| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * HD-audio stream operations | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/export.h> | |
| #include <linux/clocksource.h> | |
| #include <sound/compress_driver.h> | |
| #include <sound/core.h> | |
| #include <sound/pcm.h> | |
| #include <sound/hdaudio.h> | |
| #include <sound/hda_register.h> | |
| #include "trace.h" | |
| /* | |
| * the hdac_stream library is intended to be used with the following | |
| * transitions. The states are not formally defined in the code but loosely | |
| * inspired by boolean variables. Note that the 'prepared' field is not used | |
| * in this library but by the callers during the hw_params/prepare transitions | |
| * | |
| * | | |
| * stream_init() | | |
| * v | |
| * +--+-------+ | |
| * | unused | | |
| * +--+----+--+ | |
| * | ^ | |
| * stream_assign() | | stream_release() | |
| * v | | |
| * +--+----+--+ | |
| * | opened | | |
| * +--+----+--+ | |
| * | ^ | |
| * stream_reset() | | | |
| * stream_setup() | | stream_cleanup() | |
| * v | | |
| * +--+----+--+ | |
| * | prepared | | |
| * +--+----+--+ | |
| * | ^ | |
| * stream_start() | | stream_stop() | |
| * v | | |
| * +--+----+--+ | |
| * | running | | |
| * +----------+ | |
| */ | |
| /** | |
| * snd_hdac_get_stream_stripe_ctl - get stripe control value | |
| * @bus: HD-audio core bus | |
| * @substream: PCM substream | |
| */ | |
| int snd_hdac_get_stream_stripe_ctl(struct hdac_bus *bus, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct snd_pcm_runtime *runtime = substream->runtime; | |
| unsigned int channels = runtime->channels, | |
| rate = runtime->rate, | |
| bits_per_sample = runtime->sample_bits, | |
| max_sdo_lines, value, sdo_line; | |
| /* T_AZA_GCAP_NSDO is 1:2 bitfields in GCAP */ | |
| max_sdo_lines = snd_hdac_chip_readl(bus, GCAP) & AZX_GCAP_NSDO; | |
| /* following is from HD audio spec */ | |
| for (sdo_line = max_sdo_lines; sdo_line > 0; sdo_line >>= 1) { | |
| if (rate > 48000) | |
| value = (channels * bits_per_sample * | |
| (rate / 48000)) / sdo_line; | |
| else | |
| value = (channels * bits_per_sample) / sdo_line; | |
| if (value >= bus->sdo_limit) | |
| break; | |
| } | |
| /* stripe value: 0 for 1SDO, 1 for 2SDO, 2 for 4SDO lines */ | |
| return sdo_line >> 1; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_get_stream_stripe_ctl); | |
| /** | |
| * snd_hdac_stream_init - initialize each stream (aka device) | |
| * @bus: HD-audio core bus | |
| * @azx_dev: HD-audio core stream object to initialize | |
| * @idx: stream index number | |
| * @direction: stream direction (SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE) | |
| * @tag: the tag id to assign | |
| * | |
| * Assign the starting bdl address to each stream (device) and initialize. | |
| */ | |
| void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, | |
| int idx, int direction, int tag) | |
| { | |
| azx_dev->bus = bus; | |
| /* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ | |
| azx_dev->sd_addr = bus->remap_addr + (0x20 * idx + 0x80); | |
| /* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */ | |
| azx_dev->sd_int_sta_mask = 1 << idx; | |
| azx_dev->index = idx; | |
| azx_dev->direction = direction; | |
| azx_dev->stream_tag = tag; | |
| snd_hdac_dsp_lock_init(azx_dev); | |
| list_add_tail(&azx_dev->list, &bus->stream_list); | |
| if (bus->spbcap) { | |
| azx_dev->spib_addr = bus->spbcap + AZX_SPB_BASE + | |
| AZX_SPB_INTERVAL * idx + | |
| AZX_SPB_SPIB; | |
| azx_dev->fifo_addr = bus->spbcap + AZX_SPB_BASE + | |
| AZX_SPB_INTERVAL * idx + | |
| AZX_SPB_MAXFIFO; | |
| } | |
| if (bus->drsmcap) | |
| azx_dev->dpibr_addr = bus->drsmcap + AZX_DRSM_BASE + | |
| AZX_DRSM_INTERVAL * idx; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_init); | |
| /** | |
| * snd_hdac_stream_start - start a stream | |
| * @azx_dev: HD-audio core stream to start | |
| * | |
| * Start a stream, set start_wallclk and set the running flag. | |
| */ | |
