba->is_powered, hba->shutting_down, hba->saved_err, | |
| hba->saved_uic_err, hba->force_reset, | |
| ufshcd_is_link_broken(hba) ? "; link is broken" : ""); | |
| if (hba->ufs_device_wlun) { | |
| /* | |
| * Use ufshcd_rpm_get_noresume() here to safely perform link | |
| * recovery even if an error occurs during runtime suspend or | |
| * runtime resume. This avoids potential deadlocks that could | |
| * happen if we tried to resume the device while a PM operation | |
| * is already in progress. | |
| */ | |
| ufshcd_rpm_get_noresume(hba); | |
| if (hba->pm_op_in_progress) { | |
| ufshcd_link_recovery(hba); | |
| ufshcd_rpm_put(hba); | |
| return; | |
| } | |
| ufshcd_rpm_put(hba); | |
| } | |
| down(&hba->host_sem); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (ufshcd_err_handling_should_stop(hba)) { | |
| if (hba->ufshcd_state != UFSHCD_STATE_ERROR) | |
| hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| up(&hba->host_sem); | |
| return; | |
| } | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| ufshcd_err_handling_prepare(hba); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| ufshcd_set_eh_in_progress(hba); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| /* Complete requests that have door-bell cleared by h/w */ | |
| ufshcd_complete_requests(hba, false); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| again: | |
| needs_restore = false; | |
| needs_reset = false; | |
| if (hba->ufshcd_state != UFSHCD_STATE_ERROR) | |
| hba->ufshcd_state = UFSHCD_STATE_RESET; | |
| /* | |
| * A full reset and restore might have happened after preparation | |
| * is finished, double check whether we should stop. | |
| */ | |
| if (ufshcd_err_handling_should_stop(hba)) | |
| goto skip_err_handling; | |
| if ((hba->dev_quirks & UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) && | |
| !hba->force_reset) { | |
| bool ret; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| /* release the lock as ufshcd_quirk_dl_nac_errors() may sleep */ | |
| ret = ufshcd_quirk_dl_nac_errors(hba); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (!ret && ufshcd_err_handling_should_stop(hba)) | |
| goto skip_err_handling; | |
| } | |
| if ((hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) || | |
| (hba->saved_uic_err && | |
| (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) { | |
| bool pr_prdt = !!(hba->saved_err & SYSTEM_BUS_FATAL_ERROR); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| ufshcd_print_host_state(hba); | |
| ufshcd_print_pwr_info(hba); | |
| ufshcd_print_tx_eq_params(hba); | |
| ufshcd_print_evt_hist(hba); | |
| ufshcd_print_tmrs(hba, hba->outstanding_tasks); | |
| ufshcd_print_trs_all(hba, pr_prdt); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| } | |
| /* | |
| * if host reset is required then skip clearing the pending | |
| * transfers forcefully because they will get cleared during | |
| * host reset and restore | |
| */ | |
| if (hba->force_reset || ufshcd_is_link_broken(hba) || | |
| ufshcd_is_saved_err_fatal(hba) || | |
| ((hba->saved_err & UIC_ERROR) && | |
| (hba->saved_uic_err & (UFSHCD_UIC_DL_NAC_RECEIVED_ERROR | | |
| UFSHCD_UIC_DL_TCx_REPLAY_ERROR)))) { | |
| needs_reset = true; | |
| goto do_reset; | |
| } | |
| /* | |
| * If LINERESET was caught, UFS might have been put to PWM mode, | |
| * check if power mode restore is needed. | |
| */ | |
| if (hba->saved_uic_err & UFSHCD_UIC_PA_GENERIC_ERROR) { | |
| hba->saved_uic_err &= ~UFSHCD_UIC_PA_GENERIC_ERROR; | |
| if (!hba->saved_uic_err) | |
| hba->saved_err &= ~UIC_ERROR; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| if (ufshcd_is_pwr_mode_restore_needed(hba)) | |
| needs_restore = true; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (!hba->saved_err && !needs_restore) | |
| goto skip_err_handling; | |
| } | |
| hba->silence_err_logs = true; | |
| /* release lock as clear command might sleep */ | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| needs_reset = ufshcd_abort_all(hba); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| hba->silence_err_logs = false; | |
| if (needs_reset) | |
| goto do_reset; | |
| /* | |
| * After all reqs and tasks are cleared from doorbell, | |
| * now it is safe to retore power mode. | |
| */ | |
| if (needs_restore) { | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| /* | |
| * Hold the scaling lock just in case dev cmds | |
| * are sent via bsg and/or sysfs. | |
| */ | |
| down_write(&hba->clk_scaling_lock); | |
| pmc_err = ufshcd_config_pwr_mode(hba, &hba->pwr_info, | |
| UFSHCD_PMC_POLICY_FORCE); | |
| if (pmc_err) { | |
| needs_reset = true; | |
| dev_err(hba->dev, "%s: Failed to restore power mode, err = %d\n", | |
| __func__, pmc_err); | |
| } | |
| ufshcd_print_pwr_info(hba); | |
| up_write(&hba->clk_scaling_lock); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| } | |
| do_reset: | |
| /* Fatal errors need reset */ | |
| if (needs_reset) { | |
| int err; | |
| hba->force_reset = false; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| err = ufshcd_reset_and_restore(hba); | |
| if (err) | |
| dev_err(hba->dev, "%s: reset and restore failed with err %d\n", | |
| __func__, err); | |
| else | |
| ufshcd_recover_pm_error(hba); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| } | |
| skip_err_handling: | |
| if (!needs_reset) { | |
| if (hba->ufshcd_state == UFSHCD_STATE_RESET) | |
| hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; | |
| if (hba->saved_err || hba->saved_uic_err) | |
| dev_err_ratelimited(hba->dev, "%s: exit: saved_err 0x%x saved_uic_err 0x%x", | |
| __func__, hba->saved_err, hba->saved_uic_err); | |
| } | |
| /* Exit in an operational state or dead */ | |
| if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL && | |
| hba->ufshcd_state != UFSHCD_STATE_ERROR) { | |
| if (--retries) | |
| goto again; | |
| hba->ufshcd_state = UFSHCD_STATE_ERROR; | |
| } | |
| ufshcd_clear_eh_in_progress(hba); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| ufshcd_err_handling_unprepare(hba); | |
| up(&hba->host_sem); | |
| dev_info(hba->dev, "%s finished; HBA state %s\n", __func__, | |
| ufshcd_state_name[hba->ufshcd_state]); | |
| } | |
| /** | |
| * ufshcd_update_uic_error - check and set fatal UIC error flags. | |
| * @hba: per-adapter instance | |
| * | |
| * Return: | |
| * IRQ_HANDLED - If interrupt is valid | |
| * IRQ_NONE - If invalid interrupt | |
| */ | |
| static irqreturn_t ufshcd_update_uic_error(struct ufs_hba *hba) | |
| { | |
| u32 reg; | |
| irqreturn_t retval = IRQ_NONE; | |
| /* PHY layer error */ | |
| reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER); | |
| if ((reg & UIC_PHY_ADAPTER_LAYER_ERROR) && | |
| (reg & UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK)) { | |
| ufshcd_update_evt_hist(hba, UFS_EVT_PA_ERR, reg); | |
| /* | |
| * To know whether this error is fatal or not, DB timeout | |
| * must be checked but this error is handled separately. | |
| */ | |
| if (reg & UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK) | |
| dev_dbg(hba->dev, "%s: UIC Lane error reported\n", | |
| __func__); | |
| /* Got a LINERESET indication. */ | |
| if (reg & UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR) { | |
| struct uic_command *cmd = NULL; | |
| hba->uic_error |= UFSHCD_UIC_PA_GENERIC_ERROR; | |
| if (hba->uic_async_done && hba->active_uic_cmd) | |
| cmd = hba->active_uic_cmd; | |
| /* | |
| * Ignore the LINERESET during power mode change | |
| * operation via DME_SET command. | |
| */ | |
| if (cmd && (cmd->command == UIC_CMD_DME_SET)) | |
| hba->uic_error &= ~UFSHCD_UIC_PA_GENERIC_ERROR; | |
| } | |
| retval |= IRQ_HANDLED; | |
| } | |
| /* PA_INIT_ERROR is fatal and needs UIC reset */ | |
| reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DATA_LINK_LAYER); | |
| if ((reg & UIC_DATA_LINK_LAYER_ERROR) && | |
| (reg & UIC_DATA_LINK_LAYER_ERROR_CODE_MASK)) { | |
| ufshcd_update_evt_hist(hba, UFS_EVT_DL_ERR, reg); | |
| if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT) | |
| hba->uic_error |= UFSHCD_UIC_DL_PA_INIT_ERROR; | |
| else if (hba->dev_quirks & | |
| UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) { | |
| if (reg & UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED) | |
| hba->uic_error |= | |
| UFSHCD_UIC_DL_NAC_RECEIVED_ERROR; | |
| else if (reg & UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT) | |
| hba->uic_error |= UFSHCD_UIC_DL_TCx_REPLAY_ERROR; | |
| } | |
| retval |= IRQ_HANDLED; | |
| } | |
| /* UIC NL/TL/DME errors needs software retry */ | |
| reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_NETWORK_LAYER); | |
| if ((reg & UIC_NETWORK_LAYER_ERROR) && | |
| (reg & UIC_NETWORK_LAYER_ERROR_CODE_MASK)) { | |
| ufshcd_update_evt_hist(hba, UFS_EVT_NL_ERR, reg); | |
| hba->uic_error |= UFSHCD_UIC_NL_ERROR; | |
| retval |= IRQ_HANDLED; | |
| } | |
| reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_TRANSPORT_LAYER); | |
| if ((reg & UIC_TRANSPORT_LAYER_ERROR) && | |
| (reg & UIC_TRANSPORT_LAYER_ERROR_CODE_MASK)) { | |
| ufshcd_update_evt_hist(hba, UFS_EVT_TL_ERR, reg); | |
| hba->uic_error |= UFSHCD_UIC_TL_ERROR; | |
| retval |= IRQ_HANDLED; | |
| } | |
| reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DME); | |
| if (reg & UIC_DME_ERROR) { | |
| ufshcd_update_evt_hist(hba, UFS_EVT_DME_ERR, reg); | |
| if (reg & UIC_DME_ERROR_CODE_MASK) | |
| hba->uic_error |= UFSHCD_UIC_DME_ERROR; | |
| if (reg & UIC_DME_QOS_MASK) { | |
| atomic_set(&hba->dme_qos_notification, | |
| reg & UIC_DME_QOS_MASK); | |
| if (hba->dme_qos_sysfs_handle) | |
| sysfs_notify_dirent(hba->dme_qos_sysfs_handle); | |
| } | |
| retval |= IRQ_HANDLED; | |
| } | |
| dev_dbg(hba->dev, "%s: UIC error flags = 0x%08x\n", | |
| __func__, hba->uic_error); | |
| return retval; | |
| } | |
| /** | |
| * ufshcd_check_errors - Check for errors that need s/w attention | |
| * @hba: per-adapter instance | |
| * @intr_status: interrupt status generated by the controller | |
| * | |
| * Return: | |
| * IRQ_HANDLED - If interrupt is valid | |
| * IRQ_NONE - If invalid interrupt | |
| */ | |
| static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status) | |
| { | |
| bool queue_eh_work = false; | |
| irqreturn_t retval = IRQ_NONE; | |
| guard(spinlock_irqsave)(hba->host->host_lock); | |
| hba->errors |= UFSHCD_ERROR_MASK & intr_status; | |
| if (hba->errors & INT_FATAL_ERRORS) { | |
| ufshcd_update_evt_hist(hba, UFS_EVT_FATAL_ERR, | |
| hba->errors); | |
| queue_eh_work = true; | |
| } | |
| if (hba->errors & UIC_ERROR) { | |
| hba->uic_error = 0; | |
| retval = ufshcd_update_uic_error(hba); | |
| if (hba->uic_error) | |
| queue_eh_work = true; | |
| } | |
| if (hba->errors & UFSHCD_UIC_HIBERN8_MASK) { | |
| dev_err(hba->dev, | |
| "%s: Auto Hibern8 %s failed - status: 0x%08x, upmcrs: 0x%08x\n", | |
| __func__, (hba->errors & UIC_HIBERNATE_ENTER) ? | |
| "Enter" : "Exit", | |
| hba->errors, ufshcd_get_upmcrs(hba)); | |
| ufshcd_update_evt_hist(hba, UFS_EVT_AUTO_HIBERN8_ERR, | |
| hba->errors); | |
| ufshcd_set_link_broken(hba); | |
| queue_eh_work = true; | |
| } | |
| if (queue_eh_work) { | |
| /* | |
| * update the transfer error masks to sticky bits, let's do this | |
| * irrespective of current ufshcd_state. | |
| */ | |
| hba->saved_err |= hba->errors; | |
| hba->saved_uic_err |= hba->uic_error; | |
| /* dump controller state before resetting */ | |
| if ((hba->saved_err & | |
| (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) || | |
| (hba->saved_uic_err && | |
| (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) { | |
| dev_err(hba->dev, "%s: saved_err 0x%x saved_uic_err 0x%x\n", | |
| __func__, hba->saved_err, | |
| hba->saved_uic_err); | |
| ufshcd_dump_regs(hba, 0, UFSHCI_REG_SPACE_SIZE, | |
| "host_regs: "); | |
| ufshcd_print_pwr_info(hba); | |
| ufshcd_print_tx_eq_params(hba); | |
| } | |
| ufshcd_schedule_eh_work(hba); | |
| retval |= IRQ_HANDLED; | |
| } | |
| /* | |
| * if (!queue_eh_work) - | |
| * Other errors are either non-fatal where host recovers | |
| * itself without s/w intervention or errors that will be | |
| * handled by the SCSI core layer. | |
| */ | |
| hba->errors = 0; | |
| hba->uic_error = 0; | |
| return retval; | |
| } | |
| /** | |
| * ufshcd_tmc_handler - handle task management function completion | |
| * @hba: per adapter instance | |
| * | |
| * Return: | |
| * IRQ_HANDLED - If interrupt is valid | |
| * IRQ_NONE - If invalid interrupt | |
| */ | |
| static irqreturn_t ufshcd_tmc_handler(struct ufs_hba *hba) | |
| { | |
| unsigned long flags, pending, issued; | |
| irqreturn_t ret = IRQ_NONE; | |
| int tag; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| pending = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL); | |
| issued = hba->outstanding_tasks & ~pending; | |
| for_each_set_bit(tag, &issued, hba->nutmrs) { | |
| struct request *req = hba->tmf_rqs[tag]; | |
| struct completion *c = req->end_io_data; | |
| complete(c); | |
| ret = IRQ_HANDLED; | |
| } | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_handle_mcq_cq_events - handle MCQ completion queue events | |
| * @hba: per adapter instance | |
| * @reset_iag: true, to reset MCQ IAG counter and timer of the CQ | |
| * | |
| * Return: IRQ_HANDLED if interrupt is handled. | |
| */ | |
| static irqreturn_t ufshcd_handle_mcq_cq_events(struct ufs_hba *hba, bool reset_iag) | |
| { | |
| struct ufs_hw_queue *hwq; | |
| unsigned long outstanding_cqs; | |
| unsigned int nr_queues; | |
| int i, ret; | |
| u32 events, reg; | |
| ret = ufshcd_vops_get_outstanding_cqs(hba, &outstanding_cqs); | |
| if (ret) | |
| outstanding_cqs = (1ULL << hba->nr_hw_queues) - 1; | |
| /* Exclude the poll queues */ | |
| nr_queues = hba->nr_hw_queues - hba->nr_queues[HCTX_TYPE_POLL]; | |
| for_each_set_bit(i, &outstanding_cqs, nr_queues) { | |
| hwq = &hba->uhq[i]; | |
| events = ufshcd_mcq_read_cqis(hba, i); | |
| if (events) | |
| ufshcd_mcq_write_cqis(hba, events, i); | |
| if (reset_iag) { | |
| reg = ufshcd_mcq_read_mcqiacr(hba, i); | |
| reg |= INT_AGGR_COUNTER_AND_TIMER_RESET; | |
| ufshcd_mcq_write_mcqiacr(hba, reg, i); | |
| } | |
| if (events & UFSHCD_MCQ_CQIS_TAIL_ENT_PUSH_STS) | |
| ufshcd_mcq_poll_cqe_lock(hba, hwq); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * ufshcd_sl_intr - Interrupt service routine | |
| * @hba: per adapter instance | |
| * @intr_status: contains interrupts generated by the controller | |
| * | |
| * Return: | |
| * IRQ_HANDLED - If interrupt is valid | |
| * IRQ_NONE - If invalid interrupt | |
| */ | |
| static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) | |
| { | |
| irqreturn_t retval = IRQ_NONE; | |
| if (intr_status & UFSHCD_UIC_MASK) | |
| retval |= ufshcd_uic_cmd_compl(hba, intr_status); | |
| if (intr_status & UFSHCD_ERROR_MASK || hba->errors) | |
| retval |= ufshcd_check_errors(hba, intr_status); | |
| if (intr_status & UTP_TASK_REQ_COMPL) | |
| retval |= ufshcd_tmc_handler(hba); | |
| if (intr_status & UTP_TRANSFER_REQ_COMPL) | |
| retval |= ufshcd_transfer_req_compl(hba); | |
| if (intr_status & MCQ_CQ_EVENT_STATUS) | |
| retval |= ufshcd_handle_mcq_cq_events(hba, false); | |
| if (intr_status & MCQ_IAG_EVENT_STATUS) | |
| retval |= ufshcd_handle_mcq_cq_events(hba, true); | |
| return retval; | |
| } | |
| /** | |
| * ufshcd_intr - Main interrupt service routine | |
| * @irq: irq number | |
| * @__hba: pointer to adapter instance | |
| * | |
| * Return: | |
| * IRQ_HANDLED - If interrupt is valid | |
| * IRQ_NONE - If invalid interrupt | |
| */ | |
| static irqreturn_t ufshcd_intr(int irq, void *__hba) | |
| { | |
| u32 last_intr_status, intr_status, enabled_intr_status = 0; | |
| irqreturn_t retval = IRQ_NONE; | |
| struct ufs_hba *hba = __hba; | |
| int retries = hba->nutrs; | |
| last_intr_status = intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); | |
| /* | |
| * There could be max of hba->nutrs reqs in flight and in worst case | |
| * if the reqs get finished 1 by 1 after the interrupt status is | |
| * read, make sure we handle them by checking the interrupt status | |
| * again in a loop until we process all of the reqs before returning. | |
| */ | |
| while (intr_status && retries--) { | |
| enabled_intr_status = | |
| intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); | |
| ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); | |
| if (enabled_intr_status) | |
| retval |= ufshcd_sl_intr(hba, enabled_intr_status); | |
| intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); | |
| } | |
| if (enabled_intr_status && retval == IRQ_NONE && | |
| (!(enabled_intr_status & UTP_TRANSFER_REQ_COMPL) || | |
| hba->outstanding_reqs) && !ufshcd_eh_in_progress(hba)) { | |
| dev_err(hba->dev, "%s: Unhandled interrupt 0x%08x (0x%08x, 0x%08x)\n", | |
| __func__, | |
| intr_status, | |
| last_intr_status, | |
| enabled_intr_status); | |
| ufshcd_dump_regs(hba, 0, UFSHCI_REG_SPACE_SIZE, "host_regs: "); | |
| } | |
| return retval; | |
| } | |
| static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag) | |
| { | |
| int err = 0; | |
| u32 mask = 1 << tag; | |
| if (!test_bit(tag, &hba->outstanding_tasks)) | |
| goto out; | |
| ufshcd_utmrl_clear(hba, tag); | |
| /* poll for max. 1 sec to clear door bell register by h/w */ | |
| err = ufshcd_wait_for_register(hba, | |
| REG_UTP_TASK_REQ_DOOR_BELL, | |
| mask, 0, 1000, 1000); | |
| dev_err(hba->dev, "Clearing task management function with tag %d %s\n", | |
| tag, err < 0 ? "failed" : "succeeded"); | |
| out: | |
| return err; | |
| } | |
