| #!/bin/sh | |
| # SPDX-License-Identifier: GPL-2.0 | |
| # | |
| # Kselftest framework defines: ksft_pass=0, ksft_fail=1, ksft_skip=4 | |
| VERBOSE="${VERBOSE:-1}" | |
| IKCONFIG="/tmp/config-`uname -r`" | |
| KERNEL_IMAGE="/boot/vmlinuz-`uname -r`" | |
| SECURITYFS=$(grep "securityfs" /proc/mounts | awk '{print $2}') | |
| log_info() | |
| { | |
| [ $VERBOSE -ne 0 ] && echo "[INFO] $1" | |
| } | |
| # The ksefltest framework requirement returns 0 for PASS. | |
| log_pass() | |
| { | |
| [ $VERBOSE -ne 0 ] && echo "$1 [PASS]" | |
| exit 0 | |
| } | |
| # The ksefltest framework requirement returns 1 for FAIL. | |
| log_fail() | |
| { | |
| [ $VERBOSE -ne 0 ] && echo "$1 [FAIL]" | |
| exit 1 | |
| } | |
| # The ksefltest framework requirement returns 4 for SKIP. | |
| log_skip() | |
| { | |
| [ $VERBOSE -ne 0 ] && echo "$1" | |
| exit 4 | |
| } | |
| # Check efivar SecureBoot-$(the UUID) and SetupMode-$(the UUID). | |
| # (Based on kdump-lib.sh) | |
| get_efivarfs_secureboot_mode() | |
| { | |
| local efivarfs="/sys/firmware/efi/efivars" | |
| local secure_boot_file="" | |
| local setup_mode_file="" | |
| local secureboot_mode=0 | |
| local setup_mode=0 | |
| # Make sure that efivar_fs is mounted in the normal location | |
| if ! grep -q "^\S\+ $efivarfs efivarfs" /proc/mounts; then | |
| log_info "efivars is not mounted on $efivarfs" | |
| return 0; | |
| fi | |
| secure_boot_file=$(find "$efivarfs" -name SecureBoot-* 2>/dev/null) | |
| setup_mode_file=$(find "$efivarfs" -name SetupMode-* 2>/dev/null) | |
| if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then | |
| secureboot_mode=$(hexdump -v -e '/1 "%d\ "' \ | |
| "$secure_boot_file"|cut -d' ' -f 5) | |
| setup_mode=$(hexdump -v -e '/1 "%d\ "' \ | |
| "$setup_mode_file"|cut -d' ' -f 5) | |
| if [ $secureboot_mode -eq 1 ] && [ $setup_mode -eq 0 ]; then | |
| log_info "secure boot mode enabled (CONFIG_EFIVAR_FS)" | |
| return 1; | |
| fi | |
| fi | |
| return 0; | |
| } | |
| # On powerpc platform, check device-tree property | |
| # /proc/device-tree/ibm,secureboot/os-secureboot-enforcing | |
| # to detect secureboot state. | |
| get_ppc64_secureboot_mode() | |
| { | |
| local secure_boot_file="/proc/device-tree/ibm,secureboot/os-secureboot-enforcing" | |
| # Check for secure boot file existence | |
| if [ -f $secure_boot_file ]; then | |
| log_info "Secureboot is enabled (Device tree)" | |
| return 1; | |
| fi | |
| log_info "Secureboot is not enabled (Device tree)" | |
| return 0; | |
| } | |
| # Return the architecture of the system | |
| get_arch() | |
| { | |
| echo $(arch) | |
| } | |
| # Check efivar SecureBoot-$(the UUID) and SetupMode-$(the UUID). | |
| # The secure boot mode can be accessed as the last integer of | |
| # "od -An -t u1 /sys/firmware/efi/efivars/SecureBoot-*". The efi | |
| # SetupMode can be similarly accessed. | |
| # Return 1 for SecureBoot mode enabled and SetupMode mode disabled. | |
| get_secureboot_mode() | |
| { | |
| local secureboot_mode=0 | |
| local system_arch=$(get_arch) | |
| if [ "$system_arch" == "ppc64le" ]; then | |
| get_ppc64_secureboot_mode | |