| void snd_hdac_stream_start(struct hdac_stream *azx_dev) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| int stripe_ctl; | |
| trace_snd_hdac_stream_start(bus, azx_dev); | |
| azx_dev->start_wallclk = snd_hdac_chip_readl(bus, WALLCLK); | |
| /* enable SIE */ | |
| snd_hdac_chip_updatel(bus, INTCTL, | |
| 1 << azx_dev->index, | |
| 1 << azx_dev->index); | |
| /* set stripe control */ | |
| if (azx_dev->stripe) { | |
| if (azx_dev->substream) | |
| stripe_ctl = snd_hdac_get_stream_stripe_ctl(bus, azx_dev->substream); | |
| else | |
| stripe_ctl = 0; | |
| if (bus->access_sdnctl_in_dword) | |
| snd_hdac_stream_updatel(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, | |
| stripe_ctl); | |
| else | |
| snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, | |
| stripe_ctl); | |
| } | |
| /* set DMA start and interrupt mask */ | |
| if (bus->access_sdnctl_in_dword) | |
| snd_hdac_stream_updatel(azx_dev, SD_CTL, | |
| 0, SD_CTL_DMA_START | SD_INT_MASK); | |
| else | |
| snd_hdac_stream_updateb(azx_dev, SD_CTL, | |
| 0, SD_CTL_DMA_START | SD_INT_MASK); | |
| azx_dev->running = true; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_start); | |
| /** | |
| * snd_hdac_stream_clear - helper to clear stream registers and stop DMA transfers | |
| * @azx_dev: HD-audio core stream to stop | |
| */ | |
| static void snd_hdac_stream_clear(struct hdac_stream *azx_dev) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| if (bus->access_sdnctl_in_dword) { | |
| snd_hdac_stream_updatel(azx_dev, SD_CTL, | |
| SD_CTL_DMA_START | SD_INT_MASK, 0); | |
| snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */ | |
| if (azx_dev->stripe) | |
| snd_hdac_stream_updatel(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, 0); | |
| } else { | |
| snd_hdac_stream_updateb(azx_dev, SD_CTL, | |
| SD_CTL_DMA_START | SD_INT_MASK, 0); | |
| snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */ | |
| if (azx_dev->stripe) | |
| snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, 0); | |
| } | |
| azx_dev->running = false; | |
| } | |
| /** | |
| * snd_hdac_stream_stop - stop a stream | |
| * @azx_dev: HD-audio core stream to stop | |
| * | |
| * Stop a stream DMA and disable stream interrupt | |
| */ | |
| void snd_hdac_stream_stop(struct hdac_stream *azx_dev) | |
| { | |
| trace_snd_hdac_stream_stop(azx_dev->bus, azx_dev); | |
| snd_hdac_stream_clear(azx_dev); | |
| /* disable SIE */ | |
| snd_hdac_chip_updatel(azx_dev->bus, INTCTL, 1 << azx_dev->index, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_stop); | |
| /** | |
| * snd_hdac_stop_streams - stop all streams | |
| * @bus: HD-audio core bus | |
| */ | |
| void snd_hdac_stop_streams(struct hdac_bus *bus) | |
| { | |
| struct hdac_stream *stream; | |
| list_for_each_entry(stream, &bus->stream_list, list) | |
| snd_hdac_stream_stop(stream); | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stop_streams); | |
| /** | |
| * snd_hdac_stop_streams_and_chip - stop all streams and chip if running | |
| * @bus: HD-audio core bus | |
| */ | |
| void snd_hdac_stop_streams_and_chip(struct hdac_bus *bus) | |
| { | |
| if (bus->chip_init) { | |
| snd_hdac_stop_streams(bus); | |
| snd_hdac_bus_stop_chip(bus); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stop_streams_and_chip); | |
| /** | |
| * snd_hdac_stream_reset - reset a stream | |
| * @azx_dev: HD-audio core stream to reset | |
| */ | |
| void snd_hdac_stream_reset(struct hdac_stream *azx_dev) | |
| { | |
| unsigned char val; | |
| int dma_run_state; | |
| struct hdac_bus *bus = azx_dev->bus; | |
| snd_hdac_stream_clear(azx_dev); | |
| dma_run_state = snd_hdac_stream_readb(azx_dev, SD_CTL) & SD_CTL_DMA_START; | |
| if (bus->access_sdnctl_in_dword) | |
| snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_CTL_STREAM_RESET); | |
| else | |
| snd_hdac_stream_updateb(azx_dev, SD_CTL, 0, SD_CTL_STREAM_RESET); | |
| /* wait for hardware to report that the stream entered reset */ | |
| snd_hdac_stream_readb_poll(azx_dev, SD_CTL, val, (val & SD_CTL_STREAM_RESET), 3, 300); | |