| static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba, | |
| struct utp_task_req_desc *treq, u8 tm_function) | |
| { | |
| struct request_queue *q = hba->tmf_queue; | |
| struct Scsi_Host *host = hba->host; | |
| DECLARE_COMPLETION_ONSTACK(wait); | |
| struct request *req; | |
| unsigned long flags; | |
| int task_tag, err; | |
| /* | |
| * blk_mq_alloc_request() is used here only to get a free tag. | |
| */ | |
| req = blk_mq_alloc_request(q, REQ_OP_DRV_OUT, 0); | |
| if (IS_ERR(req)) | |
| return PTR_ERR(req); | |
| req->end_io_data = &wait; | |
| ufshcd_hold(hba); | |
| spin_lock_irqsave(host->host_lock, flags); | |
| task_tag = req->tag; | |
| hba->tmf_rqs[req->tag] = req; | |
| treq->upiu_req.req_header.task_tag = task_tag; | |
| memcpy(hba->utmrdl_base_addr + task_tag, treq, sizeof(*treq)); | |
| ufshcd_vops_setup_task_mgmt(hba, task_tag, tm_function); | |
| __set_bit(task_tag, &hba->outstanding_tasks); | |
| spin_unlock_irqrestore(host->host_lock, flags); | |
| /* send command to the controller */ | |
| ufshcd_writel(hba, 1 << task_tag, REG_UTP_TASK_REQ_DOOR_BELL); | |
| ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_SEND); | |
| /* wait until the task management command is completed */ | |
| err = wait_for_completion_io_timeout(&wait, | |
| msecs_to_jiffies(TM_CMD_TIMEOUT)); | |
| if (!err) { | |
| ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_ERR); | |
| dev_err(hba->dev, "%s: task management cmd 0x%.2x timed-out\n", | |
| __func__, tm_function); | |
| if (ufshcd_clear_tm_cmd(hba, task_tag)) | |
| dev_WARN(hba->dev, "%s: unable to clear tm cmd (slot %d) after timeout\n", | |
| __func__, task_tag); | |
| err = -ETIMEDOUT; | |
| } else { | |
| err = 0; | |
| memcpy(treq, hba->utmrdl_base_addr + task_tag, sizeof(*treq)); | |
| ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_COMP); | |
| } | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| hba->tmf_rqs[req->tag] = NULL; | |
| __clear_bit(task_tag, &hba->outstanding_tasks); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| ufshcd_release(hba); | |
| blk_mq_free_request(req); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_issue_tm_cmd - issues task management commands to controller | |
| * @hba: per adapter instance | |
| * @lun_id: LUN ID to which TM command is sent | |
| * @task_id: task ID to which the TM command is applicable | |
| * @tm_function: task management function opcode | |
| * @tm_response: task management service response return value | |
| * | |
| * Return: non-zero value on error, zero on success. | |
| */ | |
| static int ufshcd_issue_tm_cmd(struct ufs_hba *hba, int lun_id, int task_id, | |
| u8 tm_function, u8 *tm_response) | |
| { | |
| struct utp_task_req_desc treq = { }; | |
| enum utp_ocs ocs_value; | |
| int err; | |
| /* Configure task request descriptor */ | |
| treq.header.interrupt = 1; | |
| treq.header.ocs = OCS_INVALID_COMMAND_STATUS; | |
| /* Configure task request UPIU */ | |
| treq.upiu_req.req_header.transaction_code = UPIU_TRANSACTION_TASK_REQ; | |
| treq.upiu_req.req_header.lun = lun_id; | |
| treq.upiu_req.req_header.tm_function = tm_function; | |
| /* | |
| * The host shall provide the same value for LUN field in the basic | |
| * header and for Input Parameter. | |
| */ | |
| treq.upiu_req.input_param1 = cpu_to_be32(lun_id); | |
| treq.upiu_req.input_param2 = cpu_to_be32(task_id); | |
| err = __ufshcd_issue_tm_cmd(hba, &treq, tm_function); | |
| if (err == -ETIMEDOUT) | |
| return err; | |
| ocs_value = treq.header.ocs & MASK_OCS; | |
| if (ocs_value != OCS_SUCCESS) | |
| dev_err(hba->dev, "%s: failed, ocs = 0x%x\n", | |
| __func__, ocs_value); | |
| else if (tm_response) | |
| *tm_response = be32_to_cpu(treq.upiu_rsp.output_param1) & | |
| MASK_TM_SERVICE_RESP; | |
| return err; | |
| } | |
| /** | |
| * ufshcd_issue_devman_upiu_cmd - API for sending "utrd" type requests | |
| * @hba: per-adapter instance | |
| * @req_upiu: upiu request | |
| * @rsp_upiu: upiu reply | |
| * @desc_buff: pointer to descriptor buffer, NULL if NA | |
| * @buff_len: descriptor size, 0 if NA | |
| * @cmd_type: specifies the type (NOP, Query...) | |
| * @desc_op: descriptor operation | |
| * | |
| * Those type of requests uses UTP Transfer Request Descriptor - utrd. | |
| * Therefore, it "rides" the device management infrastructure: uses its tag and | |
| * tasks work queues. | |
| * | |
| * Since there is only one available tag for device management commands, | |
| * the caller is expected to hold the hba->dev_cmd.lock mutex. | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba, | |
| struct utp_upiu_req *req_upiu, | |
| struct utp_upiu_req *rsp_upiu, | |
| u8 *desc_buff, int *buff_len, | |
| enum dev_cmd_type cmd_type, | |
| enum query_opcode desc_op) | |
| { | |
| struct scsi_cmnd *cmd = ufshcd_get_dev_mgmt_cmd(hba); | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| u32 tag; | |
| int err = 0; | |
| u8 upiu_flags; | |
| /* Protects use of hba->dev_cmd. */ | |
| lockdep_assert_held(&hba->dev_cmd.lock); | |
| if (WARN_ON_ONCE(!cmd)) | |
| return -ENOMEM; | |
| tag = scsi_cmd_to_rq(cmd)->tag; | |
| ufshcd_setup_dev_cmd(hba, cmd, cmd_type, 0, tag); | |
| ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE, 0); | |
| /* update the task tag in the request upiu */ | |
| req_upiu->header.task_tag = tag; | |
| /* just copy the upiu request as it is */ | |
| memcpy(lrbp->ucd_req_ptr, req_upiu, sizeof(*lrbp->ucd_req_ptr)); | |
| if (desc_buff && desc_op == UPIU_QUERY_OPCODE_WRITE_DESC) { | |
| /* The Data Segment Area is optional depending upon the query | |
| * function value. for WRITE DESCRIPTOR, the data segment | |
| * follows right after the tsf. | |
| */ | |
| memcpy(lrbp->ucd_req_ptr + 1, desc_buff, *buff_len); | |
| *buff_len = 0; | |
| } | |
| memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); | |
| err = ufshcd_issue_dev_cmd(hba, cmd, tag, dev_cmd_timeout); | |
| if (err) | |
| goto put_dev_mgmt_cmd; | |
| /* just copy the upiu response as it is */ | |
| memcpy(rsp_upiu, lrbp->ucd_rsp_ptr, sizeof(*rsp_upiu)); | |
| if (desc_buff && (desc_op == UPIU_QUERY_OPCODE_READ_DESC || | |
| desc_op == UPIU_QUERY_OPCODE_AGGREGATED_READ)) { | |
| u8 *descp = (u8 *)lrbp->ucd_rsp_ptr + sizeof(*rsp_upiu); | |
| u16 resp_len = be16_to_cpu(lrbp->ucd_rsp_ptr->header | |
| .data_segment_length); | |
| if (*buff_len >= resp_len) { | |
| memcpy(desc_buff, descp, resp_len); | |
| *buff_len = resp_len; | |
| } else { | |
| dev_warn(hba->dev, | |
| "%s: rsp size %d is bigger than buffer size %d", | |
| __func__, resp_len, *buff_len); | |
| *buff_len = 0; | |
| err = -EINVAL; | |
| } | |
| } | |
| put_dev_mgmt_cmd: | |
| ufshcd_put_dev_mgmt_cmd(cmd); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_exec_raw_upiu_cmd - API function for sending raw upiu commands | |
| * @hba: per-adapter instance | |
| * @req_upiu: upiu request | |
| * @rsp_upiu: upiu reply - only 8 DW as we do not support scsi commands | |
| * @msgcode: message code, one of UPIU Transaction Codes Initiator to Target | |
| * @desc_buff: pointer to descriptor buffer, NULL if NA | |
| * @buff_len: descriptor size, 0 if NA | |
| * @desc_op: descriptor operation | |
| * | |
| * Supports UTP Transfer requests (nop and query), and UTP Task | |
| * Management requests. | |
| * It is up to the caller to fill the upiu conent properly, as it will | |
| * be copied without any further input validations. | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba, | |
| struct utp_upiu_req *req_upiu, | |
| struct utp_upiu_req *rsp_upiu, | |
| enum upiu_request_transaction msgcode, | |
| u8 *desc_buff, int *buff_len, | |
| enum query_opcode desc_op) | |
| { | |
| int err; | |
| enum dev_cmd_type cmd_type = DEV_CMD_TYPE_QUERY; | |
| struct utp_task_req_desc treq = { }; | |
| enum utp_ocs ocs_value; | |
| u8 tm_f = req_upiu->header.tm_function; | |
| switch (msgcode) { | |
| case UPIU_TRANSACTION_NOP_OUT: | |
| cmd_type = DEV_CMD_TYPE_NOP; | |
| fallthrough; | |
| case UPIU_TRANSACTION_QUERY_REQ: | |
| ufshcd_dev_man_lock(hba); | |
| err = ufshcd_issue_devman_upiu_cmd(hba, req_upiu, rsp_upiu, | |
| desc_buff, buff_len, | |
| cmd_type, desc_op); | |
| ufshcd_dev_man_unlock(hba); | |
| break; | |
| case UPIU_TRANSACTION_TASK_REQ: | |
| treq.header.interrupt = 1; | |
| treq.header.ocs = OCS_INVALID_COMMAND_STATUS; | |
| memcpy(&treq.upiu_req, req_upiu, sizeof(*req_upiu)); | |
| err = __ufshcd_issue_tm_cmd(hba, &treq, tm_f); | |
| if (err == -ETIMEDOUT) | |
| break; | |
| ocs_value = treq.header.ocs & MASK_OCS; | |
| if (ocs_value != OCS_SUCCESS) { | |
| dev_err(hba->dev, "%s: failed, ocs = 0x%x\n", __func__, | |
| ocs_value); | |
| break; | |
| } | |
| memcpy(rsp_upiu, &treq.upiu_rsp, sizeof(*rsp_upiu)); | |
| break; | |
| default: | |
| err = -EINVAL; | |
| break; | |
| } | |
| return err; | |
| } | |
| /** | |
| * ufshcd_advanced_rpmb_req_handler - handle advanced RPMB request | |
| * @hba: per adapter instance | |
| * @req_upiu: upiu request | |
| * @rsp_upiu: upiu reply | |
| * @req_ehs: EHS field which contains Advanced RPMB Request Message | |
| * @rsp_ehs: EHS field which returns Advanced RPMB Response Message | |
| * @sg_cnt: The number of sg lists actually used | |
| * @sg_list: Pointer to SG list when DATA IN/OUT UPIU is required in ARPMB operation | |
| * @dir: DMA direction | |
| * | |
| * Return: 0 upon success; > 0 in case the UFS device reported an OCS error; | |
| * < 0 if another error occurred. | |
| */ | |
| int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct utp_upiu_req *req_upiu, | |
| struct utp_upiu_req *rsp_upiu, struct ufs_ehs *req_ehs, | |
| struct ufs_ehs *rsp_ehs, int sg_cnt, struct scatterlist *sg_list, | |
| enum dma_data_direction dir) | |
| { | |
| struct scsi_cmnd *cmd; | |
| struct ufshcd_lrb *lrbp; | |
| u32 tag; | |
| int err = 0; | |
| int result; | |
| u8 upiu_flags; | |
| u8 *ehs_data; | |
| u16 ehs_len; | |
| int ehs = (hba->capabilities & MASK_EHSLUTRD_SUPPORTED) ? 2 : 0; | |
| ufshcd_dev_man_lock(hba); | |
| cmd = ufshcd_get_dev_mgmt_cmd(hba); | |
| if (WARN_ON_ONCE(!cmd)) { | |
| err = -ENOMEM; | |
| goto unlock; | |
| } | |
| lrbp = scsi_cmd_priv(cmd); | |
| tag = scsi_cmd_to_rq(cmd)->tag; | |
| ufshcd_setup_dev_cmd(hba, cmd, DEV_CMD_TYPE_RPMB, UFS_UPIU_RPMB_WLUN, | |
| tag); | |
| ufshcd_prepare_req_desc_hdr(hba, lrbp, &upiu_flags, DMA_NONE, ehs); | |
| /* update the task tag */ | |
| req_upiu->header.task_tag = tag; | |
| /* copy the UPIU(contains CDB) request as it is */ | |
| memcpy(lrbp->ucd_req_ptr, req_upiu, sizeof(*lrbp->ucd_req_ptr)); | |
| /* Copy EHS, starting with byte32, immediately after the CDB package */ | |
| memcpy(lrbp->ucd_req_ptr + 1, req_ehs, sizeof(*req_ehs)); | |
| if (dir != DMA_NONE && sg_list) | |
| ufshcd_sgl_to_prdt(hba, lrbp, sg_cnt, sg_list); | |
| memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); | |
| err = ufshcd_issue_dev_cmd(hba, cmd, tag, ADVANCED_RPMB_REQ_TIMEOUT); | |
| if (err) | |
| goto put_dev_mgmt_cmd; | |
| err = ufshcd_dev_cmd_completion(hba, lrbp); | |
| if (!err) { | |
| /* Just copy the upiu response as it is */ | |
| memcpy(rsp_upiu, lrbp->ucd_rsp_ptr, sizeof(*rsp_upiu)); | |
| /* Get the response UPIU result */ | |
| result = (lrbp->ucd_rsp_ptr->header.response << 8) | | |
| lrbp->ucd_rsp_ptr->header.status; | |
| ehs_len = lrbp->ucd_rsp_ptr->header.ehs_length; | |
| /* | |
| * Since the bLength in EHS indicates the total size of the EHS Header and EHS Data | |
| * in 32 Byte units, the value of the bLength Request/Response for Advanced RPMB | |
| * Message is 02h | |
| */ | |
| if (ehs_len == 2 && rsp_ehs) { | |
| /* EHS data starts from byte32 of the devman UCD response area. */ | |
| ehs_data = (u8 *)lrbp->ucd_rsp_ptr + EHS_OFFSET_IN_RESPONSE; | |
| memcpy(rsp_ehs, ehs_data, ehs_len * 32); | |
| } | |
| } | |
| put_dev_mgmt_cmd: | |
| ufshcd_put_dev_mgmt_cmd(cmd); | |
| unlock: | |
| ufshcd_dev_man_unlock(hba); | |
| return err ? : result; | |
| } | |
| static bool ufshcd_clear_lu_cmds(struct request *req, void *priv) | |
| { | |
| struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); | |
| struct scsi_device *sdev = cmd->device; | |
| struct Scsi_Host *shost = sdev->host; | |
| struct ufs_hba *hba = shost_priv(shost); | |
| const u64 lun = *(u64 *)priv; | |
| const u32 tag = req->tag; | |
| if (blk_mq_is_reserved_rq(req) || sdev->lun != lun) | |
| return true; | |
| if (ufshcd_clear_cmd(hba, tag) < 0) { | |
| dev_err(hba->dev, "%s: failed to clear request %d\n", __func__, | |
| tag); | |
| return true; | |
| } | |
| if (hba->mcq_enabled) { | |
| struct ufs_hw_queue *hwq = ufshcd_mcq_req_to_hwq(hba, req); | |
| if (hwq) | |
| ufshcd_mcq_poll_cqe_lock(hba, hwq); | |
| return true; | |
| } | |
| ufshcd_compl_one_cqe(hba, tag, NULL); | |
| return true; | |
| } | |
| /** | |
| * ufshcd_eh_device_reset_handler() - Reset a single logical unit. | |
| * @cmd: SCSI command pointer | |
| * | |
| * Return: SUCCESS or FAILED. | |
| */ | |
| static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) | |
| { | |
| struct Scsi_Host *host; | |
| struct ufs_hba *hba; | |
| int err; | |
| u8 resp = 0xF, lun; | |
| host = cmd->device->host; | |
| hba = shost_priv(host); | |
| lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun); | |
| err = ufshcd_issue_tm_cmd(hba, lun, 0, UFS_LOGICAL_RESET, &resp); | |
| if (err) { | |
| } else if (resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) { | |
| err = resp; | |
| } else { | |
| /* clear the commands that were pending for corresponding LUN */ | |
| blk_mq_tagset_busy_iter(&hba->host->tag_set, | |
| ufshcd_clear_lu_cmds, | |
| &cmd->device->lun); | |
| } | |
| hba->req_abort_count = 0; | |
| ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, (u32)err); | |
| if (!err) { | |
| err = SUCCESS; | |
| } else { | |
| dev_err(hba->dev, "%s: failed with err %d\n", __func__, err); | |
| err = FAILED; | |
| } | |
| return err; | |
| } | |
| static void ufshcd_set_req_abort_skip(struct ufs_hba *hba, unsigned long bitmap) | |
| { | |
| int tag; | |
| for_each_set_bit(tag, &bitmap, hba->nutrs) { | |
| struct scsi_cmnd *cmd = ufshcd_tag_to_cmd(hba, tag); | |
| struct ufshcd_lrb *lrbp; | |
| if (!cmd) | |
| continue; | |
| lrbp = scsi_cmd_priv(cmd); | |
| lrbp->req_abort_skip = true; | |
| } | |
| } | |
| /** | |
| * ufshcd_try_to_abort_task - abort a specific task | |
| * @hba: Pointer to adapter instance | |
| * @tag: Tag of the task to be aborted | |
| * | |
| * Abort the pending command in device by sending UFS_ABORT_TASK task management | |
| * command, and in host controller by clearing the door-bell register. There can | |
| * be race between controller sending the command to the device while abort is | |
| * issued. To avoid that, first issue UFS_QUERY_TASK to check if the command is | |
| * really issued and then try to abort it. | |
| * | |
| * Return: zero on success, non-zero on failure. | |
| */ | |
| int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag) | |
| { | |
| struct scsi_cmnd *cmd = ufshcd_tag_to_cmd(hba, tag); | |
| struct ufshcd_lrb *lrbp; | |
| int err; | |
| int poll_cnt; | |
| u8 resp = 0xF; | |
| if (!cmd) | |
| return -EINVAL; | |
| lrbp = scsi_cmd_priv(cmd); | |
| for (poll_cnt = 100; poll_cnt; poll_cnt--) { | |
| err = ufshcd_issue_tm_cmd(hba, lrbp->lun, tag, UFS_QUERY_TASK, | |
| &resp); | |
| if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) { | |
| /* cmd pending in the device */ | |
| dev_err(hba->dev, "%s: cmd pending in the device. tag = %d\n", | |
| __func__, tag); | |
| break; | |
| } else if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_COMPL) { | |
| /* | |
| * cmd not pending in the device, check if it is | |
| * in transition. | |
| */ | |
| dev_info( | |
| hba->dev, | |
| "%s: cmd with tag %d not pending in the device.\n", | |
| __func__, tag); | |
| if (!ufshcd_cmd_inflight(cmd)) { | |
| dev_info(hba->dev, | |
| "%s: cmd with tag=%d completed.\n", | |
| __func__, tag); | |
| return 0; | |
| } | |
| usleep_range(100, 200); | |
| } else { | |
| dev_err(hba->dev, | |
| "%s: no response from device. tag = %d, err %d\n", | |
| __func__, tag, err); | |
| return err ? : resp; | |
| } | |
| } | |
| if (!poll_cnt) | |
| return -EBUSY; | |
| err = ufshcd_issue_tm_cmd(hba, lrbp->lun, tag, UFS_ABORT_TASK, &resp); | |
| if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) { | |
| if (!err) { | |
| err = resp; /* service response error */ | |
| dev_err(hba->dev, "%s: issued. tag = %d, err %d\n", | |
| __func__, tag, err); | |
| } | |
| return err; | |
| } | |
| err = ufshcd_clear_cmd(hba, tag); | |
| if (err) | |
| dev_err(hba->dev, "%s: Failed clearing cmd at tag %d, err %d\n", | |
| __func__, tag, err); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_abort - scsi host template eh_abort_handler callback | |
| * @cmd: SCSI command pointer | |
| * | |
| * Return: SUCCESS or FAILED. | |
| */ | |
| static int ufshcd_abort(struct scsi_cmnd *cmd) | |
| { | |
| struct Scsi_Host *host = cmd->device->host; | |
| struct ufs_hba *hba = shost_priv(host); | |
| struct request *rq = scsi_cmd_to_rq(cmd); | |
| int tag = rq->tag; | |
| struct ufshcd_lrb *lrbp = scsi_cmd_priv(cmd); | |
| unsigned long flags; | |
| int err = FAILED; | |
| bool outstanding; | |
| u32 reg; | |
| ufshcd_hold(hba); | |
| if (!hba->mcq_enabled) { | |
| reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); | |
| if (!test_bit(tag, &hba->outstanding_reqs)) { | |
| /* If command is already aborted/completed, return FAILED. */ | |
