recipes-kernel/linux/files/0001-dt-bindings-i2c-Add-CP2112-HID-USB-to-SMBus-Bridge.patch

From bf4b67c2f83437fd6f26ed0d96dd23144a746f83 Mon Sep 17 00:00:00 2001
From: Danny Kaehn <danny.kaehn@plexus.com>
Date: Wed, 5 Jun 2024 18:12:44 -0500
Subject: [PATCH] dt-bindings: i2c: Add CP2112 HID USB to SMBus Bridge

This is a USB HID device which includes an I2C controller and 8 GPIO pins.

The binding allows describing the chip's gpio and i2c controller in DT
using the subnodes named "gpio" and "i2c", respectively. This is
intended to be used in configurations where the CP2112 is permanently
connected in hardware.

Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
---
 .../bindings/i2c/silabs,cp2112.yaml           | 105 ++++++++++++++++++
 1 file changed, 105 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml

diff --git a/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
new file mode 100644
index 000000000000..0108f2e43c8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/silabs,cp2112.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/silabs,cp2112.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CP2112 HID USB to SMBus/I2C Bridge
+
+maintainers:
+  - Danny Kaehn <danny.kaehn@plexus.com>
+
+description:
+  The CP2112 is a USB HID device which includes an integrated I2C controller
+  and 8 GPIO pins. Its GPIO pins can each be configured as inputs, open-drain
+  outputs, or push-pull outputs.
+
+properties:
+  compatible:
+    const: usb10c4,ea90
+
+  reg:
+    maxItems: 1
+    description: The USB port number on the host controller
+
+  i2c:
+    description: The SMBus/I2C controller node for the CP2112
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      sda-gpios:
+        maxItems: 1
+
+      scl-gpios:
+        maxItems: 1
+
+      clock-frequency:
+        minimum: 10000
+        default: 100000
+        maximum: 400000
+
+  interrupt-controller: true
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 8
+
+patternProperties:
+  "-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cp2112: device@1 {
+        compatible = "usb10c4,ea90";
+        reg = <1>;
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          sda-gpios = <&cp2112 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+          scl-gpios = <&cp2112 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+          temp@48 {
+            compatible = "national,lm75";
+            reg = <0x48>;
+          };
+        };
+
+        gpio-controller;
+        interrupt-controller;
+        #gpio-cells = <2>;
+        gpio-line-names = "CP2112_SDA", "CP2112_SCL", "TEST2",
+          "TEST3","TEST4", "TEST5", "TEST6";
+
+        fan-rst-hog {
+            gpio-hog;
+            gpios = <7 GPIO_ACTIVE_HIGH>;
+            output-high;
+            line-name = "FAN_RST";
+        };
+      };
+    };
-- 
2.52.0.313.g674ac2bdf7-goog