| if (azx_dev->bus->dma_stop_delay && dma_run_state) | |
| udelay(azx_dev->bus->dma_stop_delay); | |
| if (bus->access_sdnctl_in_dword) | |
| snd_hdac_stream_updatel(azx_dev, SD_CTL, SD_CTL_STREAM_RESET, 0); | |
| else | |
| snd_hdac_stream_updateb(azx_dev, SD_CTL, SD_CTL_STREAM_RESET, 0); | |
| /* wait for hardware to report that the stream is out of reset */ | |
| snd_hdac_stream_readb_poll(azx_dev, SD_CTL, val, !(val & SD_CTL_STREAM_RESET), 3, 300); | |
| /* reset first position - may not be synced with hw at this time */ | |
| if (azx_dev->posbuf) | |
| *azx_dev->posbuf = 0; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_reset); | |
| /** | |
| * snd_hdac_stream_setup - set up the SD for streaming | |
| * @azx_dev: HD-audio core stream to set up | |
| * @code_loading: Whether the stream is for PCM or code-loading. | |
| */ | |
| int snd_hdac_stream_setup(struct hdac_stream *azx_dev, bool code_loading) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| struct snd_pcm_runtime *runtime; | |
| unsigned int val; | |
| u16 reg; | |
| int ret; | |
| if (azx_dev->substream) | |
| runtime = azx_dev->substream->runtime; | |
| else | |
| runtime = NULL; | |
| /* make sure the run bit is zero for SD */ | |
| snd_hdac_stream_clear(azx_dev); | |
| /* program the stream_tag */ | |
| val = snd_hdac_stream_readl(azx_dev, SD_CTL); | |
| val = (val & ~SD_CTL_STREAM_TAG_MASK) | | |
| (azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT); | |
| if (!bus->snoop) | |
| val |= SD_CTL_TRAFFIC_PRIO; | |
| snd_hdac_stream_writel(azx_dev, SD_CTL, val); | |
| /* program the length of samples in cyclic buffer */ | |
| snd_hdac_stream_writel(azx_dev, SD_CBL, azx_dev->bufsize); | |
| /* program the stream format */ | |
| /* this value needs to be the same as the one programmed */ | |
| snd_hdac_stream_writew(azx_dev, SD_FORMAT, azx_dev->format_val); | |
| /* program the stream LVI (last valid index) of the BDL */ | |
| snd_hdac_stream_writew(azx_dev, SD_LVI, azx_dev->frags - 1); | |
| /* program the BDL address */ | |
| /* lower BDL address */ | |
| snd_hdac_stream_writel(azx_dev, SD_BDLPL, (u32)(azx_dev->bdl.addr + bus->addr_offset)); | |
| /* upper BDL address */ | |
| snd_hdac_stream_writel(azx_dev, SD_BDLPU, | |
| upper_32_bits(azx_dev->bdl.addr + bus->addr_offset)); | |
| /* enable the position buffer */ | |
| if (bus->use_posbuf && bus->posbuf.addr) { | |
| if (!(snd_hdac_chip_readl(bus, DPLBASE) & AZX_DPLBASE_ENABLE)) | |
| snd_hdac_chip_writel(bus, DPLBASE, | |
| (u32)(bus->posbuf.addr + bus->addr_offset) | AZX_DPLBASE_ENABLE); | |
| } | |
| /* set the interrupt enable bits in the descriptor control register */ | |
| snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_INT_MASK); | |
| if (!code_loading) { | |
| /* Once SDxFMT is set, the controller programs SDxFIFOS to non-zero value. */ | |
| ret = snd_hdac_stream_readw_poll(azx_dev, SD_FIFOSIZE, reg, | |
| reg & AZX_SD_FIFOSIZE_MASK, 3, 300); | |
| if (ret) | |
| dev_dbg(bus->dev, "polling SD_FIFOSIZE 0x%04x failed: %d\n", | |
| AZX_REG_SD_FIFOSIZE, ret); | |
| azx_dev->fifo_size = reg; | |
| } | |
| /* when LPIB delay correction gives a small negative value, | |
| * we ignore it; currently set the threshold statically to | |
| * 64 frames | |
| */ | |
| if (runtime && runtime->period_size > 64) | |
| azx_dev->delay_negative_threshold = | |
| -frames_to_bytes(runtime, 64); | |
| else | |
| azx_dev->delay_negative_threshold = 0; | |
| /* wallclk has 24Mhz clock source */ | |
| if (runtime) | |
| azx_dev->period_wallclk = (((runtime->period_size * 24000) / | |
| runtime->rate) * 1000); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_setup); | |
| /** | |
| * snd_hdac_stream_cleanup - cleanup a stream | |
| * @azx_dev: HD-audio core stream to clean up | |
| */ | |
| void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev) | |
| { | |
| snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); | |
| snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); | |