| dev_err(hba->dev, | |
| "%s: cmd at tag %d already completed, outstanding=0x%lx, doorbell=0x%x\n", | |
| __func__, tag, hba->outstanding_reqs, reg); | |
| goto release; | |
| } | |
| } | |
| /* Print Transfer Request of aborted task */ | |
| dev_info(hba->dev, "%s: Device abort task at tag %d\n", __func__, tag); | |
| /* | |
| * Print detailed info about aborted request. | |
| * As more than one request might get aborted at the same time, | |
| * print full information only for the first aborted request in order | |
| * to reduce repeated printouts. For other aborted requests only print | |
| * basic details. | |
| */ | |
| if (ufshcd_is_scsi_cmd(cmd)) | |
| scsi_print_command(cmd); | |
| if (!hba->req_abort_count) { | |
| ufshcd_update_evt_hist(hba, UFS_EVT_ABORT, tag); | |
| ufshcd_print_evt_hist(hba); | |
| ufshcd_print_host_state(hba); | |
| ufshcd_print_pwr_info(hba); | |
| ufshcd_print_tx_eq_params(hba); | |
| ufshcd_print_tr(hba, cmd, true); | |
| } else { | |
| ufshcd_print_tr(hba, cmd, false); | |
| } | |
| hba->req_abort_count++; | |
| if (!hba->mcq_enabled && !(reg & (1 << tag))) { | |
| /* only execute this code in single doorbell mode */ | |
| dev_err(hba->dev, | |
| "%s: cmd was completed, but without a notifying intr, tag = %d", | |
| __func__, tag); | |
| __ufshcd_transfer_req_compl(hba, 1UL << tag); | |
| goto release; | |
| } | |
| /* | |
| * Task abort to the device W-LUN is illegal. When this command | |
| * will fail, due to spec violation, scsi err handling next step | |
| * will be to send LU reset which, again, is a spec violation. | |
| * To avoid these unnecessary/illegal steps, first we clean up | |
| * the lrb taken by this cmd and re-set it in outstanding_reqs, | |
| * then queue the eh_work and bail. | |
| */ | |
| if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN) { | |
| ufshcd_update_evt_hist(hba, UFS_EVT_ABORT, lrbp->lun); | |
| spin_lock_irqsave(host->host_lock, flags); | |
| hba->force_reset = true; | |
| ufshcd_schedule_eh_work(hba); | |
| spin_unlock_irqrestore(host->host_lock, flags); | |
| goto release; | |
| } | |
| if (hba->mcq_enabled) { | |
| /* MCQ mode. Branch off to handle abort for mcq mode */ | |
| err = ufshcd_mcq_abort(cmd); | |
| goto release; | |
| } | |
| /* Skip task abort in case previous aborts failed and report failure */ | |
| if (lrbp->req_abort_skip) { | |
| dev_err(hba->dev, "%s: skipping abort\n", __func__); | |
| ufshcd_set_req_abort_skip(hba, hba->outstanding_reqs); | |
| goto release; | |
| } | |
| if (blk_mq_is_reserved_rq(rq)) | |
| err = ufshcd_clear_cmd(hba, tag); | |
| else | |
| err = ufshcd_try_to_abort_task(hba, tag); | |
| if (err) { | |
| dev_err(hba->dev, "%s: failed with err %d\n", __func__, err); | |
| ufshcd_set_req_abort_skip(hba, hba->outstanding_reqs); | |
| err = FAILED; | |
| goto release; | |
| } | |
| /* | |
| * Clear the corresponding bit from outstanding_reqs since the command | |
| * has been aborted successfully. | |
| */ | |
| spin_lock_irqsave(&hba->outstanding_lock, flags); | |
| outstanding = __test_and_clear_bit(tag, &hba->outstanding_reqs); | |
| spin_unlock_irqrestore(&hba->outstanding_lock, flags); | |
| if (outstanding) | |
| ufshcd_release_scsi_cmd(hba, cmd); | |
| err = SUCCESS; | |
| release: | |
| /* Matches the ufshcd_hold() call at the start of this function. */ | |
| ufshcd_release(hba); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_process_probe_result - Process the ufshcd_probe_hba() result. | |
| * @hba: UFS host controller instance. | |
| * @probe_start: time when the ufshcd_probe_hba() call started. | |
| * @ret: ufshcd_probe_hba() return value. | |
| */ | |
| static void ufshcd_process_probe_result(struct ufs_hba *hba, | |
| ktime_t probe_start, int ret) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (ret) | |
| hba->ufshcd_state = UFSHCD_STATE_ERROR; | |
| else if (hba->ufshcd_state == UFSHCD_STATE_RESET) | |
| hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| trace_ufshcd_init(hba, ret, | |
| ktime_to_us(ktime_sub(ktime_get(), probe_start)), | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| } | |
| /** | |
| * ufshcd_host_reset_and_restore - reset and restore host controller | |
| * @hba: per-adapter instance | |
| * | |
| * Note that host controller reset may issue DME_RESET to | |
| * local and remote (device) Uni-Pro stack and the attributes | |
| * are reset to default state. | |
| * | |
| * Return: zero on success, non-zero on failure. | |
| */ | |
| static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) | |
| { | |
| int err; | |
| /* | |
| * Stop the host controller and complete the requests | |
| * cleared by h/w | |
| */ | |
| ufshcd_hba_stop(hba); | |
| hba->silence_err_logs = true; | |
| ufshcd_complete_requests(hba, true); | |
| hba->silence_err_logs = false; | |
| /* scale up clocks to max frequency before full reinitialization */ | |
| if (ufshcd_is_clkscaling_supported(hba)) | |
| ufshcd_scale_clks(hba, ULONG_MAX, true); | |
| err = ufshcd_hba_enable(hba); | |
| /* Establish the link again and restore the device */ | |
| if (!err) { | |
| ktime_t probe_start = ktime_get(); | |
| err = ufshcd_device_init(hba, /*init_dev_params=*/false); | |
| if (!err) | |
| err = ufshcd_probe_hba(hba, false); | |
| ufshcd_process_probe_result(hba, probe_start, err); | |
| } | |
| if (err) | |
| dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err); | |
| ufshcd_update_evt_hist(hba, UFS_EVT_HOST_RESET, (u32)err); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_reset_and_restore - reset and re-initialize host/device | |
| * @hba: per-adapter instance | |
| * | |
| * Reset and recover device, host and re-establish link. This | |
| * is helpful to recover the communication in fatal error conditions. | |
| * | |
| * Return: zero on success, non-zero on failure. | |
| */ | |
| static int ufshcd_reset_and_restore(struct ufs_hba *hba) | |
| { | |
| u32 saved_err = 0; | |
| u32 saved_uic_err = 0; | |
| int err = 0; | |
| unsigned long flags; | |
| int retries = MAX_HOST_RESET_RETRIES; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| do { | |
| /* | |
| * This is a fresh start, cache and clear saved error first, | |
| * in case new error generated during reset and restore. | |
| */ | |
| saved_err |= hba->saved_err; | |
| saved_uic_err |= hba->saved_uic_err; | |
| hba->saved_err = 0; | |
| hba->saved_uic_err = 0; | |
| hba->force_reset = false; | |
| hba->ufshcd_state = UFSHCD_STATE_RESET; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| /* Reset the attached device */ | |
| ufshcd_device_reset(hba); | |
| err = ufshcd_host_reset_and_restore(hba); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (err) | |
| continue; | |
| /* Do not exit unless operational or dead */ | |
| if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL && | |
| hba->ufshcd_state != UFSHCD_STATE_ERROR && | |
| hba->ufshcd_state != UFSHCD_STATE_EH_SCHEDULED_NON_FATAL) | |
| err = -EAGAIN; | |
| } while (err && --retries); | |
| /* | |
| * Inform scsi mid-layer that we did reset and allow to handle | |
| * Unit Attention properly. | |
| */ | |
| scsi_report_bus_reset(hba->host, 0); | |
| if (err) { | |
| hba->ufshcd_state = UFSHCD_STATE_ERROR; | |
| hba->saved_err |= saved_err; | |
| hba->saved_uic_err |= saved_uic_err; | |
| } | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_eh_host_reset_handler - host reset handler registered to scsi layer | |
| * @cmd: SCSI command pointer | |
| * | |
| * Return: SUCCESS or FAILED. | |
| */ | |
| static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd) | |
| { | |
| int err = SUCCESS; | |
| unsigned long flags; | |
| struct ufs_hba *hba; | |
| hba = shost_priv(cmd->device->host); | |
| /* | |
| * If runtime PM sent SSU and got a timeout, scsi_error_handler is | |
| * stuck in this function waiting for flush_work(&hba->eh_work). And | |
| * ufshcd_err_handler(eh_work) is stuck waiting for runtime PM. Do | |
| * ufshcd_link_recovery instead of eh_work to prevent deadlock. | |
| */ | |
| if (hba->pm_op_in_progress) { | |
| if (ufshcd_link_recovery(hba)) | |
| err = FAILED; | |
| return err; | |
| } | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| hba->force_reset = true; | |
| ufshcd_schedule_eh_work(hba); | |
| dev_err(hba->dev, "%s: reset in progress - 1\n", __func__); | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| flush_work(&hba->eh_work); | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| if (hba->ufshcd_state == UFSHCD_STATE_ERROR) | |
| err = FAILED; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_get_max_icc_level - calculate the ICC level | |
| * @sup_curr_uA: max. current supported by the regulator | |
| * @start_scan: row at the desc table to start scan from | |
| * @buff: power descriptor buffer | |
| * | |
| * Return: calculated max ICC level for specific regulator. | |
| */ | |
| static u32 ufshcd_get_max_icc_level(int sup_curr_uA, u32 start_scan, | |
| const char *buff) | |
| { | |
| int i; | |
| int curr_uA; | |
| u16 data; | |
| u16 unit; | |
| for (i = start_scan; i >= 0; i--) { | |
| data = get_unaligned_be16(&buff[2 * i]); | |
| unit = (data & ATTR_ICC_LVL_UNIT_MASK) >> | |
| ATTR_ICC_LVL_UNIT_OFFSET; | |
| curr_uA = data & ATTR_ICC_LVL_VALUE_MASK; | |
| switch (unit) { | |
| case UFSHCD_NANO_AMP: | |
| curr_uA = curr_uA / 1000; | |
| break; | |
| case UFSHCD_MILI_AMP: | |
| curr_uA = curr_uA * 1000; | |
| break; | |
| case UFSHCD_AMP: | |
| curr_uA = curr_uA * 1000 * 1000; | |
| break; | |
| case UFSHCD_MICRO_AMP: | |
| default: | |
| break; | |
| } | |
| if (sup_curr_uA >= curr_uA) | |
| break; | |
| } | |
| if (i < 0) { | |
| i = 0; | |
| pr_err("%s: Couldn't find valid icc_level = %d", __func__, i); | |
| } | |
| return (u32)i; | |
| } | |
| /** | |
| * ufshcd_find_max_sup_active_icc_level - calculate the max ICC level | |
| * In case regulators are not initialized we'll return 0 | |
| * @hba: per-adapter instance | |
| * @desc_buf: power descriptor buffer to extract ICC levels from. | |
| * | |
| * Return: calculated ICC level. | |
| */ | |
| static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba, | |
| const u8 *desc_buf) | |
| { | |
| u32 icc_level = 0; | |
| if (!hba->vreg_info.vcc || !hba->vreg_info.vccq || | |
| !hba->vreg_info.vccq2) { | |
| /* | |
| * Using dev_dbg to avoid messages during runtime PM to avoid | |
| * never-ending cycles of messages written back to storage by | |
| * user space causing runtime resume, causing more messages and | |
| * so on. | |
| */ | |
| dev_dbg(hba->dev, | |
| "%s: Regulator capability was not set, actvIccLevel=%d", | |
| __func__, icc_level); | |
| goto out; | |
| } | |
| if (hba->vreg_info.vcc->max_uA) | |
| icc_level = ufshcd_get_max_icc_level( | |
| hba->vreg_info.vcc->max_uA, | |
| POWER_DESC_MAX_ACTV_ICC_LVLS - 1, | |
| &desc_buf[PWR_DESC_ACTIVE_LVLS_VCC_0]); | |
| if (hba->vreg_info.vccq->max_uA) | |
| icc_level = ufshcd_get_max_icc_level( | |
| hba->vreg_info.vccq->max_uA, | |
| icc_level, | |
| &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ_0]); | |
| if (hba->vreg_info.vccq2->max_uA) | |
| icc_level = ufshcd_get_max_icc_level( | |
| hba->vreg_info.vccq2->max_uA, | |
| icc_level, | |
| &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ2_0]); | |
| out: | |
| return icc_level; | |
| } | |
| static void ufshcd_set_active_icc_lvl(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| u8 *desc_buf; | |
| u32 icc_level; | |
| desc_buf = kzalloc(QUERY_DESC_MAX_SIZE, GFP_KERNEL); | |
| if (!desc_buf) | |
| return; | |
| ret = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_POWER, 0, 0, | |
| desc_buf, QUERY_DESC_MAX_SIZE); | |
| if (ret) { | |
| dev_err(hba->dev, | |
| "%s: Failed reading power descriptor ret = %d", | |
| __func__, ret); | |
| goto out; | |
| } | |
| icc_level = ufshcd_find_max_sup_active_icc_level(hba, desc_buf); | |
| dev_dbg(hba->dev, "%s: setting icc_level 0x%x", __func__, icc_level); | |
| ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, | |
| QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0, &icc_level); | |
| if (ret) | |
| dev_err(hba->dev, | |
| "%s: Failed configuring bActiveICCLevel = %d ret = %d", | |
| __func__, icc_level, ret); | |
| out: | |
| kfree(desc_buf); | |
| } | |
| static inline void ufshcd_blk_pm_runtime_init(struct scsi_device *sdev) | |
| { | |
| struct Scsi_Host *shost = sdev->host; | |
| scsi_autopm_get_device(sdev); | |
| blk_pm_runtime_init(sdev->request_queue, &sdev->sdev_gendev); | |
| if (sdev->rpm_autosuspend) | |
| pm_runtime_set_autosuspend_delay(&sdev->sdev_gendev, | |
| shost->rpm_autosuspend_delay); | |
| scsi_autopm_put_device(sdev); | |
| } | |
| /** | |
| * ufshcd_scsi_add_wlus - Adds required W-LUs | |
| * @hba: per-adapter instance | |
| * | |
| * UFS device specification requires the UFS devices to support 4 well known | |
| * logical units: | |
| * "REPORT_LUNS" (address: 01h) | |
| * "UFS Device" (address: 50h) | |
| * "RPMB" (address: 44h) | |
| * "BOOT" (address: 30h) | |
| * UFS device's power management needs to be controlled by "POWER CONDITION" | |
| * field of SSU (START STOP UNIT) command. But this "power condition" field | |
| * will take effect only when its sent to "UFS device" well known logical unit | |
| * hence we require the scsi_device instance to represent this logical unit in | |
| * order for the UFS host driver to send the SSU command for power management. | |
| * | |
| * We also require the scsi_device instance for "RPMB" (Replay Protected Memory | |
| * Block) LU so user space process can control this LU. User space may also | |
| * want to have access to BOOT LU. | |
| * | |
| * This function adds scsi device instances for each of all well known LUs | |
| * (except "REPORT LUNS" LU). | |
| * | |
| * Return: zero on success (all required W-LUs are added successfully), | |
| * non-zero error value on failure (if failed to add any of the required W-LU). | |
| */ | |
| static int ufshcd_scsi_add_wlus(struct ufs_hba *hba) | |
| { | |
| int ret = 0; | |
| struct scsi_device *sdev_boot, *sdev_rpmb; | |
| hba->ufs_device_wlun = __scsi_add_device(hba->host, 0, 0, | |
| ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN), NULL); | |
| if (IS_ERR(hba->ufs_device_wlun)) { | |
| ret = PTR_ERR(hba->ufs_device_wlun); | |
| hba->ufs_device_wlun = NULL; | |
| goto out; | |
| } | |
| scsi_device_put(hba->ufs_device_wlun); | |
| sdev_rpmb = __scsi_add_device(hba->host, 0, 0, | |
| ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL); | |
| if (IS_ERR(sdev_rpmb)) { | |
| ret = PTR_ERR(sdev_rpmb); | |
| hba->ufs_rpmb_wlun = NULL; | |
| dev_err(hba->dev, "%s: RPMB WLUN not found\n", __func__); | |
| goto remove_ufs_device_wlun; | |
| } | |
| hba->ufs_rpmb_wlun = sdev_rpmb; | |
| ufshcd_blk_pm_runtime_init(sdev_rpmb); | |
| scsi_device_put(sdev_rpmb); | |
| sdev_boot = __scsi_add_device(hba->host, 0, 0, | |
| ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL); | |
| if (IS_ERR(sdev_boot)) { | |
| dev_err(hba->dev, "%s: BOOT WLUN not found\n", __func__); | |
| } else { | |
| ufshcd_blk_pm_runtime_init(sdev_boot); | |
| scsi_device_put(sdev_boot); | |
| } | |
| goto out; | |
| remove_ufs_device_wlun: | |
| scsi_remove_device(hba->ufs_device_wlun); | |
| out: | |
| return ret; | |
| } | |
| static void ufshcd_wb_probe(struct ufs_hba *hba, const u8 *desc_buf) | |
| { | |
| struct ufs_dev_info *dev_info = &hba->dev_info; | |
| u8 lun; | |
| u32 d_lu_wb_buf_alloc; | |
| u32 ext_ufs_feature; | |
| if (!ufshcd_is_wb_allowed(hba)) | |
| return; | |
| /* | |
| * Probe WB only for UFS-2.2 and UFS-3.1 (and later) devices or | |
| * UFS devices with quirk UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES | |
| * enabled | |
| */ | |
| if (!(dev_info->wspecversion >= 0x310 || | |
| dev_info->wspecversion == 0x220 || | |
| (hba->dev_quirks & UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES))) | |
| goto wb_disabled; | |
| ext_ufs_feature = get_unaligned_be32(desc_buf + | |
| DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP); | |
| if (!(ext_ufs_feature & UFS_DEV_WRITE_BOOSTER_SUP)) | |
| goto wb_disabled; | |
| /* | |
| * WB may be supported but not configured while provisioning. The spec | |
| * says, in dedicated wb buffer mode, a max of 1 lun would have wb | |
| * buffer configured. | |
| */ | |
| dev_info->wb_buffer_type = desc_buf[DEVICE_DESC_PARAM_WB_TYPE]; | |
| dev_info->ext_wb_sup = get_unaligned_be16(desc_buf + | |
| DEVICE_DESC_PARAM_EXT_WB_SUP); | |
| dev_info->b_presrv_uspc_en = | |
| desc_buf[DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN]; | |
| if (dev_info->wb_buffer_type == WB_BUF_MODE_SHARED) { | |
| if (!get_unaligned_be32(desc_buf + | |
| DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS)) | |
| goto wb_disabled; | |
| } else { | |
| for (lun = 0; lun < UFS_UPIU_MAX_WB_LUN_ID; lun++) { | |
| d_lu_wb_buf_alloc = 0; | |
| ufshcd_read_unit_desc_param(hba, | |
| lun, | |
| UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS, | |
| (u8 *)&d_lu_wb_buf_alloc, | |
| sizeof(d_lu_wb_buf_alloc)); | |
| if (d_lu_wb_buf_alloc) { | |
| dev_info->wb_dedicated_lu = lun; | |
| break; | |
| } | |
| } | |
| if (!d_lu_wb_buf_alloc) | |
| goto wb_disabled; | |
| } | |
| if (!ufshcd_is_wb_buf_lifetime_available(hba)) | |
| goto wb_disabled; | |
| return; | |
| wb_disabled: | |
| hba->caps &= ~UFSHCD_CAP_WB_EN; | |
| } | |
| static void ufshcd_temp_notif_probe(struct ufs_hba *hba, const u8 *desc_buf) | |
| { | |