| secureboot_mode=$? | |
| else | |
| get_efivarfs_secureboot_mode | |
| secureboot_mode=$? | |
| fi | |
| if [ $secureboot_mode -eq 0 ]; then | |
| log_info "secure boot mode not enabled" | |
| fi | |
| return $secureboot_mode; | |
| } | |
| require_root_privileges() | |
| { | |
| if [ $(id -ru) -ne 0 ]; then | |
| log_skip "requires root privileges" | |
| fi | |
| } | |
| # Look for config option in Kconfig file. | |
| # Return 1 for found and 0 for not found. | |
| kconfig_enabled() | |
| { | |
| local config="$1" | |
| local msg="$2" | |
| grep -E -q $config $IKCONFIG | |
| if [ $? -eq 0 ]; then | |
| log_info "$msg" | |
| return 1 | |
| fi | |
| return 0 | |
| } | |
| # Attempt to get the kernel config first by checking the modules directory | |
| # then via proc, and finally by extracting it from the kernel image or the | |
| # configs.ko using scripts/extract-ikconfig. | |
| # Return 1 for found. | |
| get_kconfig() | |
| { | |
| local proc_config="/proc/config.gz" | |
| local module_dir="/lib/modules/`uname -r`" | |
| local configs_module="$module_dir/kernel/kernel/configs.ko*" | |
| if [ -f $module_dir/config ]; then | |
| IKCONFIG=$module_dir/config | |
| return 1 | |
| fi | |
| if [ ! -f $proc_config ]; then | |
| modprobe configs > /dev/null 2>&1 | |
| fi | |
| if [ -f $proc_config ]; then | |
| cat $proc_config | gunzip > $IKCONFIG 2>/dev/null | |
| if [ $? -eq 0 ]; then | |
| return 1 | |
| fi | |
| fi | |
| local extract_ikconfig="$module_dir/source/scripts/extract-ikconfig" | |
| if [ ! -f $extract_ikconfig ]; then | |
| log_skip "extract-ikconfig not found" | |
| fi | |
| $extract_ikconfig $KERNEL_IMAGE > $IKCONFIG 2>/dev/null | |
| if [ $? -eq 1 ]; then | |
| if [ ! -f $configs_module ]; then | |
| log_skip "CONFIG_IKCONFIG not enabled" | |
| fi | |
| $extract_ikconfig $configs_module > $IKCONFIG | |
| if [ $? -eq 1 ]; then | |
| log_skip "CONFIG_IKCONFIG not enabled" | |
| fi | |
| fi | |
| return 1 | |
| } | |
| # Make sure that securityfs is mounted | |
| mount_securityfs() | |
| { | |
| if [ -z $SECURITYFS ]; then | |
| SECURITYFS=/sys/kernel/security | |
| mount -t securityfs security $SECURITYFS | |
| fi | |
| if [ ! -d "$SECURITYFS" ]; then | |
| log_fail "$SECURITYFS :securityfs is not mounted" | |
| fi | |
| } | |
| # The policy rule format is an "action" followed by key-value pairs. This | |
| # function supports up to two key-value pairs, in any order. | |
| # For example: action func=<keyword> [appraise_type=<type>] | |
| # Return 1 for found and 0 for not found. | |
| check_ima_policy() | |
| { | |
| local action="$1" | |
| local keypair1="$2" | |
| local keypair2="$3" | |
| local ret=0 | |
| mount_securityfs | |
| local ima_policy=$SECURITYFS/ima/policy | |
| if [ ! -e $ima_policy ]; then | |
| log_fail "$ima_policy not found" | |
| fi | |
| if [ -n $keypair2 ]; then | |
| grep -e "^$action.*$keypair1" "$ima_policy" | \ | |
| grep -q -e "$keypair2" | |
| else | |
| grep -q -e "^$action.*$keypair1" "$ima_policy" | |
| fi | |
| # invert "grep -q" result, returning 1 for found. | |
| [ $? -eq 0 ] && ret=1 | |
| return $ret | |
| } |