| snd_hdac_stream_writel(azx_dev, SD_CTL, 0); | |
| azx_dev->bufsize = 0; | |
| azx_dev->period_bytes = 0; | |
| azx_dev->format_val = 0; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_cleanup); | |
| /** | |
| * snd_hdac_stream_assign - assign a stream for the PCM | |
| * @bus: HD-audio core bus | |
| * @substream: PCM substream to assign | |
| * | |
| * Look for an unused stream for the given PCM substream, assign it | |
| * and return the stream object. If no stream is free, returns NULL. | |
| * The function tries to keep using the same stream object when it's used | |
| * beforehand. Also, when bus->reverse_assign flag is set, the last free | |
| * or matching entry is returned. This is needed for some strange codecs. | |
| */ | |
| struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct hdac_stream *azx_dev; | |
| struct hdac_stream *res = NULL; | |
| /* make a non-zero unique key for the substream */ | |
| int key = (substream->number << 2) | (substream->stream + 1); | |
| if (substream->pcm) | |
| key |= (substream->pcm->device << 16); | |
| guard(spinlock_irq)(&bus->reg_lock); | |
| list_for_each_entry(azx_dev, &bus->stream_list, list) { | |
| if (azx_dev->direction != substream->stream) | |
| continue; | |
| if (azx_dev->opened) | |
| continue; | |
| if (azx_dev->assigned_key == key) { | |
| res = azx_dev; | |
| break; | |
| } | |
| if (!res || bus->reverse_assign) | |
| res = azx_dev; | |
| } | |
| if (res) { | |
| res->opened = 1; | |
| res->running = 0; | |
| res->assigned_key = key; | |
| res->substream = substream; | |
| } | |
| return res; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_assign); | |
| /** | |
| * snd_hdac_stream_release_locked - release the assigned stream | |
| * @azx_dev: HD-audio core stream to release | |
| * | |
| * Release the stream that has been assigned by snd_hdac_stream_assign(). | |
| * The bus->reg_lock needs to be taken at a higher level | |
| */ | |
| void snd_hdac_stream_release_locked(struct hdac_stream *azx_dev) | |
| { | |
| azx_dev->opened = 0; | |
| azx_dev->running = 0; | |
| azx_dev->substream = NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_release_locked); | |
| /** | |
| * snd_hdac_stream_release - release the assigned stream | |
| * @azx_dev: HD-audio core stream to release | |
| * | |
| * Release the stream that has been assigned by snd_hdac_stream_assign(). | |
| */ | |
| void snd_hdac_stream_release(struct hdac_stream *azx_dev) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| guard(spinlock_irq)(&bus->reg_lock); | |
| snd_hdac_stream_release_locked(azx_dev); | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_release); | |
| /** | |
| * snd_hdac_get_stream - return hdac_stream based on stream_tag and | |
| * direction | |
| * | |
| * @bus: HD-audio core bus | |
| * @dir: direction for the stream to be found | |
| * @stream_tag: stream tag for stream to be found | |
| */ | |
| struct hdac_stream *snd_hdac_get_stream(struct hdac_bus *bus, | |
| int dir, int stream_tag) | |
| { | |
| struct hdac_stream *s; | |
| list_for_each_entry(s, &bus->stream_list, list) { | |
| if (s->direction == dir && s->stream_tag == stream_tag) | |
| return s; | |
| } | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_get_stream); | |
| /* | |
| * set up a BDL entry | |
| */ | |
| static int setup_bdle(struct hdac_bus *bus, | |
| struct snd_dma_buffer *dmab, | |
| struct hdac_stream *azx_dev, __le32 **bdlp, | |
| int ofs, int size, int with_ioc) | |
| { | |
| __le32 *bdl = *bdlp; | |
| while (size > 0) { | |
| dma_addr_t addr; | |
| int chunk; | |
| if (azx_dev->frags >= AZX_MAX_BDL_ENTRIES) | |
| return -EINVAL; | |
| addr = snd_sgbuf_get_addr(dmab, ofs); | |
| /* program the address field of the BDL entry */ | |
| bdl[0] = cpu_to_le32((u32)(addr + bus->addr_offset)); | |
| bdl[1] = cpu_to_le32(upper_32_bits(addr + bus->addr_offset)); | |
| /* program the size field of the BDL entry */ | |
| chunk = snd_sgbuf_get_chunk_size(dmab, ofs, size); | |
| /* one BDLE cannot cross 4K boundary on CTHDA chips */ | |