| struct ufs_dev_info *dev_info = &hba->dev_info; | |
| u32 ext_ufs_feature; | |
| u8 mask = 0; | |
| if (!(hba->caps & UFSHCD_CAP_TEMP_NOTIF) || dev_info->wspecversion < 0x300) | |
| return; | |
| ext_ufs_feature = get_unaligned_be32(desc_buf + DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP); | |
| if (ext_ufs_feature & UFS_DEV_LOW_TEMP_NOTIF) | |
| mask |= MASK_EE_TOO_LOW_TEMP; | |
| if (ext_ufs_feature & UFS_DEV_HIGH_TEMP_NOTIF) | |
| mask |= MASK_EE_TOO_HIGH_TEMP; | |
| if (mask) { | |
| ufshcd_enable_ee(hba, mask); | |
| ufs_hwmon_probe(hba, mask); | |
| } | |
| } | |
| static void ufshcd_device_lvl_exception_probe(struct ufs_hba *hba, u8 *desc_buf) | |
| { | |
| u32 ext_ufs_feature; | |
| if (hba->dev_info.wspecversion < 0x410) | |
| return; | |
| ext_ufs_feature = get_unaligned_be32(desc_buf + | |
| DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP); | |
| if (!(ext_ufs_feature & UFS_DEV_LVL_EXCEPTION_SUP)) | |
| return; | |
| atomic_set(&hba->dev_lvl_exception_count, 0); | |
| ufshcd_enable_ee(hba, MASK_EE_DEV_LVL_EXCEPTION); | |
| } | |
| static void ufshcd_set_rtt(struct ufs_hba *hba) | |
| { | |
| struct ufs_dev_info *dev_info = &hba->dev_info; | |
| u32 rtt = 0; | |
| u32 dev_rtt = 0; | |
| /* RTT override makes sense only for UFS-4.0 and above */ | |
| if (dev_info->wspecversion < 0x400) | |
| return; | |
| if (ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, | |
| QUERY_ATTR_IDN_MAX_NUM_OF_RTT, 0, 0, &dev_rtt)) { | |
| dev_err(hba->dev, "failed reading bMaxNumOfRTT\n"); | |
| return; | |
| } | |
| /* do not override if it was already written */ | |
| if (dev_rtt != DEFAULT_MAX_NUM_RTT) | |
| return; | |
| rtt = min_t(int, dev_info->rtt_cap, hba->nortt); | |
| if (rtt == dev_rtt) | |
| return; | |
| if (ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, | |
| QUERY_ATTR_IDN_MAX_NUM_OF_RTT, 0, 0, &rtt)) | |
| dev_err(hba->dev, "failed writing bMaxNumOfRTT\n"); | |
| } | |
| void ufshcd_fixup_dev_quirks(struct ufs_hba *hba, | |
| const struct ufs_dev_quirk *fixups) | |
| { | |
| const struct ufs_dev_quirk *f; | |
| struct ufs_dev_info *dev_info = &hba->dev_info; | |
| if (!fixups) | |
| return; | |
| for (f = fixups; f->quirk; f++) { | |
| if ((f->wmanufacturerid == dev_info->wmanufacturerid || | |
| f->wmanufacturerid == UFS_ANY_VENDOR) && | |
| ((dev_info->model && | |
| STR_PRFX_EQUAL(f->model, dev_info->model)) || | |
| !strcmp(f->model, UFS_ANY_MODEL))) | |
| hba->dev_quirks |= f->quirk; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_fixup_dev_quirks); | |
| static void ufs_fixup_device_setup(struct ufs_hba *hba) | |
| { | |
| /* fix by general quirk table */ | |
| ufshcd_fixup_dev_quirks(hba, ufs_fixups); | |
| /* allow vendors to fix quirks */ | |
| ufshcd_vops_fixup_dev_quirks(hba); | |
| } | |
| static void ufshcd_update_rtc(struct ufs_hba *hba) | |
| { | |
| struct timespec64 ts64; | |
| int err; | |
| u32 val; | |
| ktime_get_real_ts64(&ts64); | |
| if (ts64.tv_sec < hba->dev_info.rtc_time_baseline) { | |
| dev_warn_once(hba->dev, "%s: Current time precedes previous setting!\n", __func__); | |
| return; | |
| } | |
| /* | |
| * The Absolute RTC mode has a 136-year limit, spanning from 2010 to 2146. If a time beyond | |
| * 2146 is required, it is recommended to choose the relative RTC mode. | |
| */ | |
| val = ts64.tv_sec - hba->dev_info.rtc_time_baseline; | |
| /* Skip update RTC if RPM state is not RPM_ACTIVE */ | |
| if (ufshcd_rpm_get_if_active(hba) <= 0) | |
| return; | |
| err = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, QUERY_ATTR_IDN_SECONDS_PASSED, | |
| 0, 0, &val); | |
| ufshcd_rpm_put(hba); | |
| if (err) | |
| dev_err(hba->dev, "%s: Failed to update rtc %d\n", __func__, err); | |
| else if (hba->dev_info.rtc_type == UFS_RTC_RELATIVE) | |
| hba->dev_info.rtc_time_baseline = ts64.tv_sec; | |
| } | |
| static void ufshcd_rtc_work(struct work_struct *work) | |
| { | |
| struct ufs_hba *hba; | |
| hba = container_of(to_delayed_work(work), struct ufs_hba, ufs_rtc_update_work); | |
| /* Update RTC only when there are no requests in progress and UFSHCI is operational */ | |
| if (!ufshcd_is_ufs_dev_busy(hba) && | |
| hba->ufshcd_state == UFSHCD_STATE_OPERATIONAL && | |
| !hba->clk_gating.active_reqs) | |
| ufshcd_update_rtc(hba); | |
| if (ufshcd_is_ufs_dev_active(hba) && hba->dev_info.rtc_update_period) | |
| schedule_delayed_work(&hba->ufs_rtc_update_work, | |
| msecs_to_jiffies(hba->dev_info.rtc_update_period)); | |
| } | |
| static void ufs_init_rtc(struct ufs_hba *hba, u8 *desc_buf) | |
| { | |
| u16 periodic_rtc_update = get_unaligned_be16(&desc_buf[DEVICE_DESC_PARAM_FRQ_RTC]); | |
| struct ufs_dev_info *dev_info = &hba->dev_info; | |
| if (periodic_rtc_update & UFS_RTC_TIME_BASELINE) { | |
| dev_info->rtc_type = UFS_RTC_ABSOLUTE; | |
| /* | |
| * The concept of measuring time in Linux as the number of seconds elapsed since | |
| * 00:00:00 UTC on January 1, 1970, and UFS ABS RTC is elapsed from January 1st | |
| * 2010 00:00, here we need to adjust ABS baseline. | |
| */ | |
| dev_info->rtc_time_baseline = mktime64(2010, 1, 1, 0, 0, 0) - | |
| mktime64(1970, 1, 1, 0, 0, 0); | |
| } else { | |
| dev_info->rtc_type = UFS_RTC_RELATIVE; | |
| dev_info->rtc_time_baseline = 0; | |
| } | |
| /* | |
| * We ignore TIME_PERIOD defined in wPeriodicRTCUpdate because Spec does not clearly state | |
| * how to calculate the specific update period for each time unit. And we disable periodic | |
| * RTC update work, let user configure by sysfs node according to specific circumstance. | |
| */ | |
| dev_info->rtc_update_period = 0; | |
| } | |
| /** | |
| * ufshcd_create_device_id - Generate unique device identifier string | |
| * @hba: per-adapter instance | |
| * @desc_buf: device descriptor buffer | |
| * | |
| * Creates a unique device ID string combining manufacturer ID, spec version, | |
| * model name, serial number (as hex), device version, and manufacture date. | |
| * | |
| * Returns: Allocated device ID string on success, NULL on failure | |
| */ | |
| static char *ufshcd_create_device_id(struct ufs_hba *hba, u8 *desc_buf) | |
| { | |
| struct ufs_dev_info *dev_info = &hba->dev_info; | |
| u16 manufacture_date; | |
| u16 device_version; | |
| u8 *serial_number; | |
| char *serial_hex; | |
| char *device_id; | |
| u8 serial_index; | |
| int serial_len; | |
| int ret; | |
| serial_index = desc_buf[DEVICE_DESC_PARAM_SN]; | |
| ret = ufshcd_read_string_desc(hba, serial_index, &serial_number, SD_RAW); | |
| if (ret < 0) { | |
| dev_err(hba->dev, "Failed reading Serial Number. err = %d\n", ret); | |
| return NULL; | |
| } | |
| device_version = get_unaligned_be16(&desc_buf[DEVICE_DESC_PARAM_DEV_VER]); | |
| manufacture_date = get_unaligned_be16(&desc_buf[DEVICE_DESC_PARAM_MANF_DATE]); | |
| serial_len = ret; | |
| /* Allocate buffer for hex string: 2 chars per byte + null terminator */ | |
| serial_hex = kzalloc(serial_len * 2 + 1, GFP_KERNEL); | |
| if (!serial_hex) { | |
| kfree(serial_number); | |
| return NULL; | |
| } | |
| bin2hex(serial_hex, serial_number, serial_len); | |
| /* | |
| * Device ID format is ABI with secure world - do not change without firmware | |
| * coordination. | |
| */ | |
| device_id = kasprintf(GFP_KERNEL, "%04X-%04X-%s-%s-%04X-%04X", | |
| dev_info->wmanufacturerid, dev_info->wspecversion, | |
| dev_info->model, serial_hex, device_version, | |
| manufacture_date); | |
| kfree(serial_hex); | |
| kfree(serial_number); | |
| if (!device_id) | |
| dev_warn(hba->dev, "Failed to allocate unique device ID\n"); | |
| return device_id; | |
| } | |
| static int ufs_get_device_desc(struct ufs_hba *hba) | |
| { | |
| struct ufs_dev_info *dev_info = &hba->dev_info; | |
| struct Scsi_Host *shost = hba->host; | |
| int err; | |
| u8 model_index; | |
| u8 *desc_buf; | |
| desc_buf = kzalloc(QUERY_DESC_MAX_SIZE, GFP_KERNEL); | |
| if (!desc_buf) { | |
| err = -ENOMEM; | |
| goto out; | |
| } | |
| err = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_DEVICE, 0, 0, desc_buf, | |
| QUERY_DESC_MAX_SIZE); | |
| if (err) { | |
| dev_err(hba->dev, "%s: Failed reading Device Desc. err = %d\n", | |
| __func__, err); | |
| goto out; | |
| } | |
| /* | |
| * getting vendor (manufacturerID) and Bank Index in big endian | |
| * format | |
| */ | |
| dev_info->wmanufacturerid = desc_buf[DEVICE_DESC_PARAM_MANF_ID] << 8 | | |
| desc_buf[DEVICE_DESC_PARAM_MANF_ID + 1]; | |
| /* getting Specification Version in big endian format */ | |
| dev_info->wspecversion = desc_buf[DEVICE_DESC_PARAM_SPEC_VER] << 8 | | |
| desc_buf[DEVICE_DESC_PARAM_SPEC_VER + 1]; | |
| dev_info->bqueuedepth = desc_buf[DEVICE_DESC_PARAM_Q_DPTH]; | |
| /* | |
| * According to the UFS standard, the UFS device queue depth | |
| * (bQueueDepth) must be in the range 1..255 if the shared queueing | |
| * architecture is supported. bQueueDepth is zero if the shared queueing | |
| * architecture is not supported. | |
| */ | |
| if (dev_info->bqueuedepth) | |
| shost->cmd_per_lun = min(hba->nutrs, dev_info->bqueuedepth) - | |
| UFSHCD_NUM_RESERVED; | |
| else | |
| shost->cmd_per_lun = shost->can_queue; | |
| dev_info->rtt_cap = desc_buf[DEVICE_DESC_PARAM_RTT_CAP]; | |
| dev_info->hid_sup = get_unaligned_be32(desc_buf + | |
| DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP) & | |
| UFS_DEV_HID_SUPPORT; | |
| model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME]; | |
| err = ufshcd_read_string_desc(hba, model_index, | |
| &dev_info->model, SD_ASCII_STD); | |
| if (err < 0) { | |
| dev_err(hba->dev, "%s: Failed reading Product Name. err = %d\n", | |
| __func__, err); | |
| goto out; | |
| } | |
| /* Generate unique device ID */ | |
| dev_info->device_id = ufshcd_create_device_id(hba, desc_buf); | |
| hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] + | |
| desc_buf[DEVICE_DESC_PARAM_NUM_WLU]; | |
| ufs_fixup_device_setup(hba); | |
| ufshcd_wb_probe(hba, desc_buf); | |
| ufshcd_temp_notif_probe(hba, desc_buf); | |
| if (dev_info->wspecversion >= 0x410) { | |
| hba->critical_health_count = 0; | |
| ufshcd_enable_ee(hba, MASK_EE_HEALTH_CRITICAL); | |
| } | |
| ufs_init_rtc(hba, desc_buf); | |
| ufshcd_device_lvl_exception_probe(hba, desc_buf); | |
| /* | |
| * ufshcd_read_string_desc returns size of the string | |
| * reset the error value | |
| */ | |
| err = 0; | |
| out: | |
| kfree(desc_buf); | |
| return err; | |
| } | |
| static void ufs_put_device_desc(struct ufs_hba *hba) | |
| { | |
| struct ufs_dev_info *dev_info = &hba->dev_info; | |
| kfree(dev_info->model); | |
| dev_info->model = NULL; | |
| kfree(dev_info->device_id); | |
| dev_info->device_id = NULL; | |
| } | |
| /** | |
| * ufshcd_quirk_tune_host_pa_tactivate - Ensures that host PA_TACTIVATE is | |
| * less than device PA_TACTIVATE time. | |
| * @hba: per-adapter instance | |
| * | |
| * Some UFS devices require host PA_TACTIVATE to be lower than device | |
| * PA_TACTIVATE, we need to enable UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE quirk | |
| * for such devices. | |
| * | |
| * Return: zero on success, non-zero error value on failure. | |
| */ | |
| static int ufshcd_quirk_tune_host_pa_tactivate(struct ufs_hba *hba) | |
| { | |
| int ret = 0; | |
| u32 granularity, peer_granularity; | |
| u32 pa_tactivate, peer_pa_tactivate; | |
| u32 pa_tactivate_us, peer_pa_tactivate_us; | |
| static const u8 gran_to_us_table[] = {1, 4, 8, 16, 32, 100}; | |
| ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_GRANULARITY), | |
| &granularity); | |
| if (ret) | |
| goto out; | |
| ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY), | |
| &peer_granularity); | |
| if (ret) | |
| goto out; | |
| if ((granularity < PA_GRANULARITY_MIN_VAL) || | |
| (granularity > PA_GRANULARITY_MAX_VAL)) { | |
| dev_err(hba->dev, "%s: invalid host PA_GRANULARITY %d", | |
| __func__, granularity); | |
| return -EINVAL; | |
| } | |
| if ((peer_granularity < PA_GRANULARITY_MIN_VAL) || | |
| (peer_granularity > PA_GRANULARITY_MAX_VAL)) { | |
| dev_err(hba->dev, "%s: invalid device PA_GRANULARITY %d", | |
| __func__, peer_granularity); | |
| return -EINVAL; | |
| } | |
| ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &pa_tactivate); | |
| if (ret) | |
| goto out; | |
| ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_TACTIVATE), | |
| &peer_pa_tactivate); | |
| if (ret) | |
| goto out; | |
| pa_tactivate_us = pa_tactivate * gran_to_us_table[granularity - 1]; | |
| peer_pa_tactivate_us = peer_pa_tactivate * | |
| gran_to_us_table[peer_granularity - 1]; | |
| if (pa_tactivate_us >= peer_pa_tactivate_us) { | |
| u32 new_peer_pa_tactivate; | |
| new_peer_pa_tactivate = pa_tactivate_us / | |
| gran_to_us_table[peer_granularity - 1]; | |
| new_peer_pa_tactivate++; | |
| ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(PA_TACTIVATE), | |
| new_peer_pa_tactivate); | |
| } | |
| out: | |
| return ret; | |
| } | |
| /** | |
| * ufshcd_quirk_override_pa_h8time - Ensures proper adjustment of PA_HIBERN8TIME. | |
| * @hba: per-adapter instance | |
| * | |
| * Some UFS devices require specific adjustments to the PA_HIBERN8TIME parameter | |
| * to ensure proper hibernation timing. This function retrieves the current | |
| * PA_HIBERN8TIME value and increments it by 100us. | |
| */ | |
| static void ufshcd_quirk_override_pa_h8time(struct ufs_hba *hba) | |
| { | |
| u32 pa_h8time; | |
| int ret; | |
| ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_HIBERN8TIME), &pa_h8time); | |
| if (ret) { | |
| dev_err(hba->dev, "Failed to get PA_HIBERN8TIME: %d\n", ret); | |
| return; | |
| } | |
| /* Increment by 1 to increase hibernation time by 100 µs */ | |
| ret = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HIBERN8TIME), pa_h8time + 1); | |
| if (ret) | |
| dev_err(hba->dev, "Failed updating PA_HIBERN8TIME: %d\n", ret); | |
| } | |
| static void ufshcd_tune_unipro_params(struct ufs_hba *hba) | |
| { | |
| ufshcd_vops_apply_dev_quirks(hba); | |
| if (hba->dev_quirks & UFS_DEVICE_QUIRK_PA_TACTIVATE) | |
| /* set 1ms timeout for PA_TACTIVATE */ | |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), 10); | |
| if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE) | |
| ufshcd_quirk_tune_host_pa_tactivate(hba); | |
| if (hba->dev_quirks & UFS_DEVICE_QUIRK_PA_HIBER8TIME) | |
| ufshcd_quirk_override_pa_h8time(hba); | |
| ufshcd_apply_valid_tx_eq_settings(hba); | |
| } | |
| static void ufshcd_clear_dbg_ufs_stats(struct ufs_hba *hba) | |
| { | |
| hba->ufs_stats.hibern8_exit_cnt = 0; | |
| hba->ufs_stats.last_hibern8_exit_tstamp = ktime_set(0, 0); | |
| hba->req_abort_count = 0; | |
| } | |
| static int ufshcd_device_geo_params_init(struct ufs_hba *hba) | |
| { | |
| int err; | |
| u8 *desc_buf; | |
| desc_buf = kzalloc(QUERY_DESC_MAX_SIZE, GFP_KERNEL); | |
| if (!desc_buf) { | |
| err = -ENOMEM; | |
| goto out; | |
| } | |
| err = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_GEOMETRY, 0, 0, | |
| desc_buf, QUERY_DESC_MAX_SIZE); | |
| if (err) { | |
| dev_err(hba->dev, "%s: Failed reading Geometry Desc. err = %d\n", | |
| __func__, err); | |
| goto out; | |
| } | |
| if (desc_buf[GEOMETRY_DESC_PARAM_MAX_NUM_LUN] == 1) | |
| hba->dev_info.max_lu_supported = 32; | |
| else if (desc_buf[GEOMETRY_DESC_PARAM_MAX_NUM_LUN] == 0) | |
| hba->dev_info.max_lu_supported = 8; | |
| hba->dev_info.rpmb_io_size = desc_buf[GEOMETRY_DESC_PARAM_RPMB_RW_SIZE]; | |
| out: | |
| kfree(desc_buf); | |
| return err; | |
| } | |
| struct ufs_ref_clk { | |
| unsigned long freq_hz; | |
| enum ufs_ref_clk_freq val; | |
| }; | |
| static const struct ufs_ref_clk ufs_ref_clk_freqs[] = { | |
| {19200000, REF_CLK_FREQ_19_2_MHZ}, | |
| {26000000, REF_CLK_FREQ_26_MHZ}, | |
| {38400000, REF_CLK_FREQ_38_4_MHZ}, | |
| {52000000, REF_CLK_FREQ_52_MHZ}, | |
| {0, REF_CLK_FREQ_INVAL}, | |
| }; | |
| static enum ufs_ref_clk_freq | |
| ufs_get_bref_clk_from_hz(unsigned long freq) | |
| { | |
| int i; | |
| for (i = 0; ufs_ref_clk_freqs[i].freq_hz; i++) | |
| if (ufs_ref_clk_freqs[i].freq_hz == freq) | |
| return ufs_ref_clk_freqs[i].val; | |
| return REF_CLK_FREQ_INVAL; | |
| } | |
| void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk) | |
| { | |
| unsigned long freq; | |
| freq = clk_get_rate(refclk); | |
| hba->dev_ref_clk_freq = | |
| ufs_get_bref_clk_from_hz(freq); | |
| if (hba->dev_ref_clk_freq == REF_CLK_FREQ_INVAL) | |
| dev_err(hba->dev, | |
| "invalid ref_clk setting = %ld\n", freq); | |
| } | |
| static int ufshcd_set_dev_ref_clk(struct ufs_hba *hba) | |
| { | |
| int err; | |
| u32 ref_clk; | |
| u32 freq = hba->dev_ref_clk_freq; | |
| err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, | |
| QUERY_ATTR_IDN_REF_CLK_FREQ, 0, 0, &ref_clk); | |
| if (err) { | |
| dev_err(hba->dev, "failed reading bRefClkFreq. err = %d\n", | |
| err); | |
| goto out; | |
| } | |
| if (ref_clk == freq) | |
| goto out; /* nothing to update */ | |
| err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, | |
| QUERY_ATTR_IDN_REF_CLK_FREQ, 0, 0, &freq); | |
| if (err) { | |
| dev_err(hba->dev, "bRefClkFreq setting to %lu Hz failed\n", | |
| ufs_ref_clk_freqs[freq].freq_hz); | |
| goto out; | |
| } | |
| dev_dbg(hba->dev, "bRefClkFreq setting to %lu Hz succeeded\n", | |
| ufs_ref_clk_freqs[freq].freq_hz); | |
| out: | |
| return err; | |
| } | |
| static int ufshcd_device_params_init(struct ufs_hba *hba) | |
| { | |
| bool flag; | |
| int ret; | |
| /* Init UFS geometry descriptor related parameters */ | |
| ret = ufshcd_device_geo_params_init(hba); | |
| if (ret) | |
| goto out; | |
| /* Check and apply UFS device quirks */ | |
| ret = ufs_get_device_desc(hba); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: Failed getting device info. err = %d\n", | |
| __func__, ret); | |
| goto out; | |
| } | |
| ufshcd_set_rtt(hba); | |
| ufshcd_get_ref_clk_gating_wait(hba); | |
| if (!ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG, | |
| QUERY_FLAG_IDN_PWR_ON_WPE, 0, &flag)) | |
| hba->dev_info.f_power_on_wp_en = flag; | |
| /* Probe maximum power mode co-supported by both UFS host and device */ | |
| if (ufshcd_get_max_pwr_mode(hba)) | |
| dev_err(hba->dev, | |
| "%s: Failed getting max supported power mode\n", | |
| __func__); | |
| ufshcd_retrieve_tx_eq_settings(hba); | |
| out: | |
| return ret; | |
| } | |
| static void ufshcd_set_timestamp_attr(struct ufs_hba *hba) | |
| { | |
| struct ufs_dev_info *dev_info = &hba->dev_info; | |
| u64 ts_ns; | |
| int err; | |
| if (dev_info->wspecversion < 0x400 || | |
| hba->dev_quirks & UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT) | |
| return; | |
| ts_ns = ktime_get_real_ns(); | |
| err = ufshcd_query_attr_qword(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, | |
| QUERY_ATTR_IDN_TIMESTAMP, 0, 0, &ts_ns); | |
| if (err) | |
| dev_err(hba->dev, "%s: failed to set timestamp %d\n", | |
| __func__, err); | |
| } | |
| /** | |
| * ufshcd_add_lus - probe and add UFS logical units | |
| * @hba: per-adapter instance | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| static int ufshcd_add_lus(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| /* Add required well known logical units to scsi mid layer */ | |
| ret = ufshcd_scsi_add_wlus(hba); | |
| if (ret) | |
| goto out; | |
| /* Initialize devfreq after UFS device is detected */ | |
| if (ufshcd_is_clkscaling_supported(hba)) { | |
| memcpy(&hba->clk_scaling.saved_pwr_info, | |
| &hba->pwr_info, | |
| sizeof(struct ufs_pa_layer_attr)); | |
| hba->clk_scaling.is_allowed = true; | |
| ret = ufshcd_devfreq_init(hba); | |
| if (ret) | |
| goto out; | |
| hba->clk_scaling.is_enabled = true; | |
| ufshcd_init_clk_scaling_sysfs(hba); | |
| } | |
| /* | |
| * The RTC update code accesses the hba->ufs_device_wlun->sdev_gendev | |
| * pointer and hence must only be started after the WLUN pointer has | |
| * been initialized by ufshcd_scsi_add_wlus(). | |
| */ | |
| schedule_delayed_work(&hba->ufs_rtc_update_work, | |
| msecs_to_jiffies(UFS_RTC_UPDATE_INTERVAL_MS)); | |
| ufs_bsg_probe(hba); | |
| scsi_scan_host(hba->host); | |
| ufs_rpmb_probe(hba); | |
| out: | |
| return ret; | |
| } | |
| /* SDB - Single Doorbell */ | |
| static void ufshcd_release_sdb_queue(struct ufs_hba *hba, int nutrs) | |
| { | |
| size_t ucdl_size, utrdl_size; | |
| ucdl_size = ufshcd_get_ucd_size(hba) * (nutrs - UFSHCD_NUM_RESERVED); | |
| dmam_free_coherent(hba->dev, ucdl_size, hba->ucdl_base_addr, | |
| hba->ucdl_dma_addr); | |
| utrdl_size = sizeof(struct utp_transfer_req_desc) * nutrs; | |
| dmam_free_coherent(hba->dev, utrdl_size, hba->utrdl_base_addr, | |
| hba->utrdl_dma_addr); | |
| } | |
| static int ufshcd_alloc_mcq(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| int old_nutrs = hba->nutrs; | |
| ret = ufshcd_get_hba_mac(hba); | |
| if (ret < 0) | |
| return ret; | |
| hba->nutrs = ret; | |
| ret = ufshcd_mcq_init(hba); | |
| if (ret) | |
| goto err; | |
| /* | |
| * Previously allocated memory for nutrs may not be enough in MCQ mode. | |
| * Number of supported tags in MCQ mode may be larger than SDB mode. | |
| */ | |
| if (hba->nutrs != old_nutrs) { | |
| ufshcd_release_sdb_queue(hba, old_nutrs); | |
| ret = ufshcd_memory_alloc(hba); | |
| if (ret) | |
| goto err; | |
| ufshcd_host_memory_configure(hba); | |
| } | |
| ret = ufshcd_mcq_memory_alloc(hba); | |
| if (ret) | |
| goto err; | |
| hba->host->can_queue = hba->nutrs - UFSHCD_NUM_RESERVED; | |
| return 0; | |
| err: | |
| hba->nutrs = old_nutrs; | |
| return ret; | |
| } | |
| static void ufshcd_config_mcq(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| ret = ufshcd_mcq_vops_config_esi(hba); | |
| hba->mcq_esi_enabled = !ret; | |
| dev_info(hba->dev, "ESI %sconfigured\n", ret ? "is not " : ""); | |
| ufshcd_mcq_make_queues_operational(hba); | |
| ufshcd_mcq_config_mac(hba, hba->nutrs); | |
| dev_info(hba->dev, "MCQ configured, nr_queues=%d, io_queues=%d, read_queue=%d, poll_queues=%d, queue_depth=%d\n", | |
| hba->nr_hw_queues, hba->nr_queues[HCTX_TYPE_DEFAULT], | |
| hba->nr_queues[HCTX_TYPE_READ], hba->nr_queues[HCTX_TYPE_POLL], | |
| hba->nutrs); | |
| } | |
| /** | |
| * ufshcd_get_op_mode - get UFS operating mode. | |
| * @hba: per-adapter instance | |
| * | |
| * Use the PA_PWRMODE value to represent the operating mode of UFS. | |
| * | |
| */ | |
| static enum ufs_op_mode ufshcd_get_op_mode(struct ufs_hba *hba) | |
| { | |
| u32 mode; | |
| u8 rx_mode; | |
| u8 tx_mode; | |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_PWRMODE), &mode); | |
| rx_mode = (mode >> PWRMODE_RX_OFFSET) & PWRMODE_MASK; | |
| tx_mode = mode & PWRMODE_MASK; | |
| if ((rx_mode == SLOW_MODE || rx_mode == SLOWAUTO_MODE) && | |
| (tx_mode == SLOW_MODE || tx_mode == SLOWAUTO_MODE)) | |
| return LS_MODE; | |
| return HS_MODE; | |
| } | |
| static int ufshcd_post_device_init(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| ufshcd_tune_unipro_params(hba); | |
| /* UFS device is also active now */ | |
| ufshcd_set_ufs_dev_active(hba); | |
| /* Indicate that DME QoS Monitor has been reset */ | |
| atomic_set(&hba->dme_qos_notification, 0x1); | |
| if (hba->dme_qos_sysfs_handle) | |
| sysfs_notify_dirent(hba->dme_qos_sysfs_handle); | |
| ufshcd_force_reset_auto_bkops(hba); | |
| ufshcd_set_timestamp_attr(hba); | |
| if (!hba->max_pwr_info.is_valid) | |
| return 0; | |
| /* | |
| * Set the right value to bRefClkFreq in LS_MODE before attempting to | |
| * switch to HS gears. | |
| */ | |
| if (ufshcd_get_op_mode(hba) == LS_MODE && | |
| hba->dev_ref_clk_freq != REF_CLK_FREQ_INVAL) | |
| ufshcd_set_dev_ref_clk(hba); | |
| /* Gear up to HS gear. */ | |
| ret = ufshcd_config_pwr_mode(hba, &hba->max_pwr_info.info, | |
| UFSHCD_PMC_POLICY_DONT_FORCE); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n", | |
| __func__, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int ufshcd_device_init(struct ufs_hba *hba, bool init_dev_params) | |
| { | |
| int ret; | |
| WARN_ON_ONCE(!hba->scsi_host_added); | |
| hba->ufshcd_state = UFSHCD_STATE_RESET; | |
| ret = ufshcd_link_startup(hba); | |
| if (ret) | |
| return ret; | |
| if (hba->quirks & UFSHCD_QUIRK_SKIP_PH_CONFIGURATION) | |
| return ret; | |
| /* Debug counters initialization */ | |
| ufshcd_clear_dbg_ufs_stats(hba); | |
| /* UniPro link is active now */ | |
| ufshcd_set_link_active(hba); | |
| /* Reconfigure MCQ upon reset */ | |
| if (hba->mcq_enabled && !init_dev_params) { | |
| ufshcd_config_mcq(hba); | |
| ufshcd_mcq_enable(hba); | |
| } | |
| /* Verify device initialization by sending NOP OUT UPIU */ | |
| ret = ufshcd_verify_dev_init(hba); | |
| if (ret) | |
| return ret; | |
| /* Initiate UFS initialization, and waiting until completion */ | |
| ret = ufshcd_complete_dev_init(hba); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Initialize UFS device parameters used by driver, these | |
| * parameters are associated with UFS descriptors. | |
| */ | |
| if (init_dev_params) { | |
| ret = ufshcd_device_params_init(hba); | |
| if (ret) | |
| return ret; | |
| if (is_mcq_supported(hba) && | |
| hba->quirks & UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH) { | |
| ufshcd_config_mcq(hba); | |
| ufshcd_mcq_enable(hba); | |
| } | |
| } | |
| return ufshcd_post_device_init(hba); | |
| } | |
| /** | |
| * ufshcd_probe_hba - probe hba to detect device and initialize it | |
| * @hba: per-adapter instance | |
| * @init_dev_params: whether or not to call ufshcd_device_params_init(). | |
| * | |
| * Execute link-startup and verify device initialization | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) | |
| { | |
| int ret; | |
| if (!hba->pm_op_in_progress && | |
| (hba->quirks & UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH)) { | |
| /* Reset the device and controller before doing reinit */ | |
| ufshcd_device_reset(hba); | |
| ufs_put_device_desc(hba); | |
| ufshcd_hba_stop(hba); | |
| ret = ufshcd_hba_enable(hba); | |
| if (ret) { | |
| dev_err(hba->dev, "Host controller enable failed\n"); | |
| ufshcd_print_evt_hist(hba); | |
| ufshcd_print_host_state(hba); | |
| return ret; | |
| } | |
| /* Reinit the device */ | |
| ret = ufshcd_device_init(hba, init_dev_params); | |
| if (ret) | |
| return ret; | |
| } | |
| ufshcd_print_pwr_info(hba); | |
| /* | |
| * bActiveICCLevel is volatile for UFS device (as per latest v2.1 spec) | |
| * and for removable UFS card as well, hence always set the parameter. | |
| * Note: Error handler may issue the device reset hence resetting | |
| * bActiveICCLevel as well so it is always safe to set this here. | |
| */ | |
| ufshcd_set_active_icc_lvl(hba); | |
| /* Enable UFS Write Booster if supported */ | |
| ufshcd_configure_wb(hba); | |
| if (hba->ee_usr_mask) | |
| ufshcd_write_ee_control(hba); | |
| ufshcd_configure_auto_hibern8(hba); | |
| return 0; | |
| } | |
| /** | |
| * ufshcd_async_scan - asynchronous execution for probing hba | |
| * @data: data pointer to pass to this function | |
| * @cookie: cookie data | |
| */ | |
| static void ufshcd_async_scan(void *data, async_cookie_t cookie) | |
| { | |
| struct ufs_hba *hba = (struct ufs_hba *)data; | |
| ktime_t probe_start; | |
| int ret; | |
| down(&hba->host_sem); | |
| /* Initialize hba, detect and initialize UFS device */ | |
| probe_start = ktime_get(); | |
| ret = ufshcd_probe_hba(hba, true); | |
| ufshcd_process_probe_result(hba, probe_start, ret); | |
| up(&hba->host_sem); | |
| if (ret) | |
| goto out; | |
| /* Probe and add UFS logical units */ | |
| ret = ufshcd_add_lus(hba); | |
| out: | |
| pm_runtime_put_sync(hba->dev); | |
| if (ret) | |
| dev_err(hba->dev, "%s failed: %d\n", __func__, ret); | |
| } | |
| static enum scsi_timeout_action ufshcd_eh_timed_out(struct scsi_cmnd *scmd) | |
| { | |
| struct ufs_hba *hba = shost_priv(scmd->device->host); | |
| if (!hba->pm_op_in_progress) { | |
| /* Activate the error handler in the SCSI core. */ | |
| return SCSI_EH_NOT_HANDLED; | |
| } | |
| /* | |
| * Handle the timeout directly to prevent a deadlock between | |
| * ufshcd_set_dev_pwr_mode() and ufshcd_err_handler(). | |
| */ | |
| ufshcd_link_recovery(hba); | |
| dev_info(hba->dev, "%s() finished; outstanding_tasks = %#lx.\n", | |
| __func__, hba->outstanding_tasks); | |
| /* | |
| * ufshcd_link_recovery() may already have completed @scmd, e.g. via | |
| * the existing MCQ force-completion path. | |
| */ | |
| if (!test_bit(SCMD_STATE_COMPLETE, &scmd->state)) { | |
| if (!hba->mcq_enabled) { | |
| unsigned long flags; | |
| struct request *rq = scsi_cmd_to_rq(scmd); | |
| spin_lock_irqsave(&hba->outstanding_lock, flags); | |
| __clear_bit(rq->tag, &hba->outstanding_reqs); | |
| spin_unlock_irqrestore(&hba->outstanding_lock, flags); | |
| } | |
| if (ufshcd_is_scsi_cmd(scmd)) { | |
| set_host_byte(scmd, DID_REQUEUE); | |
| ufshcd_release_scsi_cmd(hba, scmd); | |
| } else { | |
| set_host_byte(scmd, DID_TIME_OUT); | |
| } | |
| scsi_done(scmd); | |
| } | |
| return SCSI_EH_DONE; | |
| } | |
| static const struct attribute_group *ufshcd_driver_groups[] = { | |
| &ufs_sysfs_unit_descriptor_group, | |
| &ufs_sysfs_lun_attributes_group, | |
| NULL, | |
| }; | |
| static struct ufs_hba_variant_params ufs_hba_vps = { | |
| .hba_enable_delay_us = 1000, | |
| .wb_flush_threshold = UFS_WB_BUF_REMAIN_PERCENT(40), | |
| .devfreq_profile.polling_ms = 100, | |
| .devfreq_profile.target = ufshcd_devfreq_target, | |
| .devfreq_profile.get_dev_status = ufshcd_devfreq_get_dev_status, | |
| .ondemand_data.upthreshold = 70, | |
| .ondemand_data.downdifferential = 5, | |
| }; | |
| static const struct scsi_host_template ufshcd_driver_template = { | |
| .module = THIS_MODULE, | |
| .name = UFSHCD, | |
| .proc_name = UFSHCD, | |
| .map_queues = ufshcd_map_queues, | |
| .cmd_size = sizeof(struct ufshcd_lrb), | |
| .init_cmd_priv = ufshcd_init_cmd_priv, | |
| .queuecommand = ufshcd_queuecommand, | |
| .queue_reserved_command = ufshcd_queue_reserved_command, | |
| .nr_reserved_cmds = UFSHCD_NUM_RESERVED, | |
| .mq_poll = ufshcd_poll, | |
| .sdev_init = ufshcd_sdev_init, | |
| .sdev_configure = ufshcd_sdev_configure, | |
| .sdev_destroy = ufshcd_sdev_destroy, | |
| .change_queue_depth = ufshcd_change_queue_depth, | |
| .eh_abort_handler = ufshcd_abort, | |
| .eh_device_reset_handler = ufshcd_eh_device_reset_handler, | |
| .eh_host_reset_handler = ufshcd_eh_host_reset_handler, | |
| .eh_timed_out = ufshcd_eh_timed_out, | |
| .this_id = -1, | |
| .sg_tablesize = SG_ALL, | |
| .max_segment_size = PRDT_DATA_BYTE_COUNT_MAX, | |
| .max_sectors = SZ_1M / SECTOR_SIZE, | |
| .max_host_blocked = 1, | |
| .host_tagset = true, | |
| .track_queue_depth = 1, | |
| .skip_settle_delay = 1, | |
| .sdev_groups = ufshcd_driver_groups, | |
| }; | |
| static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, | |
| int ua) | |
| { | |
| int ret; | |
| if (!vreg) | |
| return 0; | |
| /* | |
| * "set_load" operation shall be required on those regulators | |
| * which specifically configured current limitation. Otherwise | |
| * zero max_uA may cause unexpected behavior when regulator is | |
| * enabled or set as high power mode. | |
| */ | |
| if (!vreg->max_uA) | |
| return 0; | |
| ret = regulator_set_load(vreg->reg, ua); | |
| if (ret < 0) { | |
| dev_err(dev, "%s: %s set load (ua=%d) failed, err=%d\n", | |
| __func__, vreg->name, ua, ret); | |
| } | |
| return ret; | |
| } | |
| static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba, | |
| struct ufs_vreg *vreg) | |
| { | |
| return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA); | |
| } | |
| static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, | |
| struct ufs_vreg *vreg) | |
| { | |
| if (!vreg) | |
| return 0; | |
| return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA); | |
| } | |
| static int ufshcd_config_vreg(struct device *dev, | |
| struct ufs_vreg *vreg, bool on) | |
| { | |
| if (regulator_count_voltages(vreg->reg) <= 0) | |
| return 0; | |
| return ufshcd_config_vreg_load(dev, vreg, on ? vreg->max_uA : 0); | |
| } | |
| static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg) | |
| { | |
| int ret = 0; | |
| if (!vreg || vreg->enabled) | |
| goto out; | |
| ret = ufshcd_config_vreg(dev, vreg, true); | |
| if (!ret) | |
| ret = regulator_enable(vreg->reg); | |
| if (!ret) | |
| vreg->enabled = true; | |
| else | |
| dev_err(dev, "%s: %s enable failed, err=%d\n", | |
| __func__, vreg->name, ret); | |
| out: | |
| return ret; | |
| } | |
| static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg) | |
| { | |
| int ret = 0; | |
| if (!vreg || !vreg->enabled || vreg->always_on) | |
| goto out; | |
| ret = regulator_disable(vreg->reg); | |
| if (!ret) { | |
| /* ignore errors on applying disable config */ | |
| ufshcd_config_vreg(dev, vreg, false); | |
| vreg->enabled = false; | |
| } else { | |
| dev_err(dev, "%s: %s disable failed, err=%d\n", | |
| __func__, vreg->name, ret); | |
| } | |
| out: | |
| return ret; | |
| } | |
| static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on) | |
| { | |
| int ret = 0; | |
| struct device *dev = hba->dev; | |
| struct ufs_vreg_info *info = &hba->vreg_info; | |
| ret = ufshcd_toggle_vreg(dev, info->vcc, on); | |
| if (ret) | |
| goto out; | |
| ret = ufshcd_toggle_vreg(dev, info->vccq, on); | |
| if (ret) | |
| goto out; | |
| ret = ufshcd_toggle_vreg(dev, info->vccq2, on); | |
| out: | |
| if (ret) { | |
| ufshcd_toggle_vreg(dev, info->vccq2, false); | |
| ufshcd_toggle_vreg(dev, info->vccq, false); | |
| ufshcd_toggle_vreg(dev, info->vcc, false); | |
| } | |
| return ret; | |
| } | |
| static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on) | |
| { | |
| struct ufs_vreg_info *info = &hba->vreg_info; | |
| return ufshcd_toggle_vreg(hba->dev, info->vdd_hba, on); | |
| } | |
| int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg) | |
| { | |
| int ret = 0; | |
| if (!vreg) | |
| goto out; | |
| vreg->reg = devm_regulator_get(dev, vreg->name); | |
| if (IS_ERR(vreg->reg)) { | |
| ret = PTR_ERR(vreg->reg); | |
| dev_err(dev, "%s: %s get failed, err=%d\n", | |
| __func__, vreg->name, ret); | |
| } | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_get_vreg); | |
| static int ufshcd_init_vreg(struct ufs_hba *hba) | |
| { | |
| int ret = 0; | |
| struct device *dev = hba->dev; | |
| struct ufs_vreg_info *info = &hba->vreg_info; | |
| ret = ufshcd_get_vreg(dev, info->vcc); | |
| if (ret) | |
| goto out; | |
| ret = ufshcd_get_vreg(dev, info->vccq); | |
| if (!ret) | |
| ret = ufshcd_get_vreg(dev, info->vccq2); | |
| out: | |
| return ret; | |
| } | |
| static int ufshcd_init_hba_vreg(struct ufs_hba *hba) | |
| { | |
| struct ufs_vreg_info *info = &hba->vreg_info; | |
| return ufshcd_get_vreg(hba->dev, info->vdd_hba); | |
| } | |
| static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on) | |
| { | |
| int ret = 0; | |
| struct ufs_clk_info *clki; | |
| struct list_head *head = &hba->clk_list_head; | |
| ktime_t start = ktime_get(); | |
| bool clk_state_changed = false; | |
| if (list_empty(head)) | |
| goto out; | |
| ret = ufshcd_vops_setup_clocks(hba, on, PRE_CHANGE); | |