| if (bus->align_bdle_4k) { | |
| u32 remain = 0x1000 - (ofs & 0xfff); | |
| if (chunk > remain) | |
| chunk = remain; | |
| } | |
| bdl[2] = cpu_to_le32(chunk); | |
| /* program the IOC to enable interrupt | |
| * only when the whole fragment is processed | |
| */ | |
| size -= chunk; | |
| bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01); | |
| bdl += 4; | |
| azx_dev->frags++; | |
| ofs += chunk; | |
| } | |
| *bdlp = bdl; | |
| return ofs; | |
| } | |
| /** | |
| * snd_hdac_stream_setup_bdle - set up BDL entries | |
| * @azx_dev: HD-audio core stream to set up | |
| * @dmab: allocated DMA buffer | |
| * @runtime: substream runtime, optional | |
| * | |
| * Set up the buffer descriptor table of the given stream based on the | |
| * period and buffer sizes of the assigned PCM substream. | |
| */ | |
| static int snd_hdac_stream_setup_bdle(struct hdac_stream *azx_dev, struct snd_dma_buffer *dmab, | |
| struct snd_pcm_runtime *runtime) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| int i, ofs, periods, period_bytes; | |
| int pos_adj, pos_align; | |
| __le32 *bdl; | |
| /* reset BDL address */ | |
| snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); | |
| snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); | |
| period_bytes = azx_dev->period_bytes; | |
| periods = azx_dev->bufsize / period_bytes; | |
| /* program the initial BDL entries */ | |
| bdl = (__le32 *)azx_dev->bdl.area; | |
| ofs = 0; | |
| azx_dev->frags = 0; | |
| pos_adj = bus->bdl_pos_adj; | |
| if (runtime && !azx_dev->no_period_wakeup && pos_adj > 0) { | |
| pos_align = pos_adj; | |
| pos_adj = DIV_ROUND_UP(pos_adj * runtime->rate, 48000); | |
| if (!pos_adj) | |
| pos_adj = pos_align; | |
| else | |
| pos_adj = roundup(pos_adj, pos_align); | |
| pos_adj = frames_to_bytes(runtime, pos_adj); | |
| if (pos_adj >= period_bytes) { | |
| dev_warn(bus->dev, "Too big adjustment %d\n", | |
| pos_adj); | |
| pos_adj = 0; | |
| } else { | |
| ofs = setup_bdle(bus, dmab, azx_dev, | |
| &bdl, ofs, pos_adj, true); | |
| if (ofs < 0) | |
| goto error; | |
| } | |
| } else | |
| pos_adj = 0; | |
| for (i = 0; i < periods; i++) { | |
| if (i == periods - 1 && pos_adj) | |
| ofs = setup_bdle(bus, dmab, azx_dev, | |
| &bdl, ofs, period_bytes - pos_adj, 0); | |
| else | |
| ofs = setup_bdle(bus, dmab, azx_dev, | |
| &bdl, ofs, period_bytes, | |
| !azx_dev->no_period_wakeup); | |
| if (ofs < 0) | |
| goto error; | |
| } | |
| return 0; | |
| error: | |
| dev_dbg(bus->dev, "Too many BDL entries: buffer=%d, period=%d\n", | |
| azx_dev->bufsize, period_bytes); | |
| return -EINVAL; | |
| } | |
| /** | |
| * snd_hdac_stream_setup_periods - set up BDL entries | |
| * @azx_dev: HD-audio core stream to set up | |
| * | |
| * Set up the buffer descriptor table of the given stream based on the | |
| * period and buffer sizes of the assigned PCM substream. | |
| */ | |
| int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev) | |
| { | |
| struct snd_pcm_substream *substream = azx_dev->substream; | |
| struct snd_compr_stream *cstream = azx_dev->cstream; | |
| struct snd_pcm_runtime *runtime = NULL; | |
| struct snd_dma_buffer *dmab; | |
| if (substream) { | |
| runtime = substream->runtime; | |
| dmab = snd_pcm_get_dma_buf(substream); | |
| } else if (cstream) { | |
| dmab = snd_pcm_get_dma_buf(cstream); | |
| } else { | |
| WARN(1, "No substream or cstream assigned\n"); | |
| return -EINVAL; | |
| } | |
| return snd_hdac_stream_setup_bdle(azx_dev, dmab, runtime); | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_setup_periods); | |
| /** | |
| * snd_hdac_stream_set_params - set stream parameters | |
| * @azx_dev: HD-audio core stream for which parameters are to be set | |
| * @format_val: format value parameter | |
| * | |
| * Setup the HD-audio core stream parameters from substream of the stream | |
| * and passed format value | |
| */ | |
| int snd_hdac_stream_set_params(struct hdac_stream *azx_dev, | |
| unsigned int format_val) | |
| { | |
| struct snd_pcm_substream *substream = azx_dev->substream; | |
| struct snd_compr_stream *cstream = azx_dev->cstream; | |
| unsigned int bufsize, period_bytes; | |
| unsigned int no_period_wakeup; | |
| int err; | |
| if (substream) { | |
| bufsize = snd_pcm_lib_buffer_bytes(substream); | |
| period_bytes = snd_pcm_lib_period_bytes(substream); | |
| no_period_wakeup = substream->runtime->no_period_wakeup; | |
| } else if (cstream) { | |
| bufsize = cstream->runtime->buffer_size; | |
| period_bytes = cstream->runtime->fragment_size; | |
| no_period_wakeup = 0; | |
| } else { | |
| return -EINVAL; | |
| } | |
| if (bufsize != azx_dev->bufsize || | |
| period_bytes != azx_dev->period_bytes || | |
| format_val != azx_dev->format_val || | |
| no_period_wakeup != azx_dev->no_period_wakeup) { | |
| azx_dev->bufsize = bufsize; | |
| azx_dev->period_bytes = period_bytes; | |
| azx_dev->format_val = format_val; | |
| azx_dev->no_period_wakeup = no_period_wakeup; | |
| err = snd_hdac_stream_setup_periods(azx_dev); | |
| if (err < 0) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_set_params); | |
| static u64 azx_cc_read(struct cyclecounter *cc) | |
| { | |
| struct hdac_stream *azx_dev = container_of(cc, struct hdac_stream, cc); | |
| return snd_hdac_chip_readl(azx_dev->bus, WALLCLK); | |
| } | |
| static void azx_timecounter_init(struct hdac_stream *azx_dev, | |
| bool force, u64 last) | |
| { | |
| struct timecounter *tc = &azx_dev->tc; | |
| struct cyclecounter *cc = &azx_dev->cc; | |
| u64 nsec; | |
| cc->read = azx_cc_read; | |
| cc->mask = CLOCKSOURCE_MASK(32); | |
| /* | |
| * Calculate the optimal mult/shift values. The counter wraps | |
| * around after ~178.9 seconds. | |
| */ | |
| clocks_calc_mult_shift(&cc->mult, &cc->shift, 24000000, | |
| NSEC_PER_SEC, 178); | |
| nsec = 0; /* audio time is elapsed time since trigger */ | |
| timecounter_init(tc, cc, nsec); | |
| if (force) { | |
| /* | |
| * force timecounter to use predefined value, | |
| * used for synchronized starts | |
| */ | |
| tc->cycle_last = last; | |
| } | |
| } | |
| /** | |
| * snd_hdac_stream_timecounter_init - initialize time counter | |
| * @azx_dev: HD-audio core stream (master stream) | |
| * @streams: bit flags of streams to set up | |
| * @start: true for PCM trigger start, false for other cases | |
| * | |
| * Initializes the time counter of streams marked by the bit flags (each | |
| * bit corresponds to the stream index). | |
| * The trigger timestamp of PCM substream assigned to the given stream is | |
| * updated accordingly, too. | |
| */ | |
| void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev, | |
| unsigned int streams, bool start) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| struct snd_pcm_runtime *runtime = azx_dev->substream->runtime; | |
| struct hdac_stream *s; | |
| bool inited = false; | |
| u64 cycle_last = 0; | |
| if (!start) | |
| goto skip; | |
| list_for_each_entry(s, &bus->stream_list, list) { | |
| if ((streams & (1 << s->index))) { | |
| azx_timecounter_init(s, inited, cycle_last); | |
| if (!inited) { | |
| inited = true; | |
| cycle_last = s->tc.cycle_last; | |
| } | |
| } | |
| } | |
| skip: | |
| snd_pcm_gettime(runtime, &runtime->trigger_tstamp); | |
| runtime->trigger_tstamp_latched = true; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_timecounter_init); | |
| /** | |
| * snd_hdac_stream_sync_trigger - turn on/off stream sync register | |
| * @azx_dev: HD-audio core stream (master stream) | |
| * @set: true = set, false = clear | |
| * @streams: bit flags of streams to sync | |
| * @reg: the stream sync register address | |
| */ | |
| void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set, | |
| unsigned int streams, unsigned int reg) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| unsigned int val; | |
| if (!reg) | |
| reg = AZX_REG_SSYNC; | |
| val = _snd_hdac_chip_readl(bus, reg); | |
| if (set) | |
| val |= streams; | |
| else | |
| val &= ~streams; | |