| if (ret) | |
| return ret; | |
| list_for_each_entry(clki, head, list) { | |
| if (!IS_ERR_OR_NULL(clki->clk)) { | |
| /* | |
| * Don't disable clocks which are needed | |
| * to keep the link active. | |
| */ | |
| if (ufshcd_is_link_active(hba) && | |
| clki->keep_link_active) | |
| continue; | |
| clk_state_changed = on ^ clki->enabled; | |
| if (on && !clki->enabled) { | |
| ret = clk_prepare_enable(clki->clk); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: %s prepare enable failed, %d\n", | |
| __func__, clki->name, ret); | |
| goto out; | |
| } | |
| } else if (!on && clki->enabled) { | |
| clk_disable_unprepare(clki->clk); | |
| } | |
| clki->enabled = on; | |
| dev_dbg(hba->dev, "%s: clk: %s %sabled\n", __func__, | |
| clki->name, on ? "en" : "dis"); | |
| } | |
| } | |
| ret = ufshcd_vops_setup_clocks(hba, on, POST_CHANGE); | |
| if (ret) | |
| return ret; | |
| if (!ufshcd_is_clkscaling_supported(hba)) | |
| ufshcd_pm_qos_update(hba, on); | |
| out: | |
| if (ret) { | |
| list_for_each_entry(clki, head, list) { | |
| if (!IS_ERR_OR_NULL(clki->clk) && clki->enabled) | |
| clk_disable_unprepare(clki->clk); | |
| } | |
| } else if (!ret && on && hba->clk_gating.is_initialized) { | |
| scoped_guard(spinlock_irqsave, &hba->clk_gating.lock) | |
| hba->clk_gating.state = CLKS_ON; | |
| trace_ufshcd_clk_gating(hba, | |
| hba->clk_gating.state); | |
| } | |
| if (clk_state_changed) | |
| trace_ufshcd_profile_clk_gating(hba, | |
| (on ? "on" : "off"), | |
| ktime_to_us(ktime_sub(ktime_get(), start)), ret); | |
| return ret; | |
| } | |
| static enum ufs_ref_clk_freq ufshcd_parse_ref_clk_property(struct ufs_hba *hba) | |
| { | |
| u32 freq; | |
| int ret = device_property_read_u32(hba->dev, "ref-clk-freq", &freq); | |
| if (ret) { | |
| dev_dbg(hba->dev, "Cannot query 'ref-clk-freq' property = %d", ret); | |
| return REF_CLK_FREQ_INVAL; | |
| } | |
| return ufs_get_bref_clk_from_hz(freq); | |
| } | |
| static int ufshcd_init_clocks(struct ufs_hba *hba) | |
| { | |
| int ret = 0; | |
| struct ufs_clk_info *clki; | |
| struct device *dev = hba->dev; | |
| struct list_head *head = &hba->clk_list_head; | |
| if (list_empty(head)) | |
| goto out; | |
| list_for_each_entry(clki, head, list) { | |
| if (!clki->name) | |
| continue; | |
| clki->clk = devm_clk_get(dev, clki->name); | |
| if (IS_ERR(clki->clk)) { | |
| ret = PTR_ERR(clki->clk); | |
| dev_err(dev, "%s: %s clk get failed, %d\n", | |
| __func__, clki->name, ret); | |
| goto out; | |
| } | |
| /* | |
| * Parse device ref clk freq as per device tree "ref_clk". | |
| * Default dev_ref_clk_freq is set to REF_CLK_FREQ_INVAL | |
| * in ufshcd_alloc_host(). | |
| */ | |
| if (!strcmp(clki->name, "ref_clk")) | |
| ufshcd_parse_dev_ref_clk_freq(hba, clki->clk); | |
| if (clki->max_freq) { | |
| ret = clk_set_rate(clki->clk, clki->max_freq); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n", | |
| __func__, clki->name, | |
| clki->max_freq, ret); | |
| goto out; | |
| } | |
| clki->curr_freq = clki->max_freq; | |
| } | |
| dev_dbg(dev, "%s: clk: %s, rate: %lu\n", __func__, | |
| clki->name, clk_get_rate(clki->clk)); | |
| } | |
| /* Set Max. frequency for all clocks */ | |
| if (hba->use_pm_opp) { | |
| ret = ufshcd_opp_set_rate(hba, ULONG_MAX); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: failed to set OPP: %d", __func__, | |
| ret); | |
| goto out; | |
| } | |
| } | |
| out: | |
| return ret; | |
| } | |
| static int ufshcd_variant_hba_init(struct ufs_hba *hba) | |
| { | |
| int err = ufshcd_vops_init(hba); | |
| if (err) | |
| dev_err_probe(hba->dev, err, | |
| "%s: variant %s init failed with err %d\n", | |
| __func__, ufshcd_get_var_name(hba), err); | |
| return err; | |
| } | |
| static int ufshcd_hba_init(struct ufs_hba *hba) | |
| { | |
| int err; | |
| /* | |
| * Handle host controller power separately from the UFS device power | |
| * rails as it will help controlling the UFS host controller power | |
| * collapse easily which is different than UFS device power collapse. | |
| * Also, enable the host controller power before we go ahead with rest | |
| * of the initialization here. | |
| */ | |
| err = ufshcd_init_hba_vreg(hba); | |
| if (err) | |
| goto out; | |
| err = ufshcd_setup_hba_vreg(hba, true); | |
| if (err) | |
| goto out; | |
| err = ufshcd_init_clocks(hba); | |
| if (err) | |
| goto out_disable_hba_vreg; | |
| if (hba->dev_ref_clk_freq == REF_CLK_FREQ_INVAL) | |
| hba->dev_ref_clk_freq = ufshcd_parse_ref_clk_property(hba); | |
| err = ufshcd_setup_clocks(hba, true); | |
| if (err) | |
| goto out_disable_hba_vreg; | |
| err = ufshcd_init_vreg(hba); | |
| if (err) | |
| goto out_disable_clks; | |
| err = ufshcd_setup_vreg(hba, true); | |
| if (err) | |
| goto out_disable_clks; | |
| err = ufshcd_variant_hba_init(hba); | |
| if (err) | |
| goto out_disable_vreg; | |
| ufs_debugfs_hba_init(hba); | |
| ufs_fault_inject_hba_init(hba); | |
| hba->is_powered = true; | |
| goto out; | |
| out_disable_vreg: | |
| ufshcd_setup_vreg(hba, false); | |
| out_disable_clks: | |
| ufshcd_setup_clocks(hba, false); | |
| out_disable_hba_vreg: | |
| ufshcd_setup_hba_vreg(hba, false); | |
| out: | |
| return err; | |
| } | |
| static void ufshcd_hba_exit(struct ufs_hba *hba) | |
| { | |
| if (hba->is_powered) { | |
| ufshcd_pm_qos_exit(hba); | |
| ufshcd_exit_clk_scaling(hba); | |
| ufshcd_exit_clk_gating(hba); | |
| if (hba->eh_wq) | |
| destroy_workqueue(hba->eh_wq); | |
| ufs_debugfs_hba_exit(hba); | |
| ufshcd_vops_exit(hba); | |
| ufshcd_setup_vreg(hba, false); | |
| ufshcd_setup_clocks(hba, false); | |
| ufshcd_setup_hba_vreg(hba, false); | |
| hba->is_powered = false; | |
| ufs_put_device_desc(hba); | |
| } | |
| sysfs_put(hba->dme_qos_sysfs_handle); | |
| } | |
| static int ufshcd_execute_start_stop(struct scsi_device *sdev, | |
| enum ufs_dev_pwr_mode pwr_mode, | |
| struct scsi_sense_hdr *sshdr) | |
| { | |
| const unsigned char cdb[6] = { START_STOP, 0, 0, 0, pwr_mode << 4, 0 }; | |
| struct scsi_failure failure_defs[] = { | |
| { | |
| .allowed = 2, | |
| .result = SCMD_FAILURE_RESULT_ANY, | |
| }, | |
| }; | |
| struct scsi_failures failures = { | |
| .failure_definitions = failure_defs, | |
| }; | |
| const struct scsi_exec_args args = { | |
| .failures = &failures, | |
| .sshdr = sshdr, | |
| .req_flags = BLK_MQ_REQ_PM, | |
| .scmd_flags = SCMD_FAIL_IF_RECOVERING, | |
| }; | |
| return scsi_execute_cmd(sdev, cdb, REQ_OP_DRV_IN, /*buffer=*/NULL, | |
| /*bufflen=*/0, /*timeout=*/10 * HZ, /*retries=*/0, | |
| &args); | |
| } | |
| /** | |
| * ufshcd_set_dev_pwr_mode - sends START STOP UNIT command to set device | |
| * power mode | |
| * @hba: per adapter instance | |
| * @pwr_mode: device power mode to set | |
| * | |
| * Return: 0 if requested power mode is set successfully; | |
| * < 0 if failed to set the requested power mode. | |
| */ | |
| static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, | |
| enum ufs_dev_pwr_mode pwr_mode) | |
| { | |
| struct scsi_sense_hdr sshdr; | |
| struct scsi_device *sdp; | |
| unsigned long flags; | |
| int ret; | |
| spin_lock_irqsave(hba->host->host_lock, flags); | |
| sdp = hba->ufs_device_wlun; | |
| if (sdp && scsi_device_online(sdp)) | |
| ret = scsi_device_get(sdp); | |
| else | |
| ret = -ENODEV; | |
| spin_unlock_irqrestore(hba->host->host_lock, flags); | |
| if (ret) | |
| return ret; | |
| /* | |
| * If scsi commands fail, the scsi mid-layer schedules scsi error- | |
| * handling, which would wait for host to be resumed. Since we know | |
| * we are functional while we are here, skip host resume in error | |
| * handling context. | |
| */ | |
| WRITE_ONCE(hba->host->eh_noresume, 1); | |
| /* | |
| * Current function would be generally called from the power management | |
| * callbacks hence set the RQF_PM flag so that it doesn't resume the | |
| * already suspended childs. | |
| */ | |
| ret = ufshcd_execute_start_stop(sdp, pwr_mode, &sshdr); | |
| if (ret) { | |
| sdev_printk(KERN_WARNING, sdp, | |
| "START_STOP failed for power mode: %d, result %x\n", | |
| pwr_mode, ret); | |
| if (ret > 0) { | |
| if (scsi_sense_valid(&sshdr)) | |
| scsi_print_sense_hdr(sdp, NULL, &sshdr); | |
| ret = -EIO; | |
| } | |
| } else { | |
| hba->curr_dev_pwr_mode = pwr_mode; | |
| } | |
| scsi_device_put(sdp); | |
| WRITE_ONCE(hba->host->eh_noresume, 0); | |
| return ret; | |
| } | |
| static int ufshcd_link_state_transition(struct ufs_hba *hba, | |
| enum uic_link_state req_link_state, | |
| bool check_for_bkops) | |
| { | |
| int ret = 0; | |
| if (req_link_state == hba->uic_link_state) | |
| return 0; | |
| if (req_link_state == UIC_LINK_HIBERN8_STATE) { | |
| ret = ufshcd_uic_hibern8_enter(hba); | |
| if (!ret) { | |
| ufshcd_set_link_hibern8(hba); | |
| } else { | |
| dev_err(hba->dev, "%s: hibern8 enter failed %d\n", | |
| __func__, ret); | |
| goto out; | |
| } | |
| } | |
| /* | |
| * If autobkops is enabled, link can't be turned off because | |
| * turning off the link would also turn off the device, except in the | |
| * case of DeepSleep where the device is expected to remain powered. | |
| */ | |
| else if ((req_link_state == UIC_LINK_OFF_STATE) && | |
| (!check_for_bkops || !hba->auto_bkops_enabled)) { | |
| /* | |
| * Let's make sure that link is in low power mode, we are doing | |
| * this currently by putting the link in Hibern8. Otherway to | |
| * put the link in low power mode is to send the DME end point | |
| * to device and then send the DME reset command to local | |
| * unipro. But putting the link in hibern8 is much faster. | |
| * | |
| * Note also that putting the link in Hibern8 is a requirement | |
| * for entering DeepSleep. | |
| */ | |
| ret = ufshcd_uic_hibern8_enter(hba); | |
| if (ret) { | |
| dev_err(hba->dev, "%s: hibern8 enter failed %d\n", | |
| __func__, ret); | |
| goto out; | |
| } | |
| /* | |
| * Change controller state to "reset state" which | |
| * should also put the link in off/reset state | |
| */ | |
| ufshcd_hba_stop(hba); | |
| /* | |
| * TODO: Check if we need any delay to make sure that | |
| * controller is reset | |
| */ | |
| ufshcd_set_link_off(hba); | |
| } | |
| out: | |
| return ret; | |
| } | |
| static void ufshcd_vreg_set_lpm(struct ufs_hba *hba) | |
| { | |
| bool vcc_off = false; | |
| /* | |
| * It seems some UFS devices may keep drawing more than sleep current | |
| * (atleast for 500us) from UFS rails (especially from VCCQ rail). | |
| * To avoid this situation, add 2ms delay before putting these UFS | |
| * rails in LPM mode. | |
| */ | |
| if (!ufshcd_is_link_active(hba) && | |
| hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM) | |
| usleep_range(2000, 2100); | |
| /* | |
| * If UFS device is either in UFS_Sleep turn off VCC rail to save some | |
| * power. | |
| * | |
| * If UFS device and link is in OFF state, all power supplies (VCC, | |
| * VCCQ, VCCQ2) can be turned off if power on write protect is not | |
| * required. If UFS link is inactive (Hibern8 or OFF state) and device | |
| * is in sleep state, put VCCQ & VCCQ2 rails in LPM mode. | |
| * | |
| * Ignore the error returned by ufshcd_toggle_vreg() as device is anyway | |
| * in low power state which would save some power. | |
| * | |
| * If Write Booster is enabled and the device needs to flush the WB | |
| * buffer OR if bkops status is urgent for WB, keep Vcc on. | |
| */ | |
| if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) && | |
| !hba->dev_info.is_lu_power_on_wp) { | |
| ufshcd_setup_vreg(hba, false); | |
| vcc_off = true; | |
| } else if (!ufshcd_is_ufs_dev_active(hba)) { | |
| ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false); | |
| vcc_off = true; | |
| if (ufshcd_is_link_hibern8(hba) || ufshcd_is_link_off(hba)) { | |
| ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq); | |
| ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2); | |
| } | |
| } | |
| /* | |
| * All UFS devices require delay after VCC power rail is turned-off. | |
| */ | |
| if (vcc_off && hba->vreg_info.vcc && !hba->vreg_info.vcc->always_on) | |
| usleep_range(hba->vcc_off_delay_us, | |
| hba->vcc_off_delay_us + 100); | |
| } | |
| #ifdef CONFIG_PM | |
| static int ufshcd_vreg_set_hpm(struct ufs_hba *hba) | |
| { | |
| bool vcc_on = false; | |
| int ret = 0; | |
| if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) && | |
| !hba->dev_info.is_lu_power_on_wp) { | |
| ret = ufshcd_setup_vreg(hba, true); | |
| vcc_on = true; | |
| } else if (!ufshcd_is_ufs_dev_active(hba)) { | |
| if (!ufshcd_is_link_active(hba)) { | |
| ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq); | |
| if (ret) | |
| goto vcc_disable; | |
| ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq2); | |
| if (ret) | |
| goto vccq_lpm; | |
| } | |
| ret = ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, true); | |
| vcc_on = true; | |
| } | |
| goto out; | |
| vccq_lpm: | |
| ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq); | |
| vcc_disable: | |
| ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false); | |
| out: | |
| /* | |
| * On platforms with a slow VCC ramp-up, a delay is needed after | |
| * turning on VCC to ensure the voltage is stable before the | |
| * reference clock is enabled. | |
| */ | |
| if (hba->quirks & UFSHCD_QUIRK_VCC_ON_DELAY && !ret && vcc_on && | |
| hba->vreg_info.vcc && !hba->vreg_info.vcc->always_on) | |
| usleep_range(1000, 1100); | |
| return ret; | |
| } | |
| #endif /* CONFIG_PM */ | |
| static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba) | |
| { | |
| if (ufshcd_is_link_off(hba) || ufshcd_can_aggressive_pc(hba)) | |
| ufshcd_setup_hba_vreg(hba, false); | |
| } | |
| static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba) | |
| { | |
| if (ufshcd_is_link_off(hba) || ufshcd_can_aggressive_pc(hba)) | |
| ufshcd_setup_hba_vreg(hba, true); | |
| } | |
| static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) | |
| { | |
| int ret = 0; | |
| bool check_for_bkops; | |
| enum ufs_pm_level pm_lvl; | |
| enum ufs_dev_pwr_mode req_dev_pwr_mode; | |
| enum uic_link_state req_link_state; | |
| hba->pm_op_in_progress = true; | |
| if (pm_op != UFS_SHUTDOWN_PM) { | |
| pm_lvl = pm_op == UFS_RUNTIME_PM ? | |
| hba->rpm_lvl : hba->spm_lvl; | |
| req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl); | |
| req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl); | |
| } else { | |
| req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE; | |
| req_link_state = UIC_LINK_OFF_STATE; | |
| } | |
| /* | |
| * If we can't transition into any of the low power modes | |
| * just gate the clocks. | |
| */ | |
| ufshcd_hold(hba); | |
| hba->clk_gating.is_suspended = true; | |
| if (ufshcd_is_clkscaling_supported(hba)) | |
| ufshcd_clk_scaling_suspend(hba, true); | |
| if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE && | |
| req_link_state == UIC_LINK_ACTIVE_STATE) { | |
| ufshcd_disable_auto_bkops(hba); | |
| flush_work(&hba->eeh_work); | |
| cancel_delayed_work_sync(&hba->ufs_rtc_update_work); | |
| goto vops_suspend; | |
| } | |
| if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) && | |
| (req_link_state == hba->uic_link_state)) | |
| goto enable_scaling; | |
| /* UFS device & link must be active before we enter in this function */ | |
| if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) { | |
| /* Wait err handler finish or trigger err recovery */ | |
| if (!ufshcd_eh_in_progress(hba)) | |
| ufshcd_force_error_recovery(hba); | |
| ret = -EBUSY; | |
| goto enable_scaling; | |
| } | |
| if (pm_op == UFS_RUNTIME_PM) { | |
| if (ufshcd_can_autobkops_during_suspend(hba)) { | |
| /* | |
| * The device is idle with no requests in the queue, | |
| * allow background operations if bkops status shows | |
| * that performance might be impacted. | |
| */ | |
| ret = ufshcd_bkops_ctrl(hba); | |
| if (ret) { | |
| /* | |
| * If return err in suspend flow, IO will hang. | |
| * Trigger error handler and break suspend for | |
| * error recovery. | |
| */ | |
| ufshcd_force_error_recovery(hba); | |
| ret = -EBUSY; | |
| goto enable_scaling; | |
| } | |
| } else { | |
| /* make sure that auto bkops is disabled */ | |
| ufshcd_disable_auto_bkops(hba); | |
| } | |
| /* | |
| * If device needs to do BKOP or WB buffer flush during | |
| * Hibern8, keep device power mode as "active power mode" | |
| * and VCC supply. | |
| */ | |
| hba->dev_info.b_rpm_dev_flush_capable = | |
| hba->auto_bkops_enabled || | |
| (((req_link_state == UIC_LINK_HIBERN8_STATE) || | |
| ((req_link_state == UIC_LINK_ACTIVE_STATE) && | |
| ufshcd_is_auto_hibern8_enabled(hba))) && | |
| ufshcd_wb_need_flush(hba)); | |
| } | |
| flush_work(&hba->eeh_work); | |
| cancel_delayed_work_sync(&hba->ufs_rtc_update_work); | |
| ret = ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE); | |
| if (ret) | |
| goto enable_scaling; | |
| if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) { | |
| if (pm_op != UFS_RUNTIME_PM) | |
| /* ensure that bkops is disabled */ | |
| ufshcd_disable_auto_bkops(hba); | |
| if (!hba->dev_info.b_rpm_dev_flush_capable) { | |
| ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode); | |
| if (ret && pm_op != UFS_SHUTDOWN_PM) { | |
| /* | |
| * If return err in suspend flow, IO will hang. | |
| * Trigger error handler and break suspend for | |
| * error recovery. | |
| */ | |
| ufshcd_force_error_recovery(hba); | |
| ret = -EBUSY; | |
| } | |
| if (ret) | |
| goto enable_scaling; | |
| } | |
| } | |
| /* | |