| _snd_hdac_chip_writel(bus, reg, val); | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_sync_trigger); | |
| /** | |
| * snd_hdac_stream_sync - sync with start/stop trigger operation | |
| * @azx_dev: HD-audio core stream (master stream) | |
| * @start: true = start, false = stop | |
| * @streams: bit flags of streams to sync | |
| * | |
| * For @start = true, wait until all FIFOs get ready. | |
| * For @start = false, wait until all RUN bits are cleared. | |
| */ | |
| void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, | |
| unsigned int streams) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| int nwait, timeout; | |
| struct hdac_stream *s; | |
| for (timeout = 5000; timeout; timeout--) { | |
| nwait = 0; | |
| list_for_each_entry(s, &bus->stream_list, list) { | |
| if (!(streams & (1 << s->index))) | |
| continue; | |
| if (start) { | |
| /* check FIFO gets ready */ | |
| if (!(snd_hdac_stream_readb(s, SD_STS) & | |
| SD_STS_FIFO_READY)) | |
| nwait++; | |
| } else { | |
| /* check RUN bit is cleared */ | |
| if (snd_hdac_stream_readb(s, SD_CTL) & | |
| SD_CTL_DMA_START) { | |
| nwait++; | |
| /* | |
| * Perform stream reset if DMA RUN | |
| * bit not cleared within given timeout | |
| */ | |
| if (timeout == 1) | |
| snd_hdac_stream_reset(s); | |
| } | |
| } | |
| } | |
| if (!nwait) | |
| break; | |
| cpu_relax(); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_sync); | |
| /** | |
| * snd_hdac_stream_spbcap_enable - enable SPIB for a stream | |
| * @bus: HD-audio core bus | |
| * @enable: flag to enable/disable SPIB | |
| * @index: stream index for which SPIB need to be enabled | |
| */ | |
| void snd_hdac_stream_spbcap_enable(struct hdac_bus *bus, | |
| bool enable, int index) | |
| { | |
| u32 mask = 0; | |
| if (!bus->spbcap) { | |
| dev_err(bus->dev, "Address of SPB capability is NULL\n"); | |
| return; | |
| } | |
| mask |= (1 << index); | |
| if (enable) | |
| snd_hdac_updatel(bus->spbcap, AZX_REG_SPB_SPBFCCTL, mask, mask); | |
| else | |
| snd_hdac_updatel(bus->spbcap, AZX_REG_SPB_SPBFCCTL, mask, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_spbcap_enable); | |
| /** | |
| * snd_hdac_stream_set_spib - sets the spib value of a stream | |
| * @bus: HD-audio core bus | |
| * @azx_dev: hdac_stream | |
| * @value: spib value to set | |
| */ | |
| int snd_hdac_stream_set_spib(struct hdac_bus *bus, | |
| struct hdac_stream *azx_dev, u32 value) | |
| { | |
| if (!bus->spbcap) { | |
| dev_err(bus->dev, "Address of SPB capability is NULL\n"); | |
| return -EINVAL; | |
| } | |
| writel(value, azx_dev->spib_addr); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_set_spib); | |
| /** | |
| * snd_hdac_stream_drsm_enable - enable DMA resume for a stream | |
| * @bus: HD-audio core bus | |
| * @enable: flag to enable/disable DRSM | |
| * @index: stream index for which DRSM need to be enabled | |
| */ | |
| void snd_hdac_stream_drsm_enable(struct hdac_bus *bus, | |
| bool enable, int index) | |
| { | |
| u32 mask = 0; | |
| if (!bus->drsmcap) { | |
| dev_err(bus->dev, "Address of DRSM capability is NULL\n"); | |
| return; | |
| } | |
| mask |= (1 << index); | |
| if (enable) | |
| snd_hdac_updatel(bus->drsmcap, AZX_REG_DRSM_CTL, mask, mask); | |
| else | |
| snd_hdac_updatel(bus->drsmcap, AZX_REG_DRSM_CTL, mask, 0); | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_drsm_enable); | |
| /* | |
| * snd_hdac_stream_wait_drsm - wait for HW to clear RSM for a stream | |
| * @azx_dev: HD-audio core stream to await RSM for | |
| * | |
| * Returns 0 on success and -ETIMEDOUT upon a timeout. | |
| */ | |
| int snd_hdac_stream_wait_drsm(struct hdac_stream *azx_dev) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| u32 mask, reg; | |
| int ret; | |
| mask = 1 << azx_dev->index; | |
| ret = read_poll_timeout(snd_hdac_reg_readl, reg, !(reg & mask), 250, 2000, false, bus, | |
| bus->drsmcap + AZX_REG_DRSM_CTL); | |
| if (ret) | |
| dev_dbg(bus->dev, "polling RSM 0x%08x failed: %d\n", mask, ret); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_wait_drsm); | |