| * In the case of DeepSleep, the device is expected to remain powered | |
| * with the link off, so do not check for bkops. | |
| */ | |
| check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba); | |
| ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops); | |
| if (ret && pm_op != UFS_SHUTDOWN_PM) { | |
| /* | |
| * If return err in suspend flow, IO will hang. | |
| * Trigger error handler and break suspend for | |
| * error recovery. | |
| */ | |
| ufshcd_force_error_recovery(hba); | |
| ret = -EBUSY; | |
| } | |
| if (ret) | |
| goto set_dev_active; | |
| vops_suspend: | |
| /* | |
| * Call vendor specific suspend callback. As these callbacks may access | |
| * vendor specific host controller register space call them before the | |
| * host clocks are ON. | |
| */ | |
| ret = ufshcd_vops_suspend(hba, pm_op, POST_CHANGE); | |
| if (ret) | |
| goto set_link_active; | |
| goto out; | |
| set_link_active: | |
| /* | |
| * Device hardware reset is required to exit DeepSleep. Also, for | |
| * DeepSleep, the link is off so host reset and restore will be done | |
| * further below. | |
| */ | |
| if (ufshcd_is_ufs_dev_deepsleep(hba)) { | |
| ufshcd_device_reset(hba); | |
| WARN_ON(!ufshcd_is_link_off(hba)); | |
| } | |
| if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba)) | |
| ufshcd_set_link_active(hba); | |
| else if (ufshcd_is_link_off(hba)) | |
| ufshcd_host_reset_and_restore(hba); | |
| set_dev_active: | |
| /* Can also get here needing to exit DeepSleep */ | |
| if (ufshcd_is_ufs_dev_deepsleep(hba)) { | |
| ufshcd_device_reset(hba); | |
| ufshcd_host_reset_and_restore(hba); | |
| } | |
| if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE)) | |
| ufshcd_disable_auto_bkops(hba); | |
| enable_scaling: | |
| if (ufshcd_is_clkscaling_supported(hba)) | |
| ufshcd_clk_scaling_suspend(hba, false); | |
| hba->dev_info.b_rpm_dev_flush_capable = false; | |
| out: | |
| if (hba->dev_info.b_rpm_dev_flush_capable) { | |
| schedule_delayed_work(&hba->rpm_dev_flush_recheck_work, | |
| msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS)); | |
| } | |
| if (ret) { | |
| ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret); | |
| hba->clk_gating.is_suspended = false; | |
| ufshcd_release(hba); | |
| } | |
| hba->pm_op_in_progress = false; | |
| return ret; | |
| } | |
| #ifdef CONFIG_PM | |
| static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) | |
| { | |
| int ret; | |
| enum uic_link_state old_link_state = hba->uic_link_state; | |
| hba->pm_op_in_progress = true; | |
| /* | |
| * Call vendor specific resume callback. As these callbacks may access | |
| * vendor specific host controller register space call them when the | |
| * host clocks are ON. | |
| */ | |
| ret = ufshcd_vops_resume(hba, pm_op); | |
| if (ret) | |
| goto out; | |
| /* For DeepSleep, the only supported option is to have the link off */ | |
| WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) && !ufshcd_is_link_off(hba)); | |
| if (ufshcd_is_link_hibern8(hba)) { | |
| ret = ufshcd_uic_hibern8_exit(hba); | |
| if (!ret) { | |
| ufshcd_set_link_active(hba); | |
| } else { | |
| dev_err(hba->dev, "%s: hibern8 exit failed %d\n", | |
| __func__, ret); | |
| /* | |
| * If the h8 exit fails during the runtime resume | |
| * process, it becomes stuck and cannot be recovered | |
| * through the error handler. To fix this, use link | |
| * recovery instead of the error handler. | |
| */ | |
| ret = ufshcd_link_recovery(hba); | |
| if (ret) | |
| goto vendor_suspend; | |
| } | |
| } else if (ufshcd_is_link_off(hba)) { | |
| /* | |
| * A full initialization of the host and the device is | |
| * required since the link was put to off during suspend. | |
| * Note, in the case of DeepSleep, the device will exit | |
| * DeepSleep due to device reset. | |
| */ | |
| ret = ufshcd_reset_and_restore(hba); | |
| /* | |
| * ufshcd_reset_and_restore() should have already | |
| * set the link state as active | |
| */ | |
| if (ret || !ufshcd_is_link_active(hba)) | |
| goto vendor_suspend; | |
| } | |
| if (!ufshcd_is_ufs_dev_active(hba)) { | |
| ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); | |
| if (ret) | |
| goto set_old_link_state; | |
| ufshcd_set_timestamp_attr(hba); | |
| } | |
| schedule_delayed_work(&hba->ufs_rtc_update_work, | |
| msecs_to_jiffies(UFS_RTC_UPDATE_INTERVAL_MS)); | |
| if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) | |
| ufshcd_enable_auto_bkops(hba); | |
| else | |
| /* | |
| * If BKOPs operations are urgently needed at this moment then | |
| * keep auto-bkops enabled or else disable it. | |
| */ | |
| ufshcd_bkops_ctrl(hba); | |
| if (hba->ee_usr_mask) | |
| ufshcd_write_ee_control(hba); | |
| if (ufshcd_is_clkscaling_supported(hba)) | |
| ufshcd_clk_scaling_suspend(hba, false); | |
| if (hba->dev_info.b_rpm_dev_flush_capable) { | |
| hba->dev_info.b_rpm_dev_flush_capable = false; | |
| cancel_delayed_work(&hba->rpm_dev_flush_recheck_work); | |
| } | |
| ufshcd_configure_auto_hibern8(hba); | |
| goto out; | |
| set_old_link_state: | |
| ufshcd_link_state_transition(hba, old_link_state, 0); | |
| vendor_suspend: | |
| ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE); | |
| ufshcd_vops_suspend(hba, pm_op, POST_CHANGE); | |
| out: | |
| if (ret) | |
| ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret); | |
| hba->clk_gating.is_suspended = false; | |
| ufshcd_release(hba); | |
| hba->pm_op_in_progress = false; | |
| return ret; | |
| } | |
| static int ufshcd_wl_runtime_suspend(struct device *dev) | |
| { | |
| struct scsi_device *sdev = to_scsi_device(dev); | |
| struct ufs_hba *hba; | |
| int ret; | |
| ktime_t start = ktime_get(); | |
| hba = shost_priv(sdev->host); | |
| ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM); | |
| if (ret) | |
| dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); | |
| trace_ufshcd_wl_runtime_suspend(hba, ret, | |
| ktime_to_us(ktime_sub(ktime_get(), start)), | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| return ret; | |
| } | |
| static int ufshcd_wl_runtime_resume(struct device *dev) | |
| { | |
| struct scsi_device *sdev = to_scsi_device(dev); | |
| struct ufs_hba *hba; | |
| int ret = 0; | |
| ktime_t start = ktime_get(); | |
| hba = shost_priv(sdev->host); | |
| ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM); | |
| if (ret) | |
| dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); | |
| trace_ufshcd_wl_runtime_resume(hba, ret, | |
| ktime_to_us(ktime_sub(ktime_get(), start)), | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| return ret; | |
| } | |
| #endif | |
| #ifdef CONFIG_PM_SLEEP | |
| static int ufshcd_wl_suspend(struct device *dev) | |
| { | |
| struct scsi_device *sdev = to_scsi_device(dev); | |
| struct ufs_hba *hba; | |
| int ret = 0; | |
| ktime_t start = ktime_get(); | |
| hba = shost_priv(sdev->host); | |
| down(&hba->host_sem); | |
| if (pm_runtime_suspended(dev)) | |
| goto out; | |
| ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM); | |
| if (ret) { | |
| dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); | |
| up(&hba->host_sem); | |
| } | |
| out: | |
| if (!ret) | |
| hba->is_sys_suspended = true; | |
| trace_ufshcd_wl_suspend(hba, ret, | |
| ktime_to_us(ktime_sub(ktime_get(), start)), | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| return ret; | |
| } | |
| static int ufshcd_wl_resume(struct device *dev) | |
| { | |
| struct scsi_device *sdev = to_scsi_device(dev); | |
| struct ufs_hba *hba; | |
| int ret = 0; | |
| ktime_t start = ktime_get(); | |
| hba = shost_priv(sdev->host); | |
| if (pm_runtime_suspended(dev)) | |
| goto out; | |
| ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM); | |
| if (ret) | |
| dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); | |
| out: | |
| trace_ufshcd_wl_resume(hba, ret, | |
| ktime_to_us(ktime_sub(ktime_get(), start)), | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| if (!ret) | |
| hba->is_sys_suspended = false; | |
| up(&hba->host_sem); | |
| return ret; | |
| } | |
| #endif | |
| /** | |
| * ufshcd_suspend - helper function for suspend operations | |
| * @hba: per adapter instance | |
| * | |
| * This function will put disable irqs, turn off clocks | |
| * and set vreg and hba-vreg in lpm mode. | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| static int ufshcd_suspend(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| if (!hba->is_powered) | |
| return 0; | |
| /* | |
| * Disable the host irq as host controller as there won't be any | |
| * host controller transaction expected till resume. | |
| */ | |
| ufshcd_disable_irq(hba); | |
| ret = ufshcd_setup_clocks(hba, false); | |
| if (ret) { | |
| ufshcd_enable_irq(hba); | |
| goto out; | |
| } | |
| if (ufshcd_is_clkgating_allowed(hba)) { | |
| hba->clk_gating.state = CLKS_OFF; | |
| trace_ufshcd_clk_gating(hba, | |
| hba->clk_gating.state); | |
| } | |
| ufshcd_vreg_set_lpm(hba); | |
| /* Put the host controller in low power mode if possible */ | |
| ufshcd_hba_vreg_set_lpm(hba); | |
| ufshcd_pm_qos_update(hba, false); | |
| out: | |
| if (ret) | |
| ufshcd_update_evt_hist(hba, UFS_EVT_SUSPEND_ERR, (u32)ret); | |
| return ret; | |
| } | |
| #ifdef CONFIG_PM | |
| /** | |
| * ufshcd_resume - helper function for resume operations | |
| * @hba: per adapter instance | |
| * | |
| * This function basically turns on the regulators, clocks and | |
| * irqs of the hba. | |
| * | |
| * Return: 0 for success and non-zero for failure. | |
| */ | |
| static int ufshcd_resume(struct ufs_hba *hba) | |
| { | |
| int ret; | |
| if (!hba->is_powered) | |
| return 0; | |
| ufshcd_hba_vreg_set_hpm(hba); | |
| ret = ufshcd_vreg_set_hpm(hba); | |
| if (ret) | |
| goto out; | |
| /* Make sure clocks are enabled before accessing controller */ | |
| ret = ufshcd_setup_clocks(hba, true); | |
| if (ret) | |
| goto disable_vreg; | |
| /* enable the host irq as host controller would be active soon */ | |
| ufshcd_enable_irq(hba); | |
| goto out; | |
| disable_vreg: | |
| ufshcd_vreg_set_lpm(hba); | |
| out: | |
| if (ret) | |
| ufshcd_update_evt_hist(hba, UFS_EVT_RESUME_ERR, (u32)ret); | |
| return ret; | |
| } | |
| #endif /* CONFIG_PM */ | |
| #ifdef CONFIG_PM_SLEEP | |
| /** | |
| * ufshcd_system_suspend - system suspend callback | |
| * @dev: Device associated with the UFS controller. | |
| * | |
| * Executed before putting the system into a sleep state in which the contents | |
| * of main memory are preserved. | |
| * | |
| * Return: 0 for success and non-zero for failure. | |
| */ | |
| int ufshcd_system_suspend(struct device *dev) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| int ret = 0; | |
| ktime_t start = ktime_get(); | |
| if (pm_runtime_suspended(hba->dev)) | |
| goto out; | |
| ret = ufshcd_suspend(hba); | |
| out: | |
| trace_ufshcd_system_suspend(hba, ret, | |
| ktime_to_us(ktime_sub(ktime_get(), start)), | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ufshcd_system_suspend); | |
| /** | |
| * ufshcd_system_resume - system resume callback | |
| * @dev: Device associated with the UFS controller. | |
| * | |
| * Executed after waking the system up from a sleep state in which the contents | |
| * of main memory were preserved. | |
| * | |
| * Return: 0 for success and non-zero for failure. | |
| */ | |
| int ufshcd_system_resume(struct device *dev) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| ktime_t start = ktime_get(); | |
| int ret = 0; | |
| if (pm_runtime_suspended(hba->dev)) | |
| goto out; | |
| ret = ufshcd_resume(hba); | |
| out: | |
| trace_ufshcd_system_resume(hba, ret, | |
| ktime_to_us(ktime_sub(ktime_get(), start)), | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ufshcd_system_resume); | |
| #endif /* CONFIG_PM_SLEEP */ | |
| #ifdef CONFIG_PM | |
| /** | |
| * ufshcd_runtime_suspend - runtime suspend callback | |
| * @dev: Device associated with the UFS controller. | |
| * | |
| * Check the description of ufshcd_suspend() function for more details. | |
| * | |
| * Return: 0 for success and non-zero for failure. | |
| */ | |
| int ufshcd_runtime_suspend(struct device *dev) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| int ret; | |
| ktime_t start = ktime_get(); | |
| ret = ufshcd_suspend(hba); | |
| trace_ufshcd_runtime_suspend(hba, ret, | |
| ktime_to_us(ktime_sub(ktime_get(), start)), | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ufshcd_runtime_suspend); | |
| /** | |
| * ufshcd_runtime_resume - runtime resume routine | |
| * @dev: Device associated with the UFS controller. | |
| * | |
| * This function basically brings controller | |
| * to active state. Following operations are done in this function: | |
| * | |
| * 1. Turn on all the controller related clocks | |
| * 2. Turn ON VCC rail | |
| * | |
| * Return: 0 upon success; < 0 upon failure. | |
| */ | |
| int ufshcd_runtime_resume(struct device *dev) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| int ret; | |
| ktime_t start = ktime_get(); | |
| ret = ufshcd_resume(hba); | |
| trace_ufshcd_runtime_resume(hba, ret, | |
| ktime_to_us(ktime_sub(ktime_get(), start)), | |
| hba->curr_dev_pwr_mode, hba->uic_link_state); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ufshcd_runtime_resume); | |
| #endif /* CONFIG_PM */ | |
| static void ufshcd_wl_shutdown(struct scsi_device *sdev) | |
| { | |
| struct ufs_hba *hba = shost_priv(sdev->host); | |
| down(&hba->host_sem); | |
| hba->shutting_down = true; | |
| up(&hba->host_sem); | |
| /* Turn on everything while shutting down */ | |
| ufshcd_rpm_get_sync(hba); | |
| ufshcd_store_tx_eq_settings(hba); | |
| scsi_device_quiesce(sdev); | |
| shost_for_each_device(sdev, hba->host) { | |
| if (sdev == hba->ufs_device_wlun) | |
| continue; | |
| mutex_lock(&sdev->state_mutex); | |
| scsi_device_set_state(sdev, SDEV_OFFLINE); | |
| mutex_unlock(&sdev->state_mutex); | |
| } | |
| __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM); | |
| /* | |
| * Next, turn off the UFS controller and the UFS regulators. Disable | |
| * clocks. | |
| */ | |
| if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba)) | |
| ufshcd_suspend(hba); | |
| hba->is_powered = false; | |
| } | |
| /** | |
| * ufshcd_remove - de-allocate SCSI host and host memory space | |
| * data structure memory | |
| * @hba: per adapter instance | |
| */ | |
| void ufshcd_remove(struct ufs_hba *hba) | |
| { | |
| if (hba->ufs_device_wlun) | |
| ufshcd_rpm_get_sync(hba); | |
| ufs_hwmon_remove(hba); | |
| ufs_bsg_remove(hba); | |
| ufs_rpmb_remove(hba); | |
| ufs_sysfs_remove_nodes(hba->dev); | |
| cancel_delayed_work_sync(&hba->ufs_rtc_update_work); | |
| blk_mq_destroy_queue(hba->tmf_queue); | |
| blk_put_queue(hba->tmf_queue); | |
| blk_mq_free_tag_set(&hba->tmf_tag_set); | |
| if (hba->scsi_host_added) | |
| scsi_remove_host(hba->host); | |
| /* disable interrupts */ | |
| ufshcd_disable_intr(hba, hba->intr_mask); | |
| ufshcd_hba_stop(hba); | |
| ufshcd_hba_exit(hba); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_remove); | |
| #ifdef CONFIG_PM_SLEEP | |
| int ufshcd_system_freeze(struct device *dev) | |
| { | |
| return ufshcd_system_suspend(dev); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_system_freeze); | |
| int ufshcd_system_restore(struct device *dev) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| int ret; | |
| ret = ufshcd_system_resume(dev); | |
| if (ret) | |
| return ret; | |
| /* Configure UTRL and UTMRL base address registers */ | |
| ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr), | |
| REG_UTP_TRANSFER_REQ_LIST_BASE_L); | |
| ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr), | |
| REG_UTP_TRANSFER_REQ_LIST_BASE_H); | |
| ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr), | |
| REG_UTP_TASK_REQ_LIST_BASE_L); | |
| ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr), | |
| REG_UTP_TASK_REQ_LIST_BASE_H); | |
| /* | |
| * Make sure that UTRL and UTMRL base address registers | |
| * are updated with the latest queue addresses. Only after | |
| * updating these addresses, we can queue the new commands. | |
| */ | |
| ufshcd_readl(hba, REG_UTP_TASK_REQ_LIST_BASE_H); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_system_restore); | |
| int ufshcd_system_thaw(struct device *dev) | |
| { | |
| return ufshcd_system_resume(dev); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_system_thaw); | |
| #endif /* CONFIG_PM_SLEEP */ | |
| /** | |
| * ufshcd_set_dma_mask - Set dma mask based on the controller | |
| * addressing capability | |
| * @hba: per adapter instance | |
| * | |
| * Return: 0 for success, non-zero for failure. | |
| */ | |
| static int ufshcd_set_dma_mask(struct ufs_hba *hba) | |
| { | |
| if (hba->vops && hba->vops->set_dma_mask) | |
| return hba->vops->set_dma_mask(hba); | |
| if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) { | |
| if (!dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(64))) | |
| return 0; | |
| } | |
| return dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(32)); | |
| } | |
| /** | |
| * ufshcd_devres_release - devres cleanup handler, invoked during release of | |
| * hba->dev | |
| * @host: pointer to SCSI host | |
| */ | |
| static void ufshcd_devres_release(void *host) | |
| { | |
| scsi_host_put(host); | |
| } | |
| /** | |
| * ufshcd_alloc_host - allocate Host Bus Adapter (HBA) | |
| * @dev: pointer to device handle | |
| * @hba_handle: driver private handle | |
| * | |
| * Return: 0 on success, non-zero value on failure. | |
| * | |