| /** | |
| * snd_hdac_stream_set_dpibr - sets the dpibr value of a stream | |
| * @bus: HD-audio core bus | |
| * @azx_dev: hdac_stream | |
| * @value: dpib value to set | |
| */ | |
| int snd_hdac_stream_set_dpibr(struct hdac_bus *bus, | |
| struct hdac_stream *azx_dev, u32 value) | |
| { | |
| if (!bus->drsmcap) { | |
| dev_err(bus->dev, "Address of DRSM capability is NULL\n"); | |
| return -EINVAL; | |
| } | |
| writel(value, azx_dev->dpibr_addr); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_set_dpibr); | |
| /** | |
| * snd_hdac_stream_set_lpib - sets the lpib value of a stream | |
| * @azx_dev: hdac_stream | |
| * @value: lpib value to set | |
| */ | |
| int snd_hdac_stream_set_lpib(struct hdac_stream *azx_dev, u32 value) | |
| { | |
| snd_hdac_stream_writel(azx_dev, SD_LPIB, value); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_stream_set_lpib); | |
| #ifdef CONFIG_SND_HDA_DSP_LOADER | |
| /** | |
| * snd_hdac_dsp_prepare - prepare for DSP loading | |
| * @azx_dev: HD-audio core stream used for DSP loading | |
| * @format: HD-audio stream format | |
| * @byte_size: data chunk byte size | |
| * @bufp: allocated buffer | |
| * | |
| * Allocate the buffer for the given size and set up the given stream for | |
| * DSP loading. Returns the stream tag (>= 0), or a negative error code. | |
| */ | |
| int snd_hdac_dsp_prepare(struct hdac_stream *azx_dev, unsigned int format, | |
| unsigned int byte_size, struct snd_dma_buffer *bufp) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| int err; | |
| guard(snd_hdac_dsp_lock)(azx_dev); | |
| scoped_guard(spinlock_irq, &bus->reg_lock) { | |
| if (azx_dev->running || azx_dev->locked) | |
| return -EBUSY; | |
| azx_dev->locked = true; | |
| } | |
| err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, bus->dev, | |
| byte_size, bufp); | |
| if (err < 0) | |
| goto err_alloc; | |
| azx_dev->substream = NULL; | |
| azx_dev->bufsize = byte_size; | |
| /* It is recommended to transfer the firmware in two or more chunks. */ | |
| azx_dev->period_bytes = byte_size / 2; | |
| azx_dev->format_val = format; | |
| azx_dev->no_period_wakeup = 1; | |
| snd_hdac_stream_reset(azx_dev); | |
| err = snd_hdac_stream_setup_bdle(azx_dev, bufp, NULL); | |
| if (err < 0) | |
| goto error; | |
| snd_hdac_stream_setup(azx_dev, true); | |
| return azx_dev->stream_tag; | |
| error: | |
| snd_dma_free_pages(bufp); | |
| err_alloc: | |
| scoped_guard(spinlock_irq, &bus->reg_lock) { | |
| azx_dev->locked = false; | |
| } | |
| return err; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_dsp_prepare); | |
| /** | |
| * snd_hdac_dsp_trigger - start / stop DSP loading | |
| * @azx_dev: HD-audio core stream used for DSP loading | |
| * @start: trigger start or stop | |
| */ | |
| void snd_hdac_dsp_trigger(struct hdac_stream *azx_dev, bool start) | |
| { | |
| if (start) | |
| snd_hdac_stream_start(azx_dev); | |
| else | |
| snd_hdac_stream_stop(azx_dev); | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_dsp_trigger); | |
| /** | |
| * snd_hdac_dsp_cleanup - clean up the stream from DSP loading to normal | |
| * @azx_dev: HD-audio core stream used for DSP loading | |
| * @dmab: buffer used by DSP loading | |
| */ | |
| void snd_hdac_dsp_cleanup(struct hdac_stream *azx_dev, | |
| struct snd_dma_buffer *dmab) | |
| { | |
| struct hdac_bus *bus = azx_dev->bus; | |
| if (!dmab->area || !azx_dev->locked) | |
| return; | |
| guard(snd_hdac_dsp_lock)(azx_dev); | |
| /* reset BDL address */ | |
| snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); | |
| snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); | |
| snd_hdac_stream_writel(azx_dev, SD_CTL, 0); | |
| azx_dev->bufsize = 0; | |
| azx_dev->period_bytes = 0; | |
| azx_dev->format_val = 0; | |
| snd_dma_free_pages(dmab); | |
| dmab->area = NULL; | |
| guard(spinlock_irq)(&bus->reg_lock); | |
| azx_dev->locked = false; | |
| } | |
| EXPORT_SYMBOL_GPL(snd_hdac_dsp_cleanup); | |
| #endif /* CONFIG_SND_HDA_DSP_LOADER */ |