| * NOTE: There is no corresponding ufshcd_dealloc_host() because this function | |
| * keeps track of its allocations using devres and deallocates everything on | |
| * device removal automatically. | |
| */ | |
| int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) | |
| { | |
| struct Scsi_Host *host; | |
| struct ufs_hba *hba; | |
| int err = 0; | |
| if (!dev) { | |
| dev_err(dev, | |
| "Invalid memory reference for dev is NULL\n"); | |
| err = -ENODEV; | |
| goto out_error; | |
| } | |
| host = scsi_host_alloc(&ufshcd_driver_template, | |
| sizeof(struct ufs_hba)); | |
| if (!host) { | |
| dev_err(dev, "scsi_host_alloc failed\n"); | |
| err = -ENOMEM; | |
| goto out_error; | |
| } | |
| err = devm_add_action_or_reset(dev, ufshcd_devres_release, | |
| host); | |
| if (err) | |
| return err; | |
| host->nr_maps = HCTX_TYPE_POLL + 1; | |
| hba = shost_priv(host); | |
| hba->host = host; | |
| hba->dev = dev; | |
| hba->dev_ref_clk_freq = REF_CLK_FREQ_INVAL; | |
| hba->nop_out_timeout = NOP_OUT_TIMEOUT; | |
| ufshcd_set_sg_entry_size(hba, sizeof(struct ufshcd_sg_entry)); | |
| INIT_LIST_HEAD(&hba->clk_list_head); | |
| INIT_LIST_HEAD(&hba->rpmbs); | |
| spin_lock_init(&hba->outstanding_lock); | |
| *hba_handle = hba; | |
| out_error: | |
| return err; | |
| } | |
| EXPORT_SYMBOL(ufshcd_alloc_host); | |
| /* This function exists because blk_mq_alloc_tag_set() requires this. */ | |
| static blk_status_t ufshcd_queue_tmf(struct blk_mq_hw_ctx *hctx, | |
| const struct blk_mq_queue_data *qd) | |
| { | |
| WARN_ON_ONCE(true); | |
| return BLK_STS_NOTSUPP; | |
| } | |
| static const struct blk_mq_ops ufshcd_tmf_ops = { | |
| .queue_rq = ufshcd_queue_tmf, | |
| }; | |
| static int ufshcd_add_scsi_host(struct ufs_hba *hba) | |
| { | |
| int err; | |
| WARN_ON_ONCE(!hba->host->can_queue); | |
| WARN_ON_ONCE(!hba->host->cmd_per_lun); | |
| if (is_mcq_supported(hba)) { | |
| ufshcd_mcq_enable(hba); | |
| err = ufshcd_alloc_mcq(hba); | |
| if (err) { | |
| /* Continue with SDB mode */ | |
| ufshcd_mcq_disable(hba); | |
| use_mcq_mode = false; | |
| dev_err(hba->dev, "MCQ mode is disabled, err=%d\n", | |
| err); | |
| } | |
| } | |
| if (!is_mcq_supported(hba) && !hba->lsdb_sup) { | |
| dev_err(hba->dev, | |
| "%s: failed to initialize (legacy doorbell mode not supported)\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| err = scsi_add_host(hba->host, hba->dev); | |
| if (err) { | |
| dev_err(hba->dev, "scsi_add_host failed\n"); | |
| return err; | |
| } | |
| hba->scsi_host_added = true; | |
| hba->tmf_tag_set = (struct blk_mq_tag_set) { | |
| .nr_hw_queues = 1, | |
| .queue_depth = hba->nutmrs, | |
| .ops = &ufshcd_tmf_ops, | |
| }; | |
| err = blk_mq_alloc_tag_set(&hba->tmf_tag_set); | |
| if (err < 0) | |
| goto remove_scsi_host; | |
| hba->tmf_queue = blk_mq_alloc_queue(&hba->tmf_tag_set, NULL, NULL); | |
| if (IS_ERR(hba->tmf_queue)) { | |
| err = PTR_ERR(hba->tmf_queue); | |
| goto free_tmf_tag_set; | |
| } | |
| hba->tmf_rqs = devm_kcalloc(hba->dev, hba->nutmrs, | |
| sizeof(*hba->tmf_rqs), GFP_KERNEL); | |
| if (!hba->tmf_rqs) { | |
| err = -ENOMEM; | |
| goto free_tmf_queue; | |
| } | |
| return 0; | |
| free_tmf_queue: | |
| blk_mq_destroy_queue(hba->tmf_queue); | |
| blk_put_queue(hba->tmf_queue); | |
| free_tmf_tag_set: | |
| blk_mq_free_tag_set(&hba->tmf_tag_set); | |
| remove_scsi_host: | |
| if (hba->scsi_host_added) | |
| scsi_remove_host(hba->host); | |
| return err; | |
| } | |
| /** | |
| * ufshcd_init - Driver initialization routine | |
| * @hba: per-adapter instance | |
| * @mmio_base: base register address | |
| * @irq: Interrupt line of device | |
| * | |
| * Return: 0 on success; < 0 on failure. | |
| */ | |
| int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) | |
| { | |
| int err; | |
| struct Scsi_Host *host = hba->host; | |
| struct device *dev = hba->dev; | |
| /* | |
| * dev_set_drvdata() must be called before any callbacks are registered | |
| * that use dev_get_drvdata() (frequency scaling, clock scaling, hwmon, | |
| * sysfs). | |
| */ | |
| dev_set_drvdata(dev, hba); | |
| if (!mmio_base) { | |
| dev_err(hba->dev, | |
| "Invalid memory reference for mmio_base is NULL\n"); | |
| err = -ENODEV; | |
| goto out_error; | |
| } | |
| hba->mmio_base = mmio_base; | |
| hba->irq = irq; | |
| hba->vps = &ufs_hba_vps; | |
| /* | |
| * Initialize clk_gating.lock early since it is being used in | |
| * ufshcd_setup_clocks() | |
| */ | |
| spin_lock_init(&hba->clk_gating.lock); | |
| /* Initialize mutex for PM QoS request synchronization */ | |
| mutex_init(&hba->pm_qos_mutex); | |
| /* | |
| * Set the default power management level for runtime and system PM. | |
| * Host controller drivers can override them in their | |
| * 'ufs_hba_variant_ops::init' callback. | |
| * | |
| * Default power saving mode is to keep UFS link in Hibern8 state | |
| * and UFS device in sleep state. | |
| */ | |
| hba->rpm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state( | |
| UFS_SLEEP_PWR_MODE, | |
| UIC_LINK_HIBERN8_STATE); | |
| hba->spm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state( | |
| UFS_SLEEP_PWR_MODE, | |
| UIC_LINK_HIBERN8_STATE); | |
| /* | |
| * Most ufs devices require 1ms delay after vcc is powered off before | |
| * it can be powered on again. Set the default to 2ms. The platform | |
| * drivers can override this setting as needed. | |
| */ | |
| hba->vcc_off_delay_us = 2000; | |
| err = ufshcd_hba_init(hba); | |
| if (err) | |
| goto out_error; | |
| /* Read capabilities registers */ | |
| err = ufshcd_hba_capabilities(hba); | |
| if (err) | |
| goto out_disable; | |
| /* Get UFS version supported by the controller */ | |
| hba->ufs_version = ufshcd_get_ufs_version(hba); | |
| /* Get Interrupt bit mask per version */ | |
| hba->intr_mask = ufshcd_get_intr_mask(hba); | |
| err = ufshcd_set_dma_mask(hba); | |
| if (err) { | |
| dev_err(hba->dev, "set dma mask failed\n"); | |
| goto out_disable; | |
| } | |
| /* Allocate memory for host memory space */ | |
| err = ufshcd_memory_alloc(hba); | |
| if (err) { | |
| dev_err(hba->dev, "Memory allocation failed\n"); | |
| goto out_disable; | |
| } | |
| /* Configure LRB */ | |
| ufshcd_host_memory_configure(hba); | |
| host->can_queue = hba->nutrs - UFSHCD_NUM_RESERVED; | |
| /* | |
| * Set the queue depth for WLUNs. ufs_get_device_desc() will increase | |
| * host->cmd_per_lun to a larger value. | |
| */ | |
| host->cmd_per_lun = 1; | |
| host->max_id = UFSHCD_MAX_ID; | |
| host->max_lun = UFS_MAX_LUNS; | |
| host->max_channel = UFSHCD_MAX_CHANNEL; | |
| host->unique_id = host->host_no; | |
| host->max_cmd_len = UFS_CDB_SIZE; | |
| host->queuecommand_may_block = !!(hba->caps & UFSHCD_CAP_CLK_GATING); | |
| /* Use default RPM delay if host not set */ | |
| if (host->rpm_autosuspend_delay == 0) | |
| host->rpm_autosuspend_delay = RPM_AUTOSUSPEND_DELAY_MS; | |
| hba->max_pwr_info.is_valid = false; | |
| /* Initialize work queues */ | |
| hba->eh_wq = alloc_ordered_workqueue("ufs_eh_wq_%d", WQ_MEM_RECLAIM, | |
| hba->host->host_no); | |
| if (!hba->eh_wq) { | |
| dev_err(hba->dev, "%s: failed to create eh workqueue\n", | |
| __func__); | |
| err = -ENOMEM; | |
| goto out_disable; | |
| } | |
| INIT_WORK(&hba->eh_work, ufshcd_err_handler); | |
| INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler); | |
| sema_init(&hba->host_sem, 1); | |
| /* Initialize UIC command mutex */ | |
| mutex_init(&hba->uic_cmd_mutex); | |
| /* Initialize mutex for device management commands */ | |
| mutex_init(&hba->dev_cmd.lock); | |
| /* Initialize mutex for exception event control */ | |
| mutex_init(&hba->ee_ctrl_mutex); | |
| mutex_init(&hba->wb_mutex); | |
| init_rwsem(&hba->clk_scaling_lock); | |
| ufshcd_init_clk_gating(hba); | |
| ufshcd_init_clk_scaling(hba); | |
| /* | |
| * In order to avoid any spurious interrupt immediately after | |
| * registering UFS controller interrupt handler, clear any pending UFS | |
| * interrupt status and disable all the UFS interrupts. | |
| */ | |
| ufshcd_writel(hba, ufshcd_readl(hba, REG_INTERRUPT_STATUS), | |
| REG_INTERRUPT_STATUS); | |
| ufshcd_writel(hba, 0, REG_INTERRUPT_ENABLE); | |
| /* | |
| * Make sure that UFS interrupts are disabled and any pending interrupt | |
| * status is cleared before registering UFS interrupt handler. | |
| */ | |
| ufshcd_readl(hba, REG_INTERRUPT_ENABLE); | |
| /* IRQ registration */ | |
| err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); | |
| if (err) { | |
| dev_err(hba->dev, "request irq failed\n"); | |
| goto out_disable; | |
| } else { | |
| hba->is_irq_enabled = true; | |
| } | |
| /* Reset the attached device */ | |
| ufshcd_device_reset(hba); | |
| ufshcd_init_crypto(hba); | |
| /* Host controller enable */ | |
| err = ufshcd_hba_enable(hba); | |
| if (err) { | |
| dev_err(hba->dev, "Host controller enable failed\n"); | |
| ufshcd_print_evt_hist(hba); | |
| ufshcd_print_host_state(hba); | |
| goto out_disable; | |
| } | |
| INIT_DELAYED_WORK(&hba->rpm_dev_flush_recheck_work, ufshcd_rpm_dev_flush_recheck_work); | |
| INIT_DELAYED_WORK(&hba->ufs_rtc_update_work, ufshcd_rtc_work); | |
| /* Set the default auto-hiberate idle timer value to 150 ms */ | |
| if (ufshcd_is_auto_hibern8_supported(hba) && !hba->ahit) { | |
| hba->ahit = FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, 150) | | |
| FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, 3); | |
| } | |
| err = ufshcd_add_scsi_host(hba); | |
| if (err) | |
| goto out_disable; | |
| /* Hold auto suspend until async scan completes */ | |
| pm_runtime_get_sync(dev); | |
| /* | |
| * We are assuming that device wasn't put in sleep/power-down | |
| * state exclusively during the boot stage before kernel. | |
| * This assumption helps avoid doing link startup twice during | |
| * ufshcd_probe_hba(). | |
| */ | |
| ufshcd_set_ufs_dev_active(hba); | |
| /* Initialize hba, detect and initialize UFS device */ | |
| ktime_t probe_start = ktime_get(); | |
| hba->ufshcd_state = UFSHCD_STATE_RESET; | |
| err = ufshcd_link_startup(hba); | |
| if (err) | |
| goto out_disable; | |
| if (hba->mcq_enabled) | |
| ufshcd_config_mcq(hba); | |
| if (hba->quirks & UFSHCD_QUIRK_SKIP_PH_CONFIGURATION) | |
| goto initialized; | |
| /* Debug counters initialization */ | |
| ufshcd_clear_dbg_ufs_stats(hba); | |
| /* UniPro link is active now */ | |
| ufshcd_set_link_active(hba); | |
| /* Verify device initialization by sending NOP OUT UPIU */ | |
| err = ufshcd_verify_dev_init(hba); | |
| if (err) | |
| goto out_disable; | |
| /* Initiate UFS initialization, and waiting until completion */ | |
| err = ufshcd_complete_dev_init(hba); | |
| if (err) | |
| goto out_disable; | |
| err = ufshcd_device_params_init(hba); | |
| if (err) | |
| goto out_disable; | |
| err = ufshcd_post_device_init(hba); | |
| initialized: | |
| ufshcd_process_probe_result(hba, probe_start, err); | |
| if (err) | |
| goto out_disable; | |
| ufs_sysfs_add_nodes(hba->dev); | |
| hba->dme_qos_sysfs_handle = sysfs_get_dirent(hba->dev->kobj.sd, | |
| "dme_qos_notification"); | |
| async_schedule(ufshcd_async_scan, hba); | |
| device_enable_async_suspend(dev); | |
| ufshcd_pm_qos_init(hba); | |
| return 0; | |
| out_disable: | |
| hba->is_irq_enabled = false; | |
| ufshcd_hba_exit(hba); | |
| out_error: | |
| return err > 0 ? -EIO : err; | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_init); | |
| void ufshcd_resume_complete(struct device *dev) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| if (hba->complete_put) { | |
| ufshcd_rpm_put(hba); | |
| hba->complete_put = false; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_resume_complete); | |
| static bool ufshcd_rpm_ok_for_spm(struct ufs_hba *hba) | |
| { | |
| struct device *dev = &hba->ufs_device_wlun->sdev_gendev; | |
| enum ufs_dev_pwr_mode dev_pwr_mode; | |
| enum uic_link_state link_state; | |
| unsigned long flags; | |
| bool res; | |
| spin_lock_irqsave(&dev->power.lock, flags); | |
| dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl); | |
| link_state = ufs_get_pm_lvl_to_link_pwr_state(hba->spm_lvl); | |
| res = pm_runtime_suspended(dev) && | |
| hba->curr_dev_pwr_mode == dev_pwr_mode && | |
| hba->uic_link_state == link_state && | |
| !hba->dev_info.b_rpm_dev_flush_capable; | |
| spin_unlock_irqrestore(&dev->power.lock, flags); | |
| return res; | |
| } | |
| int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm) | |
| { | |
| struct ufs_hba *hba = dev_get_drvdata(dev); | |
| int ret; | |
| /* | |
| * SCSI assumes that runtime-pm and system-pm for scsi drivers | |
| * are same. And it doesn't wake up the device for system-suspend | |
| * if it's runtime suspended. But ufs doesn't follow that. | |
| * Refer ufshcd_resume_complete() | |
| */ | |
| if (hba->ufs_device_wlun) { | |
| /* Prevent runtime suspend */ | |
| ufshcd_rpm_get_noresume(hba); | |
| /* | |
| * Check if already runtime suspended in same state as system | |
| * suspend would be. | |
| */ | |
| if (!rpm_ok_for_spm || !ufshcd_rpm_ok_for_spm(hba)) { | |
| /* RPM state is not ok for SPM, so runtime resume */ | |
| ret = ufshcd_rpm_resume(hba); | |
| if (ret < 0 && ret != -EACCES) { | |
| ufshcd_rpm_put(hba); | |
| return ret; | |
| } | |
| } | |
| hba->complete_put = true; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(__ufshcd_suspend_prepare); | |
| int ufshcd_suspend_prepare(struct device *dev) | |
| { | |
| return __ufshcd_suspend_prepare(dev, true); | |
| } | |
| EXPORT_SYMBOL_GPL(ufshcd_suspend_prepare); | |
| #ifdef CONFIG_PM_SLEEP | |
| static int ufshcd_wl_poweroff(struct device *dev) | |
| { | |
| struct scsi_device *sdev = to_scsi_device(dev); | |
| struct ufs_hba *hba = shost_priv(sdev->host); | |
| __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM); | |
| return 0; | |
| } | |
| #endif | |
| static int ufshcd_wl_probe(struct scsi_device *sdev) | |
| { | |
| struct device *dev = &sdev->sdev_gendev; | |
| if (!is_device_wlun(sdev)) | |
| return -ENODEV; | |
| blk_pm_runtime_init(sdev->request_queue, dev); | |
| pm_runtime_set_autosuspend_delay(dev, 0); | |
| pm_runtime_allow(dev); | |
| return 0; | |
| } | |
| static void ufshcd_wl_remove(struct scsi_device *sdev) | |
| { | |
| struct device *dev = &sdev->sdev_gendev; | |
| pm_runtime_forbid(dev); | |
| } | |
| static const struct dev_pm_ops ufshcd_wl_pm_ops = { | |
| #ifdef CONFIG_PM_SLEEP | |
| .suspend = ufshcd_wl_suspend, | |
| .resume = ufshcd_wl_resume, | |
| .freeze = ufshcd_wl_suspend, | |
| .thaw = ufshcd_wl_resume, | |
| .poweroff = ufshcd_wl_poweroff, | |
| .restore = ufshcd_wl_resume, | |
| #endif | |
| SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL) | |
| }; | |
| static void ufshcd_check_header_layout(void) | |
| { | |
| /* | |
| * gcc compilers before version 10 cannot do constant-folding for | |
| * sub-byte bitfields. Hence skip the layout checks for gcc 9 and | |
| * before. | |
| */ | |
| if (IS_ENABLED(CONFIG_CC_IS_GCC) && CONFIG_GCC_VERSION < 100000) | |
| return; | |
| BUILD_BUG_ON(((u8 *)&(struct request_desc_header){ | |
| .cci = 3})[0] != 3); | |
| BUILD_BUG_ON(((u8 *)&(struct request_desc_header){ | |
| .ehs_length = 2})[1] != 2); | |
| BUILD_BUG_ON(((u8 *)&(struct request_desc_header){ | |
| .enable_crypto = 1})[2] | |
| != 0x80); | |
| BUILD_BUG_ON((((u8 *)&(struct request_desc_header){ | |
| .command_type = 5, | |
| .data_direction = 3, | |
| .interrupt = 1, | |
| })[3]) != ((5 << 4) | (3 << 1) | 1)); | |
| BUILD_BUG_ON(((__le32 *)&(struct request_desc_header){ | |
| .dunl = cpu_to_le32(0xdeadbeef)})[1] != | |
| cpu_to_le32(0xdeadbeef)); | |
| BUILD_BUG_ON(((u8 *)&(struct request_desc_header){ | |
| .ocs = 4})[8] != 4); | |
| BUILD_BUG_ON(((u8 *)&(struct request_desc_header){ | |
| .cds = 5})[9] != 5); | |
| BUILD_BUG_ON(((__le32 *)&(struct request_desc_header){ | |
| .dunu = cpu_to_le32(0xbadcafe)})[3] != | |
| cpu_to_le32(0xbadcafe)); | |
| BUILD_BUG_ON(((u8 *)&(struct utp_upiu_header){ | |
| .iid = 0xf })[4] != 0xf0); | |
| BUILD_BUG_ON(((u8 *)&(struct utp_upiu_header){ | |
| .command_set_type = 0xf })[4] != 0xf); | |
| } | |
| /* | |
| * ufs_dev_wlun_template - describes ufs device wlun | |
| * ufs-device wlun - used to send pm commands | |
| * All luns are consumers of ufs-device wlun. | |
| * | |
| * Currently, no sd driver is present for wluns. | |
| * Hence the no specific pm operations are performed. | |
| * With ufs design, SSU should be sent to ufs-device wlun. | |
| * Hence register a scsi driver for ufs wluns only. | |
| */ | |
| static struct scsi_driver ufs_dev_wlun_template = { | |
| .probe = ufshcd_wl_probe, | |
| .remove = ufshcd_wl_remove, | |
| .shutdown = ufshcd_wl_shutdown, | |
| .gendrv = { | |
| .name = "ufs_device_wlun", | |
| .pm = &ufshcd_wl_pm_ops, | |
| }, | |
| }; | |
| static int __init ufshcd_core_init(void) | |
| { | |
| int ret; | |
| ufshcd_check_header_layout(); | |
| ufs_debugfs_init(); | |
| ret = scsi_register_driver(&ufs_dev_wlun_template); | |
| if (ret) | |
| ufs_debugfs_exit(); | |
| return ret; | |
| } | |
| static void __exit ufshcd_core_exit(void) | |
| { | |
| ufs_debugfs_exit(); | |
| scsi_unregister_driver(&ufs_dev_wlun_template); | |
| } | |
| module_init(ufshcd_core_init); | |
| module_exit(ufshcd_core_exit); | |
| MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>"); | |
| MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>"); | |
| MODULE_DESCRIPTION("Generic UFS host controller driver Core"); | |
| MODULE_SOFTDEP("pre: governor_simpleondemand"); | |
| MODULE_LICENSE("GPL"); |